25 #include <ns3/core-module.h>
26 #include <ns3/network-module.h>
27 #include <ns3/spectrum-model-ism2400MHz-res1MHz.h>
28 #include <ns3/spectrum-model-300kHz-300GHz-log.h>
29 #include <ns3/wifi-spectrum-value-helper.h>
30 #include <ns3/single-model-spectrum-channel.h>
31 #include <ns3/waveform-generator.h>
32 #include <ns3/spectrum-analyzer.h>
35 #include <ns3/friis-spectrum-propagation-loss.h>
36 #include <ns3/propagation-delay-model.h>
37 #include <ns3/mobility-module.h>
38 #include <ns3/spectrum-helper.h>
39 #include <ns3/applications-module.h>
40 #include <ns3/adhoc-aloha-noack-ideal-phy-helper.h>
53 std::cout << context <<
" PHY TX START p: " << p << std::endl;
63 std::cout << context <<
" PHY TX END p: " << p << std::endl;
72 std::cout << context <<
" PHY RX START p:" << p << std::endl;
81 std::cout << context <<
" PHY RX END OK p:" << p << std::endl;
90 std::cout << context <<
" PHY RX END ERROR p:" << p << std::endl;
100 while ((packet = socket->
Recv ()))
106 std::cout <<
"SOCKET received " << bytes <<
" bytes" << std::endl;
120 int main (
int argc,
char** argv)
124 cmd.
Parse (argc, argv);
131 positionAlloc->
Add (
Vector (0.0, 0.0, 0.0));
132 positionAlloc->
Add (
Vector (5.0, 0.0, 0.0));
144 double txPower = 0.1;
145 uint32_t channelNumber = 1;
150 const double k = 1.381e-23;
151 const double T = 290;
152 double noisePsdValue = k * T;
175 apps.
Start (Seconds (0.1));
176 apps.
Stop (Seconds (0.104));
holds a vector of ns3::Application pointers.
void SetTxPowerSpectralDensity(Ptr< SpectrumValue > txPsd)
Ptr< NetDevice > Get(uint32_t i) const
Get the Ptr<NetDevice> stored in this container at a given index.
create the AlohaNoackNetDevice
void PhyRxEndOkTrace(std::string context, Ptr< const Packet > p)
void SetPhyAttribute(std::string name, const AttributeValue &v)
an address for a packet socket
void ReceivePacket(Ptr< Socket > socket)
static void Run(void)
Run the simulation until one of:
#define NS_LOG_COMPONENT_DEFINE(name)
Ptr< SpectrumChannel > Create(void) const
uint32_t GetSize(void) const
void PhyRxStartTrace(std::string context, Ptr< const Packet > p)
void Connect(std::string path, const CallbackBase &cb)
A helper to make it easier to instantiate an ns3::OnOffApplication on a set of nodes.
Give ns3::PacketSocket powers to ns3::Node.
void SetSingleDevice(uint32_t device)
a polymophic address class
Class for representing data rates.
void PhyTxStartTrace(std::string context, Ptr< const Packet > p)
virtual Ptr< SpectrumValue > CreateTxPowerSpectralDensity(double txPower, uint32_t channel)
void Install(Ptr< Node > node) const
"Layout" a single node according to the current position allocator type.
Hold an unsigned integer type.
holds a vector of ns3::NetDevice pointers
void PhyRxEndErrorTrace(std::string context, Ptr< const Packet > p)
Callback< R > MakeCallback(R(T::*memPtr)(void), OBJ objPtr)
void SetRecvCallback(Callback< void, Ptr< Socket > >)
Notify application when new data is available to be read.
static Ptr< Socket > CreateSocket(Ptr< Node > node, TypeId tid)
This method wraps the creation of sockets that is performed on a given node by a SocketFactory specif...
void Start(Time start)
Arrange for all of the Applications in this container to Start() at the Time given as a parameter...
Parse command-line arguments.
static void Destroy(void)
Every event scheduled by the Simulator::insertAtDestroy method is invoked.
Ptr< Socket > SetupPacketReceive(Ptr< Node > node)
virtual int Bind(const Address &address)=0
Allocate a local endpoint for this socket.
void SetConstantRate(DataRate dataRate, uint32_t packetSize=512)
Helper function to set a constant rate source.
void SetPhysicalAddress(const Address address)
keep track of a set of node pointers.
virtual Ptr< SpectrumValue > CreateConstant(double psd)
virtual Ptr< Packet > Recv(uint32_t maxSize, uint32_t flags)=0
Read data from the socket.
void SetMobilityModel(std::string type, std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue(), std::string n8="", const AttributeValue &v8=EmptyAttributeValue(), std::string n9="", const AttributeValue &v9=EmptyAttributeValue())
void Install(Ptr< Node > node) const
Aggregate an instance of a ns3::PacketSocketFactory onto the provided node.
Helper class used to assign positions and mobility models to nodes.
static SpectrumChannelHelper Default()
void Stop(Time stop)
Arrange for all of the Applications in this container to Stop() at the Time given as a parameter...
int main(int argc, char *argv[])
hold objects of type ns3::DataRate
void AddValue(const std::string &name, const std::string &help, T &value)
Add a program argument, assigning to POD.
static void Stop(void)
If an event invokes this method, it will be the last event scheduled by the Simulator::run method bef...
Ptr< Node > Get(uint32_t i) const
Get the Ptr<Node> stored in this container at a given index.
void PhyTxEndTrace(std::string context, Ptr< const Packet > p)
void SetProtocol(uint16_t protocol)
void SetChannel(Ptr< SpectrumChannel > channel)
set the SpectrumChannel that will be used by SpectrumPhy instances created by this helper ...
void Parse(int argc, char *argv[])
Parse the program arguments.
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer.
void SetPositionAllocator(Ptr< PositionAllocator > allocator)
Set the position allocator which will be used to allocate the initial position of every node initiali...
NetDeviceContainer Install(NodeContainer c) const
ApplicationContainer Install(NodeContainer c) const
Install an ns3::OnOffApplication on each node of the input container configured with all the attribut...
a unique identifier for an interface.
Implements WifiSpectrumValue for the 2.4 GHz ISM band only, with a 5 MHz spectrum resolution...
void SetAttribute(std::string name, const AttributeValue &value)
Helper function used to set the underlying application attributes.
void SetNoisePowerSpectralDensity(Ptr< SpectrumValue > noisePsd)
static TypeId LookupByName(std::string name)