.. include:: replace.txt .. highlight:: python Using Python to Run |ns3| ------------------------- Python bindings allow the C++ code in |ns3| to be called from Python. This chapter shows you how to create a Python script that can run |ns3| and also the process of creating Python bindings for a C++ |ns3| module. Introduction ************ Python bindings provide support for importing |ns3| model libraries as Python modules. Coverage of most of the |ns3| C++ API is provided. The intent has been to allow the programmer to write complete simulation scripts in Python, to allow integration of |ns3| with other Python tools and workflows. The intent is not to provide a different language choice to author new |ns3| models implemented in Python. Python bindings for |ns3| use a tool called PyBindGen (https://github.com/gjcarneiro/pybindgen) to create Python modules from the C++ libraries built by Waf. The Python bindings that PyBindGen uses are maintained in a ``bindings`` directory in each module, and must be maintained to match the C++ API of that ns-3 module. If the C++ API changes, the Python bindings file must either be modified by hand accordingly, or the bindings must be regenerated by an automated scanning process. If a user is not interested in Python, he or she may disable the use of Python bindings at Waf configure time. In this case, changes to the C++ API of a provided module will not cause the module to fail to compile. The process for automatically generating Python bindings relies on a toolchain involving a development installation of the Clang compiler, a program called CastXML (https://github.com/CastXML/CastXML), and a program called pygccxml (https://github.com/gccxml/pygccxml). The toolchain can be installed using the ns-3 ``bake`` build tool. An Example Python Script that Runs |ns3| **************************************** Here is some example code that is written in Python and that runs |ns3|, which is written in C++. This Python example can be found in ``examples/tutorial/first.py``: :: import ns.applications import ns.core import ns.internet import ns.network import ns.point_to_point ns.core.LogComponentEnable("UdpEchoClientApplication", ns.core.LOG_LEVEL_INFO) ns.core.LogComponentEnable("UdpEchoServerApplication", ns.core.LOG_LEVEL_INFO) nodes = ns.network.NodeContainer() nodes.Create(2) pointToPoint = ns.point_to_point.PointToPointHelper() pointToPoint.SetDeviceAttribute("DataRate", ns.core.StringValue("5Mbps")) pointToPoint.SetChannelAttribute("Delay", ns.core.StringValue("2ms")) devices = pointToPoint.Install(nodes) stack = ns.internet.InternetStackHelper() stack.Install(nodes) address = ns.internet.Ipv4AddressHelper() address.SetBase(ns.network.Ipv4Address("10.1.1.0"), ns.network.Ipv4Mask("255.255.255.0")) interfaces = address.Assign (devices); echoServer = ns.applications.UdpEchoServerHelper(9) serverApps = echoServer.Install(nodes.Get(1)) serverApps.Start(ns.core.Seconds(1.0)) serverApps.Stop(ns.core.Seconds(10.0)) echoClient = ns.applications.UdpEchoClientHelper(interfaces.GetAddress(1), 9) echoClient.SetAttribute("MaxPackets", ns.core.UintegerValue(1)) echoClient.SetAttribute("Interval", ns.core.TimeValue(ns.core.Seconds (1.0))) echoClient.SetAttribute("PacketSize", ns.core.UintegerValue(1024)) clientApps = echoClient.Install(nodes.Get(0)) clientApps.Start(ns.core.Seconds(2.0)) clientApps.Stop(ns.core.Seconds(10.0)) ns.core.Simulator.Run() ns.core.Simulator.Destroy() Running Python Scripts ********************** waf contains some options that automatically update the python path to find the ns3 module. To run example programs, there are two ways to use waf to take care of this. One is to run a waf shell; e.g.: .. sourcecode:: bash $ ./waf shell $ python examples/wireless/mixed-wireless.py and the other is to use the --pyrun option to waf: .. sourcecode:: bash $ ./waf --pyrun examples/wireless/mixed-wireless.py To run a python script under the C debugger: .. sourcecode:: bash $ ./waf shell $ gdb --args python examples/wireless/mixed-wireless.py To run your own Python script that calls |ns3| and that has this path, ``/path/to/your/example/my-script.py``, do the following: .. sourcecode:: bash $ ./waf shell $ python /path/to/your/example/my-script.py Caveats ******* Python bindings for |ns3| are a work in progress, and some limitations are known by developers. Some of these limitations (not all) are listed here. Incomplete Coverage +++++++++++++++++++ First of all, keep in mind that not 100% of the API is supported in Python. Some of the reasons are: #. some of the APIs involve pointers, which require knowledge of what kind of memory passing semantics (who owns what memory). Such knowledge is not part of the function signatures, and is either documented or sometimes not even documented. Annotations are needed to bind those functions; #. Sometimes a unusual fundamental data type or C++ construct is used which is not yet supported by PyBindGen; #. GCC-XML does not report template based classes unless they are instantiated. (Note: Need to confirm this limitation still exists with CastXML) Most of the missing APIs can be wrapped, given enough time, patience, and expertise, and will likely be wrapped if bug reports are submitted. However, don't file a bug report saying "bindings are incomplete", because we do not have manpower to complete 100% of the bindings. Conversion Constructors +++++++++++++++++++++++ `Conversion constructors `_ are not fully supported yet by PyBindGen, and they always act as explicit constructors when translating an API into Python. For example, in C++ you can do this: .. sourcecode:: cpp Ipv4AddressHelper ipAddrs; ipAddrs.SetBase ("192.168.0.0", "255.255.255.0"); ipAddrs.Assign (backboneDevices); In Python, for the time being you have to do: :: ipAddrs = ns.internet.Ipv4AddressHelper() ipAddrs.SetBase(ns.network.Ipv4Address("192.168.0.0"), ns.network.Ipv4Mask("255.255.255.0")) ipAddrs.Assign(backboneDevices) CommandLine +++++++++++ :cpp:func:`CommandLine::AddValue` works differently in Python than it does in |ns3|. In Python, the first parameter is a string that represents the command-line option name. When the option is set, an attribute with the same name as the option name is set on the :cpp:func:`CommandLine` object. Example: :: NUM_NODES_SIDE_DEFAULT = 3 cmd = ns3.CommandLine() cmd.NumNodesSide = None cmd.AddValue("NumNodesSide", "Grid side number of nodes (total number of nodes will be this number squared)") cmd.Parse(argv) [...] if cmd.NumNodesSide is None: num_nodes_side = NUM_NODES_SIDE_DEFAULT else: num_nodes_side = int(cmd.NumNodesSide) Tracing +++++++ Callback based tracing is not yet properly supported for Python, as new |ns3| API needs to be provided for this to be supported. Pcap file writing is supported via the normal API. ASCII tracing is supported since |ns3|.4 via the normal C++ API translated to Python. However, ASCII tracing requires the creation of an ostream object to pass into the ASCII tracing methods. In Python, the C++ std::ofstream has been minimally wrapped to allow this. For example: :: ascii = ns3.ofstream("wifi-ap.tr") # create the file ns3.YansWifiPhyHelper.EnableAsciiAll(ascii) ns3.Simulator.Run() ns3.Simulator.Destroy() ascii.close() # close the file There is one caveat: you must not allow the file object to be garbage collected while |ns3| is still using it. That means that the 'ascii' variable above must not be allowed to go out of scope or else the program will crash. Working with Python Bindings **************************** Python bindings are built on a module-by-module basis, and can be found in each module's ``bindings`` directory. Python Bindings Workflow ++++++++++++++++++++++++ The process by which Python bindings are handled is the following: #. Periodically a developer uses a CastXML (https://github.com/CastXML/CastXML) based API scanning script, which saves the scanned API definition as ``bindings/python/ns3_module_*.py`` files or as Python files in each modules' ``bindings`` directory. These files are kept under version control in the main |ns3| repository; #. Other developers clone the repository and use the already scanned API definitions; #. When configuring |ns3|, pybindgen will be automatically downloaded if not already installed. Released |ns3| tarballs will ship a copy of pybindgen. If something goes wrong with compiling Python bindings and you just want to ignore them and move on with C++, you can disable Python with: .. sourcecode:: bash $ ./waf --disable-python Instructions for Handling New Files or Changed API's **************************************************** So you have been changing existing |ns3| APIs and Python bindings no longer compile? Do not despair, you can rescan the bindings to create new bindings that reflect the changes to the |ns3| API. Overview ++++++++ The python bindings are generated into an 'ns' namespace. Examples: :: from ns.network import Node n1 = Node() or :: import ns.network n1 = ns.network.Node() The best way to explore the bindings is to look at the various example programs provided in |ns3|; some C++ examples have a corresponding Python example. There is no structured documentation for the Python bindings like there is Doxygen for the C++ API, but the Doxygen can be consulted to understand how the C++ API works. Scanning the Modular Python Bindings ++++++++++++++++++++++++++++++++++++ Scanning of the C++ API is only necessary if a user is using Python and is changing the C++ API to introduce new methods (that he or she wishes to be accessible from Python) or is changing the C++ API in a way that breaks the compilation of the existing Python bindings. There are two steps. First, the bindings toolchain must be enabled in the |ns3| build. This requires that the castxml and pygccxml tools be installed on the system or using the bake build tool. Second, Waf can be used to update the bindings. The output of './waf configure' can be inspected to see if Python API scanning support is enabled: :: Python API Scanning Support : enabled It may say something like this, if the support is not active: :: Python API Scanning Support : not enabled (Missing 'pygccxml' Python module) In this case, the user must take steps to install castxml and pygccxml; castxml binary must be in the shell's path, and pygccxml must be in the Python path. An automated setup for this is provided by the `bake` build system, if the user selects the 'ns-allinone-3.nn' configuration target (where 'nn' is the release number. For example: :: ./bake.py configure -e ns-allinone-3.27 ./bake.py download ./bake.py build Once API scanning support is enabled, to scan the modular Python bindings for the core module, for example, do the following: .. sourcecode:: bash $ ./waf --apiscan=core --no32bit-scan To scan the modular Python bindings for all of the modules, do the following: .. sourcecode:: bash $ ./waf --apiscan=all --no32bit-scan The ``--no32bit-scan`` flag is described below. Adding Modular Bindings To A Existing or New Module +++++++++++++++++++++++++++++++++++++++++++++++++++ To add support for modular bindings to an existing or new |ns3| module, simply add the following line to its wscript build() function: :: bld.ns3_python_bindings() One must also provide the bindings files (usually by running the scanning framework). Differences between MacOS and Linux bindings ++++++++++++++++++++++++++++++++++++++++++++ Linux (64-bit, as most modern installations use) and MacOS use different data models, as explained here: https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.3.0/com.ibm.zos.v2r3.cbcpx01/datatypesize64.htm Linux uses the LP64 model, and MacOS (as well as 32-bit Linux) use the ILP32 model. Users will note that there are two versions of bindings files in each ns-3 module directory; one with an ILP32.py suffix and one with an LP64.py suffix. Only one is used on any given platform. The main difference is in the representation of the 64 bit integer type as either a 'long' (LP64) or 'long long' (ILP32). As of ns-3.27, the CastXML framework can generate LP64 bindings by passing the ``--no32bit-scan`` flag. However, the framework does not automatically generate 32bit scans at the moment. Instead, users must manually generate the ILP32.py equivalents by taking all instances of 'unsigned long' in the bindings file and converting them to 'unsigned long long', such as: :: - cls.add_instance_attribute('nMarkedBytes', 'std::map< std::string, unsigned long >', is_const=False) + cls.add_instance_attribute('nMarkedBytes', 'std::map< std::string, unsigned long long >', is_const=False) In summary, to generate LP64 bindings for Linux 64-bit systems, it is sufficient to call: :: $ ./waf --apiscan=core --no32bit-scan To generate ILP32 bindings, one first must generate the LP64.py file as above, and then copy the file to be named with an ILP32.py suffix, and then hand-edit that file, replacing all instances of 'unsigned long' with 'unsigned long long'. |ns3| maintainers are working to better automate this process for future releases. Organization of the Modular Python Bindings +++++++++++++++++++++++++++++++++++++++++++ The ``src//bindings`` directory may contain the following files, some of them optional: * ``callbacks_list.py``: this is a scanned file, DO NOT TOUCH. Contains a list of Callback<...> template instances found in the scanned headers; * ``modulegen__gcc_LP64.py``: this is a scanned file, DO NOT TOUCH. Scanned API definitions for the GCC, LP64 architecture (64-bit) * ``modulegen__gcc_ILP32.py``: this is a scanned file, DO NOT TOUCH. Scanned API definitions for the GCC, ILP32 architecture (32-bit) * ``modulegen_customizations.py``: you may optionally add this file in order to customize the pybindgen code generation * ``scan-header.h``: you may optionally add this file to customize what header file is scanned for the module. Basically this file is scanned instead of ns3/-module.h. Typically, the first statement is #include "ns3/-module.h", plus some other stuff to force template instantiations; * ``module_helpers.cc``: you may add additional files, such as this, to be linked to python extension module, but they have to be registered in the wscript. Look at src/core/wscript for an example of how to do so; * ``.py``: if this file exists, it becomes the "frontend" python module for the ns3 module, and the extension module (.so file) becomes _.so instead of .so. The .py file has to import all symbols from the module _ (this is more tricky than it sounds, see src/core/bindings/core.py for an example), and then can add some additional pure-python definitions. More Information for Developers ******************************* If you are a developer and need more information on |ns3|'s Python bindings, please see the `Python Bindings wiki page `_.