wifi-txop-aggregation.cc

Go to the documentation of this file.

/*
 * Copyright (c) 2016 Sébastien Deronne
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation;
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 * Author: Sébastien Deronne <sebastien.deronne@gmail.com>
 */
 
#include "ns3/boolean.h"
#include "ns3/command-line.h"
#include "ns3/config.h"
#include "ns3/internet-stack-helper.h"
#include "ns3/ipv4-address-helper.h"
#include "ns3/log.h"
#include "ns3/mobility-helper.h"
#include "ns3/packet-sink-helper.h"
#include "ns3/pointer.h"
#include "ns3/qos-txop.h"
#include "ns3/ssid.h"
#include "ns3/string.h"
#include "ns3/udp-client-server-helper.h"
#include "ns3/udp-server.h"
#include "ns3/uinteger.h"
#include "ns3/wifi-mac.h"
#include "ns3/wifi-net-device.h"
#include "ns3/yans-wifi-channel.h"
#include "ns3/yans-wifi-helper.h"
 
// This is an example that illustrates how 802.11n aggregation is configured.
// It defines 4 independent Wi-Fi networks (working on different channels).
// Each network contains one access point and one station. Each station
// continuously transmits data packets to its respective AP.
//
// Network topology (numbers in parentheses are channel numbers):
//
//  Network A (36)   Network B (40)   Network C (44)   Network D (48)
//   *      *          *      *         *      *          *      *
//   |      |          |      |         |      |          |      |
//  AP A   STA A      AP B   STA B     AP C   STA C      AP D   STA D
//
// The aggregation parameters are configured differently on the 4 stations:
// - station A uses default aggregation parameter values (A-MSDU disabled, A-MPDU enabled with
// maximum size of 65 kB);
// - station B doesn't use aggregation (both A-MPDU and A-MSDU are disabled);
// - station C enables A-MSDU (with maximum size of 8 kB) but disables A-MPDU;
// - station D uses two-level aggregation (A-MPDU with maximum size of 32 kB and A-MSDU with maximum
// size of 4 kB).
//
// The user can select the distance between the stations and the APs, can enable/disable the RTS/CTS
// mechanism and can modify the duration of a TXOP. Example: ./ns3 run "wifi-txop-aggregation
// --distance=10 --enableRts=0 --simulationTime=20"
//
// The output prints the throughput and the maximum TXOP duration measured for the 4 cases/networks
// described above. When default aggregation parameters are enabled, the
// maximum A-MPDU size is 65 kB and the throughput is maximal. When aggregation is disabled, the
// throughput is about the half of the physical bitrate. When only A-MSDU is enabled, the throughput
// is increased but is not maximal, since the maximum A-MSDU size is limited to 7935 bytes (whereas
// the maximum A-MPDU size is limited to 65535 bytes). When A-MSDU and A-MPDU are both enabled (=
// two-level aggregation), the throughput is slightly smaller than the first scenario since we set a
// smaller maximum A-MPDU size.
//
// When the distance is increased, the frame error rate gets higher, and the output shows how it
// affects the throughput for the 4 networks. Even through A-MSDU has less overheads than A-MPDU,
// A-MSDU is less robust against transmission errors than A-MPDU. When the distance is augmented,
// the throughput for the third scenario is more affected than the throughput obtained in other
// networks.
 
using namespace ns3;
 
NS_LOG_COMPONENT_DEFINE("TxopMpduAggregation");
 
/**
 * Keeps the maximum duration among all TXOPs
 */
struct TxopDurationTracer
{
    /**
     * Callback connected to TXOP duration trace source.
     *
     * \param startTime TXOP start time
     * \param duration TXOP duration
     * \param linkId the ID of the link
     */
    void Trace(Time startTime, Time duration, uint8_t linkId);
    Time m_max{Seconds(0)}; //!< maximum TXOP duration
};
 
void
TxopDurationTracer::Trace(Time startTime, Time duration, uint8_t linkId)
{
    if (duration > m_max)
    {
        m_max = duration;
    }
}
 
int
main(int argc, char* argv[])
{
    uint32_t payloadSize = 1472; // bytes
    double simulationTime = 10;  // seconds
    double txopLimit = 3520;     // microseconds
    double distance = 5;         // meters
    bool enableRts = false;
    bool enablePcap = false;
    bool verifyResults = false; // used for regression
 
    CommandLine cmd(__FILE__);
    cmd.AddValue("payloadSize", "Payload size in bytes", payloadSize);
    cmd.AddValue("enableRts", "Enable or disable RTS/CTS", enableRts);
    cmd.AddValue("txopLimit", "TXOP duration in microseconds", txopLimit);
    cmd.AddValue("simulationTime", "Simulation time in seconds", simulationTime);
    cmd.AddValue("distance",
                 "Distance in meters between the station and the access point",
                 distance);
    cmd.AddValue("enablePcap", "Enable/disable pcap file generation", enablePcap);
    cmd.AddValue("verifyResults",
                 "Enable/disable results verification at the end of the simulation",
                 verifyResults);
    cmd.Parse(argc, argv);
 
    Config::SetDefault("ns3::WifiRemoteStationManager::RtsCtsThreshold",
                       enableRts ? StringValue("0") : StringValue("999999"));
 
    NodeContainer wifiStaNodes;
    wifiStaNodes.Create(4);
    NodeContainer wifiApNodes;
    wifiApNodes.Create(4);
 
    YansWifiChannelHelper channel = YansWifiChannelHelper::Default();
    YansWifiPhyHelper phy;
    phy.SetPcapDataLinkType(WifiPhyHelper::DLT_IEEE802_11_RADIO);
    phy.SetChannel(channel.Create());
 
    WifiHelper wifi;
    wifi.SetStandard(WIFI_STANDARD_80211n);
    wifi.SetRemoteStationManager("ns3::ConstantRateWifiManager",
                                 "DataMode",
                                 StringValue("HtMcs7"),
                                 "ControlMode",
                                 StringValue("HtMcs0"));
    WifiMacHelper mac;
 
    NetDeviceContainer staDeviceA;
    NetDeviceContainer staDeviceB;
    NetDeviceContainer staDeviceC;
    NetDeviceContainer staDeviceD;
    NetDeviceContainer apDeviceA;
    NetDeviceContainer apDeviceB;
    NetDeviceContainer apDeviceC;
    NetDeviceContainer apDeviceD;
    Ssid ssid;
 
    // Network A
    ssid = Ssid("network-A");
    phy.Set("ChannelSettings", StringValue("{36, 0, BAND_5GHZ, 0}"));
    mac.SetType("ns3::StaWifiMac", "Ssid", SsidValue(ssid));
    staDeviceA = wifi.Install(phy, mac, wifiStaNodes.Get(0));
 
    mac.SetType("ns3::ApWifiMac",
                "Ssid",
                SsidValue(ssid),
                "EnableBeaconJitter",
                BooleanValue(false));
    apDeviceA = wifi.Install(phy, mac, wifiApNodes.Get(0));
 
    // Modify EDCA configuration (TXOP limit) for AC_BE
    Ptr<NetDevice> dev = wifiApNodes.Get(0)->GetDevice(0);
    Ptr<WifiNetDevice> wifi_dev = DynamicCast<WifiNetDevice>(dev);
    PointerValue ptr;
    Ptr<QosTxop> edca;
    wifi_dev->GetMac()->GetAttribute("BE_Txop", ptr);
    edca = ptr.Get<QosTxop>();
    edca->SetTxopLimit(MicroSeconds(txopLimit));
 
    // Trace TXOP duration for BE on AP A
    TxopDurationTracer netA;
    edca->TraceConnectWithoutContext("TxopTrace", MakeCallback(&TxopDurationTracer::Trace, &netA));
 
    // Network B
    ssid = Ssid("network-B");
    phy.Set("ChannelSettings", StringValue("{40, 0, BAND_5GHZ, 0}"));
    mac.SetType("ns3::StaWifiMac", "Ssid", SsidValue(ssid));
 
    staDeviceB = wifi.Install(phy, mac, wifiStaNodes.Get(1));
 
    // Disable A-MPDU
    dev = wifiStaNodes.Get(1)->GetDevice(0);
    wifi_dev = DynamicCast<WifiNetDevice>(dev);
    wifi_dev->GetMac()->SetAttribute("BE_MaxAmpduSize", UintegerValue(0));
 
    mac.SetType("ns3::ApWifiMac",
                "Ssid",
                SsidValue(ssid),
                "EnableBeaconJitter",
                BooleanValue(false));
    apDeviceB = wifi.Install(phy, mac, wifiApNodes.Get(1));
 
    // Disable A-MPDU
    dev = wifiApNodes.Get(1)->GetDevice(0);
    wifi_dev = DynamicCast<WifiNetDevice>(dev);
    wifi_dev->GetMac()->SetAttribute("BE_MaxAmpduSize", UintegerValue(0));
 
    // Modify EDCA configuration (TXOP limit) for AC_BE
    wifi_dev->GetMac()->GetAttribute("BE_Txop", ptr);
    edca = ptr.Get<QosTxop>();
    edca->SetTxopLimit(MicroSeconds(txopLimit));
 
    // Trace TXOP duration for BE on AP B
    TxopDurationTracer netB;
    edca->TraceConnectWithoutContext("TxopTrace", MakeCallback(&TxopDurationTracer::Trace, &netB));
 
    // Network C
    ssid = Ssid("network-C");
    phy.Set("ChannelSettings", StringValue("{44, 0, BAND_5GHZ, 0}"));
    mac.SetType("ns3::StaWifiMac", "Ssid", SsidValue(ssid));
 
    staDeviceC = wifi.Install(phy, mac, wifiStaNodes.Get(2));
 
    // Disable A-MPDU and enable A-MSDU with the highest maximum size allowed by the standard (7935
    // bytes)
    dev = wifiStaNodes.Get(2)->GetDevice(0);
    wifi_dev = DynamicCast<WifiNetDevice>(dev);
    wifi_dev->GetMac()->SetAttribute("BE_MaxAmpduSize", UintegerValue(0));
    wifi_dev->GetMac()->SetAttribute("BE_MaxAmsduSize", UintegerValue(7935));
 
    mac.SetType("ns3::ApWifiMac",
                "Ssid",
                SsidValue(ssid),
                "EnableBeaconJitter",
                BooleanValue(false));
    apDeviceC = wifi.Install(phy, mac, wifiApNodes.Get(2));
 
    // Disable A-MPDU and enable A-MSDU with the highest maximum size allowed by the standard (7935
    // bytes)
    dev = wifiApNodes.Get(2)->GetDevice(0);
    wifi_dev = DynamicCast<WifiNetDevice>(dev);
    wifi_dev->GetMac()->SetAttribute("BE_MaxAmpduSize", UintegerValue(0));
    wifi_dev->GetMac()->SetAttribute("BE_MaxAmsduSize", UintegerValue(7935));
 
    // Modify EDCA configuration (TXOP limit) for AC_BE
    wifi_dev->GetMac()->GetAttribute("BE_Txop", ptr);
    edca = ptr.Get<QosTxop>();
    edca->SetTxopLimit(MicroSeconds(txopLimit));
 
    // Trace TXOP duration for BE on AP C
    TxopDurationTracer netC;
    edca->TraceConnectWithoutContext("TxopTrace", MakeCallback(&TxopDurationTracer::Trace, &netC));
 
    // Network D
    ssid = Ssid("network-D");
    phy.Set("ChannelSettings", StringValue("{48, 0, BAND_5GHZ, 0}"));
    mac.SetType("ns3::StaWifiMac", "Ssid", SsidValue(ssid));
 
    staDeviceD = wifi.Install(phy, mac, wifiStaNodes.Get(3));
 
    // Enable A-MPDU with a smaller size than the default one and
    // enable A-MSDU with the smallest maximum size allowed by the standard (3839 bytes)
    dev = wifiStaNodes.Get(3)->GetDevice(0);
    wifi_dev = DynamicCast<WifiNetDevice>(dev);
    wifi_dev->GetMac()->SetAttribute("BE_MaxAmpduSize", UintegerValue(32768));
    wifi_dev->GetMac()->SetAttribute("BE_MaxAmsduSize", UintegerValue(3839));
 
    mac.SetType("ns3::ApWifiMac",
                "Ssid",
                SsidValue(ssid),
                "EnableBeaconJitter",
                BooleanValue(false));
    apDeviceD = wifi.Install(phy, mac, wifiApNodes.Get(3));
 
    // Enable A-MPDU with a smaller size than the default one and
    // enable A-MSDU with the smallest maximum size allowed by the standard (3839 bytes)
    dev = wifiApNodes.Get(3)->GetDevice(0);
    wifi_dev = DynamicCast<WifiNetDevice>(dev);
    wifi_dev->GetMac()->SetAttribute("BE_MaxAmpduSize", UintegerValue(32768));
    wifi_dev->GetMac()->SetAttribute("BE_MaxAmsduSize", UintegerValue(3839));
 
    // Modify EDCA configuration (TXOP limit) for AC_BE
    wifi_dev->GetMac()->GetAttribute("BE_Txop", ptr);
    edca = ptr.Get<QosTxop>();
    edca->SetTxopLimit(MicroSeconds(txopLimit));
 
    // Trace TXOP duration for BE on AP D
    TxopDurationTracer netD;
    edca->TraceConnectWithoutContext("TxopTrace", MakeCallback(&TxopDurationTracer::Trace, &netD));
 
    // Setting mobility model
    MobilityHelper mobility;
    Ptr<ListPositionAllocator> positionAlloc = CreateObject<ListPositionAllocator>();
    mobility.SetMobilityModel("ns3::ConstantPositionMobilityModel");
 
    // Set position for APs
    positionAlloc->Add(Vector(0.0, 0.0, 0.0));
    positionAlloc->Add(Vector(10.0, 0.0, 0.0));
    positionAlloc->Add(Vector(20.0, 0.0, 0.0));
    positionAlloc->Add(Vector(30.0, 0.0, 0.0));
    // Set position for STAs
    positionAlloc->Add(Vector(distance, 0.0, 0.0));
    positionAlloc->Add(Vector(10 + distance, 0.0, 0.0));
    positionAlloc->Add(Vector(20 + distance, 0.0, 0.0));
    positionAlloc->Add(Vector(30 + distance, 0.0, 0.0));
 
    mobility.SetPositionAllocator(positionAlloc);
    mobility.Install(wifiApNodes);
    mobility.Install(wifiStaNodes);
 
    // Internet stack
    InternetStackHelper stack;
    stack.Install(wifiApNodes);
    stack.Install(wifiStaNodes);
 
    Ipv4AddressHelper address;
    address.SetBase("192.168.1.0", "255.255.255.0");
    Ipv4InterfaceContainer StaInterfaceA;
    StaInterfaceA = address.Assign(staDeviceA);
    Ipv4InterfaceContainer ApInterfaceA;
    ApInterfaceA = address.Assign(apDeviceA);
 
    address.SetBase("192.168.2.0", "255.255.255.0");
    Ipv4InterfaceContainer StaInterfaceB;
    StaInterfaceB = address.Assign(staDeviceB);
    Ipv4InterfaceContainer ApInterfaceB;
    ApInterfaceB = address.Assign(apDeviceB);
 
    address.SetBase("192.168.3.0", "255.255.255.0");
    Ipv4InterfaceContainer StaInterfaceC;
    StaInterfaceC = address.Assign(staDeviceC);
    Ipv4InterfaceContainer ApInterfaceC;
    ApInterfaceC = address.Assign(apDeviceC);
 
    address.SetBase("192.168.4.0", "255.255.255.0");
    Ipv4InterfaceContainer StaInterfaceD;
    StaInterfaceD = address.Assign(staDeviceD);
    Ipv4InterfaceContainer ApInterfaceD;
    ApInterfaceD = address.Assign(apDeviceD);
 
    // Setting applications
    uint16_t port = 9;
    UdpServerHelper serverA(port);
    ApplicationContainer serverAppA = serverA.Install(wifiStaNodes.Get(0));
    serverAppA.Start(Seconds(0.0));
    serverAppA.Stop(Seconds(simulationTime + 1));
 
    UdpClientHelper clientA(StaInterfaceA.GetAddress(0), port);
    clientA.SetAttribute("MaxPackets", UintegerValue(4294967295U));
    clientA.SetAttribute("Interval", TimeValue(Time("0.0001"))); // packets/s
    clientA.SetAttribute("PacketSize", UintegerValue(payloadSize));
 
    ApplicationContainer clientAppA = clientA.Install(wifiApNodes.Get(0));
    clientAppA.Start(Seconds(1.0));
    clientAppA.Stop(Seconds(simulationTime + 1));
 
    UdpServerHelper serverB(port);
    ApplicationContainer serverAppB = serverB.Install(wifiStaNodes.Get(1));
    serverAppB.Start(Seconds(0.0));
    serverAppB.Stop(Seconds(simulationTime + 1));
 
    UdpClientHelper clientB(StaInterfaceB.GetAddress(0), port);
    clientB.SetAttribute("MaxPackets", UintegerValue(4294967295U));
    clientB.SetAttribute("Interval", TimeValue(Time("0.0001"))); // packets/s
    clientB.SetAttribute("PacketSize", UintegerValue(payloadSize));
 
    ApplicationContainer clientAppB = clientB.Install(wifiApNodes.Get(1));
    clientAppB.Start(Seconds(1.0));
    clientAppB.Stop(Seconds(simulationTime + 1));
 
    UdpServerHelper serverC(port);
    ApplicationContainer serverAppC = serverC.Install(wifiStaNodes.Get(2));
    serverAppC.Start(Seconds(0.0));
    serverAppC.Stop(Seconds(simulationTime + 1));
 
    UdpClientHelper clientC(StaInterfaceC.GetAddress(0), port);
    clientC.SetAttribute("MaxPackets", UintegerValue(4294967295U));
    clientC.SetAttribute("Interval", TimeValue(Time("0.0001"))); // packets/s
    clientC.SetAttribute("PacketSize", UintegerValue(payloadSize));
 
    ApplicationContainer clientAppC = clientC.Install(wifiApNodes.Get(2));
    clientAppC.Start(Seconds(1.0));
    clientAppC.Stop(Seconds(simulationTime + 1));
 
    UdpServerHelper serverD(port);
    ApplicationContainer serverAppD = serverD.Install(wifiStaNodes.Get(3));
    serverAppD.Start(Seconds(0.0));
    serverAppD.Stop(Seconds(simulationTime + 1));
 
    UdpClientHelper clientD(StaInterfaceD.GetAddress(0), port);
    clientD.SetAttribute("MaxPackets", UintegerValue(4294967295U));
    clientD.SetAttribute("Interval", TimeValue(Time("0.0001"))); // packets/s
    clientD.SetAttribute("PacketSize", UintegerValue(payloadSize));
 
    ApplicationContainer clientAppD = clientD.Install(wifiApNodes.Get(3));
    clientAppD.Start(Seconds(1.0));
    clientAppD.Stop(Seconds(simulationTime + 1));
 
    if (enablePcap)
    {
        phy.EnablePcap("AP_A", apDeviceA.Get(0));
        phy.EnablePcap("STA_A", staDeviceA.Get(0));
        phy.EnablePcap("AP_B", apDeviceB.Get(0));
        phy.EnablePcap("STA_B", staDeviceB.Get(0));
        phy.EnablePcap("AP_C", apDeviceC.Get(0));
        phy.EnablePcap("STA_C", staDeviceC.Get(0));
        phy.EnablePcap("AP_D", apDeviceD.Get(0));
        phy.EnablePcap("STA_D", staDeviceD.Get(0));
    }
 
    Simulator::Stop(Seconds(simulationTime + 1));
    Simulator::Run();
 
    // Show results
    uint64_t totalPacketsThroughA = DynamicCast<UdpServer>(serverAppA.Get(0))->GetReceived();
    uint64_t totalPacketsThroughB = DynamicCast<UdpServer>(serverAppB.Get(0))->GetReceived();
    uint64_t totalPacketsThroughC = DynamicCast<UdpServer>(serverAppC.Get(0))->GetReceived();
    uint64_t totalPacketsThroughD = DynamicCast<UdpServer>(serverAppD.Get(0))->GetReceived();
 
    Simulator::Destroy();
 
    double throughput = totalPacketsThroughA * payloadSize * 8 / (simulationTime * 1000000.0);
    std::cout << "Default configuration (A-MPDU aggregation enabled, 65kB): " << '\n'
              << "  Throughput = " << throughput << " Mbit/s" << '\n';
    if (verifyResults && (throughput < 57.5 || throughput > 58.5))
    {
        NS_LOG_ERROR("Obtained throughput " << throughput << " is not in the expected boundaries!");
        exit(1);
    }
    if (txopLimit)
    {
        std::cout << "  Maximum TXOP duration (TXOP limit = " << txopLimit
                  << "us): " << netA.m_max.GetMicroSeconds() << " us" << '\n';
        if (verifyResults && txopLimit &&
            (netA.m_max < MicroSeconds(3350) || netA.m_max > MicroSeconds(3520)))
        {
            NS_LOG_ERROR("Maximum TXOP duration " << netA.m_max
                                                  << " is not in the expected boundaries!");
            exit(1);
        }
    }
 
    throughput = totalPacketsThroughB * payloadSize * 8 / (simulationTime * 1000000.0);
    std::cout << "Aggregation disabled: " << '\n'
              << "  Throughput = " << throughput << " Mbit/s" << '\n';
    if (verifyResults && (throughput < 38 || throughput > 39))
    {
        NS_LOG_ERROR("Obtained throughput " << throughput << " is not in the expected boundaries!");
        exit(1);
    }
    if (txopLimit)
    {
        std::cout << "  Maximum TXOP duration (TXOP limit = " << txopLimit
                  << "us): " << netB.m_max.GetMicroSeconds() << " us" << '\n';
        if (verifyResults && (netB.m_max < MicroSeconds(3350) || netB.m_max > MicroSeconds(3520)))
        {
            NS_LOG_ERROR("Maximum TXOP duration " << netB.m_max
                                                  << " is not in the expected boundaries!");
            exit(1);
        }
    }
 
    throughput = totalPacketsThroughC * payloadSize * 8 / (simulationTime * 1000000.0);
    std::cout << "A-MPDU disabled and A-MSDU enabled (8kB): " << '\n'
              << "  Throughput = " << throughput << " Mbit/s" << '\n';
    if (verifyResults && (throughput < 52 || throughput > 53))
    {
        NS_LOG_ERROR("Obtained throughput " << throughput << " is not in the expected boundaries!");
        exit(1);
    }
    if (txopLimit)
    {
        std::cout << "  Maximum TXOP duration (TXOP limit = " << txopLimit
                  << "us): " << netC.m_max.GetMicroSeconds() << " us" << '\n';
        if (verifyResults && (netC.m_max < MicroSeconds(3350) || netC.m_max > MicroSeconds(3520)))
        {
            NS_LOG_ERROR("Maximum TXOP duration " << netC.m_max
                                                  << " is not in the expected boundaries!");
            exit(1);
        }
    }
 
    throughput = totalPacketsThroughD * payloadSize * 8 / (simulationTime * 1000000.0);
    std::cout << "A-MPDU enabled (32kB) and A-MSDU enabled (4kB): " << '\n'
              << "  Throughput = " << throughput << " Mbit/s" << '\n';
    if (verifyResults && (throughput < 58 || throughput > 59))
    {
        NS_LOG_ERROR("Obtained throughput " << throughput << " is not in the expected boundaries!");
        exit(1);
    }
    if (txopLimit)
    {
        std::cout << "  Maximum TXOP duration (TXOP limit = " << txopLimit
                  << "us): " << netD.m_max.GetMicroSeconds() << " us" << '\n';
        if (verifyResults && txopLimit &&
            (netD.m_max < MicroSeconds(3350) || netD.m_max > MicroSeconds(3520)))
        {
            NS_LOG_ERROR("Maximum TXOP duration " << netD.m_max
                                                  << " is not in the expected boundaries!");
            exit(1);
        }
    }
 
    return 0;
}