Table Of Contents

Previous topic

How It Works

Next topic

About

This Page

Subprojects of DCE

Below are the list of the tested applications with DCE.

CCNx

CCNx is an open source implementation of Content Centric Networking. All the C written executables are supported and none of the Java ones. The versions tested are those between 0.4.0 and 0.6.1 included.

For more detail document, see CCNx examples.

Quagga

Quagga is a routing software suite, providing implementations of OSPFv2, OSPFv3, RIP v1 and v2, RIPng and BGP-4 for Unix platforms, particularly FreeBSD, Linux, Solaris and NetBSD. More information.

iperf

iperf from the following archive http://walami.googlecode.com/files/iperf-2.0.5.tar.gz as been tested. It is the exception that proves the rule. That is to say that this particular example requires a change in its code. In the source file named Thread.c at line 412 in the function named thread_rest you must add a sleep(1) in order to help DCE to break the infinite loop.

ping/ping6

Ping from the following archive http://www.skbuff.net/iputils/iputils-s20101006.tar.bz2 is supported.

umip (Mobilt IPv6 daemon)

The umip (Usagi-Patched Mobile IPv6 stack) support on DCE enables the users to reuse routing protocol implementations of Mobile IPv6. UMIP now supports Mobile IPv6 (RFC3775), Network Mobility (RFC3963), Proxy Mobile Ipv6 (RFC5213), etc, and can be used these protocols implementation as models of network simulation.

For more information, see the latest support document.

Linux kernel (from 2.6.36 to 3.14 version)

Linux kernel support is built with a separate ‘dce-linux’ module, available on github. Many protocols implemented in kernel space such as TCP, IPv4/IPv6, Mobile IPv6, Multipath-TCP, SCTP, DCCP, etc, are available with ns-3.

FreeBSD kernel (10.0.0 version)

FreeBSD kernel support is based on Linux kernel module of DCE. A few protocols implemented in kernel space such as TCP, IPv4, etc, are available with ns-3.

thttpd

(TBA)

torrent

(TBA)