17 #include "ns3/core-module.h"
18 #include "ns3/network-module.h"
19 #include "ns3/wifi-module.h"
20 #include "ns3/mobility-module.h"
21 #include "ns3/mpi-interface.h"
22 #include "ns3/ipv4-global-routing-helper.h"
23 #include "ns3/udp-echo-helper.h"
24 #include "ns3/point-to-point-helper.h"
25 #include "ns3/csma-helper.h"
26 #include "ns3/internet-stack-helper.h"
27 #include "ns3/ipv4-address-helper.h"
28 #include "ns3/ipv4-interface-container.h"
55 main (
int argc,
char *argv[])
66 cmd.
AddValue (
"nCsma",
"Number of \"extra\" CSMA nodes/devices", nCsma);
67 cmd.
AddValue (
"nWifi",
"Number of wifi STA devices", nWifi);
68 cmd.
AddValue (
"verbose",
"Tell echo applications to log if true", verbose);
69 cmd.
AddValue (
"nullmsg",
"Enable the use of null-message synchronization", nullmsg);
70 cmd.
AddValue (
"tracing",
"Enable pcap tracing", tracing);
71 cmd.
Parse (argc,argv);
76 if (nWifi > 250 || nCsma > 250)
78 std::cout <<
"Too many wifi or csma nodes, max 200 each." << std::endl;
107 if (systemCount != 2)
109 std::cout <<
"This simulation requires 2 and only 2 logical processors." << std::endl;
115 Ptr<Node> p2pNode1 = CreateObject<Node> (0);
116 Ptr<Node> p2pNode2 = CreateObject<Node> (1);
117 p2pNodes.
Add (p2pNode1);
118 p2pNodes.
Add (p2pNode2);
125 p2pDevices = pointToPoint.
Install (p2pNodes);
128 csmaNodes.
Add (p2pNodes.
Get (1));
129 csmaNodes.
Create (nCsma, 1);
136 csmaDevices = csma.
Install (csmaNodes);
139 wifiStaNodes.
Create (nWifi, 0);
152 mac.
SetType (
"ns3::StaWifiMac",
157 staDevices = wifi.
Install (phy, mac, wifiStaNodes);
163 apDevices = wifi.
Install (phy, mac, wifiApNode);
177 mobility.
Install (wifiStaNodes);
189 address.
SetBase (
"10.1.1.0",
"255.255.255.0");
191 p2pInterfaces = address.
Assign (p2pDevices);
193 address.
SetBase (
"10.1.2.0",
"255.255.255.0");
195 csmaInterfaces = address.
Assign (csmaDevices);
197 address.
SetBase (
"10.1.3.0",
"255.255.255.0");
198 address.
Assign (staDevices);
199 address.
Assign (apDevices);
208 serverApps.
Start (Seconds (1.0));
209 serverApps.
Stop (Seconds (10.0));
224 clientApps.
Start (Seconds (2.0));
225 clientApps.
Stop (Seconds (10.0));
242 phy.
EnablePcap (
"third-distributed-rank0", apDevices.
Get (0));
243 csma.
EnablePcap (
"third-distributed-rank0", csmaDevices.
Get (0),
true);
248 phy.
EnablePcap (
"third-distributed-rank1", apDevices.
Get (0));
249 csma.
EnablePcap (
"third-distributed-rank1", csmaDevices.
Get (0),
true);
260 NS_FATAL_ERROR (
"Can't use distributed simulator without MPI compiled in");
holds a vector of ns3::Application pointers.
void SetChannelAttribute(std::string n1, const AttributeValue &v1)
NS_LOG_COMPONENT_DEFINE("GrantedTimeWindowMpiInterface")
holds a vector of std::pair of Ptr<Ipv4> and interface index.
Ptr< YansWifiChannel > Create(void) const
void SetRemoteStationManager(std::string type, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
static void PopulateRoutingTables(void)
Build a routing database and initialize the routing tables of the nodes in the simulation.
hold variables of type string
Ptr< NetDevice > Get(uint32_t i) const
Get the Ptr<NetDevice> stored in this container at a given index.
Make it easy to create and manage PHY objects for the yans model.
static YansWifiChannelHelper Default(void)
Create a channel helper in a default working state.
NetDeviceContainer Install(NodeContainer c)
virtual void SetType(std::string type, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
Create an application which sends a UDP packet and waits for an echo of this packet.
static void Run(void)
Run the simulation until one of:
aggregate IP/TCP/UDP functionality to existing Nodes.
NetDeviceContainer Install(Ptr< Node > node) const
This method creates an ns3::CsmaChannel with the attributes configured by CsmaHelper::SetChannelAttri...
static void Disable()
Terminates the parallel environment.
Build a set of PointToPointNetDevice objects.
static YansWifiPhyHelper Default(void)
Create a phy helper in a default working state.
void SetDeviceAttribute(std::string name, const AttributeValue &value)
Set an attribute value to be propagated to each NetDevice created by the helper.
helps to create WifiNetDevice objects
#define NS_FATAL_ERROR(msg)
fatal error handling
virtual NetDeviceContainer Install(const WifiPhyHelper &phy, const WifiMacHelper &mac, NodeContainer c) const
ApplicationContainer Install(Ptr< Node > node) const
Create a UdpEchoServerApplication on the specified Node.
hold objects of type ns3::Rectangle
void SetChannel(Ptr< YansWifiChannel > channel)
Create a server application which waits for input UDP packets and sends them back to the original sen...
void Install(Ptr< Node > node) const
"Layout" a single node according to the current position allocator type.
void EnablePcapAll(std::string prefix, bool promiscuous=false)
Enable pcap output on each device (which is of the appropriate type) in the set of all nodes created ...
hold objects of type ns3::Time
static void Enable(int *pargc, char ***pargv)
Sets up parallel communication interface.
Hold an unsigned integer type.
holds a vector of ns3::NetDevice pointers
static NqosWifiMacHelper Default(void)
Create a mac helper in a default working state.
static void Bind(std::string name, const AttributeValue &value)
void Start(Time start)
Arrange for all of the Applications in this container to Start() at the Time given as a parameter...
create non QoS-enabled MAC layers for a ns3::WifiNetDevice.
Parse command-line arguments.
static void Destroy(void)
Every event scheduled by the Simulator::insertAtDestroy method is invoked.
keep track of a set of node pointers.
void SetMobilityModel(std::string type, std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue(), std::string n8="", const AttributeValue &v8=EmptyAttributeValue(), std::string n9="", const AttributeValue &v9=EmptyAttributeValue())
void Install(std::string nodeName) const
Aggregate implementations of the ns3::Ipv4, ns3::Ipv6, ns3::Udp, and ns3::Tcp classes onto the provid...
manage and create wifi channel objects for the yans model.
The IEEE 802.11 SSID Information Element.
build a set of CsmaNetDevice objects
void SetChannelAttribute(std::string name, const AttributeValue &value)
Set an attribute value to be propagated to each Channel created by the helper.
Helper class used to assign positions and mobility models to nodes.
void Stop(Time stop)
Arrange for all of the Applications in this container to Stop() at the Time given as a parameter...
Ipv4InterfaceContainer Assign(const NetDeviceContainer &c)
Assign IP addresses to the net devices specified in the container based on the current network prefix...
void Add(NodeContainer other)
Append the contents of another NodeContainer to the end of this container.
int main(int argc, char *argv[])
static uint32_t GetSystemId()
void AddValue(const std::string &name, const std::string &help, T &value)
Add a program argument, assigning to POD.
static void Stop(void)
If an event invokes this method, it will be the last event scheduled by the Simulator::run method bef...
Ptr< Node > Get(uint32_t i) const
Get the Ptr<Node> stored in this container at a given index.
hold objects of type ns3::Ssid
void Parse(int argc, char *argv[])
Parse the program arguments.
A helper class to make life easier while doing simple IPv4 address assignment in scripts.
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer.
void EnablePcap(std::string prefix, Ptr< NetDevice > nd, bool promiscuous=false, bool explicitFilename=false)
Enable pcap output the indicated net device.
void SetPositionAllocator(Ptr< PositionAllocator > allocator)
Set the position allocator which will be used to allocate the initial position of every node initiali...
Hold a floating point type.
static uint32_t GetSize()
void SetBase(Ipv4Address network, Ipv4Mask mask, Ipv4Address base="0.0.0.1")
Set the base network number, network mask and base address.
void LogComponentEnable(char const *name, enum LogLevel level)
Ipv4Address GetAddress(uint32_t i, uint32_t j=0) const
static WifiHelper Default(void)