The list of all trace sources.
[Core]
Collaboration diagram for The list of all trace sources.:
|
- Enqueue: Enqueue trace
- Dequeue: Dequeue trace
- Drop: Drop trace
- TxStart: Trace fired when a new transmission is started
- TxEnd: Trace fired when a previosuly started transmission is finished
- RxStart: Trace fired when the start of a signal is detected
- RxAbort: Trace fired when a previously started RX is aborted before time
- RxEndOk: Trace fired when a previosuly started RX terminates successfully
- RxEndError: Trace fired when a previosuly started RX terminates with an error (packet is corrupted)
- Enqueue: Enqueue trace
- Dequeue: Dequeue trace
- Drop: Drop trace
- Rx: Receive trace
- Tx: Transmit trace
- PhyTxBegin: Trace source indicating a packet has begun transmitting over the channel medium
- PhyTxEnd: Trace source indicating a packet has been completely transmitted over the channel
- PhyTxDrop: Trace source indicating a packet has been dropped by the device during transmission
- PhyRxBegin: Trace source indicating a packet has begun being received from the channel medium by the device
- PhyRxEnd: Trace source indicating a packet has been completely received from the channel medium by the device
- PhyRxDrop: Trace source indicating a packet has been dropped by the device during reception
ns3::SubscriberStationNetDevice
- SSTxDrop: A packet has been dropped in the MAC layer before being queued for transmission.
- SSPromiscRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a promiscuous trace,
- SSRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a non-promiscuous trace,
- SSRxDrop: A packet has been dropped in the MAC layer after it has been passed up from the physical layer.
- Rx: Receive trace
- Tx: Transmit trace
- BSTx: A packet has been received from higher layers and is being processed in preparation for queueing for transmission.
- BSTxDrop: A packet has been dropped in the MAC layer before being queued for transmission.
- BSPromiscRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a promiscuous trace,
- BSRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a non-promiscuous trace,
- BSRxDrop: A packet has been dropped in the MAC layer after it has been passed up from the physical layer.
- RouteDiscoveryTime: The time of route discovery procedure
ns3::dot11s::PeerManagementProtocol
- LinkOpen: New peer link opened
- LinkClose: New peer link closed
- TxOkHeader: The header of successfully transmitted packet
- TxErrHeader: The header of unsuccessfully transmitted packet
- MacTx: A packet has been received from higher layers and is being processed in preparation for queueing for transmission.
- MacTxDrop: A packet has been dropped in the MAC layer before being queued for transmission.
- MacPromiscRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a promiscuous trace,
- MacRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a non-promiscuous trace,
- MacRxDrop: A packet has been dropped in the MAC layer after it has been passed up from the physical layer.
- TotalEnergyConsumption: Total energy consumption of the modem device.
- RX: A packet was destined for and received at this MAC layer
- Cycle: Trace cycle statistics
- Enqueue: A (data) packet arrived at MAC for transmission
- Dequeue: A (data) packet was passed down to PHY from MAC
- RX: A packet was destined for and received at this MAC layer
- RxOk: A packet was received successfully
- RxError: A packet was received unsuccessfully
- Tx: Packet transmission beginning
- Enqueue: A packet arrived at the MAC for transmission
- Dequeue: A was passed down to the PHY from the MAC
- RX: A packet was destined for this MAC and was received
- Rx: Received payload from the MAC layer.
- Tx: Send payload to the MAC layer.
- RxOk: A packet was received successfully
- RxError: A packet was received unsuccessfully
- Tx: Packet transmission beginning
- TotalEnergyConsumption: Total energy consumption of the radio device.
- RvBatteryModelBatteryLevel: RV battery model battery level.
- RvBatteryModelBatteryLifetime: RV battery model battery lifetime.
- RemainingEnergy: Remaining energy at BasicEnergySource.
- RemainingEnergy: Remaining energy at BasicEnergySource.
- TotalEnergyConsumption: Total energy consumption of the radio device.
- Rtt: The rtt calculated by the ping.
- TxStart: Trace fired when a new transmission is started
- TxEnd: Trace fired when a previosuly started transmission is finished
- RxStart: Trace fired when the start of a signal is detected
- RxAbort: Trace fired when a previously started RX is aborted before time
- RxEndOk: Trace fired when a previosuly started RX terminates successfully
- RxEndError: Trace fired when a previosuly started RX terminates with an error (packet is corrupted)
- MacTx: Trace source indicating a packet has arrived for transmission by this device
- MacTxDrop: Trace source indicating a packet has been dropped by the device before transmission
- MacPromiscRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a promiscuous trace,
- MacRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a non-promiscuous trace,
- AveragePowerSpectralDensityReport: Trace fired whenever a new value for the average Power Spectral Density is calculated
- TxStart: Trace fired when a new transmission is started
- TxEnd: Trace fired when a previosuly started transmission is finished
- MacTxRtsFailed: The transmission of a RTS by the MAC layer has failed
- MacTxDataFailed: The transmission of a data packet by the MAC layer has failed
- MacTxFinalRtsFailed: The transmission of a RTS has exceeded the maximum number of attempts
- MacTxFinalDataFailed: The transmission of a data packet has exceeded the maximum number of attempts
- Assoc: Associated with an access point.
- DeAssoc: Association with an access point lost.
- PhyTxBegin: Trace source indicating a packet has begun transmitting over the channel medium
- PhyTxEnd: Trace source indicating a packet has been completely transmitted over the channel. NOTE: the only official WifiPhy implementation available to this date (YansWifiPhy) never fires this trace source.
- PhyTxDrop: Trace source indicating a packet has been dropped by the device during transmission
- PhyRxBegin: Trace source indicating a packet has begun being received from the channel medium by the device
- PhyRxEnd: Trace source indicating a packet has been completely received from the channel medium by the device
- PhyRxDrop: Trace source indicating a packet has been dropped by the device during reception
- PromiscSnifferRx: Trace source simulating a wifi device in monitor mode sniffing all received frames
- PromiscSnifferTx: Trace source simulating the capability of a wifi device in monitor mode to sniff all frames being transmitted
- State: The state of the PHY layer
- RxOk: A packet has been received successfully.
- RxError: A packet has been received unsuccessfully.
- Tx: Packet transmission is starting.
- Rx: Receive OLSR packet.
- Tx: Send OLSR packet.
- RoutingTableChanged: The OLSR routing table has changed.
- Tx: A new packet is created and is sent
- Tx: A new packet is created and is sent
- Rx: A packet has been received
- Tx: A new packet is created and is sent
- MacTx: Trace source indicating a packet has arrived for transmission by this device
- MacPromiscRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a promiscuous trace,
- MacRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a non-promiscuous trace,
- Sniffer: Trace source simulating a non-promiscuous packet sniffer attached to the device
- PromiscSniffer: Trace source simulating a promiscuous packet sniffer attached to the device
- MacTx: Trace source indicating a packet has arrived for transmission by this device
- MacTxDrop: Trace source indicating a packet has been dropped by the device before transmission
- MacPromiscRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a promiscuous trace,
- MacRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a non-promiscuous trace,
- Sniffer: Trace source simulating a non-promiscuous packet sniffer attached to the device
- PromiscSniffer: Trace source simulating a promiscuous packet sniffer attached to the device
- MacTx: Trace source indicating a packet has arrived for transmission by this device
- MacTxDrop: Trace source indicating a packet has been dropped by the device before transmission
- MacPromiscRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a promiscuous trace,
- MacRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a non-promiscuous trace,
- MacTxBackoff: Trace source indicating a packet has been delayed by the CSMA backoff process
- PhyTxBegin: Trace source indicating a packet has begun transmitting over the channel
- PhyTxEnd: Trace source indicating a packet has been completely transmitted over the channel
- PhyTxDrop: Trace source indicating a packet has been dropped by the device during transmission
- PhyRxEnd: Trace source indicating a packet has been completely received by the device
- PhyRxDrop: Trace source indicating a packet has been dropped by the device during reception
- Sniffer: Trace source simulating a non-promiscuous packet sniffer attached to the device
- PromiscSniffer: Trace source simulating a promiscuous packet sniffer attached to the device
- TxRxPointToPoint: Trace source indicating transmission of packet from the PointToPointChannel, used by the Animation interface.
- MacTx: Trace source indicating a packet has arrived for transmission by this device
- MacTxDrop: Trace source indicating a packet has been dropped by the device before transmission
- MacPromiscRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a promiscuous trace,
- MacRx: A packet has been received by this device, has been passed up from the physical layer and is being forwarded up the local protocol stack. This is a non-promiscuous trace,
- PhyTxBegin: Trace source indicating a packet has begun transmitting over the channel
- PhyTxEnd: Trace source indicating a packet has been completely transmitted over the channel
- PhyTxDrop: Trace source indicating a packet has been dropped by the device during transmission
- PhyRxEnd: Trace source indicating a packet has been completely received by the device
- PhyRxDrop: Trace source indicating a packet has been dropped by the device during reception
- Sniffer: Trace source simulating a non-promiscuous packet sniffer attached to the device
- PromiscSniffer: Trace source simulating a promiscuous packet sniffer attached to the device
- CongestionWindow: The TCP connection's congestion window
- RTO: Retransmission timeout
- RTT: Last RTT sample
- NextTxSequence: Next sequence number to send (SND.NXT)
- HighestSequence: Highest sequence number ever sent in socket's life time
- State: TCP state
- RWND: Remote side's flow control window
- CongestionWindow: The TCP connection's congestion window
- CongestionWindow: The TCP connection's congestion window
- Drop: Drop ipv6 packet
- Tx: Send IPv6 packet to outgoing interface.
- Rx: Receive IPv6 packet from incoming interface.
- Drop: Drop IPv6 packet
- Drop: Packet dropped because not enough room in pending queue for a specific cache entry.
- Drop: Packet dropped due to ArpCache entry in WaitReply expiring.
- Tx: Send ipv4 packet to outgoing interface.
- Rx: Receive ipv4 packet from incoming interface.
- Drop: Drop ipv4 packet
- SendOutgoing: A newly-generated packet by this node is about to be queued for transmission
- UnicastForward: A unicast IPv4 packet was received by this node and is being forwarded to another node
- LocalDeliver: An IPv4 packet was received by/for this node, and it is being forward up the stack
- PhyRxDrop: Trace source indicating a packet has been dropped by the device during reception
- Drop: Drop packet due to receive buffer overflow
- Enqueue: Enqueue a packet in the queue.
- Dequeue: Dequeue a packet from the queue.
- Drop: Drop a packet stored in the queue.
- CourseChange: The value of the position and/or velocity vector changed
- Drop: Drop UDP packet due to receive buffer overflow
