GSOC2025IcmpSocket

From Nsnam
Jump to navigation Jump to search

Main Page - Roadmap - Summer Projects - Project Ideas - Developer FAQ - Tools - Related Projects

HOWTOs - Installation - Troubleshooting - User FAQ - Samples - Models - Education - Contributed Code - Papers

Back to GSoC 2025 projects

Project Overview

  • Project Name: ICMP socket and generate/handle ICMP messages (host/net unreachable)
  • Student: Aditya Ruhela
  • Mentors: Tommaso Pecorella and Alberto Gallegos Ramonet
  • Google page:
  • Project Goals: Develop an ICMP socket according to LINUX implementation of ICMP SOCK_DGRAM and SOCK_RAW
  • Repository:
  • About Me: Hi, I am Aditya Ruhela and I am a graduate from Indian Institute of Technology, Mandi. I have been working with ns-3 for about a year now. I have worked on implementation and analysis of 802.11bd as my 4th year project.
  • Design Document:

Some highlights about the SOCK_DGRAM socket: 1. This is an L3 socket because ICMP is an L3 aspect, unlike UDP, TCP because it neither does it have any role in Transport functionality, nor does it do port-to-port mapping like previously mentioned L4 protocols.

2. The user can only send ECHO_REQUEST. The other types of packets cannot be sent.

3. The user may be notified only about ECHO_REPLY and ERRORS. For that, the user has to setRecvCallback and setErrorCallback (new).

setErrorCallback is a new function that is introduced for this specific socket. This will correctly mimic the error queue icmp socket. If wanted, setErrorCallback can be removed and we can have a single setRecvCallback and the user will have to check the packet received whether is it an error or not.

Let's see the ICMP v4 socket:

Now, let's go over the functions: 1. bind(): Sets the local address of the socket. Just like other sockets. 2. connect(): Sets the destination address for the packet. Again, just like other sockets. 3. close(): Free up the socket. Just like other sockets.

4. send(): The application will call this function to send packet. This is the function responsible for adding the icmp and then passing it to the ip protocol. 5. receive(): It receives a packet. It then gets the type of packet: req, reply, ttl exceeded or dest unreach. It then calls the specific handler. 6. handle_echo_request(): It creates an icmp echo reply with the same payload and sends it back to the sender. THIS PACKET IS NOT SENT UP TO THE APPLICATION. 7. handle_echo_reply(): It sends the echo_reply up to the application. It calls the m_receivedCallback function, if set by the application using setRecvCallback. 8. handle_ttl_exceeded(): It sends the ttl error up to the application. It calls the m_ErrorCallback function, if set by the user using setErrorCallback. 9. handle_dest_unreach(): Just like handle_ttl_exceeded but for dest_unreach packet. 10. setRecvCallback, setErrorCallback will be used to set the m_receivedCallback and m_ErrorCallback respectively.

Milestones