Difference between revisions of "HOWTO use ns-3 in the ORBIT testbed environment"

From Nsnam
Jump to: navigation, search
(HOWTO use ns-3 in the ORBIT testbed environment)
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
{{TOC}}
 
{{TOC}}
 +
 +
'''Note:''' Some of the ns-3 documentation is stale below, as it references a program emu-udp-echo-client
 +
and emu-udp-echo-server that are not part of ns-3.  The closest corresponding program in current ns-3
 +
(as of ns-3.22) is src/fd-net-device/examples/fd-emu-udp-echo.cc.
  
 
We provide a realtime emulation package that allows us to connect ns-3 to real
 
We provide a realtime emulation package that allows us to connect ns-3 to real
Line 237: Line 241:
 
you just found, for example,
 
you just found, for example,
  
        ed->SetAddress ("06:60:b3:ac:2b:f5");
+
    ed->SetAddress (Mac48Address::ConvertFrom (Mac48Address ("00:00:00:00:00:01")));
 +
 
 +
becomes
 +
 
 +
    ed->SetAddress (Mac48Address::ConvertFrom (Mac48Address ("06:60:b3:ac:2b:f5")))'
  
 
Save the changes and build
 
Save the changes and build
  
     d.  ./waf
+
     d.  cd ..
 +
    e.  ./waf
  
 
4.  Set the hardware address of the interface in the client script on node [1,2]
 
4.  Set the hardware address of the interface in the client script on node [1,2]
Line 264: Line 273:
 
you just found, for example,
 
you just found, for example,
  
          ed->SetAddress ("06:60:b3:b0:c6:a4");
+
    ed->SetAddress (Mac48Address::ConvertFrom (Mac48Address ("00:00:00:00:00:01")));
 +
 
 +
becomes
 +
 
 +
    ed->SetAddress (Mac48Address::ConvertFrom (Mac48Address ("06:60:b3:b0:c6:a4")))'
 +
 
  
 
Save the changes and build
 
Save the changes and build
  
     d.  ./waf
+
     d.  cd ..
 +
    e.  ./waf
  
 
In this simple example, we are just going to manually start one ns-3 simulation
 
In this simple example, we are just going to manually start one ns-3 simulation
Line 295: Line 310:
 
----
 
----
  
[[User:Craigdo|Craigdo]] 02:28, 13 January 2009 (UTC)
+
[[User:Craigdo|Craigdo]] 19:30, 14 July 2009 (UTC)

Latest revision as of 21:57, 6 October 2014

Main Page - Current Development - Developer FAQ - Tools - Related Projects - Project Ideas - Summer Projects

Installation - Troubleshooting - User FAQ - HOWTOs - Samples - Models - Education - Contributed Code - Papers

Note: Some of the ns-3 documentation is stale below, as it references a program emu-udp-echo-client and emu-udp-echo-server that are not part of ns-3. The closest corresponding program in current ns-3 (as of ns-3.22) is src/fd-net-device/examples/fd-emu-udp-echo.cc.

We provide a realtime emulation package that allows us to connect ns-3 to real networks on real machines. Typically the real network will be a testbed of some kind. ORBIT is a two-tier laboratory emulator/field trial network project of WINLAB (Wireless Information Network Laboratory), at Rutgers. This wireless network emulator provides a large two-dimensional grid of 400 802.11 radio nodes as well as a number of smaller "sandbox" testbeds to allow one to test without reserving the main grid.

In HOWTO use ns-3 directly on the ORBIT testbed hardware we showed how to use the ORBIT hardware as a basis for ns-3 experiments. This HOWTO shows how one can use ORBIT tools to automate the process of getting an experiment run.

We assume that you have some experience with the ORBIT system and understand the basic environment. If you are new to ORBIT, please take a look at http://www.orbit-lab.org/ and go through the "Basic Tutorial" and the "Tutorials on controlling the testbed nodes" at a minimum. We will assume throughout this HOWTO that you have registered for an ORBIT account and have made a reservation on the ORBIT Scheduler for a testbed. This HOWTO assumes that you are on the sandbox one (sb1) testbed. We further assume that you have at least read the HOWTO use ns-3 directly on the ORBIT testbed hardware and understand what it is we are trying to automate here.

HOWTO use ns-3 in the ORBIT testbed environment

We provide a node image on the ORBIT system that includes everything you need to get an ns-3 environment up and running on your testbed nodes. This includes the GNU toolchain, a copy of a precompiled ns-3.3 repository, emacs editor, etc. The first step is to get this environment up on the nodes in your testbed. In ORBIT terminology, we need to "image the nodes."

1. Connect to the sandbox console, image the sandbox nodes and power them up

   a.  ssh your-orbit-user-name@console.sb1.orbit-lab.org;
   b.  orbit load all ns-3.5.ndz 1200

This is a somewhat time-consuming process since you are actually copying disk images to the sandbox nodes. We have a relatively large image since it contains the entire GNU toolchain, ns-3, its reference traces, NSC, etc., and so we need to bump up the default timeout (with the 1200 second timeout specified in 1.a above). The example below took almost seventeen minutes to complete, so you must have patience!

You should see status messages appearing which indicate that the imaging process is proceeding as expected:

      Imaging nodes: 'system:topo:all' with image 'ns-3.5.ndz'
     (Domain:  default from hostname)
     (Timeout:  1200 sec.)
      INFO init: NodeHandler Version 4.4.0 (1921)
      INFO init: Experiment ID: sb1_2009_07_10_01_07_20
      INFO NodeHandler: Shutdown Flag Set - Switching all nodes Off...
      INFO Experiment: load system:exp:stdlib
      INFO prop.resetDelay: resetDelay = 210:Fixnum
      INFO prop.resetTries: resetTries = 1:Fixnum
      INFO Experiment: load system:exp:imageNode
      INFO prop.nodes: nodes = "system:topo:all":String
      INFO prop.image: image = "ns-3.5.ndz":String
      INFO prop.domain: domain = nil:NilClass
      INFO prop.timeout: timeout = 1200:Fixnum
      INFO Topology: Loading topology 'system:topo:all'.
      INFO stdlib: Waiting for nodes (Up/Down/Total): 0/2/2 - (still down: n_1_1,n_1_2)
      
      ...
      INFO whenAll: *: 'status[@value='UP']' fires
      INFO exp: Progress(0/0/2): 0/0/0 min(n_1_2)/avg/max (82) - Timeout: 1110 sec.
      INFO exp: Progress(0/0/2): 0/0/0 min(n_1_2)/avg/max (82) - Timeout: 1100 sec.
      INFO exp: Progress(0/0/2): 0/0/0 min(n_1_2)/avg/max (82) - Timeout: 1090 sec.
           
      ...
      
      INFO exp: Progress(1/0/2): 90/95/100 min(n_1_2)/avg/max (82) - Timeout: 225 sec.
      INFO exp: Progress(1/0/2): 90/95/100 min(n_1_2)/avg/max (82) - Timeout: 215 sec.
      INFO exp: Progress(2/0/2): 100/100/100 min()/avg/max (82) - Timeout: 205 sec.
      INFO exp:  -----------------------------
      INFO exp:  Imaging Process Done
      INFO exp:  - 2 node(s) succesfully imaged - See the topology file: 'system_topo_active_sb1.rb'
      INFO exp:  -----------------------------
      INFO Experiment: DONE!
      INFO ExecApp: Application 'commServer' finished
      INFO run: Experiment sb1_2009_07_13_02_47_05 finished after 16:46     

You can now take a look at the status of the nodes. Observe that they are in the POWEROFF state

   c.  orbit stat
       -----------------------------------------------
        INFO Topology: Loading topology 'system:topo:all'.
        Testbed : sb1
        Node n_1_1 - State: POWEROFF
        Node n_1_2 - State: POWEROFF
       -----------------------------------------------

You can now power up the nodes in the sandbox

   d.  orbit tell on all
        INFO Topology: Loading topology 'system:topo:all'.
       ---------------------------------------------------
        Testbed : sb1 - Command: on
        Node n_1_2 - Ok
        Node n_1_1 - Ok
       ---------------------------------------------------

and see that the nodes are now powered up (you may have to wait for a short time to see the state change happen)

   e.  orbit stat
       -----------------------------------------------
        INFO Topology: Loading topology 'system:topo:all'.
        Testbed : sb1
        Node n_1_1 - State: POWERON
        Node n_1_2 - State: POWERON
       -----------------------------------------------

When you are done with this step, the sandbox nodes will have been powered up and will be in the process of booting. You need to wait until this process has completed. One way to do this is to ping the sandbox nodes.

2. Ping the sandbox nodes to make sure they are up.

   a.  ping -c 1 node1-1
   PING node1-1.sb1.orbit-lab.org (10.11.1.1) 56(84) bytes of data.
   64 bytes from node1-1.sb1.orbit-lab.org (10.11.1.1): icmp_seq=1 ttl=64 time=0.422 ms
   
   --- node1-1.sb1.orbit-lab.org ping statistics ---
   1 packets transmitted, 1 received, 0% packet loss, time 0ms
   rtt min/avg/max/mdev = 0.422/0.422/0.422/0.000 ms
   b.  ping -c 1 node1-2
   PING node1-2.sb1.orbit-lab.org (10.11.1.2) 56(84) bytes of data.
   64 bytes from node1-2.sb1.orbit-lab.org (10.11.1.2): icmp_seq=1 ttl=64 time=3.62 ms
   
   --- node1-2.sb1.orbit-lab.org ping statistics ---
   1 packets transmitted, 1 received, 0% packet loss, time 0ms
   rtt min/avg/max/mdev = 3.624/3.624/3.624/0.000 ms

Now, you can write a simple ruby script to go out and pull the updated ns-3 code from the repository. Using your favorite editor, copy the following code into a file called "ns-3-prepare.rb":

   Experiment.name = "ns-3-prepare"
   
   defGroup('server', [1,1]) { |node|
     node.image = "ns-3.5.ndz"
   }
   
   defGroup('client', [1,2]) { |node|
     node.image = "ns-3.5.ndz"
   }
   
   whenAllUp() { |node|
     allGroups.exec("/usr/local/bin/wlanconfig ath0 destroy")
     wait 2
     group("server").exec("/usr/local/bin/wlanconfig ath0 create wlandev wifi0 wlanmode ap")
     wait 2
     group("client").exec("/usr/local/bin/wlanconfig ath0 create wlandev wifi0 wlanmode sta")
     wait 2
     allGroups.exec("ifconfig ath0 promisc up")
     wait 2
     allGroups.exec("cd /home/repos/ns-3.3; hg pull http://code.nsnam.org/craigdo/ns-3.3-orbit; hg update; ./waf")
     wait 500
     Experiment.done
   }
   Sidebar:  Note the wait statements in the above code.  There is
   apparently no way to execute a command synchronously on multiple nodes
   using ORBIT tools.  Thus, we seem  faced with a tradeoff.  Either ssh
   into the nodes and perform the actions manually and synchronously,
   or automate them and possibly wait longer than absolutely necessary.
   It seems safe to control-C out of the script after the compilations
   are done.

2. Execute the ns-3-prepare.rb command script.

   a.  orbit exec ns-3-prepare
   INFO init: NodeHandler Version 4.2.0 (1272)
   INFO init: Experiment ID: sb1_2009_01_12_20_34_55
   INFO Experiment: load system:exp:stdlib
   INFO prop.resetDelay: resetDelay = 210:Fixnum
   INFO prop.resetTries: resetTries = 1:Fixnum
   INFO Experiment: load ns-3-prepare
   INFO stdlib: Waiting for nodes (Up/Down/Total): 0/2/2 - (still down: n_1_2,n_1_1)
   ...
   INFO whenAll: *: 'status[@value='UP']' fires
   INFO whenAll: *: 'status[@value='UP']' fires
   INFO exp: Request from Experiment Script: Wait for 10s....
   Event DONE.OK (from /usr/local/bin/wlanconfig@n_1_2): status: 0
   Event DONE.OK (from /usr/local/bin/wlanconfig@n_1_1): status: 0
   INFO exp: Request from Experiment Script: Wait for 10s....
   ...
   INFO exp: Request from Experiment Script: Wait for 500s....
   Message (from cd@n_1_2):  pulling from http://code.nsnam.org/craigdo/ns-3.3-orbit
   Message (from cd@n_1_2):  searching for changes
   Message (from cd@n_1_2):  no changes found
   ...
   familiar waf output from ns-3
   ...
   Event DONE.OK (from cd@n_1_1): status: 0
   INFO Experiment: DONE!
   INFO ExecApp: Application 'commServer' finished
   INFO run: Experiment sb1_2009_01_12_20_34_55 finished after 10:35

Notice that this script has taken care of setting up the wireless devices for you.

Now you can run the example ns-3 client server scripts on the testbed. We have configured [1,1] device "ath0" as an access point, and [1,2] device "ath0" as a station. Both devices must be in promiscuous mode. This can all be verified by using "ifconfig" and "iwconfig" on the appropriate console.

This is annoying, but for now we have got to manually set the hardware address of the interfaces in the ns-3 simulation script.

3. Set the hardware address of the interface in the server script on node [1,1]

   a. ifconfig

Locate the output for the device ath0 in the output of ifconfig

       ath0      Link encap:Ethernet  HWaddr 06:60:b3:ac:2b:f5
                 inet6 addr: fe80::460:b3ff:feac:2bf5/64 Scope:Link
                 UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
                 RX packets:1728 errors:0 dropped:0 overruns:0 frame:0
                 TX packets:42 errors:0 dropped:0 overruns:0 carrier:0
                 collisions:0 txqueuelen:0
                 RX bytes:1769806 (1.6 MiB)  TX bytes:2216 (2.1 KiB)

Copy the HWaddr to the clipboard (in this case, 06:60:b3:ac:2b:f5)

   b.  cd examples
   c.  emacs emu-udp-echo-server.cc     # or use your favorite editor

Search for the MAC address assigmnet and replace the string with the HWaddr you just found, for example,

   ed->SetAddress (Mac48Address::ConvertFrom (Mac48Address ("00:00:00:00:00:01")));

becomes

   ed->SetAddress (Mac48Address::ConvertFrom (Mac48Address ("06:60:b3:ac:2b:f5")))'

Save the changes and build

   d.  cd ..
   e.  ./waf

4. Set the hardware address of the interface in the client script on node [1,2]

   a. ifconfig

Locate the output for the device ath0 in the output of ifconfig

       ath0      Link encap:Ethernet  HWaddr 06:60:b3:b0:c6:a4
                 inet6 addr: fe80::460:b3ff:feb0:c6a4/64 Scope:Link
                 UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
                 RX packets:72 errors:0 dropped:0 overruns:0 frame:0
                 TX packets:851 errors:0 dropped:0 overruns:0 carrier:0
                 collisions:0 txqueuelen:0
                 RX bytes:1900 (1.8 KiB)  TX bytes:890770 (869.8 KiB)

Copy the HWaddr to the clipboard (in this case, 06:60:b3:b0:c6:a4)

   b.  cd examples
   c.  emacs emu-udp-echo-client.cc     # or use your favorite editor

Search for the MAC address assigmnet and replace the string with the HWaddr you just found, for example,

   ed->SetAddress (Mac48Address::ConvertFrom (Mac48Address ("00:00:00:00:00:01")));

becomes

   ed->SetAddress (Mac48Address::ConvertFrom (Mac48Address ("06:60:b3:b0:c6:a4")))'


Save the changes and build

   d.  cd ..
   e.  ./waf

In this simple example, we are just going to manually start one ns-3 simulation script to act as a server for a trivial UDP echo application. Once the server is started on [1,1] for example, you can then go to the console for [1,2] and run the UPD echo client script. Let's do it. Remember you don't have all day to dawdle after running the server -- it exits automatically after 60 seconds.

5. Run the server on [1,1]

   a.  ./waf --run emu-udp-echo-server

6. Run the client on [1,2]

   a.  ./waf --run emu-udp-echo-client

Congratulations, you have now run your ns-3 simulation scripts on a testbed. That was exciting, wasn't it.

You can now look at the trace files on the client [1,2] and server [1,1] nodes and see what you've done. For example, to look at the pcap traces on the client node:

7. Display the pcap trace on [1,2]

   a. cd ..
   b. tcpdump -nn -tt -r emu-udp-echo-client-0-0.pcap  | more

Craigdo 19:30, 14 July 2009 (UTC)