Difference between revisions of "Ns-3 on Visual Studio 2012"

From Nsnam
Jump to: navigation, search
(Changing the main program)
(How to build)
Line 9: Line 9:
 
After all the projects are loaded do the following:
 
After all the projects are loaded do the following:
 
* From the menu click "Build" --> "Build Solution"
 
* From the menu click "Build" --> "Build Solution"
 +
[[File:Build solution.png|framed|left|Click Build--> Build Solution]]
 +
 
If all goes we should see a build log similar to the below
 
If all goes we should see a build log similar to the below
 
<pre>
 
<pre>

Revision as of 13:04, 23 September 2013

How to download

The ns-3 package is available for download using mercurial using the command below

hg clone http://code.nsnam.org/jabraham3/ns-3-win2

How to build

Open the solution file "ns-3-win2/windows/ns-3-dev/ns-3-dev.sln" using Visual Studio 2012. After all the projects are loaded do the following:

  • From the menu click "Build" --> "Build Solution"
Click Build--> Build Solution

If all goes we should see a build log similar to the below

1>  main.vcxproj -> C:\ws\test\ns-3-win2\windows\ns-3-dev\Debug\main.exe
========== Build: 1 succeeded, 0 failed, 34 up-to-date, 0 skipped ==========

Running the main program

The "main" project is set as the "Startup" project. The "Startup" project contains the program with the 'main' function. The main project is set to run "third.cc". The executable can be run from the command-prompt by

C:\>cd windows\ns-3-dev\Debug
..Debug>main.exe

Changing the main program

To replace the default main program in the "main" project. Do the following:

  1. Select the "main" project
  2. Expand the "Source Files" filter
  3. Right-Click on the existing .cc file, which in a new installation is "third.cc" and select "Remove"
  4. Right-Click on "Source Files" --> "Add"
  5. In the popup-menu select "Existing Item" to add an existing source file or select "New Item" to create a new source file.
  6. At this point you can repeat the #How to build steps above to build the solution.

Adding a new module

Design of the solution