Difference between revisions of "HOWTO use ns-3 in the ORBIT testbed environment"

From Nsnam
Jump to: navigation, search
Line 98: Line 98:
 
will be in the process of booting.  You now need to connect to the individual  
 
will be in the process of booting.  You now need to connect to the individual  
 
nodes in the sandbox and configure them.  You may find it convenient to open
 
nodes in the sandbox and configure them.  You may find it convenient to open
a couple of terminal windows for this process.  You may see a route not found error
+
a couple of terminal windows for this process.  I will assume you do this, and in
until the nodes are actually done rebooting as a result of the power on step (1.d)  
+
from now on, when I refer to [x,y] I mean the terminal window into which you you
above.  Note that we configure "ath0" on node [1,1] to be an access point, and  
+
connect to the ORBIT node of array position [x,y].
"ath0" on node [1,2] to be a station.  We have to place the cards in promiscuous
+
 
mode for the emu net device to work.
+
You may see a "route not found" error, when you try to ssh, until the nodes are  
 +
actually up (done rebooting as a result of the power on step 1.d).  Note that we
 +
configure "ath0" on node [1,1] to be an access point, and "ath0" on node [1,2] to
 +
be a station.  We have to place the cards in promiscuous mode for the emu net  
 +
device to work.
  
 
2.  Connect to node [1,1] and configure its wireless
 
2.  Connect to node [1,1] and configure its wireless
Line 140: Line 144:
  
 
This is annoying, but for now we have got to manually set the hardware address
 
This is annoying, but for now we have got to manually set the hardware address
of the interfaces in the ns-3 simulation script. I am looking into how to make
+
of the interfaces in the ns-3 simulation script.
this easier, but for now the solution is brute force and awkwardness
+
  
 
8.  Set the hardware address of the interface in the server script on node [1,1]
 
8.  Set the hardware address of the interface in the server script on node [1,1]
Line 205: Line 208:
  
 
You can now look at the trace files on the client [1,2] and server [1,1] nodes
 
You can now look at the trace files on the client [1,2] and server [1,1] nodes
and see what you've sent.  For example, to look at the pcap traces on the client
+
and see what you've done.  For example, to look at the pcap traces on the client
 
node:
 
node:
  

Revision as of 21:26, 31 December 2008

Main Page - Current Development - Developer FAQ - Tools - Related Projects - Project Ideas - Summer Projects

Installation - Troubleshooting - User FAQ - HOWTOs - Samples - Models - Education - Contributed Code - Papers

We provide a realtime emulation package that allows us to connect ns-3 to real networks on real machines. Typically the real network will be a testbed of some kind. ORBIT is a two-tier laboratory emulator/field trial network project of WINLAB (Wireless Information Network Laboratory), at Rutgers. This wireless network emulator provides a large two-dimensional grid of 400 802.11 radio nodes as well as a number of smaller "sandbox" testbeds to allow one to test without reserving the main grid. This HOWTO shows how ns-3 scripts can be used to drive these radio nodes.

HOWTO use ns-3 in the ORBIT testbed environment

We assume that you have some experience with the ORBIT system. If you are new to ORBIT, please take a look at http://www.orbit-lab.org/ and go through the "Basic Tutorial" and the "Tutorials on controlling the testbed nodes" at a minimum. We will assume throughout this HOWTO that you have registered for an ORBIT account and have made a reservation on the ORBIT Scheduler for a testbed. This HOWTO assumes that you are on the sandbox one (sb1) testbed.

We provide a node image on the ORBIT system that includes everything you need to get an ns-3 environment up and running on your testbed nodes. This includes the GNU toolchain, a copy of a precompiled ns-3.3 repository, emacs editor, etc. The first step is to get this environment up on the nodes in your testbed. In ORBIT terminology, we need to "image the nodes."

1. Connect to the sandbox console, image the sandbox nodes and power them up

   a.  ssh your-orbit-user-name@console.sb1.orbit-lab.org;
   b.  orbit load all ns-3.3.ndz

This is a somewhat time-consuming process since you are actually copying disk images to the sandbox nodes. You should see status messages appearing which indicate that the imaging process is proceeding as expected:

       Imaging nodes: 'system:topo:all' with image 'ns-3.3.ndz'
       (Domain:  default from hostname)
       (Timeout:  800 sec.)
       INFO init: NodeHandler Version 4.2.0 (1272)
       INFO init: Experiment ID: sb1_2008_12_30_21_25_31
       INFO Experiment: load system:exp:stdlib
       INFO prop.resetDelay: resetDelay = 210:Fixnum
       INFO prop.resetTries: resetTries = 1:Fixnum
       INFO Experiment: load system:exp:imageNode
       INFO prop.nodes: nodes = "system:topo:all":String
       INFO prop.image: image = "ns-3.3.ndz":String
       INFO prop.pxe: pxe = "1.2.1-omf":String
       INFO prop.domain: domain = nil:NilClass
       INFO prop.timeout: timeout = 800:Fixnum
       INFO Topology: Loading topology 'system:topo:all'.
       INFO stdlib: Waiting for nodes (Up/Down/Total): 0/2/2 - (still down: n_1_2,n_1_1)
       ...
       INFO whenAll: *: 'status[@value='UP']' fires
       INFO exp: Progress(0/0/2): 0/0/0 min(n_1_2)/avg/max (91) - Timeout: 700 sec.
       ...
       INFO exp: Progress(2/0/2): 100/100/100 min()/avg/max (91) - Timeout: 358 sec.
       INFO exp:  -----------------------------
       INFO exp:  Imaging Process Done
       INFO exp:  - 2 node(s) succesfully imaged - See the topology file: 'system_topo_active_sb1.rb'
       INFO exp:  -----------------------------
       INFO Experiment: DONE!
       INFO ExecApp: Application 'commServer' finished
       INFO run: Experiment sb1_2008_12_30_21_25_31 finished after 7:28

You can now take a look at the status of the nodes. Observe that they are in the POWEROFF state

   c.  orbit stat
       -----------------------------------------------
        INFO Topology: Loading topology 'system:topo:all'.
        Testbed : sb1
        Node n_1_1 - State: POWEROFF
        Node n_1_2 - State: POWEROFF
       -----------------------------------------------

You can now power up the nodes in the sandbox

   d.  orbit tell on all
        INFO Topology: Loading topology 'system:topo:all'.
       ---------------------------------------------------
        Testbed : sb1 - Command: on
        Node n_1_2 - Ok
        Node n_1_1 - Ok
       ---------------------------------------------------

and see that the nodes are now powered up

   e.  orbit stat
       -----------------------------------------------
        INFO Topology: Loading topology 'system:topo:all'.
        Testbed : sb1
        Node n_1_1 - State: POWERON
        Node n_1_2 - State: POWERON
       -----------------------------------------------

When you are done with this step, the sandbox nodes will have been powered up and will be in the process of booting. You now need to connect to the individual nodes in the sandbox and configure them. You may find it convenient to open a couple of terminal windows for this process. I will assume you do this, and in from now on, when I refer to [x,y] I mean the terminal window into which you you connect to the ORBIT node of array position [x,y].

You may see a "route not found" error, when you try to ssh, until the nodes are actually up (done rebooting as a result of the power on step 1.d). Note that we configure "ath0" on node [1,1] to be an access point, and "ath0" on node [1,2] to be a station. We have to place the cards in promiscuous mode for the emu net device to work.

2. Connect to node [1,1] and configure its wireless

   a.  ssh root@node1-1
   b.  wlanconfig ath0 destroy
   c.  wlanconfig ath0 create wlandev wifi0 wlanmode ap
   d.  ifconfig ath0 promisc up

3. Connect to node [1,2] and configure its wireless

   a.  ssh root@node1-2
   b.  wlanconfig ath0 destroy
   c.  wlanconfig ath0 create wlandev wifi0 wlanmode sta
   d.  ifconfig ath0 promisc up

Now that you have a working hardware configuration, you can go ahead and get ns-3 up and running. The image you loaded is of a vanilla ns-3.3 distribution. In that distro there are no example programs handy which can drive the two nodes in the sandbox. We provide a couple of example progams on one of our developers' private repositories to get you started.

6. Pull the examples into [1,1] and build them

   a.  cd /home/repos/ns-3.3
   b.  hg pull http://code.nsnam.org/craigdo/ns-3.3-orbit
   c.  hg update
   d.  ./waf

7. Pull the examples into [1,2] and build them

   a.  cd /home/repos/ns-3.3
   b.  hg pull http://code.nsnam.org/craigdo/ns-3.3-orbit
   c.  hg update
   d.  ./waf

Now you can run the example ns-3 client server scripts on the testbed. We have configured [1,1] device "ath0" as an access point, and [1,2] device "ath0" as a station. Both devices must be in promiscuous mode. This can all be verified by using "ifconfig" and "iwconfig" on the appropriate console.

This is annoying, but for now we have got to manually set the hardware address of the interfaces in the ns-3 simulation script.

8. Set the hardware address of the interface in the server script on node [1,1]

   a. ifconfig

Locate the output for the device ath0 in the output of ifconfig

       ath0      Link encap:Ethernet  HWaddr 06:60:b3:ac:2b:f5
                 inet6 addr: fe80::460:b3ff:feac:2bf5/64 Scope:Link
                 UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
                 RX packets:1728 errors:0 dropped:0 overruns:0 frame:0
                 TX packets:42 errors:0 dropped:0 overruns:0 carrier:0
                 collisions:0 txqueuelen:0
                 RX bytes:1769806 (1.6 MiB)  TX bytes:2216 (2.1 KiB)

Copy the HWaddr to the clipboard.

   b.  cd examples
   c.  emacs emu-udp-echo-server.cc     # or use your favorite editor

Search for the MAC address assigmnet and replace the string with the HWaddr you just found, for example,

       ed->SetAddress ("06:60:b3:ac:2b:f5");

9. Set the hardware address of the interface in the client script on node [1,2]

   a. ifconfig

Locate the output for the device ath0 in the output of ifconfig

       ath0      Link encap:Ethernet  HWaddr 06:60:b3:b0:c6:a4
                 inet6 addr: fe80::460:b3ff:feb0:c6a4/64 Scope:Link
                 UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
                 RX packets:72 errors:0 dropped:0 overruns:0 frame:0
                 TX packets:851 errors:0 dropped:0 overruns:0 carrier:0
                 collisions:0 txqueuelen:0
                 RX bytes:1900 (1.8 KiB)  TX bytes:890770 (869.8 KiB)

Copy the HWaddr to the clipboard.

   b.  cd examples
   c.  emacs emu-udp-echo-client.cc     # or use your favorite editor

Search for the MAC address assigmnet and replace the string with the HWaddr you just found, for example,

         ed->SetAddress ("06:60:b3:b0:c6:a4");

In this simple example, we are just going to manually start one ns-3 simulation script to act as a server for a trivial UDP echo application. Once the server is started on [1,1] for example, you can then go to the console for [1,2] and run the UPD echo client script. Let's do it. Remember you don't have all day to dawdle after running the server -- it exits automatically after 60 seconds.

9. Run the server on [1,1]

   a.  ./waf --run emu-udp-echo-server

10. Run the client on [1,2]

   a.  ./waf --run emu-udp-echo-client

Congratulations, you have now run your ns-3 simulation scripts on a testbed. That was exciting, wasn't it.

You can now look at the trace files on the client [1,2] and server [1,1] nodes and see what you've done. For example, to look at the pcap traces on the client node:

11. Display the pcap trace on [1,2]

   a. cd ..
   b. tcpdump -nn -tt -r emu-udp-echo-client-0-0.pcap  | more

Bonus HOWTO better integrate ns-3 with ORBIT

There are a number of ways that ns-3 could be further integrated with the ORBIT system. Patches are always welcome.

1. Use the ORBIT NodeHandler to drive your experiments: http://www.orbit-lab.org/wiki/Tutorial/HowToCommand

The ORBIT NodeHandler allows you to send shell commands to the various nodes in your experiment. You can use this facility to automate the steps you did manually in the HOWTO above.

2. Support the Orbit Measurement Library (OML): http://www.orbit-lab.org/wiki/Documentation/OML

Using OML, you need to write an XML description of the data you want to collect and compile it. You then get C code that you can link into your ns-3 script that will write your measurement data to the ORBIT database. This could be hooked into the ns-3 tracing framework. See http://www.orbit-lab.org/wiki/Tutorial/CollectingMeasurements

3. Athstats: http://www.orbit-lab.org/wiki/Documentation/Athstats

This is at its lowest level, a Linux program to query the device drivers on the nodes. You can use an ORBIT application to cause this information to be pulled out and stored in the ORBIT OML database during ns-3 driven experiments.

   frames transmitted successfully (at senders) 
   frames dropped due to excessive retries (at senders) 
   frames dropped due to FIFO errors (at senders) 
   frames dropped due to filtering (at senders) 
   short retries (for 802.11 RTS frames) (at senders) 
   long retries (for 802.11 DATA/MGMT frames) (at senders) 
   frames received successfully (at receivers) 
   frames dropped due to CRC errors (at receivers) 
   frames dropped due to FIFO errors (at receivers) 
   frames dropped due to PHY errors (at receivers) 

4. Use Aruba Sniffers http://www.orbit-lab.org/wiki/Documentation/ARuba

The ORBIT main grid has four Aruba sniffers at the four corners that can be configured to sniff specific channels and report every sniffed packet to the database. This gives the experimenters an independent framework to correlate 802.11 traffic during the course of the experiment for sanity checking as well as verifying the expected outcome of the experiment.

5. Write an ORBIT-specific net device

Right now we can control the power using the usual Linux tools. For example

 iwconfig ath0 txpower 30mW

There is a further level of integration with ORBIT available which would require another (ORBIT-specific) device to be written. The ORBIT folks have written a user-space library (libnet + libpcap + API) to allow you to write Ethernet packets, read full 802.11 frames, and get and set interface parameters. See http://www.orbit-lab.org/wiki/Documentation/Libmac

A new net device that uses libmac calls could integrate with the ns-3 Attribute System to allow control of the underlying ORBIT node hardware by the ns-3 script directly.


Craigdo 20:56, 31 December 2008 (UTC)