►Nanonymous_namespace{buffer.cc} | |
CZeroes | Zero-filled buffer |
►Nanonymous_namespace{object-test-suite.cc} | |
CBaseA | |
CBaseB | |
CDerivedA | |
CDerivedB | |
►Nanonymous_namespace{packet-metadata-test.cc} | |
CHistoryHeader | |
CHistoryHeaderBase | |
CHistoryTrailer | |
CHistoryTrailerBase | |
►Nanonymous_namespace{packet-test-suite.cc} | |
CATestHeader | |
CATestHeaderBase | |
CATestTag | |
CATestTagBase | |
CATestTrailer | |
CATestTrailerBase | |
CExpected | |
►Nanonymous_namespace{rng-stream.cc} | Unnamed namespace for MRG32k3a implementation details |
CPrecalculated | The transition matrices of the two MRG components (in matrix form), raised to all powers of 2 from 1 to 191 |
►Nanonymous_namespace{traced-callback-typedef-test-suite.cc} | |
CNonConstReferenced | Non-const non-reference type |
CTracedCbSink | Sink functions |
CTracedCbSink< T1, empty, empty, empty, empty > | |
CTracedCbSink< T1, T2, empty, empty, empty > | |
CTracedCbSink< T1, T2, T3, empty, empty > | |
CTracedCbSink< T1, T2, T3, T4, empty > | |
►Nanonymous_namespace{wifi-phy.cc} | |
CConstructor | |
►Ncheck-style | |
CPatch | |
CPatchChunk | |
CPatchChunkLine | |
►Nflowmon-parse-results | |
CFiveTuple | |
CFlow | |
CHistogram | |
CProbeFlowStats | |
CSimulation | |
►Ngrid | |
CColor | |
CColors | |
CDataRange | |
CEventFloat | |
CEventInt | |
CEventString | |
CGraphicRenderer | |
CGtkGraphicRenderer | |
CMainWindow | |
CScaleRenderer | |
CTimeline | |
CTimelineDataRange | |
CTimelineEvent | |
CTimelines | |
CTimelinesRenderer | |
CTopLegendRenderer | |
►Ninterface_statistics | |
CShowInterfaceStatistics | |
►CStatisticsCollector | |
CNetDevStats | |
►Nipv4_routing_table | |
CShowIpv4RoutingTable | |
►Nns3 | Every class exported by the ns3 library is enclosed in the ns3 namespace |
►Nanonymous_namespace{pyviz.cc} | |
►CFastClipping | |
CLine | |
CVector2 | |
►Nanonymous_namespace{wifi-information-element-vector.cc} | |
CPIEComparator | |
►Naodv | |
CAodvLoopbackTestSuite | |
CAodvRqueueTest | Unit test for RequestQueue |
CAodvRtableEntryTest | Unit test for AODV routing table entry |
CAodvRtableTest | Unit test for AODV routing table |
CAodvTestSuite | |
CCloseNeighbor | |
CDeferredRouteOutputTag | Tag used by AODV implementation |
CDuplicatePacketDetection | Helper class used to remember already seen packets and detect duplicates |
►CIdCache | Unique packets identification cache used for simple duplicate detection |
CIsExpired | |
CUniqueId | Unique packet ID |
CIdCacheTest | Unit test for id cache |
CIdCacheTestSuite | |
CIsExpired | |
CLoopbackTestCase | AODV loopback UDP echo test case |
►CNeighbors | Maintain list of active neighbors |
CNeighbor | Neighbor description |
CNeighborTest | Unit test for neighbors |
CQueueEntry | AODV Queue Entry |
CQueueEntryTest | Unit test for AODV routing table entry |
CRequestQueue | AODV route request queue |
CRerrHeader | Route Error (RERR) Message Format |
CRerrHeaderTest | Unit test for RERR |
CRoutingProtocol | AODV routing protocol |
CRoutingTable | The Routing table used by AODV protocol |
CRoutingTableEntry | Routing table entry |
CRrepAckHeader | Route Reply Acknowledgment (RREP-ACK) Message Format |
CRrepAckHeaderTest | Unit test for RREP-ACK |
CRrepHeader | Route Reply (RREP) Message Format |
CRrepHeaderTest | Unit test for RREP |
CRreqHeader | Route Request (RREQ) Message Format |
CRreqHeaderTest | Unit test for RREQ |
CTypeHeader | AODV types |
CTypeHeaderTest | |
►NConfig | Namespace for the various functions implementing the Config system |
CMatchContainer | Hold a set of objects which match a specific search string |
►Ndot11s | |
CAirtimeLinkMetricCalculator | Airtime link metric calculator |
CDestinationAddressUnit | Describes an address unit in PREQ information element See 7.3.2.96 for more details |
CDot11sMeshCapability | See 7.3.2.86.7 in 802.11s draft 3.0 |
►CHwmpProtocol | Hybrid wireless mesh protocol – a routing protocol of IEEE 802.11s draft |
CFailedDestination | Structure of unreachable destination - address and sequence number |
CPathError | Structure of path error: IePerr and list of receivers: interfaces and MAC address |
CPreqEvent | |
CQueuedPacket | Packet waiting its routing information |
CStatistics | |
►CHwmpProtocolMac | Interface MAC plugin for HWMP – 802.11s routing protocol |
CMyPerr | |
CStatistics | |
►CHwmpRtable | Routing table for HWMP – 802.11s routing protocol |
CLookupResult | Route lookup result, return type of LookupXXX methods |
CPrecursor | Route found in reactive mode |
CProactiveRoute | Route fond in proactive mode |
CReactiveRoute | |
CHwmpTag | Hwmp tag implements interaction between HWMP protocol and MeshWifiMac |
CIeBeaconTiming | See 7.3.2.89 of 802.11s draft 2.07 |
CIeBeaconTimingUnit | Describes one unit of beacon timing element |
CIeConfiguration | Describes Mesh Configuration Element see 7.3.2.86 of 802.11s draft 3.0 |
CIeLinkMetricReport | IEEE 802.11s Mesh ID 7.3.2.88 of 802.11s draft 3.0 |
CIeMeshId | IEEE 802.11s Mesh ID 7.3.287 of 802.11s draft 3.0 |
CIeMeshIdChecker | |
CIeMeshIdValue | |
CIePeeringProtocol | |
CIePeerManagement | |
CIePerr | See 7.3.2.98 of 802.11s draft 2.07 |
CIePrep | See 7.3.2.97 of 802.11s draft 2.07 |
CIePreq | See 7.3.2.96 of 802.11s draft 2.07 |
CIeRann | See 7.3.2.95 of 802.11s draft 2.07 |
CMeshHeader | Mesh Control field, see IEEE 802.11s draft 3.0 section 7.1.3.5b |
CPeerLink | Peer link model for 802.11s Peer Management protocol |
►CPeerLinkCloseStart | 802.11s Peer link close management frame |
CPlinkCloseStartFields | Fields: |
►CPeerLinkConfirmStart | 802.11s Peer link confirm management frame |
CPlinkConfirmStartFields | Fields: |
►CPeerLinkOpenStart | 802.11s Peer link open management frame |
CPlinkOpenStartFields | Fields: |
►CPeerManagementProtocol | 802.11s Peer Management Protocol model |
CBeaconInfo | Keeps information about beacon of peer station: beacon interval, association ID, last time we have received a beacon |
CStatistics | |
►CPeerManagementProtocolMac | This is plugin to Mesh WiFi MAC, which implements interface to dot11s peer management protocol: it takes proper frames from MAC-layer, extracts peer link management information element and mesh configuration element and passes it to main part of protocol |
CPlinkFrameStart | This structure keeps all fields in peer link management frame, which are not subclasses of WifiInformationElement |
CStatistics | |
►Ndsdv | |
CDeferredRouteOutputTag | Tag used by DSDV implementation |
CDsdvHeader | DSDV Update Packet Format |
CIsExpired | |
CPacketQueue | DSDV Packet queue |
CQueueEntry | DSDV Queue Entry |
CRoutingProtocol | DSDV routing protocol |
CRoutingTable | The Routing table used by DSDV protocol |
CRoutingTableEntry | Routing table entry |
►Ndsr | |
CBlackList | BlackList description |
CCloseNeighbor | |
CDsrFsHeader | Dsr fixed size header Format |
CDsrNetworkQueue | Introspection did not find any typical Config paths |
CDsrNetworkQueueEntry | DSR Network Queue Entry |
CDsrOptionAck | Introspection did not find any typical Config paths |
CDsrOptionAckHeader | Acknowledgement (ACK) Message Format |
CDsrOptionAckReq | Introspection did not find any typical Config paths |
CDsrOptionAckReqHeader | Acknowledgement Request (ACK_RREQ) Message Format |
CDsrOptionField | |
►CDsrOptionHeader | Introspection did not find any typical Config paths |
CAlignment | Alignment requirements of an option header |
CDsrOptionPad1 | Introspection did not find any typical Config paths |
CDsrOptionPad1Header | Introspection did not find any typical Config paths |
CDsrOptionPadn | Introspection did not find any typical Config paths |
CDsrOptionPadnHeader | Introspection did not find any typical Config paths |
CDsrOptionRerr | Introspection did not find any typical Config paths |
CDsrOptionRerrHeader | Introspection did not find any typical Config paths |
CDsrOptionRerrUnreachHeader | Route Error (RERR) Unreachable node address option Message Format |
CDsrOptionRerrUnsupportHeader | Route Error (RERR) Unsupported option Message Format |
CDsrOptionRrep | Introspection did not find any typical Config paths |
CDsrOptionRrepHeader | Route Reply (RREP) Message Format |
CDsrOptionRreq | Introspection did not find any typical Config paths |
CDsrOptionRreqHeader | Route Request (RREQ) Message Format |
CDsrOptions | Introspection did not find any typical Config paths |
CDsrOptionSR | Introspection did not find any typical Config paths |
CDsrOptionSRHeader | Source Route (SR) Message Format |
CDsrRouting | Dsr Routing base |
CDsrRoutingHeader | Header of Dsr Routing |
CErrorBuffEntry | DSR Error Buffer Entry |
CErrorBuffer | DSR error buffer |
►CGraReply | Maintain the gratuitous reply |
CIsExpired | Check if the entry is expired or not |
CGraReplyEntry | |
CIsExpired | |
CLink | The route cache structure |
CLinkKey | The maintenance buffer is responsible for maintaining packet next hop delivery The data packet is saved in maintenance buffer whenever the data packet is sent out of send buffer |
CLinkStab | |
CMaintainBuffEntry | DSR Maintain Buffer Entry |
CMaintainBuffer | DSR maintain buffer |
CNetworkKey | |
CNodeStab | |
CPassiveBuffEntry | DSR Passive Buffer Entry |
CPassiveBuffer | DSR passive buffer |
CPassiveKey | |
CReceivedRreqEntry | The request entry for intermediate nodes to check if they have received this request or not This is used to control the duplication request from being processed |
►CRouteCache | DSR route request queue Since DSR is an on demand routing we queue requests while looking for route |
CNeighbor | The following code handles link-layer acks |
CRouteCacheEntry | |
►CRreqTable | Maintain list of RreqTable entry |
CIsExpired | Check if the entry is expired or not |
CRreqTableEntry | The route request table entries |
CSendBuffEntry | DSR Send Buffer Entry |
CSendBuffer | DSR send buffer |
►NFatalImpl | Implementation namespace for fatal error handlers |
►Nflame | |
CFlameHeader | Flame header |
►CFlameProtocol | FLAME routing protocol |
CStatistics | |
►CFlameProtocolMac | Interface MAC plugin FLAME routing protocol |
CStatistics | |
►CFlameRtable | Routing table for FLAME |
CLookupResult | Route lookup result, return type of LookupXXX methods |
CRoute | Routing table entry |
CFlameTag | Transmitter and receiver addresses |
►NHash | Hash function implementations |
►NExample | Namespace for hasher-example |
CCollider | Keep track of collisions |
CDictFiles | Source word list files |
CDictionary | Word list and hashers to test |
►NFunction | Hash functions |
CFnv1a | Fnv1a hash function implementation |
CHash32 | Template for creating a Hash::Implementation from a 32-bit hash function |
CHash64 | Template for creating a Hash::Implemetation from a 64-bit hash function |
CMurmur3 | Murmur3 hash function implementation |
CImplementation | Hash function implementation base class |
►Nint64x64 | |
►Ntest | |
CInt64x64ArithmeticTestCase | |
CInt64x64Bug1786TestCase | See Bug 1786 |
CInt64x64Bug455TestCase | See Bug 455 |
CInt64x64Bug863TestCase | See Bug 863 |
CInt64x64CompareTestCase | |
CInt64x64DoubleTestCase | |
CInt64x64HiLoTestCase | |
CInt64x64ImplTestCase | |
CInt64x64InputOutputTestCase | |
CInt64x64InputTestCase | |
CInt64x64InvertTestCase | |
CInt64x64TestSuite | |
CPrinter | Pretty printer for test cases |
CInt64x64TestSuite | |
►Ninternal | Namespace for implementation details |
CObjectPtrContainerChecker | ObjectPtrContainerChecker implementation class |
CPointerChecker | PointerChecker implementation |
►Nofi | |
CAction | Class for handling flow table actions |
CController | An interface for a Controller of OpenFlowSwitchNetDevices |
CDropController | Demonstration of a Drop controller |
CEricssonAction | Class for handling Ericsson Vendor-defined actions |
►CLearningController | Demonstration of a Learning controller |
CLearnedState | |
CPort | Port and its metadata |
►CStats | |
CFlowStatsState | State of the FlowStats request/reply |
CPortStatsState | State of the PortStats request/reply |
CStatsDumpCallback | Callback for a stats dump request |
CSwitchPacketMetadata | Packet Metadata, allows us to track the packet's metadata as it passes through the switch |
CVPortAction | Class for handling virtual port table actions |
►Nolsr | |
CAssociation | Association |
CAssociationTuple | An Association Tuple |
CBug780Test | See Bug 780 |
CDuplicateTuple | The type "list of interface addresses" |
CHelloRegressionTest | Trivial (still useful) test of OLSR operation |
CIfaceAssocTuple | An Interface Association Tuple |
CLinkTuple | A Link Tuple |
►CMessageHeader | Introspection did not find any typical Config paths |
►CHello | |
CLinkMessage | |
►CHna | |
CAssociation | |
CMid | |
CTc | |
CMprSelectorTuple | An MPR-Selector Tuple |
CNeighborTuple | A Neighbor Tuple |
COlsrState | This class encapsulates all data structures needed for maintaining internal state of an OLSR node |
CPacketHeader | Introspection did not find any typical Config paths |
CRoutingProtocol | OLSR routing protocol for IPv4 |
CRoutingTableEntry | An OLSR's routing table entry |
CTcRegressionTest | Less trivial test of OLSR Topology Control message generation |
CTopologyTuple | A Topology Tuple |
CTwoHopNeighborTuple | A 2-hop Tuple |
►CA2A4RsrqHandoverAlgorithm | Handover algorithm implementation based on RSRQ measurements, Event A2 and Event A4 |
CUeMeasure | Measurements reported by a UE for a cell ID |
CA3RsrpHandoverAlgorithm | Implementation of the strongest cell handover algorithm, based on RSRP measurements and Event A3 |
CAarfcdWifiManager | Implementation of the AARF-CD algorithmThis algorithm was first described in "Efficient Collision Detection for Auto Rate Fallback Algorithm" |
CAarfcdWifiRemoteStation | Hold per-remote-station state for AARF-CD Wifi manager |
CAarfWifiManager | AARF Rate control algorithmThis class implements the AARF rate control algorithm which was initially described in IEEE 802.11 Rate Adaptation: A Practical Approach, by M |
CAarfWifiRemoteStation | Hold per-remote-station state for AARF Wifi manager |
CAccessorHelper | Basic functionality for accessing class attributes via class data members, or get functor/set methods |
CAccessorTrait | The non-const and non-reference type equivalent to T |
CAcousticModemEnergyModel | WHOI micro-modem energy model |
CAcousticModemEnergyModelHelper | Assign AcousticModemEnergyModel to uan devices |
CAddress | Polymophic address class |
CAddressChecker | AttributeChecker implementation for AddressValue |
CAddressValue | AttributeValue implementation for Address |
CAdhocAlohaNoackIdealPhyHelper | Create the AlohaNoackNetDevice |
CAdhocWifiMac | |
CAllocationRetentionPriority | 3GPP 23.203 Section 6.1.7.3 Allocation and Retention Priority characteristics |
CAlohaNoackMacHeader | Introspection did not find any typical Config paths |
CAlohaNoackNetDevice | This devices implements the following features: |
CAmpduSubframeHeader | Introspection did not find any typical Config paths |
CAmpduTag | The aim of the AmpduTag is to provide means for a MAC to specify that a packet includes A-MPDU since this is done in HT-SIG and there is no HT-SIG representation in ns-3 |
CAmrrWifiManager | AMRR Rate control algorithmThis class implements the AMRR rate control algorithm which was initially described in IEEE 802.11 Rate Adaptation: A Practical Approach, by M |
CAmrrWifiRemoteStation | Hold per-remote-station state for AMRR Wifi manager |
CAmsduSubframeHeader | Introspection did not find any typical Config paths |
CAngles | Struct holding the azimuth and inclination angles of spherical coordinates |
►CAnimationInterface | Interface to network animator |
CAnimPacketInfo | |
CAnimXmlElement | |
CIpv4RoutePathElement | |
CIpv4RouteTrackElement | |
CLinkPairCompare | |
CLinkProperties | |
CNodeSize | |
CP2pLinkNodeIdPair | |
CRgb | |
CAnimByteTag | Byte tag using by Anim to uniquely identify packets |
CAntennaModel | Interface for antenna radiation pattern models |
CAodvHelper | Helper class that adds AODV routing to nodes |
CAparfWifiManager | APARF Power and rate control algorithm |
CAparfWifiRemoteStation | Hold per-remote-station state for APARF Wifi manager |
CApplication | The base class for all ns3 applications |
CApplicationContainer | Holds a vector of ns3::Application pointers |
CApplicationPacketProbe | Probe to translate from a TraceSource to two more easily parsed TraceSources |
CApWifiMac | Wi-Fi AP state machineHandle association, dis-association and authentication, of STAs within an infrastructure BSS |
CArfWifiManager | ARF Rate control algorithm |
CArfWifiRemoteStation | Hold per-remote-station state for ARF Wifi manager |
►CArpCache | An ARP cache |
CEntry | A record that that holds information about an ArpCache entry |
CArpHeader | The packet header for an ARP packet |
CArpL3Protocol | An implementation of the ARP protocol |
CArrayMatcher | Helper to test if an array entry matches a config path specification |
CAsciiFile | A class representing an ascii file |
CAsciiTraceHelper | Manage ASCII trace files for device models |
CAsciiTraceHelperForDevice | Base class providing common user-level ascii trace operations for helpers representing net devices |
CAsciiTraceHelperForIpv4 | Base class providing common user-level ascii trace operations for helpers representing IPv4 protocols |
CAsciiTraceHelperForIpv6 | Base class providing common user-level ascii trace operations for helpers representing IPv6 protocols |
CAsn1Header | This class has the purpose to encode Information Elements according to ASN.1 syntax, as defined in ITU-T X-691 |
CAthstatsHelper | Create AthstatsWifiTraceSink instances and connect them to wifi devices |
CAthstatsWifiTraceSink | Trace sink for wifi device that mimics madwifi's athstats tool |
CAttributeAccessor | Allow setting and getting the value of an attribute |
CAttributeChecker | Represent the type of an attribute |
►CAttributeConstructionList | List of Attribute name, value and checker triples used to construct Objects |
CItem | A single Attribute triple |
CAttributeDefaultIterator | |
CAttributeIterator | This class is used internally by ConfigStore and GtkConfigStore |
CAttributeValue | Hold a value for an Attribute |
CAverage | Simple average, min, max and std |
CBackoff | The backoff class is used for calculating backoff times when many net devices can write to the same channel |
CBandInfo | The building block of a SpectrumModel |
CBandwidthManager | This class manage the bandwidth request and grant mechanism |
CBandwidthRequestHeader | This class implements the bandwidth-request mac Header as described by IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems 6.3.2.1.2 Bandwidth request header, page 38 |
CBar | Block Ack Request |
CBaseStationNetDevice | |
CBasicEnergyHarvester | BasicEnergyHarvester increases remaining energy stored in an associated Energy Source |
CBasicEnergyHarvesterHelper | Creates a BasicEnergyHarvester object |
CBasicEnergySource | BasicEnergySource decreases/increases remaining energy stored in itself in linearly |
CBasicEnergySourceHelper | Creates a BasicEnergySource object |
CBinaryErrorModel | |
CBinaryErrorSixlowModel | |
CBlockAckAgreement | Maintains information for a block ack agreement |
CBlockAckCache | |
►CBlockAckManager | Manages all block ack agreements for an originator station |
CItem | A struct for packet, Wifi header, and timestamp |
CBooleanChecker | AttributeChecker implementation for BooleanValue |
CBooleanProbe | This class is designed to probe an underlying ns3 TraceSource exporting a bool |
CBooleanValue | AttributeValue implementation for Boolean |
CBoundCallbackArgument | This structure is used as interface between trace sources and RadioBearerStatsCalculator |
CBoundFunctorCallbackImpl | CallbackImpl for functors with first argument bound at construction |
CBox | 3d box |
CBoxChecker | AttributeChecker implementation for BoxValue |
CBoxValue | AttributeValue implementation for Box |
CBridgeChannel | Virtual channel implementation for bridges (BridgeNetDevice) |
CBridgeHelper | Add capability to bridge multiple LAN segments (IEEE 802.1D bridging) |
►CBridgeNetDevice | Virtual net device that bridges multiple LAN segments |
CLearnedState | Structure holding the status of an address |
►CBriteTopologyHelper | Interface with BRITE, the Boston university Representative Internet Topology gEnerator |
CBriteEdgeInfo | Edge information from BRITE |
CBriteNodeInfo | Node information from BRITE |
CBSLinkManager | |
CBsmApplication | Sends and receives the IEEE 1609 WAVE (Wireless Access in Vehicular Environments) Basic Safety Messages (BSMs) and uses the WaveBsmStats class to manage statistics about BSMs transmitted and received The BSM is a ~200-byte packet that is generally broadcast from every vehicle at a nominal rate of 10 Hz |
CBsrLteControlMessage | The uplink BsrLteControlMessage defines the specific extension of the CE element for reporting the buffer status report |
CBSScheduler | |
CBSSchedulerRtps | This class implements a simple downlink scheduler for rtPS flows |
CBSSchedulerSimple | |
CBsServiceFlowManager | |
►CBuffer | Automatically resized byte buffer |
CData | This data structure is variable-sized through its last member whose size is determined at allocation time and stored in the m_size field |
CIterator | Iterator in a Buffer instance |
CLocalStaticDestructor | Local static destructor structure |
CBufferSizeLevelBsr | |
CBuildBroadcastListElement_s | See section 4.3.11 buildBroadcastListElement |
CBuildDataListElement_s | See section 4.3.8 builDataListElement |
CBuilding | 3d building block |
CBuildingContainer | Keep track of a set of building pointers |
CBuildingList | |
CBuildingListPriv | Private implementation detail of the BuildingList API |
CBuildingsHelper | |
►CBuildingsPropagationLossModel | This model provides means for simulating the following propagation phenomena in the presence of buildings: |
CShadowingLoss | |
CBuildRarListElement_s | See section 4.3.10 buildRARListElement |
CBulkSendApplication | Send as much traffic as possible, trying to fill the bandwidth |
CBulkSendHelper | A helper to make it easier to instantiate an ns3::BulkSendApplication on a set of nodes |
CBurstErrorModel | Determine which bursts of packets are errored corresponding to an underlying distribution, burst rate, and burst size |
CBurstProfileManager | |
CBwPart_s | See section 4.3.28 bwPart |
►CByteTagIterator | Iterator over the set of byte tags in a packet |
CItem | Identifies a byte tag and a set of bytes within a packet to which the tag applies |
►CByteTagList | Keep track of the byte tags stored in a packet |
►CIterator | An iterator for iterating through a byte tag list |
CItem | An item specifies an individual tag within a byte buffer |
CByteTagListData | Internal representation of the byte tags stored in a packet |
CByteTagListDataFreeList | Container class for struct ByteTagListData |
CCalendarScheduler | Calendar queue event scheduler |
CCallback | Callback template class |
CCallbackBase | Base class for Callback class |
CCallbackChecker | AttributeChecker implementation for CallbackValue |
CCallbackImpl | The unqualified CallbackImpl class |
CCallbackImpl< R, empty, empty, empty, empty, empty, empty, empty, empty, empty > | CallbackImpl classes with varying numbers of argument types |
CCallbackImpl< R, T1, empty, empty, empty, empty, empty, empty, empty, empty > | CallbackImpl class with one argument |
CCallbackImpl< R, T1, T2, empty, empty, empty, empty, empty, empty, empty > | CallbackImpl class with two arguments |
CCallbackImpl< R, T1, T2, T3, empty, empty, empty, empty, empty, empty > | CallbackImpl class with three arguments |
CCallbackImpl< R, T1, T2, T3, T4, empty, empty, empty, empty, empty > | CallbackImpl class with four arguments |
CCallbackImpl< R, T1, T2, T3, T4, T5, empty, empty, empty, empty > | CallbackImpl class with five arguments |
CCallbackImpl< R, T1, T2, T3, T4, T5, T6, empty, empty, empty > | CallbackImpl class with six arguments |
CCallbackImpl< R, T1, T2, T3, T4, T5, T6, T7, empty, empty > | CallbackImpl class with seven arguments |
CCallbackImpl< R, T1, T2, T3, T4, T5, T6, T7, T8, empty > | CallbackImpl class with eight arguments |
CCallbackImplBase | Abstract base class for CallbackImpl Provides reference counting and equality test |
CCallbackTraits | Trait class to convert a pointer into a reference, used by MemPtrCallBackImpl |
CCallbackTraits< Ptr< T > > | Trait class to convert a pointer into a reference, used by MemPtrCallBackImpl |
CCallbackTraits< T * > | Trait class to convert a pointer into a reference, used by MemPtrCallBackImpl |
CCallbackValue | AttributeValue implementation for Callback |
CCandidateQueue | A Candidate Queue used in static routing |
CCapabilityInformation | Capability information |
CCaraWifiManager | Implement the CARA rate control algorithmImplement the CARA algorithm from: J |
CCaraWifiRemoteStation | Hold per-remote-station state for CARA Wifi manager |
CChannel | Abstract Channel Base Class |
CChannelCoordinationListener | Receive notifications about channel coordination events |
CChannelCoordinator | ChannelCoordinator deals with channel coordination in data plane (see 1609.4 chapter 5.2) |
CChannelList | List of simulation channels |
CChannelListPriv | Private implementation detail of the ChannelList API |
►CChannelManager | Manage 7 WaveChannels and the tx information such as data rate and txPowerLevel |
CWaveChannel | |
CChannelScheduler | This class will assign channel access for requests from higher layers |
CChunk | Abstract base class for ns3::Header and ns3::Trailer |
CCid | |
CCidFactory | This class is used exclusively by the BS to allocate CIDs to new connections |
CClassificationRuleVectorTlvValue | This class implements the classifier descriptor as a tlv vector |
CCoDelQueue | A CoDel packet queue |
CCoDelTimestampTag | CoDel time stamp, used to carry CoDel time informations |
►CCommandLine | Parse command-line arguments |
CCallbackItem | An argument Item using a Callback to parse the input |
CItem | The argument base class |
CUserItem | An argument Item assigning to POD |
CConfigImpl | Config system implementation class |
CConfigStore | Introspection did not find any typical Config paths |
CConnectionManager | The same connection manager class serves both for BS and SS though some functions are exclusive to only one of them |
CConstantAccelerationMobilityModel | Mobility model for which the current acceleration does not change once it has been set and until it is set again explicitely to a new value |
CConstantPositionMobilityModel | Mobility model for which the current position does not change once it has been set and until it is set again explicitely to a new value |
CConstantRandomVariable | The Random Number Generator (RNG) that returns a constant |
CConstantRateWifiManager | Use constant rates for data and RTS transmissions |
CConstantSpectrumPropagationLossModel | Introspection did not find any typical Config paths |
CConstantSpeedPropagationDelayModel | Propagation speed is constant |
CConstantVelocityHelper | Utility class used to move node with constant velocity |
CConstantVelocityMobilityModel | Mobility model for which the current speed does not change once it has been set and until it is set again explicitely to a new value |
CCoordinationListener | |
CCosineAntennaModel | Cosine Antenna Model |
CCost231PropagationLossModel | The COST-Hata-Model is the most often cited of the COST 231 models |
CCounterCalculator | Template class CounterCalculator |
CCqaFfMacScheduler | Implements the SCHED SAP and CSCHED SAP for the Channel and QoS Aware Scheduler |
CCqaSchedulerMemberCschedSapProvider | |
CCqaSchedulerMemberSchedSapProvider | |
CCqasFlowPerf_t | |
CCqiConfig_s | See section 4.3.19 cqiConfig |
CCqiListElement_s | See section 4.3.24 cqiListElement |
CCriticalSection | A class which provides a simple way to implement a Critical Section |
CCsmaChannel | Csma Channel |
CCsmaDeviceRec | CsmaNetDevice Record |
CCsmaHelper | Build a set of CsmaNetDevice objects |
CCsmaNetDevice | A Device for a Csma Network Link |
CCsmaStarHelper | A helper to make it easier to create a star topology with Csma links |
CCsParameters | |
CCsParamVectorTlvValue | This class implements the convergence sub-layer descriptor as a tlv vector |
CCtrlBAckRequestHeader | Headers for Block ack request |
CCtrlBAckResponseHeader | Headers for Block ack response |
CDataCalculator | Calculates data during a simulation |
CDataCollectionObject | Base class for data collection framework objects |
CDataCollector | Collects data |
CDataOutputCallback | Callback class for the DataOutput classes |
CDataOutputInterface | Abstract Data Output Interface class s |
CDataRate | Class for representing data rates |
CDataRateChecker | AttributeChecker implementation for DataRateValue |
CDataRateValue | AttributeValue implementation for DataRate |
►CDcaTxop | Handle packet fragmentation and retransmissions |
CDcf | |
CTransmissionListener | Listener for MacLow events |
CDcd | Introspection did not find any typical Config paths |
CDcdChannelEncodings | This class implements the DCD channel encodings as described by "IEEE Standard for
Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems" 11.4.1 DCD channel encodings, page 659 |
CDcf | Introspection did not find any typical Config paths |
CDcfManager | Manage a set of ns3::DcfStateHandle a set of independent ns3::DcfState, each of which represents a single DCF within a MAC stack |
CDcfState | Keep track of the state needed for a single DCF function |
CDefaultChannelScheduler | This class uses a simple mechanism to assign channel access with following features: (1) only in the context of single-PHY device; (2) FCFS (First come First service) strategy, which seems against the description of the standard (preemptive strategy) |
CDefaultDeleter | A template used to delete objects by the ns3::SimpleRefCount templates when the last reference to an object they manage disappears |
►CDefaultSimulatorImpl | The default single process simulator implementation |
CEventWithContext | Wrap an event with its execution context |
CDelayJitterEstimation | Quick and dirty delay and jitter estimation |
CDelayJitterEstimationTimestampTag | Tag to perform Delay and Jitter estimations |
CDestinationPoint | Keeps last movement schedule |
CDeterministicRandomVariable | The Random Number Generator (RNG) that returns a predetermined sequence |
CDeviceEnergyModel | Base class for device energy models |
CDeviceEnergyModelContainer | Holds a vector of ns3::DeviceEnergyModel pointers |
CDeviceEnergyModelHelper | Creates DeviceEnergyModel objects |
CDeviceNameTag | This class implements a tag that carries the ns3 device name from where a packet is coming |
CDistributedSimulatorImpl | Distributed simulator implementation using lookahead |
CDlCqiLteControlMessage | The downlink CqiLteControlMessage defines an ideal list of feedback about the channel quality sent by the UE to the eNodeB |
CDlDciListElement_s | See section 4.3.1 dlDciListElement |
CDlDciLteControlMessage | The Downlink Data Control Indicator messages defines the RB allocation for the users in the downlink |
CDlFramePrefixIe | This class implements the DL Frame Prefix IE as described by IEEE-802.16 standard |
CDlHarqFeedbackLteControlMessage | The downlink DlHarqFeedbackLteControlMessage defines the specific messages for transmitting the DL HARQ feedback through PUCCH |
CDlInfoListElement_s | See section 4.3.23 dlInfoListElement |
CDlMap | Introspection did not find any typical Config paths |
CDot11sStack | Helper class to allow easy installation of 802.11s stack |
CDoubleChecker | AttributeChecker implementation for DoubleValue |
CDoubleProbe | This class is designed to probe an underlying ns3 TraceSource exporting a double |
CDoubleValue | This class can be used to hold variables of floating point type such as 'double' or 'float' |
CDownlinkLteGlobalPathlossDatabase | Store the last pathloss value for each TX-RX pair for downlink |
CDrbActivator | DrbActivatior allows user to activate bearers for UEs when EPC is not used |
CDropTailQueue | A FIFO packet queue that drops tail-end packets on overflow |
CDrxConfig_s | See section 4.3.16 drxConfig |
CDsaAck | Introspection did not find any typical Config paths |
CDsaReq | Introspection did not find any typical Config paths |
CDsaRsp | Introspection did not find any typical Config paths |
CDsdvHelper | Helper class that adds DSDV routing to nodes |
CDsrHelper | |
CDsrMainHelper | Helper class that adds DSR routing to nodes |
CDsrRoutingHeader | Introspection did not find any typical Config paths |
CDsssErrorRateModel | Implementation of DSSS error rate modelThe 802.11b modulations: |
CEdcaParameter | |
►CEdcaTxopN | This queue contains packets for a particular access class |
CAggregationCapableTransmissionListener | |
CDcf | |
CTransmissionListener | |
►CEmpiricalRandomVariable | The Random Number Generator (RNG) that has a specified empirical distribution |
CValueCDF | Helper to hold one point of the CDF |
Cempty | Make Callback use a separate empty type |
CEmptyAttributeValue | A class for an empty attribute value |
CEmuEpcHelper | Create an EPC network using EmuFdNetDevice |
CEmuFdNetDeviceHelper | Build a set of FdNetDevice objects attached to a physical network interface |
CEnbMacMemberFfMacCschedSapUser | |
CEnbMacMemberFfMacSchedSapUser | |
CEnbMacMemberLteEnbCmacSapProvider | |
CEnbMacMemberLteEnbPhySapUser | |
CEnbMacMemberLteMacSapProvider | |
CEnbMemberLteEnbPhySapProvider | |
CEnbRrcMemberLteEnbCmacSapUser | Class for forwarding CMAC SAP User functions |
CEnergyHarvester | Energy harvester base class |
CEnergyHarvesterContainer | Holds a vector of ns3::EnergyHarvester pointers |
CEnergyHarvesterHelper | Creates EnergyHarvester objects |
CEnergySource | Introspection did not find any typical Config paths |
CEnergySourceContainer | Holds a vector of ns3::EnergySource pointers |
CEnergySourceHelper | Creates EnergySource objects |
CEnumChecker | AttributeChecker implementation for EnumValue |
CEnumValue | Hold variables of type enum |
►CEpcEnbApplication | This application is installed inside eNBs and provides the bridge functionality for user data plane packets between the radio interface and the S1-U interface |
CEpsFlowId_t | |
►CEpcEnbS1SapProvider | This class implements the Service Access Point (SAP) between the LteEnbRrc and the EpcEnbApplication |
CBearerToBeSwitched | |
CPathSwitchRequestParameters | |
►CEpcEnbS1SapUser | This class implements the Service Access Point (SAP) between the LteEnbRrc and the EpcEnbApplication |
CDataRadioBearerSetupRequestParameters | Parameters passed to DataRadioBearerSetupRequest () |
CPathSwitchRequestAcknowledgeParameters | |
CEpcHelper | Base helper class to handle the creation of the EPC entities |
►CEpcMme | This object implements the MME functionality |
CBearerInfo | Hold info on an EPS bearer to be activated |
CEnbInfo | Hold info on a ENB |
CUeInfo | Hold info on a UE |
►CEpcS11Sap | |
CFteid | Fully-qualified TEID, see 3GPP TS 29.274 section 8.22 |
CGtpcMessage | |
CUli | TS 29.274 8.21 User Location Information (ULI) |
►CEpcS11SapMme | MME side of the S11 Service Access Point (SAP), provides the MME methods to be called when an S11 message is received by the MME |
CBearerContextCreated | 3GPP TS 29.274 version 8.3.1 Release 8 section 8.28 |
CBearerContextRemoved | |
CCreateSessionResponseMessage | Create Session Response message, see 3GPP TS 29.274 7.2.2 |
CDeleteBearerRequestMessage | Delete Bearer Request message, see 3GPP TS 29.274 Release 9 V9.3.0 section 7.2.9.2 |
CModifyBearerResponseMessage | Modify Bearer Response message, see 3GPP TS 29.274 7.2.7 |
►CEpcS11SapSgw | SGW side of the S11 Service Access Point (SAP), provides the SGW methods to be called when an S11 message is received by the SGW |
CBearerContextRemovedSgwPgw | |
CBearerContextToBeCreated | |
CBearerContextToBeRemoved | |
CCreateSessionRequestMessage | Create Session Request message, see 3GPP TS 29.274 7.2.1 |
CDeleteBearerCommandMessage | Delete Bearer Command message, see 3GPP TS 29.274 Release 9 V9.3.0 section 7.2.17.1 |
CDeleteBearerResponseMessage | Delete Bearer Response message, see 3GPP TS 29.274 Release 9 V9.3.0 section 7.2.10.2 |
CModifyBearerRequestMessage | Modify Bearer Request message, see 3GPP TS 29.274 7.2.7 |
CEpcS1apSap | |
►CEpcS1apSapEnb | ENB side of the S1-AP Service Access Point (SAP), provides the eNB methods to be called when an S1-AP message is received by the eNB |
CErabSwitchedInUplinkItem | E-RABs Switched in Uplink Item IE, see 3GPP TS 36.413 9.1.5.9 |
CErabToBeSetupItem | |
►CEpcS1apSapMme | MME side of the S1-AP Service Access Point (SAP), provides the MME methods to be called when an S1-AP message is received by the MME |
CErabSetupItem | E-RAB Setup Item IEs, see 3GPP TS 36.413 9.1.4.2 |
CErabSwitchedInDownlinkItem | E-RABs Switched in Downlink Item IE, see 3GPP TS 36.413 9.1.5.8 |
CErabToBeReleasedIndication | E-RAB Release Indication Item IEs, 3GPP TS 36.413 version 9.8.0 section 9.1.3.7 |
►CEpcSgwPgwApplication | This application implements the SGW/PGW functionality |
CEnbInfo | |
CUeInfo | Store info for each UE connected to this SGW |
CEpcTestRrc | RRC stub providing a testing S1 SAP user to be used with the EpcEnbApplication |
►CEpcTft | This class implements the EPS bearer Traffic Flow Template (TFT), which is the set of all packet filters associated with an EPS bearer |
CPacketFilter | Implement the data structure representing a TrafficFlowTemplate Packet Filter |
CEpcTftClassifier | Classifies IP packets accoding to Traffic Flow Templates (TFTs) |
►CEpcUeNas | |
CBearerToBeActivated | |
CEpcX2 | This entity is installed inside an eNB and provides the functionality for the X2 interface |
CEpcX2HandoverPreparationFailureHeader | Introspection did not find any typical Config paths |
CEpcX2HandoverRequestAckHeader | Introspection did not find any typical Config paths |
CEpcX2HandoverRequestHeader | Introspection did not find any typical Config paths |
CEpcX2Header | Introspection did not find any typical Config paths |
CEpcX2LoadInformationHeader | Introspection did not find any typical Config paths |
CEpcX2ResourceStatusUpdateHeader | Introspection did not find any typical Config paths |
►CEpcX2Sap | The X2 SAP defines the service between the X2 entity and the RRC entity |
CCellInformationItem | Cell Information Item as it is used in the LOAD INFORMATION message |
CCellMeasurementResultItem | Cell Measurement Result Item as it is used in the RESOURCE STATUS UPDATE message |
CCompositeAvailCapacity | Composite Available Capacity as it is used in the RESOURCE STATUS UPDATE message |
CErabAdmittedItem | E-RABs admitted item as it is used in the HANDOVER REQUEST ACKNOWLEDGE message |
CErabNotAdmittedItem | E-RABs not admitted item as it is used in the HANDOVER REQUEST ACKNOWLEDGE message |
CErabsSubjectToStatusTransferItem | |
CErabToBeSetupItem | E-RABs to be setup item as it is used in the HANDOVER REQUEST message |
CHandoverPreparationFailureParams | Parameters of the HANDOVER PREPARATION FAILURE message |
CHandoverRequestAckParams | Parameters of the HANDOVER REQUEST ACKNOWLEDGE message |
CHandoverRequestParams | Parameters of the HANDOVER REQUEST message |
CLoadInformationParams | Parameters of the LOAD INFORMATION message |
CRelativeNarrowbandTxBand | Relative Narrowband Tx Power (RNTP) as it is used in the LOAD INFORMATION message |
CResourceStatusUpdateParams | Parameters of the RESOURCE STATUS UPDATE message |
CSnStatusTransferParams | Parameters of the SN STATUS TRANSFER message |
CUeContextReleaseParams | Parameters of the UE CONTEXT RELEASE message |
CUeDataParams | Parameters of the UE DATA primitive |
CUlHighInterferenceInformationItem | UL High Interference Information as it is used in the LOAD INFORMATION message |
CEpcX2SapProvider | These service primitives of this part of the X2 SAP are provided by the X2 entity and issued by RRC entity |
CEpcX2SapUser | These service primitives of this part of the X2 SAP are provided by the RRC entity and issued by the X2 entity |
CEpcX2SnStatusTransferHeader | Introspection did not find any typical Config paths |
CEpcX2SpecificEpcX2SapProvider | |
CEpcX2SpecificEpcX2SapUser | |
CEpcX2UeContextReleaseHeader | Introspection did not find any typical Config paths |
CEpsBearer | This class contains the specification of EPS Bearers |
CEpsBearerTag | Tag used to define the RNTI and EPS bearer ID for packets interchanged between the EpcEnbApplication and the LteEnbNetDevice |
CErlangRandomVariable | The Erlang distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically |
CErrorChannel | A Error channel, introducing deterministic delays on even/odd packets |
CErrorChannelSixlow | A Error channel, introducing deterministic delays on even/odd packets |
CErrorModel | General error model that can be used to corrupt packets |
CErrorRateModel | Interface for Wifi's error models |
CEthernetHeader | Packet header for Ethernet |
CEthernetTrailer | Packet trailer for Ethernet |
CEutraChannelNumbers | Table 5.7.3-1 "E-UTRA channel numbers" from 3GPP TS 36.101 The table was converted to C syntax doing a cut & paste from TS 36.101 and running the following filter: awk '{if ((NR % 7) == 1) printf("{"); printf ("%s",$0); if ((NR % 7) == 0) printf("},\n"); else printf(", ");}' | sed 's/ – /, /g' |
CEutranMeasurementMapping | Implements the E-UTRA measurement mappings defined in 3GPP TS 36.133 section 9.1 E-UTRAN measurements |
►CEventGarbageCollector | An object that tracks scheduled events and automatically cancels them when it is destroyed |
CEventIdLessThanTs | Comparison operator for std::multiset |
CEventId | An identifier for simulation events |
CEventImpl | A simulation event |
CEventMemberImplObjTraits | Helper for the MakeEvent functions which take a class method |
CEventMemberImplObjTraits< Ptr< T > > | Helper for the MakeEvent functions which take a class method |
CEventMemberImplObjTraits< T * > | Helper for the MakeEvent functions which take a class method |
CExponentialRandomVariable | The exponential distribution Random Number Generator (RNG) |
CExtendedSupportedRatesIE | The Extended Supported Rates Information ElementThis class knows how to serialise and deserialise the Extended Supported Rates Element that holds (non-HT) rates beyond the 8 that the original Supported Rates element can carry |
CFdBetFfMacScheduler | Implements the SCHED SAP and CSCHED SAP for a Frequency Domain Blind Equal Throughput scheduler |
CFdBetSchedulerMemberCschedSapProvider | |
CFdBetSchedulerMemberSchedSapProvider | |
CfdbetsFlowPerf_t | |
CFdMtFfMacScheduler | Implements the SCHED SAP and CSCHED SAP for a Frequency Domain Maximize Throughput scheduler |
CFdMtSchedulerMemberCschedSapProvider | |
CFdMtSchedulerMemberSchedSapProvider | |
CFdNetDevice | NetDevice to read/write network traffic from/into a file descriptor |
CFdNetDeviceFdReader | This class performs the actual data reading from the sockets |
CFdNetDeviceHelper | Build a set of FdNetDevice objects Normally we eschew multiple inheritance, however, the classes PcapUserHelperForDevice and AsciiTraceUserHelperForDevice are treated as "mixins" |
►CFdReader | A class that asynchronously reads from a file descriptor |
CData | A structure representing data read |
CFdTbfqFfMacScheduler | Implements the SCHED SAP and CSCHED SAP for a Frequency Domain Token Bank Fair Queue scheduler |
CFdTbfqSchedulerMemberCschedSapProvider | |
CFdTbfqSchedulerMemberSchedSapProvider | |
CfdtbfqsFlowPerf_t | Flow information |
►CFfMacCschedSapProvider | Provides the CSCHED SAP |
CCschedCellConfigReqParameters | Parameters of the API primitives |
CCschedLcConfigReqParameters | Parameters of the CSCHED_LC_CONFIG_REQ primitive |
CCschedLcReleaseReqParameters | Parameters of the CSCHED_LC_RELEASE_REQ primitive |
CCschedUeConfigReqParameters | Parameters of the CSCHED_UE_CONFIG_REQ primitive |
CCschedUeReleaseReqParameters | Parameters of the CSCHED_UE_RELEASE_REQ primitive |
►CFfMacCschedSapUser | |
CCschedCellConfigCnfParameters | Parameters of the API primitives |
CCschedCellConfigUpdateIndParameters | Parameters of the CSCHED_CELL_CONFIG_UPDATE_IND primitive |
CCschedLcConfigCnfParameters | Parameters of the CSCHED_LC_CONFIG_CNF primitive |
CCschedLcReleaseCnfParameters | Parameters of the CSCHED_LC_RELEASE_CNF primitive |
CCschedUeConfigCnfParameters | Parameters of the CSCHED_UE_CONFIG_CNF primitive |
CCschedUeConfigUpdateIndParameters | Parameters of the CSCHED_UE_CONFIG_UPDATE_IND primitive |
CCschedUeReleaseCnfParameters | Parameters of the CSCHED_UE_RELEASE_CNF primitive |
►CFfMacSchedSapProvider | Provides the SCHED SAP |
CSchedDlCqiInfoReqParameters | Parameters of the SCHED_DL_CQI_INFO_REQ primitive |
CSchedDlMacBufferReqParameters | Parameters of the SCHED_DL_MAC_BUFFER_REQ primitive |
CSchedDlPagingBufferReqParameters | Parameters of the SCHED_DL_PAGING_BUFFER_REQ primitive |
CSchedDlRachInfoReqParameters | Parameters of the SCHED_DL_RACH_INFO_REQ primitive |
CSchedDlRlcBufferReqParameters | Parameters of the API primitives |
CSchedDlTriggerReqParameters | Parameters of the SCHED_DL_TRIGGER_REQ primitive |
CSchedUlCqiInfoReqParameters | Parameters of the SCHED_UL_CQI_INFO_REQ primitive |
CSchedUlMacCtrlInfoReqParameters | Parameters of the SCHED_UL_MAC_CTRL_INFO_REQ primitive |
CSchedUlNoiseInterferenceReqParameters | Parameters of the SCHED_UL_NOISE_INTERFERENCE_REQ primitive |
CSchedUlSrInfoReqParameters | Parameters of the SCHED_UL_SR_INFO_REQ primitive |
CSchedUlTriggerReqParameters | Parameters of the SCHED_UL_TRIGGER_REQ primitive |
►CFfMacSchedSapUser | |
CSchedDlConfigIndParameters | Parameters of the API primitives |
CSchedUlConfigIndParameters | Parameters of the SCHED_UL_CONFIG_IND primitive |
CFfMacScheduler | This abstract base class identifies the interface by means of which the helper object can plug on the MAC a scheduler implementation based on the FF MAC Sched API |
CFfrEnhancedDownlinkDefaultConfiguration | |
CFfrEnhancedUplinkDefaultConfiguration | |
CFfrSoftDownlinkDefaultConfiguration | |
CFfrSoftUplinkDefaultConfiguration | |
CFileAggregator | This aggregator sends values it receives to a file |
CFileConfig | |
CFileHelper | Helper class used to put data values into a file |
CFixedRoomPositionAllocator | Generate a random position uniformly distributed in the volume of a chosen room inside a chosen building |
CFixedRssLossModel | Return a constant received power level independent of the transmit power |
CFlameStack | Helper class used to install FLAME mesh stack (actually single protocol in this stack) |
CFlowClassifier | Provides a method to translate raw packet data into abstract flow identifier and packet identifier parameters |
CFlowIdTag | Introspection did not find any typical Config paths |
►CFlowMonitor | An object that monitors and reports back packet flows observed during a simulation |
CFlowStats | Structure that represents the measured metrics of an individual packet flow |
CTrackedPacket | Structure to represent a single tracked packet data |
CFlowMonitorHelper | Helper to enable IP flow monitoring on a set of Nodes |
►CFlowProbe | Responsible for listening for packet events in a specific point of the simulated space, report those events to the global FlowMonitor, and collect its own flow statistics regarding only the packets that pass through that probe |
CFlowStats | Structure to hold the statistics of a flow |
CFragmentationSubheader | This class implements the fragmentation sub-header as described by IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems 6.3.2.2.1 Fragmentation subheader, page 39 |
CFrHardDownlinkDefaultConfiguration | |
CFrHardUplinkDefaultConfiguration | |
CFriisPropagationLossModel | Friis propagation loss model |
CFriisSpectrumPropagationLossModel | Introspection did not find any typical Config paths |
CFrSoftDownlinkDefaultConfiguration | |
CFrSoftUplinkDefaultConfiguration | |
CFrStrictDownlinkDefaultConfiguration | |
CFrStrictUplinkDefaultConfiguration | |
CFunctorCallbackImpl | CallbackImpl with functors |
CGammaRandomVariable | The gamma distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically |
CGaussMarkovMobilityModel | Gauss-Markov mobility model |
CGbrQosInformation | 3GPP TS 36.143 9.2.1.18 GBR QoS Information |
CGenericMacHeader | This class implements the Generic mac Header as described by IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems 6.3.2.1.1 Generic MAC header, page 36 |
CGeographicPositions | Consists of methods dealing with Earth geographic coordinates and locations |
CGlobalRouteManager | A global global router |
CGlobalRouteManagerImpl | A global router implementation |
CGlobalRouteManagerLSDB | The Link State DataBase (LSDB) of the Global Route Manager |
CGlobalRouter | An interface aggregated to a node to provide global routing info |
CGlobalRoutingLinkRecord | A single link record for a link state advertisement |
CGlobalRoutingLSA | Link State Advertisement (LSA) for a router, used in global routing |
CGlobalValue | Hold a so-called 'global value' |
CGnuplot | Simple class to generate gnuplot-ready plotting commands from a set of datasets |
►CGnuplot2dDataset | Class to represent a 2D points plot |
CData2d | Structure storing the data to for a 2D plot |
CPoint | A point in a 2D plot |
►CGnuplot2dFunction | Class to represent a 2D function expression plot |
CFunction2d | Structure storing the function to be used for a 2D plot |
►CGnuplot3dDataset | Class to represent a 3D points plot |
CData3d | Structure storing the data for a 3D plot |
CPoint | A point in a 3D plot |
►CGnuplot3dFunction | Class to represent a 3D function expression plot |
CFunction3d | Structure storing the function to be used for a 3D plot |
CGnuplotAggregator | This aggregator produces output used to make gnuplot plots |
CGnuplotCollection | Simple class to group together multiple gnuplots into one file, e.g |
►CGnuplotDataset | Abstract class to store a plot line to be used by ns3::Gnuplot |
CData | Structure storing the data to plot |
CGnuplotHelper | Helper class used to make gnuplot plots |
CGrantedTimeWindowMpiInterface | Interface between ns-3 and MPI |
CGrantManagementSubheader | Introspection did not find any typical Config paths |
CGridBuildingAllocator | Allocate buildings on a rectangular 2d grid |
CGridPositionAllocator | Allocate positions on a rectangular 2d grid |
CGtkConfigStore | A class that provides a GTK-based front end to ns3::ConfigStore |
CGtpuHeader | Implementation of the GTPv1-U Release 10 as per 3Gpp TS 29.281 document |
CHalfDuplexIdealPhy | This PHY layer implementation realizes an ideal OFDM PHY which transmits half-duplex (i.e., it can either receive or transmit at a given time) |
CHalfDuplexIdealPhySignalParameters | Signal parameters for HalfDuplexIdealPhy |
CHandoverPreparationInfoHeader | This class manages the serialization/deserialization of HandoverPreparationInfo IE |
CHarqProcessInfoElement_t | |
CHasher | Generic Hash function interface |
CHeader | Protocol header serialization and deserialization |
CHeapScheduler | Binary heap event scheduler |
CHierarchicalMobilityModel | Hierarchical mobility model |
CHigherLayerSelected_s | See section 4.3.27 higherLayerSelected |
CHigherLayerTxVectorTag | This tag will be used to support higher layer control DataRate and TxPwr_Level for transmission |
CHighLatencyCtsToSelfTxVectorTag | |
CHighLatencyDataTxVectorTag | |
CHighLatencyRtsTxVectorTag | |
CHighSpeedImportantValues | |
CHistogram | Class used to store data and make an histogram of the data frequency |
CHtCapabilities | The HT Capabilities Information ElementThis class knows how to serialise and deserialise the HT Capabilities Information Element |
CHtCapabilitiesChecker | AttributeChecker implementation for HtCapabilitiesValue |
CHtCapabilitiesValue | AttributeValue implementation for HtCapabilities |
CHtWifiMacHelper | Create HT-enabled MAC layers for a ns3::WifiNetDevice |
CHybridBuildingsPropagationLossModel | The HybridBuildingsPropagationModel is a compound of different models able to evaluate the pathloss from 200 to 2600 MHz, in different environments and with buildings (i.e., indoor and outdoor communications) |
CIcmpv4DestinationUnreachable | Introspection did not find any typical Config paths |
CIcmpv4Echo | Introspection did not find any typical Config paths |
CIcmpv4Header | Introspection did not find any typical Config paths |
CIcmpv4L4Protocol | |
CIcmpv4TimeExceeded | Introspection did not find any typical Config paths |
CIcmpv6DestinationUnreachable | Introspection did not find any typical Config paths |
CIcmpv6Echo | Introspection did not find any typical Config paths |
CIcmpv6Header | Introspection did not find any typical Config paths |
CIcmpv6L4Protocol | An implementation of the ICMPv6 protocol |
CIcmpv6NA | Introspection did not find any typical Config paths |
CIcmpv6NS | Introspection did not find any typical Config paths |
CIcmpv6OptionHeader | Introspection did not find any typical Config paths |
CIcmpv6OptionLinkLayerAddress | Introspection did not find any typical Config paths |
CIcmpv6OptionMtu | Introspection did not find any typical Config paths |
CIcmpv6OptionPrefixInformation | Introspection did not find any typical Config paths |
CIcmpv6OptionRedirected | Introspection did not find any typical Config paths |
CIcmpv6ParameterError | Introspection did not find any typical Config paths |
CIcmpv6RA | Introspection did not find any typical Config paths |
CIcmpv6Redirection | Introspection did not find any typical Config paths |
CIcmpv6RS | Introspection did not find any typical Config paths |
CIcmpv6TimeExceeded | Introspection did not find any typical Config paths |
CIcmpv6TooBig | Introspection did not find any typical Config paths |
CIdealHandoverCommandHeader | |
CIdealHandoverPreparationInfoHeader | |
CIdealWifiManager | Ideal rate control algorithmThis class implements an 'ideal' rate control algorithm similar to RBAR in spirit (see A rate-adaptive MAC protocol for multihop wireless networks by G |
CIdealWifiRemoteStation | Hold per-remote-station state for Ideal Wifi manager |
CIeMeshIdChecker | AttributeChecker implementation for IeMeshIdValue |
CIeMeshIdValue | AttributeValue implementation for IeMeshId |
►CIidManager | TypeId information manager |
CIidInformation | The information record about a single type id |
CImsiLcidPair_t | |
CIndent | Helper to indent output a specified number of steps |
CInet6SocketAddress | An Inet6 address class |
CInetSocketAddress | Inet address class |
CInetTopologyReader | Topology file reader (Inet-format type) |
Cint64x64_t | High precision numerical type, implementing Q64.64 fixed precision |
CIntegerChecker | AttributeChecker implementation for IntegerValue |
CIntegerValue | Hold a signed integer type |
►CInterferenceHelper | Handles interference calculations |
CEvent | Signal event for a packet |
CNiChange | Noise and Interference (thus Ni) event |
CSnrPer | A struct for both SNR and PER |
CInternetStackHelper | Aggregate IP/TCP/UDP functionality to existing Nodes |
CIntToType | Convert an integer into a type |
CIpcsClassifier | |
►CIpcsClassifierRecord | |
Cipv4Addr | |
CPortRange | |
CIpL4Protocol | L4 Protocol abstract base class |
CIpv4 | Access to the Ipv4 forwarding table, interfaces, and configuration |
CIpv4Address | Ipv4 addresses are stored in host order in this class |
CIpv4AddressChecker | AttributeChecker implementation for Ipv4AddressValue |
CIpv4AddressGenerator | This generator assigns addresses sequentially from a provided network address; used in topology code |
►CIpv4AddressGeneratorImpl | Implementation class of Ipv4AddressGenerator This generator assigns addresses sequentially from a provided network address; used in topology code |
CEntry | This class holds the allocated addresses |
CNetworkState | This class holds the state for a given network |
CIpv4AddressHash | Class providing an hash for IPv4 addresses |
CIpv4AddressHelper | A helper class to make life easier while doing simple IPv4 address assignment in scripts |
►CIpv4AddressTlvValue | |
Cipv4Addr | |
CIpv4AddressValue | AttributeValue implementation for Ipv4Address |
CIpv4ClickRouting | Class to allow a node to use Click for external routing |
CIpv4EndPoint | A representation of an internet endpoint/connection |
CIpv4EndPointDemux | Demultiplexes packets to various transport layer endpoints |
►CIpv4FlowClassifier | Classifies packets by looking at their IP and TCP/UDP headers |
CFiveTuple | Structure to classify a packet |
CIpv4FlowProbe | Class that monitors flows at the IPv4 layer of a Node |
CIpv4FlowProbeTag | Tag used to allow a fast identification of the packet |
CIpv4GlobalRouting | Global routing protocol for IP version 4 stacks |
CIpv4GlobalRoutingHelper | Helper class that adds ns3::Ipv4GlobalRouting objects |
CIpv4Header | Packet header for IPv4 |
CIpv4Interface | The IPv4 representation of a network interface |
CIpv4InterfaceAddress | Class to store IPv4 address information on an interface |
CIpv4InterfaceContainer | Holds a vector of std::pair of Ptr<Ipv4> and interface index |
CIpv4L3ClickProtocol | Implement the Ipv4 layer specifically for Click nodes to allow a clean integration of Click |
►CIpv4L3Protocol | Implement the Ipv4 layer |
CFragments | A Set of Fragment belonging to the same packet (src, dst, identification and proto) |
CIpv4ListRouting | This class is a specialization of Ipv4RoutingProtocol that allows other instances of Ipv4RoutingProtocol to be inserted in a prioritized list |
CIpv4ListRoutingHelper | Helper class that adds ns3::Ipv4ListRouting objects |
CIpv4Mask | Class to represent an Ipv4 address mask |
CIpv4MaskChecker | AttributeChecker implementation for Ipv4MaskValue |
CIpv4MaskValue | AttributeValue implementation for Ipv4Mask |
CIpv4MulticastRoute | Ipv4 multicast route cache entry (similar to Linux struct mfc_cache) |
CIpv4MulticastRoutingTableEntry | A record of an IPv4 multicast route for Ipv4GlobalRouting and Ipv4StaticRouting |
CIpv4NixVectorHelper | Helper class that adds Nix-vector routing to nodes |
CIpv4NixVectorRouting | Nix-vector routing protocol |
CIpv4PacketInfoTag | This class implements Linux struct pktinfo in order to deliver ancillary information to the socket interface |
CIpv4PacketProbe | This class is designed to probe an underlying ns3 TraceSource exporting a packet, an IPv4 object, and an interface |
CIpv4RawSocketFactory | API to create RAW socket instances |
CIpv4RawSocketFactoryImpl | Implementation of IPv4 raw socket factory |
►CIpv4RawSocketImpl | Introspection did not find any typical Config paths |
CData | IPv4 raw data and additional information |
CIpv4Route | Ipv4 route cache entry (similar to Linux struct rtable) |
CIpv4RoutingHelper | Factory to create ns3::Ipv4RoutingProtocol objects |
CIpv4RoutingProtocol | Abstract base class for IPv4 routing protocols |
CIpv4RoutingTableEntry | A record of an IPv4 routing table entry for Ipv4GlobalRouting and Ipv4StaticRouting |
CIpv4StaticRouting | Static routing protocol for IP version 4 stacks |
CIpv4StaticRoutingHelper | Helper class that adds ns3::Ipv4StaticRouting objects |
CIpv6 | Access to the IPv6 forwarding table, interfaces, and configuration |
CIpv6Address | Describes an IPv6 address |
CIpv6AddressChecker | AttributeChecker implementation for Ipv6AddressValue |
CIpv6AddressGenerator | This generator assigns addresses sequentially from a provided network address; used in topology code |
►CIpv6AddressGeneratorImpl | Implementation class of Ipv6AddressGenerator This generator assigns addresses sequentially from a provided network address; used in topology code |
CEntry | This class holds the allocated addresses |
CNetworkState | This class holds the state for a given network |
CIpv6AddressHash | Hash function class for IPv6 addresses |
CIpv6AddressHelper | Helper class to auto-assign global IPv6 unicast addresses |
CIpv6AddressValue | AttributeValue implementation for Ipv6Address |
CIpv6AutoconfiguredPrefix | Router prefix information |
CIpv6EndPoint | A representation of an internet IPv6 endpoint/connection |
CIpv6EndPointDemux | Demultiplexor for end points |
CIpv6Extension | Introspection did not find any typical Config paths |
CIpv6ExtensionAH | Introspection did not find any typical Config paths |
CIpv6ExtensionAHHeader | Introspection did not find any typical Config paths |
CIpv6ExtensionDemux | Introspection did not find any typical Config paths |
CIpv6ExtensionDestination | Introspection did not find any typical Config paths |
CIpv6ExtensionDestinationHeader | Introspection did not find any typical Config paths |
CIpv6ExtensionESP | Introspection did not find any typical Config paths |
CIpv6ExtensionESPHeader | Introspection did not find any typical Config paths |
►CIpv6ExtensionFragment | Introspection did not find any typical Config paths |
CFragments | A Set of Fragment |
CIpv6ExtensionFragmentHeader | Introspection did not find any typical Config paths |
CIpv6ExtensionHeader | Introspection did not find any typical Config paths |
CIpv6ExtensionHopByHop | Introspection did not find any typical Config paths |
CIpv6ExtensionHopByHopHeader | Introspection did not find any typical Config paths |
CIpv6ExtensionLooseRouting | Introspection did not find any typical Config paths |
CIpv6ExtensionLooseRoutingHeader | Introspection did not find any typical Config paths |
CIpv6ExtensionRouting | Introspection did not find any typical Config paths |
CIpv6ExtensionRoutingDemux | Introspection did not find any typical Config paths |
CIpv6ExtensionRoutingHeader | Introspection did not find any typical Config paths |
►CIpv6FlowClassifier | Classifies packets by looking at their IP and TCP/UDP headers |
CFiveTuple | Structure to classify a packet |
CIpv6FlowProbe | Class that monitors flows at the IPv6 layer of a Node |
CIpv6FlowProbeTag | Tag used to allow a fast identification of the packet |
CIpv6Header | Introspection did not find any typical Config paths |
CIpv6Interface | The IPv6 representation of a network interface |
CIpv6InterfaceAddress | IPv6 address associated with an interface |
CIpv6InterfaceContainer | Keep track of a set of IPv6 interfaces |
CIpv6L3Protocol | IPv6 layer implementation |
CIpv6ListRouting | Introspection did not find any typical Config paths |
CIpv6ListRoutingHelper | Helper class that adds ns3::Ipv6ListRouting objects |
CIpv6MulticastRoute | IPv6 multicast route entry |
CIpv6MulticastRoutingTableEntry | A record of an IPv6 multicast route |
CIpv6Option | Introspection did not find any typical Config paths |
CIpv6OptionDemux | Introspection did not find any typical Config paths |
►CIpv6OptionHeader | Introspection did not find any typical Config paths |
CAlignment | Alignment requirements of an option header |
CIpv6OptionJumbogram | Introspection did not find any typical Config paths |
CIpv6OptionJumbogramHeader | Introspection did not find any typical Config paths |
CIpv6OptionPad1 | Introspection did not find any typical Config paths |
CIpv6OptionPad1Header | Introspection did not find any typical Config paths |
CIpv6OptionPadn | Introspection did not find any typical Config paths |
CIpv6OptionPadnHeader | Introspection did not find any typical Config paths |
CIpv6OptionRouterAlert | Introspection did not find any typical Config paths |
CIpv6OptionRouterAlertHeader | Introspection did not find any typical Config paths |
CIpv6PacketInfoTag | This class implements a tag that carries socket ancillary data to the socket interface |
CIpv6PacketProbe | This class is designed to probe an underlying ns3 TraceSource exporting a packet, an IPv6 object, and an interface |
CIpv6PmtuCache | This class implements the Path MTU cache, as defined by RFC 1981 |
CIpv6Prefix | Describes an IPv6 prefix |
CIpv6PrefixChecker | AttributeChecker implementation for Ipv6PrefixValue |
CIpv6PrefixValue | AttributeValue implementation for Ipv6Prefix |
CIpv6RawSocketFactory | API to create IPv6 RAW socket instances |
CIpv6RawSocketFactoryImpl | Implementation of IPv6 raw socket factory |
►CIpv6RawSocketImpl | Introspection did not find any typical Config paths |
CData | IPv6 raw data and additional information |
Cicmpv6Filter | Struct to hold the ICMPv6 filter |
CIpv6Route | IPv6 route cache entry |
CIpv6RoutingHelper | A factory to create ns3::Ipv6RoutingProtocol objects |
CIpv6RoutingProtocol | Abstract base class for Ipv6 routing protocols |
CIpv6RoutingTableEntry | A record of an IPv6 route |
CIpv6StaticRouting | Introspection did not find any typical Config paths |
CIpv6StaticRoutingHelper | Helper class that adds ns3::Ipv6StaticRouting objects |
CIsotropicAntennaModel | Isotropic antenna model |
CItuR1238PropagationLossModel | This class implements the ITU-R 1238 propagation loss model |
CItuR1411LosPropagationLossModel | ITU-R 1411 LOS propagation model |
CItuR1411NlosOverRooftopPropagationLossModel | ITU-R 1411 NLOS over rooftop propagation model |
►CJakesProcess | Implementation for a single path Stationary Jakes propagation loss model |
COscillator | This class Represents a single oscillator |
CJakesPropagationLossModel | Jakes narrowband propagation model |
CKun2600MhzPropagationLossModel | Empirical propagation model for the 2.6 GHz frequency |
CLbtsMessage | Structure used for all-reduce LBTS computation |
CLenaDeactivateBearerTestCase | |
CLenaTestBearerDeactivateSuite | |
CLiIonEnergySource | Model a generic Lithium Ion Battery basing on [1][2] |
CLiIonEnergySourceHelper | Creates a LiIonEnergySource object |
CLinearWifiTxCurrentModel | Linear model of the Wifi transmit current |
CListErrorModel | Provide a list of Packet uids to corrupt |
CListPositionAllocator | Allocate positions from a deterministic list specified by the user |
CListScheduler | Std::list event scheduler |
CLlcSnapHeader | Header for the LLC/SNAP encapsulation |
CLogComponent | A single log component configuration |
CLogDistancePropagationLossModel | Log distance propagation model |
CLogicalChannelConfigListElement_s | See section 4.3.4 logicalChannelConfigListElement |
CLogNormalRandomVariable | The log-normal distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically |
CLoopbackNetDevice | Virtual network interface that loops back any data sent to it to be immediately received on the same interface |
CLowDcfListener | Listener for NAV events |
CLrWpanCsmaCa | This class is a helper for the LrWpanMac to manage the Csma/CA state machine according to IEEE 802.15.4-2006, section 7.5.1.4 |
CLrWpanEdPower | Helper structure to manage the power measurement during ED |
CLrWpanErrorModel | Model the error rate for IEEE 802.15.4 2.4 GHz AWGN channel for OQPSK the model description can be found in IEEE Std 802.15.4-2006, section E.4.1.7 |
CLrWpanHelper | Helps to manage and create IEEE 802.15.4 NetDevice objects |
CLrWpanInterferenceHelper | This class provides helper functions for LrWpan interference handling |
CLrWpanLqiTag | Introspection did not find any typical Config paths |
►CLrWpanMac | Class that implements the LR-WPAN Mac state machine |
CTxQueueElement | Helper structure for managing transmission queue elements |
CLrWpanMacHeader | Represent the Mac Header with the Frame Control and Sequence Number fields |
CLrWpanMacTrailer | Represent the Mac Trailer with the Frame Check Sequence field |
CLrWpanNetDevice | Network layer to device interface |
CLrWpanPhy | Make LrWpanPhy a SpectrumPhy so we can enable the eventual modeling of device interference |
CLrWpanPhyDataAndSymbolRates | This data structure provides the Bit rate and Symbol rate for a given channel See IEEE802.15.4-2006 Table 1 and 2 in section 6.1.1 and 6.1.2 |
CLrWpanPhyPibAttributes | IEEE802.15.4-2006 PHY PIB Attributes Table 23 in section 6.4.2 |
CLrWpanPhyPpduHeaderSymbolNumber | This data structure provides number of symbols for the PPDU headers: SHR and PHR See IEEE802.15.4-2006 Figure 16, Table 19 and 20 in section 6.3 |
CLrWpanSpectrumModelInitializer | Helper class used to automatically initialize the LrWpan Spectrum Model objects |
CLrWpanSpectrumSignalParameters | Signal parameters for LrWpan |
CLrWpanSpectrumValueHelper | This class defines all functions to create spectrum model for LrWpan |
CLteAmc | Implements the Adaptive Modulation And Coding Scheme |
►CLteAnr | Automatic Neighbour Relation function |
CNeighbourRelation_t | Neighbour Relation between two eNodeBs (serving eNodeB and neighbour eNodeB) |
CLteAnrSapProvider | Service Access Point (SAP) offered by the ANR instance to the eNodeB RRC instance |
CLteAnrSapUser | Service Access Point (SAP) offered by the eNodeB RRC instance to the ANR instance |
CLteAsSapProvider | This class implements the Access Stratum (AS) Service Access Point (SAP), i.e., the interface between the EpcUeNas and the LteUeRrc |
CLteAsSapUser | This class implements the Access Stratum (AS) Service Access Point (SAP), i.e., the interface between the EpcUeNas and the LteUeRrc In particular, this class implements the User part of the SAP, i.e., the methods exported by the EpcUeNas and called by the LteUeRrc |
CLteChunkProcessor | This abstract class is used to process the time-vs-frequency SINR/interference/power chunk of a received LTE signal which was calculated by the LteInterference object |
CLteControlMessage | The LteControlMessage provides a basic implementations for control messages (such as PDCCH allocation map, CQI feedbacks) that are exchanged among eNodeB and UEs |
CLteDataRadioBearerInfo | Store information on active data radio bearer instance |
►CLteEnbCmacSapProvider | Service Access Point (SAP) offered by the eNB MAC to the eNB RRC See Femto Forum MAC Scheduler Interface Specification v 1.11, Figure 1 |
CAllocateNcRaPreambleReturnValue | |
CLcInfo | Logical Channel information to be passed to CmacSapProvider::ConfigureLc |
CRachConfig | Struct defining the RACH configuration of the MAC |
CUeConfig | Parameters for [re]configuring the UE |
►CLteEnbCmacSapUser | Service Access Point (SAP) offered by the MAC to the RRC See Femto Forum MAC Scheduler Interface Specification v 1.11, Figure 1 |
CUeConfig | Parameters for [re]configuring the UE |
CLteEnbCphySapProvider | Service Access Point (SAP) offered by the UE PHY to the UE RRC for control purposes |
CLteEnbCphySapUser | Service Access Point (SAP) offered by the UE PHY to the UE RRC for control purposes |
►CLteEnbMac | This class implements the MAC layer of the eNodeB device |
CNcRaPreambleInfo | Info associated with a preamble allocated for non-contention based RA |
CLteEnbNetDevice | The eNodeB device implementation |
CLteEnbPhy | LteEnbPhy models the physical layer for the eNodeB |
CLteEnbPhySapProvider | Service Access Point (SAP) offered by the eNB-PHY to the eNB-MAC |
CLteEnbPhySapUser | Service Access Point (SAP) offered by the eNB-PHY to the eNB-MAC |
►CLteEnbRrc | The LTE Radio Resource Control entity at the eNB |
CX2uTeidInfo | |
CLteEnbRrcProtocolIdeal | Models the transmission of RRC messages from the UE to the eNB in an ideal fashion, without errors and without consuming any radio resources |
CLteEnbRrcProtocolReal | Models the transmission of RRC messages from the UE to the eNB in a real fashion, by creating real RRC PDUs and transmitting them over Signaling Radio Bearers using radio resources allocated by the LTE MAC scheduler |
►CLteEnbRrcSapProvider | Part of the RRC protocol |
CCompleteSetupUeParameters | |
►CLteEnbRrcSapUser | Part of the RRC protocol |
CSetupUeParameters | |
CLteFfConverter | |
CLteFfrAlgorithm | The abstract base class of a Frequency Reuse algorithm |
►CLteFfrDistributedAlgorithm | Distributed Fractional Frequency Reuse algorithm implementation |
CUeMeasure | Measurements reported by a UE for a cell ID |
CLteFfrEnhancedAlgorithm | Enhanced Fractional Frequency Reuse algorithm implementation |
CLteFfrRrcSapProvider | Service Access Point (SAP) offered by the Frequency Reuse algorithm instance to the eNodeB RRC instance |
CLteFfrRrcSapUser | Service Access Point (SAP) offered by the eNodeB RRC instance to the Frequency Reuse algorithm instance |
CLteFfrSapProvider | Service Access Point (SAP) offered by the Frequency Reuse algorithm instance to the MAC Scheduler instance |
CLteFfrSapUser | Service Access Point (SAP) offered by the eNodeB RRC instance to the Frequency Reuse algorithm instance |
CLteFfrSimple | Simple Frequency Reuse algorithm implementation which uses only 1 sub-band |
CLteFfrSoftAlgorithm | Soft Fractional Frequency Reuse algorithm implementation |
CLteFlowId_t | |
CLteFrHardAlgorithm | Hard Frequency Reuse algorithm implementation which uses only 1 sub-band |
CLteFrNoOpAlgorithm | FR algorithm implementation which simply does nothing |
CLteFrSoftAlgorithm | Soft Frequency Reuse algorithm implementation |
CLteFrStrictAlgorithm | Strict Frequency Reuse algorithm implementation |
CLteGlobalPathlossDatabase | Store the last pathloss value for each TX-RX pair |
CLteHandoverAlgorithm | The abstract base class of a handover algorithm that operates using the Handover Management SAP interface |
CLteHandoverManagementSapProvider | Service Access Point (SAP) offered by the handover algorithm instance to the eNodeB RRC instance |
CLteHandoverManagementSapUser | Service Access Point (SAP) offered by the eNodeB RRC instance to the handover algorithm instance |
CLteHarqPhy | Implements the HARQ functionalities related to PHY layer (i.e., decodification buffers for incremental redundancy managment) |
CLteHelper | Creation and configuration of LTE entities |
CLteHexGridEnbTopologyHelper | This helper class allows to easily create a topology with eNBs grouped in three-sector sites layed out on an hexagonal grid |
CLteInterference | This class implements a gaussian interference model, i.e., all incoming signals are added to the total interference |
►CLteMacSapProvider | Service Access Point (SAP) offered by the MAC to the RLC See Femto Forum MAC Scheduler Interface Specification v 1.11, Figure 1 |
CReportBufferStatusParameters | Parameters for LteMacSapProvider::ReportBufferStatus |
CTransmitPduParameters | Parameters for LteMacSapProvider::TransmitPdu |
CLteMacSapUser | Service Access Point (SAP) offered by the MAC to the RLC See Femto Forum MAC Scheduler Interface Specification v 1.11, Figure 1 |
CLteMiErrorModel | This class provides the BLER estimation based on mutual information metrics |
CLteNetDevice | LteNetDevice provides basic implementation for all LTE network devices |
►CLtePdcp | LTE PDCP entity, see 3GPP TS 36.323 |
CStatus | Status variables of the PDCP |
CLtePdcpHeader | The packet header for the Packet Data Convergence Protocol (PDCP) packets |
►CLtePdcpSapProvider | Service Access Point (SAP) offered by the PDCP entity to the RRC entity See 3GPP 36.323 Packet Data Convergence Protocol (PDCP) specification |
CTransmitPdcpSduParameters | Parameters for LtePdcpSapProvider::TransmitPdcpSdu |
►CLtePdcpSapUser | Service Access Point (SAP) offered by the PDCP entity to the RRC entity See 3GPP 36.323 Packet Data Convergence Protocol (PDCP) specification |
CReceivePdcpSduParameters | Parameters for LtePdcpSapUser::ReceivePdcpSdu |
CLtePdcpSpecificLtePdcpSapProvider | |
CLtePdcpSpecificLtePdcpSapUser | |
CLtePdcpSpecificLteRlcSapUser | |
CLtePhy | The LtePhy models the physical layer of LTE |
CLtePhyTag | Tag used to define PHY parameters |
CLteRadioBearerInfo | Store information on active radio bearer instance |
CLteRadioBearerTag | Tag used to define the RNTI and LC id for each MAC packet trasmitted |
CLteRlc | This abstract base class defines the API to interact with the Radio Link Control (LTE_RLC) in LTE, see 3GPP TS 36.322 |
►CLteRlcAm | LTE RLC Acknowledged Mode (AM), see 3GPP TS 36.322 |
CPduBuffer | |
CRetxPdu | |
CLteRlcAmHeader | The packet header for the AM Radio Link Control (RLC) protocol packets |
CLteRlcHeader | The packet header for the Radio Link Control (RLC) protocol packets |
CLteRlcHeaderTestSuite | |
►CLteRlcSapProvider | Service Access Point (SAP) offered by the UM-RLC and AM-RLC entities to the PDCP entity See 3GPP 36.322 Radio Link Control (RLC) protocol specification |
CTransmitPdcpPduParameters | Parameters for LteRlcSapProvider::TransmitPdcpPdu |
CLteRlcSapUser | Service Access Point (SAP) offered by the UM-RLC and AM-RLC entities to the PDCP entity See 3GPP 36.322 Radio Link Control (RLC) protocol specification |
CLteRlcSduStatusTag | This class implements a tag that carries the status of a RLC SDU for the fragmentation process Status of RLC SDU |
CLteRlcSm | LTE_RLC Saturation Mode (SM): simulation-specific mode used for experiments that do not need to consider the layers above the LTE_RLC |
CLteRlcSpecificLteMacSapUser | |
CLteRlcSpecificLteRlcSapProvider | |
CLteRlcSpecificLteRlcSapUser | |
CLteRlcTm | LTE RLC Transparent Mode (TM), see 3GPP TS 36.322 |
CLteRlcUm | LTE RLC Unacknowledged Mode (UM), see 3GPP TS 36.322 |
►CLteRrcSap | Class holding definition common to all UE/eNodeB SAP Users/Providers |
CAntennaInfoDedicated | |
CAsConfig | |
CBlackCellsToAddMod | |
CCarrierBandwidthEutra | |
CCarrierFreqEutra | |
CCellAccessRelatedInfo | |
CCellSelectionInfo | |
CCellsToAddMod | |
CCgiInfo | |
CDrbToAddMod | |
CFreqInfo | |
CHandoverPreparationInfo | |
CLogicalChannelConfig | |
CMasterInformationBlock | |
CMeasConfig | |
CMeasGapConfig | |
CMeasIdToAddMod | |
CMeasObjectEutra | |
CMeasObjectToAddMod | |
CMeasResultEutra | |
CMeasResults | |
CMeasurementReport | |
CMobilityControlInfo | |
CMobilityStateParameters | |
CPdschConfigCommon | |
CPdschConfigDedicated | |
CPhysCellIdRange | |
CPhysicalConfigDedicated | |
CPlmnIdentityInfo | |
CPreambleInfo | |
CQuantityConfig | |
CRachConfigCommon | |
CRachConfigDedicated | |
CRadioResourceConfigCommon | |
CRadioResourceConfigCommonSib | |
CRadioResourceConfigDedicated | |
CRaSupervisionInfo | |
CReestabUeIdentity | |
CReportConfigEutra | Specifies criteria for triggering of an E-UTRA measurement reporting event |
CReportConfigToAddMod | |
CRlcConfig | |
CRrcConnectionReconfiguration | |
CRrcConnectionReconfigurationCompleted | |
CRrcConnectionReestablishment | |
CRrcConnectionReestablishmentComplete | |
CRrcConnectionReestablishmentReject | |
CRrcConnectionReestablishmentRequest | |
CRrcConnectionReject | |
CRrcConnectionRelease | |
CRrcConnectionRequest | |
CRrcConnectionSetup | |
CRrcConnectionSetupCompleted | |
CSoundingRsUlConfigCommon | |
CSoundingRsUlConfigDedicated | |
CSpeedStatePars | |
CSpeedStateScaleFactors | |
CSrbToAddMod | |
CSystemInformation | |
CSystemInformationBlockType1 | |
CSystemInformationBlockType2 | |
CThresholdEutra | Threshold for event evaluation |
CLteSignalingRadioBearerInfo | Store information on active signaling radio bearer instance |
CLteSimpleHelper | Creation and configuration of LTE entities |
CLteSimpleNetDevice | Implements the LTE simple net device |
CLteSimpleSpectrumPhy | The LteSimpleSpectrumPhy models the physical layer of LTE This class is used to test Frequency Reuse Algorithms, it allow to get SpectrumValue from channel and pass it to test script by trace mechanism |
CLteSpectrumModelId | |
CLteSpectrumPhy | The LteSpectrumPhy models the physical layer of LTE |
CLteSpectrumSignalParameters | Signal parameters for Lte |
CLteSpectrumSignalParametersDataFrame | Signal parameters for Lte Data Frame (PDSCH), and eventually after some control messages through other control channel embedded in PDSCH (i.e |
CLteSpectrumSignalParametersDlCtrlFrame | Signal parameters for Lte DL Ctrl Frame (RS, PCFICH and PDCCH) |
CLteSpectrumSignalParametersUlSrsFrame | Signal parameters for Lte SRS Frame |
CLteSpectrumValueCatcher | A sink to be plugged to the callback of LteChunkProcessor allowing to save and later retrieve the latest reported value |
CLteSpectrumValueHelper | This class defines all functions to create spectrum model for lte |
CLteStatsCalculator | Base class for ***StatsCalculator classes |
CLteTestMac | This class implements a testing loopback MAC layer |
CLteTestPdcp | This class implements a testing PDCP entity |
CLteTestRrc | This class implements a testing RRC entity |
CLteTestUePhy | |
►CLteUeCmacSapProvider | Service Access Point (SAP) offered by the UE MAC to the UE RRC |
CLogicalChannelConfig | |
CRachConfig | |
CLteUeCmacSapUser | Service Access Point (SAP) offered by the UE MAC to the UE RRC |
CLteUeConfig_t | Parameters for configuring the UE |
CLteUeCphySapProvider | Service Access Point (SAP) offered by the UE PHY to the UE RRC for control purposes |
►CLteUeCphySapUser | Service Access Point (SAP) offered by the UE PHY to the UE RRC for control purposes |
CUeMeasurementsElement | Parameters of the ReportUeMeasurements primitive: RSRP [dBm] and RSRQ [dB] See section 5.1.1 and 5.1.3 of TS 36.214 |
CUeMeasurementsParameters | |
►CLteUeMac | |
CLcInfo | |
CLteUeNetDevice | Implements the UE net device |
►CLteUePhy | The LteSpectrumPhy models the physical layer of LTE |
CPssElement | |
CUeMeasurementsElement | Summary results of measuring a specific cell. Used for layer-1 filtering |
CLteUePhySapProvider | Service Access Point (SAP) offered by the UE-PHY to the UE-MAC |
CLteUePhySapUser | Service Access Point (SAP) offered by the PHY to the MAC |
CLteUePowerControl | This class realizes Uplink Power Control functionality |
►CLteUeRrc | |
CMeasValues | Represents a measurement result from a certain cell |
CPendingTrigger_t | Represents a single triggered event from a measurement identity which reporting criteria have been fulfilled, but delayed by time-to-trigger |
CVarMeasConfig | Includes the accumulated configuration of the measurements to be performed by the UE |
CVarMeasReport | Represents a single measurement reporting entry., which includes information about a measurement for which the triggering conditions have been met |
CLteUeRrcProtocolIdeal | Models the transmission of RRC messages from the UE to the eNB in an ideal fashion, without errors and without consuming any radio resources |
CLteUeRrcProtocolReal | Models the transmission of RRC messages from the UE to the eNB in a real fashion, by creating real RRC PDUs and transmitting them over Signaling Radio Bearers using radio resources allocated by the LTE MAC scheduler |
►CLteUeRrcSapProvider | Part of the RRC protocol |
CCompleteSetupParameters | |
►CLteUeRrcSapUser | Part of the RRC protocol |
CSetupParameters | |
CMac16Address | This class can contain 16 bit addresses |
CMac16AddressChecker | AttributeChecker implementation for Mac16AddressValue |
CMac16AddressValue | AttributeValue implementation for Mac16Address |
CMac48Address | EUI-48 address |
CMac48AddressChecker | AttributeChecker implementation for Mac48AddressValue |
CMac48AddressValue | AttributeValue implementation for Mac48Address |
CMac64Address | EUI-64 address |
CMac64AddressChecker | AttributeChecker implementation for Mac64AddressValue |
CMac64AddressValue | AttributeValue implementation for Mac64Address |
CMacCeListElement_s | See section 4.3.14 macCEListElement |
CMacCeValue_u | See section 4.3.15 macCEValue |
CMacHeaderType | Represents the HT (Header Type) field of generic MAC and bandwidth request headers |
►CMacLow | Handle RTS/CTS/DATA/ACK transactions |
CItem | A struct for packet, Wifi header, and timestamp |
CMacLowAggregationCapableTransmissionListener | Listen for block ack events |
CMacLowDcfListener | Listen to NAV eventsThis class is typically connected to an instance of ns3::Dcf and calls to its methods are forwards to the corresponding ns3::Dcf methods |
CMacLowTransmissionListener | Listen to events coming from ns3::MacLow |
CMacLowTransmissionParameters | Control how a packet is transmitted |
CMacRxMiddle | This class handles duplicate detection and recomposition of fragments |
CMacStatsCalculator | Takes care of storing the information generated at MAC layer |
CMacTxMiddle | Handles sequence numbering of IEEE 802.11 data frames |
CManagementMessageType | Introspection did not find any typical Config paths |
CMapScheduler | Std::map event scheduler |
CMatrixPropagationLossModel | The propagation loss is fixed for each pair of nodes and doesn't depend on their actual positions |
CMcpsDataConfirmParams | MCPS-DATA.confirm params |
CMcpsDataIndicationParams | MCPS-DATA.indication params |
CMcpsDataRequestParams | MCPS-DATA.request params |
CMeasurementReportHeader | This class manages the serialization/deserialization of MeasurementReport IE |
CMemberEpcEnbS1SapProvider | Template for the implementation of the EpcEnbS1SapProvider as a member of an owner class of type C to which all methods are forwarded |
CMemberEpcEnbS1SapUser | Template for the implementation of the EpcEnbS1SapUser as a member of an owner class of type C to which all methods are forwarded |
CMemberEpcS11SapMme | Template for the implementation of the EpcS11SapMme as a member of an owner class of type C to which all methods are forwarded |
CMemberEpcS11SapSgw | Template for the implementation of the EpcS11SapSgw as a member of an owner class of type C to which all methods are forwarded |
CMemberEpcS1apSapEnb | Template for the implementation of the EpcS1apSapEnb as a member of an owner class of type C to which all methods are forwarded |
CMemberEpcS1apSapMme | Template for the implementation of the EpcS1apSapMme as a member of an owner class of type C to which all methods are forwarded |
CMemberLteAnrSapProvider | Template for the implementation of the LteAnrSapProvider as a member of an owner class of type C to which all methods are forwarded |
CMemberLteAnrSapUser | Template for the implementation of the LteAnrSapUser as a member of an owner class of type C to which all methods are forwarded |
CMemberLteAsSapProvider | Template for the implementation of the LteAsSapProvider as a member of an owner class of type C to which all methods are forwarded |
CMemberLteAsSapUser | Template for the implementation of the LteAsSapUser as a member of an owner class of type C to which all methods are forwarded |
CMemberLteEnbCphySapProvider | Template for the implementation of the LteEnbCphySapProvider as a member of an owner class of type C to which all methods are forwarded |
CMemberLteEnbCphySapUser | Template for the implementation of the LteEnbCphySapUser as a member of an owner class of type C to which all methods are forwarded |
CMemberLteEnbRrcSapProvider | Template for the implementation of the LteEnbRrcSapProvider as a member of an owner class of type C to which all methods are forwarded |
CMemberLteEnbRrcSapUser | Template for the implementation of the LteEnbRrcSapUser as a member of an owner class of type C to which all methods are forwarded |
CMemberLteFfrRrcSapProvider | Template for the implementation of the LteFfrRrcSapProvider as a member of an owner class of type C to which all methods are forwarded |
CMemberLteFfrRrcSapUser | Template for the implementation of the LteFfrRrcSapUser as a member of an owner class of type C to which all methods are forwarded |
CMemberLteFfrSapProvider | Template for the implementation of the LteFfrSapProvider as a member of an owner class of type C to which all methods are forwarded |
CMemberLteFfrSapUser | Template for the implementation of the LteFfrSapUser as a member of an owner class of type C to which all methods are forwarded |
CMemberLteHandoverManagementSapProvider | Template for the implementation of the LteHandoverManagementSapProvider as a member of an owner class of type C to which all methods are forwarded |
CMemberLteHandoverManagementSapUser | Template for the implementation of the LteHandoverManagementSapUser as a member of an owner class of type C to which all methods are forwarded |
CMemberLteUeCphySapProvider | Template for the implementation of the LteUeCphySapProvider as a member of an owner class of type C to which all methods are forwarded |
CMemberLteUeCphySapUser | Template for the implementation of the LteUeCphySapUser as a member of an owner class of type C to which all methods are forwarded |
CMemberLteUeRrcSapProvider | Template for the implementation of the LteUeRrcSapProvider as a member of an owner class of type C to which all methods are forwarded |
CMemberLteUeRrcSapUser | Template for the implementation of the LteUeRrcSapUser as a member of an owner class of type C to which all methods are forwarded |
CMemPtrCallbackImpl | CallbackImpl for pointer to member functions |
CMeshHelper | Helper to create IEEE 802.11s mesh networks |
CMeshInformationElementVector | Introspection did not find any typical Config paths |
CMeshL2RoutingProtocol | Interface for L2 mesh routing protocol and mesh point communication |
►CMeshPointDevice | Virtual net device modeling mesh point |
CStatistics | |
CMeshStack | Prototype for class, which helps to install MAC-layer routing stack to ns3::MeshPointDevice |
CMeshWifiBeacon | Beacon is beacon header + list of arbitrary information elements |
►CMeshWifiInterfaceMac | Basic MAC of mesh point Wi-Fi interface |
CStatistics | |
CMeshWifiInterfaceMacPlugin | Common interface for mesh point interface MAC plugins |
CMgtAddBaRequestHeader | Implement the header for management frames of type add block ack request |
CMgtAddBaResponseHeader | Implement the header for management frames of type add block ack response |
CMgtAssocRequestHeader | Implement the header for management frames of type association request |
CMgtAssocResponseHeader | Implement the header for management frames of type association response |
CMgtBeaconHeader | Implement the header for management frames of type beacon |
CMgtDelBaHeader | Implement the header for management frames of type del block ack |
CMgtProbeRequestHeader | Implement the header for management frames of type probe request |
CMgtProbeResponseHeader | Implement the header for management frames of type probe response |
CMibLteControlMessage | Abstract model for broadcasting the Master Information Block (MIB) within the control channel (BCCH) |
CMicrowaveOvenSpectrumModel5MhzInitializer | |
CMicrowaveOvenSpectrumModel6MhzInitializer | |
CMicrowaveOvenSpectrumValueHelper | This class provides methods for the creation of SpectrumValue instances that mimic the Power Spectral Density of commercial microwave ovens based on the measurements reported in the following paper: Tanim M |
CMinMaxAvgTotalCalculator | Template class MinMaxAvgTotalCalculator |
CMinstrelWifiManager | Implementation of Minstrel Rate Control AlgorithmPorting Minstrel from Madwifi and Linux Kernel http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/minstrel |
CMinstrelWifiRemoteStation | Hold per-remote-station state for Minstrel Wifi manager |
CMobilityBuildingInfo | Mobility buildings information (to be used by mobility models) |
CMobilityHelper | Helper class used to assign positions and mobility models to nodes |
CMobilityModel | Keep track of the current position and velocity of an object |
CModelCreator | |
CModelNode | |
CModelTypeid | |
CModelTypeidCreator | |
CMpduAggregator | Abstract class that concrete mpdu aggregators have to implement |
CmpduInfo | |
CMpduStandardAggregator | Standard MPDU aggregator |
CMpiInterface | Singleton used to interface to the communications infrastructure when running NS3 in parallel |
CMpiReceiver | Class to aggregate to a NetDevice if it supports MPI capability |
CMsduAggregator | Abstract class that concrete msdu aggregators have to implement |
CMsduStandardAggregator | Standard MSDU aggregator |
CMultiModelSpectrumChannel | This SpectrumChannel implementation can handle the presence of SpectrumPhy instances which can use different spectrum models, i.e., different SpectrumModel |
CNakagamiPropagationLossModel | Nakagami-m fast fading propagation loss model |
CNameNode | Node in the naming tree |
CNames | A directory of name and Ptr<Object> associations that allows us to give any ns3 Object a name |
CNamesPriv | The singleton root Names object |
►CNdiscCache | Introspection did not find any typical Config paths |
CEntry | A record that holds information about an NdiscCache entry |
CNetDevice | Network layer to device interface |
CNetDeviceContainer | Holds a vector of ns3::NetDevice pointers |
CNistErrorRateModel | A model for the error rate for different modulations |
CNixVector | Neighbor-index data structure for nix-vector routing |
►CNode | A network Node |
CProtocolHandlerEntry | Protocol handler entry |
CNodeContainer | Keep track of a set of node pointers |
CNodeList | List of simulation nodes |
CNodeListPriv | Private implementation detail of the NodeList API |
CNonCommunicatingNetDevice | This class implements a device which does not communicate, in the sense that it does not interact with the above protocol stack |
CNonCopyable | A base class for (non-Singleton) objects which shouldn't be copied |
CNoneFileConfig | |
CNoOpHandoverAlgorithm | Handover algorithm implementation which simply does nothing |
CNormalRandomVariable | The normal (Gaussian) distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically |
CNqosWaveMacHelper | |
CNqosWifiMacHelper | Create non QoS-enabled MAC layers for a ns3::WifiNetDevice |
►CNs2MobilityHelper | Helper class which can read ns-2 movement files and configure nodes mobility |
CObjectStore | Class to hold input objects internally |
CNs3NscStack | This object represents the underlying nsc stack, which is aggregated to a Node object, and which provides access to the sysctls of the nsc stack through attributes |
CNscInterfaceImpl | Nsc interface implementation class |
CNscStackStringAccessor | This object represent the underlying nsc stack attributes and provide a ns-3-like system to access them though sysctls |
CNscTcpL4Protocol | Nsc wrapper glue, to interface with the Ipv4 protocol underneath |
CNscTcpSocketFactoryImpl | Socket factory implementation for creating instances of NSC TCP |
CNscTcpSocketImpl | Socket logic for the NSC TCP sockets |
CNullMessageMpiInterface | Interface between ns-3 and MPI for the Null Message distributed simulation implementation |
CNullMessageSentBuffer | Non-blocking send buffers for Null Message implementation |
CNullMessageSimulatorImpl | Simulator implementation using MPI and a Null Message algorithm |
►CObject | A base class which provides memory management and object aggregation |
CAggregateIterator | Iterate over the Objects aggregated to an ns3::Object |
CAggregates | The list of Objects aggregated to this one |
CObjectBase | Anchor the ns-3 type and attribute system |
CObjectDeleter | Standard Object deleter, used by SimpleRefCount to delete an Object when the reference count drops to zero |
CObjectFactory | Instantiate subclasses of ns3::Object |
CObjectFactoryChecker | AttributeChecker implementation for ObjectFactoryValue |
CObjectFactoryValue | AttributeValue implementation for ObjectFactory |
CObjectMapChecker | AttributeChecker implementation for ObjectMapValue |
CObjectPtrContainerAccessor | AttributeAccessor implementation for ObjectPtrContainerValue |
CObjectPtrContainerChecker | AttributeChecker implementation for ObjectPtrContainerValue |
CObjectPtrContainerValue | Container for a set of ns3::Object pointers |
CObjectVectorChecker | AttributeChecker implementation for ObjectVectorValue |
COcbWifiMac | STAs communicate with each directly outside the context of a BSSIn OCB mac mode,synchronization, association, dis-association and authentication of normal wifi are not used for wireless access in vehicular environments |
COfdmDcdChannelEncodings | |
COfdmDlBurstProfile | |
COfdmDlMapIe | |
COfdmDownlinkFramePrefix | |
COfdmSendParams | |
COfdmUcdChannelEncodings | |
COfdmUlBurstProfile | |
COfdmUlMapIe | |
COhBuildingsPropagationLossModel | This model combines the OkumuraHata model with the BuildingsPropagationLossModel |
COkumuraHataPropagationLossModel | This class implements the Okumura Hata propagation loss model |
COlsrHelper | Helper class that adds OLSR routing to nodes |
►COmnetDataOutput | Outputs data in a format compatible with OMNeT library and framework |
COmnetOutputCallback | Class to generate OMNeT output |
COnoeWifiManager | Implementation of the rate control algorithm developed by Atsushi Onoe |
COnoeWifiRemoteStation | Hold per-remote-station state for ONOE Wifi manager |
COnOffApplication | Generate traffic to a single destination according to an OnOff pattern |
COnOffHelper | A helper to make it easier to instantiate an ns3::OnOffApplication on a set of nodes |
COpenFlowSwitchHelper | Add capability to switch multiple LAN segments (IEEE 802.1D bridging) |
COpenFlowSwitchNetDevice | A net device that switches multiple LAN segments via an OpenFlow-compatible flow table |
COptionField | Option field for an IPv6ExtensionHeader Enables adding options to an IPv6ExtensionHeader |
COrbisTopologyReader | Topology file reader (Orbis-format type) |
COrganizationIdentifier | Organization identifier is a public organizationally unique identifier assigned by the IEEE |
COrganizationIdentifierChecker | AttributeChecker implementation for OrganizationIdentifierValue |
COrganizationIdentifierValue | AttributeValue implementation for OrganizationIdentifier |
COriginatorBlockAckAgreement | Maintains the state and information about transmitted MPDUs with ack policy block ack for an originator station |
COriginatorRxStatus | A class to keep track of the packet originator status |
COutputStreamWrapper | A class encapsulating an output stream |
CPacket | Network packets |
CPacketBurst | This class implement a burst as a list of packets |
CPacketCounterCalculator | A stat for counting packets |
CPacketLossCounter | A class to count the number of lost packets |
►CPacketMetadata | Handle packet metadata about packet headers and trailers |
CData | Data structure |
CDataFreeList | Class to hold all the metadata |
CExtraItem | ExtraItem structure |
CItem | Structure describing a packet metadata item |
CItemIterator | Iterator class for metadata items |
CSmallItem | SmallItem structure |
CPacketProbe | This class is designed to probe an underlying ns3 TraceSource exporting a packet |
CPacketSink | Receive and consume traffic generated to an IP address and port |
CPacketSinkHelper | A helper to make it easier to instantiate an ns3::PacketSinkApplication on a set of nodes |
CPacketSizeMinMaxAvgTotalCalculator | A stat for collecting packet size statistics: min, max and average |
CPacketSocket | A PacketSocket is a link between an application and a net device |
CPacketSocketAddress | Address for a packet socket |
CPacketSocketClient | A simple client |
CPacketSocketFactory | This can be used as an interface in a node in order for the node to generate PacketSockets that can connect to net devices |
CPacketSocketHelper | Give ns3::PacketSocket powers to ns3::Node |
CPacketSocketServer | A server using PacketSocket |
CPacketSocketTag | This class implements a tag that carries the dest address of a packet and the packet type |
►CPacketTagIterator | Iterator over the set of packet tags in a packet |
CItem | Identifies a packet tag within a packet |
►CPacketTagList | List of the packet tags stored in a packet |
CTagData | Tree node for sharing serialized tags |
CPagingInfoListElement_s | See section 4.3.30 pagingInfoListElement |
CParabolicAntennaModel | Antenna model based on a parabolic approximation of the main lobe radiation pattern |
CParallelCommunicationInterface | Pure virtual base class for the interface between ns-3 and the parallel communication layer being used |
CParameterLogger | Insert , when streaming function arguments |
CParameters | |
CParetoRandomVariable | The Pareto distribution Random Number Generator (RNG) |
CParfWifiManager | PARF Rate control algorithm |
CParfWifiRemoteStation | Hold per-remote-station state for PARF Wifi manager |
CParseResult | Type to maintain line parsed and its values |
CPbbAddressBlock | An Address Block and its associated Address TLV Blocks |
CPbbAddressBlockIpv4 | Concrete IPv4 specific PbbAddressBlock |
CPbbAddressBlockIpv6 | Concrete IPv6 specific PbbAddressBlock |
CPbbAddressTlv | An Address TLV |
CPbbAddressTlvBlock | A block of Address TLVs (PbbAddressTlv) |
CPbbMessage | A message within a PbbPacket packet |
CPbbMessageIpv4 | Concrete IPv4 specific PbbMessage |
CPbbMessageIpv6 | Concrete IPv6 specific PbbMessage class |
CPbbPacket | Main PacketBB Packet object |
CPbbTlv | A packet or message TLV |
CPbbTlvBlock | A block of packet or message TLVs (PbbTlv) |
►CPcapFile | A class representing a pcap file |
CPcapFileHeader | Pcap file header |
CPcapRecordHeader | Pcap record header |
CPcapFileWrapper | A class that wraps a PcapFile as an ns3::Object and provides a higher-layer ns-3 interface to the low-level public methods of PcapFile |
CPcapHelper | Manage pcap files for device models |
CPcapHelperForDevice | Base class providing common user-level pcap operations for helpers representing net devices |
CPcapHelperForIpv4 | Base class providing common user-level pcap operations for helpers representing IPv4 protocols |
CPcapHelperForIpv6 | Base class providing common user-level pcap operations for helpers representing IPv6 protocols |
CPdcpTag | Tag to calculate the per-PDU delay from eNb PDCP to UE PDCP |
CPendingData | Class for managing I/O between applications and TCP |
CPfFfMacScheduler | Implements the SCHED SAP and CSCHED SAP for a Proportional Fair scheduler |
CPfSchedulerMemberCschedSapProvider | |
CPfSchedulerMemberSchedSapProvider | |
CpfsFlowPerf_t | |
CPhichListElement_s | See section 4.3.7 phichListElement |
CPhyListener | Listener for PHY events |
CPhyMacLowListener | Listener for PHY events |
CPhyReceptionStatParameters | |
CPhyRxStatsCalculator | Takes care of storing the information generated at PHY layer regarding reception |
CPhyStatsCalculator | Takes care of storing the information generated at PHY layer |
CPhyTransmissionStatParameters | |
CPhyTxStatsCalculator | Takes care of storing the information generated at PHY layer regarding transmission |
CPing6 | A ping6 application |
CPing6Helper | Ping6 application helper |
CPlanetLabFdNetDeviceHelper | Build a set of FdNetDevice objects attached to a virtual TAP network interface |
CPointerChecker | AttributeChecker implementation for PointerValue |
CPointerValue | Hold objects of type Ptr<T> |
►CPointToPointChannel | Simple Point To Point Channel |
CLink | Wire model for the PointToPointChannel |
CPointToPointDumbbellHelper | A helper to make it easier to create a dumbbell topology with p2p links |
CPointToPointEpcHelper | Create an EPC network with PointToPoint links |
CPointToPointGridHelper | A helper to make it easier to create a grid topology with p2p links |
CPointToPointHelper | Build a set of PointToPointNetDevice objects |
CPointToPointNetDevice | A Device for a Point to Point Network Link |
CPointToPointRemoteChannel | A Remote Point-To-Point Channel |
CPointToPointStarHelper | A helper to make it easier to create a star topology with PointToPoint links |
►CPortRangeTlvValue | |
CPortRange | |
CPositionAllocator | Allocate a set of positions |
CPppHeader | Packet header for PPP |
CPrintList | Handler for print-list token in NS_LOG to print the list of log components |
CPriorityUlJob | |
CProbe | Base class for probes |
►CPropagationCache | Constructs a cache of objects, where each object is responsible for a single propagation path loss calculations |
CPropagationPathIdentifier | Each path is identified by |
CPropagationDelayModel | Calculate a propagation delay |
CPropagationLossModel | Models the propagation loss through a transmission medium |
CProtocolTlvValue | |
CPssFfMacScheduler | Implements the SCHED SAP and CSCHED SAP for a Priority Set scheduler |
CpssFlowPerf_t | Flow information |
CPssSchedulerMemberCschedSapProvider | |
CPssSchedulerMemberSchedSapProvider | |
►CPtr | Smart pointer class similar to boost::intrusive_ptr |
CTester | Helper to test for null pointer |
►CPyViz | Helper class to be used by the visualizer |
CLastPacketsSample | |
CNetDeviceStatistics | |
CNodeStatistics | |
CPacketCaptureOptions | |
CPacketDropSample | |
CPacketSample | |
CRxPacketSample | |
CTransmissionSample | |
CTransmissionSampleKey | |
CTransmissionSampleValue | |
CTxPacketSample | |
CTxRecordValue | |
CPyVizPacketTag | |
Cqos_rb_and_CQI_assigned_to_lc | |
CQosBlockedDestinations | Keep track of destination address - TID pairs that are waiting for a block ACK response |
CQosTag | The aim of the QosTag is to provide means for an Application to specify the TID which will be used by a QoS-aware WifiMac for a given traffic flow |
CQosWaveMacHelper | |
CQosWifiMacHelper | Create QoS-enabled MAC layers for a ns3::WifiNetDevice |
CQueue | Abstract base class for packet Queues |
CRachListElement_s | See section 4.3.6 rachListElement |
CRachPreambleLteControlMessage | Abstract model for the Random Access Preamble |
CRadioBearerStatsCalculator | This class is an ns-3 trace sink that performs the calculation of PDU statistics for uplink and downlink |
►CRadioBearerStatsConnector | This class is very useful when user needs to collect statistics from PDCD and RLC |
CCellIdRnti | Struct used as key in m_ueManagerPathByCellIdRnti map |
►CRadioEnvironmentMapHelper | Generates a 2D map of the SINR from the strongest transmitter in the downlink of an LTE FDD system |
CRemPoint | A complete Radio Environment Map is composed of many of this structure |
CRadiotapHeader | Radiotap header implementation |
CRadvd | Router advertisement daemon |
CRadvdHelper | Radvd application helper |
CRadvdInterface | Radvd interface configuration |
CRadvdPrefix | Router prefix for radvd application |
CRandomBoxPositionAllocator | Allocate random positions within a 3D box according to a set of three random variables |
CRandomBuildingPositionAllocator | Allocate each position by randomly chosing a building from the list of all buildings, and then randomly chosing a position inside the building |
CRandomDirection2dMobilityModel | Random direction mobility model |
CRandomDiscPositionAllocator | Allocate random positions within a disc according to a given distribution for the polar coordinates of each node with respect to the provided center of the disc |
CRandomPropagationDelayModel | Propagation delay is random |
CRandomPropagationLossModel | The propagation loss follows a random distribution |
CRandomRectanglePositionAllocator | Allocate random positions within a rectangle according to a pair of random variables |
►CRandomRoomPositionAllocator | Allocate each position by randomly chosing a room from the list of all buildings, and then randomly chosing a position inside the room |
CRoomInfo | |
CRandomStream | A simple wrapper around RngStream to make testing of the code easier |
CRandomVariableChecker | AttributeChecker implementation for RandomVariableValue |
CRandomVariableStream | The basic uniform Random Number Generator (RNG) |
CRandomVariableStreamHelper | Helper class for static methods involving RandomVariableStream |
CRandomVariableValue | AttributeValue implementation for RandomVariable |
CRandomWalk2dMobilityModel | 2D random walk mobility model |
CRandomWaypointMobilityModel | Random waypoint mobility model |
CRangePropagationLossModel | The propagation loss depends only on the distance (range) between transmitter and receiver |
►CRarLteControlMessage | Abstract model for the MAC Random Access Response message |
CRar | MAC RAR and the corresponding RAPID subheader |
CRateErrorModel | Determine which packets are errored corresponding to an underlying distribution, rate, and unit |
CRateInfo | A struct to contain all information related to a data rate |
CRawTextConfigLoad | |
CRawTextConfigSave | |
CRealProtocolRlcSapUser | |
CRealRandomStream | |
CRealtimeSimulatorImpl | Realtime version of SimulatorImpl |
CReceiveListErrorModel | Provide a list of Packets to corrupt |
CRectangle | 2d rectangle |
CRectangleChecker | AttributeChecker implementation for RectangleValue |
CRectangleValue | AttributeValue implementation for Rectangle |
►CRedQueue | A RED packet queue |
CStats | Stats |
CRefCountBase | A deprecated way to get reference-counting powers |
CRegularWifiMac | Base class for all MAC-level wifi objects |
CRemoteChannelBundle | Collection of NS3 channels between local and remote nodes |
CRemoteChannelBundleManager | |
CRemSpectrumPhy | This minimal SpectrumPhy implemetation calculates the SINR with respect to the strongest signal for a given point |
CReservation | Stores reservation info for use in scheduling data channel by reservation channel MAC |
CResolver | Abstract class to parse Config paths into object references |
CRipNg | RIPng Routing Protocol, defined in RFC 2080 |
CRipNgHeader | RipNgHeader - see RFC 2080 |
CRipNgHelper | Helper class that adds RIPng routing to nodes |
CRipNgRoutingTableEntry | RipNg Routing Table Entry |
CRipNgRte | RipNg Routing Table Entry (RTE) - see RFC 2080 |
CRlcAmStatusPduTestCase | |
CRlcPduListElement_s | See section 4.3.9 rlcPDU_ListElement |
CRlcTag | Tag to calculate the per-PDU delay from eNb RLC to UE RLC |
CRngReq | Introspection did not find any typical Config paths |
CRngRsp | Introspection did not find any typical Config paths |
CRngSeedManager | Manage the seed number and run number of the underlying random number generator, and automatic assignment of stream numbers |
CRngStream | Combined Multiple-Recursive Generator MRG32k3a |
CRocketfuelTopologyReader | Topology file reader (Rocketfuel-format type) |
►CRraaWifiManager | Robust Rate Adaptation AlgorithmThis is an implementation of RRAA as described in "Robust rate adaptation for 802.11 wireless networks" by "Starsky H. Y. Wong", "Hao Yang", "Songwu Lu", and, "Vaduvur Bharghavan" published in Mobicom 06 |
CThresholdsItem | |
CRraaWifiRemoteStation | Hold per-remote-station state for RRAA Wifi manager |
CRrcAsn1Header | This class extends Asn1Header functions, adding serialization/deserialization of some Information elements defined in 3GPP TS 36.331 |
CRrcConnectionReconfigurationCompleteHeader | This class manages the serialization/deserialization of RrcConnectionSetupComplete IE |
CRrcConnectionReconfigurationHeader | This class manages the serialization/deserialization of RrcConnectionReconfiguration IE |
CRrcConnectionReestablishmentCompleteHeader | This class manages the serialization/deserialization of RrcConnectionReestablishmentComplete IE |
CRrcConnectionReestablishmentHeader | This class manages the serialization/deserialization of RrcConnectionReestablishment IE |
CRrcConnectionReestablishmentRejectHeader | This class manages the serialization/deserialization of RrcConnectionReestablishmentReject IE |
CRrcConnectionReestablishmentRequestHeader | This class manages the serialization/deserialization of RRCConnectionReestablishmentRequest IE |
CRrcConnectionRejectHeader | This class manages the serialization/deserialization of RrcConnectionReject IE |
CRrcConnectionReleaseHeader | This class manages the serialization/deserialization of RrcConnectionRelease IE |
CRrcConnectionRequestHeader | This class manages the serialization/deserialization of RrcConnectionRequest IE |
CRrcConnectionSetupCompleteHeader | This class manages the serialization/deserialization of RrcConnectionSetupComplete IE |
CRrcConnectionSetupHeader | This class manages the serialization/deserialization of RrcConnectionSetup IE |
CRrcDlCcchMessage | This class only serves to discriminate which message type has been received in downlink (eNb to ue) for channel CCCH |
CRrcDlDcchMessage | This class only serves to discriminate which message type has been received in downlink (eNb to ue) for channel DCCH |
CRrcUlCcchMessage | This class only serves to discriminate which message type has been received in uplink (ue to eNb) for channel CCCH |
CRrcUlDcchMessage | This class only serves to discriminate which message type has been received in uplink (ue to eNb) for channel DCCH |
CRrFfMacScheduler | Implements the SCHED SAP and CSCHED SAP for a Round Robin scheduler |
CRrSchedulerMemberCschedSapProvider | |
CRrSchedulerMemberSchedSapProvider | |
CRttEstimator | Base class for all RTT Estimators |
CRttHistory | Helper class to store RTT measurements |
CRttMeanDeviation | The "Mean--Deviation" RTT estimator, as discussed by Van Jacobson |
CRvBatteryModel | Rakhmatov Vrudhula non-linear battery model |
CRvBatteryModelHelper | Creates a RvBatteryModel object |
CRxSpectrumModelInfo | |
CSameRoomPositionAllocator | Walks a given NodeContainer sequentially, and for each node allocate a new position randomly in the same room of that node |
CSbMeasResult_s | See section 4.3.25 sbMeasResult |
►CScheduler | Maintain the event list |
CEvent | Scheduler event |
CEventKey | Structure for sorting and comparing Events |
CSchInfo | |
CSendParams | Defines the parameters with which Send() function of a particular PHY is called |
CSentBuffer | Tracks non-blocking sends |
CSeqTsHeader | Introspection did not find any typical Config paths |
CSequenceNumber | Generic "sequence number" class |
CSequenceNumber10 | |
CSequentialRandomVariable | The Random Number Generator (RNG) that returns a pattern of sequential values |
CServiceFlow | This class implements service flows as described by the IEEE-802.16 standard |
CServiceFlowManager | The same service flow manager class serves both for BS and SS though some functions are exclusive to only one of them |
CServiceFlowRecord | This class implements a structure to manage some parameters and statistics related to a service flow |
CSfVectorTlvValue | |
CShannonSpectrumErrorModel | This class implements the error model described in this paper: N |
CSib1LteControlMessage | Abstract model for broadcasting the System Information Block Type 1 (SIB1) within the control channel (BCCH) |
CSiConfiguration_s | See section 4.3.21 siConfiguration |
CsignalNoiseDbm | |
CSiMessageListElement_s | See section 4.3.22 siMessageListElement |
CSimpleChannel | A simple channel, for simple things and testing |
CSimpleDeviceEnergyModel | A simple device energy model where current drain can be set by the user |
CSimpleNetDevice | This device assumes 48-bit mac addressing; there is also the possibility to add an ErrorModel if you want to force losses on the device |
CSimpleNetDeviceHelper | Build a set of SimpleNetDevice objects |
CsimpleOfdmSendParam | |
CSimpleOfdmWimaxChannel | |
CSimpleOfdmWimaxPhy | |
CSimpleRefCount | A template-based reference counting class |
CSimpleTag | SimpleNetDevice tag to store source, destination and protocol of each packet |
CSimulationSingleton | This singleton class template ensures that the type for which we want a singleton has a lifetime bounded by the simulation run lifetime |
CSimulator | Control the scheduling of simulation events |
CSimulatorImpl | The SimulatorImpl base class |
CSingleModelSpectrumChannel | SpectrumChannel implementation which handles a single spectrum model |
CSingleton | A template singleton |
CSixLowPanDispatch | Dispatch header helper |
CSixLowPanFrag1 | 6LoWPAN FRAG1 header - see RFC 4944 |
CSixLowPanFragN | 6LoWPAN FRAGN header - see RFC 4944 |
CSixLowPanHc1 | 6LoWPAN HC1 header - see RFC 4944 |
CSixLowPanHelper | Setup a sixlowpan stack to be used as a shim between IPv6 and a generic NetDevice |
CSixLowPanIphc | LOWPAN_IPHC base Encoding - see RFC 6282 |
CSixLowPanIpv6 | 6LoWPAN IPv6 uncompressed header - see RFC 4944 |
►CSixLowPanNetDevice | Shim performing 6LoWPAN compression, decompression and fragmentation |
CFragments | A Set of Fragment |
CSixLowPanNhcExtension | LOWPAN_NHC Extension Header Encoding - see RFC 6282 |
CSixLowPanUdpNhcExtension | UDP LOWPAN_NHC Extension Header Encoding - see RFC 6282 |
CSnrTag | Introspection did not find any typical Config paths |
CSNRToBlockErrorRateManager | This class handles the SNR to BlcER traces |
CSNRToBlockErrorRateRecord | This class represents a record (handled by SnrToBlockErrorRate manager) that keeps a mapping between an SNR value and its corresponding (1) Bit Error Rate, (2) Block Error Rate, (3) Standard deviation, (4 and 5) confidence interval |
CSocket | A low-level Socket API based loosely on the BSD Socket API |
CSocketAddressTag | This class implements a tag that carries an address of a packet across the socket interface |
CSocketFactory | Object to create transport layer instances that provide a socket API to applications |
CSocketIpTosTag | Indicates whether the socket has IP_TOS set |
CSocketIpTtlTag | This class implements a tag that carries the socket-specific TTL of a packet to the IP layer |
CSocketIpv6HopLimitTag | This class implements a tag that carries the socket-specific HOPLIMIT of a packet to the IPv6 layer |
CSocketIpv6TclassTag | Indicates whether the socket has IPV6_TCLASS set |
CSocketSetDontFragmentTag | Indicates whether packets should be sent out with the DF (Don't Fragment) flag set |
CSocketWriter | |
CSortProcess | |
CSortProcessPtr | |
CSpectrumAnalyzer | Simple SpectrumPhy implemetation that averages the spectrum power density of incoming transmissions to produce a spectrogram |
CSpectrumAnalyzerHelper | |
CSpectrumChannel | Defines the interface for spectrum-aware channel implementations |
CSpectrumChannelHelper | |
CSpectrumConverter | Class which implements a converter between SpectrumValue which are defined over different SpectrumModel |
CSpectrumErrorModel | Introspection did not find any typical Config paths |
CSpectrumInterference | This class implements a gaussian interference model, i.e., all incoming signals are added to the total interference |
CSpectrumModel | Set of frequency values implementing the domain of the functions in the Function Space defined by SpectrumValue |
CSpectrumPhy | Abstract base class for Spectrum-aware PHY layers |
CSpectrumPhyHelper | Create and configure several SpectrumPhy instances and connect them to a channel |
CSpectrumPropagationLossModel | Spectrum-aware propagation loss model |
CSpectrumSignalParameters | This struct provides the generic signal representation to be used by all wireless technologies |
CSpectrumValue | Set of values corresponding to a given SpectrumModel |
CSPFVertex | Vertex used in shortest path first (SPF) computations |
CSpsConfig_s | See section 4.3.17 spsConfig |
►CSqliteDataOutput | Outputs data in a format compatible with SQLite |
CSqliteOutputCallback | Class to generate OMNeT output |
CSrConfig_s | See section 4.3.18 srConfig |
CSrListElement_s | See section 4.3.13 srListElement |
CSrsCqiRntiVsp | Define the RNTI that has generated the |
CSsid | The IEEE 802.11 SSID Information Element |
CSsidChecker | AttributeChecker implementation for SsidValue |
CSsidValue | AttributeValue implementation for Ssid |
CSSLinkManager | This class implements the link manager of subscriber station net device |
CSSManager | This class manages a list of SSrecord |
CSSRecord | This class is used by the base station to store some information related to subscriber station in the cell |
CSSScheduler | |
CSsServiceFlowManager | |
Cstatic_SpectrumModel300Khz300GhzLog_initializer | |
Cstatic_SpectrumModelIsm2400MhzRes1Mhz_initializer | |
CStatisticalSummary | Abstract class for calculating statistical data |
CStatusCode | Status code for association response |
CStaWifiMac | The Wifi MAC high model for a non-AP STA in a BSS |
CSteadyStateRandomWaypointMobilityModel | Steady-state random waypoint mobility model |
CStringChecker | AttributeChecker implementation for StringValue |
CStringValue | Hold variables of type string |
CSubscriberStationNetDevice | |
CSupportedRates | The Supported Rates Information ElementThis class knows how to serialise and deserialise the Supported Rates Element that holds the first 8 (non-HT) supported rates |
CSynchronizer | Base class used for synchronizing the simulation events to some real time "wall clock." |
CSystemCondition | A class which provides a relatively platform-independent conditional-wait thread synchronization primitive |
CSystemConditionPrivate | Implementation of SystemCondition for Unix-like systems |
CSystemMutex | A class which provides a relatively platform-independent Mutual Exclusion thread synchronization primitive |
CSystemMutexPrivate | System-dependent implementation of SystemMutex |
CSystemThread | A class which provides a relatively platform-independent thread primitive |
CSystemWallClockMs | Measure elapsed wall clock time in milliseconds |
CSystemWallClockMsPrivate | System-dependent implementation for SystemWallClockMs |
CTag | Tag a set of bytes in a packet |
CTagBuffer | Read and write tag data |
CTap | Holds PDP Tap information (amplitude and delay) |
CTapBridge | A bridge to make it appear that a real host process is connected to an ns-3 net device |
CTapBridgeFdReader | Class to perform the actual reading from a socket |
CTapBridgeHelper | Build TapBridge to allow ns-3 simulations to interact with Linux tap devices and processes on the Linux host |
CTapFdNetDeviceHelper | Build a set of FdNetDevice objects attached to a virtual TAP network interface |
CTbId_t | |
CtbInfo_t | |
CTbStats_t | |
CTcpCongestionOps | Congestion control abstract class |
CTcpFastRetrTest | Test the fast retransmission |
CTcpFastRetrTestSuite | |
CTcpFlagErrorModel | Error model which drop packets with specified TCP flags |
CTcpGeneralErrorModel | A general (TCP-aware) error model |
CTcpGeneralTest | General infrastructure for TCP testing |
CTcpHeader | Header for the Transmission Control Protocol |
CTcpHeaderFlagsToString | |
CTcpHeaderGetSetTestCase | |
CTcpHeaderTestSuite | |
CTcpHeaderWithRFC793OptionTestCase | |
CTcpHighSpeed | An implementation of TCP HighSpeed |
CTcpHighSpeedDecrementTest | Testing the congestion avoidance increment on TcpHighSpeed |
CTcpHighSpeedIncrementTest | Testing the congestion avoidance increment on TcpHighSpeed |
CTcpHighSpeedTestSuite | |
CTcpHybla | Implementation of the TCP Hybla algorithm |
CTcpHyblaIncrementTest | Testing the congestion avoidance increment on TcpHybla |
CTcpHyblaTestSuite | |
CTcpL4Protocol | Tcp socket creation and multiplexing/demultiplexing |
CTcpNewReno | The NewReno implementation |
CTcpNewRenoCongAvoidNormalTest | Test the behavior of RFC congestion avoidance |
CTcpOption | Base class for all kinds of TCP options |
CTcpOptionEnd | Defines the TCP option of kind 0 (end of option list) as in RFC 793 |
CTcpOptionMSS | Defines the TCP option of kind 2 (maximum segment size) as in RFC 793 |
CTcpOptionNOP | Defines the TCP option of kind 1 (no operation) as in RFC 793 |
CTcpOptionTestSuite | |
CTcpOptionTS | Defines the TCP option of kind 8 (timestamp option) as in RFC 1323 |
CTcpOptionTSTestCase | |
CTcpOptionUnknown | An unknown TCP option |
CTcpOptionWinScale | Defines the TCP option of kind 3 (window scale option) as in RFC 1323 |
CTcpOptionWSTestCase | |
CTcpRenoCongAvoidTestSuite | |
CTcpRtoTest | Testing the moments after an RTO expiration |
CTcpRtoTestSuite | |
CTcpRxBuffer | Class for the reordering buffer that keeps the data from lower layer, i.e |
CTcpSeqErrorModel | An error model TCP aware: it drops the sequence number declared |
CTcpSlowStartAttackerTest | A slow start test using a socket which sends smaller ACKs |
CTcpSlowStartNormalTest | Test the normal behavior for slow start |
CTcpSlowStartTestSuite | |
CTcpSocket | (abstract) base class of all TcpSockets |
CTcpSocketBase | A base class for implementation of a stream socket using TCP |
CTcpSocketFactory | API to create TCP socket instances |
CTcpSocketFactoryImpl | Socket factory implementation for native ns-3 TCP |
CTcpSocketMsgBase | Class for inserting callbacks special points of the flow of TCP sockets |
CTcpSocketSmallAcks | A TCP socket which sends ACKs smaller than the segment received |
CTcpSocketState | Data structure that records the congestion state of a connection |
CTcpTimeRtoTest | Testing the timing of RTO |
CTcpTimestampTestSuite | |
CTcpTxBuffer | Class for keeping the data sent by the application to the TCP socket, i.e |
CTcpWestwood | An implementation of a stream socket using TCP |
CTcpWScalingTestSuite | |
CTcpZeroWindowTest | |
CTcpZeroWindowTestSuite | |
CTdBetFfMacScheduler | Implements the SCHED SAP and CSCHED SAP for a Time Domain Blind Equal Throughput scheduler |
CTdBetSchedulerMemberCschedSapProvider | |
CTdBetSchedulerMemberSchedSapProvider | |
CtdbetsFlowPerf_t | |
CTdMtFfMacScheduler | Implements the SCHED SAP and CSCHED SAP for a Time Domain Maximize Throughput scheduler |
CTdMtSchedulerMemberCschedSapProvider | |
CTdMtSchedulerMemberSchedSapProvider | |
CTdTbfqFfMacScheduler | Implements the SCHED SAP and CSCHED SAP for a Time Domain Token Bank Fair Queue scheduler |
CTdTbfqSchedulerMemberCschedSapProvider | |
CTdTbfqSchedulerMemberSchedSapProvider | |
CtdtbfqsFlowPerf_t | Flow information |
►CTestCase | Encapsulates test code |
CResult | Container for results from a TestCase |
CTestCaseFailure | Container for details of a test failure |
CTestRandomStream | |
CTestRunner | A runner to execute tests |
CTestRunnerImpl | Container for all tests |
CTestSuite | A suite of tests to run |
CTestUtils | |
CTestVectors | A simple way to store test vectors (for stimulus or from responses) |
CThreeBoundFunctorCallbackImpl | CallbackImpl for functors with first three arguments bound at construction |
CThreeLogDistancePropagationLossModel | A log distance path loss propagation model with three distance fields |
►CTime | Simulation virtual time values and global simulation resolution |
CInformation | How to convert between other units and the current unit |
CResolution | Current time unit, and conversion info |
CTimeChecker | AttributeChecker implementation for TimeValue |
CTimeMinMaxAvgTotalCalculator | Unfortunately, templating the base MinMaxAvgTotalCalculator to operate over Time values isn't straightforward |
CTimeProbe | This class is designed to probe an underlying ns3 TraceSource exporting an ns3::Time |
CTimer | A simple Timer class |
CTimerImpl | The timer implementation underlying Timer and Watchdog |
CTimerImplFive | TimerImpl specialization class for varying numbers of arguments |
CTimerImplFour | TimerImpl specialization class for varying numbers of arguments |
CTimerImplMemberTraits | Helper for the MakeTimerImpl functions which take a class method |
CTimerImplMemberTraits< T * > | Helper for the MakeTimerImpl functions which take a class method |
CTimerImplOne | TimerImpl specialization class for varying numbers of arguments |
CTimerImplSix | TimerImpl specialization class for varying numbers of arguments |
CTimerImplThree | TimerImpl specialization class for varying numbers of arguments |
CTimerImplTwo | TimerImpl specialization class for varying numbers of arguments |
CTimerTraits | Type and reference traits for TimerImpl arguments |
CTimeSeriesAdaptor | Takes probed values of different types and outputs the current time plus the value with both converted to doubles |
CTimestampTestCase | |
CTimestampValueTestCase | |
CTimeValue | AttributeValue implementation for Time |
CTimeWithUnit | A Time with attached unit, to facilitate output in that unit |
CTlv | This class implements the Type-Len-Value structure channel encodings as described by "IEEE Standard for
Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems" |
CTlvValue | The value field of a tlv can take different values (uint8_t, uint16, vector...) |
►CTopologyReader | Interface for input file readers management |
CLink | Inner class holding the details about a link between two nodes |
CTopologyReaderHelper | Helper class which makes it easier to configure and use a generic TopologyReader |
CTosTlvValue | |
CTracedCallback | Forward calls to a chain of Callback |
CTracedValue | Trace classes with value semantics |
CTraceFadingLossModel | Fading loss model based on precalculated fading traces |
CTraceSourceAccessor | Control access to objects' trace sources |
CTrailer | Protocol trailer serialization and deserialization |
CTransmissionModesLayers | |
CTriangularRandomVariable | The triangular distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically |
CTtaFfMacScheduler | Implements the SCHED SAP and CSCHED SAP for a Throughput to Average scheduler |
CTtaSchedulerMemberCschedSapProvider | |
CTtaSchedulerMemberSchedSapProvider | |
CTvSpectrumModelId | |
CTvSpectrumTransmitter | SpectrumPhy implementation that creates a customizable TV transmitter which transmits a PSD spectrum specified by user-set attributes |
CTvSpectrumTransmitterHelper | Helper class which uses TvSpectrumTransmitter class to create customizable TV transmitter(s) that transmit PSD spectrum specified by user-set attributes |
CTwoBoundFunctorCallbackImpl | CallbackImpl for functors with first two arguments bound at construction |
CTwoRayGroundPropagationLossModel | Two-Ray Ground propagation loss model ported from NS2 |
CTxInfo | |
CTxProfile | |
CTxSpectrumModelInfo | |
►CTypeId | Unique identifier for an interface |
CAttributeInformation | Attribute implementation |
CTraceSourceInformation | TraceSource implementation |
CTypeIdChecker | AttributeChecker implementation for TypeIdValue |
CTypeIdValue | AttributeValue implementation for TypeId |
CU16TlvValue | |
CU32TlvValue | |
CU8TlvValue | |
CUanAddress | A class used for addressing UAN MAC's |
CUanChannel | Channel class used by UAN devices |
CUanHeaderCommon | Common packet header fields |
CUanHeaderRcAck | Header used for ACK packets by protocol UanMacRc |
CUanHeaderRcCts | CTS header |
CUanHeaderRcCtsGlobal | Cycle broadcast information |
CUanHeaderRcData | Extra data header information |
CUanHeaderRcRts | RTS header |
CUanHelper | UAN configuration helper |
CUanMac | Virtual base class for all UAN MAC protocols |
CUanMacAloha | ALOHA MAC Protocol, the simplest MAC protocol for wireless networks |
CUanMacCw | CW-MAC protocol, similar in idea to the 802.11 DCF with constant backoff window |
CUanMacRc | Non-gateway node MAC for reservation channel MAC protocol |
►CUanMacRcGw | Gateway side of RC-MAC |
CAckData | Packet ACK data |
CRequest | Reservation request |
CUanModesList | Container for UanTxModes |
CUanModesListChecker | AttributeChecker implementation for UanModesListValue |
CUanModesListValue | AttributeValue implementation for UanModesList |
CUanNetDevice | Net device for UAN models |
CUanNoiseModel | UAN Noise Model base class |
CUanNoiseModelDefault | Standard ambient acoustic noise model |
CUanPacketArrival | Class consisting of packet arrival information (Time, RxPower, mode, PDP) |
CUanPdp | The power delay profile returned by propagation models |
CUanPhy | Base class for UAN Phy models |
CUanPhyCalcSinr | Class used for calculating SINR of packet in UanPhy |
CUanPhyCalcSinrDefault | Default SINR calculator for UanPhyGen |
CUanPhyCalcSinrDual | Default SINR model for UanPhyDual |
CUanPhyCalcSinrFhFsk | WHOI Micromodem like FH-FSK model |
CUanPhyDual | Two channel Phy |
CUanPhyGen | Generic PHY model |
CUanPhyListener | Interface for PHY event listener |
CUanPhyPer | Calculate packet error probability, based on received SINR and modulation (mode) |
CUanPhyPerGenDefault | Default Packet Error Rate calculator for UanPhyGen |
CUanPhyPerUmodem | Packet error rate calculation assuming WHOI Micromodem-like PHY |
CUanPropModel | Base class for implemented underwater propagation models |
CUanPropModelIdeal | Ideal propagation model (no pathloss, impulse PDP) |
CUanPropModelThorp | Uses Thorp's approximation to compute pathloss |
CUanTransducer | Virtual base for Transducer objects |
CUanTransducerHd | Half duplex implementation of transducer object |
CUanTxMode | Abstraction of packet modulation information |
►CUanTxModeFactory | Global database of UanTxMode objects, retrievable by id or name |
CUanTxModeItem | Container for the UanTxMode properties |
CUcd | Introspection did not find any typical Config paths |
CUcdChannelEncodings | This class implements the UCD channel encodings as described by "IEEE Standard for
Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems" 11.3.1 UCD channel encodings, page 651 |
CUdpClient | A Udp client |
CUdpClientHelper | Create a client application which sends UDP packets carrying a 32bit sequence number and a 64 bit time stamp |
CUdpEchoClient | A Udp Echo client |
CUdpEchoClientHelper | Create an application which sends a UDP packet and waits for an echo of this packet |
CUdpEchoServer | A Udp Echo server |
CUdpEchoServerHelper | Create a server application which waits for input UDP packets and sends them back to the original sender |
CUdpHeader | Packet header for UDP packets |
CUdpL4Protocol | Implementation of the UDP protocol |
CUdpServer | A UDP server, receives UDP packets from a remote host |
CUdpServerHelper | Create a server application which waits for input UDP packets and uses the information carried into their payload to compute delay and to determine if some packets are lost |
CUdpSocket | (abstract) base class of all UdpSockets |
CUdpSocketFactory | API to create UDP socket instances |
CUdpSocketFactoryImpl | Object to create UDP socket instances |
CUdpSocketImpl | A sockets interface to UDP |
►CUdpTraceClient | Default trace to send |
CTraceEntry | Entry to send |
CUdpTraceClientHelper | Create UdpTraceClient application which sends UDP packets based on a trace file of an MPEG4 stream |
CUeCapabilities_s | See section 4.3.20 ueCapabilities |
CUeManager | Manages all the radio bearer information possessed by the ENB RRC for a single UE |
CUeMemberLteMacSapProvider | |
CUeMemberLteUeCmacSapProvider | |
CUeMemberLteUeCmacSapUser | |
CUeMemberLteUePhySapProvider | |
CUeMemberLteUePhySapUser | |
CUeSelected_s | See section 4.3.26 ueSelected |
CUinteger16Probe | This class is designed to probe an underlying ns3 TraceSource exporting an uint16_t |
CUinteger32Probe | This class is designed to probe an underlying ns3 TraceSource exporting an uint32_t |
CUinteger8Probe | This class is designed to probe an underlying ns3 TraceSource exporting an uint8_t |
CUintegerChecker | AttributeChecker implementation for UintegerValue |
CUintegerValue | Hold an unsigned integer type |
CUlCqi_s | See section 4.3.29 ulCQI |
CUlDciListElement_s | See section 4.3.2 ulDciListElement |
CUlDciLteControlMessage | The Uplink Data Control Indicator messages defines the RB allocation for the users in the uplink |
CUlGrant_s | Substitutive structure for specifying BuildRarListElement_s::m_grant field |
CUlInfoListElement_s | See section 4.3.12 ulInfoListElement |
CUlJob | This class implements a structure to compute the priority of service flows |
CUlMap | Introspection did not find any typical Config paths |
CUniformDiscPositionAllocator | Allocate the positions uniformely (with constant density) randomly within a disc |
CUniformRandomVariable | The uniform distribution Random Number Generator (RNG) |
CUplinkLteGlobalPathlossDatabase | Store the last pathloss value for each TX-RX pair for uplink |
CUplinkScheduler | Virtual class for uplink scheduler |
CUplinkSchedulerMBQoS | This class implements a Migration-based Quality of Service uplink scheduler(MBQoS) |
CUplinkSchedulerRtps | This class implements a simple uplink scheduler for rtPS flows |
CUplinkSchedulerSimple | |
CV4Ping | Application which sends one ICMP ECHO request, waits for a REPLYs and reports the calculated RTT |
CV4PingHelper | Create a IPv5 ping application and associate it to a node |
CValueClassTestChecker | AttributeChecker implementation for ValueClassTestValue |
CValueClassTestValue | AttributeValue implementation for ValueClassTest |
CVector2D | 2d vector |
CVector2DChecker | AttributeChecker implementation for Vector2DValue |
CVector2DValue | AttributeValue implementation for Vector2D |
CVector3D | 3d vector |
CVector3DChecker | AttributeChecker implementation for Vector3DValue |
CVector3DValue | AttributeValue implementation for Vector3D |
CVectorTlvValue | This class is used to implement a vector of values in one tlv value field |
CVendorSpecificActionHeader | See IEEE 802.11-2007 chapter 7.3.1.11 and 7.4.5 also IEEE 802.11p-2010 chapter 7.4.5 Although WifiActionHeader has been defined in wifi mgt-header.h/.cc, it is not a good way to inherit from it or add vendor specific action support |
CVendorSpecificContentManager | |
CVendorSpecificListElement_s | See section 4.3.3 vendorSpecifiListElement |
CVendorSpecificValue | Base class for storing the values of vendor specific parameters |
CVhtCapabilities | The IEEE 802.11ac VHT Capabilities |
CVhtCapabilitiesChecker | |
CVhtCapabilitiesValue | |
CVhtWifiMacHelper | Create VHT-enabled MAC layers for a ns3::WifiNetDevice |
CVirtualNetDevice | A virtual device, similar to Linux TUN/TAP interfaces |
CVisualSimulatorImpl | A replacement simulator that starts the visualizer |
CVsaInfo | |
►CVsaManager | Refer to 1609.4-2010 chapter 6.4 Vendor Specific Action (VSA) frames transmission |
CVsaWork | |
CWallClockSynchronizer | Class used for synchronizing the simulation events to a real-time "wall clock" using Posix clock functions |
CWatchdog | A very simple watchdog operating in virtual time |
CWaveBsmHelper | Manages IEEE 1609 WAVE (Wireless Access in Vehicular Environments) Basic Safety Messages (BSMs) and uses the WaveBsmStats class to manage statistics about BSMs transmitted and received The BSM is a ~200-byte packet that is generally broadcast from every vehicle at a nominal rate of 10 Hz |
CWaveBsmStats | Implements a stats collector for IEEE 1609 WAVE (Wireless Access in Vehicular Environments) Basic Safety Messages (BSMs) |
CWaveformGenerator | Simple SpectrumPhy implementation that sends customizable waveform |
CWaveformGeneratorHelper | |
CWaveHelper | Helps to create WaveNetDevice objects |
CWaveMacLow | This class is the subclass of MacLow to provide support for MAC extension (1) allows higher layer control data rate and tx power level |
CWaveNetDevice | This class holds together multiple, ns3::WifiPhy, and ns3::OcbWifiMac (including ns3::WifiRemoteStationManager) |
CWaypoint | (time, location) pair |
CWaypointChecker | AttributeChecker implementation for WaypointValue |
CWaypointMobilityModel | Waypoint-based mobility model |
CWaypointValue | AttributeValue implementation for Waypoint |
CWeibullRandomVariable | The Weibull distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically |
CWifi80211pHelper | Helps to create wifi 802.11p objects of WifiNetDevice class |
►CWifiActionHeader | See IEEE 802.11 chapter 7.3.1.11 Header format: | category: 1 | action value: 1 | |
CActionValue | Typedef for union of different ActionValues |
CWifiChannel | Wifi Channel interface specificationThis class works in tandem with the ns3::WifiPhy class |
CWifiHelper | Helps to create WifiNetDevice objects |
CWifiInformationElement | Information element, as defined in 802.11-2007 standardThe IEEE 802.11 standard includes the notion of Information Elements, which are encodings of management information to be communicated between STAs in the payload of various frames of type Management |
CWifiInformationElementVector | Information element vectorImplements a vector of WifiInformationElements |
CWifiMac | Base class for all MAC-level wifi objects |
CWifiMacHeader | Implements the IEEE 802.11 MAC header |
CWifiMacHelper | Create MAC objects |
►CWifiMacQueue | This queue implements the timeout procedure described in (Section 9.19.2.6 "Retransmit procedures" paragraph 6; IEEE 802.11-2012) |
CItem | A struct that holds information about a packet for putting in a packet queue |
CWifiMacTrailer | Implements the IEEE 802.11 MAC trailer |
CWifiMode | Represent a single transmission modeA WifiMode is implemented by a single integer which is used to lookup in a global array the characteristics of the associated transmission mode |
CWifiModeChecker | AttributeChecker implementation for WifiModeValue |
►CWifiModeFactory | Create WifiMode class instances and keep track of them |
CWifiModeItem | This is the data associated to a unique WifiMode |
CWifiModeValue | AttributeValue implementation for WifiMode |
CWifiNetDevice | Hold together all Wifi-related objects |
CWifiPhy | 802.11 PHY layer model |
CWifiPhyHelper | Create PHY objects |
CWifiPhyListener | Receive notifications about phy events |
CWifiPhyStateHelper | This objects implements the PHY state machine of the Wifi device |
CWifiRadioEnergyModel | A WiFi radio energy model |
CWifiRadioEnergyModelHelper | Assign WifiRadioEnergyModel to wifi devices |
CWifiRadioEnergyModelPhyListener | A WifiPhy listener class for notifying the WifiRadioEnergyModel of Wifi radio state change |
CWifiRemoteStation | Hold per-remote-station state |
CWifiRemoteStationInfo | Tid independent remote station statistics |
CWifiRemoteStationManager | Hold a list of per-remote-station state |
CWifiRemoteStationState | A struct that holds information about each remote station |
CWifiSpectrumModel5MhzInitializer | |
CWifiSpectrumValue5MhzFactory | Implements WifiSpectrumValue for the 2.4 GHz ISM band only, with a 5 MHz spectrum resolution |
CWifiSpectrumValueHelper | This abstract class defines the interface for interacting with all WifiSpectrumValue implementations |
CWifiTxCurrentModel | Modelize the transmit current as a function of the transmit power and mode |
CWifiTxVector | This class mimics the TXVECTOR which is to be passed to the PHY in order to define the parameters which are to be used for a transmission |
CWimaxChannel | |
CWimaxConnection | |
CWimaxHelper | Helps to manage and create WimaxNetDevice objects |
►CWimaxMacQueue | |
CQueueElement | |
CWimaxMacToMacHeader | This class implements the mac to mac header needed to dump a wimax pcap file The header format was reverse-engineered by looking at existing live pcap traces which could be opened with wireshark i.e., we have no idea where this is coming from |
CWimaxNetDevice | Hold together all Wimax-related objects in a NetDevice |
CWimaxPhy | |
CWScalingTestCase | |
CX2CellInfo | |
CX2IfaceInfo | |
CXmlConfigLoad | |
CXmlConfigSave | |
CYansErrorRateModel | Model the error rate for different modulations |
CYansWavePhyHelper | To trace WaveNetDevice, we have to overwrite the trace functions of class YansWifiPhyHelper |
CYansWifiChannel | A Yans wifi channelThis wifi channel implements the propagation model described in "Yet Another Network Simulator", (http://cutebugs.net/files/wns2-yans.pdf) |
CYansWifiChannelHelper | Manage and create wifi channel objects for the yans model |
CYansWifiPhy | 802.11 PHY layer modelThis PHY implements a model of 802.11a |
CYansWifiPhyHelper | Make it easy to create and manage PHY objects for the yans model |
CZetaRandomVariable | The zeta distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically |
CZipfRandomVariable | The Zipf distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically |
►Nolsr | |
CShowOlsrRoutingTable | |
►Npython-unit-tests | |
CTestSimulator | |
►Nsample-simulator | |
CMyModel | |
►Nshow_last_packets | |
►CShowLastPackets | |
CPacketList | |
►NTestBase | |
CTestBaseClass | |
►Nvisualizer | |
►Nbase | |
CInformationWindow | |
CLink | |
CNetDeviceTraits | |
CPyVizObject | |
►Ncore | |
CChannel | |
CNode | |
CShowTransmissionsMode | |
CSimulationThread | |
►CVisualizer | |
C_PanningState | |
CNodeDragState | |
CWiredLink | |
►Nhigcontainer | |
CHIGContainer | |
►Nhud | |
CAxes | |
►Nipython_view | |
CConsoleView | |
CIPythonView | |
CIterableIPShell | |
►Nsvgitem | |
CSvgItem | |
►Nwifi_intrastructure_link | |
CWifiLink | |
CWifiLinkMonitor | |
CAbstractAnimationInterfaceTestCase | |
CAcousticModemEnergyDepletionTestCase | |
CAcousticModemEnergyTestCase | |
CAddressAllocator6TestCase | |
CAddressAllocatorHelperTestCase | |
CAddressAllocatorTestCase | |
CAddressCollision6TestCase | |
CAddressCollisionTestCase | |
CAggregateObjectTestCase | |
CAlternateFindTestCase | |
CAlternateTestObject | |
CAnglesTestSuite | |
CAnimationInterfaceTestCase | |
CAnimationInterfaceTestSuite | |
CAnimationRemainingEnergyTestCase | |
CAnnexC_TestCase | |
CAodvExample | Test script |
CAodvRegressionTestSuite | |
CArray2D | |
CArray3D | |
CAsn1EncodingSuite | |
CAttributeDescriptor | Descriptor for an AttributeValue |
CAttributeObjectTest | |
CAttributesTestSuite | |
CAttributeTestCase | |
CAverageTestSuite | |
CBaseConfigObject | |
CBasicAddTestCase | |
CBasicCallbackTestCase | |
CBasicDataCalculatorsTestSuite | |
CBasicEnergyDepletionTest | Test case of energy depletion handling for BasicEnergySource and WifiRadioEnergyModel |
CBasicEnergyHarvesterTestCase | |
CBasicEnergyHarvesterTestSuite | |
CBasicEnergyUpdateTest | Test case of update remaining energy for BasicEnergySource and WifiRadioEnergyModel |
CBasicFindTestCase | |
CBasicRenameTestCase | |
CBasicTracedCallbackTestCase | |
CBatteryLifetimeTest | This example was originally devised as a test, then it was converted to an example |
CBearerTestData | |
CBench | |
CBenchHeader | |
CBenchTag | |
CBlockAckTestSuite | |
CBriteTestSuite | |
CBriteTopologyFunctionTestCase | |
CBriteTopologyStructureTestCase | |
CBufferTest | |
CBufferTestSuite | |
CBug555TestCase | Make sure that when multiple broadcast packets are queued on the same device in a short succession no virtual collision occurs |
CBug730TestCase | Make sure that when changing the fragmentation threshold during the simulation, the TCP transmission does not unexpectedly stop |
CBug772ChainTest | AODV deferred route lookup test case (see Bug 772) |
CBuildingData | Data to construct a Building object |
CBuildingPositionAllocatorTestSuite | |
CBuildingsHelperOneTestCase | |
CBuildingsHelperTestSuite | |
CBuildingsPathlossTestCase | |
CBuildingsPathlossTestSuite | Test 1.1 pathloss calculation |
CBuildingsShadowingTestCase | |
CBuildingsShadowingTestSuite | Test shadowing calculation |
CBuildProfileTestCase | |
CBuildProfileTestSuite | |
CBurstErrorModelSimple | |
Ccairo_int128_t | |
Ccairo_quorem128_t | |
Ccairo_quorem64_t | |
Ccairo_uquorem128_t | |
Ccairo_uquorem64_t | |
CCallbackTestClass | |
CCallbackTestParent | |
CCallbackTestSuite | |
CCallbackValueTestCase | |
CChainRegressionTest | AODV chain regression test |
CChannelAccessTestCase | |
CChannelCoordinationTestCase | |
CChannelRoutingTestCase | Route packets or frames in different approaches see 1609.4-2010 chapter 5.3.4 |
CCheckPointEvent | |
CCoDelQueueBasicDrop | |
CCoDelQueueBasicEnqueueDequeue | |
CCoDelQueueBasicOverflow | |
CCoDelQueueControlLawTest | |
CCoDelQueueNewtonStepTest | |
CCoDelQueueTestSuite | |
►CCollisionExperiment | |
CInput | |
COutput | |
CCollisionTestCase | |
CCommandLineBooleanTestCase | Test boolean Command Line processing |
CCommandLineIntTestCase | Test int Command Line processing |
CCommandLineStringTestCase | Test string Command Line processing |
CCommandLineTestCaseBase | A test base class that drives Command Line parsing |
CCommandLineTestSuite | The Test Suite that glues all of the Test Cases together |
CCommandLineUnsignedIntTestCase | Test unsigned int Command Line processing |
CConfigExample | |
CConfigStoreHelper | Simplifies config-store raw text load and save |
CConfigTestObject | |
CConfigTestSuite | |
CCoordinationTestListener | |
CCosineAntennaModelTestCase | |
CCosineAntennaModelTestSuite | |
CCreateObjectTestCase | |
CCsmaBridgeTestCase | |
CCsmaBroadcastTestCase | |
CCsmaMulticastTestCase | |
CCsmaOneSubnetTestCase | |
CCsmaPacketSocketTestCase | |
CCsmaPingTestCase | |
CCsmaRawIpSocketTestCase | |
CCsmaStarTestCase | |
CCsmaSystemTestSuite | |
CCtrlBAckResponseHeaderTest | |
CDcfManagerTest | |
►CDcfStateTest | |
CExpectedCollision | |
CDcfTestSuite | |
CDefaultHashTestCase | |
CDegreesRadiansTestSuite | |
CDegreesToRadiansTestCase | |
CDerived | |
CDerivedConfigObject | |
CDerivedConfigTestObject | |
CDiffTestCase | |
CDot11sRegressionSuite | |
CDot11sTestSuite | |
CDropTailQueueTestCase | |
CDropTailQueueTestSuite | |
CDsaRequestTestCase | |
CDsdvHeaderTestCase | |
CDsdvManetExample | |
CDsdvTableTestCase | |
CDsdvTestSuite | |
CDsrAckHeaderTest | |
CDsrAckReqHeaderTest | |
CDsrCacheEntryTest | |
CDsrFsHeaderTest | |
CDsrHeader | Header for Dsr Routing |
CDsrOptionRouteRequestHeader | Header of Dsr Option Route Request |
CDsrRerrHeaderTest | |
CDsrRrepHeaderTest | |
CDsrRreqHeaderTest | |
CDsrRreqTableTest | |
CDsrSendBuffTest | |
CDsrSRHeaderTest | |
CDsrTestSuite | |
CDualStackTestCase | |
CEmitter | |
CEnbDlTestData | |
CEnbTestData | |
CEnbUlTestData | |
CEpcS1uDlTestCase | |
CEpcS1uDlTestSuite | Test that the S1-U interface implementation works correctly |
CEpcS1uUlTestCase | |
CEpcS1uUlTestSuite | Test that the S1-U interface implementation works correctly |
CEpcTftClassifierTestCase | |
CEpcTftClassifierTestSuite | |
CEpsBearerTagUdpClient | |
CEpsGtpuHeaderTestCase | Test 1.Check header coding and decoding |
CEpsGtpuTestSuite | |
CErrorModelSimple | |
CErrorModelTestSuite | |
CEventGarbageCollectorTestCase | |
CEventGarbageCollectorTestSuite | |
CExampleAddress6GeneratorTestCase | |
CExampleAddressGeneratorTestCase | |
CExperiment | Helper class for UAN CW MAC example |
CFakeNetDevice | Example class with a method for the background task |
CFemtocellBlockAllocator | |
CFileHeaderTestCase | |
CFindPathTestCase | |
CFiveDoublesAverageTestCase | |
CFiveDoublesTestCase | |
CFiveIntegersAverageTestCase | |
CFiveIntegersTestCase | |
CFlameHeaderTest | Built-in self test for FlameHeader |
CFlameRegressionSuite | |
CFlameRegressionTest | FLAME protocol regression test of three stations: |
CFlameRtableTest | Unit test for FlameRtable |
CFlameTestSuite | |
CFnv1aTestCase | |
►CFriisPropagationLossModelTestCase | |
CTestVector | |
CFullyQualifiedAddTestCase | |
CFullyQualifiedFindTestCase | |
CFullyQualifiedRenameTestCase | |
CGeoToCartesianTestCase | |
CGeoToCartesianTestSuite | |
CGlobalPathlossDatabase | Store the last pathloss value for each TX-RX pair |
CGlobalRouteManagerImplTestCase | |
CGlobalRouteManagerImplTestSuite | |
CGlobalValueTestCase | |
CGlobalValueTestSuite | |
CHandoverEvent | |
CHandoverPreparationInfoTestCase | |
CHash32FunctionPtrTestCase | Test 32-bit function pointer |
CHash64FunctionPtrTestCase | Test 64-bit function pointer |
CHashTestCase | Base class for hash tests |
CHashTestSuite | Hash functions test suite |
CHistogramTestCase | |
CHistogramTestSuite | |
CHwmpDoRfRegressionTest | This is a test for intermediate reply and saving routing information about neighbour |
CHwmpProactiveRegressionTest | There are 5 stations set into a column, the center station is root |
CHwmpReactiveRegressionTest | Test for multihop path establishing and path error procedures Initiate scenario with 6 stations |
CHwmpRtableTest | Unit test for HwmpRtable |
CHwmpSimplestRegressionTest | Peering Management & HWM Protocol regression test Initiate scenario with 2 stations |
CIInterruptCallback | Struct interface to NSC soft interrupt capabilities |
Cin6_ifreq | Struct holding IPv6 address data |
CIncrementalTestCase | Test incremental hashing |
CINetDatagramSocket | Struct interface to NSC Datagram (i.e., UDP) Sockets |
CINetStack | Struct interface to NSC stack |
CINetStreamSocket | Struct interface to NSC Stream (i.e., TCP) Sockets |
CIntegerTraceSourceAttributeTestCase | |
CIntegerTraceSourceTestCase | |
►CInterferenceExperiment | |
CInput | |
CInterferenceHelperSequenceTest | See Bug 991 |
CIpAddressHelper | Helper to print a node's IP addresses |
CIpAddressHelperTestCasev4 | |
CIpAddressHelperTestCasev6 | |
CIpv4AddressGeneratorTestSuite | |
CIpv4AddressHelperTestSuite | |
CIpv4ARouting | |
CIpv4BRouting | |
CIpv4DynamicGlobalRoutingTestCase | |
CIpv4ForwardingTest | |
CIpv4ForwardingTestSuite | |
CIpv4FragmentationTest | |
CIpv4FragmentationTestSuite | |
CIpv4GlobalRoutingSlash32TestCase | |
CIpv4GlobalRoutingTestSuite | |
CIpv4HeaderTest | |
CIpv4HeaderTestSuite | |
CIpv4L3ProtocolTestCase | |
CIPv4L3ProtocolTestSuite | |
CIpv4ListRoutingNegativeTestCase | |
CIpv4ListRoutingPositiveTestCase | |
CIpv4ListRoutingTestSuite | |
CIpv4PacketInfoTagTest | |
CIpv4PacketInfoTagTestSuite | |
CIpv4RawSocketImplTest | |
CIpv4RawTestSuite | |
CIpv4StaticRoutingSlash32TestCase | |
CIpv4StaticRoutingTestSuite | |
CIPv4TestTag | |
CIpv6AddressGeneratorTestSuite | |
CIpv6AddressHelperTestSuite | |
CIpv6AddressTestCase1 | |
CIpv6AddressTestSuite | |
CIpv6ARouting | |
CIpv6BRouting | |
CIpv6DualStackTestSuite | |
CIpv6ExtensionHeaderTestSuite | |
CIpv6ForwardingTest | |
CIpv6ForwardingTestSuite | |
CIpv6FragmentationTest | |
CIpv6FragmentationTestSuite | |
CIpv6L3ProtocolTestCase | |
CIPv6L3ProtocolTestSuite | |
CIpv6ListRoutingNegativeTestCase | |
CIpv6ListRoutingPositiveTestCase | |
CIpv6ListRoutingTestSuite | |
CIpv6PacketInfoTagTest | |
CIpv6PacketInfoTagTestSuite | |
CIpv6RawSocketImplTest | |
CIpv6RawTestSuite | |
CIpv6RipngCountToInfinityTest | |
CIpv6RipngSplitHorizonStrategyTest | |
CIpv6RipngTest | |
CIpv6RipngTestSuite | |
CIPv6TestTag | |
CISendCallback | Struct interface to NSC send capabilities |
CIsotropicAntennaModelTestCase | |
CIsotropicAntennaModelTestSuite | |
CItuR1411LosPropagationLossModelTestCase | |
CItuR1411LosPropagationLossModelTestSuite | |
CItuR1411NlosOverRooftopPropagationLossModelTestCase | |
CItuR1411NlosOverRooftopPropagationLossModelTestSuite | |
CJakesPropagationExample | Constructs a JakesPropagationlossModel and print the loss value as a function of time into std::cout |
CKun2600MhzPropagationLossModelTestCase | |
CKun2600MhzPropagationLossModelTestSuite | |
CLenaCqaFfMacSchedulerTestCase1 | This is a system test program |
CLenaCqaFfMacSchedulerTestCase2 | |
CLenaDataPhyErrorModelTestCase | This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification |
CLenaDlCtrlPhyErrorModelTestCase | |
CLenaFdBetFfMacSchedulerTestCase1 | This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification |
CLenaFdBetFfMacSchedulerTestCase2 | |
CLenaFdMtFfMacSchedulerTestCase | This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification |
CLenaFdTbfqFfMacSchedulerTestCase1 | This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification |
CLenaFdTbfqFfMacSchedulerTestCase2 | |
CLenaHarqTestCase | This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification |
CLenaMimoTestCase | This system test program creates different test cases with a single eNB.. |
CLenaPfFfMacSchedulerTestCase1 | This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification |
CLenaPfFfMacSchedulerTestCase2 | |
CLenaPssFfMacSchedulerTestCase1 | This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification |
CLenaPssFfMacSchedulerTestCase2 | |
CLenaRrFfMacSchedulerTestCase | This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification |
CLenaTdBetFfMacSchedulerTestCase1 | This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification |
CLenaTdBetFfMacSchedulerTestCase2 | |
CLenaTdMtFfMacSchedulerTestCase | This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification |
CLenaTdTbfqFfMacSchedulerTestCase1 | This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification |
CLenaTdTbfqFfMacSchedulerTestCase2 | |
CLenaTestCqaFfMacSchedulerSuite | |
CLenaTestFdBetFfMacSchedulerSuite | |
CLenaTestFdMtFfMacSchedulerSuite | |
CLenaTestFdTbfqFfMacSchedulerSuite | |
CLenaTestHarqSuite | |
CLenaTestMimoSuite | |
CLenaTestPfFfMacSchedulerSuite | |
CLenaTestPhyErrorModelSuite | |
CLenaTestPssFfMacSchedulerSuite | |
CLenaTestRrFfMacSchedulerSuite | |
CLenaTestTdBetFfMacSchedulerSuite | |
CLenaTestTdMtFfMacSchedulerSuite | |
CLenaTestTdTbfqFfMacSchedulerSuite | |
CLenaTestTtaFfMacSchedulerSuite | |
CLenaTtaFfMacSchedulerTestCase | This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification |
CLiIonEnergySourceTestSuite | |
CLiIonEnergyTestCase | |
CLoadProfile | |
►CLogDistancePropagationLossModelTestCase | |
CTestVector | |
CLookupTimeTestCase | |
CLrWpanAckTestCase | |
CLrWpanAckTestSuite | |
CLrWpanCcaTestCase | |
CLrWpanCcaTestSuite | |
CLrWpanCollisionTestCase | |
CLrWpanCollisionTestSuite | |
CLrWpanEdTestCase | |
CLrWpanEdTestSuite | |
CLrWpanErrorDistanceTestCase | |
CLrWpanErrorModelTestCase | |
CLrWpanErrorModelTestSuite | |
CLrWpanPacketTestCase | |
CLrWpanPacketTestSuite | |
CLrWpanPlmeAndPdInterfaceTestCase | |
CLrWpanPlmeAndPdInterfaceTestSuite | |
CLrWpanSpectrumValueHelperTestCase | |
CLrWpanSpectrumValueHelperTestSuite | |
CLteAntennaTestSuite | |
►CLteCellSelectionTestCase | Testing the initial cell selection procedure by UE at IDLE state in the beginning of simulation |
CUeSetup_t | A set of input parameters for setting up a UE in the simulation |
CLteCellSelectionTestSuite | Test suite for executing the cell selection test cases in without-EPC and with-EPC scenarios |
CLteCqiGenerationDlPowerControlTestCase | |
CLteCqiGenerationTestCase | |
CLteCqiGenerationTestSuite | |
CLteDistributedFfrAreaTestCase | |
CLteDownlinkCtrlSinrTestCase | |
CLteDownlinkDataSinrTestCase | |
CLteDownlinkPowerControlRrcConnectionReconfigurationTestCase | |
CLteDownlinkPowerControlSpectrumValueTestCase | |
CLteDownlinkPowerControlTestCase | |
CLteDownlinkPowerControlTestSuite | Test 1.1 SINR calculation in downlink |
CLteDownlinkSinrTestSuite | Test 1.1 SINR calculation in downlink |
CLteEarfcnDlTestCase | |
CLteEarfcnTestCase | |
CLteEarfcnTestSuite | Test the calculation of carrier frequency based on EARFCN |
CLteEarfcnUlTestCase | |
CLteEnbAntennaTestCase | |
CLteEnhancedFfrAreaTestCase | |
CLteEpcE2eDataTestCase | |
CLteEpcE2eDataTestSuite | Test that the S1-U interface implementation works correctly |
CLteFadingSystemTestCase | |
CLteFadingTestCase | |
CLteFadingTestSuite | Test 1.1 fading model |
CLteFrAreaTestCase | |
CLteFrequencyReuseTestSuite | Test Downlink FFR algorithms |
CLteFrTestCase | |
CLteHandoverDelayTestCase | |
CLteHandoverDelayTestSuite | |
CLteHandoverTargetTestCase | Testing a handover algorithm, verifying that it selects the right target cell when more than one options available |
CLteHandoverTargetTestSuite | Test suite lte-handover-target , verifying that handover algorithms are able to select the right target cell |
CLteHardFrTestCase | |
CLteInterferenceFrTestSuite | Test Interference level with FR algorithms |
CLteInterferenceHardFrTestCase | |
CLteInterferenceStrictFrTestCase | |
CLteInterferenceTestCase | |
CLteInterferenceTestSuite | Test that SINR calculation and MCS selection works fine in a multi-cell interference scenario |
CLteLinkAdaptationTestCase | |
CLteLinkAdaptationTestSuite | Test 1.3 Link adaptation |
CLteNoisePsdTestCase | |
CLtePathlossModelSystemTestCase | |
CLtePathlossModelTestSuite | Test 1.1 pathloss calculation |
CLteRlcAmE2eTestCase | Test cases used for the test suite lte-rlc-am-e2e |
CLteRlcAmE2eTestSuite | Provides the test suite lte-rlc-am-e2e |
CLteRlcAmTransmitterConcatenationTestCase | Test 4.1.1.3 Concatenation (n SDUs => One PDU) |
CLteRlcAmTransmitterOneSduTestCase | Test 4.1.1.1 One SDU, One PDU |
CLteRlcAmTransmitterReportBufferStatusTestCase | Test 4.1.1.4 Report Buffer Status (test primitive parameters) |
CLteRlcAmTransmitterSegmentationTestCase | Test 4.1.1.2 Segmentation (One SDU => n PDUs) |
CLteRlcAmTransmitterTestCase | |
CLteRlcAmTransmitterTestSuite | TestSuite 4.1.1 RLC AM: Only transmitter |
CLteRlcUmE2eTestCase | |
CLteRlcUmE2eTestSuite | Test x.x.x RLC UM: End-to-end flow |
CLteRlcUmTransmitterConcatenationTestCase | Test 4.1.1.3 Concatenation (n SDUs => One PDU) |
CLteRlcUmTransmitterOneSduTestCase | Test 4.1.1.1 One SDU, One PDU |
CLteRlcUmTransmitterReportBufferStatusTestCase | Test 4.1.1.4 Report Buffer Status (test primitive parameters) |
CLteRlcUmTransmitterSegmentationTestCase | Test 4.1.1.2 Segmentation (One SDU => n PDUs) |
CLteRlcUmTransmitterTestCase | |
CLteRlcUmTransmitterTestSuite | TestSuite 4.1.1 RLC UM: Only transmitter |
CLteRrcConnectionEstablishmentErrorTestCase | |
CLteRrcConnectionEstablishmentTestCase | |
CLteRrcTestSuite | |
CLteSoftFfrAreaTestCase | |
CLteSoftFrAreaTestCase | |
CLteSpectrumModelTestCase | |
CLteSpectrumValueHelperTestSuite | |
CLteStrictFrAreaTestCase | |
CLteStrictFrTestCase | |
CLteTxPsdTestCase | |
CLteUeMeasurementsHandoverTestCase | Testing UE measurements in LTE with simulation of 2 eNodeB and 1 UE in a handover configuration |
CLteUeMeasurementsHandoverTestSuite | Test suite for generating calls to UE measurements test case ns3::LteUeMeasurementsHandoverTestCase |
CLteUeMeasurementsPiecewiseTestCase1 | Testing UE measurements in LTE with simulation of 1 eNodeB and 1 UE in piecewise configuration and 120 ms report interval |
CLteUeMeasurementsPiecewiseTestCase2 | Testing UE measurements in LTE with simulation of 2 eNodeB and 1 UE in piecewise configuration and 240 ms report interval |
CLteUeMeasurementsPiecewiseTestSuite1 | Test suite for generating calls to UE measurements test case ns3::LteUeMeasurementsPiecewiseTestCase1 |
CLteUeMeasurementsPiecewiseTestSuite2 | Test suite for generating calls to UE measurements test case ns3::LteUeMeasurementsPiecewiseTestCase2 |
CLteUeMeasurementsTestCase | |
CLteUeMeasurementsTestSuite | Test that UE Measurements (see 36.214) calculation works fine in a multi-cell interference scenario |
CLteUplinkClosedLoopPowerControlAbsoluteModeTestCase | |
CLteUplinkClosedLoopPowerControlAccumulatedModeTestCase | |
CLteUplinkDataSinrTestCase | |
CLteUplinkOpenLoopPowerControlTestCase | |
CLteUplinkPowerControlTestCase | |
CLteUplinkPowerControlTestSuite | Test 1.1 Uplink Power Control |
CLteUplinkSinrTestSuite | Test 1.2 SINR calculation in uplink |
CLteUplinkSrsSinrTestCase | |
►CLteX2HandoverMeasuresTestCase | |
CBearerData | |
CUeData | |
CLteX2HandoverMeasuresTestSuite | |
►CLteX2HandoverTestCase | |
CBearerData | |
CUeData | |
CLteX2HandoverTestSuite | |
CMakeBoundCallbackTestCase | |
CMakeCallbackTemplatesTestCase | |
CMakeCallbackTestCase | |
CManyUniformRandomVariablesOneGetValueCallTestCase | |
CManyUniformRandomVariablesOneGetValueCallTestSuite | |
CMatrixPropagationLossModelTestCase | |
CMeasurementReportTestCase | |
CMeshHeaderTest | Built-in self test for FlameHeader |
CMeshInformationElementVectorBist | Built-in self test for MeshInformationElementVector and all IE |
CMeshTest | |
CMeshTestSuite | |
CMobilityTestSuite | |
CMobilityTraceTestCase | |
CMobilityTraceTestSuite | |
CMurmur3TestCase | |
CMyApp | |
CMyCb | Example Callback class |
CMyHeader | |
CMyModel | Simple model object to illustrate event handling |
CMyObject | |
CMyTag | |
CNamesTestSuite | |
CNetAnimExperiment | Helper class for UAN CW MAC example |
CNetworkAllocatorHelperTestCase | |
CNetworkAndAddress6TestCase | |
CNetworkAndAddressTestCase | |
CNetworkNumber6AllocatorTestCase | |
CNetworkNumberAllocatorTestCase | |
CNoCount | |
CNodeStatistics | |
►CNs2MobilityHelperTest | Every test case is supposed to: |
CReferencePoint | Single record in mobility reference |
CNs2MobilityHelperTestSuite | The test suite |
►CNs3TcpCwndTestCase1 | |
CCwndEvent | |
►CNs3TcpCwndTestCase2 | |
CCwndEvent | |
CNs3TcpCwndTestSuite | |
CNs3TcpInteroperabilityTestCase | |
CNs3TcpInteroperabilityTestSuite | |
CNs3TcpLossTestCase | |
CNs3TcpLossTestSuite | |
CNs3TcpNoDelayTestCase | |
CNs3TcpNoDelayTestSuite | |
CNs3TcpSocketTestCase1 | |
CNs3TcpSocketTestCase2 | |
CNs3TcpSocketTestSuite | |
CNs3TcpStateTestCase | |
CNs3TcpStateTestSuite | |
CNs3WimaxCsParamTlvTestCase | |
CNs3WimaxFragmentationTestCase | |
CNs3WimaxFragmentationTestSuite | |
CNs3WimaxMacMessagesTestSuite | |
CNs3WimaxManagementConnectionsTestCase | |
CNs3WimaxNetworkEntryTestCase | |
CNs3WimaxPhyTestSuite | |
CNs3WimaxQoSTestSuite | |
CNs3WimaxSchedulingTestCase | |
CNs3WimaxServiceFlowTestSuite | |
CNs3WimaxSfCreationTestCase | |
CNs3WimaxSfTlvTestCase | |
CNs3WimaxSFTypeTestCase | |
CNs3WimaxSimpleOFDMTestCase | |
CNs3WimaxSNRtoBLERTestCase | |
CNs3WimaxSSMacTestSuite | |
CNs3WimaxTlvTestSuite | |
CNscTcpLossTestCase1 | |
CNscTcpLossTestCase2 | |
CNscTcpLossTestSuite | |
CNullifyCallbackTestCase | |
CObjectFactoryTestCase | |
CObjectMapAttributeTestCase | |
CObjectTestSuite | |
CObjectVectorAttributeTestCase | |
CObjectVectorConfigTestCase | |
CObjectVectorTraceConfigTestCase | |
COcbTestSuite | |
COcbWifiMacTestCase | |
COkumuraHataPropagationLossModelTestCase | |
COkumuraHataPropagationLossModelTestSuite | |
COlsrEmfTestCase | |
COlsrHelloTestCase | |
COlsrHnaTestCase | |
COlsrMidTestCase | |
COlsrMprTestCase | Testcase for MPR computation mechanism |
COlsrProtocolTestSuite | |
COlsrTcTestCase | |
COlsrTestSuite | |
COneIntegerAverageTestCase | |
COneIntegerTestCase | |
COneUniformRandomVariableManyGetValueCallsTestCase | |
COneUniformRandomVariableManyGetValueCallsTestSuite | |
COneVectorConstructorTestCase | |
COptionField | Option field for an DsrFsHeader Enables adding options to an DsrFsHeader |
COptionWithAlignmentHeader | |
COptionWithoutAlignmentHeader | |
CPacketBufferingCaseA | This simple test verifies the correctness of buffering for packets received under block ack |
CPacketBufferingCaseB | |
CPacketEntry | |
CPacketLossCounterTestCase | Test that all the PacketLossCounter class checks loss correctly in different cases |
CPacketMetadataTest | |
CPacketMetadataTestSuite | |
CPacketSocketAppsTest | |
CPacketSocketAppsTestSuite | |
CPacketTagListTest | |
CPacketTest | |
CPacketTestSuite | |
CParabolicAntennaModelTestCase | |
CParabolicAntennaModelTestSuite | |
CPbbTestCase | |
CPbbTestSuite | |
CPcapFileTestSuite | |
CPeerLinkFrameStartTest | Built-in self test for PeerLinkFrameStart |
CPeerManagementProtocolRegressionTest | Peering Management Protocol regression test |
CPointerAttributeTestCase | |
CPointToPointTest | Test class for PointToPoint model |
CPointToPointTestSuite | TestSuite for PointToPoint module |
CPositionInBuilding | |
CPowerRateAdaptationTest | |
CPowerRateAdaptationTestSuite | |
CProbeTestCase1 | |
CProbeTestSuite | |
CPropagationLossModelsTestSuite | |
►CPsrExperiment | |
CInput | |
COutput | |
CPtrExample | Example class illustrating use of Ptr |
CPtrTestBase | |
CPtrTestCase | |
CPtrTestSuite | |
CQosUtilsIsOldPacketTest | |
CRadiansToDegreesTestCase | |
CRandCartAroundGeoTestCase | |
CRandCartAroundGeoTestSuite | |
CRandomRoomPositionAllocatorTestCase | |
CRandomVariableStreamAttributeTestCase | |
CRandomVariableStreamConstantTestCase | |
CRandomVariableStreamDeterministicTestCase | |
CRandomVariableStreamEmpiricalAntitheticTestCase | |
CRandomVariableStreamEmpiricalTestCase | |
CRandomVariableStreamErlangAntitheticTestCase | |
CRandomVariableStreamErlangTestCase | |
CRandomVariableStreamExponentialAntitheticTestCase | |
CRandomVariableStreamExponentialTestCase | |
CRandomVariableStreamGammaAntitheticTestCase | |
CRandomVariableStreamGammaTestCase | |
CRandomVariableStreamLogNormalAntitheticTestCase | |
CRandomVariableStreamLogNormalTestCase | |
CRandomVariableStreamNormalAntitheticTestCase | |
CRandomVariableStreamNormalTestCase | |
CRandomVariableStreamParetoAntitheticTestCase | |
CRandomVariableStreamParetoTestCase | |
CRandomVariableStreamSequentialTestCase | |
CRandomVariableStreamTestSuite | |
CRandomVariableStreamUniformAntitheticTestCase | |
CRandomVariableStreamUniformTestCase | |
CRandomVariableStreamWeibullAntitheticTestCase | |
CRandomVariableStreamWeibullTestCase | |
CRandomVariableStreamZetaAntitheticTestCase | |
CRandomVariableStreamZetaTestCase | |
CRandomVariableStreamZipfAntitheticTestCase | |
CRandomVariableStreamZipfTestCase | |
CRangePropagationLossModelTestCase | |
CReadFileTestCase | |
CReadModeCreateTestCase | |
CReceiver | |
CRecordHeaderTestCase | |
CRedQueueTestCase | |
CRedQueueTestSuite | |
CRegressionTestSuite | |
CRelativeAddTestCase | |
CRelativeFindTestCase | |
CRelativeRenameTestCase | |
CResetAllocatorHelperTestCase | |
Crgb | |
CRngExponentialTestCase | |
CRngNormalTestCase | |
CRngParetoTestCase | |
CRngTestSuite | |
CRngUniformTestCase | |
CRocketfuelTopologyReaderTest | |
CRocketfuelTopologyReaderTestSuite | |
CRoom | |
CRootNamespaceConfigTestCase | |
CRoutingExperiment | |
CRoutingHelper | Generates routing data between nodes (vehicles) and uses the RoutingStats class to collect statistics on routing data (application-data packet and byte counts) |
CRoutingStats | Manages collects statistics on routing data (application-data packet and byte counts) for the vehicular network |
CRrcConnectionReconfigurationCompleteTestCase | |
CRrcConnectionReconfigurationTestCase | |
CRrcConnectionReestablishmentCompleteTestCase | |
CRrcConnectionReestablishmentRequestTestCase | |
CRrcConnectionReestablishmentTestCase | |
CRrcConnectionRejectTestCase | |
CRrcConnectionRequestTestCase | |
CRrcConnectionSetupCompleteTestCase | |
CRrcConnectionSetupTestCase | |
CRrcHeaderTestCase | This class provides common functions to be inherited by the children TestCases |
CRttEstimatorTestCase | |
CRttEstimatorTestSuite | |
CSameRoomPositionAllocatorTestCase | |
CSampleEmitter | |
CSampleTestCase1 | |
CSampleTestSuite | |
CSearchAttributesOfParentObjectsTestCase | |
CSender | |
CSequenceNumberTestCase | |
CSequenceNumberTestObj | |
CSequenceNumberTestSuite | |
CSimpleSource | |
CSimulatorEventsTestCase | |
CSimulatorTemplateTestCase | |
CSimulatorTestSuite | |
CSixlowpanFragmentationTest | |
CSixlowpanFragmentationTestSuite | |
CSixlowpanHc1ImplTest | |
CSixlowpanHc1TestSuite | |
CSixlowpanIphcImplTest | |
CSixlowpanIphcTestSuite | |
CSpectrumConverterTestSuite | |
CSpectrumIdealPhyTestCase | |
CSpectrumIdealPhyTestSuite | |
CSpectrumInterferenceTestCase | |
CSpectrumInterferenceTestSuite | |
CSpectrumValueTestCase | |
CSpectrumValueTestSuite | |
CStackHelper | Helper to set or get some IPv6 information about nodes |
CStaticInformation | Gather aggregation and configuration path information from registered types |
CSteadyStateRandomWaypointTest | |
CSteadyStateRandomWaypointTestSuite | |
CStringContextAddTestCase | |
CStringContextFindTestCase | |
CStringContextRenameTestCase | |
CSwitchFlowTableTestCase | |
CSwitchTestSuite | |
CTcpHighSpeedTest | |
CTcpTestCase | |
CTcpTestSuite | |
CTestCaseHelper | |
CTestEmptyOptionField | |
CTestFulfilledAlignment | |
CTestObject | |
CTestOptionWithAlignment | |
CTestOptionWithoutAlignment | |
CTestUtils | |
CThreadedSimulatorEventsTestCase | |
CThreadedSimulatorTestSuite | |
CTimeInputOutputTestCase | |
CTimerStateTestCase | |
CTimerTemplateTestCase | |
CTimerTestSuite | |
CTimeSimpleTestCase | |
CTimestampTag | |
CTimeTestSuite | |
CTimeWithSignTestCase | |
CTracedCallbackTestCase | |
CTracedCallbackTestSuite | |
►CTracedCallbackTypedefTestCase | |
CChecker | Callback checkers |
CChecker< T1, empty, empty, empty, empty > | |
CChecker< T1, T2, empty, empty, empty > | |
CChecker< T1, T2, T3, empty, empty > | |
CChecker< T1, T2, T3, T4, empty > | |
CCheckerBase | Invoker boilerplate |
CTracedCallbackTypedefTestSuite | |
►CTracedValueCallbackTestCase | |
CCheckTvCb | A class to check that the callback function typedef will actually connect to the TracedValue |
CTracedValueCallbackTestSuite | |
CTunnel | |
CTvHelperDistributionTestCase | |
CTvHelperDistributionTestSuite | |
CTvSpectrumTransmitterTestCase | |
CTvSpectrumTransmitterTestSuite | |
CTwoLevelAggregationTest | |
►CTwoRayGroundPropagationLossModelTestCase | |
CTestVector | |
CTwoVectorsConstructorTestCase | |
CTxDurationTest | |
CTxDurationTestSuite | |
CTypeIdPerformanceSuite | |
CTypeIdTestSuite | |
►CTypeTraits | Inspect a type to deduce its features |
CBase | Base type, after removing & , * and const |
CBase< const U > | Base type, after removing const |
CBase< U & > | Base type, after removing & |
CBase< U * > | Base type, after removing * |
CFunctionPtrTraits | Not a function pointer type |
CFunctionPtrTraits< U(*)(V1)> | Function pointer type |
CFunctionPtrTraits< U(*)(V1, V2)> | Function pointer type |
CFunctionPtrTraits< U(*)(V1, V2, V3)> | Function pointer type |
CFunctionPtrTraits< U(*)(V1, V2, V3, V4)> | Function pointer type |
CFunctionPtrTraits< U(*)(V1, V2, V3, V4, V5)> | Function pointer type |
CFunctionPtrTraits< U(*)(V1, V2, V3, V4, V5, V6)> | Function pointer type |
CFunctionPtrTraits< U(*)(void)> | Function pointer type |
CNullType | Null value type traits |
CPointerTraits | Not a pointer type |
CPointerTraits< ns3::Ptr< U > > | Ptr type |
CPointerTraits< U * > | Pointer type |
CPtrBase | Base type of a Ptr |
CPtrBase< ns3::Ptr< U > > | Base type of a Ptr |
CPtrToMemberTraits | Not a pointer to member type |
CPtrToMemberTraits< U(V::*)(void) const > | Pointer to const member function |
CPtrToMemberTraits< U(V::*)(void)> | Pointer to member function |
CPtrToMemberTraits< U(V::*)(W1) const > | Pointer to const member function |
CPtrToMemberTraits< U(V::*)(W1)> | Pointer to member function |
CPtrToMemberTraits< U(V::*)(W1, W2) const > | Pointer to const member function |
CPtrToMemberTraits< U(V::*)(W1, W2)> | Pointer to member function |
CPtrToMemberTraits< U(V::*)(W1, W2, W3) const > | Pointer to const member function |
CPtrToMemberTraits< U(V::*)(W1, W2, W3)> | Pointer to member function |
CPtrToMemberTraits< U(V::*)(W1, W2, W3, W4) const > | Pointer to const member function |
CPtrToMemberTraits< U(V::*)(W1, W2, W3, W4)> | Pointer to member function |
CPtrToMemberTraits< U(V::*)(W1, W2, W3, W4, W5) const > | Pointer to const member function |
CPtrToMemberTraits< U(V::*)(W1, W2, W3, W4, W5)> | Pointer to member function |
CPtrToMemberTraits< U(V::*)(W1, W2, W3, W4, W5, W6) const > | Pointer to const member function |
CPtrToMemberTraits< U(V::*)(W1, W2, W3, W4, W5, W6)> | Pointer to member function |
CReferenceTraits | Not a reference type |
CReferenceTraits< U & > | Reference type |
CUnConst | Not a const type |
CUnConst< const U > | Const type |
CTypeTraitsTestCase | |
CTypeTraitsTestSuite | |
CUanEnergyModelTestSuite | Unit test suite for underwater energy model |
CUanTest | |
CUanTestSuite | |
CUdp6SocketImplTest | |
CUdp6SocketLoopbackTest | |
CUdpClientServerTestCase | Test that all the udp packets generated by an udpClient application are correctly received by an udpServer application |
CUdpClientServerTestSuite | |
CUdpEchoClientSetFillTestCase | Test fix for Bug 1378 |
CUdpSocketImplTest | |
CUdpSocketLoopbackTest | |
CUdpTestSuite | |
CUdpTraceClientServerTestCase | Test that all the udp packets generated by an udpTraceClient application are correctly received by an udpServer application |
CUeDlTestData | |
CUeTestData | |
CUeUlTestData | |
CUnderRootNamespaceConfigTestCase | |
CUniqueTypeIdTestCase | |
CValueClassTest | Test class for TracedValue callbacks |
CValueClassTestChecker | |
CValueClassTestValue | |
CVanetRoutingExperiment | Implements a wifi app that allows VANET routing experiments to be simulated |
CWatchdogTestCase | |
CWatchdogTestSuite | |
CWaveformGeneratorTestCase | |
CWaveformGeneratorTestSuite | |
CWaveMacTestSuite | |
CWaveNetDeviceExample | This simulation is to show the routing service of WaveNetDevice described in IEEE 09.4 |
CWaypointInitialPositionIsWaypoint | |
CWaypointLazyNotifyFalse | |
CWaypointLazyNotifyTrue | |
CWaypointMobilityModelNotifyTest | |
CWaypointMobilityModelTestSuite | |
CWaypointMobilityModelViaHelper | |
CWifiAggregationTestSuite | |
CWifiApp | Enforces program flow for ns-3 wifi applications |
CWifiInterferenceTestCase | |
CWifiInterferenceTestSuite | |
CWifiMsduAggregatorTestSuite | |
CWifiMsduAggregatorThroughputTest | |
CWifiPhyStats | Collects Wifi MAC/PHY statistics |
CWifiTest | |
CWifiTestSuite | |
CWriteModeCreateTestCase | |