wifi-clear-channel-cmu.cc

Go to the documentation of this file.

/*
 * Copyright (c) 2009 The Boeing Company
 *
 * SPDX-License-Identifier: GPL-2.0-only
 *
 * Author: Guangyu Pei <guangyu.pei@boeing.com>
 */
 
#include "ns3/command-line.h"
#include "ns3/config.h"
#include "ns3/double.h"
#include "ns3/gnuplot.h"
#include "ns3/internet-stack-helper.h"
#include "ns3/ipv4-address-helper.h"
#include "ns3/log.h"
#include "ns3/mobility-helper.h"
#include "ns3/mobility-model.h"
#include "ns3/string.h"
#include "ns3/yans-wifi-channel.h"
#include "ns3/yans-wifi-helper.h"
 
using namespace ns3;
 
NS_LOG_COMPONENT_DEFINE("ClearChannelCmu");
 
/**
 * WiFi clear channel cmu experiment class.
 *
 * It handles the creation and run of an experiment.
 */
class Experiment
{
  public:
    Experiment();
    /**
     * Constructor.
     * @param name The name of the experiment.
     */
    Experiment(std::string name);
    /**
     * Run an experiment.
     * @param wifi      //!< The WifiHelper class.
     * @param wifiPhy   //!< The YansWifiPhyHelper class.
     * @param wifiMac   //!< The WifiMacHelper class.
     * @param wifiChannel //!< The YansWifiChannelHelper class.
     * @return the number of received packets.
     */
    uint32_t Run(const WifiHelper& wifi,
                 const YansWifiPhyHelper& wifiPhy,
                 const WifiMacHelper& wifiMac,
                 const YansWifiChannelHelper& wifiChannel);
 
  private:
    /**
     * Receive a packet.
     * @param socket The receiving socket.
     */
    void ReceivePacket(Ptr<Socket> socket);
    /**
     * Set the position of a node.
     * @param node The node.
     * @param position The position of the node.
     */
    void SetPosition(Ptr<Node> node, Vector position);
    /**
     * Get the position of a node.
     * @param node The node.
     * @return the position of the node.
     */
    Vector GetPosition(Ptr<Node> node);
    /**
     * Setup the receiving socket.
     * @param node The receiving node.
     * @return the socket.
     */
    Ptr<Socket> SetupPacketReceive(Ptr<Node> node);
    /**
     * Generate the traffic.
     * @param socket The sending socket.
     * @param pktSize The packet size.
     * @param pktCount The number of packets to send.
     * @param pktInterval The time between packets.
     */
    void GenerateTraffic(Ptr<Socket> socket, uint32_t pktSize, uint32_t pktCount, Time pktInterval);
 
    uint32_t m_pktsTotal;      //!< Total number of received packets
    Gnuplot2dDataset m_output; //!< Output dataset.
};
 
Experiment::Experiment()
{
}
 
Experiment::Experiment(std::string name)
    : m_output(name)
{
    m_output.SetStyle(Gnuplot2dDataset::LINES);
}
 
void
Experiment::SetPosition(Ptr<Node> node, Vector position)
{
    Ptr<MobilityModel> mobility = node->GetObject<MobilityModel>();
    mobility->SetPosition(position);
}
 
Vector
Experiment::GetPosition(Ptr<Node> node)
{
    Ptr<MobilityModel> mobility = node->GetObject<MobilityModel>();
    return mobility->GetPosition();
}
 
void
Experiment::ReceivePacket(Ptr<Socket> socket)
{
    Ptr<Packet> packet;
    while ((packet = socket->Recv()))
    {
        m_pktsTotal++;
    }
}
 
Ptr<Socket>
Experiment::SetupPacketReceive(Ptr<Node> node)
{
    TypeId tid = TypeId::LookupByName("ns3::UdpSocketFactory");
    Ptr<Socket> sink = Socket::CreateSocket(node, tid);
    InetSocketAddress local = InetSocketAddress(Ipv4Address::GetAny(), 80);
    sink->Bind(local);
    sink->SetRecvCallback(MakeCallback(&Experiment::ReceivePacket, this));
    return sink;
}
 
void
Experiment::GenerateTraffic(Ptr<Socket> socket,
                            uint32_t pktSize,
                            uint32_t pktCount,
                            Time pktInterval)
{
    if (pktCount > 0)
    {
        socket->Send(Create<Packet>(pktSize));
        Simulator::Schedule(pktInterval,
                            &Experiment::GenerateTraffic,
                            this,
                            socket,
                            pktSize,
                            pktCount - 1,
                            pktInterval);
    }
    else
    {
        socket->Close();
    }
}
 
uint32_t
Experiment::Run(const WifiHelper& wifi,
                const YansWifiPhyHelper& wifiPhy,
                const WifiMacHelper& wifiMac,
                const YansWifiChannelHelper& wifiChannel)
{
    m_pktsTotal = 0;
 
    NodeContainer c;
    c.Create(2);
 
    InternetStackHelper internet;
    internet.Install(c);
 
    YansWifiPhyHelper phy = wifiPhy;
    phy.SetChannel(wifiChannel.Create());
 
    NetDeviceContainer devices = wifi.Install(phy, wifiMac, c);
 
    MobilityHelper mobility;
    Ptr<ListPositionAllocator> positionAlloc = CreateObject<ListPositionAllocator>();
    positionAlloc->Add(Vector(0.0, 0.0, 0.0));
    positionAlloc->Add(Vector(5.0, 0.0, 0.0));
    mobility.SetPositionAllocator(positionAlloc);
    mobility.SetMobilityModel("ns3::ConstantPositionMobilityModel");
    mobility.Install(c);
 
    Ipv4AddressHelper ipv4;
    NS_LOG_INFO("Assign IP Addresses.");
    ipv4.SetBase("10.1.1.0", "255.255.255.0");
    Ipv4InterfaceContainer i = ipv4.Assign(devices);
 
    Ptr<Socket> recvSink = SetupPacketReceive(c.Get(0));
 
    TypeId tid = TypeId::LookupByName("ns3::UdpSocketFactory");
    Ptr<Socket> source = Socket::CreateSocket(c.Get(1), tid);
    InetSocketAddress remote = InetSocketAddress(Ipv4Address("255.255.255.255"), 80);
    source->SetAllowBroadcast(true);
    source->Connect(remote);
    uint32_t packetSize = 1014;
    uint32_t maxPacketCount = 200;
    Time interPacketInterval = Seconds(1.);
    Simulator::Schedule(Seconds(1),
                        &Experiment::GenerateTraffic,
                        this,
                        source,
                        packetSize,
                        maxPacketCount,
                        interPacketInterval);
    Simulator::Run();
 
    Simulator::Destroy();
 
    return m_pktsTotal;
}
 
int
main(int argc, char* argv[])
{
    std::ofstream outfile("clear-channel.plt");
 
    const std::vector<std::string> modes{
        "DsssRate1Mbps",
        "DsssRate2Mbps",
        "DsssRate5_5Mbps",
        "DsssRate11Mbps",
    };
 
    CommandLine cmd(__FILE__);
    cmd.Parse(argc, argv);
 
    Gnuplot gnuplot = Gnuplot("clear-channel.eps");
 
    for (uint32_t i = 0; i < modes.size(); i++)
    {
        std::cout << modes[i] << std::endl;
        Gnuplot2dDataset dataset(modes[i]);
 
        for (double rss = -102.0; rss <= -80.0; rss += 0.5)
        {
            Experiment experiment;
            dataset.SetStyle(Gnuplot2dDataset::LINES);
 
            WifiHelper wifi;
            wifi.SetStandard(WIFI_STANDARD_80211b);
            WifiMacHelper wifiMac;
            Config::SetDefault("ns3::WifiRemoteStationManager::NonUnicastMode",
                               StringValue(modes[i]));
            wifi.SetRemoteStationManager("ns3::ConstantRateWifiManager",
                                         "DataMode",
                                         StringValue(modes[i]),
                                         "ControlMode",
                                         StringValue(modes[i]));
            wifiMac.SetType("ns3::AdhocWifiMac");
 
            YansWifiPhyHelper wifiPhy;
            YansWifiChannelHelper wifiChannel;
            wifiChannel.SetPropagationDelay("ns3::ConstantSpeedPropagationDelayModel");
            wifiChannel.AddPropagationLoss("ns3::FixedRssLossModel", "Rss", DoubleValue(rss));
 
            NS_LOG_DEBUG(modes[i]);
            experiment = Experiment(modes[i]);
            wifiPhy.Set("TxPowerStart", DoubleValue(15.0));
            wifiPhy.Set("TxPowerEnd", DoubleValue(15.0));
            wifiPhy.Set("RxGain", DoubleValue(0));
            wifiPhy.Set("RxNoiseFigure", DoubleValue(7));
            uint32_t pktsRecvd = experiment.Run(wifi, wifiPhy, wifiMac, wifiChannel);
            dataset.Add(rss, pktsRecvd);
        }
 
        gnuplot.AddDataset(dataset);
    }
    gnuplot.SetTerminal("postscript eps color enh \"Times-BoldItalic\"");
    gnuplot.SetLegend("RSS(dBm)", "Number of packets received");
    gnuplot.SetExtra("set xrange [-102:-83]");
    gnuplot.GenerateOutput(outfile);
    outfile.close();
 
    return 0;
}