24 #include "ns3/boolean.h" 
   87     m_dlEgdeSubBandOffset (0),
 
   88     m_dlEdgeSubBandwidth (0),
 
   89     m_ulEgdeSubBandOffset (0),
 
   90     m_ulEdgeSubBandwidth (0),
 
  121     .AddAttribute (
"UlEdgeSubBandOffset",
 
  122                    "Uplink Edge SubBand Offset in number of Resource Block Groups",
 
  125                    MakeUintegerChecker<uint8_t> ())
 
  126     .AddAttribute (
"UlEdgeSubBandwidth",
 
  127                    "Uplink Edge SubBandwidth Configuration in number of Resource Block Groups",
 
  130                    MakeUintegerChecker<uint8_t> ())
 
  131     .AddAttribute (
"DlEdgeSubBandOffset",
 
  132                    "Downlink Edge SubBand Offset in number of Resource Block Groups",
 
  135                    MakeUintegerChecker<uint8_t> ())
 
  136     .AddAttribute (
"DlEdgeSubBandwidth",
 
  137                    "Downlink Edge SubBandwidth Configuration in number of Resource Block Groups",
 
  140                    MakeUintegerChecker<uint8_t> ())
 
  141     .AddAttribute (
"AllowCenterUeUseEdgeSubBand",
 
  142                    "If true center UEs can receive on Edge SubBand RBGs",
 
  146     .AddAttribute (
"RsrqThreshold",
 
  147                    "If the RSRQ of is worse than this threshold, UE should be served in Edge sub-band",
 
  150                    MakeUintegerChecker<uint8_t> ())
 
  151     .AddAttribute (
"CenterPowerOffset",
 
  152                    "PdschConfigDedicated::Pa value for Edge Sub-band, default value dB0",
 
  155                    MakeUintegerChecker<uint8_t> ())
 
  156     .AddAttribute (
"EdgePowerOffset",
 
  157                    "PdschConfigDedicated::Pa value for Edge Sub-band, default value dB0",
 
  160                    MakeUintegerChecker<uint8_t> ())
 
  161     .AddAttribute (
"CenterAreaTpc",
 
  162                    "TPC value which will be set in DL-DCI for UEs in center area" 
  163                    "Absolute mode is used, default value 1 is mapped to -1 according to" 
  164                    "TS36.213 Table 5.1.1.1-2",
 
  167                    MakeUintegerChecker<uint8_t> ())
 
  168     .AddAttribute (
"EdgeAreaTpc",
 
  169                    "TPC value which will be set in DL-DCI for UEs in edge area" 
  170                    "Absolute mode is used, default value 1 is mapped to -1 according to" 
  171                    "TS36.213 Table 5.1.1.1-2",
 
  174                    MakeUintegerChecker<uint8_t> ())
 
  226   NS_LOG_LOGIC (
this << 
" requesting Event A1 measurements" 
  227                      << 
" (threshold = 0" << 
")");
 
  294                  "(DlEgdeSubBandOffset+DlEdgeSubBandwidth) higher than DlBandwidth");
 
  315                  "(UlEgdeSubBandOffset+UlEdgeSubBandwidth) higher than DlBandwidth");
 
  348   std::map< uint16_t, uint8_t >::iterator it = 
m_ues.find (rnti);
 
  349   if (it == 
m_ues.end ())
 
  366   return (edgeRbg && edgeUe) || (!edgeRbg && !edgeUe);
 
  394   std::map< uint16_t, uint8_t >::iterator it = 
m_ues.find (rnti);
 
  395   if (it == 
m_ues.end ())
 
  412   return (edgeRbg && edgeUe) || (!edgeRbg && !edgeUe);
 
  419   NS_LOG_WARN (
"Method should not be called, because it is empty");
 
  426   NS_LOG_WARN (
"Method should not be called, because it is empty");
 
  433   NS_LOG_WARN (
"Method should not be called, because it is empty");
 
  456   std::map< uint16_t, uint8_t >::iterator it = 
m_ues.find (rnti);
 
  457   if (it == 
m_ues.end ())
 
  483       return minContinuousUlBandwidth;
 
  490   minContinuousUlBandwidth =
 
  491     ((leftBandwidth > 0 ) && (leftBandwidth < minContinuousUlBandwidth)) ? leftBandwidth : minContinuousUlBandwidth;
 
  493   minContinuousUlBandwidth =
 
  494     ((centerBandwidth > 0 ) && (centerBandwidth < minContinuousUlBandwidth)) ? centerBandwidth : minContinuousUlBandwidth;
 
  496   minContinuousUlBandwidth =
 
  497     ((rightBandwidth > 0 ) && (rightBandwidth < minContinuousUlBandwidth)) ? rightBandwidth : minContinuousUlBandwidth;
 
  499   NS_LOG_INFO (
"minContinuousUlBandwidth: " << (
int)minContinuousUlBandwidth);
 
  501   return minContinuousUlBandwidth;
 
  510                         << 
" RSRP: " << (uint16_t)measResults.
rsrpResult 
  511                         << 
" RSRQ: " << (uint16_t)measResults.
rsrqResult);
 
  519       std::map< uint16_t, uint8_t >::iterator it = 
m_ues.find (rnti);
 
  520       if (it == 
m_ues.end ())
 
  524       it = 
m_ues.find (rnti);
 
  530               NS_LOG_INFO (
"UE RNTI: " << rnti << 
" will be served in Edge sub-band");
 
  542               NS_LOG_INFO (
"UE RNTI: " << rnti << 
" will be served in Center sub-band");
 
  557   NS_LOG_WARN (
"Method should not be called, because it is empty");
 
virtual void SetLteFfrRrcSapUser(LteFfrRrcSapUser *s)
Set the "user" part of the LteFfrRrcSap interface that this frequency reuse algorithm instance will i...
 
Service Access Point (SAP) offered by the Frequency Reuse algorithm instance to the eNodeB RRC instan...
 
uint8_t dlEgdeSubBandOffset
 
uint8_t dlEdgeSubBandwidth
 
virtual void DoInitialize(void)
Initialize() implementation. 
 
Template for the implementation of the LteFfrRrcSapProvider as a member of an owner class of type C t...
 
Service Access Point (SAP) offered by the eNodeB RRC instance to the Frequency Reuse algorithm instan...
 
#define NS_LOG_FUNCTION(parameters)
If log level LOG_FUNCTION is enabled, this macro will output all input parameters separated by "...
 
static const struct ns3::FrSoftUplinkDefaultConfiguration g_frSoftUplinkDefaultConfiguration[]
 
virtual void SetLteFfrSapUser(LteFfrSapUser *s)
Set the "user" part of the LteFfrSap interface that this frequency reuse algorithm instance will inte...
 
AttributeValue implementation for Boolean. 
 
void SetUplinkConfiguration(uint16_t cellId, uint8_t bandwidth)
 
virtual void DoReportDlCqiInfo(const struct FfMacSchedSapProvider::SchedDlCqiInfoReqParameters ¶ms)
DoReportDlCqiInfo. 
 
void InitializeDownlinkRbgMaps()
 
#define NS_OBJECT_ENSURE_REGISTERED(type)
Register an Object subclass with the TypeId system. 
 
void InitializeUplinkRbgMaps()
 
void SetDownlinkConfiguration(uint16_t cellId, uint8_t bandwidth)
 
enum ns3::LteRrcSap::ReportConfigEutra::@70 eventId
Choice of E-UTRA event triggered reporting criteria. 
 
Ptr< const AttributeAccessor > MakeBooleanAccessor(T1 a1)
Create an AttributeAccessor for a class data member, or a lone class get functor or set method...
 
virtual LteFfrRrcSapProvider * GetLteFfrRrcSapProvider()
Export the "provider" part of the LteFfrRrcSap interface. 
 
ThresholdEutra threshold1
Threshold for event A1, A2, A4, and A5. 
 
Specifies criteria for triggering of an E-UTRA measurement reporting event. 
 
LteFrSoftAlgorithm()
Creates a trivial ffr algorithm instance. 
 
uint8_t m_ulBandwidth
uplink bandwidth in RBs 
 
virtual uint8_t DoGetTpc(uint16_t rnti)
DoGetTpc for UE. 
 
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name. 
 
uint8_t ulEdgeSubBandwidth
 
#define NS_LOG_INFO(msg)
Use NS_LOG to output a message of level LOG_INFO. 
 
LteFfrSapUser * m_ffrSapUser
 
uint8_t m_ulEdgeSubBandwidth
 
LteFfrRrcSapProvider * m_ffrRrcSapProvider
 
virtual uint8_t AddUeMeasReportConfigForFfr(LteRrcSap::ReportConfigEutra reportConfig)=0
Request a certain reporting configuration to be fulfilled by the UEs attached to the eNodeB entity...
 
virtual void SetPdschConfigDedicated(uint16_t rnti, LteRrcSap::PdschConfigDedicated pdschConfigDedicated)=0
Instruct the eNodeB RRC entity to perform RrcConnectionReconfiguration to inform UE about new PdschCo...
 
std::vector< bool > m_dlRbgMap
 
virtual std::vector< bool > DoGetAvailableUlRbg()
Implementation of LteFfrSapProvider::GetAvailableUlRbg. 
 
Template for the implementation of the LteFfrSapProvider as a member of an owner class of type C to w...
 
LteFfrSapProvider * m_ffrSapProvider
 
LteFfrRrcSapUser * m_ffrRrcSapUser
 
Reference Signal Received Quality. 
 
Event A1: Serving becomes better than absolute threshold. 
 
static TypeId GetTypeId()
 
Service Access Point (SAP) offered by the Frequency Reuse algorithm instance to the MAC Scheduler ins...
 
Hold an unsigned integer type. 
 
bool m_enabledInUplink
If true FR algorithm will also work in Uplink. 
 
bool m_needReconfiguration
If true FR algorithm will be reconfigured. 
 
virtual void Reconfigure()
Automatic FR reconfiguration. 
 
virtual LteFfrSapProvider * GetLteFfrSapProvider()
Export the "provider" part of the LteFfrSap interface. 
 
uint8_t m_dlBandwidth
downlink bandwidth in RBs 
 
std::vector< bool > m_dlEdgeRbgMap
 
#define NS_LOG_LOGIC(msg)
Use NS_LOG to output a message of level LOG_LOGIC. 
 
virtual ~LteFrSoftAlgorithm()
 
uint8_t m_edgePowerOffset
 
Every class exported by the ns3 library is enclosed in the ns3 namespace. 
 
The abstract base class of a Frequency Reuse algorithm. 
 
Ptr< const AttributeChecker > MakeBooleanChecker(void)
 
static const struct ns3::FrSoftDownlinkDefaultConfiguration g_frSoftDownlinkDefaultConfiguration[]
 
std::map< uint16_t, uint8_t > m_ues
 
uint8_t range
Value range used in RSRP/RSRQ threshold. 
 
virtual bool DoIsUlRbgAvailableForUe(int i, uint16_t rnti)
Implementation of LteFfrSapProvider::IsUlRbgAvailableForUe. 
 
Service Access Point (SAP) offered by the eNodeB RRC instance to the Frequency Reuse algorithm instan...
 
virtual void DoReportUeMeas(uint16_t rnti, LteRrcSap::MeasResults measResults)
Implementation of LteFfrRrcSapProvider::ReportUeMeas. 
 
enum ns3::LteRrcSap::ReportConfigEutra::@72 triggerQuantity
The quantities used to evaluate the triggering condition for the event, see 3GPP TS 36...
 
#define NS_ASSERT_MSG(condition, message)
At runtime, in debugging builds, if this condition is not true, the program prints the message to out...
 
Parameters of the SCHED_DL_CQI_INFO_REQ primitive. 
 
uint8_t m_frCellTypeId
FFR cell type ID for automatic configuration. 
 
Parameters of the SCHED_UL_CQI_INFO_REQ primitive. 
 
#define NS_LOG_WARN(msg)
Use NS_LOG to output a message of level LOG_WARN. 
 
enum ns3::LteRrcSap::ThresholdEutra::@68 choice
 
std::vector< bool > m_ulEdgeRbgMap
 
virtual void DoInitialize()
Initialize() implementation. 
 
uint8_t m_egdeSubBandThreshold
 
int GetRbgSize(int dlbandwidth)
Get RBG size for DL Bandwidth according to table 7.1.6.1-1 of 36.213. 
 
enum ns3::LteRrcSap::ReportConfigEutra::@74 reportInterval
Indicates the interval between periodical reports. 
 
virtual std::vector< bool > DoGetAvailableDlRbg()
Implementation of LteFfrSapProvider::GetAvailableDlRbg. 
 
bool m_isEdgeSubBandForCenterUe
 
virtual void DoDispose()
Destructor implementation. 
 
const uint16_t NUM_DOWNLINK_CONFS(sizeof(g_ffrEnhancedDownlinkDefaultConfiguration)/sizeof(FfrEnhancedDownlinkDefaultConfiguration))
 
uint8_t m_centerPowerOffset
 
uint8_t ulEgdeSubBandOffset
 
virtual uint8_t DoGetMinContinuousUlBandwidth()
DoGetMinContinuousUlBandwidth in number of RB. 
 
RSRQ is used for the threshold. 
 
Soft Frequency Reuse algorithm implementation. 
 
Ptr< const AttributeAccessor > MakeUintegerAccessor(T1 a1)
Create an AttributeAccessor for a class data member, or a lone class get functor or set method...
 
a unique identifier for an interface. 
 
TypeId SetParent(TypeId tid)
Set the parent TypeId. 
 
virtual void DoReportUlCqiInfo(const struct FfMacSchedSapProvider::SchedUlCqiInfoReqParameters ¶ms)
DoReportUlCqiInfo. 
 
const uint16_t NUM_UPLINK_CONFS(sizeof(g_ffrEnhancedUplinkDefaultConfiguration)/sizeof(FfrEnhancedUplinkDefaultConfiguration))
 
uint8_t m_dlEdgeSubBandwidth
 
std::vector< bool > m_ulRbgMap
 
uint8_t m_ulEgdeSubBandOffset
 
uint8_t m_dlEgdeSubBandOffset
 
virtual void DoRecvLoadInformation(EpcX2Sap::LoadInformationParams params)
DoRecvLoadInformation. 
 
virtual bool DoIsDlRbgAvailableForUe(int i, uint16_t rnti)
Implementation of LteFfrSapProvider::IsDlRbgAvailableForUe.