32 #include "ns3/core-module.h" 
   33 #include "ns3/network-module.h" 
   34 #include "ns3/applications-module.h" 
   35 #include "ns3/mobility-module.h" 
   36 #include "ns3/config-store-module.h" 
   37 #include "ns3/wifi-module.h" 
   38 #include "ns3/internet-module.h" 
   39 #include "ns3/dsr-module.h" 
   47 main (
int argc, 
char *argv[])
 
   81   double TotalTime = 600.0;
 
   82   double dataTime = 500.0;
 
   85   double dataStart = 100.0; 
 
   88   double pauseTime = 0.0;
 
   89   double nodeSpeed = 20.0;
 
   90   double txpDistance = 250.0;
 
   92   std::string rate = 
"0.512kbps";
 
   93   std::string dataMode (
"DsssRate11Mbps");
 
   94   std::string phyMode (
"DsssRate11Mbps");
 
   98   cmd.
AddValue (
"nWifis", 
"Number of wifi nodes", nWifis);
 
   99   cmd.
AddValue (
"nSinks", 
"Number of SINK traffic nodes", nSinks);
 
  100   cmd.
AddValue (
"rate", 
"CBR traffic rate(in kbps), Default:8", rate);
 
  101   cmd.
AddValue (
"nodeSpeed", 
"Node speed in RandomWayPoint model, Default:20", nodeSpeed);
 
  102   cmd.
AddValue (
"packetSize", 
"The packet size", packetSize);
 
  103   cmd.
AddValue (
"txpDistance", 
"Specify node's transmit range, Default:300", txpDistance);
 
  104   cmd.
AddValue (
"pauseTime", 
"pauseTime for mobility model, Default: 0", pauseTime);
 
  105   cmd.
Parse (argc, argv);
 
  111   adhocNodes.
Create (nWifis);
 
  114   NS_LOG_INFO (
"setting the default phy and channel parameters");
 
  120   NS_LOG_INFO (
"setting the default phy and channel parameters ");
 
  135   wifiMac.
SetType (
"ns3::AdhocWifiMac");
 
  136   allDevices = wifi.
Install (wifiPhy, wifiMac, adhocNodes);
 
  146   pos.
SetTypeId (
"ns3::RandomRectanglePositionAllocator");
 
  147   pos.
Set (
"X", 
StringValue (
"ns3::UniformRandomVariable[Min=0.0|Max=300.0]"));
 
  148   pos.
Set (
"Y", 
StringValue (
"ns3::UniformRandomVariable[Min=0.0|Max=1500.0]"));
 
  151   std::ostringstream speedUniformRandomVariableStream;
 
  152   speedUniformRandomVariableStream << 
"ns3::UniformRandomVariable[Min=0.0|Max=" 
  156   std::ostringstream pauseConstantRandomVariableStream;
 
  157   pauseConstantRandomVariableStream << 
"ns3::ConstantRandomVariable[Constant=" 
  163                                   "Speed", 
StringValue (speedUniformRandomVariableStream.str ()),
 
  164                                   "Pause", 
StringValue (pauseConstantRandomVariableStream.str ()),
 
  167   adhocMobility.
Install (adhocNodes);
 
  173   dsrMain.
Install (dsr, adhocNodes);
 
  177   address.
SetBase (
"10.1.1.0", 
"255.255.255.0");
 
  179   allInterfaces = address.
Assign (allDevices);
 
  182   double randomStartTime = (1 / ppers) / nSinks; 
 
  184   for (uint32_t i = 0; i < nSinks; ++i)
 
  193       onoff1.SetAttribute (
"OffTime", 
StringValue (
"ns3::ConstantRandomVariable[Constant=0.0]"));
 
  194       onoff1.SetAttribute (
"PacketSize", 
UintegerValue (packetSize));
 
  198       apps1.
Start (
Seconds (dataStart + i * randomStartTime));
 
  199       apps1.
Stop (
Seconds (dataTime + i * randomStartTime));
 
void AddPropagationLoss(std::string name, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
holds a vector of ns3::Application pointers. 
Manage ASCII trace files for device models. 
static Ipv4Address GetAny(void)
holds a vector of std::pair of Ptr and interface index. 
Ptr< YansWifiChannel > Create(void) const 
void SetRemoteStationManager(std::string type, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
Ptr< T > GetObject(void) const 
Get a pointer to the requested aggregated Object. 
Hold variables of type string. 
Make it easy to create and manage PHY objects for the yans model. 
virtual void SetType(std::string type, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
Helper class that adds DSR routing to nodes. 
static void Run(void)
Run the simulation. 
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name. 
void SetTypeId(TypeId tid)
Set the TypeId of the Objects to be created by this factory. 
aggregate IP/TCP/UDP functionality to existing Nodes. 
#define NS_LOG_INFO(msg)
Use NS_LOG to output a message of level LOG_INFO. 
A helper to make it easier to instantiate an ns3::PacketSinkApplication on a set of nodes...
Ptr< OutputStreamWrapper > CreateFileStream(std::string filename, std::ios::openmode filemode=std::ios::out)
Create and initialize an output stream object we'll use to write the traced bits. ...
static YansWifiPhyHelper Default(void)
Create a phy helper in a default working state. 
helps to create WifiNetDevice objects 
A helper to make it easier to instantiate an ns3::OnOffApplication on a set of nodes. 
static void SetRun(uint64_t run)
Set the run number of simulation. 
virtual NetDeviceContainer Install(const WifiPhyHelper &phy, const WifiMacHelper &mac, NodeContainer c) const 
a polymophic address class 
Class for representing data rates. 
void SetChannel(Ptr< YansWifiChannel > channel)
void Install(Ptr< Node > node) const 
"Layout" a single node according to the current position allocator type. 
void LogComponentEnable(char const *name, enum LogLevel level)
Enable the logging output associated with that log component. 
Ptr< Object > Create(void) const 
Create an Object instance of the configured TypeId. 
Hold an unsigned integer type. 
holds a vector of ns3::NetDevice pointers 
virtual void SetStandard(enum WifiPhyStandard standard)
static NqosWifiMacHelper Default(void)
Create a mac helper in a default working state. 
void Start(Time start)
Arrange for all of the Applications in this container to Start() at the Time given as a parameter...
create non QoS-enabled MAC layers for a ns3::WifiNetDevice. 
Parse command-line arguments. 
static void Destroy(void)
Execute the events scheduled with ScheduleDestroy(). 
Every class exported by the ns3 library is enclosed in the ns3 namespace. 
keep track of a set of node pointers. 
Hold objects of type Ptr. 
DSSS PHY (Clause 15) and HR/DSSS PHY (Clause 18) 
void SetMobilityModel(std::string type, std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue(), std::string n8="", const AttributeValue &v8=EmptyAttributeValue(), std::string n9="", const AttributeValue &v9=EmptyAttributeValue())
void Install(std::string nodeName) const 
Aggregate implementations of the ns3::Ipv4, ns3::Ipv6, ns3::Udp, and ns3::Tcp classes onto the provid...
void Set(std::string name, const AttributeValue &value)
Set an attribute to be set during construction. 
manage and create wifi channel objects for the yans model. 
static void SetSeed(uint32_t seed)
Set the seed. 
Helper class used to assign positions and mobility models to nodes. 
Instantiate subclasses of ns3::Object. 
void Stop(Time stop)
Arrange for all of the Applications in this container to Stop() at the Time given as a parameter...
Ipv4InterfaceContainer Assign(const NetDeviceContainer &c)
Assign IP addresses to the net devices specified in the container based on the current network prefix...
AttributeValue implementation for DataRate. 
void AddValue(const std::string &name, const std::string &help, T &value)
Add a program argument, assigning to POD. 
static void Stop(void)
Tell the Simulator the calling event should be the last one executed. 
Ptr< Node > Get(uint32_t i) const 
Get the Ptr stored in this container at a given index. 
Time Seconds(double value)
Construct a Time in the indicated unit. 
void SetDefault(std::string name, const AttributeValue &value)
void Parse(int argc, char *argv[])
Parse the program arguments. 
A helper class to make life easier while doing simple IPv4 address assignment in scripts. 
void EnableAsciiAll(std::string prefix)
Enable ascii trace output on each device (which is of the appropriate type) in the set of all nodes c...
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer. 
static const uint32_t packetSize
void SetPropagationDelay(std::string name, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
This class can be used to hold variables of floating point type such as 'double' or 'float'...
void Install(DsrHelper &dsrHelper, NodeContainer nodes)
void SetAttribute(std::string name, const AttributeValue &value)
Helper function used to set the underlying application attributes. 
void SetBase(Ipv4Address network, Ipv4Mask mask, Ipv4Address base="0.0.0.1")
Set the base network number, network mask and base address. 
Ipv4Address GetAddress(uint32_t i, uint32_t j=0) const 
Allocate a set of positions.