27 #include "ns3/core-module.h"
28 #include "ns3/applications-module.h"
29 #include "ns3/wifi-module.h"
30 #include "ns3/mobility-module.h"
31 #include "ns3/spectrum-module.h"
32 #include "ns3/internet-module.h"
93 uint16_t channelFreqMhz,
114 bandInfo.
fc = 5180e6;
115 bandInfo.
fl = 5180e6 - 10e6;
116 bandInfo.
fh = 5180e6 + 10e6;
119 bands.push_back (bandInfo);
121 SpectrumModelWifi5180MHz = Create<SpectrumModel> (bands);
126 int main (
int argc,
char *argv[])
129 double distance = 50;
130 double simulationTime = 10;
131 uint16_t index = 256;
132 std::string wifiType =
"ns3::SpectrumWifiPhy";
133 std::string errorModelType =
"ns3::NistErrorRateModel";
135 const uint32_t tcpPacketSize = 1448;
136 double waveformPower = 0;
139 cmd.
AddValue (
"simulationTime",
"Simulation time in seconds", simulationTime);
140 cmd.
AddValue (
"udp",
"UDP if set to 1, TCP otherwise", udp);
141 cmd.
AddValue (
"distance",
"meters separation between nodes", distance);
142 cmd.
AddValue (
"index",
"restrict index to single value between 0 and 31", index);
143 cmd.
AddValue (
"wifiType",
"select ns3::SpectrumWifiPhy or ns3::YansWifiPhy", wifiType);
144 cmd.
AddValue (
"errorModelType",
"select ns3::NistErrorRateModel or ns3::YansErrorRateModel", errorModelType);
145 cmd.
AddValue (
"enablePcap",
"enable pcap output", enablePcap);
146 cmd.
AddValue (
"waveformPower",
"Waveform power", waveformPower);
147 cmd.
Parse (argc,argv);
149 uint16_t startIndex = 0;
150 uint16_t stopIndex = 31;
157 std::cout <<
"wifiType: " << wifiType <<
" distance: " << distance <<
"m; time: " << simulationTime <<
"; TxPower: 16 dBm (40 mW)" << std::endl;
158 std::cout << std::setw (5) <<
"index" <<
159 std::setw (6) <<
"MCS" <<
160 std::setw (13) <<
"Rate (Mb/s)" <<
161 std::setw (12) <<
"Tput (Mb/s)" <<
162 std::setw (10) <<
"Received " <<
163 std::setw (12) <<
"Signal (dBm)" <<
164 std::setw (12) <<
"Noi+Inf(dBm)" <<
165 std::setw (9) <<
"SNR (dB)" <<
167 for (uint16_t i = startIndex; i <= stopIndex; i++)
169 uint32_t payloadSize;
185 interferingNode.
Create (1);
190 if (wifiType ==
"ns3::YansWifiPhy")
204 else if (i > 7 && i <= 15)
209 else if (i > 15 && i <= 23)
220 else if (wifiType ==
"ns3::SpectrumWifiPhy")
226 = CreateObject<MultiModelSpectrumChannel> ();
228 = CreateObject<FriisPropagationLossModel> ();
229 lossModel->SetFrequency (5.180e9);
233 = CreateObject<ConstantSpeedPropagationDelayModel> ();
245 else if (i > 7 && i <= 15)
250 else if (i > 15 && i <= 23)
436 "ControlMode", DataRate);
441 if (wifiType ==
"ns3::YansWifiPhy")
443 mac.
SetType (
"ns3::StaWifiMac",
445 staDevice = wifi.
Install (phy, mac, wifiStaNode);
448 apDevice = wifi.
Install (phy, mac, wifiApNode);
451 else if (wifiType ==
"ns3::SpectrumWifiPhy")
453 mac.
SetType (
"ns3::StaWifiMac",
455 staDevice = wifi.
Install (spectrumPhy, mac, wifiStaNode);
458 apDevice = wifi.
Install (spectrumPhy, mac, wifiApNode);
465 positionAlloc->
Add (Vector (0.0, 0.0, 0.0));
466 positionAlloc->
Add (Vector (distance, 0.0, 0.0));
467 positionAlloc->
Add (Vector (distance, distance, 0.0));
473 mobility.
Install (wifiStaNode);
474 mobility.
Install (interferingNode);
482 address.
SetBase (
"192.168.1.0",
"255.255.255.0");
486 staNodeInterface = address.
Assign (staDevice);
487 apNodeInterface = address.
Assign (apDevice);
496 serverApp = server.Install (wifiStaNode.
Get (0));
502 client.SetAttribute (
"Interval",
TimeValue (
Time (
"0.00001")));
503 client.SetAttribute (
"PacketSize",
UintegerValue (payloadSize));
511 uint16_t port = 50000;
514 serverApp = packetSinkHelper.Install (wifiStaNode.
Get (0));
519 onoff.SetAttribute (
"OnTime",
StringValue (
"ns3::ConstantRandomVariable[Constant=1]"));
520 onoff.SetAttribute (
"OffTime",
StringValue (
"ns3::ConstantRandomVariable[Constant=0]"));
521 onoff.SetAttribute (
"PacketSize",
UintegerValue (payloadSize));
524 onoff.SetAttribute (
"Remote", remoteAddress);
532 *wgPsd = waveformPower / (100 * 180000);
535 if (wifiType ==
"ns3::SpectrumWifiPhy")
538 waveformGeneratorHelper.
SetChannel (spectrumChannel);
553 std::stringstream ss;
554 ss <<
"wifi-spectrum-per-example-" << i;
567 if (val.Get () != 5180)
569 NS_FATAL_ERROR (
"Error: Wi-Fi nodes must be tuned to 5180 MHz to match the waveform generator");
575 double throughput = 0;
576 uint32_t totalPacketsThrough = 0;
580 totalPacketsThrough = DynamicCast<UdpServer> (serverApp.
Get (0))->GetReceived ();
581 throughput = totalPacketsThrough * payloadSize * 8 / (simulationTime * 1000000.0);
586 uint32_t totalBytesRx = DynamicCast<PacketSink> (serverApp.
Get (0))->GetTotalRx ();
587 totalPacketsThrough = totalBytesRx / tcpPacketSize;
588 throughput = totalBytesRx * 8 / (simulationTime * 1000000.0);
590 std::cout << std::setw (5) << i <<
591 std::setw (6) << (i % 8) <<
592 std::setprecision (2) << std::fixed <<
593 std::setw (10) << datarate <<
594 std::setw (12) << throughput <<
595 std::setw (8) << totalPacketsThrough;
596 if (totalPacketsThrough > 0)
605 std::cout << std::setw (12) <<
"N/A" <<
606 std::setw (12) <<
"N/A" <<
607 std::setw (12) <<
"N/A" <<
void AddPropagationLoss(std::string name, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
void Set(std::string name, const AttributeValue &v)
holds a vector of ns3::Application pointers.
Ptr< SpectrumModel > SpectrumModelWifi5180MHz
Simulation virtual time values and global simulation resolution.
static Ipv4Address GetAny(void)
AttributeValue implementation for Boolean.
HT PHY for the 5 GHz band (clause 20)
This class mimics the TXVECTOR which is to be passed to the PHY in order to define the parameters whi...
double Integral(const SpectrumValue &arg)
holds a vector of std::pair of Ptr and interface index.
Ptr< YansWifiChannel > Create(void) const
void SetRemoteStationManager(std::string type, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
Ptr< T > GetObject(void) const
Get a pointer to the requested aggregated Object.
Hold variables of type string.
Ptr< NetDevice > Get(uint32_t i) const
Get the Ptr stored in this container at a given index.
Make it easy to create and manage PHY objects for the yans model.
static void Run(void)
Run the simulation.
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name.
virtual void AddPropagationLossModel(Ptr< PropagationLossModel > loss)
Add the single-frequency propagation loss model to be used.
aggregate IP/TCP/UDP functionality to existing Nodes.
#define NS_LOG_INFO(msg)
Use NS_LOG to output a message of level LOG_INFO.
#define NS_FATAL_ERROR(msg)
Report a fatal error with a message and terminate.
A helper to make it easier to instantiate an ns3::PacketSinkApplication on a set of nodes...
static YansWifiPhyHelper Default(void)
Create a phy helper in a default working state.
This class implements a device which does not communicate, in the sense that it does not interact wit...
helps to create WifiNetDevice objects
A helper to make it easier to instantiate an ns3::OnOffApplication on a set of nodes.
std::vector< BandInfo > Bands
Container of BandInfo.
a polymophic address class
Class for representing data rates.
virtual void SetStandard(WifiPhyStandard standard)
void SetChannel(Ptr< YansWifiChannel > channel)
Ptr< WifiPhy > GetPhy(void) const
U * GetPointer(const Ptr< U > &p)
void Install(Ptr< Node > node) const
"Layout" a single node according to the current position allocator type.
static EventId Schedule(Time const &delay, MEM mem_ptr, OBJ obj)
Schedule an event to expire after delay.
Create a client application which sends UDP packets carrying a 32bit sequence number and a 64 bit tim...
static SpectrumWifiPhyHelper Default(void)
Create a phy helper in a default working state.
AttributeValue implementation for Time.
void SetChannel(Ptr< SpectrumChannel > channel)
Hold an unsigned integer type.
double fc
center frequency
holds a vector of ns3::NetDevice pointers
Create a server application which waits for input UDP packets and uses the information carried into t...
virtual NetDeviceContainer Install(const WifiPhyHelper &phy, const WifiMacHelper &mac, NodeContainer::Iterator first, NodeContainer::Iterator last) const
Hold together all Wifi-related objects.
Callback< R > MakeCallback(R(T::*memPtr)(void), OBJ objPtr)
void ConnectWithoutContext(std::string path, const CallbackBase &cb)
void Start(Time start)
Arrange for all of the Applications in this container to Start() at the Time given as a parameter...
Parse command-line arguments.
static void Destroy(void)
Execute the events scheduled with ScheduleDestroy().
void SetAttribute(std::string name, const AttributeValue &value)
Record an attribute to be set in each Application after it is is created.
void MonitorSniffRx(Ptr< const Packet > packet, uint16_t channelFreqMhz, WifiTxVector txVector, MpduInfo aMpdu, SignalNoiseDbm signalNoise)
Every class exported by the ns3 library is enclosed in the ns3 namespace.
double fl
lower limit of subband
keep track of a set of node pointers.
Ptr< Application > Get(uint32_t i) const
Get the Ptr
stored in this container at a given index.
void SetMobilityModel(std::string type, std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue(), std::string n8="", const AttributeValue &v8=EmptyAttributeValue(), std::string n9="", const AttributeValue &v9=EmptyAttributeValue())
void Install(std::string nodeName) const
Aggregate implementations of the ns3::Ipv4, ns3::Ipv6, ns3::Udp, and ns3::Tcp classes onto the provid...
manage and create wifi channel objects for the yans model.
void GetAttribute(std::string name, AttributeValue &value) const
Get the value of an attribute, raising fatal errors if unsuccessful.
create MAC layers for a ns3::WifiNetDevice.
void SetErrorRateModel(std::string name, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
The IEEE 802.11 SSID Information Element.
virtual void SetType(std::string type, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue(), std::string n8="", const AttributeValue &v8=EmptyAttributeValue(), std::string n9="", const AttributeValue &v9=EmptyAttributeValue(), std::string n10="", const AttributeValue &v10=EmptyAttributeValue())
static_SpectrumModelWifi5180MHz_initializer()
Helper class used to assign positions and mobility models to nodes.
AttributeValue implementation for Address.
void Stop(Time stop)
Arrange for all of the Applications in this container to Stop() at the Time given as a parameter...
Ipv4InterfaceContainer Assign(const NetDeviceContainer &c)
Assign IP addresses to the net devices specified in the container based on the current network prefix...
AttributeValue implementation for DataRate.
void AddValue(const std::string &name, const std::string &help, T &value)
Add a program argument, assigning to POD.
static void Stop(void)
Tell the Simulator the calling event should be the last one executed.
SignalNoiseDbm structure.
Ptr< Node > Get(uint32_t i) const
Get the Ptr stored in this container at a given index.
virtual void SetPropagationDelayModel(Ptr< PropagationDelayModel > delay)
Set the propagation delay model to be used.
Time Seconds(double value)
Construct a Time in the indicated unit.
AttributeValue implementation for Ssid.
void SetDefault(std::string name, const AttributeValue &value)
void Add(Vector v)
Add a position to the list of positions.
void Parse(int argc, char *argv[])
Parse the program arguments.
A helper class to make life easier while doing simple IPv4 address assignment in scripts.
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer.
void SetPropagationDelay(std::string name, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
void EnablePcap(std::string prefix, Ptr< NetDevice > nd, bool promiscuous=false, bool explicitFilename=false)
Enable pcap output the indicated net device.
void SetPositionAllocator(Ptr< PositionAllocator > allocator)
Set the position allocator which will be used to allocate the initial position of every node initiali...
double fh
upper limit of subband
This class can be used to hold variables of floating point type such as 'double' or 'float'...
class static_SpectrumModelWifi5180MHz_initializer static_SpectrumModelWifi5180MHz_initializer_instance
The building block of a SpectrumModel.
void SetBase(Ipv4Address network, Ipv4Mask mask, Ipv4Address base="0.0.0.1")
Set the base network number, network mask and base address.
Ipv4Address GetAddress(uint32_t i, uint32_t j=0) const
Make it easy to create and manage PHY objects for the spectrum model.