App Store Technical Requirements
- 1 Background
- 2 Workflows
- 3 Requirements
- 4 Enhancements
- 5 contrib module requirements for ns-3.29
The goal is to support modularization of the ns-3 code base and federation of development activities. To date, the main path to distributing extensions to ns-3 has been to request a code review for merge to the mainline tree. The future goal is to shrink the ns-3 core, and to better facilitate modules that are independently developed and maintained. As a concrete example, the R statistical framework does not integrate every extension to its main release; instead, it allows users to fetch the packages of interest and add to their installation. Communities-of-interest have even arisen to allow researchers to organize and curate sets of R extensions (e.g. bioinformatic packages). We envision the same for ns-3.
In the ns-3.27 release, the bake build orchestration tool was extended to allow third party contributed code modules to be added to ns-3, and to be downloaded, built, and installed with the main ns-3 release. This allows modules to be hosted elsewhere and integrated with the ns-3-allinone framework. Consider this to be the back-end support for modularization. We have not gone further since that time.
For example, the sift routing code contribution has been added as a module. Please review how users are expected to add sift to their ns-3.27 release on this wiki page.
There are two main components:
1) front end The ns-3 app store (https://apps.nsnam.org) is largely operational and will be put into actual use for ns-3.29. The app store can be used to directly download contributed modules, and to post information about the module.
2) back end The back end will be the bake build orchestration tool.
We envision three types of users:
- . End user: The normal user will browse to the app store to learn about available apps, learn about resources (user forums, documentation) about each app, and possibly leave feedback on a review board. The normal user will obtain the necessary information to fetch and install each app from this page.
- . Developer: Developers will not be able to create new apps on the app store, but will be able to edit the app page that he or she owns. To make an app available on the store, it has to go through an ns-3 review process.
- . Maintainer: ns-3 maintainers will create a new page for an accepted app, and create a developer account for the author. Then the developer will be able to edit the page to suit their app.
The following requirements were used to develop the app store (https://apps.nsnam.org).
- . The front page should be clean, consisting of categories, newest releases, and popular downloads.
- . Each "app" will be an ns-3 module, with a description page including: Description, screenshots (optional), download tab, resources tab, etc.
- . Clear documentation must be posted on how to use the app store, and how to submit a new app to the app store
- . The "Download" tab will fetch a source archive, and the user will download to a location of their choice. The user is responsible for moving or copying the package to their ns-3 development directory, and then the ns-3 build tools (invoked at command line by users in the normal way) will do the rest.
- . XML for the bake configuration will also be maintained for each module, allowing module contributors to post new releases of their module.
Once the basic capability is deployed, enhancements are possible. Some of these extensions may involve modifying the app store installation, but some will involve modifying ns-3 build scripts, documentation, and other scripts (e.g. Jenkins scripts).
Integration with bake
Bake uses XML to describe modules. It would be nice to have a standardized XML schema that describes an ns-3 module, and make it usable from both the app store and from bake. For instance, there could be an "authors" field in the XML description that can be displayed by bake at the command line and can also be parsed and shown as the Authors in the app store description.
User feedback and comments
We probably want to explore and tailor the capability for users to provide feedback and hints about apps. We do not want the capability to be abused by spammers (e.g. a captcha?).
Documentation and module creation scripts
- Doxygen and Sphinx scripts should be modified to allow building on a per-module basis; ns-3 web site should still integrate all of these module documentations coherently
- The create-module.py program should be updated
- The ns-3 tutorial must be updated
We need to write some new Jenkins scripts to test the known modules for regressions.
Managing the version numbers of different apps will be necessary. We want users to be able to declare that apps are compatible with specific ns-3 versions.
Apps may fall out of date (become unmaintained) but it may be the case that some simple patches could be applied on top of them to make them workable again with the latest ns-3. The framework should support the ability to declare that a module installation consists of downloading an archive and then patching it with a file fetched from elsewhere. A module may also require patching of ns-3 core itself; the framework should support this.
If some modules depend on other modules or system dependencies, that needs to be expressed and handled by the tools. This is mainly a bake build issue, but it probably requires also some documentation in the app store that the module depends, for example, on a system library such as Boost.
We will probably want support for groups of modules. Users should be able to specify, for example, "Ad hoc routing" and fetch modules for several protocols, which may be hosted at different sites.
contrib module requirements for ns-3.29
1. The source code layout of a module is the same as a module found in the
src directory of ns-3:
bindings doc examples helper model test wscript
2. Additionally, the module must contain two version files.
VERSION is the version number of the module, and should be a conventional sequence-based identifier (such as '1.0.0') allowing users to easily interpret older and newer versions.
NS3-VERSION is a recommended or known-good version of ns-3 with which the module is compatible, and should just be a single line.
release <release tag number>
changeset <mercurial changeset hash>
The build system will use the NS3-VERSION to warn of possible incompatibilities.
3. The source code must be provided from a hosting provider such as GitHub or Bitbucket, or as an source archive downloadable from the web. The module should be provided such that it can be cloned directly (or untarred) into the contrib directory without cloning also the upstream ns-3-dev repository.
$ cd ns-3-allinone/ns-3-dev/contrib $ git clone https://github.com/sampleuser/sample-module $ ls sample-module bindings doc examples helper model NS3-VERSION test VERSION
4. The module should be named in lowercase with hyphen separation of words, similar to ns-3
src directory conventions.
5. All module C++ source code should be put into a separate C++ namespace within ns3 namespace, corresponding to the module name, similar to how ns-3's aodv and olsr are structured.
create-module.py should be moved to the contrib/ directory, and documentation updated to describe this change.
The below are non-goals for ns-3.29 release, although they may be worked on for future releases.
1. provide build scripts so that each module can be built, tested, and installed as a completely standalone library without invoking ns-3's Waf, although this will not be precluded if a user wishes to provide some build scripts to do so.
2. provide build scripts to build the module Doxygen separately from the rest of ns-3.
3. support modules that require patching of the mainline ns-3 release to function.
ns-allinone-3.29 release tarball will contain all modules (the universe) supported for ns-3.29 and found in the app store. However, the default build of ns-3.29 will exclude the contributed modules.
# will exclude contrib modules: $ ./waf configure --enable-examples --enable-tests # will include sample-module in the usual way: $ ./waf configure --enable-examples --enable-tests --enable-modules=core,network,lte,sample-module # Will include all src and contrib modules meeting dependency requirements: $ ./waf configure --enable-examples --enable-tests --enable-modules=all