17.4 Using the CsmaNetDevice

The CSMA net devices and channels are typically created and configured using the associated CsmaHelper object. The various ns3 device helpers generally work in a similar way, and their use is seen in many of our example programs.

The conceptual model of interest is that of a bare computer “husk” into which you plug net devices. The bare computers are created using a NodeContainer helper. You just ask this helper to create as many computers (we call them Nodes) as you need on your network:

  NodeContainer csmaNodes;
  csmaNodes.Create (nCsmaNodes);

Once you have your nodes, you need to instantiate a CsmaHelper and set any attributes you may want to change.

  CsmaHelper csma;
  csma.SetChannelAttribute ("DataRate", StringValue ("100Mbps"));
  csma.SetChannelAttribute ("Delay", TimeValue (NanoSeconds (6560)));

  csma.SetDeviceAttribute ("EncapsulationMode", StringValue ("Dix"));
  csma.SetDeviceAttribute ("FrameSize", UintegerValue (2000));

Once the attributes are set, all that remains is to create the devices and install them on the required nodes, and to connect the devices together using a CSMA channel. When we create the net devices, we add them to a container to allow you to use them in the future. This all takes just one line of code.

  NetDeviceContainer csmaDevices = csma.Install (csmaNodes);

This document was generated on August 20, 2010 using texi2html 1.82.