csma-bridge-one-hop.cc

Go to the documentation of this file.

/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation;
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 
// Network topology
//
//         bridge1         The node named bridge1 (node 5 in the nodelist)
//   ------------------        has three CSMA net devices that are bridged
//   CSMA   CSMA   CSMA        together using a BridgeNetDevice.
//     |      |      |
//     |      |      |     The bridge node talks over three CSMA channels
//     |      |      |
//   CSMA   CSMA   CSMA    to three other CSMA net devices
//   ----   ----   ----
//    n0     n1     n2     Node two acts as a router and talks to another
//                 ----        bridge that connects the remaining nodes.
//                 CSMA
//                   |
//    n3     n4      |
//   ----   ----     |
//   CSMA   CSMA     |
//     |      |      |
//     |      |      |
//     |      |      |
//   CSMA   CSMA   CSMA    The node named bridge2 (node 6 in the nodelist)
//   ------------------        has three CSMA net devices that are bridged
//        bridge2              together using a BridgeNetDevice.
//
// Or, more abstractly, recognizing that bridge 1 and bridge 2 are nodes
// with three net devices:
//
//        n0     n1                (n0 = 10.1.1.2)
//        |      |                 (n1 = 10.1.1.3)  Note odd addressing
//       -----------               (n2 = 10.1.1.1)
//       | bridge1 | <- n5
//       -----------
//           |
//         router    <- n2
//           |
//       -----------
//       | bridge2 | <- n6
//       -----------               (n2 = 10.1.2.1)
//        |      |                 (n3 = 10.1.2.2)
//        n3     n4                (n4 = 10.1.2.3)
//
// So, this example shows two broadcast domains, each interconnected by a bridge
// with a router node (n2) interconnecting the layer-2 broadcast domains
//
// It is meant to mirror somewhat the csma-bridge example but adds another
// bridged link separated by a router.
//
// - CBR/UDP flows from n0 (10.1.1.2) to n1 (10.1.1.3) and from n3 (10.1.2.2) to n0 (10.1.1.3)
// - DropTail queues
// - Global static routing
// - Tracing of queues and packet receptions to file "csma-bridge-one-hop.tr"
 
#include "ns3/applications-module.h"
#include "ns3/bridge-module.h"
#include "ns3/core-module.h"
#include "ns3/csma-module.h"
#include "ns3/internet-module.h"
#include "ns3/network-module.h"
 
#include <fstream>
#include <iostream>
 
using namespace ns3;
 
NS_LOG_COMPONENT_DEFINE("CsmaBridgeOneHopExample");
 
int
main(int argc, char* argv[])
{
    //
    // Users may find it convenient to turn on explicit debugging
    // for selected modules; the below lines suggest how to do this
    //
#if 0
  LogComponentEnable ("CsmaBridgeOneHopExample", LOG_LEVEL_INFO);
#endif
 
    //
    // Allow the user to override any of the defaults and the above Bind() at
    // run-time, via command-line arguments
    //
    CommandLine cmd(__FILE__);
    cmd.Parse(argc, argv);
 
    //
    // Explicitly create the nodes required by the topology (shown above).
    //
    NS_LOG_INFO("Create nodes.");
 
    Ptr<Node> n0 = CreateObject<Node>();
    Ptr<Node> n1 = CreateObject<Node>();
    Ptr<Node> n2 = CreateObject<Node>();
    Ptr<Node> n3 = CreateObject<Node>();
    Ptr<Node> n4 = CreateObject<Node>();
 
    Ptr<Node> bridge1 = CreateObject<Node>();
    Ptr<Node> bridge2 = CreateObject<Node>();
 
    NS_LOG_INFO("Build Topology");
    CsmaHelper csma;
    csma.SetChannelAttribute("DataRate", DataRateValue(5000000));
    csma.SetChannelAttribute("Delay", TimeValue(MilliSeconds(2)));
 
    // Create the csma links, from each terminal to the bridge
    // This will create six network devices; we'll keep track separately
    // of the devices on and off the bridge respectively, for later configuration
    NetDeviceContainer topLanDevices;
    NetDeviceContainer topBridgeDevices;
 
    // It is easier to iterate the nodes in C++ if we put them into a container
    NodeContainer topLan(n2, n0, n1);
 
    for (int i = 0; i < 3; i++)
    {
        // install a csma channel between the ith toplan node and the bridge node
        NetDeviceContainer link = csma.Install(NodeContainer(topLan.Get(i), bridge1));
        topLanDevices.Add(link.Get(0));
        topBridgeDevices.Add(link.Get(1));
    }
 
    //
    // Now, Create the bridge netdevice, which will do the packet switching.  The
    // bridge lives on the node bridge1 and bridges together the topBridgeDevices
    // which are the three CSMA net devices on the node in the diagram above.
    //
    BridgeHelper bridge;
    bridge.Install(bridge1, topBridgeDevices);
 
    // Add internet stack to the router nodes
    NodeContainer routerNodes(n0, n1, n2, n3, n4);
    InternetStackHelper internet;
    internet.Install(routerNodes);
 
    // Repeat for bottom bridged LAN
    NetDeviceContainer bottomLanDevices;
    NetDeviceContainer bottomBridgeDevices;
    NodeContainer bottomLan(n2, n3, n4);
    for (int i = 0; i < 3; i++)
    {
        NetDeviceContainer link = csma.Install(NodeContainer(bottomLan.Get(i), bridge2));
        bottomLanDevices.Add(link.Get(0));
        bottomBridgeDevices.Add(link.Get(1));
    }
    bridge.Install(bridge2, bottomBridgeDevices);
 
    // We've got the "hardware" in place.  Now we need to add IP addresses.
    NS_LOG_INFO("Assign IP Addresses.");
    Ipv4AddressHelper ipv4;
    ipv4.SetBase("10.1.1.0", "255.255.255.0");
    ipv4.Assign(topLanDevices);
    ipv4.SetBase("10.1.2.0", "255.255.255.0");
    ipv4.Assign(bottomLanDevices);
 
    //
    // Create router nodes, initialize routing database and set up the routing
    // tables in the nodes.  We excuse the bridge nodes from having to serve as
    // routers, since they don't even have internet stacks on them.
    //
    Ipv4GlobalRoutingHelper::PopulateRoutingTables();
 
    //
    // Create an OnOff application to send UDP datagrams from node zero to node 1.
    //
    NS_LOG_INFO("Create Applications.");
    uint16_t port = 9; // Discard port (RFC 863)
 
    OnOffHelper onoff("ns3::UdpSocketFactory",
                      Address(InetSocketAddress(Ipv4Address("10.1.1.3"), port)));
    onoff.SetConstantRate(DataRate("500kb/s"));
 
    ApplicationContainer app = onoff.Install(n0);
    // Start the application
    app.Start(Seconds(1.0));
    app.Stop(Seconds(10.0));
 
    // Create an optional packet sink to receive these packets
    PacketSinkHelper sink("ns3::UdpSocketFactory",
                          Address(InetSocketAddress(Ipv4Address::GetAny(), port)));
    ApplicationContainer sink1 = sink.Install(n1);
    sink1.Start(Seconds(1.0));
    sink1.Stop(Seconds(10.0));
 
    //
    // Create a similar flow from n3 to n0, starting at time 1.1 seconds
    //
    onoff.SetAttribute("Remote", AddressValue(InetSocketAddress(Ipv4Address("10.1.1.2"), port)));
    ApplicationContainer app2 = onoff.Install(n3);
    app2.Start(Seconds(1.1));
    app2.Stop(Seconds(10.0));
 
    ApplicationContainer sink2 = sink.Install(n0);
    sink2.Start(Seconds(1.1));
    sink2.Stop(Seconds(10.0));
 
    NS_LOG_INFO("Configure Tracing.");
 
    //
    // Configure tracing of all enqueue, dequeue, and NetDevice receive events.
    // Trace output will be sent to the file "csma-bridge-one-hop.tr"
    //
    AsciiTraceHelper ascii;
    csma.EnableAsciiAll(ascii.CreateFileStream("csma-bridge-one-hop.tr"));
 
    //
    // Also configure some tcpdump traces; each interface will be traced.
    // The output files will be named:
    //     csma-bridge-one-hop-<nodeId>-<interfaceId>.pcap
    // and can be read by the "tcpdump -r" command (use "-tt" option to
    // display timestamps correctly)
    //
    csma.EnablePcapAll("csma-bridge-one-hop", false);
 
    //
    // Now, do the actual simulation.
    //
    NS_LOG_INFO("Run Simulation.");
    Simulator::Run();
    Simulator::Destroy();
    NS_LOG_INFO("Done.");
 
    return 0;
}