|
A Discrete-Event Network Simulator
|
API
|
Go to the documentation of this file.
25 #include <ns3/nstime.h>
26 #include <ns3/callback.h>
27 #include <ns3/config.h>
28 #include <ns3/boolean.h>
29 #include <ns3/double.h>
30 #include <ns3/uinteger.h>
31 #include <ns3/simulator.h>
33 #include <ns3/node-container.h>
34 #include <ns3/net-device-container.h>
35 #include <ns3/ipv4-interface-container.h>
37 #include <ns3/lte-helper.h>
38 #include <ns3/point-to-point-epc-helper.h>
39 #include <ns3/internet-stack-helper.h>
40 #include <ns3/point-to-point-helper.h>
41 #include <ns3/ipv4-address-helper.h>
42 #include <ns3/ipv4-static-routing-helper.h>
43 #include <ns3/mobility-helper.h>
45 #include <ns3/data-rate.h>
46 #include <ns3/ipv4-static-routing.h>
47 #include <ns3/position-allocator.h>
48 #include <ns3/lte-enb-net-device.h>
49 #include <ns3/lte-enb-phy.h>
91 uint8_t gridSizeX, uint8_t gridSizeY,
92 uint16_t sourceCellId, uint16_t targetCellId,
93 std::string handoverAlgorithmType);
110 void HandoverStartCallback (std::string context, uint64_t imsi,
111 uint16_t sourceCellId, uint16_t rnti,
112 uint16_t targetCellId);
118 void CellShutdownCallback ();
125 virtual void DoRun ();
131 virtual void DoTeardown ();
148 uint8_t gridSizeX, uint8_t gridSizeY,
149 uint16_t sourceCellId, uint16_t targetCellId,
150 std::string handoverAlgorithmType)
152 m_uePosition (uePosition),
153 m_gridSizeX (gridSizeX),
154 m_gridSizeY (gridSizeY),
155 m_sourceCellId (sourceCellId),
156 m_targetCellId (targetCellId),
157 m_handoverAlgorithmType (handoverAlgorithmType),
159 m_hasHandoverOccurred (false)
165 uint16_t nEnb = gridSizeX * gridSizeY;
167 if (sourceCellId > nEnb)
172 if (targetCellId > nEnb)
187 uint16_t sourceCellId, uint16_t rnti,
188 uint16_t targetCellId)
190 NS_LOG_FUNCTION (
this << context << imsi << sourceCellId << rnti << targetCellId);
194 "Handover occurred but too early");
196 "Handover occurred but with wrong source cell");
198 "Handover occurred but with wrong target cell");
232 StringValue (
"ns3::FriisSpectrumPropagationLossModel"));
288 enbMobility.
Install (enbNodes);
303 remoteHostContainer.
Create (1);
306 internet.
Install (remoteHostContainer);
315 ipv4h.
SetBase (
"1.0.0.0",
"255.0.0.0");
335 for (uint32_t u = 0; u < ueNodes.
GetN (); ++u)
358 lteHelper->
Attach (ueDevs.
Get (0), sourceEnb);
361 Simulator::Schedule (
Seconds (0.5),
367 Simulator::Destroy ();
397 :
TestSuite (
"lte-handover-target", SYSTEM)
413 Vector (20, 40, 0), 2, 2, 1, 3,
414 "ns3::A2A4RsrqHandoverAlgorithm"),
417 Vector (20, 40, 0), 2, 2, 1, 3,
418 "ns3::A3RsrpHandoverAlgorithm"),
428 Vector (150, 90, 0), 3, 2, 5, 2,
429 "ns3::A2A4RsrqHandoverAlgorithm"),
430 TestCase::EXTENSIVE);
432 Vector (150, 90, 0), 3, 2, 5, 2,
433 "ns3::A3RsrpHandoverAlgorithm"),
434 TestCase::EXTENSIVE);
holds a vector of ns3::NetDevice pointers
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name.
AttributeValue implementation for DataRate.
void AddTestCase(TestCase *testCase, TestDuration duration=QUICK)
Add an individual child TestCase to this test suite.
void Add(Vector v)
Add a position to the list of positions.
#define NS_ASSERT(condition)
At runtime, in debugging builds, if this condition is not true, the program prints the source file,...
AttributeValue implementation for Boolean.
virtual Ptr< Node > GetPgwNode() const
Get the PGW node.
uint16_t GetCellId() const
bool m_hasHandoverOccurred
has handover occurred?
Every class exported by the ns3 library is enclosed in the ns3 namespace.
A helper class to make life easier while doing simple IPv4 address assignment in scripts.
void SetMobilityModel(std::string type, std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue(), std::string n8="", const AttributeValue &v8=EmptyAttributeValue(), std::string n9="", const AttributeValue &v9=EmptyAttributeValue())
void Install(Ptr< Node > node) const
"Layout" a single node according to the current position allocator type.
void SetDeviceAttribute(std::string name, const AttributeValue &value)
Set an attribute value to be propagated to each NetDevice created by the helper.
NetDeviceContainer InstallEnbDevice(NodeContainer c)
Create a set of eNodeB devices.
void SetChannelAttribute(std::string name, const AttributeValue &value)
Set an attribute value to be propagated to each Channel created by the helper.
Ptr< T > GetObject(void) const
Get a pointer to the requested aggregated Object.
NetDeviceContainer InstallUeDevice(NodeContainer c)
Create a set of UE devices.
std::string GetName(void) const
LteHandoverTargetTestCase(std::string name, Vector uePosition, uint8_t gridSizeX, uint8_t gridSizeY, uint16_t sourceCellId, uint16_t targetCellId, std::string handoverAlgorithmType)
Construct a new test case and providing input parameters for the simulation.
NetDeviceContainer Install(NodeContainer c)
Ipv4 addresses are stored in host order in this class.
uint8_t m_gridSizeY
Y grid size.
void SetDefaultRoute(Ipv4Address nextHop, uint32_t interface, uint32_t metric=0)
Add a default route to the static routing table.
uint32_t GetN(void) const
Get the number of Ptr<Node> stored in this container.
void SetAttribute(std::string name, const AttributeValue &value)
Set a single attribute, raising fatal errors if unsuccessful.
Test suite lte-handover-target, verifying that handover algorithms are able to select the right targe...
This class can be used to hold variables of floating point type such as 'double' or 'float'.
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer.
Ptr< LteEnbPhy > GetPhy(void) const
virtual Ipv4Address GetUeDefaultGatewayAddress()
void AddX2Interface(NodeContainer enbNodes)
Create an X2 interface between all the eNBs in a given set.
void SetBase(Ipv4Address network, Ipv4Mask mask, Ipv4Address base="0.0.0.1")
Set the base network number, network mask and base address.
Access to the IPv4 forwarding table, interfaces, and configuration.
Helper class that adds ns3::Ipv4StaticRouting objects.
#define NS_FATAL_ERROR(msg)
Report a fatal error with a message and terminate.
Class for representing data rates.
static LteHandoverTargetTestSuite g_lteHandoverTargetTestSuiteInstance
uint8_t m_gridSizeX
X grid size.
Ptr< Ipv4StaticRouting > GetStaticRouting(Ptr< Ipv4 > ipv4) const
Try and find the static routing protocol as either the main routing protocol or in the list of routin...
Time Now(void)
create an ns3::Time instance which contains the current simulation time.
void SetPositionAllocator(Ptr< PositionAllocator > allocator)
Set the position allocator which will be used to allocate the initial position of every node initiali...
void CellShutdownCallback()
A trigger that can be scheduled to "shutdown" the cell pointed by m_sourceCellId by reducing its powe...
void SetEpcHelper(Ptr< EpcHelper > h)
Set the EpcHelper to be used to setup the EPC network in conjunction with the setup of the LTE radio ...
void Install(std::string nodeName) const
Aggregate implementations of the ns3::Ipv4, ns3::Ipv6, ns3::Udp, and ns3::Tcp classes onto the provid...
virtual Ipv4InterfaceContainer AssignUeIpv4Address(NetDeviceContainer ueDevices)
Assign IPv4 addresses to UE devices.
#define NS_LOG_INFO(msg)
Use NS_LOG to output a message of level LOG_INFO.
Time MilliSeconds(uint64_t value)
Construct a Time in the indicated unit.
holds a vector of std::pair of Ptr<Ipv4> and interface index.
Ptr< Node > Get(uint32_t i) const
Get the Ptr<Node> stored in this container at a given index.
void SetHandoverAlgorithmAttribute(std::string n, const AttributeValue &v)
Set an attribute for the handover algorithm to be created.
Testing a handover algorithm, verifying that it selects the right target cell when more than one opti...
Callback< R, Ts... > MakeCallback(R(T::*memPtr)(Ts...), OBJ objPtr)
Build Callbacks for class method members which take varying numbers of arguments and potentially retu...
virtual ~LteHandoverTargetTestCase()
Hold variables of type string.
int64_t GetMilliSeconds(void) const
Get an approximation of the time stored in this instance in the indicated unit.
Vector m_uePosition
UE positions.
#define NS_TEST_ASSERT_MSG_EQ(actual, limit, msg)
Test that an actual and expected (limit) value are equal and report and abort if not.
void Connect(std::string path, const CallbackBase &cb)
void SetHandoverAlgorithmType(std::string type)
Set the type of handover algorithm to be used by eNodeB devices.
Time Seconds(double value)
Construct a Time in the indicated unit.
Ipv4InterfaceContainer Assign(const NetDeviceContainer &c)
Assign IP addresses to the net devices specified in the container based on the current network prefix...
#define NS_TEST_ASSERT_MSG_GT(actual, limit, msg)
Test that an actual value is greater than a limit and report and abort if not.
LteHandoverTargetTestSuite()
AttributeValue implementation for Time.
#define NS_LOG_FUNCTION(parameters)
If log level LOG_FUNCTION is enabled, this macro will output all input parameters separated by ",...
Build a set of PointToPointNetDevice objects.
keep track of a set of node pointers.
a class to represent an Ipv4 address mask
void AddNetworkRouteTo(Ipv4Address network, Ipv4Mask networkMask, Ipv4Address nextHop, uint32_t interface, uint32_t metric=0)
Add a network route to the static routing table.
void Attach(NetDeviceContainer ueDevices)
Enables automatic attachment of a set of UE devices to a suitable cell using Idle mode initial cell s...
Hold an unsigned integer type.
void HandoverStartCallback(std::string context, uint64_t imsi, uint16_t sourceCellId, uint16_t rnti, uint16_t targetCellId)
Triggers when an eNodeB starts a handover and then verifies that the handover has the right source an...
void SetDefault(std::string name, const AttributeValue &value)
uint16_t m_targetCellId
target cell ID
virtual void DoRun()
Run a simulation of a micro-cell network using the parameters provided to the constructor function.
aggregate IP/TCP/UDP functionality to existing Nodes.
Ptr< NetDevice > Get(uint32_t i) const
Get the Ptr<NetDevice> stored in this container at a given index.
Ptr< LteEnbNetDevice > m_sourceEnbDev
source ENB device
The eNodeB device implementation.
Helper class used to assign positions and mobility models to nodes.
uint16_t m_sourceCellId
source cell ID
virtual void DoTeardown()
Called at the end of simulation and verifies that a handover has occurred in the simulation.
std::string m_handoverAlgorithmType
handover algorithm type