wifi-vht-network.cc File Reference

#include "ns3/attribute-container.h"
#include "ns3/boolean.h"
#include "ns3/command-line.h"
#include "ns3/config.h"
#include "ns3/double.h"
#include "ns3/internet-stack-helper.h"
#include "ns3/ipv4-address-helper.h"
#include "ns3/ipv4-global-routing-helper.h"
#include "ns3/log.h"
#include "ns3/mobility-helper.h"
#include "ns3/multi-model-spectrum-channel.h"
#include "ns3/neighbor-cache-helper.h"
#include "ns3/on-off-helper.h"
#include "ns3/packet-sink-helper.h"
#include "ns3/packet-sink.h"
#include "ns3/spectrum-wifi-helper.h"
#include "ns3/ssid.h"
#include "ns3/string.h"
#include "ns3/udp-client-server-helper.h"
#include "ns3/udp-server.h"
#include "ns3/uinteger.h"
#include "ns3/vht-phy.h"
#include "ns3/wifi-static-setup-helper.h"
#include "ns3/yans-wifi-channel.h"
#include "ns3/yans-wifi-helper.h"
#include <algorithm>
#include <vector>

Include dependency graph for wifi-vht-network.cc:

Go to the source code of this file.

Detailed Description

Usage

$ ./ns3 run "wifi-vht-network [Program Options]"

Program Options

--staticSetup

Whether devices are configured using the static setup helper [true]

--distance

Distance in meters between the station and the access point [1]

--simulationTime

Simulation time [+10s]

--udp

UDP if set to 1, TCP otherwise [true]

--useRts

Enable/disable RTS/CTS [false]

--use80Plus80

Enable/disable use of 80+80 MHz [false]

--mcs

list of comma separated MCS values to test; if unset, all MCS values (0-9) are tested

--phyModel

PHY model to use (Yans or Spectrum). If 80+80 MHz is enabled, then Spectrum is automatically selected [Yans]

--channelWidth

if set, limit testing to a specific channel width expressed in MHz (20, 40, 80 or 160 MHz) [-1]

--guardInterval

if set, limit testing to a specific guard interval duration expressed in nanoseconds (800 or 400 ns) [-1]

--minExpectedThroughput

if set, simulation fails if the lowest throughput is below this value [0]

--maxExpectedThroughput

if set, simulation fails if the highest throughput is above this value [0]

Definition in file wifi-vht-network.cc.