50 #include "ns3/core-module.h" 
   51 #include "ns3/network-module.h" 
   52 #include "ns3/mobility-module.h" 
   53 #include "ns3/config-store-module.h" 
   54 #include "ns3/wifi-module.h" 
   55 #include "ns3/energy-module.h" 
   56 #include "ns3/internet-module.h" 
   67 static inline std::string
 
   72   std::ostringstream oss;
 
   73   oss << 
"--\nReceived one packet! Socket: " << iaddr.
GetIpv4 ()
 
   74       << 
" port: " << iaddr.
GetPort ()
 
   91   while ((packet = socket->
RecvFrom (from)))
 
  111                  uint32_t pktCount, 
Time pktInterval)
 
  115       socket->
Send (Create<Packet> (pktSize));
 
  117                            pktCount - 1, pktInterval);
 
  130             << 
"s Current remaining energy = " << remainingEnergy << 
"J" << std::endl;
 
  138             << 
"s Total energy consumed by radio = " << totalEnergy << 
"J" << std::endl;
 
  146             << 
"s Current harvested power = " << harvestedPower << 
" W" << std::endl;
 
  154             << 
"s Total energy harvested by harvester = " 
  155             << TotalEnergyHarvested << 
" J" << std::endl;
 
  160 main (
int argc, 
char *argv[])
 
  171   std::string phyMode (
"DsssRate1Mbps");
 
  173   uint32_t PpacketSize = 200;   
 
  177   uint32_t numPackets = 10000;  
 
  180   double distanceToRx = 100.0;  
 
  188   double harvestingUpdateInterval = 1;  
 
  191   cmd.
AddValue (
"phyMode", 
"Wifi Phy mode", phyMode);
 
  192   cmd.
AddValue (
"Prss", 
"Intended primary RSS (dBm)", Prss);
 
  193   cmd.
AddValue (
"PpacketSize", 
"size of application packet sent", PpacketSize);
 
  194   cmd.
AddValue (
"numPackets", 
"Total number of packets to send", numPackets);
 
  195   cmd.
AddValue (
"startTime", 
"Simulation start time", startTime);
 
  196   cmd.
AddValue (
"distanceToRx", 
"X-Axis distance between nodes", distanceToRx);
 
  197   cmd.
AddValue (
"verbose", 
"Turn on all device log components", verbose);
 
  198   cmd.
Parse (argc, argv);
 
  216   networkNodes.
Add (c.
Get (0));
 
  217   networkNodes.
Add (c.
Get (1));
 
  250   wifiMac.
SetType (
"ns3::AdhocWifiMac");
 
  258   positionAlloc->
Add (Vector (0.0, 0.0, 0.0));
 
  259   positionAlloc->
Add (Vector (2 * distanceToRx, 0.0, 0.0));
 
  269   basicSourceHelper.
Set (
"BasicEnergySourceInitialEnergyJ", 
DoubleValue (1.0));
 
  283   basicHarvesterHelper.
Set (
"PeriodicHarvestedPowerUpdateInterval", 
TimeValue (
Seconds (harvestingUpdateInterval)));
 
  284   basicHarvesterHelper.
Set (
"HarvestablePower", 
StringValue (
"ns3::UniformRandomVariable[Min=0.0|Max=0.1]"));
 
  291   internet.
Install (networkNodes);
 
  295   ipv4.
SetBase (
"10.1.1.0", 
"255.255.255.0");
 
  301   recvSink->
Bind (local);
 
  330                        networkNodes.
Get (0), numPackets, interPacketInterval);
 
void AddPropagationLoss(std::string name, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
 
DeviceEnergyModelContainer Install(Ptr< NetDevice > device, Ptr< EnergySource > source) const 
 
Simulation virtual time values and global simulation resolution. 
 
Assign WifiRadioEnergyModel to wifi devices. 
 
Ipv4Address GetIpv4(void) const 
 
static Ipv4Address GetAny(void)
 
Holds a vector of ns3::EnergySource pointers. 
 
holds a vector of std::pair of Ptr and interface index. 
 
Ptr< YansWifiChannel > Create(void) const 
 
void SetRemoteStationManager(std::string type, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
 
void TotalEnergy(double oldValue, double totalEnergy)
Trace function for total energy consumption at node. 
 
Hold variables of type string. 
 
virtual bool SetAllowBroadcast(bool allowBroadcast)=0
Configure whether broadcast datagram transmissions are allowed. 
 
Make it easy to create and manage PHY objects for the yans model. 
 
static void GenerateTraffic(Ptr< Socket > socket, uint32_t pktSize, Ptr< Node > n, uint32_t pktCount, Time pktInterval)
 
virtual void SetType(std::string type, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
 
Creates a BasicEnergyHarvester object. 
 
#define NS_ASSERT(condition)
At runtime, in debugging builds, if this condition is not true, the program prints the source file...
 
static void Run(void)
Run the simulation. 
 
void TotalEnergyHarvested(double oldValue, double TotalEnergyHarvested)
Trace function for the total energy harvested by the node. 
 
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name. 
 
aggregate IP/TCP/UDP functionality to existing Nodes. 
 
uint32_t GetSize(void) const 
Returns the the size in bytes of the packet (including the zero-filled initial payload). 
 
#define NS_LOG_INFO(msg)
Use NS_LOG to output a message of level LOG_INFO. 
 
void Set(std::string name, const AttributeValue &v)
 
static YansWifiPhyHelper Default(void)
Create a phy helper in a default working state. 
 
helps to create WifiNetDevice objects 
 
Holds a vector of ns3::DeviceEnergyModel pointers. 
 
virtual NetDeviceContainer Install(const WifiPhyHelper &phy, const WifiMacHelper &mac, NodeContainer c) const 
 
a polymophic address class 
 
void SetChannel(Ptr< YansWifiChannel > channel)
 
Ptr< EnergyHarvester > Get(uint32_t i) const 
Get the i-th Ptr stored in this container. 
 
double GetSeconds(void) const 
Get an approximation of the time stored in this instance in the indicated unit. 
 
void Install(Ptr< Node > node) const 
"Layout" a single node according to the current position allocator type. 
 
static EventId Schedule(Time const &delay, MEM mem_ptr, OBJ obj)
Schedule an event to expire after delay. 
 
AttributeValue implementation for Time. 
 
Creates a BasicEnergySource object. 
 
holds a vector of ns3::NetDevice pointers 
 
virtual void SetStandard(enum WifiPhyStandard standard)
 
Callback< R > MakeCallback(R(T::*memPtr)(void), OBJ objPtr)
 
static NqosWifiMacHelper Default(void)
Create a mac helper in a default working state. 
 
void SetRecvCallback(Callback< void, Ptr< Socket > >)
Notify application when new data is available to be read. 
 
static Ptr< Socket > CreateSocket(Ptr< Node > node, TypeId tid)
This method wraps the creation of sockets that is performed on a given node by a SocketFactory specif...
 
void Set(std::string name, const AttributeValue &v)
 
EnergyHarvesterContainer Install(Ptr< EnergySource > source) const 
 
create non QoS-enabled MAC layers for a ns3::WifiNetDevice. 
 
Parse command-line arguments. 
 
static Ipv4Address GetBroadcast(void)
 
static void Destroy(void)
Execute the events scheduled with ScheduleDestroy(). 
 
void ReceivePacket(Ptr< Socket > socket)
 
virtual int Connect(const Address &address)=0
Initiate a connection to a remote host. 
 
Ptr< DeviceEnergyModel > Get(uint32_t i) const 
Get the i-th Ptr stored in this container. 
 
bool TraceConnectWithoutContext(std::string name, const CallbackBase &cb)
Connect a TraceSource to a Callback without a context. 
 
void RemainingEnergy(double oldValue, double remainingEnergy)
Trace function for remaining energy at node. 
 
virtual int Bind(const Address &address)=0
Allocate a local endpoint for this socket. 
 
Every class exported by the ns3 library is enclosed in the ns3 namespace. 
 
static InetSocketAddress ConvertFrom(const Address &address)
Returns an InetSocketAddress which corresponds to the input Address. 
 
keep track of a set of node pointers. 
 
Holds a vector of ns3::EnergyHarvester pointers. 
 
DSSS PHY (Clause 15) and HR/DSSS PHY (Clause 18) 
 
void Set(std::string name, const AttributeValue &v)
 
EnergySourceContainer Install(Ptr< Node > node) const 
 
void SetMobilityModel(std::string type, std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue(), std::string n8="", const AttributeValue &v8=EmptyAttributeValue(), std::string n9="", const AttributeValue &v9=EmptyAttributeValue())
 
void HarvestedPower(double oldValue, double harvestedPower)
Trace function for the power harvested by the energy harvester. 
 
void Install(std::string nodeName) const 
Aggregate implementations of the ns3::Ipv4, ns3::Ipv6, ns3::Udp, and ns3::Tcp classes onto the provid...
 
#define NS_LOG_UNCOND(msg)
Output the requested message unconditionaly. 
 
manage and create wifi channel objects for the yans model. 
 
static Time Now(void)
Return the current simulation virtual time. 
 
Ptr< EnergySource > Get(uint32_t i) const 
Get the i-th Ptr stored in this container. 
 
Helper class used to assign positions and mobility models to nodes. 
 
static void EnableLogComponents(void)
Helper to enable all WifiNetDevice log components with one statement. 
 
Ipv4InterfaceContainer Assign(const NetDeviceContainer &c)
Assign IP addresses to the net devices specified in the container based on the current network prefix...
 
void Add(NodeContainer other)
Append the contents of another NodeContainer to the end of this container. 
 
void AddValue(const std::string &name, const std::string &help, T &value)
Add a program argument, assigning to POD. 
 
static void Stop(void)
Tell the Simulator the calling event should be the last one executed. 
 
Ptr< Node > Get(uint32_t i) const 
Get the Ptr stored in this container at a given index. 
 
Time Seconds(double value)
Construct a Time in the indicated unit. 
 
void SetDefault(std::string name, const AttributeValue &value)
 
void Set(std::string name, const AttributeValue &v)
 
void Add(Vector v)
Add a position to the list of positions. 
 
void Parse(int argc, char *argv[])
Parse the program arguments. 
 
A helper class to make life easier while doing simple IPv4 address assignment in scripts. 
 
DeviceEnergyModelContainer FindDeviceEnergyModels(TypeId tid)
 
uint16_t GetPort(void) const 
 
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer. 
 
virtual Ptr< Packet > RecvFrom(uint32_t maxSize, uint32_t flags, Address &fromAddress)=0
Read a single packet from the socket and retrieve the sender address. 
 
void SetPropagationDelay(std::string name, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
 
virtual int Send(Ptr< Packet > p, uint32_t flags)=0
Send data (or dummy data) to the remote host. 
 
void SetPositionAllocator(Ptr< PositionAllocator > allocator)
Set the position allocator which will be used to allocate the initial position of every node initiali...
 
virtual int Close(void)=0
Close a socket. 
 
This class can be used to hold variables of floating point type such as 'double' or 'float'...
 
a unique identifier for an interface. 
 
static std::string PrintReceivedPacket(Address &from)
 
void SetBase(Ipv4Address network, Ipv4Mask mask, Ipv4Address base="0.0.0.1")
Set the base network number, network mask and base address. 
 
static TypeId LookupByName(std::string name)
Get a TypeId by name.