csma-one-subnet.cc

Go to the documentation of this file.

/* -*- Mode:C++; c-file-style:"gnu"; indent-tabs-mode:nil; -*- */
/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation;
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

// Network topology
//
//       n0    n1   n2   n3
//       |     |    |    |
//       =================
//              LAN
//
// - CBR/UDP flows from n0 to n1 and from n3 to n0
// - DropTail queues 
// - Tracing of queues and packet receptions to file "csma-one-subnet.tr"

#include <iostream>
#include <fstream>

#include "ns3/core-module.h"
#include "ns3/network-module.h"
#include "ns3/csma-module.h"
#include "ns3/applications-module.h"
#include "ns3/internet-module.h"

using namespace ns3;

NS_LOG_COMPONENT_DEFINE ("CsmaOneSubnetExample");

int 
main (int argc, char *argv[])
{
//
// Users may find it convenient to turn on explicit debugging
// for selected modules; the below lines suggest how to do this
//
#if 0 
  LogComponentEnable ("CsmaOneSubnetExample", LOG_LEVEL_INFO);
#endif
//
// Allow the user to override any of the defaults and the above Bind() at
// run-time, via command-line arguments
//
  CommandLine cmd;
  cmd.Parse (argc, argv);
//
// Explicitly create the nodes required by the topology (shown above).
//
  NS_LOG_INFO ("Create nodes.");
  NodeContainer nodes;
  nodes.Create (4);

  NS_LOG_INFO ("Build Topology");
  CsmaHelper csma;
  csma.SetChannelAttribute ("DataRate", DataRateValue (5000000));
  csma.SetChannelAttribute ("Delay", TimeValue (MilliSeconds (2)));
//
// Now fill out the topology by creating the net devices required to connect
// the nodes to the channels and hooking them up.
//
  NetDeviceContainer devices = csma.Install (nodes);

  InternetStackHelper internet;
  internet.Install (nodes);

// We've got the "hardware" in place.  Now we need to add IP addresses.
//
  NS_LOG_INFO ("Assign IP Addresses.");
  Ipv4AddressHelper ipv4;
  ipv4.SetBase ("10.1.1.0", "255.255.255.0");
  Ipv4InterfaceContainer interfaces = ipv4.Assign (devices);

//
// Create an OnOff application to send UDP datagrams from node zero to node 1.
//
  NS_LOG_INFO ("Create Applications.");
  uint16_t port = 9;   // Discard port (RFC 863)

  OnOffHelper onoff ("ns3::UdpSocketFactory", 
                     Address (InetSocketAddress (interfaces.GetAddress (1), port)));
  onoff.SetConstantRate (DataRate ("500kb/s"));

  ApplicationContainer app = onoff.Install (nodes.Get (0));
  // Start the application
  app.Start (Seconds (1.0));
  app.Stop (Seconds (10.0));

  // Create an optional packet sink to receive these packets
  PacketSinkHelper sink ("ns3::UdpSocketFactory",
                         Address (InetSocketAddress (Ipv4Address::GetAny (), port)));
  app = sink.Install (nodes.Get (1));
  app.Start (Seconds (0.0));

// 
// Create a similar flow from n3 to n0, starting at time 1.1 seconds
//
  onoff.SetAttribute ("Remote", 
                      AddressValue (InetSocketAddress (interfaces.GetAddress (0), port)));
  app = onoff.Install (nodes.Get (3));
  app.Start (Seconds (1.1));
  app.Stop (Seconds (10.0));

  app = sink.Install (nodes.Get (0));
  app.Start (Seconds (0.0));

  NS_LOG_INFO ("Configure Tracing.");
//
// Configure ascii tracing of all enqueue, dequeue, and NetDevice receive 
// events on all devices.  Trace output will be sent to the file 
// "csma-one-subnet.tr"
//
  AsciiTraceHelper ascii;
  csma.EnableAsciiAll (ascii.CreateFileStream ("csma-one-subnet.tr"));

//
// Also configure some tcpdump traces; each interface will be traced.
// The output files will be named:
//
//     csma-one-subnet-<node ID>-<device's interface index>.pcap
//
// and can be read by the "tcpdump -r" command (use "-tt" option to
// display timestamps correctly)
//
  csma.EnablePcapAll ("csma-one-subnet", false);
//
// Now, do the actual simulation.
//
  NS_LOG_INFO ("Run Simulation.");
  Simulator::Run ();
  Simulator::Destroy ();
  NS_LOG_INFO ("Done.");
}