csma-one-subnet.cc

Go to the documentation of this file.

/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation;
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 
// Network topology
//
//       n0    n1   n2   n3
//       |     |    |    |
//       =================
//              LAN
//
// - CBR/UDP flows from n0 to n1 and from n3 to n0
// - DropTail queues
// - Tracing of queues and packet receptions to file "csma-one-subnet.tr"
 
#include "ns3/applications-module.h"
#include "ns3/core-module.h"
#include "ns3/csma-module.h"
#include "ns3/internet-module.h"
#include "ns3/network-module.h"
 
#include <fstream>
#include <iostream>
 
using namespace ns3;
 
NS_LOG_COMPONENT_DEFINE("CsmaOneSubnetExample");
 
int
main(int argc, char* argv[])
{
//
// Users may find it convenient to turn on explicit debugging
// for selected modules; the below lines suggest how to do this
//
#if 0
  LogComponentEnable ("CsmaOneSubnetExample", LOG_LEVEL_INFO);
#endif
    //
    // Allow the user to override any of the defaults and the above Bind() at
    // run-time, via command-line arguments
    //
    CommandLine cmd(__FILE__);
    cmd.Parse(argc, argv);
    //
    // Explicitly create the nodes required by the topology (shown above).
    //
    NS_LOG_INFO("Create nodes.");
    NodeContainer nodes;
    nodes.Create(4);
 
    NS_LOG_INFO("Build Topology");
    CsmaHelper csma;
    csma.SetChannelAttribute("DataRate", DataRateValue(5000000));
    csma.SetChannelAttribute("Delay", TimeValue(MilliSeconds(2)));
    //
    // Now fill out the topology by creating the net devices required to connect
    // the nodes to the channels and hooking them up.
    //
    NetDeviceContainer devices = csma.Install(nodes);
 
    InternetStackHelper internet;
    internet.Install(nodes);
 
    // We've got the "hardware" in place.  Now we need to add IP addresses.
    //
    NS_LOG_INFO("Assign IP Addresses.");
    Ipv4AddressHelper ipv4;
    ipv4.SetBase("10.1.1.0", "255.255.255.0");
    Ipv4InterfaceContainer interfaces = ipv4.Assign(devices);
 
    //
    // Create an OnOff application to send UDP datagrams from node zero to node 1.
    //
    NS_LOG_INFO("Create Applications.");
    uint16_t port = 9; // Discard port (RFC 863)
 
    OnOffHelper onoff("ns3::UdpSocketFactory",
                      Address(InetSocketAddress(interfaces.GetAddress(1), port)));
    onoff.SetConstantRate(DataRate("500kb/s"));
 
    ApplicationContainer app = onoff.Install(nodes.Get(0));
    // Start the application
    app.Start(Seconds(1.0));
    app.Stop(Seconds(10.0));
 
    // Create an optional packet sink to receive these packets
    PacketSinkHelper sink("ns3::UdpSocketFactory",
                          Address(InetSocketAddress(Ipv4Address::GetAny(), port)));
    app = sink.Install(nodes.Get(1));
    app.Start(Seconds(0.0));
 
    //
    // Create a similar flow from n3 to n0, starting at time 1.1 seconds
    //
    onoff.SetAttribute("Remote", AddressValue(InetSocketAddress(interfaces.GetAddress(0), port)));
    app = onoff.Install(nodes.Get(3));
    app.Start(Seconds(1.1));
    app.Stop(Seconds(10.0));
 
    app = sink.Install(nodes.Get(0));
    app.Start(Seconds(0.0));
 
    NS_LOG_INFO("Configure Tracing.");
    //
    // Configure ascii tracing of all enqueue, dequeue, and NetDevice receive
    // events on all devices.  Trace output will be sent to the file
    // "csma-one-subnet.tr"
    //
    AsciiTraceHelper ascii;
    csma.EnableAsciiAll(ascii.CreateFileStream("csma-one-subnet.tr"));
 
    //
    // Also configure some tcpdump traces; each interface will be traced.
    // The output files will be named:
    //
    //     csma-one-subnet-<node ID>-<device's interface index>.pcap
    //
    // and can be read by the "tcpdump -r" command (use "-tt" option to
    // display timestamps correctly)
    //
    csma.EnablePcapAll("csma-one-subnet", false);
    //
    // Now, do the actual simulation.
    //
    NS_LOG_INFO("Run Simulation.");
    Simulator::Run();
    Simulator::Destroy();
    NS_LOG_INFO("Done.");
}