.. include:: replace.txt .. _Mobility: Mobility -------- .. heading hierarchy: ------------- Chapter ************* Section (#.#) ============= Subsection (#.#.#) ############# Paragraph (no number) The mobility support in |ns3| includes: - a set of mobility models which are used to track and maintain the *current* cartesian position and speed of an object. - a "course change notifier" trace source which can be used to register listeners to the course changes of a mobility model - a number of helper classes which are used to place nodes and setup mobility models (including parsers for some mobility definition formats). Model Description ***************** The source code for mobility lives in the directory ``src/mobility``. Design ====== The design includes mobility models, position allocators, and helper functions. In |ns3|, special ``MobilityModel`` objects track the evolution of position with respect to a (cartesian) coordinate system. The mobility model is typically aggregated to an ``ns3::Node`` object and queried using ``GetObject ()``. The base class ``ns3::MobilityModel`` is subclassed for different motion behaviors. The initial position of objects is typically set with a PositionAllocator. These types of objects will lay out the position on a notional canvas. Once the simulation starts, the position allocator may no longer be used, or it may be used to pick future mobility "waypoints" for such mobility models. Most users interact with the mobility system using mobility helper classes. The MobilityHelper combines a mobility model and position allocator, and can be used with a node container to install mobility capability on a set of nodes. We first describe the coordinate system and issues surrounding multiple coordinate systems. Coordinate system ################# There are many possible coordinate systems and possible translations between them. |ns3| uses the Cartesian coordinate system only, at present. The question has arisen as to how to use the mobility models (supporting Cartesian coordinates) with different coordinate systems. This is possible if the user performs conversion between the |ns3| Cartesian and the other coordinate system. One possible library to assist is the proj4 http://trac.osgeo.org/proj/ library for projections and reverse projections. If we support converting between coordinate systems, we must adopt a reference. It has been suggested to use the geocentric Cartesian coordinate system as a reference. Contributions are welcome in this regard. The question has arisen about adding a new mobility model whose motion is natively implemented in a different coordinate system (such as an orbital mobility model implemented using spherical coordinate system). We advise to create a subclass with the APIs desired (such as Get/SetSphericalPosition), and new position allocators, and implement the motion however desired, but must also support the conversion to cartesian (by supporting the cartesian Get/SetPosition). Coordinates ########### The base class for a coordinate is called ``ns3::Vector``. While positions are normally described as coordinates and not vectors in the literature, it is possible to reuse the same data structure to represent position (x,y,z) and velocity (magnitude and direction from the current position). |ns3| uses class Vector for both. There are also some additional related structures used to support mobility models. - Rectangle - Box - Waypoint MobilityModel ############# Describe base class - GetPosition () - Position and Velocity attributes - GetDistanceFrom () - CourseChangeNotification MobilityModel Subclasses ######################## - ConstantPosition - ConstantVelocity - ConstantAcceleration - GaussMarkov - Hierarchical - RandomDirection2D - RandomWalk2D - RandomWaypoint - SteadyStateRandomWaypoint - Waypoint PositionAllocator ################# Position allocators usually used only at beginning, to lay out the nodes initial position. However, some mobility models (e.g. RandomWaypoint) will use a position allocator to pick new waypoints. - ListPositionAllocator - GridPositionAllocator - RandomRectanglePositionAllocator - RandomBoxPositionAllocator - RandomDiscPositionAllocator - UniformDiscPositionAllocator Helper ###### A special mobility helper is provided that is mainly aimed at supporting the installation of mobility to a Node container (when using containers at the helper API level). The MobilityHelper class encapsulates a MobilityModel factory object and a PositionAllocator used for initial node layout. ns-2 MobilityHelper ################### The |ns2| mobility format is a widely used mobility trace format. The documentation is available at: http://www.isi.edu/nsnam/ns/doc/node172.html Valid trace files use the following ns2 statements: .. sourcecode:: bash $node set X_ x1 $node set Y_ y1 $node set Z_ z1 $ns at $time $node setdest x2 y2 speed $ns at $time $node set X_ x1 $ns at $time $node set Y_ Y1 $ns at $time $node set Z_ Z1 In the above, the initial positions are set using the ``set`` statements. Also, this ``set`` can be specified for a future time, such as in the last three statements above. The command ``setdest`` instructs the simulation to start moving the specified node towards the coordinate (x2, y2) at the specified time. Note that the node may never get to the destination, but will proceed towards the destination at the specified speed until it either reaches the destination (where it will pause), is set to a new position (via ``set``), or sent on another course change (via ``setdest``). Note that in |ns3|, movement along the Z dimension is not supported. Some examples of external tools that can export in this format include: - `BonnMotion `_ - `Installation instructions `_ and - `Documentation `_ for using BonnMotion with |ns3| - `SUMO `_ - `TraNS `_ - |ns2| `setdest `_ utility A special Ns2MobilityHelper object can be used to parse these files and convert the statements into |ns3| mobility events. The underlying ConstantVelocityMobilityModel is used to model these movements. See below for additional usage instructions on this helper. Scope and Limitations ===================== - only cartesian coordinates are presently supported References ========== TBD Usage ***** Most |ns3| program authors typically interact with the mobility system only at configuration time. However, various |ns3| objects interact with mobility objects repeatedly during runtime, such as a propagation model trying to determine the path loss between two mobile nodes. Helper ====== A typical usage pattern can be found in the ``third.cc`` program in the tutorial. First, the user instantiates a ``MobilityHelper`` object and sets some ``Attributes`` controlling the "position allocator" functionality. .. sourcecode:: cpp MobilityHelper mobility; mobility.SetPositionAllocator ("ns3::GridPositionAllocator", "MinX", DoubleValue (0.0), "MinY", DoubleValue (0.0), "DeltaX", DoubleValue (5.0), "DeltaY", DoubleValue (10.0), "GridWidth", UintegerValue (3), "LayoutType", StringValue ("RowFirst")); This code tells the mobility helper to use a two-dimensional grid to initially place the nodes. The first argument is an |ns3| TypeId specifying the type of mobility model; the remaining attribute/value pairs configure this position allocator. Next, the user typically sets the MobilityModel subclass; e.g.: .. sourcecode:: cpp mobility.SetMobilityModel ("ns3::RandomWalk2dMobilityModel", "Bounds", RectangleValue (Rectangle (-50, 50, -50, 50))); Once the helper is configured, it is typically passed a container, such as: .. sourcecode:: cpp mobility.Install (wifiStaNodes); A MobilityHelper object may be reconfigured and reused for different NodeContainers during the configuration of an |ns3| scenario. Ns2MobilityHelper ================= Two example programs are provided demonstrating the use of the |ns2| mobility helper: - ns2-mobility-trace.cc - bonnmotion-ns2-example.cc ns2-mobility-trace ################## The ``ns2-mobility-trace.cc`` program is an example of loading an |ns2| trace file that specifies the movements of two nodes over 100 seconds of simulation time. It is paired with the file ``default.ns_movements``. The program behaves as follows: - a Ns2MobilityHelper object is created, with the specified trace file. - A log file is created, using the log file name argument. - A node container is created with the number of nodes specified in the command line. For this particular trace file, specify the value 2 for this argument. - the Install() method of Ns2MobilityHelper to set mobility to nodes. At this moment, the file is read line by line, and the movement is scheduled in the simulator. - A callback is configured, so each time a node changes its course a log message is printed. The example prints out messages generated by each read line from the ns2 movement trace file. For each line, it shows if the line is correct, or of it has errors and in this case it will be ignored. Example usage: .. sourcecode:: bash $ ./waf --run "ns2-mobility-trace \ --traceFile=src/mobility/examples/default.ns_movements \ --nodeNum=2 \ --duration=100.0 \ --logFile=ns2-mob.log" Sample log file output: .. sourcecode:: text +0.0ns POS: x=150, y=93.986, z=0; VEL:0, y=50.4038, z=0 +0.0ns POS: x=195.418, y=150, z=0; VEL:50.1186, y=0, z=0 +104727357.0ns POS: x=200.667, y=150, z=0; VEL:50.1239, y=0, z=0 +204480076.0ns POS: x=205.667, y=150, z=0; VEL:0, y=0, z=0 bonnmotion-ns2-example ###################### The ``bonnmotion-ns2-example.cc`` program, which models the movement of a single mobile node for 1000 seconds of simulation time, has a few associated files: - ``bonnmotion.ns_movements`` is the |ns2|-formatted mobility trace - ``bonnmotion.params`` is a BonnMotion-generated file with some metadata about the mobility trace - ``bonnmotion.ns_params`` is another BonnMotion-generated file with ns-2-related metadata. Neither of the latter two files is used by |ns3|, although they are generated as part of the BonnMotion process to output ns-2-compatible traces. The program ``bonnmotion-ns2-example.cc`` will output the following to stdout: .. sourcecode:: text At 0.00 node 0: Position(329.82, 66.06, 0.00); Speed(0.53, -0.22, 0.00) At 100.00 node 0: Position(378.38, 45.59, 0.00); Speed(0.00, 0.00, 0.00) At 200.00 node 0: Position(304.52, 123.66, 0.00); Speed(-0.92, 0.97, 0.00) At 300.00 node 0: Position(274.16, 131.67, 0.00); Speed(-0.53, -0.46, 0.00) At 400.00 node 0: Position(202.11, 123.60, 0.00); Speed(-0.98, 0.35, 0.00) At 500.00 node 0: Position(104.60, 158.95, 0.00); Speed(-0.98, 0.35, 0.00) At 600.00 node 0: Position(31.92, 183.87, 0.00); Speed(0.76, -0.51, 0.00) At 700.00 node 0: Position(107.99, 132.43, 0.00); Speed(0.76, -0.51, 0.00) At 800.00 node 0: Position(184.06, 80.98, 0.00); Speed(0.76, -0.51, 0.00) At 900.00 node 0: Position(250.08, 41.76, 0.00); Speed(0.60, -0.05, 0.00) The motion of the mobile node is sampled every 100 seconds, and its position and speed are printed out. This output may be compared to the output of a similar |ns2| program (found in the |ns2| ``tcl/ex/`` directory of |ns2|) running from the same mobility trace. The next file is generated from |ns2| (users will have to download and install |ns2| and run this Tcl program to see this output). The output of the |ns2| ``bonnmotion-example.tcl`` program is shown below for comparison (file ``bonnmotion-example.tr``): .. sourcecode:: text M 0.00000 0 (329.82, 66.06, 0.00), (378.38, 45.59), 0.57 M 100.00000 0 (378.38, 45.59, 0.00), (378.38, 45.59), 0.57 M 119.37150 0 (378.38, 45.59, 0.00), (286.69, 142.52), 1.33 M 200.00000 0 (304.52, 123.66, 0.00), (286.69, 142.52), 1.33 M 276.35353 0 (286.69, 142.52, 0.00), (246.32, 107.57), 0.70 M 300.00000 0 (274.16, 131.67, 0.00), (246.32, 107.57), 0.70 M 354.65589 0 (246.32, 107.57, 0.00), (27.38, 186.94), 1.04 M 400.00000 0 (202.11, 123.60, 0.00), (27.38, 186.94), 1.04 M 500.00000 0 (104.60, 158.95, 0.00), (27.38, 186.94), 1.04 M 594.03719 0 (27.38, 186.94, 0.00), (241.02, 42.45), 0.92 M 600.00000 0 (31.92, 183.87, 0.00), (241.02, 42.45), 0.92 M 700.00000 0 (107.99, 132.43, 0.00), (241.02, 42.45), 0.92 M 800.00000 0 (184.06, 80.98, 0.00), (241.02, 42.45), 0.92 M 884.77399 0 (241.02, 42.45, 0.00), (309.59, 37.22), 0.60 M 900.00000 0 (250.08, 41.76, 0.00), (309.59, 37.22), 0.60 The output formatting is slightly different, and the course change times are additionally plotted, but it can be seen that the position vectors are the same between the two traces at intervals of 100 seconds. The mobility computations performed on the |ns2| trace file are slightly different in |ns2| and |ns3|, and floating-point arithmetic is used, so there is a chance that the position in |ns2| may be slightly different than the respective position when using the trace file in |ns3|. Use of Random Variables ======================= A typical use case is to evaluate protocols on a mobile topology that involves some randomness in the motion or initial position allocation. To obtain random motion and positioning that is not affected by the configuration of the rest of the scenario, it is recommended to use the "AssignStreams" facility of the random number system. Class ``MobilityModel`` and class ``PositionAllocator`` both have public API to assign streams to underlying random variables: .. sourcecode:: cpp /** * Assign a fixed random variable stream number to the random variables * used by this model. Return the number of streams (possibly zero) that * have been assigned. * * \param stream first stream index to use * \return the number of stream indices assigned by this model */ int64_t AssignStreams (int64_t stream); The class ``MobilityHelper`` also provides this API. The typical usage pattern when using the helper is: .. sourcecode:: cpp int64_t streamIndex = /*some positive integer */ MobilityHelper mobility; ... (configure mobility) mobility.Install (wifiStaNodes); int64_t streamsUsed = mobility.AssignStreams (wifiStaNodes, streamIndex); If AssignStreams is called before Install, it will not have any effect. Advanced Usage ============== A number of external tools can be used to generate traces read by the Ns2MobilityHelper. ns-2 scengen ############ TBD BonnMotion ########## http://net.cs.uni-bonn.de/wg/cs/applications/bonnmotion/ SUMO #### http://sourceforge.net/apps/mediawiki/sumo/index.php?title=Main_Page TraNS ##### http://trans.epfl.ch/ Examples ======== - main-random-topology.cc - main-random-walk.cc - main-grid-topology.cc - ns2-mobility-trace.cc - ns2-bonnmotion.cc Validation ********** TBD