lr-wpan-phy.cc

Go to the documentation of this file.

/*
 * Copyright (c) 2011 The Boeing Company
 *
 * SPDX-License-Identifier: GPL-2.0-only
 *
 * Author:
 *  Gary Pei <guangyu.pei@boeing.com>
 *  Sascha Alexander Jopen <jopen@cs.uni-bonn.de>
 */
#include "lr-wpan-phy.h"
 
#include "lr-wpan-constants.h"
#include "lr-wpan-error-model.h"
#include "lr-wpan-lqi-tag.h"
#include "lr-wpan-net-device.h"
#include "lr-wpan-spectrum-signal-parameters.h"
#include "lr-wpan-spectrum-value-helper.h"
 
#include "ns3/abort.h"
#include "ns3/antenna-model.h"
#include "ns3/double.h"
#include "ns3/error-model.h"
#include "ns3/log.h"
#include "ns3/mobility-model.h"
#include "ns3/net-device.h"
#include "ns3/node.h"
#include "ns3/packet-burst.h"
#include "ns3/packet.h"
#include "ns3/pointer.h"
#include "ns3/random-variable-stream.h"
#include "ns3/simulator.h"
#include "ns3/spectrum-channel.h"
#include "ns3/spectrum-value.h"
 
namespace ns3
{
namespace lrwpan
{
 
NS_LOG_COMPONENT_DEFINE("LrWpanPhy");
NS_OBJECT_ENSURE_REGISTERED(LrWpanPhy);
 
/**
 * The data and symbol rates for the different PHY options.
 * See Table 1 in section 6.1.1 IEEE 802.15.4-2006, IEEE 802.15.4c-2009, IEEE 802.15.4d-2009.
 * Bit rate is in kbit/s.  Symbol rate is in ksymbol/s.
 * The index follows LrWpanPhyOption (kb/s and ksymbol/s)
 */
static const PhyDataAndSymbolRates dataSymbolRates[IEEE_802_15_4_INVALID_PHY_OPTION]{
    {20.0, 20.0},
    {40.0, 40.0},
    {20.0, 20.0},
    {250.0, 12.5},
    {250.0, 50.0},
    {250.0, 62.5},
    {100.0, 25.0},
    {250.0, 62.5},
    {250.0, 62.5},
};
 
/**
 * The preamble, SFD, and PHR lengths in symbols for the different PHY options.
 * See Table 19 and Table 20 in section 6.3 IEEE 802.15.4-2006, IEEE 802.15.4c-2009, IEEE
 * 802.15.4d-2009.
 * The PHR is 1 octet and it follows phySymbolsPerOctet in Table 23.
 * The index follows LrWpanPhyOption.
 */
const PhyPpduHeaderSymbolNumber ppduHeaderSymbolNumbers[IEEE_802_15_4_INVALID_PHY_OPTION]{
    {32.0, 8.0, 8.0},
    {32.0, 8.0, 8.0},
    {32.0, 8.0, 8.0},
    {2.0, 1.0, 0.4},
    {6.0, 1.0, 1.6},
    {8.0, 2.0, 2.0},
    {8.0, 2.0, 2.0},
    {8.0, 2.0, 2.0},
    {8.0, 2.0, 2.0},
};
 
std::ostream&
operator<<(std::ostream& os, const PhyEnumeration& state)
{
    switch (state)
    {
    case PhyEnumeration::IEEE_802_15_4_PHY_BUSY:
        os << "BUSY";
        break;
    case PhyEnumeration::IEEE_802_15_4_PHY_BUSY_RX:
        os << "BUSY_RX";
        break;
    case PhyEnumeration::IEEE_802_15_4_PHY_BUSY_TX:
        os << "BUSY_TX";
        break;
    case PhyEnumeration::IEEE_802_15_4_PHY_FORCE_TRX_OFF:
        os << "FORCE_TRX_OFF";
        break;
    case PhyEnumeration::IEEE_802_15_4_PHY_IDLE:
        os << "IDLE";
        break;
    case PhyEnumeration::IEEE_802_15_4_PHY_INVALID_PARAMETER:
        os << "INVALID_PARAMETER";
        break;
    case PhyEnumeration::IEEE_802_15_4_PHY_RX_ON:
        os << "RX_ON";
        break;
    case PhyEnumeration::IEEE_802_15_4_PHY_SUCCESS:
        os << "SUCCESS";
        break;
    case PhyEnumeration::IEEE_802_15_4_PHY_TRX_OFF:
        os << "TRX_OFF";
        break;
    case PhyEnumeration::IEEE_802_15_4_PHY_TX_ON:
        os << "TX_ON";
        break;
    case PhyEnumeration::IEEE_802_15_4_PHY_UNSUPPORTED_ATTRIBUTE:
        os << "UNSUPPORTED";
        break;
    case PhyEnumeration::IEEE_802_15_4_PHY_READ_ONLY:
        os << "READ_ONLY";
        break;
    case PhyEnumeration::IEEE_802_15_4_PHY_UNSPECIFIED:
        os << "UNSPECIFIED";
        break;
    }
    return os;
}
 
std::ostream&
operator<<(std::ostream& os, const TracedValue<PhyEnumeration>& state)
{
    PhyEnumeration s = state;
    return os << s;
}
 
TypeId
LrWpanPhy::GetTypeId()
{
    static TypeId tid =
        TypeId("ns3::lrwpan::LrWpanPhy")
            .AddDeprecatedName("ns3::LrWpanPhy")
            .SetParent<SpectrumPhy>()
            .SetGroupName("LrWpan")
            .AddConstructor<LrWpanPhy>()
            .AddAttribute("PostReceptionErrorModel",
                          "An optional packet error model can be added to the receive "
                          "packet process after any propagation-based (SNR-based) error "
                          "models have been applied. Typically this is used to force "
                          "specific packet drops, for testing purposes.",
                          PointerValue(),
                          MakePointerAccessor(&LrWpanPhy::m_postReceptionErrorModel),
                          MakePointerChecker<ErrorModel>())
            .AddTraceSource("TrxStateValue",
                            "The state of the transceiver",
                            MakeTraceSourceAccessor(&LrWpanPhy::m_trxState),
                            "ns3::TracedValueCallback::LrWpanPhyEnumeration")
            .AddTraceSource("TrxState",
                            "The state of the transceiver",
                            MakeTraceSourceAccessor(&LrWpanPhy::m_trxStateLogger),
                            "ns3::lrwpan::LrWpanPhy::StateTracedCallback")
            .AddTraceSource("PhyTxBegin",
                            "Trace source indicating a packet has "
                            "begun transmitting over the channel medium",
                            MakeTraceSourceAccessor(&LrWpanPhy::m_phyTxBeginTrace),
                            "ns3::Packet::TracedCallback")
            .AddTraceSource("PhyTxEnd",
                            "Trace source indicating a packet has been "
                            "completely transmitted over the channel.",
                            MakeTraceSourceAccessor(&LrWpanPhy::m_phyTxEndTrace),
                            "ns3::Packet::TracedCallback")
            .AddTraceSource("PhyTxDrop",
                            "Trace source indicating a packet has been "
                            "dropped by the device during transmission",
                            MakeTraceSourceAccessor(&LrWpanPhy::m_phyTxDropTrace),
                            "ns3::Packet::TracedCallback")
            .AddTraceSource("PhyRxBegin",
                            "Trace source indicating a packet has begun "
                            "being received from the channel medium by the device",
                            MakeTraceSourceAccessor(&LrWpanPhy::m_phyRxBeginTrace),
                            "ns3::Packet::TracedCallback")
            .AddTraceSource("PhyRxEnd",
                            "Trace source indicating a packet has been "
                            "completely received from the channel medium "
                            "by the device",
                            MakeTraceSourceAccessor(&LrWpanPhy::m_phyRxEndTrace),
                            "ns3::Packet::SinrTracedCallback")
            .AddTraceSource("PhyRxDrop",
                            "Trace source indicating a packet has been "
                            "dropped by the device during reception",
                            MakeTraceSourceAccessor(&LrWpanPhy::m_phyRxDropTrace),
                            "ns3::Packet::TracedCallback");
    return tid;
}
 
LrWpanPhy::LrWpanPhy()
    : m_edRequest(),
      m_setTRXState()
{
    m_trxState = IEEE_802_15_4_PHY_TRX_OFF;
    m_trxStatePending = IEEE_802_15_4_PHY_IDLE;
 
    // default PHY PIB attributes
    m_phyPIBAttributes.phyTransmitPower = 0;
    m_phyPIBAttributes.phyCCAMode = 1;
 
    SetPhyOption(IEEE_802_15_4_2_4GHZ_OQPSK);
 
    m_random = CreateObject<UniformRandomVariable>();
    m_random->SetAttribute("Min", DoubleValue(0.0));
    m_random->SetAttribute("Max", DoubleValue(1.0));
 
    m_isRxCanceled = false;
    ChangeTrxState(IEEE_802_15_4_PHY_TRX_OFF);
}
 
LrWpanPhy::~LrWpanPhy()
{
}
 
void
LrWpanPhy::DoInitialize()
{
    NS_LOG_FUNCTION(this);
 
    // This method ensures that the local mobility model pointer holds
    // a pointer to the Node's aggregated mobility model (if one exists)
    // in the case that the user has not directly called SetMobility()
    // on this LrWpanPhy during simulation setup.  If the mobility model
    // needs to be added or changed during simulation runtime, users must
    // call SetMobility() on this object.
 
    if (!m_mobility)
    {
        NS_ABORT_MSG_UNLESS(m_device && m_device->GetNode(),
                            "Either install a MobilityModel on this object or ensure that this "
                            "object is part of a Node and NetDevice");
        m_mobility = m_device->GetNode()->GetObject<MobilityModel>();
        if (!m_mobility)
        {
            NS_LOG_WARN("Mobility not found, propagation models might not work properly");
        }
    }
}
 
void
LrWpanPhy::DoDispose()
{
    NS_LOG_FUNCTION(this);
 
    // Cancel pending transceiver state change, if one is in progress.
    m_setTRXState.Cancel();
    m_trxState = IEEE_802_15_4_PHY_TRX_OFF;
    m_trxStatePending = IEEE_802_15_4_PHY_IDLE;
 
    m_mobility = nullptr;
    m_device = nullptr;
    m_channel = nullptr;
    m_antenna = nullptr;
    m_txPsd = nullptr;
    m_noise = nullptr;
    m_signal = nullptr;
    m_errorModel = nullptr;
    m_currentRxPacket.first = nullptr;
    m_currentTxPacket.first = nullptr;
    m_postReceptionErrorModel = nullptr;
 
    m_ccaRequest.Cancel();
    m_edRequest.Cancel();
    m_setTRXState.Cancel();
    m_pdDataRequest.Cancel();
 
    m_random = nullptr;
    m_pdDataIndicationCallback = MakeNullCallback<void, uint32_t, Ptr<Packet>, uint8_t>();
    m_pdDataConfirmCallback = MakeNullCallback<void, PhyEnumeration>();
    m_plmeCcaConfirmCallback = MakeNullCallback<void, PhyEnumeration>();
    m_plmeEdConfirmCallback = MakeNullCallback<void, PhyEnumeration, uint8_t>();
    m_plmeGetAttributeConfirmCallback =
        MakeNullCallback<void, PhyEnumeration, PhyPibAttributeIdentifier, Ptr<PhyPibAttributes>>();
    m_plmeSetTRXStateConfirmCallback = MakeNullCallback<void, PhyEnumeration>();
    m_plmeSetAttributeConfirmCallback =
        MakeNullCallback<void, PhyEnumeration, PhyPibAttributeIdentifier>();
 
    SpectrumPhy::DoDispose();
}
 
Ptr<NetDevice>
LrWpanPhy::GetDevice() const
{
    return m_device;
}
 
Ptr<MobilityModel>
LrWpanPhy::GetMobility() const
{
    return m_mobility;
}
 
void
LrWpanPhy::SetDevice(Ptr<NetDevice> d)
{
    NS_LOG_FUNCTION(this << d);
    m_device = d;
}
 
void
LrWpanPhy::SetMobility(Ptr<MobilityModel> m)
{
    NS_LOG_FUNCTION(this << m);
    m_mobility = m;
}
 
void
LrWpanPhy::SetChannel(Ptr<SpectrumChannel> c)
{
    NS_LOG_FUNCTION(this << c);
    m_channel = c;
}
 
Ptr<SpectrumChannel>
LrWpanPhy::GetChannel()
{
    NS_LOG_FUNCTION(this);
    return m_channel;
}
 
Ptr<const SpectrumModel>
LrWpanPhy::GetRxSpectrumModel() const
{
    NS_LOG_FUNCTION(this);
    if (m_txPsd)
    {
        return m_txPsd->GetSpectrumModel();
    }
    else
    {
        return nullptr;
    }
}
 
Ptr<Object>
LrWpanPhy::GetAntenna() const
{
    return m_antenna;
}
 
void
LrWpanPhy::SetAntenna(Ptr<AntennaModel> a)
{
    NS_LOG_FUNCTION(this << a);
    m_antenna = a;
}
 
void
LrWpanPhy::StartRx(Ptr<SpectrumSignalParameters> spectrumRxParams)
{
    NS_LOG_FUNCTION(this << spectrumRxParams);
 
    if (!m_edRequest.IsExpired())
    {
        // Update the average receive power during ED.
        Time now = Simulator::Now();
        m_edPower.averagePower +=
            LrWpanSpectrumValueHelper::TotalAvgPower(m_signal->GetSignalPsd(),
                                                     m_phyPIBAttributes.phyCurrentChannel) *
            (now - m_edPower.lastUpdate).GetTimeStep() / m_edPower.measurementLength.GetTimeStep();
        m_edPower.lastUpdate = now;
    }
 
    Ptr<LrWpanSpectrumSignalParameters> lrWpanRxParams =
        DynamicCast<LrWpanSpectrumSignalParameters>(spectrumRxParams);
 
    if (!lrWpanRxParams)
    {
        CheckInterference();
        m_signal->AddSignal(spectrumRxParams->psd);
 
        // Update peak power if CCA is in progress.
        if (!m_ccaRequest.IsExpired())
        {
            double power =
                LrWpanSpectrumValueHelper::TotalAvgPower(m_signal->GetSignalPsd(),
                                                         m_phyPIBAttributes.phyCurrentChannel);
            if (m_ccaPeakPower < power)
            {
                m_ccaPeakPower = power;
            }
        }
 
        Simulator::Schedule(spectrumRxParams->duration, &LrWpanPhy::EndRx, this, spectrumRxParams);
        return;
    }
 
    Ptr<Packet> p = (lrWpanRxParams->packetBurst->GetPackets()).front();
    NS_ASSERT(p);
 
    // Prevent PHY from receiving another packet while switching the transceiver state.
    if (m_trxState == IEEE_802_15_4_PHY_RX_ON && !m_setTRXState.IsPending())
    {
        // The specification doesn't seem to refer to BUSY_RX, but vendor
        // data sheets suggest that this is a substate of the RX_ON state
        // that is entered after preamble detection when the digital receiver
        // is enabled.  Here, for now, we use BUSY_RX to mark the period between
        // StartRx() and EndRx() states.
 
        // We are going to BUSY_RX state when receiving the first bit of an SHR,
        // as opposed to real receivers, which should go to this state only after
        // successfully receiving the SHR.
 
        // If synchronizing to the packet is possible, change to BUSY_RX state,
        // otherwise drop the packet and stay in RX state. The actual synchronization
        // is not modeled.
 
        // Add any incoming packet to the current interference before checking the
        // SINR.
        NS_LOG_DEBUG(this << " receiving packet with power: "
                          << 10 * log10(LrWpanSpectrumValueHelper::TotalAvgPower(
                                      lrWpanRxParams->psd,
                                      m_phyPIBAttributes.phyCurrentChannel)) +
                                 30
                          << "dBm");
        m_signal->AddSignal(lrWpanRxParams->psd);
        Ptr<SpectrumValue> interferenceAndNoise = m_signal->GetSignalPsd();
        *interferenceAndNoise -= *lrWpanRxParams->psd;
        *interferenceAndNoise += *m_noise;
        double sinr =
            LrWpanSpectrumValueHelper::TotalAvgPower(lrWpanRxParams->psd,
                                                     m_phyPIBAttributes.phyCurrentChannel) /
            LrWpanSpectrumValueHelper::TotalAvgPower(interferenceAndNoise,
                                                     m_phyPIBAttributes.phyCurrentChannel);
 
        // Std. 802.15.4-2006, appendix E, Figure E.2
        // At SNR < -5 the BER is less than 10e-1.
        // It's useless to even *try* to decode the packet.
        if (10 * log10(sinr) > -5)
        {
            ChangeTrxState(IEEE_802_15_4_PHY_BUSY_RX);
            m_currentRxPacket = std::make_pair(lrWpanRxParams, false);
            m_phyRxBeginTrace(p);
 
            m_rxLastUpdate = Simulator::Now();
        }
        else
        {
            m_phyRxDropTrace(p);
        }
    }
    else if (m_trxState == IEEE_802_15_4_PHY_BUSY_RX)
    {
        // Drop the new packet.
        NS_LOG_DEBUG(this << " packet collision");
        m_phyRxDropTrace(p);
 
        // Check if we correctly received the old packet up to now.
        CheckInterference();
 
        // Add the incoming packet to the current interference after we have
        // checked for successful reception of the current packet for the time
        // before the additional interference.
        m_signal->AddSignal(lrWpanRxParams->psd);
    }
    else
    {
        // Simply drop the packet.
        NS_LOG_DEBUG(this << " transceiver not in RX state");
        m_phyRxDropTrace(p);
 
        // Add the signal power to the interference, anyway.
        m_signal->AddSignal(lrWpanRxParams->psd);
    }
 
    // Update peak power if CCA is in progress.
    if (!m_ccaRequest.IsExpired())
    {
        double power =
            LrWpanSpectrumValueHelper::TotalAvgPower(m_signal->GetSignalPsd(),
                                                     m_phyPIBAttributes.phyCurrentChannel);
        if (m_ccaPeakPower < power)
        {
            m_ccaPeakPower = power;
        }
    }
 
    // Always call EndRx to update the interference.
    // We keep track of this event, and if necessary cancel this event when a TX of a packet.
 
    Simulator::Schedule(spectrumRxParams->duration, &LrWpanPhy::EndRx, this, spectrumRxParams);
}
 
void
LrWpanPhy::CheckInterference()
{
    // Calculate whether packet was lost.
    LrWpanSpectrumValueHelper psdHelper;
    Ptr<LrWpanSpectrumSignalParameters> currentRxParams = m_currentRxPacket.first;
 
    // We are currently receiving a packet.
    if (m_trxState == IEEE_802_15_4_PHY_BUSY_RX)
    {
        // NS_ASSERT (currentRxParams && !m_currentRxPacket.second);
 
        Ptr<Packet> currentPacket = currentRxParams->packetBurst->GetPackets().front();
        if (m_errorModel)
        {
            // How many bits did we receive since the last calculation?
            double t = (Simulator::Now() - m_rxLastUpdate).ToDouble(Time::MS);
            uint32_t chunkSize = ceil(t * (GetDataOrSymbolRate(true) / 1000));
            Ptr<SpectrumValue> interferenceAndNoise = m_signal->GetSignalPsd();
            *interferenceAndNoise -= *currentRxParams->psd;
            *interferenceAndNoise += *m_noise;
            double sinr =
                LrWpanSpectrumValueHelper::TotalAvgPower(currentRxParams->psd,
                                                         m_phyPIBAttributes.phyCurrentChannel) /
                LrWpanSpectrumValueHelper::TotalAvgPower(interferenceAndNoise,
                                                         m_phyPIBAttributes.phyCurrentChannel);
            double per = 1.0 - m_errorModel->GetChunkSuccessRate(sinr, chunkSize);
 
            // The LQI is the total packet success rate scaled to 0-255.
            // If not already set, initialize to 255.
            LrWpanLqiTag tag(std::numeric_limits<uint8_t>::max());
            currentPacket->PeekPacketTag(tag);
            uint8_t lqi = tag.Get();
            tag.Set(lqi - (per * lqi));
            currentPacket->ReplacePacketTag(tag);
 
            if (m_random->GetValue() < per)
            {
                // The packet was destroyed, drop the packet after reception.
                m_currentRxPacket.second = true;
            }
        }
        else
        {
            NS_LOG_WARN("Missing ErrorModel");
        }
    }
    m_rxLastUpdate = Simulator::Now();
}
 
void
LrWpanPhy::EndRx(Ptr<SpectrumSignalParameters> par)
{
    NS_LOG_FUNCTION(this);
 
    Ptr<LrWpanSpectrumSignalParameters> params = DynamicCast<LrWpanSpectrumSignalParameters>(par);
 
    if (!m_edRequest.IsExpired())
    {
        // Update the average receive power during ED.
        Time now = Simulator::Now();
        m_edPower.averagePower +=
            LrWpanSpectrumValueHelper::TotalAvgPower(m_signal->GetSignalPsd(),
                                                     m_phyPIBAttributes.phyCurrentChannel) *
            (now - m_edPower.lastUpdate).GetTimeStep() / m_edPower.measurementLength.GetTimeStep();
        m_edPower.lastUpdate = now;
    }
 
    Ptr<LrWpanSpectrumSignalParameters> currentRxParams = m_currentRxPacket.first;
    if (currentRxParams == params)
    {
        CheckInterference();
    }
 
    // Update the interference.
    m_signal->RemoveSignal(par->psd);
 
    if (!params)
    {
        NS_LOG_LOGIC("Node: " << m_device->GetAddress()
                              << " Removing interferent: " << *(par->psd));
        return;
    }
 
    // If this is the end of the currently received packet, check if reception was successful.
    if (currentRxParams == params)
    {
        Ptr<Packet> currentPacket = currentRxParams->packetBurst->GetPackets().front();
        NS_ASSERT(currentPacket);
 
        if (m_postReceptionErrorModel &&
            m_postReceptionErrorModel->IsCorrupt(currentPacket->Copy()))
        {
            NS_LOG_DEBUG("Reception failed due to post-rx error model");
            m_currentRxPacket.second = true;
        }
 
        // If there is no error model attached to the PHY, we always report the maximum LQI value.
        LrWpanLqiTag tag(std::numeric_limits<uint8_t>::max());
        currentPacket->PeekPacketTag(tag);
        m_phyRxEndTrace(currentPacket, tag.Get());
 
        if (!m_currentRxPacket.second)
        {
            m_currentRxPacket = std::make_pair(nullptr, true);
            ChangeTrxState(IEEE_802_15_4_PHY_RX_ON);
            NS_LOG_DEBUG("Packet successfully received");
 
            // The packet was successfully received, push it up the stack.
            if (!m_pdDataIndicationCallback.IsNull())
            {
                m_pdDataIndicationCallback(currentPacket->GetSize(), currentPacket, tag.Get());
            }
        }
        else
        {
            // The packet was destroyed due to interference, post-rx corruption or
            // cancelled, therefore drop it.
            m_phyRxDropTrace(currentPacket);
            m_currentRxPacket = std::make_pair(nullptr, true);
 
            if (!m_isRxCanceled)
            {
                ChangeTrxState(IEEE_802_15_4_PHY_RX_ON);
            }
            else
            {
                // The state of The PHY was already changed when the packet was canceled
                // due to a forced operation.
                m_isRxCanceled = false;
            }
        }
    }
}
 
void
LrWpanPhy::PdDataRequest(const uint32_t psduLength, Ptr<Packet> p)
{
    NS_LOG_FUNCTION(this << psduLength << p);
 
    if (psduLength > lrwpan::aMaxPhyPacketSize)
    {
        if (!m_pdDataConfirmCallback.IsNull())
        {
            m_pdDataConfirmCallback(IEEE_802_15_4_PHY_UNSPECIFIED);
        }
        NS_LOG_DEBUG("Drop packet because psduLength too long: " << psduLength);
        return;
    }
 
    // Prevent PHY from sending a packet while switching the transceiver state.
    if (!m_setTRXState.IsPending())
    {
        if (m_trxState == IEEE_802_15_4_PHY_TX_ON)
        {
            // send down
            NS_ASSERT(m_channel);
 
            // Remove a possible LQI tag from a previous transmission of the packet.
            LrWpanLqiTag lqiTag;
            p->RemovePacketTag(lqiTag);
 
            m_phyTxBeginTrace(p);
            m_currentTxPacket.first = p;
            m_currentTxPacket.second = false;
 
            Ptr<LrWpanSpectrumSignalParameters> txParams = Create<LrWpanSpectrumSignalParameters>();
            txParams->duration = CalculateTxTime(p);
            txParams->txPhy = GetObject<SpectrumPhy>();
            txParams->psd = m_txPsd;
            txParams->txAntenna = m_antenna;
            Ptr<PacketBurst> pb = CreateObject<PacketBurst>();
            pb->AddPacket(p);
            txParams->packetBurst = pb;
            m_channel->StartTx(txParams);
            m_pdDataRequest = Simulator::Schedule(txParams->duration, &LrWpanPhy::EndTx, this);
            ChangeTrxState(IEEE_802_15_4_PHY_BUSY_TX);
            return;
        }
        else if ((m_trxState == IEEE_802_15_4_PHY_RX_ON) ||
                 (m_trxState == IEEE_802_15_4_PHY_TRX_OFF) ||
                 (m_trxState == IEEE_802_15_4_PHY_BUSY_TX))
        {
            if (!m_pdDataConfirmCallback.IsNull())
            {
                m_pdDataConfirmCallback(m_trxState);
            }
            // Drop packet, hit PhyTxDrop trace
            m_phyTxDropTrace(p);
            return;
        }
        else
        {
            NS_FATAL_ERROR("This should be unreachable, or else state "
                           << m_trxState << " should be added as a case");
        }
    }
    else
    {
        // TODO: This error code is not covered by the standard.
        // What is the correct behavior in this case?
        if (!m_pdDataConfirmCallback.IsNull())
        {
            m_pdDataConfirmCallback(IEEE_802_15_4_PHY_UNSPECIFIED);
        }
        // Drop packet, hit PhyTxDrop trace
        m_phyTxDropTrace(p);
        return;
    }
}
 
void
LrWpanPhy::PlmeCcaRequest()
{
    NS_LOG_FUNCTION(this);
 
    if (m_trxState == IEEE_802_15_4_PHY_RX_ON || m_trxState == IEEE_802_15_4_PHY_BUSY_RX)
    {
        m_ccaPeakPower = 0.0;
        Time ccaTime = Seconds(8.0 / GetDataOrSymbolRate(false));
        m_ccaRequest = Simulator::Schedule(ccaTime, &LrWpanPhy::EndCca, this);
    }
    else
    {
        if (!m_plmeCcaConfirmCallback.IsNull())
        {
            if (m_trxState == IEEE_802_15_4_PHY_TRX_OFF)
            {
                m_plmeCcaConfirmCallback(IEEE_802_15_4_PHY_TRX_OFF);
            }
            else
            {
                m_plmeCcaConfirmCallback(IEEE_802_15_4_PHY_BUSY);
            }
        }
    }
}
 
void
LrWpanPhy::CcaCancel()
{
    NS_LOG_FUNCTION(this);
    m_ccaRequest.Cancel();
}
 
void
LrWpanPhy::PlmeEdRequest()
{
    NS_LOG_FUNCTION(this);
    if (m_trxState == IEEE_802_15_4_PHY_RX_ON || m_trxState == IEEE_802_15_4_PHY_BUSY_RX)
    {
        // Average over the powers of all signals received until EndEd()
        m_edPower.averagePower = 0;
        m_edPower.lastUpdate = Simulator::Now();
        m_edPower.measurementLength = Seconds(8.0 / GetDataOrSymbolRate(false));
        m_edRequest = Simulator::Schedule(m_edPower.measurementLength, &LrWpanPhy::EndEd, this);
    }
    else
    {
        PhyEnumeration result = m_trxState;
        if (m_trxState == IEEE_802_15_4_PHY_BUSY_TX)
        {
            result = IEEE_802_15_4_PHY_TX_ON;
        }
 
        if (!m_plmeEdConfirmCallback.IsNull())
        {
            m_plmeEdConfirmCallback(result, 0);
        }
    }
}
 
void
LrWpanPhy::PlmeGetAttributeRequest(PhyPibAttributeIdentifier id)
{
    NS_LOG_FUNCTION(this << id);
    PhyEnumeration status = IEEE_802_15_4_PHY_SUCCESS;
    Ptr<PhyPibAttributes> attributes = Create<PhyPibAttributes>();
 
    switch (id)
    {
    case phyCurrentChannel:
        attributes->phyCurrentChannel = m_phyPIBAttributes.phyCurrentChannel;
        break;
    case phyCurrentPage:
        attributes->phyCurrentPage = m_phyPIBAttributes.phyCurrentPage;
        break;
    case phySHRDuration:
        attributes->phySHRDuration = GetPhySHRDuration();
        break;
    case phySymbolsPerOctet:
        attributes->phySymbolsPerOctet = GetPhySymbolsPerOctet();
        break;
    default:
        status = IEEE_802_15_4_PHY_UNSUPPORTED_ATTRIBUTE;
        break;
    }
 
    if (!m_plmeGetAttributeConfirmCallback.IsNull())
    {
        m_plmeGetAttributeConfirmCallback(status, id, attributes);
    }
}
 
// Section 6.2.2.7.3
void
LrWpanPhy::PlmeSetTRXStateRequest(PhyEnumeration state)
{
    NS_LOG_FUNCTION(this << state);
 
    // Check valid states (Table 14)
    NS_ABORT_IF((state != IEEE_802_15_4_PHY_RX_ON) && (state != IEEE_802_15_4_PHY_TRX_OFF) &&
                (state != IEEE_802_15_4_PHY_FORCE_TRX_OFF) && (state != IEEE_802_15_4_PHY_TX_ON));
 
    NS_LOG_LOGIC("Trying to set m_trxState from " << m_trxState << " to " << state);
 
    // this method always overrides previous state setting attempts
    if (!m_setTRXState.IsExpired())
    {
        if (m_trxStatePending == state)
        {
            // Simply wait for the ongoing state switch.
            return;
        }
        else
        {
            NS_LOG_DEBUG("Cancel m_setTRXState");
            // Keep the transceiver state as the old state before the switching attempt.
            m_setTRXState.Cancel();
        }
    }
    if (m_trxStatePending != IEEE_802_15_4_PHY_IDLE)
    {
        m_trxStatePending = IEEE_802_15_4_PHY_IDLE;
    }
 
    if (state == m_trxState)
    {
        if (!m_plmeSetTRXStateConfirmCallback.IsNull())
        {
            m_plmeSetTRXStateConfirmCallback(state);
        }
        return;
    }
 
    if (((state == IEEE_802_15_4_PHY_RX_ON) || (state == IEEE_802_15_4_PHY_TRX_OFF)) &&
        (m_trxState == IEEE_802_15_4_PHY_BUSY_TX))
    {
        NS_LOG_DEBUG("Phy is busy; setting state pending to " << state);
        m_trxStatePending = state;
        return; // Send PlmeSetTRXStateConfirm later
    }
 
    // specification talks about being in RX_ON and having received
    // a valid SFD.  Here, we are not modelling at that level of
    // granularity, so we just test for BUSY_RX state (any part of
    // a packet being actively received)
    if (state == IEEE_802_15_4_PHY_TRX_OFF)
    {
        CancelEd(state);
 
        if ((m_trxState == IEEE_802_15_4_PHY_BUSY_RX) && (m_currentRxPacket.first) &&
            (!m_currentRxPacket.second))
        {
            NS_LOG_DEBUG("Receiver has valid SFD; defer state change");
            m_trxStatePending = state;
            return; // Send PlmeSetTRXStateConfirm later
        }
        else if (m_trxState == IEEE_802_15_4_PHY_RX_ON || m_trxState == IEEE_802_15_4_PHY_TX_ON)
        {
            ChangeTrxState(IEEE_802_15_4_PHY_TRX_OFF);
            if (!m_plmeSetTRXStateConfirmCallback.IsNull())
            {
                m_plmeSetTRXStateConfirmCallback(state);
            }
            return;
        }
    }
 
    if (state == IEEE_802_15_4_PHY_TX_ON)
    {
        CancelEd(state);
 
        NS_LOG_DEBUG("turn on PHY_TX_ON");
        if ((m_trxState == IEEE_802_15_4_PHY_BUSY_RX) || (m_trxState == IEEE_802_15_4_PHY_RX_ON))
        {
            if (m_currentRxPacket.first)
            {
                // TX_ON is being forced during a reception (For example, when a ACK or Beacon is
                // issued) The current RX frame is marked as incomplete and the reception as
                // canceled EndRx () will handle the rest accordingly
                NS_LOG_DEBUG("force TX_ON, terminate reception");
                m_currentRxPacket.second = true;
                m_isRxCanceled = true;
            }
 
            // If CCA is in progress, cancel CCA and return BUSY.
            if (!m_ccaRequest.IsExpired())
            {
                m_ccaRequest.Cancel();
                if (!m_plmeCcaConfirmCallback.IsNull())
                {
                    m_plmeCcaConfirmCallback(IEEE_802_15_4_PHY_BUSY);
                }
            }
 
            m_trxStatePending = IEEE_802_15_4_PHY_TX_ON;
 
            // Delay for turnaround time (BUSY_RX|RX_ON ---> TX_ON)
            Time setTime = Seconds((double)lrwpan::aTurnaroundTime / GetDataOrSymbolRate(false));
            m_setTRXState = Simulator::Schedule(setTime, &LrWpanPhy::EndSetTRXState, this);
            return;
        }
        else if (m_trxState == IEEE_802_15_4_PHY_BUSY_TX || m_trxState == IEEE_802_15_4_PHY_TX_ON)
        {
            // We do NOT change the transceiver state here. We only report that
            // the transceiver is already in TX_ON state.
            if (!m_plmeSetTRXStateConfirmCallback.IsNull())
            {
                m_plmeSetTRXStateConfirmCallback(IEEE_802_15_4_PHY_TX_ON);
            }
            return;
        }
        else if (m_trxState == IEEE_802_15_4_PHY_TRX_OFF)
        {
            ChangeTrxState(IEEE_802_15_4_PHY_TX_ON);
            if (!m_plmeSetTRXStateConfirmCallback.IsNull())
            {
                m_plmeSetTRXStateConfirmCallback(IEEE_802_15_4_PHY_TX_ON);
            }
            return;
        }
    }
 
    if (state == IEEE_802_15_4_PHY_FORCE_TRX_OFF)
    {
        if (m_trxState == IEEE_802_15_4_PHY_TRX_OFF)
        {
            NS_LOG_DEBUG("force TRX_OFF, was already off");
        }
        else
        {
            NS_LOG_DEBUG("force TRX_OFF, SUCCESS");
            if (m_currentRxPacket.first)
            {
                // Terminate reception
                // Mark the packet as incomplete and reception as canceled.
                NS_LOG_DEBUG("force TRX_OFF, terminate reception");
                m_currentRxPacket.second = true;
                m_isRxCanceled = true;
            }
            if (m_trxState == IEEE_802_15_4_PHY_BUSY_TX)
            {
                NS_LOG_DEBUG("force TRX_OFF, terminate transmission");
                m_currentTxPacket.second = true;
            }
            ChangeTrxState(IEEE_802_15_4_PHY_TRX_OFF);
            // Clear any other state
            m_trxStatePending = IEEE_802_15_4_PHY_IDLE;
        }
        if (!m_plmeSetTRXStateConfirmCallback.IsNull())
        {
            m_plmeSetTRXStateConfirmCallback(IEEE_802_15_4_PHY_SUCCESS);
        }
        return;
    }
 
    if (state == IEEE_802_15_4_PHY_RX_ON)
    {
        if (m_trxState == IEEE_802_15_4_PHY_TX_ON || m_trxState == IEEE_802_15_4_PHY_TRX_OFF)
        {
            // Turnaround delay
            // TODO: Does it really take aTurnaroundTime to switch the transceiver state,
            //       even when the transmitter is not busy? (6.9.1)
            m_trxStatePending = IEEE_802_15_4_PHY_RX_ON;
 
            Time setTime = Seconds((double)lrwpan::aTurnaroundTime / GetDataOrSymbolRate(false));
            m_setTRXState = Simulator::Schedule(setTime, &LrWpanPhy::EndSetTRXState, this);
            return;
        }
        else if (m_trxState == IEEE_802_15_4_PHY_BUSY_RX)
        {
            if (!m_plmeSetTRXStateConfirmCallback.IsNull())
            {
                m_plmeSetTRXStateConfirmCallback(IEEE_802_15_4_PHY_RX_ON);
            }
            return;
        }
    }
 
    NS_FATAL_ERROR("Unexpected transition from state " << m_trxState << " to state " << state);
}
 
bool
LrWpanPhy::ChannelSupported(uint8_t channel)
{
    NS_LOG_FUNCTION(this << channel);
    bool retValue = false;
 
    // Bits 0-26 (27 LSB)
    if ((m_phyPIBAttributes.phyChannelsSupported[m_phyPIBAttributes.phyCurrentPage] &
         (1 << channel)) != 0)
    {
        return retValue = true;
    }
    else
    {
        return retValue;
    }
}
 
bool
LrWpanPhy::PageSupported(uint8_t page)
{
    NS_LOG_FUNCTION(this << +page);
    bool retValue = false;
 
    // TODO: Only O-QPSK 2.4GHz is supported in the LrWpanSpectrumModel
    //       we must limit the page until support for other modulation is added to the spectrum
    //       model.
    //
    NS_ABORT_MSG_UNLESS(page == 0, " Only Page 0 (2.4Ghz O-QPSK supported).");
 
    // IEEE 802.15.4-2006, Table 23 phyChannelsSupported   Bits 27-31  (5 MSB)
    uint8_t supportedPage = (m_phyPIBAttributes.phyChannelsSupported[page] >> 27) & (0x1F);
 
    if (page == supportedPage)
    {
        retValue = true;
    }
 
    return retValue;
}
 
void
LrWpanPhy::PlmeSetAttributeRequest(PhyPibAttributeIdentifier id, Ptr<PhyPibAttributes> attribute)
{
    NS_LOG_FUNCTION(this << id << attribute);
    NS_ASSERT(attribute);
    PhyEnumeration status = IEEE_802_15_4_PHY_SUCCESS;
 
    switch (id)
    {
    case phyCurrentPage: {
        if (!PageSupported(attribute->phyCurrentPage))
        {
            status = IEEE_802_15_4_PHY_INVALID_PARAMETER;
        }
        else if (m_phyPIBAttributes.phyCurrentPage != attribute->phyCurrentPage)
        {
            // Cancel a pending transceiver state change.
            // Switch off the transceiver.
            // TODO: Is switching off the transceiver the right choice?
            m_trxState = IEEE_802_15_4_PHY_TRX_OFF;
            if (m_trxStatePending != IEEE_802_15_4_PHY_IDLE)
            {
                m_trxStatePending = IEEE_802_15_4_PHY_IDLE;
                m_setTRXState.Cancel();
                if (!m_plmeSetTRXStateConfirmCallback.IsNull())
                {
                    m_plmeSetTRXStateConfirmCallback(IEEE_802_15_4_PHY_TRX_OFF);
                }
            }
 
            // Any packet in transmission or reception will be corrupted.
            if (m_currentRxPacket.first)
            {
                m_currentRxPacket.second = true;
            }
            if (PhyIsBusy())
            {
                m_currentTxPacket.second = true;
                m_pdDataRequest.Cancel();
                m_currentTxPacket.first = nullptr;
                if (!m_pdDataConfirmCallback.IsNull())
                {
                    m_pdDataConfirmCallback(IEEE_802_15_4_PHY_TRX_OFF);
                }
            }
 
            // Changing the Page can change they current PHY in use
            // Set the correct PHY according to the Page
            if (attribute->phyCurrentPage == 0)
            {
                if (m_phyPIBAttributes.phyCurrentChannel == 0)
                {
                    // 868 MHz BPSK
                    m_phyOption = IEEE_802_15_4_868MHZ_BPSK;
                    NS_LOG_INFO("Page 0, 868 MHz BPSK PHY SET");
                }
                else if (m_phyPIBAttributes.phyCurrentChannel <= 10)
                {
                    // 915 MHz BPSK
                    m_phyOption = IEEE_802_15_4_915MHZ_BPSK;
                    NS_LOG_INFO("Page " << (uint32_t)attribute->phyCurrentPage
                                        << ",915 MHz BPSK PHY SET");
                }
                else if (m_phyPIBAttributes.phyCurrentChannel <= 26)
                {
                    // 2.4 GHz MHz O-QPSK
                    m_phyOption = IEEE_802_15_4_2_4GHZ_OQPSK;
                    NS_LOG_INFO("Page " << (uint32_t)attribute->phyCurrentPage
                                        << ", 2.4 Ghz O-QPSK PHY SET");
                }
            }
            else if (attribute->phyCurrentPage == 1)
            {
                if (m_phyPIBAttributes.phyCurrentChannel == 0)
                {
                    // 868 MHz ASK
                    m_phyOption = IEEE_802_15_4_868MHZ_ASK;
                    NS_LOG_INFO("Page " << (uint32_t)attribute->phyCurrentPage
                                        << ", 868 MHz ASK PHY SET");
                }
                else if (m_phyPIBAttributes.phyCurrentChannel <= 10)
                {
                    // 915 MHz ASK
                    m_phyOption = IEEE_802_15_4_915MHZ_ASK;
                    NS_LOG_INFO("Page " << (uint32_t)attribute->phyCurrentPage
                                        << ", 915 MHz ASK PHY SET");
                }
                else
                {
                    // No longer valid channel
                    m_phyOption = IEEE_802_15_4_868MHZ_ASK;
                    m_phyPIBAttributes.phyCurrentChannel = 0;
                    NS_LOG_INFO("Channel no longer valid in new page "
                                << (uint32_t)attribute->phyCurrentPage
                                << ", setting new default channel "
                                << (uint32_t)m_phyPIBAttributes.phyCurrentChannel);
                    NS_LOG_INFO("868 MHz ASK PHY SET");
                }
            }
            else if (attribute->phyCurrentPage == 2)
            {
                if (m_phyPIBAttributes.phyCurrentChannel == 0)
                {
                    // 868 MHz O-QPSK
                    m_phyOption = IEEE_802_15_4_868MHZ_OQPSK;
                    NS_LOG_INFO("Page " << (uint32_t)attribute->phyCurrentPage
                                        << ", 868 MHz O-QPSK PHY SET");
                }
                else if (m_phyPIBAttributes.phyCurrentChannel <= 10)
                {
                    // 915 MHz O-QPSK
                    m_phyOption = IEEE_802_15_4_915MHZ_OQPSK;
                    NS_LOG_INFO("Page " << (uint32_t)attribute->phyCurrentPage
                                        << ", 915 MHz O-QPSK PHY SET");
                }
                else
                {
                    // No longer valid channel
                    m_phyOption = IEEE_802_15_4_868MHZ_OQPSK;
                    m_phyPIBAttributes.phyCurrentChannel = 0;
                    NS_LOG_INFO("Channel no longer valid in new page "
                                << (uint32_t)attribute->phyCurrentPage
                                << ", setting new default channel "
                                << (uint32_t)m_phyPIBAttributes.phyCurrentChannel);
                    NS_LOG_INFO("868 MHz O-QPSK PHY SET");
                }
            }
            else if (attribute->phyCurrentPage == 5)
            {
                if (m_phyPIBAttributes.phyCurrentChannel <= 3)
                {
                    // 780 MHz O-QPSK
                    m_phyOption = IEEE_802_15_4_780MHZ_OQPSK;
                    NS_LOG_INFO("Page " << (uint32_t)attribute->phyCurrentPage
                                        << ", 915 MHz O-QPSK PHY SET");
                }
                else
                {
                    // No longer valid channel
                    m_phyOption = IEEE_802_15_4_780MHZ_OQPSK;
                    m_phyPIBAttributes.phyCurrentChannel = 0;
                    NS_LOG_INFO("Channel no longer valid in new page "
                                << (uint32_t)attribute->phyCurrentPage
                                << ", setting new default channel "
                                << (uint32_t)m_phyPIBAttributes.phyCurrentChannel);
                    NS_LOG_INFO("780 MHz O-QPSK PHY SET");
                }
            }
            else if (attribute->phyCurrentPage == 6)
            {
                if (m_phyPIBAttributes.phyCurrentChannel <= 9)
                {
                    // 950 MHz BPSK
                    m_phyOption = IEEE_802_15_4_950MHZ_BPSK;
                    NS_LOG_INFO("Page " << (uint32_t)attribute->phyCurrentPage
                                        << ", 950 MHz BPSK PHY SET");
                }
                else
                {
                    m_phyOption = IEEE_802_15_4_950MHZ_BPSK;
                    m_phyPIBAttributes.phyCurrentChannel = 0;
                    NS_LOG_INFO("Channel no longer valid in new page "
                                << (uint32_t)attribute->phyCurrentPage
                                << ", setting new default channel "
                                << (uint32_t)m_phyPIBAttributes.phyCurrentChannel);
                    NS_LOG_INFO("950 MHz BPSK PHY SET");
                }
            }
 
            m_phyPIBAttributes.phyCurrentPage = attribute->phyCurrentPage;
 
            // TODO: Set the maximum possible sensitivity by default.
            //       This maximum sensitivity depends on the modulation used.
            //       Currently Only O-QPSK 250kbps is supported so we use its max sensitivity.
            SetRxSensitivity(-106.58);
        }
        break;
    }
    case phyCurrentChannel: {
        if (!ChannelSupported(attribute->phyCurrentChannel))
        {
            status = IEEE_802_15_4_PHY_INVALID_PARAMETER;
        }
        if (m_phyPIBAttributes.phyCurrentChannel != attribute->phyCurrentChannel)
        {
            // Cancel a pending transceiver state change.
            // Switch off the transceiver.
            // TODO: Is switching off the transceiver the right choice?
            m_trxState = IEEE_802_15_4_PHY_TRX_OFF;
            if (m_trxStatePending != IEEE_802_15_4_PHY_IDLE)
            {
                m_trxStatePending = IEEE_802_15_4_PHY_IDLE;
                m_setTRXState.Cancel();
                if (!m_plmeSetTRXStateConfirmCallback.IsNull())
                {
                    m_plmeSetTRXStateConfirmCallback(IEEE_802_15_4_PHY_TRX_OFF);
                }
            }
 
            // Any packet in transmission or reception will be corrupted.
            if (m_currentRxPacket.first)
            {
                m_currentRxPacket.second = true;
            }
            if (PhyIsBusy())
            {
                m_currentTxPacket.second = true;
                m_pdDataRequest.Cancel();
                m_currentTxPacket.first = nullptr;
                if (!m_pdDataConfirmCallback.IsNull())
                {
                    m_pdDataConfirmCallback(IEEE_802_15_4_PHY_TRX_OFF);
                }
            }
 
            m_phyPIBAttributes.phyCurrentChannel = attribute->phyCurrentChannel;
 
            // use the prev configured sensitivity before changing the channel
            SetRxSensitivity(WToDbm(m_rxSensitivity));
        }
        break;
    }
    case phyChannelsSupported: { // only the first element is considered in the array
        if ((attribute->phyChannelsSupported[0] & 0xf8000000) != 0)
        { // 5 MSBs reserved
            status = IEEE_802_15_4_PHY_INVALID_PARAMETER;
        }
        else
        {
            m_phyPIBAttributes.phyChannelsSupported[0] = attribute->phyChannelsSupported[0];
        }
        break;
    }
    case phyTransmitPower: {
        if (attribute->phyTransmitPower & 0xC0)
        {
            NS_LOG_LOGIC("LrWpanPhy::PlmeSetAttributeRequest error - can not change read-only "
                         "attribute bits.");
            status = IEEE_802_15_4_PHY_INVALID_PARAMETER;
        }
        else
        {
            m_phyPIBAttributes.phyTransmitPower = attribute->phyTransmitPower;
            LrWpanSpectrumValueHelper psdHelper;
            m_txPsd = psdHelper.CreateTxPowerSpectralDensity(
                GetNominalTxPowerFromPib(m_phyPIBAttributes.phyTransmitPower),
                m_phyPIBAttributes.phyCurrentChannel);
        }
        break;
    }
    case phyCCAMode: {
        if ((attribute->phyCCAMode < 1) || (attribute->phyCCAMode > 3))
        {
            status = IEEE_802_15_4_PHY_INVALID_PARAMETER;
        }
        else
        {
            m_phyPIBAttributes.phyCCAMode = attribute->phyCCAMode;
        }
        break;
    }
    default: {
        status = IEEE_802_15_4_PHY_UNSUPPORTED_ATTRIBUTE;
        break;
    }
    }
 
    if (!m_plmeSetAttributeConfirmCallback.IsNull())
    {
        m_plmeSetAttributeConfirmCallback(status, id);
    }
}
 
void
LrWpanPhy::SetPdDataIndicationCallback(PdDataIndicationCallback c)
{
    NS_LOG_FUNCTION(this);
    m_pdDataIndicationCallback = c;
}
 
void
LrWpanPhy::SetPdDataConfirmCallback(PdDataConfirmCallback c)
{
    NS_LOG_FUNCTION(this);
    m_pdDataConfirmCallback = c;
}
 
void
LrWpanPhy::SetPlmeCcaConfirmCallback(PlmeCcaConfirmCallback c)
{
    NS_LOG_FUNCTION(this);
    m_plmeCcaConfirmCallback = c;
}
 
void
LrWpanPhy::SetPlmeEdConfirmCallback(PlmeEdConfirmCallback c)
{
    NS_LOG_FUNCTION(this);
    m_plmeEdConfirmCallback = c;
}
 
void
LrWpanPhy::SetPlmeGetAttributeConfirmCallback(PlmeGetAttributeConfirmCallback c)
{
    NS_LOG_FUNCTION(this);
    m_plmeGetAttributeConfirmCallback = c;
}
 
void
LrWpanPhy::SetPlmeSetTRXStateConfirmCallback(PlmeSetTRXStateConfirmCallback c)
{
    NS_LOG_FUNCTION(this);
    m_plmeSetTRXStateConfirmCallback = c;
}
 
void
LrWpanPhy::SetPlmeSetAttributeConfirmCallback(PlmeSetAttributeConfirmCallback c)
{
    NS_LOG_FUNCTION(this);
    m_plmeSetAttributeConfirmCallback = c;
}
 
void
LrWpanPhy::ChangeTrxState(PhyEnumeration newState)
{
    NS_LOG_LOGIC(this << " state: " << m_trxState << " -> " << newState);
 
    m_trxStateLogger(Simulator::Now(), m_trxState, newState);
    m_trxState = newState;
}
 
bool
LrWpanPhy::PhyIsBusy() const
{
    NS_LOG_FUNCTION(this << m_trxState);
    return ((m_trxState == IEEE_802_15_4_PHY_BUSY_TX) ||
            (m_trxState == IEEE_802_15_4_PHY_BUSY_RX) || (m_trxState == IEEE_802_15_4_PHY_BUSY));
}
 
void
LrWpanPhy::CancelEd(PhyEnumeration state)
{
    NS_LOG_FUNCTION(this);
    NS_ASSERT(state == IEEE_802_15_4_PHY_TRX_OFF || state == IEEE_802_15_4_PHY_TX_ON);
 
    if (!m_edRequest.IsExpired())
    {
        m_edRequest.Cancel();
        if (!m_plmeEdConfirmCallback.IsNull())
        {
            m_plmeEdConfirmCallback(state, 0);
        }
    }
}
 
void
LrWpanPhy::EndEd()
{
    NS_LOG_FUNCTION(this);
 
    m_edPower.averagePower +=
        LrWpanSpectrumValueHelper::TotalAvgPower(m_signal->GetSignalPsd(),
                                                 m_phyPIBAttributes.phyCurrentChannel) *
        (Simulator::Now() - m_edPower.lastUpdate).GetTimeStep() /
        m_edPower.measurementLength.GetTimeStep();
 
    uint8_t energyLevel;
 
    // Per IEEE802.15.4-2006 sec 6.9.7
    double ratio = m_edPower.averagePower / m_rxSensitivity;
    ratio = 10.0 * log10(ratio);
    if (ratio <= 10.0)
    { // less than 10 dB
        energyLevel = 0;
    }
    else if (ratio >= 40.0)
    { // less than 40 dB
        energyLevel = 255;
    }
    else
    {
        // in-between with linear increase per sec 6.9.7
        energyLevel = static_cast<uint8_t>(((ratio - 10.0) / 30.0) * 255.0);
    }
 
    if (!m_plmeEdConfirmCallback.IsNull())
    {
        m_plmeEdConfirmCallback(IEEE_802_15_4_PHY_SUCCESS, energyLevel);
    }
}
 
void
LrWpanPhy::EndCca()
{
    NS_LOG_FUNCTION(this);
    PhyEnumeration sensedChannelState = IEEE_802_15_4_PHY_UNSPECIFIED;
 
    // Update peak power.
    double power = LrWpanSpectrumValueHelper::TotalAvgPower(m_signal->GetSignalPsd(),
                                                            m_phyPIBAttributes.phyCurrentChannel);
    if (m_ccaPeakPower < power)
    {
        m_ccaPeakPower = power;
    }
 
    if (PhyIsBusy())
    {
        sensedChannelState = IEEE_802_15_4_PHY_BUSY;
    }
    else if (m_phyPIBAttributes.phyCCAMode == 1)
    { // sec 6.9.9 ED detection
        // -- ED threshold at most 10 dB above receiver sensitivity.
        if (10 * log10(m_ccaPeakPower / m_rxSensitivity) >= 10.0)
        {
            sensedChannelState = IEEE_802_15_4_PHY_BUSY;
        }
        else
        {
            sensedChannelState = IEEE_802_15_4_PHY_IDLE;
        }
    }
    else if (m_phyPIBAttributes.phyCCAMode == 2)
    {
        // sec 6.9.9 carrier sense only
        if (m_trxState == IEEE_802_15_4_PHY_BUSY_RX)
        {
            // We currently do not model PPDU reception in detail. Instead we model
            // packet reception starting with the first bit of the preamble.
            // Therefore, this code will never be reached, as PhyIsBusy() would
            // already lead to a channel busy condition.
            // TODO: Change this, if we also model preamble and SFD detection.
            sensedChannelState = IEEE_802_15_4_PHY_BUSY;
        }
        else
        {
            sensedChannelState = IEEE_802_15_4_PHY_IDLE;
        }
    }
    else if (m_phyPIBAttributes.phyCCAMode == 3)
    { // sect 6.9.9 both
        if ((10 * log10(m_ccaPeakPower / m_rxSensitivity) >= 10.0) &&
            m_trxState == IEEE_802_15_4_PHY_BUSY_RX)
        {
            // Again, this code will never be reached, if we are already receiving
            // a packet, as PhyIsBusy() would already lead to a channel busy condition.
            // TODO: Change this, if we also model preamble and SFD detection.
            sensedChannelState = IEEE_802_15_4_PHY_BUSY;
        }
        else
        {
            sensedChannelState = IEEE_802_15_4_PHY_IDLE;
        }
    }
    else
    {
        NS_ASSERT_MSG(false, "Invalid CCA mode");
    }
 
    NS_LOG_LOGIC(this << "channel sensed state: " << sensedChannelState);
 
    if (!m_plmeCcaConfirmCallback.IsNull())
    {
        m_plmeCcaConfirmCallback(sensedChannelState);
    }
}
 
void
LrWpanPhy::EndSetTRXState()
{
    NS_LOG_FUNCTION(this);
 
    NS_ABORT_IF((m_trxStatePending != IEEE_802_15_4_PHY_RX_ON) &&
                (m_trxStatePending != IEEE_802_15_4_PHY_TX_ON));
    ChangeTrxState(m_trxStatePending);
    m_trxStatePending = IEEE_802_15_4_PHY_IDLE;
 
    if (!m_plmeSetTRXStateConfirmCallback.IsNull())
    {
        m_plmeSetTRXStateConfirmCallback(m_trxState);
    }
}
 
void
LrWpanPhy::EndTx()
{
    NS_LOG_FUNCTION(this);
 
    NS_ABORT_IF((m_trxState != IEEE_802_15_4_PHY_BUSY_TX) &&
                (m_trxState != IEEE_802_15_4_PHY_TRX_OFF));
 
    if (!m_currentTxPacket.second)
    {
        NS_LOG_DEBUG("Packet successfully transmitted");
        m_phyTxEndTrace(m_currentTxPacket.first);
        if (!m_pdDataConfirmCallback.IsNull())
        {
            m_pdDataConfirmCallback(IEEE_802_15_4_PHY_SUCCESS);
        }
    }
    else
    {
        NS_LOG_DEBUG("Packet transmission aborted");
        m_phyTxDropTrace(m_currentTxPacket.first);
        if (!m_pdDataConfirmCallback.IsNull())
        {
            // See if this is ever entered in another state
            NS_ASSERT(m_trxState == IEEE_802_15_4_PHY_TRX_OFF);
            m_pdDataConfirmCallback(m_trxState);
        }
    }
    m_currentTxPacket.first = nullptr;
    m_currentTxPacket.second = false;
 
    // We may be waiting to apply a pending state change.
    if (m_trxStatePending != IEEE_802_15_4_PHY_IDLE)
    {
        // Only change the state immediately, if the transceiver is not already
        // switching the state.
        if (!m_setTRXState.IsPending())
        {
            NS_LOG_LOGIC("Apply pending state change to " << m_trxStatePending);
            ChangeTrxState(m_trxStatePending);
            m_trxStatePending = IEEE_802_15_4_PHY_IDLE;
            if (!m_plmeSetTRXStateConfirmCallback.IsNull())
            {
                m_plmeSetTRXStateConfirmCallback(IEEE_802_15_4_PHY_SUCCESS);
            }
        }
    }
    else
    {
        if (m_trxState != IEEE_802_15_4_PHY_TRX_OFF)
        {
            ChangeTrxState(IEEE_802_15_4_PHY_TX_ON);
        }
    }
}
 
Time
LrWpanPhy::CalculateTxTime(Ptr<const Packet> packet)
{
    NS_LOG_FUNCTION(this << packet);
 
    bool isData = true;
    Time txTime = GetPpduHeaderTxTime();
 
    txTime += Seconds(packet->GetSize() * 8.0 / GetDataOrSymbolRate(isData));
 
    return txTime;
}
 
uint8_t
LrWpanPhy::GetCurrentPage() const
{
    return m_phyPIBAttributes.phyCurrentPage;
}
 
uint8_t
LrWpanPhy::GetCurrentChannelNum() const
{
    return m_phyPIBAttributes.phyCurrentChannel;
}
 
double
LrWpanPhy::GetDataOrSymbolRate(bool isData)
{
    double rate = 0.0;
 
    NS_ASSERT(m_phyOption < IEEE_802_15_4_INVALID_PHY_OPTION);
 
    if (isData)
    {
        rate = dataSymbolRates[m_phyOption].bitRate;
    }
    else
    {
        rate = dataSymbolRates[m_phyOption].symbolRate;
    }
 
    return (rate * 1000.0);
}
 
Time
LrWpanPhy::GetPpduHeaderTxTime()
{
    NS_LOG_FUNCTION(this);
 
    bool isData = false;
    double totalPpduHdrSymbols;
 
    NS_ASSERT(m_phyOption < IEEE_802_15_4_INVALID_PHY_OPTION);
 
    totalPpduHdrSymbols = ppduHeaderSymbolNumbers[m_phyOption].shrPreamble +
                          ppduHeaderSymbolNumbers[m_phyOption].shrSfd +
                          ppduHeaderSymbolNumbers[m_phyOption].phr;
 
    return Seconds(totalPpduHdrSymbols / GetDataOrSymbolRate(isData));
}
 
void
LrWpanPhy::SetPhyOption(PhyOption phyOption)
{
    NS_LOG_FUNCTION(this);
 
    m_phyOption = IEEE_802_15_4_INVALID_PHY_OPTION;
 
    // TODO: Only O-QPSK 2.4GHz is supported in the LrWpanSpectrumModel
    //       we must limit the page until support for other modulations is added to the spectrum
    //       model.
    NS_ABORT_MSG_UNLESS(phyOption == IEEE_802_15_4_2_4GHZ_OQPSK, " Only 2.4Ghz O-QPSK supported.");
 
    // Set default Channel and Page
    // IEEE 802.15.4-2006 Table 2, section 6.1.1
    // IEEE 802.15.4c-2009 Table 2, section 6.1.2.2
    // IEEE 802.15.4d-2009 Table 2, section 6.1.2.2
    switch (phyOption)
    {
    case IEEE_802_15_4_868MHZ_BPSK:
        // IEEE 802.15.4-2006 868 MHz BPSK (Page 0, Channel 0)
        m_phyPIBAttributes.phyCurrentPage = 0;
        m_phyPIBAttributes.phyCurrentChannel = 0;
        break;
    case IEEE_802_15_4_915MHZ_BPSK:
        // IEEE 802.15.4-2006 915 MHz BPSK (Page 0, Channels 1 to 10)
        m_phyPIBAttributes.phyCurrentPage = 0;
        m_phyPIBAttributes.phyCurrentChannel = 1;
        break;
    case IEEE_802_15_4_950MHZ_BPSK:
        // IEEE 802.15.4d-2009 950 MHz BPSK (Page 6, Channels 0 to 9)
        m_phyPIBAttributes.phyCurrentPage = 6;
        m_phyPIBAttributes.phyCurrentChannel = 0;
        break;
    case IEEE_802_15_4_868MHZ_ASK:
        // IEEE 802.15.4-2006 868 MHz ASK (Page 1, Channel 0)
        m_phyPIBAttributes.phyCurrentPage = 1;
        m_phyPIBAttributes.phyCurrentChannel = 0;
        break;
    case IEEE_802_15_4_915MHZ_ASK:
        // IEEE 802.15.4-2006 915 MHz ASK (Page 1, Channel 1 to 10)
        m_phyPIBAttributes.phyCurrentPage = 1;
        m_phyPIBAttributes.phyCurrentChannel = 1;
        break;
    case IEEE_802_15_4_780MHZ_OQPSK:
        // IEEE 802.15.4c-2009 780 MHz O-QPSK (Page 5, Channel 0 to 3)
        m_phyPIBAttributes.phyCurrentPage = 5;
        m_phyPIBAttributes.phyCurrentChannel = 0;
        break;
    case IEEE_802_15_4_868MHZ_OQPSK:
        // IEEE 802.15.4-2006 868 MHz O-QPSK (Page 2, Channel 0)
        m_phyPIBAttributes.phyCurrentPage = 2;
        m_phyPIBAttributes.phyCurrentChannel = 0;
        break;
    case IEEE_802_15_4_915MHZ_OQPSK:
        // IEEE 802.15.4-2006 915 MHz O-QPSK (Page 2, Channels 1 to 10)
        m_phyPIBAttributes.phyCurrentPage = 2;
        m_phyPIBAttributes.phyCurrentChannel = 1;
        break;
    case IEEE_802_15_4_2_4GHZ_OQPSK:
        // IEEE 802.15.4-2009 2.4 GHz O-QPSK (Page 0, Channels 11 to 26)
        m_phyPIBAttributes.phyCurrentPage = 0;
        m_phyPIBAttributes.phyCurrentChannel = 11;
        break;
    case IEEE_802_15_4_INVALID_PHY_OPTION:
        // IEEE 802.15.4-2006 Use Non-Registered Page and channel
        m_phyPIBAttributes.phyCurrentPage = 31;
        m_phyPIBAttributes.phyCurrentChannel = 26;
        break;
    }
 
    NS_ASSERT(phyOption != IEEE_802_15_4_INVALID_PHY_OPTION);
 
    m_phyOption = phyOption;
    // TODO: Fix/Update list when more modulations are supported.
    // IEEE 802.15.4-2006, Table 23
    // 5 MSB = Page number, 27 LSB = Supported Channels (1= supported, 0 Not supported)
    // Currently only page 0, channels 11-26 supported.
    m_phyPIBAttributes.phyChannelsSupported[0] =
        0x7FFF800; // Page 0 should support, Channels 0 to 26 (0x07FFFFFF)
 
    for (int i = 1; i <= 31; i++)
    {
        // Page 1 to 31, No support (Page set to 31, all channels 0)
        m_phyPIBAttributes.phyChannelsSupported[i] = 0xF8000000;
    }
 
    m_edPower.averagePower = 0.0;
    m_edPower.lastUpdate = Seconds(0);
    m_edPower.measurementLength = Seconds(0);
 
    // TODO: Change the limits  Rx sensitivity when other modulations are supported
    // Currently, only O-QPSK 250kbps is supported and its maximum possible sensitivity is
    // equal to -106.58 dBm and its minimum sensitivity is defined as -85 dBm
    SetRxSensitivity(-106.58);
 
    m_rxLastUpdate = Seconds(0);
    m_currentRxPacket = std::make_pair(nullptr, true);
    m_currentTxPacket = std::make_pair(nullptr, true);
    m_errorModel = nullptr;
}
 
void
LrWpanPhy::SetRxSensitivity(double dbmSensitivity)
{
    NS_LOG_FUNCTION(this << dbmSensitivity << "dBm");
 
    // See IEEE 802.15.4-2011 Sections 10.3.4, 11.3.4, 13.3.4, 13.3.4, 14.3.4, 15.3.4
    if (m_phyOption == IEEE_802_15_4_915MHZ_BPSK || m_phyOption == IEEE_802_15_4_950MHZ_BPSK)
    {
        if (dbmSensitivity > -92)
        {
            NS_ABORT_MSG("The minimum Rx sensitivity for this band should be at least -92 dBm");
        }
    }
    else
    {
        if (dbmSensitivity > -85)
        {
            NS_ABORT_MSG("The minimum Rx sensitivity for this band should be at least -85 dBm");
        }
    }
 
    // Calculate the noise factor required to reduce the Rx sensitivity.
    // The maximum possible sensitivity in the current modulation is used as a reference
    // to calculate the noise factor (F). The noise factor is a dimensionless ratio.
    // Currently only one PHY modulation is supported:
    // O-QPSK 250kpps which has a Max Rx sensitivity: -106.58 dBm (Noise factor = 1).
    // After Rx sensitivity is set, this becomes the new point where PER < 1 % for a
    // PSDU of 20 bytes as described by the standard.
 
    // TODO: recalculate maxRxSensitivity (Noise factor = 1) when additional modulations are
    // supported.
    double maxRxSensitivityW = DbmToW(-106.58);
 
    LrWpanSpectrumValueHelper psdHelper;
    m_txPsd = psdHelper.CreateTxPowerSpectralDensity(
        GetNominalTxPowerFromPib(m_phyPIBAttributes.phyTransmitPower),
        m_phyPIBAttributes.phyCurrentChannel);
    // Update thermal noise + noise factor added.
    long double noiseFactor = DbmToW(dbmSensitivity) / maxRxSensitivityW;
    psdHelper.SetNoiseFactor(noiseFactor);
    m_noise = psdHelper.CreateNoisePowerSpectralDensity(m_phyPIBAttributes.phyCurrentChannel);
 
    m_signal = Create<LrWpanInterferenceHelper>(m_noise->GetSpectrumModel());
    // Change receiver sensitivity from dBm to Watts
    m_rxSensitivity = DbmToW(dbmSensitivity);
}
 
double
LrWpanPhy::GetRxSensitivity()
{
    NS_LOG_FUNCTION(this);
    // Change receiver sensitivity from Watt to dBm
    return WToDbm(m_rxSensitivity);
}
 
PhyOption
LrWpanPhy::GetMyPhyOption()
{
    NS_LOG_FUNCTION(this);
    return m_phyOption;
}
 
void
LrWpanPhy::SetTxPowerSpectralDensity(Ptr<SpectrumValue> txPsd)
{
    NS_LOG_FUNCTION(this << txPsd);
    NS_ASSERT(txPsd);
    m_txPsd = txPsd;
    NS_LOG_INFO("\t computed tx_psd: " << *txPsd << "\t stored tx_psd: " << *m_txPsd);
}
 
void
LrWpanPhy::SetNoisePowerSpectralDensity(Ptr<const SpectrumValue> noisePsd)
{
    NS_LOG_FUNCTION(this << noisePsd);
    NS_LOG_INFO("\t computed noise_psd: " << *noisePsd);
    NS_ASSERT(noisePsd);
    m_noise = noisePsd;
}
 
Ptr<const SpectrumValue>
LrWpanPhy::GetNoisePowerSpectralDensity()
{
    NS_LOG_FUNCTION(this);
    return m_noise;
}
 
void
LrWpanPhy::SetErrorModel(Ptr<LrWpanErrorModel> e)
{
    NS_LOG_FUNCTION(this << e);
    NS_ASSERT(e);
    m_errorModel = e;
}
 
Ptr<LrWpanErrorModel>
LrWpanPhy::GetErrorModel() const
{
    NS_LOG_FUNCTION(this);
    return m_errorModel;
}
 
uint64_t
LrWpanPhy::GetPhySHRDuration() const
{
    NS_LOG_FUNCTION(this);
    NS_ASSERT(m_phyOption < IEEE_802_15_4_INVALID_PHY_OPTION);
 
    return ppduHeaderSymbolNumbers[m_phyOption].shrPreamble +
           ppduHeaderSymbolNumbers[m_phyOption].shrSfd;
}
 
double
LrWpanPhy::GetPhySymbolsPerOctet() const
{
    NS_LOG_FUNCTION(this);
    NS_ASSERT(m_phyOption < IEEE_802_15_4_INVALID_PHY_OPTION);
 
    return dataSymbolRates[m_phyOption].symbolRate / (dataSymbolRates[m_phyOption].bitRate / 8);
}
 
double
LrWpanPhy::GetCurrentSignalPsd()
{
    double powerWatts =
        LrWpanSpectrumValueHelper::TotalAvgPower(m_signal->GetSignalPsd(),
                                                 m_phyPIBAttributes.phyCurrentChannel);
    return WToDbm(powerWatts);
}
 
int8_t
LrWpanPhy::GetNominalTxPowerFromPib(uint8_t phyTransmitPower)
{
    NS_LOG_FUNCTION(this << +phyTransmitPower);
 
    // The nominal Tx power is stored in the PIB as a 6-bit
    // twos-complement, signed number.
 
    // The 5 LSBs can be copied - as their representation
    // is the same for unsigned and signed integers.
    int8_t nominalTxPower = phyTransmitPower & 0x1F;
 
    // Now check the 6th LSB (the "sign" bit).
    // It's a twos-complement format, so the "sign"
    // bit represents -2^5 = -32.
    if (phyTransmitPower & 0x20)
    {
        nominalTxPower -= 32;
    }
    return nominalTxPower;
}
 
double
LrWpanPhy::WToDbm(double watt)
{
    return (10 * log10(1000 * watt));
}
 
double
LrWpanPhy::DbmToW(double dbm)
{
    return (pow(10.0, dbm / 10.0) / 1000.0);
}
 
int64_t
LrWpanPhy::AssignStreams(int64_t stream)
{
    NS_LOG_FUNCTION(this);
    m_random->SetStream(stream);
    return 1;
}
 
void
LrWpanPhy::SetPostReceptionErrorModel(const Ptr<ErrorModel> em)
{
    NS_LOG_FUNCTION(this << em);
    m_postReceptionErrorModel = em;
}
 
} // namespace lrwpan
} // namespace ns3