WiMAX Models

This section documents the API of the ns-3 wimax module. More...

Collaboration diagram for WiMAX Models:

Modules
	wimax module tests

Classes
class	ns3::BandwidthManager
	This class manage the bandwidth request and grant mechanism. More...
class	ns3::BandwidthRequestHeader
	This class implements the bandwidth-request mac Header as described by IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems 6.3.2.1.2 Bandwidth request header, page 38. More...
class	ns3::BaseStationNetDevice
	More...
class	ns3::BSLinkManager
	More...
class	ns3::BSScheduler
	More...
class	ns3::BSSchedulerRtps
	This class implements a simple downlink scheduler for rtPS flows. More...
class	ns3::BSSchedulerSimple
	More...
class	ns3::BsServiceFlowManager
	BsServiceFlowManager. More...
class	ns3::BurstProfileManager
	More...
class	ns3::Cid
	Cid class. More...
class	ns3::CidFactory
	This class is used exclusively by the BS to allocate CIDs to new connections. More...
class	ns3::ClassificationRuleVectorTlvValue
	this class implements the classifier descriptor as a tlv vector More...
class	ns3::ConnectionManager
	The same connection manager class serves both for BS and SS though some functions are exclusive to only one of them. More...
class	ns3::CsParameters
	CsParameters class. More...
class	ns3::CsParamVectorTlvValue
	this class implements the convergence sub-layer descriptor as a tlv vector More...
class	ns3::DcdChannelEncodings
	This class implements the DCD channel encodings as described by "IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems" 11.4.1 DCD channel encodings, page 659. More...
class	ns3::DlFramePrefixIe
	This class implements the DL Frame Prefix IE as described by IEEE-802.16 standard. More...
class	ns3::DsaAck
	This class implements the DSA-ACK message described by "IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems" 6.3.2.3.12 DSA-ACK message, page 64. More...
class	ns3::DsaReq
	This class implements the DSA-REQ message described by "IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems" 6.3.2.3.10 DSA-REQ message, page 62. More...
class	ns3::DsaRsp
	This class implements the DSA-RSP message described by "IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems" 6.3.2.3.11 DSA-RSP message, page 63 More...
class	ns3::FragmentationSubheader
	This class implements the fragmentation sub-header as described by IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems 6.3.2.2.1 Fragmentation subheader, page 39. More...
class	ns3::GenericMacHeader
	This class implements the Generic mac Header as described by IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems 6.3.2.1.1 Generic MAC header, page 36. More...
class	ns3::GrantManagementSubheader
	This class implements the grant management sub-header as described by IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems 6.3.2.2.2 Grant Management subheader, page 40. More...
class	ns3::IpcsClassifier
	More...
class	ns3::IpcsClassifierRecord
	IpcsClassifierRecord class. More...
class	ns3::Ipv4AddressTlvValue
	Ipv4AddressTlvValue class. More...
class	ns3::MacHeaderType
	This class Represents the HT (Header Type) field of generic MAC and bandwidth request headers. More...
class	ns3::ManagementMessageType
	Mac Management messages Section 6.3.2.3 MAC Management messages page 42, Table 14 page 43. More...
class	ns3::PortRangeTlvValue
	PortRangeTlvValue class. More...
class	ns3::ProtocolTlvValue
	ProtocolTlvValue class. More...
class	ns3::RngReq
	This class implements the ranging request message described by "IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems". More...
class	ns3::RngRsp
	This class implements the ranging response message described by "IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems" 6.3.2.3.6 Ranging response (RNG-RSP) message, page 50. More...
class	ns3::SendParams
	The SendParams class defines the parameters with which Send() function of a particular PHY is called. More...
class	ns3::ServiceFlow
	This class implements service flows as described by the IEEE-802.16 standard. More...
class	ns3::ServiceFlowManager
	The same service flow manager class serves both for BS and SS though some functions are exclusive to only one of them. More...
class	ns3::ServiceFlowRecord
	this class implements a structure to manage some parameters and statistics related to a service flow More...
class	ns3::SfVectorTlvValue
	SfVectorTlvValue class. More...
class	ns3::simpleOfdmSendParam
	simpleOfdmSendParam class More...
class	ns3::SimpleOfdmWimaxChannel
	SimpleOfdmWimaxChannel class. More...
class	ns3::SimpleOfdmWimaxPhy
	SimpleOfdmWimaxPhy class. More...
class	ns3::SNRToBlockErrorRateManager
	This class handles the SNR to BlcER traces. More...
class	ns3::SNRToBlockErrorRateRecord
	This class represents a record (handled by SnrToBlockErrorRate manager) that keeps a mapping between an SNR value and its corresponding (1) Bit Error Rate, (2) Block Error Rate, (3) Standard deviation, (4 and 5) confidence interval. More...
class	ns3::SSLinkManager
	this class implements the link manager of subscriber station net device. More...
class	ns3::SSManager
	this class manages a list of SSrecords More...
class	ns3::SSRecord
	This class is used by the base station to store some information related to subscriber station in the cell. More...
class	ns3::SSScheduler
	More...
class	ns3::SsServiceFlowManager
	SsServiceFlowManager class. More...
class	ns3::SubscriberStationNetDevice
	SubscriberStationNetDevice subclass of WimaxNetDevice. More...
class	ns3::Tlv
	This class implements the Type-Len-Value structure channel encodings as described by "IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems". More...
class	ns3::TlvValue
	The value field of a tlv can take different values (uint8_t, uint16, vector, ...). More...
class	ns3::TosTlvValue
	TosTlvValue class. More...
class	ns3::U16TlvValue
	U16TlvValue class. More...
class	ns3::U32TlvValue
	U32TlvValue class. More...
class	ns3::U8TlvValue
	U8TlvValue class. More...
class	ns3::UcdChannelEncodings
	This class implements the UCD channel encodings as described by "IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems" 11.3.1 UCD channel encodings, page 651. More...
class	ns3::UlJob
	this class implements a structure to compute the priority of service flows More...
class	ns3::UplinkScheduler
	Virtual class for uplink scheduler. More...
class	ns3::UplinkSchedulerMBQoS
	This class implements a Migration-based Quality of Service uplink scheduler(MBQoS). More...
class	ns3::UplinkSchedulerRtps
	This class implements a simple uplink scheduler for rtPS flows. More...
class	ns3::UplinkSchedulerSimple
	More...
class	ns3::VectorTlvValue
	this class is used to implement a vector of values in one tlv value field More...
class	ns3::WimaxChannel
	The channel object to attach Wimax NetDevices. More...
class	ns3::WimaxConnection
	Class to represent WiMAX connections. More...
class	ns3::WimaxMacQueue
	Class implementing the device packet queue. More...
class	ns3::WimaxMacToMacHeader
	this class implements the mac to mac header needed to dump a wimax pcap file The header format was reverse-engineered by looking at existing live pcap traces which could be opened with wireshark i.e., we have no idea where this is coming from. More...
class	ns3::WimaxNetDevice
	Hold together all WiMAX-related objects in a NetDevice. More...
class	ns3::WimaxPhy
	More...

Detailed Description

This section documents the API of the ns-3 wimax module.

For a generic functional description, please refer to the ns-3 manual.