A Discrete-Event Network Simulator
API
ns3::LrWpanNetDevice Class Reference

Network layer to device interface. More...

#include "lr-wpan-net-device.h"

+ Inheritance diagram for ns3::LrWpanNetDevice:
+ Collaboration diagram for ns3::LrWpanNetDevice:

Public Member Functions

 LrWpanNetDevice (void)
 
virtual ~LrWpanNetDevice (void)
 
virtual void AddLinkChangeCallback (Callback< void > callback)
 
int64_t AssignStreams (int64_t stream)
 Assign a fixed random variable stream number to the random variables used by this model. More...
 
virtual Address GetAddress (void) const
 This method indirects to LrWpanMac::SetShortAddress () More...
 
virtual Address GetBroadcast (void) const
 
virtual Ptr< ChannelGetChannel (void) const
 
Ptr< LrWpanCsmaCaGetCsmaCa (void) const
 Get the CSMA/CA implementation used by this NetDevice. More...
 
virtual uint32_t GetIfIndex (void) const
 
Ptr< LrWpanMacGetMac (void) const
 Get the MAC used by this NetDevice. More...
 
virtual uint16_t GetMtu (void) const
 
virtual Address GetMulticast (Ipv4Address multicastGroup) const
 Make and return a MAC multicast address using the provided multicast group. More...
 
virtual Address GetMulticast (Ipv6Address addr) const
 Get the MAC multicast address corresponding to the IPv6 address provided. More...
 
virtual Ptr< NodeGetNode (void) const
 
Ptr< LrWpanPhyGetPhy (void) const
 Get the PHY used by this NetDevice. More...
 
virtual bool IsBridge (void) const
 Return true if the net device is acting as a bridge. More...
 
virtual bool IsBroadcast (void) const
 
virtual bool IsLinkUp (void) const
 
virtual bool IsMulticast (void) const
 
virtual bool IsPointToPoint (void) const
 Return true if the net device is on a point-to-point link. More...
 
void McpsDataIndication (McpsDataIndicationParams params, Ptr< Packet > pkt)
 The callback used by the MAC to hand over incoming packets to the NetDevice. More...
 
virtual bool NeedsArp (void) const
 
virtual bool Send (Ptr< Packet > packet, const Address &dest, uint16_t protocolNumber)
 
virtual bool SendFrom (Ptr< Packet > packet, const Address &source, const Address &dest, uint16_t protocolNumber)
 
virtual void SetAddress (Address address)
 This method indirects to LrWpanMac::SetShortAddress () More...
 
void SetChannel (Ptr< SpectrumChannel > channel)
 Set the channel to which the NetDevice, and therefore the PHY, should be attached to. More...
 
void SetCsmaCa (Ptr< LrWpanCsmaCa > csmaca)
 Set the CSMA/CA implementation to be used by the MAC and this NetDevice. More...
 
virtual void SetIfIndex (const uint32_t index)
 
void SetMac (Ptr< LrWpanMac > mac)
 Set the MAC to be used by this NetDevice. More...
 
virtual bool SetMtu (const uint16_t mtu)
 
virtual void SetNode (Ptr< Node > node)
 
void SetPhy (Ptr< LrWpanPhy > phy)
 Set the PHY to be used by the MAC and this NetDevice. More...
 
virtual void SetPromiscReceiveCallback (PromiscReceiveCallback cb)
 
virtual void SetReceiveCallback (NetDevice::ReceiveCallback cb)
 
virtual bool SupportsSendFrom (void) const
 
- Public Member Functions inherited from ns3::NetDevice
virtual ~NetDevice ()
 
- Public Member Functions inherited from ns3::Object
 Object ()
 Constructor. More...
 
virtual ~Object ()
 Destructor. More...
 
void AggregateObject (Ptr< Object > other)
 Aggregate two Objects together. More...
 
void Dispose (void)
 Dispose of this Object. More...
 
AggregateIterator GetAggregateIterator (void) const
 Get an iterator to the Objects aggregated to this one. More...
 
virtual TypeId GetInstanceTypeId (void) const
 Get the most derived TypeId for this Object. More...
 
template<typename T >
Ptr< T > GetObject (void) const
 Get a pointer to the requested aggregated Object. More...
 
template<typename T >
Ptr< T > GetObject (TypeId tid) const
 Get a pointer to the requested aggregated Object by TypeId. More...
 
void Initialize (void)
 Invoke DoInitialize on all Objects aggregated to this one. More...
 
bool IsInitialized (void) const
 Check if the object has been initialized. More...
 
- Public Member Functions inherited from ns3::SimpleRefCount< Object, ObjectBase, ObjectDeleter >
 SimpleRefCount ()
 Default constructor. More...
 
 SimpleRefCount (const SimpleRefCount &o)
 Copy constructor. More...
 
uint32_t GetReferenceCount (void) const
 Get the reference count of the object. More...
 
SimpleRefCountoperator= (const SimpleRefCount &o)
 Assignment operator. More...
 
void Ref (void) const
 Increment the reference count. More...
 
void Unref (void) const
 Decrement the reference count. More...
 
- Public Member Functions inherited from ns3::ObjectBase
virtual ~ObjectBase ()
 Virtual destructor. More...
 
void GetAttribute (std::string name, AttributeValue &value) const
 Get the value of an attribute, raising fatal errors if unsuccessful. More...
 
bool GetAttributeFailSafe (std::string name, AttributeValue &value) const
 Get the value of an attribute without raising erros. More...
 
void SetAttribute (std::string name, const AttributeValue &value)
 Set a single attribute, raising fatal errors if unsuccessful. More...
 
bool SetAttributeFailSafe (std::string name, const AttributeValue &value)
 Set a single attribute without raising errors. More...
 
bool TraceConnect (std::string name, std::string context, const CallbackBase &cb)
 Connect a TraceSource to a Callback with a context. More...
 
bool TraceConnectWithoutContext (std::string name, const CallbackBase &cb)
 Connect a TraceSource to a Callback without a context. More...
 
bool TraceDisconnect (std::string name, std::string context, const CallbackBase &cb)
 Disconnect from a TraceSource a Callback previously connected with a context. More...
 
bool TraceDisconnectWithoutContext (std::string name, const CallbackBase &cb)
 Disconnect from a TraceSource a Callback previously connected without a context. More...
 

Static Public Member Functions

static TypeId GetTypeId (void)
 Get the type ID. More...
 
- Static Public Member Functions inherited from ns3::NetDevice
static TypeId GetTypeId (void)
 Get the type ID. More...
 
- Static Public Member Functions inherited from ns3::Object
static TypeId GetTypeId (void)
 Register this type. More...
 
- Static Public Member Functions inherited from ns3::ObjectBase
static TypeId GetTypeId (void)
 Get the type ID. More...
 

Private Member Functions

Mac48Address BuildPseudoMacAddress (uint16_t panId, Mac16Address shortAddr) const
 Builds a Mac48Address from the PanId and Short Address The form is PanId : 0x0 : 0x0 : ShortAddress. More...
 
void CompleteConfig (void)
 Configure PHY, MAC and CSMA/CA. More...
 
virtual void DoDispose (void)
 Destructor implementation. More...
 
Ptr< SpectrumChannelDoGetChannel (void) const
 Attribute accessor method for the "Channel" attribute. More...
 
virtual void DoInitialize (void)
 Initialize() implementation. More...
 
void LinkDown (void)
 Mark NetDevice link as down. More...
 
void LinkUp (void)
 Mark NetDevice link as up. More...
 

Private Attributes

bool m_configComplete
 True if MAC, PHY and CSMA/CA where successfully configured and the NetDevice is ready for being used. More...
 
Ptr< LrWpanCsmaCam_csmaca
 The CSMA/CA implementation for this NetDevice. More...
 
uint32_t m_ifIndex
 The interface index of this NetDevice. More...
 
TracedCallback m_linkChanges
 Trace source for link up/down changes. More...
 
bool m_linkUp
 Is the link/device currently up and running? More...
 
Ptr< LrWpanMacm_mac
 The MAC for this NetDevice. More...
 
Ptr< Nodem_node
 The node associated with this NetDevice. More...
 
Ptr< LrWpanPhym_phy
 The PHY for this NetDevice. More...
 
ReceiveCallback m_receiveCallback
 Upper layer callback used for notification of new data packet arrivals. More...
 
bool m_useAcks
 Configure the NetDevice to request MAC layer acknowledgments when sending packets using the Send() API. More...
 

Additional Inherited Members

- Public Types inherited from ns3::NetDevice
typedef void(* LinkChangeTracedCallback) (void)
 TracedCallback signature for link changed event. More...
 
enum  PacketType {
  PACKET_HOST = 1, NS3_PACKET_HOST = PACKET_HOST, PACKET_BROADCAST, NS3_PACKET_BROADCAST = PACKET_BROADCAST,
  PACKET_MULTICAST, NS3_PACKET_MULTICAST = PACKET_MULTICAST, PACKET_OTHERHOST, NS3_PACKET_OTHERHOST = PACKET_OTHERHOST
}
 Packet types are used as they are in Linux. More...
 
typedef Callback< bool, Ptr< NetDevice >, Ptr< const Packet >, uint16_t, const Address &, const Address &, enum PacketTypePromiscReceiveCallback
 
typedef Callback< bool, Ptr< NetDevice >, Ptr< const Packet >, uint16_t, const Address &> ReceiveCallback
 
- Protected Member Functions inherited from ns3::Object
 Object (const Object &o)
 Copy an Object. More...
 
virtual void NotifyNewAggregate (void)
 Notify all Objects aggregated to this one of a new Object being aggregated. More...
 
- Protected Member Functions inherited from ns3::ObjectBase
void ConstructSelf (const AttributeConstructionList &attributes)
 Complete construction of ObjectBase; invoked by derived classes. More...
 
virtual void NotifyConstructionCompleted (void)
 Notifier called once the ObjectBase is fully constructed. More...
 

Detailed Description

Network layer to device interface.


The ns3::NetDevice includes IP-specific API such as GetMulticast(), Send() and SendTo() methods, which do not map well the the 802.15.4 MAC MCPS DataRequest primitive. So, the basic design is to provide, as much as makes sense, the class ns3::NetDevice API, but rely on the user accessing the LrWpanMac pointer to make 802.15.4-specific API calls. As such, this is really just an encapsulating class.

Config Paths

ns3::LrWpanNetDevice is accessible through the following paths with Config::Set and Config::Connect:

  • "/NodeList/[i]/DeviceList/[i]/$ns3::LrWpanNetDevice"

Attributes

No TraceSources are defined for this type.
Size of this type is 96 bytes (on a 64-bit architecture).

Definition at line 49 of file lr-wpan-net-device.h.

Constructor & Destructor Documentation

◆ LrWpanNetDevice()

ns3::LrWpanNetDevice::LrWpanNetDevice ( void  )

Definition at line 72 of file lr-wpan-net-device.cc.

References CompleteConfig(), m_csmaca, m_mac, m_phy, and NS_LOG_FUNCTION.

+ Here is the call graph for this function:

◆ ~LrWpanNetDevice()

ns3::LrWpanNetDevice::~LrWpanNetDevice ( void  )
virtual

Definition at line 82 of file lr-wpan-net-device.cc.

References NS_LOG_FUNCTION.

Member Function Documentation

◆ AddLinkChangeCallback()

void ns3::LrWpanNetDevice::AddLinkChangeCallback ( Callback< void >  callback)
virtual
Parameters
callbackthe callback to invoke

Add a callback invoked whenever the link status changes to UP. This callback is typically used by the IP/ARP layer to flush the ARP cache and by IPv6 stack to flush NDISC cache whenever the link goes up.

Implements ns3::NetDevice.

Definition at line 319 of file lr-wpan-net-device.cc.

References ns3::TracedCallback< T1, T2, T3, T4, T5, T6, T7, T8 >::ConnectWithoutContext(), m_linkChanges, and NS_LOG_FUNCTION.

+ Here is the call graph for this function:

◆ AssignStreams()

int64_t ns3::LrWpanNetDevice::AssignStreams ( int64_t  stream)

Assign a fixed random variable stream number to the random variables used by this model.

Return the number of streams that have been assigned.

Parameters
streamfirst stream index to use
Returns
the number of stream indices assigned by this model

Definition at line 510 of file lr-wpan-net-device.cc.

References m_csmaca, m_phy, NS_LOG_DEBUG, and NS_LOG_FUNCTION.

◆ BuildPseudoMacAddress()

Mac48Address ns3::LrWpanNetDevice::BuildPseudoMacAddress ( uint16_t  panId,
Mac16Address  shortAddr 
) const
private

Builds a Mac48Address from the PanId and Short Address The form is PanId : 0x0 : 0x0 : ShortAddress.

Parameters
panIdThe PanID
shortMacThe Short MAC address
Returns
a Pseudo-Mac48Adress

Definition at line 489 of file lr-wpan-net-device.cc.

References ns3::Mac48Address::CopyFrom(), ns3::Mac16Address::CopyTo(), and NS_LOG_FUNCTION.

Referenced by GetAddress(), GetBroadcast(), and GetMulticast().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ CompleteConfig()

◆ DoDispose()

void ns3::LrWpanNetDevice::DoDispose ( void  )
privatevirtual

Destructor implementation.

This method is called by Dispose() or by the Object's destructor, whichever comes first.

Subclasses are expected to implement their real destruction code in an overridden version of this method and chain up to their parent's implementation once they are done. i.e, for simplicity, the destructor of every subclass should be empty and its content should be moved to the associated DoDispose() method.

It is safe to call GetObject() from within this method.

Reimplemented from ns3::Object.

Definition at line 89 of file lr-wpan-net-device.cc.

References ns3::Object::DoDispose(), m_csmaca, m_mac, m_node, m_phy, and NS_LOG_FUNCTION.

+ Here is the call graph for this function:

◆ DoGetChannel()

Ptr< SpectrumChannel > ns3::LrWpanNetDevice::DoGetChannel ( void  ) const
private

Attribute accessor method for the "Channel" attribute.

Returns
the channel to which this NetDevice is attached

Definition at line 244 of file lr-wpan-net-device.cc.

References m_phy, and NS_LOG_FUNCTION.

Referenced by GetTypeId().

+ Here is the caller graph for this function:

◆ DoInitialize()

void ns3::LrWpanNetDevice::DoInitialize ( void  )
privatevirtual

Initialize() implementation.

This method is called only once by Initialize(). If the user calls Initialize() multiple times, DoInitialize() is called only the first time.

Subclasses are expected to override this method and chain up to their parent's implementation once they are done. It is safe to call GetObject() and AggregateObject() from within this method.

Reimplemented from ns3::Object.

Definition at line 105 of file lr-wpan-net-device.cc.

References ns3::Object::DoInitialize(), m_mac, m_phy, and NS_LOG_FUNCTION.

+ Here is the call graph for this function:

◆ GetAddress()

Address ns3::LrWpanNetDevice::GetAddress ( void  ) const
virtual

This method indirects to LrWpanMac::SetShortAddress ()

Returns
The short address.

Implements ns3::NetDevice.

Definition at line 279 of file lr-wpan-net-device.cc.

References BuildPseudoMacAddress(), m_mac, and NS_LOG_FUNCTION.

+ Here is the call graph for this function:

◆ GetBroadcast()

Address ns3::LrWpanNetDevice::GetBroadcast ( void  ) const
virtual
Returns
the broadcast address supported by this netdevice.

Calling this method is invalid if IsBroadcast returns not true.

Implements ns3::NetDevice.

Definition at line 333 of file lr-wpan-net-device.cc.

References BuildPseudoMacAddress(), ns3::Mac16Address::GetBroadcast(), m_mac, and NS_LOG_FUNCTION.

+ Here is the call graph for this function:

◆ GetChannel()

Ptr< Channel > ns3::LrWpanNetDevice::GetChannel ( void  ) const
virtual
Returns
the channel this NetDevice is connected to. The value returned can be zero if the NetDevice is not yet connected to any channel or if the underlying NetDevice has no concept of a channel. i.e., callers must check for zero and be ready to handle it.

Implements ns3::NetDevice.

Definition at line 221 of file lr-wpan-net-device.cc.

References m_phy, and NS_LOG_FUNCTION.

◆ GetCsmaCa()

Ptr< LrWpanCsmaCa > ns3::LrWpanNetDevice::GetCsmaCa ( void  ) const

Get the CSMA/CA implementation used by this NetDevice.

Returns
the CSMA/CA implementation object

Definition at line 201 of file lr-wpan-net-device.cc.

References m_csmaca, and NS_LOG_FUNCTION.

◆ GetIfIndex()

uint32_t ns3::LrWpanNetDevice::GetIfIndex ( void  ) const
virtual
Returns
index ifIndex of the device

Implements ns3::NetDevice.

Definition at line 214 of file lr-wpan-net-device.cc.

References m_ifIndex, and NS_LOG_FUNCTION.

◆ GetMac()

◆ GetMtu()

uint16_t ns3::LrWpanNetDevice::GetMtu ( void  ) const
virtual
Returns
the link-level MTU in bytes for this interface.

This value is typically used by the IP layer to perform IP fragmentation when needed.

Implements ns3::NetDevice.

Definition at line 301 of file lr-wpan-net-device.cc.

References NS_LOG_FUNCTION.

Referenced by Send().

+ Here is the caller graph for this function:

◆ GetMulticast() [1/2]

Address ns3::LrWpanNetDevice::GetMulticast ( Ipv4Address  multicastGroup) const
virtual

Make and return a MAC multicast address using the provided multicast group.

RFC 1112 says that an Ipv4 host group address is mapped to an Ethernet multicast address by placing the low-order 23-bits of the IP address into the low-order 23 bits of the Ethernet multicast address 01-00-5E-00-00-00 (hex). Similar RFCs exist for Ipv6 and Eui64 mappings. This method performs the multicast address creation function appropriate to the underlying MAC address of the device. This MAC address is encapsulated in an abstract Address to avoid dependencies on the exact MAC address format.

In the case of net devices that do not support multicast, clients are expected to test NetDevice::IsMulticast and avoid attempting to map multicast packets. Subclasses of NetDevice that do support multicasting are expected to override this method and provide an implementation appropriate to the particular device.

Parameters
multicastGroupThe IP address for the multicast group destination of the packet.
Returns
The MAC multicast Address used to send packets to the provided multicast group.
Warning
Calling this method is invalid if IsMulticast returns not true.
See also
IsMulticast()

Implements ns3::NetDevice.

Definition at line 350 of file lr-wpan-net-device.cc.

References NS_ABORT_MSG.

◆ GetMulticast() [2/2]

Address ns3::LrWpanNetDevice::GetMulticast ( Ipv6Address  addr) const
virtual

Get the MAC multicast address corresponding to the IPv6 address provided.

Parameters
addrIPv6 address
Returns
the MAC multicast address
Warning
Calling this method is invalid if IsMulticast returns not true.

Implements ns3::NetDevice.

Definition at line 357 of file lr-wpan-net-device.cc.

References BuildPseudoMacAddress(), ns3::Mac16Address::GetMulticast(), m_mac, and NS_LOG_FUNCTION.

+ Here is the call graph for this function:

◆ GetNode()

Ptr< Node > ns3::LrWpanNetDevice::GetNode ( void  ) const
virtual
Returns
the node base class which contains this network interface.

When a subclass needs to get access to the underlying node base class to print the nodeid for example, it can invoke this method.

Implements ns3::NetDevice.

Definition at line 434 of file lr-wpan-net-device.cc.

References m_node, and NS_LOG_FUNCTION.

◆ GetPhy()

Ptr< LrWpanPhy > ns3::LrWpanNetDevice::GetPhy ( void  ) const

Get the PHY used by this NetDevice.

Returns
the PHY object

Definition at line 194 of file lr-wpan-net-device.cc.

References m_phy, and NS_LOG_FUNCTION.

Referenced by GetTypeId(), and LrWpanCcaTestCase::PhyRxEnd().

+ Here is the caller graph for this function:

◆ GetTypeId()

TypeId ns3::LrWpanNetDevice::GetTypeId ( void  )
static

Get the type ID.

Returns
the object TypeId

Definition at line 44 of file lr-wpan-net-device.cc.

References DoGetChannel(), GetMac(), GetPhy(), m_useAcks, ns3::MakeBooleanAccessor(), ns3::MakeBooleanChecker(), ns3::MakePointerAccessor(), SetMac(), ns3::TypeId::SetParent(), and SetPhy().

+ Here is the call graph for this function:

◆ IsBridge()

bool ns3::LrWpanNetDevice::IsBridge ( void  ) const
virtual

Return true if the net device is acting as a bridge.

Returns
value of m_isBridge flag

Implements ns3::NetDevice.

Definition at line 367 of file lr-wpan-net-device.cc.

References NS_LOG_FUNCTION.

◆ IsBroadcast()

bool ns3::LrWpanNetDevice::IsBroadcast ( void  ) const
virtual
Returns
true if this interface supports a broadcast address, false otherwise.

Implements ns3::NetDevice.

Definition at line 326 of file lr-wpan-net-device.cc.

References NS_LOG_FUNCTION.

◆ IsLinkUp()

bool ns3::LrWpanNetDevice::IsLinkUp ( void  ) const
virtual
Returns
true if link is up; false otherwise

Implements ns3::NetDevice.

Definition at line 312 of file lr-wpan-net-device.cc.

References m_linkUp, m_phy, and NS_LOG_FUNCTION.

◆ IsMulticast()

bool ns3::LrWpanNetDevice::IsMulticast ( void  ) const
virtual
Returns
value of m_isMulticast flag

Implements ns3::NetDevice.

Definition at line 343 of file lr-wpan-net-device.cc.

References NS_LOG_FUNCTION.

◆ IsPointToPoint()

bool ns3::LrWpanNetDevice::IsPointToPoint ( void  ) const
virtual

Return true if the net device is on a point-to-point link.

Returns
value of m_isPointToPoint flag

Implements ns3::NetDevice.

Definition at line 374 of file lr-wpan-net-device.cc.

References NS_LOG_FUNCTION.

◆ LinkDown()

void ns3::LrWpanNetDevice::LinkDown ( void  )
private

Mark NetDevice link as down.

Definition at line 236 of file lr-wpan-net-device.cc.

References m_linkChanges, m_linkUp, and NS_LOG_FUNCTION.

◆ LinkUp()

void ns3::LrWpanNetDevice::LinkUp ( void  )
private

Mark NetDevice link as up.

Definition at line 228 of file lr-wpan-net-device.cc.

References m_linkChanges, m_linkUp, and NS_LOG_FUNCTION.

◆ McpsDataIndication()

void ns3::LrWpanNetDevice::McpsDataIndication ( McpsDataIndicationParams  params,
Ptr< Packet pkt 
)

The callback used by the MAC to hand over incoming packets to the NetDevice.

This callback will in turn use the ReceiveCallback set by SetReceiveCallback() to notify upper layers.

Parameters
params802.15.4 specific parameters, including source and destination addresses
pktthe packet do be delivered

Definition at line 474 of file lr-wpan-net-device.cc.

References m_receiveCallback, ns3::McpsDataIndicationParams::m_srcAddr, and NS_LOG_FUNCTION.

Referenced by CompleteConfig().

+ Here is the caller graph for this function:

◆ NeedsArp()

bool ns3::LrWpanNetDevice::NeedsArp ( void  ) const
virtual
Returns
true if ARP is needed, false otherwise.

Called by higher-layers to check if this NetDevice requires ARP to be used.

Implements ns3::NetDevice.

Definition at line 449 of file lr-wpan-net-device.cc.

References NS_LOG_FUNCTION.

◆ Send()

bool ns3::LrWpanNetDevice::Send ( Ptr< Packet packet,
const Address dest,
uint16_t  protocolNumber 
)
virtual
Parameters
packetpacket sent from above down to Network Device
destmac address of the destination (already resolved)
protocolNumberidentifies the type of payload contained in this packet. Used to call the right L3Protocol when the packet is received.

Called from higher layer to send packet into Network Device to the specified destination Address

Returns
whether the Send operation succeeded

Implements ns3::NetDevice.

Definition at line 381 of file lr-wpan-net-device.cc.

References ns3::Mac16Address::ConvertFrom(), ns3::Mac16Address::CopyFrom(), ns3::Address::CopyTo(), GetMtu(), ns3::Packet::GetSize(), ns3::Mac48Address::IsMatchingType(), ns3::McpsDataRequestParams::m_dstAddr, ns3::McpsDataRequestParams::m_dstAddrMode, ns3::McpsDataRequestParams::m_dstPanId, m_mac, ns3::McpsDataRequestParams::m_msduHandle, ns3::McpsDataRequestParams::m_srcAddrMode, ns3::McpsDataRequestParams::m_txOptions, m_useAcks, NS_LOG_ERROR, NS_LOG_FUNCTION, ns3::SHORT_ADDR, and ns3::TX_OPTION_ACK.

+ Here is the call graph for this function:

◆ SendFrom()

bool ns3::LrWpanNetDevice::SendFrom ( Ptr< Packet packet,
const Address source,
const Address dest,
uint16_t  protocolNumber 
)
virtual
Parameters
packetpacket sent from above down to Network Device
sourcesource mac address (so called "MAC spoofing")
destmac address of the destination (already resolved)
protocolNumberidentifies the type of payload contained in this packet. Used to call the right L3Protocol when the packet is received.

Called from higher layer to send packet into Network Device with the specified source and destination Addresses.

Returns
whether the Send operation succeeded

Implements ns3::NetDevice.

Definition at line 426 of file lr-wpan-net-device.cc.

References NS_ABORT_MSG.

◆ SetAddress()

void ns3::LrWpanNetDevice::SetAddress ( Address  address)
virtual

◆ SetChannel()

void ns3::LrWpanNetDevice::SetChannel ( Ptr< SpectrumChannel channel)

Set the channel to which the NetDevice, and therefore the PHY, should be attached to.

Parameters
channelthe channel to be used

Definition at line 178 of file lr-wpan-net-device.cc.

References third::channel, CompleteConfig(), m_phy, and NS_LOG_FUNCTION.

+ Here is the call graph for this function:

◆ SetCsmaCa()

void ns3::LrWpanNetDevice::SetCsmaCa ( Ptr< LrWpanCsmaCa csmaca)

Set the CSMA/CA implementation to be used by the MAC and this NetDevice.

Parameters
csmacathe CSMA/CA implementation to be used

Definition at line 170 of file lr-wpan-net-device.cc.

References CompleteConfig(), m_csmaca, and NS_LOG_FUNCTION.

+ Here is the call graph for this function:

◆ SetIfIndex()

void ns3::LrWpanNetDevice::SetIfIndex ( const uint32_t  index)
virtual
Parameters
indexifIndex of the device

Implements ns3::NetDevice.

Definition at line 207 of file lr-wpan-net-device.cc.

References m_ifIndex, and NS_LOG_FUNCTION.

◆ SetMac()

void ns3::LrWpanNetDevice::SetMac ( Ptr< LrWpanMac mac)

Set the MAC to be used by this NetDevice.

Parameters
macthe MAC to be used

Definition at line 154 of file lr-wpan-net-device.cc.

References CompleteConfig(), m_mac, third::mac, and NS_LOG_FUNCTION.

Referenced by GetTypeId().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ SetMtu()

bool ns3::LrWpanNetDevice::SetMtu ( const uint16_t  mtu)
virtual
Parameters
mtuMTU value, in bytes, to set for the device
Returns
whether the MTU value was within legal bounds

Override for default MTU defined on a per-type basis.

Implements ns3::NetDevice.

Definition at line 294 of file lr-wpan-net-device.cc.

References NS_ABORT_MSG.

◆ SetNode()

void ns3::LrWpanNetDevice::SetNode ( Ptr< Node node)
virtual
Parameters
nodethe node associated to this netdevice.

This method is called from ns3::Node::AddDevice.

Implements ns3::NetDevice.

Definition at line 441 of file lr-wpan-net-device.cc.

References CompleteConfig(), m_node, and NS_LOG_FUNCTION.

+ Here is the call graph for this function:

◆ SetPhy()

void ns3::LrWpanNetDevice::SetPhy ( Ptr< LrWpanPhy phy)

Set the PHY to be used by the MAC and this NetDevice.

Parameters
phythe PHY to be used

Definition at line 162 of file lr-wpan-net-device.cc.

References CompleteConfig(), m_phy, NS_LOG_FUNCTION, and third::phy.

Referenced by GetTypeId().

+ Here is the call graph for this function:
+ Here is the caller graph for this function:

◆ SetPromiscReceiveCallback()

void ns3::LrWpanNetDevice::SetPromiscReceiveCallback ( PromiscReceiveCallback  cb)
virtual
Parameters
cbcallback to invoke whenever a packet has been received in promiscuous mode and must be forwarded to the higher layers.

Enables netdevice promiscuous mode and sets the callback that will handle promiscuous mode packets. Note, promiscuous mode packets means all packets, including those packets that can be sensed by the netdevice but which are intended to be received by other hosts.

Implements ns3::NetDevice.

Definition at line 463 of file lr-wpan-net-device.cc.

References NS_LOG_WARN.

◆ SetReceiveCallback()

void ns3::LrWpanNetDevice::SetReceiveCallback ( NetDevice::ReceiveCallback  cb)
virtual
Parameters
cbcallback to invoke whenever a packet has been received and must be forwarded to the higher layers.

Set the callback to be used to notify higher layers when a packet has been received.

Implements ns3::NetDevice.

Definition at line 456 of file lr-wpan-net-device.cc.

References m_receiveCallback, and NS_LOG_FUNCTION.

◆ SupportsSendFrom()

bool ns3::LrWpanNetDevice::SupportsSendFrom ( void  ) const
virtual
Returns
true if this interface supports a bridging mode, false otherwise.

Implements ns3::NetDevice.

Definition at line 482 of file lr-wpan-net-device.cc.

References NS_LOG_FUNCTION_NOARGS.

Member Data Documentation

◆ m_configComplete

bool ns3::LrWpanNetDevice::m_configComplete
private

True if MAC, PHY and CSMA/CA where successfully configured and the NetDevice is ready for being used.

Definition at line 227 of file lr-wpan-net-device.h.

Referenced by CompleteConfig().

◆ m_csmaca

Ptr<LrWpanCsmaCa> ns3::LrWpanNetDevice::m_csmaca
private

The CSMA/CA implementation for this NetDevice.

Definition at line 216 of file lr-wpan-net-device.h.

Referenced by AssignStreams(), CompleteConfig(), DoDispose(), GetCsmaCa(), LrWpanNetDevice(), and SetCsmaCa().

◆ m_ifIndex

uint32_t ns3::LrWpanNetDevice::m_ifIndex
private

The interface index of this NetDevice.

Definition at line 243 of file lr-wpan-net-device.h.

Referenced by GetIfIndex(), and SetIfIndex().

◆ m_linkChanges

TracedCallback ns3::LrWpanNetDevice::m_linkChanges
private

Trace source for link up/down changes.

Definition at line 248 of file lr-wpan-net-device.h.

Referenced by AddLinkChangeCallback(), LinkDown(), and LinkUp().

◆ m_linkUp

bool ns3::LrWpanNetDevice::m_linkUp
private

Is the link/device currently up and running?

Definition at line 238 of file lr-wpan-net-device.h.

Referenced by IsLinkUp(), LinkDown(), and LinkUp().

◆ m_mac

Ptr<LrWpanMac> ns3::LrWpanNetDevice::m_mac
private

◆ m_node

Ptr<Node> ns3::LrWpanNetDevice::m_node
private

The node associated with this NetDevice.

Definition at line 221 of file lr-wpan-net-device.h.

Referenced by CompleteConfig(), DoDispose(), GetNode(), and SetNode().

◆ m_phy

Ptr<LrWpanPhy> ns3::LrWpanNetDevice::m_phy
private

◆ m_receiveCallback

ReceiveCallback ns3::LrWpanNetDevice::m_receiveCallback
private

Upper layer callback used for notification of new data packet arrivals.

Definition at line 253 of file lr-wpan-net-device.h.

Referenced by McpsDataIndication(), and SetReceiveCallback().

◆ m_useAcks

bool ns3::LrWpanNetDevice::m_useAcks
private

Configure the NetDevice to request MAC layer acknowledgments when sending packets using the Send() API.

Definition at line 233 of file lr-wpan-net-device.h.

Referenced by GetTypeId(), and Send().


The documentation for this class was generated from the following files: