.. include:: replace.txt .. heading hierarchy: ------------- Chapter ************* Section (#.#) ============= Subsection (#.#.#) ############# Paragraph (no number) .. _Coding style: Coding style ------------ When writing code to be contributed to the |ns3| open source project, we ask that you follow the coding standards, guidelines, and recommendations found below. Clang-format ************ The |ns3| project uses `clang-format `_ to define and enforce the C++ coding style. Clang-format can be easily integrated with modern IDEs or run manually on the command-line. Clang-format installation ========================= Clang-format can be installed using your OS's package manager. Please note that you should install one of the supported versions of clang-format, which are listed in the following section. Supported versions of clang-format ================================== Since each new major version of clang-format can add or modify properties, newer versions of clang-format might produce different outputs compared to previous versions. The following list contains the set of clang-format versions that are verified to produce consistent output among themselves. * clang-format-17 * clang-format-16 * clang-format-15 * clang-format-14 Integration with IDEs ===================== Clang-format can be integrated with modern IDEs (e.g., VS Code) that are able to read the ``.clang-format`` file and automatically format the code on save or on typing. Please refer to the documentation of your IDE for more information. Some examples of IDE integration are provided in `clang-format documentation `_ As an example, VS Code can be configured to automatically format code on save, on paste and on type by enabling the following settings: .. sourcecode:: json { "editor.formatOnSave": true, "editor.formatOnPaste": true, "editor.formatOnType": true, } Clang-format usage in the terminal ================================== In addition to IDE support, clang-format can be manually run on the terminal. To format a file in-place, run the following command: .. sourcecode:: console clang-format -i $FILE To check that a file is well formatted, run the following command on the terminal. If the file is not well formatted, clang-format indicates the lines that need to be formatted. .. sourcecode:: console clang-format --dry-run $FILE Clang-format Git integration ============================ Clang-format can be integrated with Git to reformat existing Git patches, such as pending merge requests on the GitLab repository. The full documentation is available on `clang-format Git integration `_ In addition to Git patches, `clang-format-diff `_ can also be used to reformat existing patches produced with the ``diff`` tool. Disable formatting in specific files or lines ============================================= To disable formatting in specific lines, surround them with the following C++ comments: .. sourcecode:: cpp // clang-format off ... // clang-format on To exclude an entire file from being formatted, surround the whole file with the special comments. check-style-clang-format.py *************************** To facilitate checking and fixing source code files according to the |ns3| coding style, |ns3| maintains the ``check-style-clang-format.py`` Python script (located in ``utils/``). This script is a wrapper to clang-format and provides useful options to check and fix source code files. Additionally, it performs other manual checks and fixes in text files (described below). We recommend running this script over your newly introduced C++ files prior to submission as a Merge Request. The script has multiple modes of operation. By default, the script checks if source code files are well formatted, if there are no #include headers from the same module with the "ns3/" prefix, and text files do not have trailing whitespace nor tabs. The process returns a zero exit code if all files adhere to these rules. If there are files that do not comply with the rules, the process returns a non-zero exit code and lists the respective files. This mode is useful for developers editing their code and for the GitLab CI/CD pipeline to check if the codebase is well formatted. All checks are enabled by default. Users can disable specific checks using the corresponding flags: ``--no-include-prefixes``, ``--no-formatting``, ``--no-whitespace`` and ``--no-tabs``. Additional information about the formatting issues detected by the script can be enabled by adding the ``-v, --verbose`` flag. In addition to checking the files, the script can automatically fix detected issues in-place. This mode is enabled by adding the ``--fix`` flag. The formatting and tabs checks respect clang-format guards, which mark code blocks that should not be checked. Trailing whitespace is always checked regardless of clang-format guards. The complete API of the ``check-style-clang-format.py`` script can be obtained with the following command: .. sourcecode:: console ./utils/check-style-clang-format.py --help For quick-reference, the most used commands are listed below: .. sourcecode:: console # Entire codebase (using paths relative to the ns-3 main directory) ./utils/check-style-clang-format.py --fix . # Entire codebase (using absolute paths) /path/to/utils/check-style-clang-format.py --fix /path/to/ns3 # Specific directory or file /path/to/utils/check-style-clang-format.py --fix absolute_or_relative/path/to/directory_or_file # Modified files git diff --name-only | xargs ./utils/check-style-clang-format.py --fix Clang-tidy ********** The |ns3| project uses `clang-tidy `_ to statically analyze (lint) C++ code and help developers write better code. Clang-tidy can be easily integrated with modern IDEs or run manually on the command-line. The list of clang-tidy checks currently enabled in the |ns3| project is saved on the ``.clang-tidy`` file. The full list of clang-tidy checks and their detailed explanations can be seen in `Clang-tidy checks `_. Clang-tidy installation ======================= Clang-format can be installed using your OS's package manager. Please note that you should install one of the supported versions of clang-format, which are listed in the following section. Minimum clang-tidy version ========================== Since clang-tidy is a linter that analyzes code and outputs errors found during the analysis, developers can use different versions of clang-tidy on the workflow. Newer versions of clang-tidy might produce better results than older versions. Therefore, it is recommended to use the latest version available. To ensure consistency among developers, |ns3| defines a minimum version of clang-tidy, whose warnings must not be ignored. Therefore, developers should, at least, scan their code with the minimum version of clang-tidy. The minimum version is clang-tidy-14. Integration with IDEs ===================== Clang-tidy automatically integrates with modern IDEs (e.g., VS Code) that read the ``.clang-tidy`` file and automatically checks the code of the currently open file. Please refer to the documentation of your IDE for more information. Some examples of IDE integration are provided in `clang-tidy documentation `_ Clang-tidy usage ================ In order to use clang-tidy, |ns3| must first be configured with the flag ``--enable-clang-tidy``. To configure |ns3| with tests, examples and clang-tidy enabled, run the following command: .. sourcecode:: console ./ns3 configure --enable-examples --enable-tests --enable-clang-tidy Due to the integration of clang-tidy with CMake, clang-tidy can be run while building |ns3|. In this way, clang-tidy errors will be shown alongside build errors on the terminal. To build |ns3| and run clang-tidy, run the the following command: .. sourcecode:: console ./ns3 build To run clang-tidy without building |ns3|, use the following commands on the ns-3 main directory: .. sourcecode:: console # Analyze (and fix) a single file with clang-tidy clang-tidy -p cmake-cache/ [--fix] [--format-style=file] [--quiet] $FILE # Analyze (and fix) multiple files in parallel run-clang-tidy -p cmake-cache/ [-fix] [-format] [-quiet] $FILE1 $FILE2 ... # Analyze (and fix) the entire ns-3 codebase in parallel run-clang-tidy -p cmake-cache/ [-fix] [-format] [-quiet] When running clang-tidy, please note that: - Clang-tidy only analyzes implementation files (i.e., ``*.cc`` files). Header files are analyzed when they are included by implementation files, with the ``#include "..."`` directive. - Not all clang-tidy checks provide automatic fixes. For those cases, a manual fix must be made by the developer. - Enabling clang-tidy will add time to the build process (in the order of minutes). Disable clang-tidy analysis in specific lines ============================================= To disable clang-tidy analysis of a particular rule in a specific function, specific clang-tidy comments have to be added to the corresponding function. Please refer to the `official clang-tidy documentation `_ for more information. To disable ``modernize-use-override`` checking on ``func()`` only, use one of the following two "special comment" syntaxes: .. sourcecode:: cpp // // Syntax 1: Comment above the function // // NOLINTNEXTLINE(modernize-use-override) void func(); // // Syntax 2: Trailing comment // void func(); // NOLINT(modernize-use-override) To disable a specific clang-tidy check on a block of code, for instance the ``modernize-use-override`` check, surround the code block with the following "special comments": .. sourcecode:: cpp // NOLINTBEGIN(modernize-use-override) void func1(); void func2(); // NOLINTEND(modernize-use-override) To disable all clang-tidy checks on a block of code, surround it with the following "special comments": .. sourcecode:: cpp // NOLINTBEGIN void func1(); void func2(); // NOLINTEND To exclude an entire file from being checked, surround the whole file with the "special comments". Source code formatting ********************** The |ns3| coding style was changed between the ns-3.36 and ns-3.37 release. Prior to ns-3.37, |ns3| used a base GNU coding style. Since ns-3.37, |ns3| changed the base coding style to what is known in the industry as Allman-style braces, with four-space indentation. In clang-format, this is configured by selecting the ``Microsoft`` base style. The following examples illustrate the style. Indentation =========== Indent code with 4 spaces. When breaking statements into multiple lines, indent the following lines with 4 spaces. .. sourcecode:: cpp void Func() { int x = 1; } Indent constructor's initialization list with 4 spaces. .. sourcecode:: cpp MyClass::MyClass(int x, int y) : m_x(x), m_y(y) { } Do not use tabs in source code. Always use spaces for indentation and alignment. Line endings ============ Files use LF (``\n``) line endings. Column limit ============ Code lines should not extend past 100 characters. This allows reading code in wide-screen monitors without having to scroll horizontally, while also allowing editing two files side-by-side. Braces style ============ Braces should be formatted according to the Allman style. Braces are always on a new line and aligned with the start of the corresponding block. The main body is indented with 4 spaces. Always surround conditional or loop blocks (e.g., ``if``, ``for``, ``while``) with braces, and always add a space before the condition's opening parentheses. .. sourcecode:: cpp void Foo() { if (condition) { // do stuff here } else { // do other stuff here } for (int i = 0; i < 100; i++) { // do loop } while (condition) { // do while } do { // do stuff } while (condition); } Spacing ======= To increase readability, functions, classes and namespaces are separated by one new line. This spacing is optional when declaring variables or functions. Declare one variable per line. Do not mix multiple statements on the same line. Do not add a space between the function name and the opening parentheses. This rule applies to both function (and method) declarations and invocations. .. sourcecode:: cpp void Func(const T&); // OK void Func (const T&); // Not OK Trailing whitespace =================== Source code and text files must not have trailing whitespace. Code alignment ============== To improve code readability, trailing comments should be aligned. .. sourcecode:: cpp int varOne; // Variable one double varTwo; // Variable two The trailing ``\`` character of macros should be aligned to the far right (equal to the column limit). This increases the readability of the macro's body, without forcing unnecessary whitespace diffs on surrounding lines when only one line is changed. .. sourcecode:: cpp #define MY_MACRO(msg) \ do \ { \ std::cout << msg << std::endl; \ } while (false); Class members ============= Definition blocks within a class should be organized in descending order of public exposure, that is: ``static`` > ``public`` > ``protected`` > ``private``. Separate each block with a new line. .. sourcecode:: cpp class MyClass { public: static int m_counter = 0; MyClass(int x, int y); private: int x; int y; }; Function arguments bin packing ============================== Function arguments should be declared in the same line as the function declaration. If the arguments list does not fit the maximum column width, declare each one on a separate line and align them vertically. .. sourcecode:: cpp void ShortFunction(int x, int y); void VeryLongFunctionWithLongArgumentList(int x, int y, int z); The constructor initializers are always declared one per line, with a trailing comma: .. sourcecode:: cpp void MyClass::MyClass(int x, int y) : m_x(x), m_y(y) { } Function return types ===================== In function declarations, return types are declared on the same line. In function implementations, return types are declared on a separate line. .. sourcecode:: cpp // Function declaration void Func(int x, int y); // Function implementation void Func(int x, int y) { // (...) } Templates ========= Template definitions are always declared in a separate line from the main function declaration: .. sourcecode:: cpp template void Func(T t); Naming ====== Name encoding ############# Function, method, and type names should follow the `CamelCase `_ convention: words are joined without spaces and are capitalized. For example, "my computer" is transformed into ``MyComputer``. Do not use all capital letters such as ``MAC`` or ``PHY``, but choose instead ``Mac`` or ``Phy``. Do not use all capital letters, even for acronyms such as ``EDCA``; use ``Edca`` instead. This applies also to two-letter acronyms, such as ``IP`` (which becomes ``Ip``). The goal of the CamelCase convention is to ensure that the words which make up a name can be separated by the eye: the initial Caps fills that role. Use PascalCasing (CamelCase with first letter capitalized) for function, property, event, and class names. Variable names should follow a slight variation on the base CamelCase convention: camelBack. For example, the variable ``user name`` would be named ``userName``. This variation on the basic naming pattern is used to allow a reader to distinguish a variable name from its type. For example, ``UserName userName`` would be used to declare a variable named ``userName`` of type ``UserName``. Global variables should be prefixed with a ``g_`` and member variables (including static member variables) should be prefixed with a ``m_``. The goal of that prefix is to give a reader a sense of where a variable of a given name is declared to allow the reader to locate the variable declaration and infer the variable type from that declaration. Defined types will start with an upper case letter, consist of upper and lower case letters, and may optionally end with a ``_t``. Defined constants (such as static const class members, or enum constants) will be all uppercase letters or numeric digits, with an underscore character separating words. Otherwise, the underscore character should not be used in a variable name. For example, you could declare in your class header ``my-class.h``: .. sourcecode:: cpp typedef int NewTypeOfInt_t; constexpr uint8_t PORT_NUMBER = 17; class MyClass { void MyMethod(int aVar); int m_aVar; static int m_anotherVar; }; and implement in your class file ``my-class.cc``: .. sourcecode:: cpp int MyClass::m_anotherVar = 10; static int g_aStaticVar = 100; int g_aGlobalVar = 1000; void MyClass::MyMethod(int aVar) { m_aVar = aVar; } As an exception to the above, the members of structures do not need to be prefixed with an ``m_``. Finally, do not use `Hungarian notation `_, and do not prefix enums, classes, or delegates with any letter. Choosing names ############## Variable, function, method, and type names should be based on the English language, American spelling. Furthermore, always try to choose descriptive names for them. Types are often english names such as: Packet, Buffer, Mac, or Phy. Functions and methods are often named based on verbs and adjectives: ``GetX``, ``DoDispose``, ``ClearArray``, etc. A long descriptive name which requires a lot of typing is always better than a short name which is hard to decipher. Do not use abbreviations in names unless the abbreviation is really unambiguous and obvious to everyone (e.g., use ``size`` over ``sz``). Do not use short inappropriate names such as foo, bar, or baz. The name of an item should always match its purpose. As such, names such as ``tmp`` to identify a temporary variable, or such as ``i`` to identify a loop index are OK. If you use predicates (that is, functions, variables or methods which return a single boolean value), prefix the name with "is" or "has". File layout and code organization ================================= A class named ``MyClass`` should be declared in a header named ``my-class.h`` and implemented in a source file named ``my-class.cc``. The goal of this naming pattern is to allow a reader to quickly navigate through the |ns3| codebase to locate the source file relevant to a specific type. Each ``my-class.h`` header should start with the following comment to ensure that your code is licensed under the GPL, that the copyright holders are properly identified (typically, you or your employer), and that the actual author of the code is identified. The latter is purely informational and we use it to try to track the most appropriate person to review a patch or fix a bug. Please do not add the "All Rights Reserved" phrase after the copyright statement. .. sourcecode:: cpp /* * Copyright (c) YEAR COPYRIGHTHOLDER * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation; * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Author: MyName */ Below these C-style comments, always include the following which defines a set of header guards (``MY_CLASS_H``) used to avoid multiple header includes, which ensures that your code is included in the |ns3| namespace and which provides a set of Doxygen comments for the public part of your class API. Detailed information on the set of tags available for doxygen documentation is described in the `Doxygen website `_. .. sourcecode:: cpp #ifndef MY_CLASS_H #define MY_CLASS_H namespace ns3 { /** * \brief short one-line description of the purpose of your class * * A longer description of the purpose of your class after a blank * empty line. */ class MyClass { public: MyClass(); /** * A detailed description of the purpose of the method. * * \param firstParam a short description of the purpose of this parameter * \returns a short description of what is returned from this function. */ int DoSomething(int firstParam); private: /** * Private method doxygen is also recommended */ void MyPrivateMethod(); int m_myPrivateMemberVariable; ///< Brief description of member variable }; } // namespace ns3 #endif // MY_CLASS_H The ``my-class.cc`` file is structured similarly: .. sourcecode:: cpp /* * Copyright (c) YEAR COPYRIGHTHOLDER * * 3-paragraph GPL blurb * * Author: MyName */ #include "my-class.h" namespace ns3 { MyClass::MyClass() { } ... } // namespace ns3 Header file includes ==================== Included header files should be organized by source location. The sorting order is as follows: .. sourcecode:: cpp // Header class (applicable for *.cc files) #include "my-class.h" // Includes from the same module #include "header-from-same-module.h" // Includes from other modules #include "ns3/header-from-different-module.h" // External headers (e.g., STL libraries) #include Groups should be separated by a new line. Within each group, headers should be sorted alphabetically. For standard headers, use the C++ style of inclusion: .. sourcecode:: cpp #include // OK #include // Avoid - inside .h files, always use .. sourcecode:: cpp #include - inside .cc files, use .. sourcecode:: cpp #include "header.h" if file is in same directory, otherwise use .. sourcecode:: cpp #include Variables and constants ======================= Each variable declaration is on a separate line. Variables should be declared at the point in the code where they are needed, and should be assigned an initial value at the time of declaration. .. sourcecode:: cpp // Do not declare multiple variables per line int x, y; // Declare one variable per line and assign an initial value int x = 0; int y = 0; Named constants defined in classes should be declared as ``static constexpr`` instead of macros, const, or enums. Use of ``static constexpr`` allows a single instance to be evaluated at compile-time. Declaring the constant in the class enables it to share the scope of the class. If the constant is only used in one file, consider declaring the constant in the implementation file (``*.cc``). .. sourcecode:: cpp // Avoid declaring constants as enum class LteRlcAmHeader : public Header { enum ControlPduType_t { STATUS_PDU = 000, }; }; // Prefer to declare them as static constexpr (in class) class LteRlcAmHeader : public Header { static constexpr uint8_t STATUS_PDU{0}; }; // Or as constexpr (in implementation files) constexpr uint8_t STATUS_PDU{0}; When declaring variables that are easily deducible from context, prefer to declare them with ``auto`` instead of repeating the type name. Not only does this improve code readability, by making lines shorter, but it also facilitates future code refactoring. When declaring variables, prefer to use direct-initialization, to avoid repeating the type name. .. sourcecode:: cpp // Avoid repeating the type name when declaring iterators or pointers, and casting variables std::map::const_iterator it = myMap.find(key); int* ptr = new int[10]; uint8_t m = static_cast(97 + (i % 26)); // Prefer to declare them with auto auto it = myMap.find(key); auto* ptr = new int[10]; auto m = static_cast(97 + (i % 26)); // Avoid splitting the declaration and initialization of variables Ipv4Address ipv4Address = Ipv4Address("192.168.0.1") // Prefer to use direct-initialization Ipv4Address ipv4Address("192.168.0.1") Comments ======== The project uses `Doxygen `_ to document the interfaces, and uses comments for improving the clarity of the code internally. All classes, methods, and members should have Doxygen comments. Doxygen comments should use the C-style comment (also known as Javadoc) style. For comments that are intended to not be exposed publicly in the Doxygen output, use the ``@internal`` and ``@endinternal`` tags. Please use the ``@see`` tag for cross-referencing. All parameters and return values should be documented. The |ns3| codebase uses both the ``@`` or ``\`` characters for tag identification; please make sure that usage is consistent within a file. .. sourcecode:: cpp /** * MyClass description. */ class MyClass { /** * Constructor. * * \param n Number of elements. */ MyClass(int n); }; All the functions and variables must be documented, with the exception of member functions inherited from parent classes (the documentation is copied automatically from the parent class), and default constructor/destructor. It is strongly suggested to use grouping to bind together logically related classes (e.g., all the classes in a module). E.g.; .. sourcecode:: cpp /** * \defgroup mynewmodule This is a new module */ /** * \ingroup mynewmodule * * MyClassOne description. */ class MyClassOne { }; /** * \ingroup mynewmodule * * MyClassTwo description. */ class MyClassTwo { }; In the tests for the module, it is suggested to add an ancillary group: .. sourcecode:: cpp /** * \defgroup mynewmodule-test Tests for new module * \ingroup mynewmodule * \ingroup tests */ /** * \ingroup mynewmodule-tests * \brief MyNewModule Test */ class MyNewModuleTest : public TestCase { }; /** * \ingroup mynewmodule-tests * \brief MyNewModule TestSuite */ class MyNewModuleTestSuite : public TestSuite { public: MyNewModuleTestSuite(); }; /** * \ingroup mynewmodule-tests * Static variable for test initialization */ static MyNewModuleTestSuite g_myNewModuleTestSuite; As for comments within the code, comments should be used to describe intention or algorithmic overview where is it not immediately obvious from reading the code alone. There are no minimum comment requirements and small routines probably need no commenting at all, but it is hoped that many larger routines will have commenting to aid future maintainers. Please write complete English sentences and capitalize the first word unless a lower-case identifier begins the sentence. Two spaces after each sentence helps to make emacs sentence commands work. Sometimes ``NS_LOG_DEBUG`` statements can be also used in place of comments. Short one-line comments and long comments can use the C++ comment style; that is, ``//``, but longer comments may use C-style comments. Use one space after ``//`` or ``/*``. .. sourcecode:: cpp /* * A longer comment, * with multiple lines. */ Variable declaration should have a short, one or two line comment describing the purpose of the variable, unless it is a local variable whose use is obvious from the context. The short comment should be on the same line as the variable declaration, unless it is too long, in which case it should be on the preceding lines. .. sourcecode:: cpp int nNodes = 3; // Number of nodes /// Node container with the Wi-Fi stations NodeContainer wifiStations(3); Casts ===== Where casts are necessary, use the Google C++ guidance: "Use C++-style casts like ``static_cast(double_value)``, or brace initialization for conversion of arithmetic types like ``int64 y = int64{1} << 42``." Do not use C-style casts, since they can be unsafe. Try to avoid (and remove current instances of) casting of ``uint8_t`` type to larger integers in our logging output by overriding these types within the logging system itself. Also, the unary ``+`` operator can be used to print the numeric value of any variable, such as: .. sourcecode:: cpp uint8_t flags = 5; std::cout << "Flags numeric value: " << +flags << std::endl; Avoid unnecessary casts if minor changes to variable declarations can solve the issue. In the following example, ``x`` can be declared as ``float`` instead of ``int`` to avoid the cast, or write numbers in decimal format: .. sourcecode:: cpp // Do not declare x as int, to avoid casting it to float int x = 3; float y = 1 / static_cast(x); // Prefer to declare x as float float x = 3.0; float y = 1 / x; // Or use 1.0 instead of just 1 int x = 3; float y = 1.0 / x; Namespaces ========== Code should always be included in a given namespace, namely ``ns3``. In order to avoid exposing internal symbols, consider placing the code in an anonymous namespace, which can only be accessed by functions in the same file. Code within namespaces should not be indented. To more easily identify the end of a namespace, add a trailing comment to its closing brace. .. sourcecode:: cpp namespace ns3 { // (...) } // namespace ns3 Namespace names should follow the snake_case convention. Unused variables ================ Compilers will typically issue warnings on unused entities (e.g., variables, function parameters). Use the ``[[maybe_unused]]`` attribute to suppress such warnings when the entity may be unused depending on how the code is compiled (e.g., if the entity is only used in a logging statement or an assert statement). The general guidelines are as follows: - If a function's or a method's parameter is definitely unused, prefer to leave it unnamed. In the following example, the second parameter is unnamed. .. sourcecode:: cpp void UanMacAloha::RxPacketGood(Ptr pkt, double, UanTxMode txMode) { UanHeaderCommon header; pkt->RemoveHeader(header); ... } In this case, the parameter is also not referenced by Doxygen; e.g.,: .. sourcecode:: cpp /** * Receive packet from lower layer (passed to PHY as callback). * * \param pkt Packet being received. * \param txMode Mode of received packet. */ void RxPacketGood(Ptr pkt, double, UanTxMode txMode); The omission is preferred to commenting out unused parameters, such as: .. sourcecode:: cpp void UanMacAloha::RxPacketGood(Ptr pkt, double /*sinr*/, UanTxMode txMode) { UanHeaderCommon header; pkt->RemoveHeader(header); ... } - If a function's parameter is only used in certain cases (e.g., logging), or it is part of the function's Doxygen, mark it as ``[[maybe_unused]]``. .. sourcecode:: cpp void TcpSocketBase::CompleteFork(Ptr p [[maybe_unused]], const TcpHeader& h, const Address& fromAddress, const Address& toAddress) { NS_LOG_FUNCTION(this << p << h << fromAddress << toAddress); // Remaining code that definitely uses 'h', 'fromAddress' and 'toAddress' ... } - If a local variable saves the result of a function that must always run, but whose value may not be used, declare it ``[[maybe_unused]]``. .. sourcecode:: cpp void MyFunction() { int result [[maybe_unused]] = MandatoryFunction(); NS_LOG_DEBUG("result = " << result); } - If a local variable saves the result of a function that is only run in certain cases, prefer to not declare the variable and use the function's return value directly where needed. This avoids unnecessarily calling the function if its result is not used. .. sourcecode:: cpp void MyFunction() { // Prefer to call GetDebugInfo() directly on the log statement NS_LOG_DEBUG("Debug information: " << GetDebugInfo()); // Avoid declaring a local variable with the result of GetDebugInfo() int debugInfo [[maybe_unused]] = GetDebugInfo(); NS_LOG_DEBUG("Debug information: " << debugInfo); } If the calculation of the maybe unused variable is complex, consider wrapping the calculation of its value in a conditional block that is only run if the variable is used. .. sourcecode:: cpp if (g_log.IsEnabled(ns3::LOG_DEBUG)) { auto debugInfo = GetDebugInfo(); auto value = DoComplexCalculation(debugInfo); NS_LOG_DEBUG("The value is " << value); } Unnecessary else after return ============================= In order to increase readability and avoid deep code nests, consider not adding an ``else`` block if the ``if`` block breaks the control flow (i.e., when using ``return``, ``break``, ``continue``, etc.). For instance, the following code: .. sourcecode:: cpp if (n < 0) { return false; } else { n += 3; return n; } can be rewritten as: .. sourcecode:: cpp if (n < 0) { return false; } n += 3; return n; Boolean Simplifications ======================= In order to increase readability and performance, avoid unnecessarily complex boolean expressions in if statements and variable declarations. For instance, the following code: .. sourcecode:: cpp bool IsPositive(int n) { if (n > 0) { return true; } else { return false; } } void ProcessNumber(int n) { if (IsPositive(n) == true) { ... } } can be rewritten as: .. sourcecode:: cpp bool IsPositive(int n) { return n > 0; } void ProcessNumber(int n) { if (IsPositive(n)) { ... } } Smart pointer boolean comparisons ================================= As explained in this `issue `_, the |ns3| smart pointer class ``Ptr`` should be used in boolean comparisons as follows: .. sourcecode:: cpp for Ptr<> p, do not use: use instead: ======================== ================================= if (p != nullptr) {...} if (p) {...} if (p != NULL) {...} if (p != 0) {...} if (p) {...} if (p == nullptr) {...} if (!p) {...} if (p == NULL) {...} if (p == 0) {...} NS_ASSERT...(p != nullptr, ...) NS_ASSERT...(p, ...) NS_ABORT... (p != nullptr, ...) NS_ABORT... (p, ...) NS_ASSERT...(p == nullptr, ...) NS_ASSERT...(!p, ...) NS_ABORT... (p == nullptr, ...) NS_ABORT... (!p, ...) NS_TEST... (p, nullptr, ...) NS_TEST... (p, nullptr, ...) Code performance tips ===================== While developing code, consider the following tips to improve the code's performance. Some tips are general recommendations, but are not strictly enforced. Other tips are enforced by clang-tidy. Please refer to the clang-tidy section below for more details. - Prefer to use ``.emplace_back()`` over ``.push_back()`` to optimize performance. - When initializing STL containers (e.g., ``std::vector``) with known size, reserve memory to store all items, before pushing them in a loop. .. sourcecode:: cpp constexpr int N_ITEMS = 5; std::vector myVector; myVector.reserve(N_ITEMS); // Reserve memory to store all items for (int i = 0; i < N_ITEMS; i++) { myVector.emplace_back(i); } - Prefer to initialize STL containers (e.g., ``std::vector``, ``std::map``, etc.) directly through the constructor or with a braced-init-list, instead of pushing elements one-by-one. .. sourcecode:: cpp // Prefer to initialize containers directly std::vector myVector1{1, 2, 3}; std::vector myVector2(myVector1.begin(), myVector1.end()); std::vector myVector3(myVector2.size(), true); // Avoid pushing elements one-by-one std::vector myVector1; myVector1.reserve(3); myVector1.emplace_back(1); myVector1.emplace_back(2); myVector1.emplace_back(3); std::vector myVector2; myVector2.reserve(myVector1.size()); for (const auto& v : myVector1) { myVector2.emplace_back(v); } std::vector myVector3; myVector3.reserve(myVector1.size()); for (std::size_t i = 0; i < myVector1.size(); i++) { myVector3.emplace_back(true); } - When looping through containers, prefer to use const-ref syntax over copying elements. .. sourcecode:: cpp std::vector myVector{1, 2, 3}; for (const auto& v : myVector) { ... } // OK for (auto v : myVector) { ... } // Avoid - Prefer to use the ``empty()`` function of STL containers (e.g., ``std::vector``), instead of the condition ``size() > 0``, to avoid unnecessarily calculating the size of the container. - Avoid unnecessary calls to the functions ``.c_str()`` and ``.data()`` of ``std::string``. - Avoid unnecessarily dereferencing std smart pointers (``std::shared_ptr``, ``std::unique_ptr``) with calls to their member function ``.get()``. Prefer to use the std smart pointer directly where needed. .. sourcecode:: cpp auto ptr = std::make_shared(); // OK if (ptr) { ... } // Avoid if (ptr.get()) { ... } - Consider caching frequently-used results (especially expensive calculations, such as mathematical functions) in a temporary variable, instead of calculating them in every loop. .. sourcecode:: cpp // Prefer to cache intermediate results const double sinTheta = std::sin(theta); const double cosTheta = std::cos(theta); for (uint8_t i = 0; i < NUM_VALUES; i++) { double power = std::pow(2, i); array1[i] = (power * sinTheta) + cosTheta; array2[i] = (power * cosTheta) + sinTheta; } // Avoid repeating calculations for (uint8_t i = 0; i < NUM_VALUES; i++) { array1[i] = (std::pow(2, i) * std::sin(theta)) + std::cos(theta); array2[i] = (std::pow(2, i) * std::cos(theta)) + std::sin(theta); } - Do not include inline implementations in header files; put all implementation in a ``.cc`` file (unless implementation in the header file brings demonstrable and significant performance improvement). - Avoid declaring trivial destructors, to optimize performance. C++ standard ============ As of ns-3.36, |ns3| permits the use of C++-17 (or earlier) features in the implementation files. If a developer would like to propose to raise this bar to include more features than this, please email the developers list. We will move this language support forward as our minimally supported compiler moves forward. Guidelines for using maps ========================= Maps (associative containers) are used heavily in ns-3 models to store key/value pairs. The C++ standard, over time, has added various methods to insert elements to maps, and the ns-3 codebase has made use of most or all of these constructs. For the sake of uniformity and readability, the following guidelines are recommended for any new code. Prefer the use of ``std::map`` to ``std::unordered_map`` unless there is a measurable performance advantage. Use ``std::unordered_map`` only for use cases in which the map does not need to be iterated or the iteration order does not affect the results of the operation (because different implementations of the hash function may lead to different iteration orders on different systems). Keep in mind that C++ now allows several methods to insert values into maps, and the behavior can be different when a value already exists for a key. If the intended behavior is that the insertion should not overwrite an existing value for the key, ``try_emplace()`` can be a good choice. If the intention is to allow the overwriting of a key/value pair, ``insert_or_assign()`` can be a good choice. Both of the above methods provide return values that can be checked-- in the case of ``try_emplace()``, whether the insertion succeeded or did not occur, and in the case of ``insert_or_assign()``, whether an insertion or assignment occurred. Miscellaneous items =================== - ``NS_LOG_COMPONENT_DEFINE("log-component-name");`` statements should be placed within ``namespace ns3`` (for module code) and after the ``using namespace ns3;``. In examples, ``NS_OBJECT_ENSURE_REGISTERED()`` should also be placed within ``namespace ns3``. - Pointers and references are left-aligned: .. sourcecode:: cpp int x = 1; int* ptr = &x; int& ref = x; - Use a trailing comma in braced-init-lists, so that each item is positioned in a new line. .. sourcecode:: cpp const std::vector myVector{ "string-1", "string-2", "string-3", }; const std::map myMap{ {1, "string-1"}, {2, "string-2"}, {3, "string-3"}, }; - Const reference syntax: .. sourcecode:: cpp void MySub(const T& t); // OK void MySub(T const& t); // Not OK - Do not use ``NULL``, ``nil`` or ``0`` constants; use ``nullptr`` (improves portability) - Consider whether you want the default constructor, copy constructor, or assignment operator in your class. If not, explicitly mark them as deleted and make the declaration public: .. sourcecode:: cpp class MyClass { public: // Allowed constructors MyClass(int i); // Deleted constructors. // Explain why they are not supported. MyClass() = delete; MyClass(const MyClass&) = delete; MyClass& operator=(const MyClass&) = delete; }; - Avoid returning a reference to an internal or local member of an object: .. sourcecode:: cpp MyType& foo(); // Avoid. Prefer to return a pointer or an object. const MyType& foo(); // Same as above. This guidance does not apply to the use of references to implement operators. - Expose class members through access functions, rather than direct access to a public object. The access functions are typically named ``Get`` and ``Set`` followed by the member's name. For example, a member ``m_delayTime`` might have accessor functions ``GetDelayTime()`` and ``SetDelayTime()``. - Do not bring the C++ standard library namespace into |ns3| source files by using the ``using namespace std;`` directive. - Do not use the C++ ``goto`` statement. - Do not add the ``enum`` or ``struct`` specifiers when declaring the variable's type. - Do not unnecessarily add ``typedef`` to ``struct`` or ``enum``. .. sourcecode:: cpp // Avoid typedef struct { ... } MyStruct; // Prefer struct MyStruct { ... }; Clang-tidy rules ================ Please refer to the ``.clang-tidy`` file in the |ns3| main directory for the full list of rules that should be observed while developing code. Some rules are explained in the corresponding sections above. The remaining rules are explained here. - Explicitly mark inherited functions with the ``override`` specifier. - When creating STL smart pointers, prefer to use ``std::make_shared`` or ``std::make_unique``, instead of creating the smart pointer with ``new``. .. sourcecode:: cpp auto node = std::make_shared(); // OK auto node = std::shared_ptr(new Node()); // Avoid - When looping through containers, prefer to use range-based for loops rather than index-based loops. .. sourcecode:: cpp std::vector myVector{1, 2, 3}; for (const auto& v : myVector) { ... } // Prefer for (int i = 0; i < myVector.size(); i++) { ... } // Avoid - Avoid accessing class static functions and members through objects. Instead, prefer to access them through the class. .. sourcecode:: cpp // OK MyClass::StaticFunction(); // Avoid MyClass myClass; MyClass.StaticFunction(); - Prefer using type traits in short form ``traits_t<...>`` and ``traits_v<...>``, instead of the long form ``traits<...>::type`` and ``traits<...>::value``, respectively. .. sourcecode:: cpp // Prefer using the shorter version of type traits std::is_same_v std::is_integral_v std::enable_if_t, Time> // Avoid the longer form of type traits std::is_same::value std::is_integral::value std::enable_if::value, Time>::type - Avoid using integer values (``1`` or ``0``) to represent boolean variables (``true`` or ``false``), to improve code readability and avoid implicit conversions. - Prefer to use ``static_assert()`` over ``NS_ASSERT()`` when conditions can be evaluated at compile-time. - Prefer using transparent functors to non-transparent ones, to avoid repeating the type name. This improves readability and avoids errors when refactoring code. .. sourcecode:: cpp // Prefer using transparent functors std::map> myMap; // Avoid repeating the type name "MyClass" in std::less<> std::map> myMap; CMake file formatting ********************* The ``CMakeLists.txt`` and other ``*.cmake`` files follow the formatting rules defined in ``build-support/cmake-format.yaml`` and ``build-support/cmake-format-modules.yaml``. The first set of rules applies to CMake files in all directories that are not modules, while the second one applies to files within modules. .. _cmake-format: https://cmake-format.readthedocs.io/en/latest/cmake-format.html Those rules are enforced via the `cmake-format`_ tool, that can be installed via Pip. .. sourcecode:: console pip install cmake-format pyyaml After installing cmake-format, it can be called to fix the formatting of a CMake file with the following command: .. sourcecode:: console cmake-format -c ./build-support/cmake-format.yaml CMakeLists.txt To check the formatting, add the `--check` option to the command, before specifying the list of CMake files. Instead of calling this command for every single CMake file, it is recommended to use the ``ns3`` script to run the custom targets that do that automatically. .. sourcecode:: console # Check CMake formatting ./ns3 build cmake-format-check # Check and fix CMake formatting ./ns3 build cmake-format Custom functions and macros need to be explicitly configured in the ``cmake-format.yaml`` files, otherwise their formatting will be broken. Python file formatting ********************** .. _Black: https://black.readthedocs.io/en/stable/index.html .. _Isort: https://pycqa.github.io/isort/index.html .. _Black current style: https://black.readthedocs.io/en/stable/the_black_code_style/current_style.html Python format style and rule enforcement is based on the default settings for the `Black`_ formatter tool and `Isort`_ import sorter tool. Black default format is detailed in `Black current style`_. The custom settings for both tools are set in the ``pyproject.toml`` file. These tools that can be installed via Pip, using the following command: .. sourcecode:: console pip install black isort To check the formatting, add the `--check` option to the command: .. sourcecode:: console black --check . isort --check . To check and fix the formatting, run the commands as follows: .. sourcecode:: console black . isort . .. _MS Black formatter: https://marketplace.visualstudio.com/items?itemName=ms-python.black-formatter .. _MS Isort: https://marketplace.visualstudio.com/items?itemName=ms-python.isort For VS Code users, `MS Black formatter`_ and `MS Isort`_ extensions, which repackage Black and Isort for VS Code, can be installed to apply fixes regularly. To configure VS Code to automatically format code when saving, editing or pasting code, add the following configuration to ``.vscode/settings.json``: .. sourcecode:: json { "editor.formatOnPaste": true, "editor.formatOnSave": true, "editor.formatOnType": true, "[python]": { "editor.defaultFormatter": "ms-python.black-formatter", "editor.codeActionsOnSave": { "source.organizeImports": "explicit", }, }, "black-formatter.args": [ "--config", "pyproject.toml", ], "isort.check": true, "isort.args": [ "--sp", "pyproject.toml", ], }