.. include:: replace.txt .. highlight:: console .. _Getting Started: Getting Started --------------- This section is aimed at getting a user to a working state starting with a machine that may never have had |ns3| installed. It covers supported platforms, prerequisites, ways to obtain |ns3|, ways to build |ns3|, and ways to verify your build and run simple programs. Overview ******** |ns3| is built as a system of software libraries that work together. User programs can be written that links with (or imports from) these libraries. User programs are written in either the C++ or Python programming languages. |ns3| is distributed as source code, meaning that the target system needs to have a software development environment to build the libraries first, then build the user program. |ns3| could in principle be distributed as pre-built libraries for selected systems, and in the future it may be distributed that way, but at present, many users actually do their work by editing |ns3| itself, so having the source code around to rebuild the libraries is useful. If someone would like to undertake the job of making pre-built libraries and packages for operating systems, please contact the ns-developers mailing list. In the following, we'll look at three ways of downloading and building |ns3|. The first is to download and build an official release from the main web site. The second is to fetch and build development copies of a basic |ns3| installation. The third is to use an additional build tool to download more extensions for |ns3|. We'll walk through each since the tools involved are slightly different. Experienced Linux users may wonder at this point why |ns3| is not provided like most other libraries using a package management tool? Although there exist some binary packages for various Linux distributions (e.g. Debian), most users end up editing and having to rebuild the |ns3| libraries themselves, so having the source code available is more convenient. We will therefore focus on a source installation in this tutorial. For most uses of |ns3|, root permissions are not needed, and the use of a non-privileged user account is recommended. Prerequisites ************* The entire set of available |ns3| libraries has a number of dependencies on third-party libraries, but most of |ns3| can be built and used with support for a few common (often installed by default) components: a C++ compiler, an installation of Python, a source code editor (such as vim, emacs, or Eclipse) and, if using the development repositories, an installation of Git source code control system. Most beginning users need not concern themselves if their configuration reports some missing optional features of |ns3|, but for those wishing a full installation, the project provides an installation guide for various systems, available at https://www.nsnam.org/docs/installation/html/index.html. As of the most recent |ns3| release (ns-3.41), the following tools are needed to get started with |ns3|: ============ =========================================================== Prerequisite Package/version ============ =========================================================== C++ compiler ``clang++`` or ``g++`` (g++ version 9 or greater) Python ``python3`` version >=3.6 CMake ``cmake`` version >=3.13 Build system ``make``, ``ninja``, ``xcodebuild`` (XCode) Git any recent version (to access |ns3| from `GitLab.com `_) tar any recent version (to unpack an `ns-3 release `_) bunzip2 any recent version (to uncompress an |ns3| release) ============ =========================================================== To check the default version of Python, type ``python -V``. To check the default version of g++, type ``g++ -v``. If your installation is missing or too old, please consult the |ns3| `installation guide `_ for guidance. From this point forward, we are going to assume that the reader is working in Linux, macOS, or a Linux emulation environment, and has at least the above prerequisites. For example, do not use a directory path such as the below, because one of the parent directories contains a space in the directory name: .. sourcecode:: console $ pwd /home/user/5G simulations/ns-3-allinone/ns-3-dev Downloading a release of ns-3 as a source archive +++++++++++++++++++++++++++++++++++++++++++++++++ This option is for the new user who wishes to download and experiment with the most recently released and packaged version of |ns3|. |ns3| publishes its releases as compressed source archives, sometimes referred to as a tarball. A tarball is a particular format of software archive where multiple files are bundled together and the archive is usually compressed. The process for downloading |ns3| via tarball is simple; you just have to pick a release, download it and uncompress it. Let's assume that you, as a user, wish to build |ns3| in a local directory called ``workspace``. If you adopt the ``workspace`` directory approach, you can get a copy of a release by typing the following into your Linux shell (substitute the appropriate version numbers, of course) .. sourcecode:: console $ cd $ mkdir workspace $ cd workspace $ wget https://www.nsnam.org/release/ns-allinone-3.41.tar.bz2 $ tar xjf ns-allinone-3.41.tar.bz2 Notice the use above of the ``wget`` utility, which is a command-line tool to fetch objects from the web; if you do not have this installed, you can use a browser for this step. Following these steps, if you change into the directory ``ns-allinone-3.41``, you should see a number of files and directories .. sourcecode:: text $ cd ns-allinone-3.41 $ ls bake build.py constants.py netanim-3.109 ns-3.41 README.md util.py You are now ready to build the base |ns3| distribution and may skip ahead to the section on building |ns3|. Downloading ns-3 using Git ************************** The |ns3| code is available in Git repositories on the GitLab.com service at https://gitlab.com/nsnam/. The group name ``nsnam`` organizes the various repositories used by the open source project. The simplest way to get started using Git repositories is to fork or clone the ``ns-3-allinone`` environment. This is a set of scripts that manages the downloading and building of the most commonly used subsystems of |ns3| for you. If you are new to Git, the terminology of ``fork`` and ``clone`` may be foreign to you; if so, we recommend that you simply ``clone`` (create your own replica) of the repository found on GitLab.com, as follows: .. sourcecode:: console $ cd $ mkdir workspace $ cd workspace $ git clone https://gitlab.com/nsnam/ns-3-allinone.git $ cd ns-3-allinone At this point, your view of the ns-3-allinone directory is slightly different than described above with a release archive; it should look something like this: .. sourcecode:: console $ ls build.py constants.py download.py README.md util.py Note the presence of the ``download.py`` script, which will further fetch the |ns3| and related sourcecode. At this point, you have a choice, to either download the most recent development snapshot of |ns3|: .. sourcecode:: console $ python3 download.py or to specify a release of |ns3|, using the ``-n`` flag to specify a release number: .. sourcecode:: console $ python3 download.py -n ns-3.41 After this step, the additional repositories of |ns3|, bake, pybindgen, and netanim will be downloaded to the ``ns-3-allinone`` directory. Downloading ns-3 Using Bake +++++++++++++++++++++++++++ The above two techniques (source archive, or ns-3-allinone repository via Git) are useful to get the most basic installation of |ns3| with a few addons (pybindgen for generating Python bindings, and netanim for network animations). The third repository provided by default in ns-3-allinone is called ``bake``. Bake is a tool for coordinated software building from multiple repositories, developed for the |ns3| project. Bake can be used to fetch development versions of the |ns3| software, and to download and build extensions to the base |ns3| distribution, such as the Direct Code Execution environment, Network Simulation Cradle, ability to create new Python bindings, and various |ns3| "apps". If you envision that your |ns3| installation may use advanced or optional features, you may wish to follow this installation path. In recent |ns3| releases, Bake has been included in the release tarball. The configuration file included in the released version will allow one to download any software that was current at the time of the release. That is, for example, the version of Bake that is distributed with the ``ns-3.30`` release can be used to fetch components for that |ns3| release or earlier, but can't be used to fetch components for later releases (unless the ``bakeconf.xml`` package description file is updated). You can also get the most recent copy of ``bake`` by typing the following into your Linux shell (assuming you have installed Git):: $ cd $ mkdir workspace $ cd workspace $ git clone https://gitlab.com/nsnam/bake.git As the git command executes, you should see something like the following displayed: .. sourcecode:: console Cloning into 'bake'... remote: Enumerating objects: 2086, done. remote: Counting objects: 100% (2086/2086), done. remote: Compressing objects: 100% (649/649), done. remote: Total 2086 (delta 1404), reused 2078 (delta 1399) Receiving objects: 100% (2086/2086), 2.68 MiB | 3.82 MiB/s, done. Resolving deltas: 100% (1404/1404), done. After the clone command completes, you should have a directory called ``bake``, the contents of which should look something like the following: .. sourcecode:: console $ cd bake $ ls bake bakeconf.xml bake.py doc examples generate-binary.py test TODO Notice that you have downloaded some Python scripts, a Python module called ``bake``, and an XML configuration file. The next step will be to use those scripts to download and build the |ns3| distribution of your choice. There are a few configuration targets available: 1. ``ns-3.41``: the code corresponding to the release 2. ``ns-3-dev``: a similar module but using the development code tree 3. ``ns-allinone-3.41``: the module that includes other optional features such as bake build system, netanim animator, and pybindgen 4. ``ns-3-allinone``: similar to the released version of the allinone module, but for development code. The current development snapshot (unreleased) of |ns3| may be found and cloned from https://gitlab.com/nsnam/ns-3-dev.git. The developers attempt to keep these repositories in consistent, working states but they are in a development area with unreleased code present, so you may want to consider staying with an official release if you do not need newly- introduced features. You can find the latest version of the code either by inspection of the repository list or by going to the `"ns-3 Releases" `_ web page and clicking on the latest release link. We'll proceed in this tutorial example with ``ns-3.41``. We are now going to use the bake tool to pull down the various pieces of |ns3| you will be using. First, we'll say a word about running bake. Bake works by downloading source packages into a source directory, and installing libraries into a build directory. bake can be run by referencing the binary, but if one chooses to run bake from outside of the directory it was downloaded into, it is advisable to put bake into your path, such as follows (Linux bash shell example). First, change into the 'bake' directory, and then set the following environment variables: .. sourcecode:: console $ export BAKE_HOME=`pwd` $ export PATH=$PATH:$BAKE_HOME/build/bin $ export PYTHONPATH=$BAKE_HOME/build/lib $ export LD_LIBRARY_PATH=$BAKE_HOME/build/lib This will put the bake.py program into the shell's path, and will allow other programs to find executables and libraries created by bake. Although several bake use cases do not require setting PATH and PYTHONPATH as above, full builds of ns-3-allinone (with the optional packages) typically do. Step into the workspace directory and type the following into your shell: .. sourcecode:: console $ ./bake.py configure -e ns-allinone-3.41 Next, we'll ask bake to check whether we have enough tools to download various components. Type: .. sourcecode:: console $ ./bake.py check You should see something like the following: .. sourcecode:: text > Python - OK > GNU C++ compiler - OK > Git - OK > Tar tool - OK > Unzip tool - OK > Make - OK > cMake - OK > patch tool - OK > Path searched for tools: /usr/local/sbin /usr/local/bin /usr/sbin /usr/bin /sbin /bin ... Please install missing tools at this stage, in the usual way for your system (if you are able to), or contact your system administrator as needed to install these tools. Next, try to download the software: .. sourcecode:: console $ ./bake.py download should yield something like: .. sourcecode:: text >> Searching for system dependency libxml2-dev - OK >> Searching for system dependency gi-cairo - OK >> Searching for system dependency gir-bindings - OK >> Searching for system dependency pygobject - OK >> Searching for system dependency pygraphviz - OK >> Searching for system dependency python3-dev - OK >> Searching for system dependency qt - OK >> Searching for system dependency g++ - OK >> Searching for system dependency cmake - OK >> Downloading netanim-3.109 - OK >> Downloading click-ns-3.37 - OK >> Downloading BRITE - OK >> Downloading openflow-dev - OK >> Downloading ns-3.41 (target directory:ns-3.41) - OK The above suggests that three sources have been downloaded. Check the ``source`` directory now and type ``ls``; one should see: .. sourcecode:: console $ cd source $ ls BRITE click-ns-3.37 netanim-3.109 ns-3.41 openflow-dev You are now ready to build the |ns3| distribution. Building ns-3 ************* As with downloading |ns3|, there are a few ways to build |ns3|. The main thing that we wish to emphasize is the following. |ns3| is built with a build tool called ``CMake``, described below. Most users will end up working most directly with the ns3 command-line wrapper for CMake, for the sake of convenience. Therefore, please have a look at ``build.py`` and building with ``bake``, before reading about CMake and the ns3 wrapper below. Building with ``build.py`` ++++++++++++++++++++++++++ **Note:** This build step is only available from a source archive release described above; not from downloading via git or bake. When working from a released tarball, a convenience script available as part of ``ns-3-allinone`` can orchestrate a simple build of components. This program is called ``build.py``. This program will get the project configured for you in the most commonly useful way. However, please note that more advanced configuration and work with |ns3| will typically involve using the native |ns3| build system, CMake, to be introduced later in this tutorial. If you downloaded using a tarball you should have a directory called something like ``ns-allinone-3.41`` under your ``~/workspace`` directory. Type the following: .. sourcecode:: console $ ./build.py --enable-examples --enable-tests Because we are working with examples and tests in this tutorial, and because they are not built by default in |ns3|, the arguments for build.py tells it to build them for us. The program also defaults to building all available modules. Later, you can build |ns3| without examples and tests, or eliminate the modules that are not necessary for your work, if you wish. You will see lots of compiler output messages displayed as the build script builds the various pieces you downloaded. First, the script will attempt to build the netanim animator, and then |ns3|. Building with bake ++++++++++++++++++ If you used bake above to fetch source code from project repositories, you may continue to use it to build |ns3|. Type: .. sourcecode:: console $ ./bake.py build and you should see something like: .. sourcecode:: text >> Building netanim-3.109 - OK >> Building ns-3.41 - OK There may be failures to build all components, but the build will proceed anyway if the component is optional. If there happens to be a failure, please have a look at what the following command tells you; it may give a hint as to a missing dependency: .. sourcecode:: console $ ./bake.py show This will list out the various dependencies of the packages you are trying to build. Building with the ns3 CMake wrapper +++++++++++++++++++++++++++++++++++ Up to this point, we have used either the `build.py` script, or the `bake` tool, to get started with building |ns3|. These tools are useful for building |ns3| and supporting libraries, and they call into the |ns3| directory to call the CMake build tool to do the actual building. CMake needs to be installed before building |ns3|. So, to proceed, please change your working directory to the |ns3| directory that you have initially built. It's not strictly required at this point, but it will be valuable to take a slight detour and look at how to make changes to the configuration of the project. Probably the most useful configuration change you can make will be to build the optimized version of the code. The project will be configured by default using the ``default`` build profile, which is an optimized build with debug information (CMAKE_BUILD_TYPE=relwithdebinfo) version. Let's tell the project to make an optimized build. To maintain a similar interface for command-line users, we include a wrapper script for CMake, |ns3|. To tell |ns3| that it should do optimized builds that include the examples and tests, you will need to execute the following commands: .. sourcecode:: console $ ./ns3 clean $ ./ns3 configure --build-profile=optimized --enable-examples --enable-tests This runs CMake out of the local directory (which is provided as a convenience for you). The first command to clean out the previous build is not typically strictly necessary but is good practice (but see `Build Profiles`_, below); it will remove the previously built libraries and object files found in directory ``build/``. When the project is reconfigured and the build system checks for various dependencies, you should see output that looks similar to the following: .. sourcecode:: console $ ./ns3 configure --build-profile=optimized --enable-examples --enable-tests -- CCache is enabled. Precompiled headers are disabled by default. -- The CXX compiler identification is GNU 11.2.0 -- The C compiler identification is GNU 11.2.0 -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /usr/bin/cc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Using default output directory /mnt/dev/tools/source/ns-3-dev/build -- Found GTK3_GTK: /usr/lib/x86_64-linux-gnu/libgtk-3.so -- GTK3 was found. -- LibXML2 was found. -- LibRT was found. -- Visualizer requires Python bindings -- Found Boost: /usr/lib/x86_64-linux-gnu/cmake/Boost-1.74.0/BoostConfig.cmake (found version "1.74.0") -- Found PkgConfig: /usr/bin/pkg-config (found version "0.29.2") -- GSL was found. -- Found Sphinx: /usr/bin/sphinx-build -- Looking for sys/types.h -- Looking for sys/types.h - found -- Looking for stdint.h -- Looking for stdint.h - found -- Looking for stddef.h -- Looking for stddef.h - found -- Check size of long long -- Check size of long long - done -- Check size of int128_t -- Check size of int128_t - failed -- Check size of __int128_t -- Check size of __int128_t - done -- Performing Test has_hash___int128_t -- Performing Test has_hash___int128_t - Success -- Check size of unsigned long long -- Check size of unsigned long long - done -- Check size of uint128_t -- Check size of uint128_t - failed -- Check size of __uint128_t -- Check size of __uint128_t - done -- Performing Test has_hash___uint128_t -- Performing Test has_hash___uint128_t - Success -- Looking for C++ include inttypes.h -- Looking for C++ include inttypes.h - found -- Looking for C++ include stat.h -- Looking for C++ include stat.h - not found -- Looking for C++ include dirent.h -- Looking for C++ include dirent.h - found -- Looking for C++ include stdlib.h -- Looking for C++ include stdlib.h - found -- Looking for C++ include signal.h -- Looking for C++ include signal.h - found -- Looking for C++ include netpacket/packet.h -- Looking for C++ include netpacket/packet.h - found -- Looking for getenv -- Looking for getenv - found -- Processing src/antenna -- Processing src/aodv -- Processing src/applications -- Processing src/bridge -- Processing src/brite -- Brite was not found -- Processing src/buildings -- Processing src/click -- Click was not found -- Processing src/config-store -- Processing src/core -- Looking for C++ include boost/units/quantity.hpp -- Looking for C++ include boost/units/quantity.hpp - found -- Looking for C++ include boost/units/systems/si.hpp -- Looking for C++ include boost/units/systems/si.hpp - found -- Boost Units have been found. -- Processing src/csma -- Processing src/csma-layout -- Processing src/dsdv -- Processing src/dsr -- Processing src/energy -- Processing src/fd-net-device -- Looking for C++ include net/ethernet.h -- Looking for C++ include net/ethernet.h - found -- Looking for C++ include netpacket/packet.h -- Looking for C++ include netpacket/packet.h - found -- Looking for C++ include net/if.h -- Looking for C++ include net/if.h - found -- Looking for C++ include linux/if_tun.h -- Looking for C++ include linux/if_tun.h - found -- Looking for C++ include net/netmap_user.h -- Looking for C++ include net/netmap_user.h - not found -- Looking for C++ include sys/ioctl.h -- Looking for C++ include sys/ioctl.h - found -- Checking for module 'libdpdk' -- No package 'libdpdk' found -- Processing src/flow-monitor -- Processing src/internet -- Processing src/internet-apps -- Processing src/lr-wpan -- Processing src/lte -- Processing src/mesh -- Processing src/mobility -- Processing src/netanim -- Processing src/network -- Processing src/nix-vector-routing -- Processing src/olsr -- Processing src/openflow -- Openflow was not found -- Processing src/point-to-point -- Processing src/point-to-point-layout -- Processing src/propagation -- Processing src/sixlowpan -- Processing src/spectrum -- Processing src/stats -- Processing src/tap-bridge -- Processing src/test -- Processing src/topology-read -- Processing src/traffic-control -- Processing src/uan -- Processing src/virtual-net-device -- Processing src/wifi -- Processing src/wimax -- ---- Summary of optional NS-3 features: Build profile : optimized Build directory : /mnt/dev/tools/source/ns-3-dev/build BRITE Integration : OFF (missing dependency) DES Metrics event collection : OFF (not requested) DPDK NetDevice : OFF (missing dependency) Emulation FdNetDevice : ON Examples : ON File descriptor NetDevice : ON GNU Scientific Library (GSL) : ON GtkConfigStore : ON MPI Support : OFF (not requested) NS-3 Click Integration : OFF (missing dependency) NS-3 OpenFlow Integration : OFF (missing dependency) Netmap emulation FdNetDevice : OFF (missing dependency) PyViz visualizer : OFF (missing dependency) Python Bindings : OFF (not requested) Real Time Simulator : ON SQLite stats support : ON Tap Bridge : ON Tap FdNetDevice : ON Tests : ON Modules configured to be built: antenna aodv applications bridge buildings config-store core csma csma-layout dsdv dsr energy fd-net-device flow-monitor internet internet-apps lr-wpan lte mesh mobility netanim network nix-vector-routing olsr point-to-point point-to-point-layout propagation sixlowpan spectrum stats tap-bridge test topology-read traffic-control uan virtual-net-device wifi wimax Modules that cannot be built: brite click mpi openflow visualizer -- Configuring done -- Generating done -- Build files have been written to: /mnt/dev/tools/source/ns-3-dev/cmake-cache Finished executing the following commands: mkdir cmake-cache cd cmake-cache; /usr/bin/cmake -DCMAKE_BUILD_TYPE=release -DNS3_NATIVE_OPTIMIZATIONS=ON -DNS3_EXAMPLES=ON -DNS3_TESTS=ON -G Unix Makefiles .. ; cd .. Note the last part of the above output. Some |ns3| options are not enabled by default or require support from the underlying system to work properly (``OFF (not requested)``). Other options might depend on third-party libraries, which if not found will be disabled (``OFF(missing dependency)``). If this library were not found, the corresponding |ns3| feature would not be enabled and a message would be displayed. Note further that there is a feature to use the program ``sudo`` to set the suid bit of certain programs. This is not enabled by default and so this feature is reported as "not enabled." Finally, to reprint this summary of which optional features are enabled, use the ``show config`` option to ns3. Now go ahead and switch back to the debug build that includes the examples and tests. .. sourcecode:: console $ ./ns3 clean $ ./ns3 configure --build-profile=debug --enable-examples --enable-tests The build system is now configured and you can build the debug versions of the |ns3| programs by simply typing: .. sourcecode:: console $ ./ns3 build Although the above steps made you build the |ns3| part of the system twice, now you know how to change the configuration and build optimized code. A command exists for checking which profile is currently active for an already configured project: .. sourcecode:: console $ ./ns3 show profile Build profile: debug The build.py script discussed above supports also the ``--enable-examples`` and ``enable-tests`` arguments and passes them through to the ns-3 configuration, but in general, does not directly support other ns3 options; for example, this will not work: .. sourcecode:: console $ ./build.py --enable-asserts will result in: .. sourcecode:: console build.py: error: no such option: --enable-asserts However, the special operator ``--`` can be used to pass additional configure options through to ns3, so instead of the above, the following will work: .. sourcecode:: console $ ./build.py -- --enable-asserts as it generates the underlying command ``./ns3 configure --enable-asserts``. Here are a few more introductory tips about CMake. Handling build errors ===================== |ns3| releases are tested against the most recent C++ compilers available in the mainstream Linux and macOS distributions at the time of the release. However, over time, newer distributions are released, with newer compilers, and these newer compilers tend to be more pedantic about warnings. |ns3| configures its build to treat all warnings as errors, so it is sometimes the case, if you are using an older release version on a newer system, that a compiler warning will cause the build to fail. For instance, ns-3.28 was released prior to Fedora 28, which included a new major version of gcc (gcc-8). Building ns-3.28 or older releases on Fedora 28, when GTK+2 is installed, will result in an error such as:: /usr/include/gtk-2.0/gtk/gtkfilechooserbutton.h:59:8: error: unnecessary parentheses in declaration of ‘__gtk_reserved1’ [-Werror=parentheses] void (*__gtk_reserved1); In releases starting with ns-3.28.1, an option is available in CMake to work around these issues. The option disables the inclusion of the '-Werror' flag to g++ and clang++. The option is '--disable-werror' and must be used at configure time; e.g.: .. sourcecode:: console ./ns3 configure --disable-werror --enable-examples --enable-tests Configure vs. Build =================== Some CMake commands are only meaningful during the configure phase and some commands are valid in the build phase. For example, if you wanted to use the emulation features of |ns3|, you might want to enable setting the suid bit using sudo as described above. This turns out to be a configuration-time command, and so you could reconfigure using the following command that also includes the examples and tests. .. sourcecode:: console $ ./ns3 configure --enable-sudo --enable-examples --enable-tests If you do this, ns3 will have run sudo to change the socket creator programs of the emulation code to run as root. There are many other configure- and build-time options available in ns3. To explore these options, type: .. sourcecode:: console $ ./ns3 --help We'll use some of the testing-related commands in the next section. Build Profiles ============== We already saw how you can configure CMake for ``debug`` or ``optimized`` builds: .. sourcecode:: console $ ./ns3 configure --build-profile=debug There is also an intermediate build profile, ``release``. ``-d`` is a synonym for ``--build-profile``. The build profile controls the use of logging, assertions, and compiler optimization: .. table:: Build profiles :widths: 10 28 30 30 32 +----------+---------------------------------------------------------------------------------------------------------------------------------+ | Feature | Build Profile | + +---------------------------------+-----------------------------+-------------------------------+---------------------------------+ | | ``debug`` | ``default`` | ``release`` | ``optimized`` | +==========+=================================+=============================+===============================+=================================+ | Enabled | ``NS3_BUILD_PROFILE_DEBUG`` | ``NS3_BUILD_PROFILE_DEBUG`` | ``NS3_BUILD_PROFILE_RELEASE`` | ``NS3_BUILD_PROFILE_OPTIMIZED`` | | Features | ``NS_LOG...`` | ``NS_LOG...`` | | | | | ``NS_ASSERT...`` | ``NS_ASSERT...`` | | | +----------+---------------------------------+-----------------------------+-------------------------------+---------------------------------+ | Code | ``NS_BUILD_DEBUG(code)`` | ``NS_BUILD_DEBUG(code)`` | ``NS_BUILD_RELEASE(code)`` | ``NS_BUILD_OPTIMIZED(code)`` | | Wrapper | | | | | | Macro | | | | | +----------+---------------------------------+-----------------------------+-------------------------------+---------------------------------+ | Compiler | ``-Og -g`` | ``-Os -g`` | ``-O3`` | ``-O3`` | | Flags | | | | ``-march=native`` | | | | | | ``-mtune=native`` | +----------+---------------------------------+-----------------------------+-------------------------------+---------------------------------+ As you can see, logging and assertions are only configured by default in debug builds, although they can be selectively enabled in other build profiles by using the ``--enable-logs`` and ``--enable-asserts`` flags during CMake configuration time. Recommended practice is to develop your scenario in debug mode, then conduct repetitive runs (for statistics or changing parameters) in optimized build profile. If you have code that should only run in specific build profiles, use the indicated Code Wrapper macro: .. sourcecode:: cpp NS_BUILD_DEBUG(std::cout << "Part of an output line..." << std::flush; timer.Start()); DoLongInvolvedComputation(); NS_BUILD_DEBUG(timer.Stop(); std::cout << "Done: " << timer << std::endl;) By default ns3 puts the build artifacts in the ``build`` directory. You can specify a different output directory with the ``--out`` option, e.g. .. sourcecode:: console $ ./ns3 configure --out=my-build-dir Combining this with build profiles lets you switch between the different compile options in a clean way: .. sourcecode:: console $ ./ns3 configure --build-profile=debug --out=build/debug $ ./ns3 build ... $ ./ns3 configure --build-profile=optimized --out=build/optimized $ ./ns3 build ... This allows you to work with multiple builds rather than always overwriting the last build. When you switch, ns3 will only compile what it has to, instead of recompiling everything. When you do switch build profiles like this, you have to be careful to give the same configuration parameters each time. It may be convenient to define some environment variables to help you avoid mistakes: .. sourcecode:: console $ export NS3CONFIG="--enable-examples --enable-tests" $ export NS3DEBUG="--build-profile=debug --out=build/debug" $ export NS3OPT=="--build-profile=optimized --out=build/optimized" $ ./ns3 configure $NS3CONFIG $NS3DEBUG $ ./ns3 build ... $ ./ns3 configure $NS3CONFIG $NS3OPT $ ./ns3 build Compilers and Flags =================== In the examples above, CMake uses the GCC C++ compiler, ``g++``, for building |ns3|. However, it's possible to change the C++ compiler used by CMake by defining the ``CXX`` environment variable. For example, to use the Clang C++ compiler, ``clang++``, .. sourcecode:: console $ CXX="clang++" ./ns3 configure $ ./ns3 build One can also set up ns3 to do distributed compilation with ``distcc`` in a similar way: .. sourcecode:: console $ CXX="distcc g++" ./ns3 configure $ ./ns3 build More info on ``distcc`` and distributed compilation can be found on it's `project page `_ under Documentation section. To add compiler flags, use the ``CXXFLAGS_EXTRA`` environment variable when you configure |ns3|. Install ======= ns3 may be used to install libraries in various places on the system. The default location where libraries and executables are built is in the ``build`` directory, and because ns3 knows the location of these libraries and executables, it is not necessary to install the libraries elsewhere. If users choose to install things outside of the build directory, users may issue the ``./ns3 install`` command. By default, the prefix for installation is ``/usr/local``, so ``./ns3 install`` will install programs into ``/usr/local/bin``, libraries into ``/usr/local/lib``, and headers into ``/usr/local/include``. Superuser privileges are typically needed to install to the default prefix, so the typical command would be ``sudo ./ns3 install``. When running programs with ns3, ns3 will first prefer to use shared libraries in the build directory, then will look for libraries in the library path configured in the local environment. So when installing libraries to the system, it is good practice to check that the intended libraries are being used. Users may choose to install to a different prefix by passing the ``--prefix`` option at configure time, such as:: ./ns3 configure --prefix=/opt/local If later after the build the user issues the ``./ns3 install`` command, the prefix ``/opt/local`` will be used. The ``./ns3 clean`` command should be used prior to reconfiguring the project if ns3 will be used to install things at a different prefix. In summary, it is not necessary to call ``./ns3 install`` to use |ns3|. Most users will not need this command since ns3 will pick up the current libraries from the ``build`` directory, but some users may find it useful if their use case involves working with programs outside of the |ns3| directory. Clean ===== Cleaning refers to the removal of artifacts (e.g. files) generated or edited by the build process. There are different levels of cleaning possible: +----------+-------------------+--------------------------------------------------------------------------------+ | Scope | Command | Description | +==========+===================+================================================================================+ | clean | `./ns3 clean` | Remove artifacts generated by the CMake configuration and the build | +----------+-------------------+--------------------------------------------------------------------------------+ | distclean| `./ns3 distclean` | Remove artifacts from the configuration, build, documentation, test and Python | +----------+-------------------+--------------------------------------------------------------------------------+ | ccache | `ccache -C` | Remove all compiled artifacts from the ccache | +----------+-------------------+--------------------------------------------------------------------------------+ `clean` can be used if the focus is on reconfiguring the way that ns-3 is presently being compiled. `distclean` can be used if the focus is on restoring the ns-3 directory to an original state. The ccache lies outside of the ns-3 directory (typically in a hidden directory at `~/.cache/ccache`) and is shared across projects. Users should be aware that cleaning the ccache will cause cache misses on other build directories outside of the current working directory. Cleaning this cache periodically may be helpful to reclaim disk space. Cleaning the ccache is completely separate from cleaning any files within the ns-3 directory. Because clean operations involve removing files, the option conservatively refuses to remove files if one of the deleted files or directories lies outside of the current working directory. Users may wish to precede the actual clean with a `--dry-run`, when in doubt about what the clean command will do, because a dry run will print the warning if one exists. For example:: ./ns3 clean --dry-run ./ns3 clean One ns3 ======= There is only one ns3 script, at the top level of the |ns3| source tree. As you work, you may find yourself spending a lot of time in ``scratch/``, or deep in ``src/...``, and needing to invoke ns3. You could just remember where you are, and invoke ns3 like this: .. sourcecode:: console $ ../../../ns3 ... but that gets tedious, and error prone, and there are better solutions. One common way when using a text-based editor such as emacs or vim is to open two terminal sessions and use one to build |ns3| and one to edit source code. If you only have the tarball, an environment variable can help: .. sourcecode:: console $ export NS3DIR="$PWD" $ function ns3f { cd $NS3DIR && ./ns3 $* ; } $ cd scratch $ ns3f build It might be tempting in a module directory to add a trivial ``ns3`` script along the lines of ``exec ../../ns3``. Please don't. It's confusing to newcomers, and when done poorly it leads to subtle build errors. The solutions above are the way to go. Building with CMake +++++++++++++++++++ The ns3 wrapper script calls CMake directly, mapping Waf-like options to the verbose settings used by CMake. Calling ``./ns3`` will execute a series of commands, that will be shown at the end of their execution. The execution of those underlying commands can be skipped to just print them using ``./ns3 --dry-run``. Here is are a few examples showing why we suggest the use of the ns3 wrapper script. Configuration command ===================== .. sourcecode:: console $ ./ns3 configure --enable-tests --enable-examples -d optimized Corresponds to .. sourcecode:: console $ cd /ns-3-dev/cmake-cache/ $ cmake -DCMAKE_BUILD_TYPE=release -DNS3_NATIVE_OPTIMIZATIONS=ON -DNS3_ASSERT=OFF -DNS3_LOG=OFF -DNS3_TESTS=ON -DNS3_EXAMPLES=ON .. Build command ============= To build a specific target such as ``test-runner`` we use the following ns3 command: .. sourcecode:: console $ ./ns3 build test-runner Which corresponds to the following commands: .. sourcecode:: console $ cd /ns-3-dev/cmake-cache/ $ cmake --build . -j 16 --target test-runner # This command builds the test-runner target with the underlying build system To build all targets such as modules, examples and tests, we use the following ns3 command: .. sourcecode:: console $ ./ns3 build Which corresponds to: .. sourcecode:: console $ cd /ns-3-dev/cmake-cache/ $ cmake --build . -j 16 # This command builds all the targets with the underlying build system Run command =========== .. sourcecode:: console $ ./ns3 run test-runner Corresponds to: .. sourcecode:: console $ cd /ns-3-dev/cmake-cache/ $ cmake --build . -j 16 --target test-runner # This command builds the test-runner target calling the underlying build system $ export PATH=$PATH:/ns-3-dev/build/:/ns-3-dev/build/lib:/ns-3-dev/build/bindings/python # export library paths $ export LD_LIBRARY_PATH=/ns-3-dev/build/:/ns-3-dev/build/lib:/ns-3-dev/build/bindings/python $ export PYTHON_PATH=/ns-3-dev/build/:/ns-3-dev/build/lib:/ns-3-dev/build/bindings/python $ /ns-3-dev/build/utils/ns3-dev-test-runner-optimized # call the executable with the real path Note: the command above would fail if ``./ns3 build`` was not executed first, since the examples won't be built by the test-runner target. On Windows, the Msys2/MinGW64/bin directory path must be on the PATH environment variable, otherwise the DLL's required by the C++ runtime will not be found, resulting in crashes without any explicit reasoning. Note: The ns-3 script adds only the ns-3 lib directory path to the PATH, ensuring the ns-3 DLLs will be found by running programs. If you are using CMake directly or an IDE, make sure to also include the path to ns-3-dev/build/lib in the PATH variable. .. _setx : https://docs.microsoft.com/en-us/windows-server/administration/windows-commands/setx/ If you are using one of Windows's terminals (CMD, PowerShell or Terminal), you can use the `setx`_ command to change environment variables permanently or `set` to set them temporarily for that shell: .. sourcecode:: console C:\\Windows\\system32>echo %PATH% C:\\Windows\\system32;C:\\Windows;D:\\tools\\msys64\\mingw64\\bin; C:\\Windows\\system32>setx PATH "%PATH%;D:\\tools\\msys64\\usr\\bin;" /m C:\\Windows\\system32>echo %PATH% C:\\Windows\\system32;C:\\Windows;D:\\tools\\msys64\\mingw64\\bin; D:\\tools\\msys64\\usr\\bin; Note: running on an administrator terminal will change the system PATH, while the user terminal will change the user PATH, unless the `/m` flag is added. Building with IDEs ++++++++++++++++++ With CMake, IDE integration is much easier. We list the steps on how to use ns-3 with a few IDEs. Microsoft Visual Studio Code ============================ Start by downloading `VS Code `_. Then install it and then install the CMake and C++ plugins. This can be done accessing the extensions' menu button on the left. .. figure:: ../figures/vscode/install_cmake_tools.png .. figure:: ../figures/vscode/install_cpp_tools.png It will take a while, but it will locate the available toolchains for you to use. After that, open the ns-3-dev folder. It should run CMake automatically and preconfigure it. .. figure:: ../figures/vscode/open_project.png After this happens, you can choose ns-3 features by opening the CMake cache and toggling them on or off. .. figure:: ../figures/vscode/open_cmake_cache.png .. figure:: ../figures/vscode/configure_ns3.png Just as an example, here is how to enable examples .. figure:: ../figures/vscode/enable_examples_and_save_to_reload_cache.png After saving the cache, CMake will run, refreshing the cache. Then VsCode will update its list of targets on the left side of the screen in the CMake menu. After selecting a target on the left side menu, there are options to build, run or debug it. .. figure:: ../figures/vscode/select_target_build_and_debug.png Any of them will automatically build the selected target. If you choose run or debug, the executable targets will be executed. You can open the source files you want, put some breakpoints and then click debug to visually debug programs. .. figure:: ../figures/vscode/debugging.png Note: If you are running on Windows, you need to manually add your ns-3 library directory to the ``PATH`` environment variable. This can be accomplished in two ways. The first, is to set VSCode's ``settings.json`` file to include the following: .. sourcecode:: json "cmake.environment": { "PATH": "${env:PATH};${workspaceFolder}/build/lib" } The second, a more permanent solution, with the following command: .. sourcecode:: console > echo %PATH% C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem; C:\Windows\System32\OpenSSH\;C:\Program Files\dotnet\;C:\Program Files\PuTTY\;C:\Program Files\VSCodium\bin; C:\Program Files\Meld\;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\system32;C:\Windows; C:\Windows\System32\Wbem;C:\Windows\System32\OpenSSH\;C:\Program Files\dotnet\;C:\Program Files\PuTTY\; C:\Program Files\VSCodium\bin;C:\Program Files\Meld\;C:\Users\username\AppData\Local\Microsoft\WindowsApps; > setx PATH "%PATH%;C:\path\to\ns-3-dev\build\lib" SUCCESS: Specified value was saved. > echo %PATH% C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem; ... C:\Program Files\VSCodium\bin;C:\Program Files\Meld\;C:\Users\username\AppData\Local\Microsoft\WindowsApps; C:\tools\source\ns-3-dev\build\lib; If you do not setup your ``PATH`` environment variable, you may end up having problems to debug that look like the following: .. sourcecode:: console =thread-group-added,id="i1" GNU gdb (GDB) 14.1 Copyright (C) 2023 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later ... ERROR: Unable to start debugging. GDB exited unexpectedly. The program 'C:\tools\source\ns-3-dev\build\examples\wireless\ns3-dev-wifi-he-network-debug.exe' has exited with code 0 (0x00000000). ERROR: During startup program exited with code 0xc0000135. Or .. sourcecode:: console =thread-group-added,id="i1" GNU gdb (GDB) 14.1 Copyright (C) 2023 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later ... ERROR: Unable to start debugging. Unexpected GDB output from command "-exec-run". During startup program exited with code 0xc0000135. The program 'C:\tools\source\ns-3-dev\build\examples\wireless\ns3-dev-wifi-he-network-debug.exe' has exited with code 0 (0x00000000). JetBrains CLion =============== Start by downloading `CLion `_. The following image contains the toolchain configuration window for CLion running on Windows (only WSLv2 is currently supported). .. figure:: ../figures/clion/toolchains.png CLion uses Makefiles for your platform as the default generator. Here you can choose a better generator like `ninja` by setting the cmake options flag to `-G Ninja`. You can also set options to enable examples (`-DNS3_EXAMPLES=ON`) and tests (`-DNS3_TESTS=ON`). .. figure:: ../figures/clion/cmake_configuration.png To refresh the CMake cache, triggering the discovery of new targets (libraries, executables and/or modules), you can either configure to re-run CMake automatically after editing CMake files (pretty slow and easily triggered) or reload it manually. The following image shows how to trigger the CMake cache refresh. .. figure:: ../figures/clion/reload_cache.png After configuring the project, the available targets are listed in a drop-down list on the top right corner. Select the target you want and then click the hammer symbol to build, as shown in the image below. .. figure:: ../figures/clion/build_targets.png If you have selected and executable target, you can click either the play button to execute the program; the bug to debug the program; the play button with a chip, to run Valgrind and analyze memory usage, leaks and so on. .. figure:: ../figures/clion/run_target.png Code::Blocks ============ Start by installing `Code::Blocks `_. Code::Blocks does not support CMake project natively, but we can use the corresponding CMake generator to generate a project in order to use it. The generator name depends on the operating system and underlying build system. https://cmake.org/cmake/help/latest/generator/CodeBlocks.html .. sourcecode:: console $ ./ns3 configure -G"CodeBlocks - Ninja" --enable-examples ... $ -- Build files have been written to: /ns-3-dev/cmake-cache There will be a NS3.cbp file inside the cache folder used during configuration (in this case cmake-cache). This is a Code::Blocks project file that can be opened by the IDE. When you first open the IDE, you will be greeted by a window asking you to select the compiler you want. .. figure:: ../figures/codeblocks/compiler_detection.png After that you will get into the landing page where you can open the project. .. figure:: ../figures/codeblocks/landing.png Loading it will take a while. .. figure:: ../figures/codeblocks/open_project.png After that we can select a target in the top menu (where it says "all") and click to build, run or debug. We can also set breakpoints on the source code. .. figure:: ../figures/codeblocks/breakpoint_and_debug.png After clicking to build, the build commands of the underlying build system will be printed in the tab at the bottom. If you clicked to debug, the program will start automatically and stop at the first breakpoint. .. figure:: ../figures/codeblocks/build_finished_breakpoint_waiting.png You can inspect memory and the current stack enabling those views in Debug->Debugging Windows->Watches and Call Stack. Using the debugging buttons, you can advance line by line, continue until the next breakpoint. .. figure:: ../figures/codeblocks/debug_watches.png Note: as Code::Blocks doesn't natively support CMake projects, it doesn't refresh the CMake cache, which means you will need to close the project, run the ``./ns3`` command to refresh the CMake caches after adding/removing source files to/from the CMakeLists.txt files, adding a new module or dependencies between modules. Apple XCode ============ Start by installing `XCode `_. Then open it for the first time and accept the license. Then open Xcode->Preferences->Locations and select the command-line tools location. .. figure:: ../figures/xcode/select_command_line.png XCode does not support CMake project natively, but we can use the corresponding CMake generator to generate a project in order to use it. The generator name depends on the operating system and underlying build system. https://cmake.org/cmake/help/latest/generator/Xcode.html .. sourcecode:: console $ ./ns3 configure -GXcode --enable-examples ... $ -- Build files have been written to: /ns-3-dev/cmake-cache There will be a NS3.xcodeproj file inside the cache folder used during configuration (in this case cmake-cache). This is a XCode project file that can be opened by the IDE. Loading the project will take a while, and you will be greeted with the following prompt. Select to automatically create the schemes. .. figure:: ../figures/xcode/create_schemes.png After that we can select a target in the top menu and click to run, which will build and run (if executable, or debug if build with debugging symbols). .. figure:: ../figures/xcode/target_dropdown.png After clicking to build, the build will start and progress is shown in the top bar. .. figure:: ../figures/xcode/select_target_and_build.png Before debugging starts, Xcode will request for permissions to attach to the process (as an attacker could pretend to be a debugging tool and steal data from other processes). .. figure:: ../figures/xcode/debug_permission_to_attach.png After attaching, we are greeted with profiling information and call stack on the left panel, source code, breakpoint and warnings on the central panel. At the bottom there are the memory watches panel in the left and the output panel on the right, which is also used to read the command line. .. figure:: ../figures/xcode/profiling_stack_watches_output.png Note: as XCode doesn't natively support CMake projects, it doesn't refresh the CMake cache, which means you will need to close the project, run the ``./ns3`` command to refresh the CMake caches after adding/removing source files to/from the CMakeLists.txt files, adding a new module or dependencies between modules. Testing ns-3 ************ You can run the unit tests of the |ns3| distribution by running the ``./test.py`` script: .. sourcecode:: console $ ./test.py --no-build These tests are run in parallel by ns3. You should eventually see a report saying that .. sourcecode:: text 92 of 92 tests passed (92 passed, 0 failed, 0 crashed, 0 valgrind errors) This is the important message to check for; failures, crashes, or valgrind errors indicate problems with the code or incompatibilities between the tools and the code. You will also see the summary output from ns3 and the test runner executing each test, which will actually look something like: .. sourcecode:: console -- CCache is enabled -- The CXX compiler identification is GNU 11.2.0 -- The C compiler identification is GNU 11.2.0 ... -- Configuring done -- Generating done -- Build files have been written to: /ns-3-dev/cmake-cache ... Scanning dependencies of target tap-creator [ 1%] Building CXX object src/fd-net-device/CMakeFiles/tap-device-creator.dir/helper/tap-device-creator.cc.o [ 1%] Building CXX object src/tap-bridge/CMakeFiles/tap-creator.dir/model/tap-creator.cc.o [ 1%] Building CXX object src/fd-net-device/CMakeFiles/raw-sock-creator.dir/helper/creator-utils.cc.o [ 1%] Building CXX object src/tap-bridge/CMakeFiles/tap-creator.dir/model/tap-encode-decode.cc.o [ 1%] Linking CXX executable ../../../build/src/fd-net-device/ns3-dev-tap-device-creator ... [100%] Linking CXX executable ../../../build/examples/matrix-topology/ns3-dev-matrix-topology [100%] Built target manet-routing-compare [100%] Built target matrix-topology [1/742] PASS: TestSuite aodv-routing-id-cache [2/742] PASS: TestSuite routing-aodv [3/742] PASS: TestSuite uniform-planar-array-test [4/742] PASS: TestSuite angles ... [740/742] PASS: Example src/wifi/examples/wifi-manager-example --wifiManager=MinstrelHt --standard=802.11ax-6GHz --serverChannelWidth=160 --clientChannelWidth=160 --serverShortGuardInterval=3200 --clientShortGuardInterval=3200 --serverNss=4 --clientNss=4 --stepTime=0.1 [741/742] PASS: Example src/lte/examples/lena-radio-link-failure --numberOfEnbs=2 --useIdealRrc=0 --interSiteDistance=700 --simTime=17 [742/742] PASS: Example src/lte/examples/lena-radio-link-failure --numberOfEnbs=2 --interSiteDistance=700 --simTime=17 739 of 742 tests passed (739 passed, 3 skipped, 0 failed, 0 crashed, 0 valgrind errors) This command is typically run by users to quickly verify that an |ns3| distribution has built correctly. (Note the order of the ``PASS: ...`` lines can vary, which is okay. What's important is that the summary line at the end report that all tests passed; none failed or crashed.) Both ns3 and ``test.py`` will split up the job on the available CPU cores of the machine, in parallel. Running a Script **************** We typically run scripts under the control of ns3. This allows the build system to ensure that the shared library paths are set correctly and that the libraries are available at run time. To run a program, simply use the ``--run`` option in ns3. Let's run the |ns3| equivalent of the ubiquitous hello world program by typing the following: .. sourcecode:: console $ ./ns3 run hello-simulator ns3 first checks to make sure that the program is built correctly and executes a build if required. ns3 then executes the program, which produces the following output. .. sourcecode:: text Hello Simulator Congratulations! You are now an ns-3 user! **What do I do if I don't see the output?** If you see ns3 messages indicating that the build was completed successfully, but do not see the "Hello Simulator" output, chances are that you have switched your build mode to ``optimized`` in the `Building with the ns3 CMake wrapper`_ section, but have missed the change back to ``debug`` mode. All of the console output used in this tutorial uses a special |ns3| logging component that is useful for printing user messages to the console. Output from this component is automatically disabled when you compile optimized code -- it is "optimized out." If you don't see the "Hello Simulator" output, type the following: .. sourcecode:: console $ ./ns3 configure --build-profile=debug --enable-examples --enable-tests to tell ns3 to build the debug versions of the |ns3| programs that includes the examples and tests. You must still build the actual debug version of the code by typing .. sourcecode:: console $ ./ns3 Now, if you run the ``hello-simulator`` program, you should see the expected output. Program Arguments +++++++++++++++++ To feed command line arguments to an |ns3| program use this pattern: .. sourcecode:: console $ ./ns3 run --command-template="%s " Substitute your program name for ````, and the arguments for ````. The ``--command-template`` argument to ns3 is basically a recipe for constructing the actual command line ns3 should use to execute the program. ns3 checks that the build is complete, sets the shared library paths, then invokes the executable using the provided command line template, inserting the program name for the ``%s`` placeholder. If you find the above to be syntactically complicated, a simpler variant exists, which is to include the |ns3| program and its arguments enclosed by single quotes, such as: .. sourcecode:: console $ ./ns3 run ' --arg1=value1 --arg2=value2 ...' Another particularly useful example is to run a test suite by itself. Let's assume that a ``mytest`` test suite exists (it doesn't). Above, we used the ``./test.py`` script to run a whole slew of tests in parallel, by repeatedly invoking the real testing program, ``test-runner``. To invoke ``test-runner`` directly for a single test: .. sourcecode:: console $ ./ns3 run test-runner --command-template="%s --suite=mytest --verbose" This passes the arguments to the ``test-runner`` program. Since ``mytest`` does not exist, an error message will be generated. To print the available ``test-runner`` options: .. sourcecode:: console $ ./ns3 run test-runner --command-template="%s --help" Debugging +++++++++ To run |ns3| programs under the control of another utility, such as a debugger (*e.g.* ``gdb``) or memory checker (*e.g.* ``valgrind``), you use a similar ``--command-template="..."`` form. For example, to run your |ns3| program ``hello-simulator`` with the arguments ```` under the ``gdb`` debugger: .. sourcecode:: console $ ./ns3 run hello-simulator --command-template="gdb %s --args " Notice that the |ns3| program name goes with the ``--run`` argument, and the control utility (here ``gdb``) is the first token in the ``--command-template`` argument. The ``--args`` tells ``gdb`` that the remainder of the command line belongs to the "inferior" program. (Some ``gdb``'s don't understand the ``--args`` feature. In this case, omit the program arguments from the ``--command-template``, and use the ``gdb`` command ``set args``.) We can combine this recipe and the previous one to run a test under the debugger: .. sourcecode:: console $ ./ns3 run test-runner --command-template="gdb %s --args --suite=mytest --verbose" Working Directory +++++++++++++++++ ns3 needs to run from its location at the top of the |ns3| tree. This becomes the working directory where output files will be written. But what if you want to keep those files out of the |ns3| source tree? Use the ``--cwd`` argument: .. sourcecode:: console $ ./ns3 run program-name --cwd=... We mention this ``--cwd`` command for completeness; most users will simply run ns3 from the top-level directory and generate the output data files there. Running without Building ++++++++++++++++++++++++ As of the ns-3.30 release, a new ns3 option was introduced to allow the running of programs while skipping the build step. This can reduce the time to run programs when, for example, running the same program repeatedly through a shell script, or when demonstrating program execution. The option ``--no-build`` modifies the ``run`` option, skipping the build steps of the program and required ns-3 libraries. .. sourcecode:: console $ ./ns3 run ' --arg1=value1 --arg2=value2 ...' --no-build Build version +++++++++++++ As of the ns-3.32 release, a new ns3 configure option ``--enable-build-version`` was introduced which inspects the local ns3 git repository during builds and adds version metadata to the core module. This configuration option has the following prerequisites: - The ns-3 directory must be part of a local git repository - The local git repository must have at least one ns-3 release tag or - A file named version.cache, containing version information, is located in the src/core directory If these prerequisites are not met, the configuration will fail. When these prerequisites are met and ns-3 is configured with the ``--enable-build-version`` option, the ns3 command ``show version`` can be used to query the local git repository and display the current version metadata. .. sourcecode:: console $ ./ns3 show version ns3 will collect information about the build and print out something similar to the output below. .. sourcecode:: text ns-3.33+249@g80e0dd0-dirty-debug If ``show version`` is run when ``--enable-build-version`` was not configured, an error message indicating that the option is disabled will be displayed instead. .. sourcecode:: text Build version support is not enabled, reconfigure with --enable-build-version flag The build information is generated by examining the current state of the git repository. The output of ``show version`` will change whenever the state of the active branch changes. The output of ``show version`` has the following format: .. sourcecode:: text [+closest_tag][+distance_from_tag]@[-tree_state]- version_tag version_tag contains the version of the ns-3 code. The version tag is defined as a git tag with the format ns-3*. If multiple git tags match the format, the tag on the active branch which is closest to the current commit is chosen. closest_tag closest_tag is similar to version_tag except it is the first tag found, regardless of format. The closest tag is not included in the output when closest_tag and version_tag have the same value. distance_from_tag distance_from_tag contains the number of commits between the current commit and closest_tag. distance_from_tag is not included in the output when the value is 0 (i.e. when closest_tag points to the current commit) commit_hash commit_hash is the hash of the commit at the tip of the active branch. The value is 'g' followed by the first 7 characters of the commit hash. The 'g' prefix is used to indicate that this is a git hash. tree_state tree_state indicates the state of the working tree. When the working tree has uncommitted changes this field has the value 'dirty'. The tree state is not included in the version output when the working tree is clean (e.g. when there are no uncommitted changes). profile The build profile specified in the ``--build-profile`` option passed to ``ns3 configure`` A new class, named Version, has been added to the core module. The Version class contains functions to retrieve individual fields of the build version as well as functions to print the full build version like ``show version``. The ``build-version-example`` application provides an example of how to use the Version class to retrieve the various build version fields. See the documentation for the Version class for specifics on the output of the Version class functions. The version information stored in the Version class is updated every time the git repository changes. This may lead to frequent recompilations/linking of the core module when the ``--enable-build-version`` option is configured. .. sourcecode:: text build-version-example: Program Version (according to CommandLine): ns-3.33+249@g80e0dd0-dirty-debug Version fields: LongVersion: ns-3.33+249@g80e0dd0-dirty-debug ShortVersion: ns-3.33+* BuildSummary: ns-3.33+* VersionTag: ns-3.33 Major: 3 Minor: 33 Patch: 0 ReleaseCandidate: ClosestAncestorTag: ns-3.33 TagDistance: 249 CommitHash: g80e0dd0 BuildProfile: debug WorkingTree: dirty The CommandLine class has also been updated to support the ``--version`` option which will print the full build version and exit. .. sourcecode:: text ./ns3 run "command-line-example --version" --no-build ns-3.33+249@g80e0dd0-dirty-debug If the ``--enable-build-version`` option was not configured, ``--version`` will print out a message similar to ``show version`` indicating that the build version option is not enabled. Source version ++++++++++++++ An alternative to storing build version information in the |ns3| libraries is to track the source code version used to build the code. When using Git, the following recipe can be added to Bash shell scripts to create a ``version.txt`` file with Git revision information, appended with a patch of any changes to that revision if the repository is dirty. The resulting text file can then be saved with any corresponding |ns3| simulation results. .. sourcecode:: console echo `git describe` > version.txt gitDiff=`git diff` if [[ $gitDiff ]] then echo "$gitDiff" >> version.txt fi