18 #include "ns3/wifi-mac.h" 
   19 #include "ns3/wifi-phy.h" 
   21 #include "ns3/pointer.h" 
   22 #include "ns3/string.h" 
   23 #include "ns3/wifi-mode.h" 
   24 #include "ns3/config.h" 
   25 #include "ns3/names.h" 
   26 #include "ns3/abort.h" 
   27 #include "ns3/ampdu-subframe-header.h" 
   28 #include "ns3/wave-net-device.h" 
   29 #include "ns3/minstrel-wifi-manager.h" 
   30 #include "ns3/radiotap-header.h" 
   31 #include "ns3/unused.h" 
   57   NS_LOG_FUNCTION (stream << context << p << mode << preamble << txLevel);
 
  144       NS_LOG_INFO (
"YansWavePhyHelper::EnablePcapInternal(): Device " << &device << 
" not of type ns3::WaveNetDevice");
 
  148   std::vector<Ptr<WifiPhy> > phys = device->
GetPhys ();
 
  149   NS_ABORT_MSG_IF (phys.size () == 0, 
"EnablePcapInternal(): Phy layer in WaveNetDevice must be set");
 
  153   std::string filename;
 
  154   if (explicitFilename)
 
  165   std::vector<Ptr<WifiPhy> >::iterator i;
 
  166   for (i = phys.begin (); i != phys.end (); ++i)
 
  179   bool explicitFilename)
 
  189       NS_LOG_INFO (
"EnableAsciiInternal(): Device " << device << 
" not of type ns3::WaveNetDevice");
 
  199   uint32_t nodeid = nd->GetNode ()->GetId ();
 
  200   uint32_t deviceid = nd->GetIfIndex ();
 
  201   std::ostringstream oss;
 
  218       std::string filename;
 
  219       if (explicitFilename)
 
  236       oss << 
"/NodeList/" << nodeid << 
"/DeviceList/" << deviceid << 
"/$ns3::WaveNetDevice/PhyEntities/*/$ns3::WifiPhy/State/RxOk";
 
  240       oss << 
"/NodeList/" << nodeid << 
"/DeviceList/" << deviceid << 
"/$ns3::WaveNetDevice/PhyEntities/*/$ns3::WifiPhy/State/Tx";
 
  254   oss << 
"/NodeList/" << nodeid << 
"/DeviceList/" << deviceid << 
"/$ns3::WaveNetDevice/PhyEntities/*/$ns3::WifiPhy/RxOk";
 
  258   oss << 
"/NodeList/" << nodeid << 
"/DeviceList/" << deviceid << 
"/$ns3::WaveNetDevice/PhyEntities/*/$ns3::WifiPhy/State/Tx";
 
  281                                   "ControlMode",
StringValue (
"OfdmRate6MbpsBW10MHz"),
 
  282                                   "NonUnicastMode", 
StringValue (
"OfdmRate6MbpsBW10MHz"));
 
  289   if (channelNumbers.size () == 0)
 
  293   for (std::vector<uint32_t>::iterator i = channelNumbers.begin (); i != channelNumbers.end (); ++i)
 
  297           NS_FATAL_ERROR (
"the channel number " << (*i) << 
" is not a valid WAVE channel number");
 
  312       NS_FATAL_ERROR (
"the number of assigned WAVE PHY entities is more than the number of valid WAVE channels");
 
  371   catch (
const std::bad_cast &)
 
  373       NS_FATAL_ERROR (
"WifiMacHelper should be the class or subclass of QosWaveMacHelper");
 
  404           device->
AddMac (*k, ocbMac);
 
  410       devices.
Add (device);
 
  424   Ptr<Node> node = Names::Find<Node> (nodeName);
 
  448   int64_t currentStream = stream;
 
  457           std::vector<Ptr<WifiPhy> > phys = wave->
GetPhys ();
 
  458           for (std::vector<
Ptr<WifiPhy> >::iterator j = phys.begin (); j != phys.end (); ++j)
 
  460               currentStream += (*j)->AssignStreams (currentStream);
 
  464           std::map<uint32_t, Ptr<OcbWifiMac> > macs = wave->
GetMacs ();
 
  465           for ( std::map<uint32_t, 
Ptr<OcbWifiMac> >::iterator k = macs.begin (); k != macs.end (); ++k)
 
  474                   currentStream += minstrel->AssignStreams (currentStream);
 
  478               rmac->GetAttribute (
"DcaTxop", ptr);
 
  480               currentStream += dcaTxop->AssignStreams (currentStream);
 
  482               rmac->GetAttribute (
"VO_EdcaTxopN", ptr);
 
  484               currentStream += vo_edcaTxopN->
AssignStreams (currentStream);
 
  486               rmac->GetAttribute (
"VI_EdcaTxopN", ptr);
 
  488               currentStream += vi_edcaTxopN->
AssignStreams (currentStream);
 
  490               rmac->GetAttribute (
"BE_EdcaTxopN", ptr);
 
  492               currentStream += be_edcaTxopN->
AssignStreams (currentStream);
 
  494               rmac->GetAttribute (
"BK_EdcaTxopN", ptr);
 
  496               currentStream += bk_edcaTxopN->
AssignStreams (currentStream);
 
  500   return (currentStream - stream);
 
static void EnableLogComponents(void)
Helper to enable all WaveNetDevice log components with one statement. 
 
Iterator Begin(void) const 
Get an iterator which refers to the first NetDevice in the container. 
 
void CreateMacForChannel(std::vector< uint32_t > channelNumbers)
 
ObjectFactory m_channelScheduler
channel scheduler 
 
Manage ASCII trace files for device models. 
 
#define NS_LOG_FUNCTION(parameters)
If log level LOG_FUNCTION is enabled, this macro will output all input parameters separated by "...
 
static std::vector< uint32_t > GetWaveChannels(void)
 
int64_t AssignStreams(NetDeviceContainer c, int64_t stream)
Assign a fixed random variable stream number to the random variables used by the Phy and Mac aspects ...
 
static void AsciiPhyReceiveSinkWithoutContext(Ptr< OutputStreamWrapper > stream, Ptr< const Packet > p, double snr, WifiMode mode, enum WifiPreamble preamble)
ASCII Phy receive sink without context. 
 
std::vector< Ptr< Node > >::const_iterator Iterator
Node container iterator. 
 
Hold variables of type string. 
 
Hold a value for an Attribute. 
 
Manage pcap files for device models. 
 
Callback< R > MakeBoundCallback(R(*fnPtr)(TX), ARG a1)
Make Callbacks with one bound argument. 
 
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name. 
 
static bool IsWaveChannel(uint32_t channelNumber)
 
void SetTypeId(TypeId tid)
Set the TypeId of the Objects to be created by this factory. 
 
#define NS_UNUSED(x)
Mark a local variable as unused. 
 
OFDM PHY for the 5 GHz band (Clause 17 with 10 MHz channel bandwidth) 
 
This class holds together multiple, ns3::WifiPhy, and ns3::OcbWifiMac (including ns3::WifiRemoteStati...
 
Iterator End(void) const 
Get an iterator which indicates past-the-last Node in the container. 
 
static void AsciiPhyReceiveSinkWithContext(Ptr< OutputStreamWrapper > stream, std::string context, Ptr< const Packet > p, double snr, WifiMode mode, enum WifiPreamble preamble)
ASCII Phy receive sink with context. 
 
static WaveHelper Default(void)
 
void EnableForWave(Ptr< WaveNetDevice > device)
 
void ConfigureStandard(WifiPhyStandard standard)
 
#define NS_LOG_INFO(msg)
Use NS_LOG to output a message of level LOG_INFO. 
 
#define NS_FATAL_ERROR(msg)
Report a fatal error with a message and terminate. 
 
Ptr< OutputStreamWrapper > CreateFileStream(std::string filename, std::ios::openmode filemode=std::ios::out)
Create and initialize an output stream object we'll use to write the traced bits. ...
 
int64_t AssignStreams(int64_t stream)
Assign a fixed random variable stream number to the random variables used by this model...
 
std::string GetFilenameFromDevice(std::string prefix, Ptr< NetDevice > device, bool useObjectNames=true)
Let the ascii trace helper figure out a reasonable filename to use for an ascii trace file associated...
 
virtual NetDeviceContainer Install(const WifiPhyHelper &phy, const WifiMacHelper &mac, NodeContainer c) const 
 
virtual void SetAddress(Address address)
Set the address of this interface. 
 
represent a single transmission modeA WifiMode is implemented by a single integer which is used to lo...
 
static void PcapSniffTxEvent(Ptr< PcapFileWrapper > file, Ptr< const Packet > packet, uint16_t channelFreqMhz, WifiTxVector txVector, MpduInfo aMpdu)
 
WifiPreamble
The type of preamble to be used by an IEEE 802.11 transmission. 
 
double GetSeconds(void) const 
Get an approximation of the time stored in this instance in the indicated unit. 
 
void SetRemoteStationManager(std::string type, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
 
This queue contains packets for a particular access class. 
 
static uint32_t GetNumberOfWaveChannels(void)
 
std::string GetFilenameFromDevice(std::string prefix, Ptr< NetDevice > device, bool useObjectNames=true)
Let the pcap helper figure out a reasonable filename to use for a pcap file associated with a device...
 
std::vector< uint32_t > m_macsForChannelNumber
MACs for channel number. 
 
void LogComponentEnable(char const *name, enum LogLevel level)
Enable the logging output associated with that log component. 
 
static Mac48Address Allocate(void)
Allocate a new Mac48Address. 
 
static void EnablePrinting(void)
Enable printing packets metadata. 
 
virtual void EnablePcapInternal(std::string prefix, Ptr< NetDevice > nd, bool promiscuous, bool explicitFilename)
Enable pcap output the indicated net device. 
 
Ptr< Object > Create(void) const 
Create an Object instance of the configured TypeId. 
 
void Add(NetDeviceContainer other)
Append the contents of another NetDeviceContainer to the end of this container. 
 
void SetChannelScheduler(Ptr< ChannelScheduler > channelScheduler)
 
helps to create WaveNetDevice objects 
 
void SetChannelManager(Ptr< ChannelManager > channelManager)
 
holds a vector of ns3::NetDevice pointers 
 
static void PcapSniffRxEvent(Ptr< PcapFileWrapper > file, Ptr< const Packet > packet, uint16_t channelFreqMhz, WifiTxVector txVector, MpduInfo aMpdu, SignalNoiseDbm signalNoise)
 
void SetChannelScheduler(std::string type, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
 
void ConnectWithoutContext(std::string path, const CallbackBase &cb)
 
Qos Wave Mac Helper class. 
 
hold a list of per-remote-station state. 
 
virtual void EnableAsciiInternal(Ptr< OutputStreamWrapper > stream, std::string prefix, Ptr< NetDevice > nd, bool explicitFilename)
Enable ascii trace output on the indicated net device. 
 
void Connect(std::string path, const CallbackBase &cb)
 
static uint32_t GetCch(void)
 
bool TraceConnectWithoutContext(std::string name, const CallbackBase &cb)
Connect a TraceSource to a Callback without a context. 
 
virtual void SetWifiRemoteStationManager(const Ptr< WifiRemoteStationManager > stationManager)
 
std::map< uint32_t, Ptr< OcbWifiMac > > GetMacs(void) const 
 
Every class exported by the ns3 library is enclosed in the ns3 namespace. 
 
keep track of a set of node pointers. 
 
Hold objects of type Ptr. 
 
void CreatePhys(uint32_t phys)
 
Iterator Begin(void) const 
Get an iterator which refers to the first Node in the container. 
 
void Set(std::string name, const AttributeValue &value)
Set an attribute to be set during construction. 
 
virtual void SetChannelNumber(uint8_t id)
Set channel number. 
 
create MAC layers for a ns3::WifiNetDevice. 
 
To trace WaveNetDevice, we have to overwrite the trace functions of class YansWifiPhyHelper. 
 
static Time Now(void)
Return the current simulation virtual time. 
 
void SetErrorRateModel(std::string name, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
 
virtual Ptr< WifiMac > Create(void) const 
 
std::vector< Ptr< WifiPhy > > GetPhys(void) const 
 
void AddPhy(Ptr< WifiPhy > phy)
 
ObjectFactory m_stationManager
station manager 
 
Instantiate subclasses of ns3::Object. 
 
static void EnableLogComponents(void)
Helper to enable all WifiNetDevice log components with one statement. 
 
virtual Ptr< WifiPhy > Create(Ptr< Node > node, Ptr< NetDevice > device) const =0
 
uint32_t AddDevice(Ptr< NetDevice > device)
Associate a NetDevice to this node. 
 
#define NS_ABORT_MSG_IF(cond, msg)
Abnormal program termination if a condition is true, with a message. 
 
static YansWavePhyHelper Default(void)
Create a phy helper in a default working state. 
 
void SetVsaManager(Ptr< VsaManager > vsaManager)
 
std::vector< Ptr< NetDevice > >::const_iterator Iterator
NetDevice container iterator. 
 
void AddMac(uint32_t channelNumber, Ptr< OcbWifiMac > mac)
 
virtual void ConfigureStandard(WifiPhyStandard standard)
Configure the PHY-level parameters for different Wi-Fi standard. 
 
void SetChannelCoordinator(Ptr< ChannelCoordinator > channelCoordinator)
 
Iterator End(void) const 
Get an iterator which indicates past-the-last NetDevice in the container. 
 
handle packet fragmentation and retransmissions. 
 
PcapHelper::DataLinkType GetPcapDataLinkType(void) const 
Get the data link type of PCAP traces to be used. 
 
static void AsciiPhyTransmitSinkWithContext(Ptr< OutputStreamWrapper > stream, std::string context, Ptr< const Packet > p, WifiMode mode, WifiPreamble preamble, uint8_t txLevel)
ASCII Phy transmit sink with context. 
 
std::ostream * GetStream(void)
Return a pointer to an ostream previously set in the wrapper. 
 
This class will assign channel access for requests from higher layers. 
 
uint32_t m_physNumber
Phy number. 
 
static void AsciiPhyTransmitSinkWithoutContext(Ptr< OutputStreamWrapper > stream, Ptr< const Packet > p, WifiMode mode, WifiPreamble preamble, uint8_t txLevel)
ASCII Phy transmit sink without context.