See IEEE 802.11 chapter 7.3.1.11 Header format: | category: 1 | action value: 1 |. More...

#include "mgt-action-headers.h"

Inheritance diagram for ns3::WifiActionHeader:

Collaboration diagram for ns3::WifiActionHeader:

Classes
union	ActionValue
	typedef for union of different ActionValues More...

Public Types
enum	BlockAckActionValue : uint8_t { BLOCK_ACK_ADDBA_REQUEST = 0 , BLOCK_ACK_ADDBA_RESPONSE = 1 , BLOCK_ACK_DELBA = 2 }
	Block Ack Action field values See 802.11 Table 8-202. More...

enum	CategoryValue : uint8_t { SPECTRUM_MANAGEMENT = 0 , QOS = 1 , BLOCK_ACK = 3 , PUBLIC = 4 , RADIO_MEASUREMENT = 5 , MESH = 13 , MULTIHOP = 14 , SELF_PROTECTED = 15 , DMG = 16 , FST = 18 , UNPROTECTED_DMG = 20 , PROTECTED_EHT = 37 , VENDOR_SPECIFIC_ACTION = 127 }
	CategoryValue enumeration. More...

enum	DmgActionValue : uint8_t { DMG_POWER_SAVE_CONFIGURATION_REQUEST = 0 , DMG_POWER_SAVE_CONFIGURATION_RESPONSE = 1 , DMG_INFORMATION_REQUEST = 2 , DMG_INFORMATION_RESPONSE = 3 , DMG_HANDOVER_REQUEST = 4 , DMG_HANDOVER_RESPONSE = 5 , DMG_DTP_REQUEST = 6 , DMG_DTP_RESPONSE = 7 , DMG_RELAY_SEARCH_REQUEST = 8 , DMG_RELAY_SEARCH_RESPONSE = 9 , DMG_MULTI_RELAY_CHANNEL_MEASUREMENT_REQUEST = 10 , DMG_MULTI_RELAY_CHANNEL_MEASUREMENT_REPORT = 11 , DMG_RLS_REQUEST = 12 , DMG_RLS_RESPONSE = 13 , DMG_RLS_ANNOUNCEMENT = 14 , DMG_RLS_TEARDOWN = 15 , DMG_RELAY_ACK_REQUEST = 16 , DMG_RELAY_ACK_RESPONSE = 17 , DMG_TPA_REQUEST = 18 , DMG_TPA_RESPONSE = 19 , DMG_TPA_REPORT = 20 , DMG_ROC_REQUEST = 21 , DMG_ROC_RESPONSE = 22 }
	DMG Action field values See 802.11ad Table 8-281b. More...

enum	FstActionValue : uint8_t { FST_SETUP_REQUEST = 0 , FST_SETUP_RESPONSE = 1 , FST_TEAR_DOWN = 2 , FST_ACK_REQUEST = 3 , FST_ACK_RESPONSE = 4 , ON_CHANNEL_TUNNEL_REQUEST = 5 }
	FST Action field values See 802.11ad Table 8-281x. More...

enum	MeshActionValue : uint8_t { LINK_METRIC_REPORT = 0 , PATH_SELECTION = 1 , PORTAL_ANNOUNCEMENT = 2 , CONGESTION_CONTROL_NOTIFICATION = 3 , MDA_SETUP_REQUEST , MDA_SETUP_REPLY , MDAOP_ADVERTISEMENT_REQUEST , MDAOP_ADVERTISEMENTS = 7 , MDAOP_SET_TEARDOWN = 8 , TBTT_ADJUSTMENT_REQUEST = 9 , TBTT_ADJUSTMENT_RESPONSE = 10 }
	MeshActionValue enumeration. More...

enum	MultihopActionValue : uint8_t { PROXY_UPDATE = 0 , PROXY_UPDATE_CONFIRMATION = 1 }
	MultihopActionValue enumeration. More...

enum	ProtectedEhtActionValue : uint8_t { PROTECTED_EHT_TID_TO_LINK_MAPPING_REQUEST = 0 , PROTECTED_EHT_TID_TO_LINK_MAPPING_RESPONSE = 1 , PROTECTED_EHT_TID_TO_LINK_MAPPING_TEARDOWN = 2 , PROTECTED_EHT_EPCS_PRIORITY_ACCESS_ENABLE_REQUEST = 3 , PROTECTED_EHT_EPCS_PRIORITY_ACCESS_ENABLE_RESPONSE = 4 , PROTECTED_EHT_EPCS_PRIORITY_ACCESS_TEARDOWN = 5 , PROTECTED_EHT_EML_OPERATING_MODE_NOTIFICATION = 6 , PROTECTED_EHT_LINK_RECOMMENDATION = 7 , PROTECTED_EHT_MULTI_LINK_OPERATION_UPDATE_REQUEST = 8 , PROTECTED_EHT_MULTI_LINK_OPERATION_UPDATE_RESPONSE = 9 }
	Protected EHT action field values See 802.11be D3.0 Table 9-623c. More...

enum	PublicActionValue : uint8_t { QAB_REQUEST = 16 , QAB_RESPONSE = 17 }
	PublicActionValue enumeration. More...

enum	QosActionValue : uint8_t { ADDTS_REQUEST = 0 , ADDTS_RESPONSE = 1 , DELTS = 2 , SCHEDULE = 3 , QOS_MAP_CONFIGURE = 4 }
	QosActionValue enumeration. More...

enum	RadioMeasurementActionValue : uint8_t { RADIO_MEASUREMENT_REQUEST = 0 , RADIO_MEASUREMENT_REPORT = 1 , LINK_MEASUREMENT_REQUEST = 2 , LINK_MEASUREMENT_REPORT = 3 , NEIGHBOR_REPORT_REQUEST = 4 , NEIGHBOR_REPORT_RESPONSE = 5 }
	RadioMeasurementActionValue enumeration. More...

enum	SelfProtectedActionValue : uint8_t { PEER_LINK_OPEN = 1 , PEER_LINK_CONFIRM = 2 , PEER_LINK_CLOSE = 3 , GROUP_KEY_INFORM = 4 , GROUP_KEY_ACK = 5 }
	SelfProtectedActionValue enumeration. More...

enum	UnprotectedDmgActionValue : uint8_t { UNPROTECTED_DMG_ANNOUNCE = 0 , UNPROTECTED_DMG_BRP = 1 , UNPROTECTED_MIMO_BF_SETUP = 2 , UNPROTECTED_MIMO_BF_POLL = 3 , UNPROTECTED_MIMO_BF_FEEDBACK = 4 , UNPROTECTED_MIMO_BF_SELECTION = 5 }
	Unprotected DMG action field values See 802.11ad Table 8-281ae. More...

Public Member Functions
	WifiActionHeader ()

	~WifiActionHeader () override

uint32_t	Deserialize (Buffer::Iterator start) override

ActionValue	GetAction () const
	Return the action value.

CategoryValue	GetCategory () const
	Return the category value.

TypeId	GetInstanceTypeId () const override
	Get the most derived TypeId for this Object.

uint32_t	GetSerializedSize () const override

void	Print (std::ostream &os) const override

void	Serialize (Buffer::Iterator start) const override

void	SetAction (CategoryValue type, ActionValue action)
	Set action for this Action header.

Public Member Functions inherited from ns3::Header
	~Header () override

uint32_t	Deserialize (Buffer::Iterator start) override=0

virtual uint32_t	Deserialize (Buffer::Iterator start)=0
	Deserialize the object from a buffer iterator.

virtual uint32_t	Deserialize (Buffer::Iterator start, Buffer::Iterator end)
	Deserialize the object from a buffer iterator.

virtual uint32_t	GetSerializedSize () const =0

void	Print (std::ostream &os) const override=0

virtual void	Serialize (Buffer::Iterator start) const =0

virtual uint32_t	Deserialize (Buffer::Iterator start)=0
	Deserialize the object from a buffer iterator.

virtual uint32_t	Deserialize (Buffer::Iterator start, Buffer::Iterator end)
	Deserialize the object from a buffer iterator.

virtual void	Print (std::ostream &os) const =0
	Print the object contents.

Public Member Functions inherited from ns3::ObjectBase
virtual	~ObjectBase ()
	Virtual destructor.

void	GetAttribute (std::string name, AttributeValue &value) const
	Get the value of an attribute, raising fatal errors if unsuccessful.

bool	GetAttributeFailSafe (std::string name, AttributeValue &value) const
	Get the value of an attribute without raising errors.

virtual TypeId	GetInstanceTypeId () const =0
	Get the most derived TypeId for this Object.

void	SetAttribute (std::string name, const AttributeValue &value)
	Set a single attribute, raising fatal errors if unsuccessful.

bool	SetAttributeFailSafe (std::string name, const AttributeValue &value)
	Set a single attribute without raising errors.

bool	TraceConnect (std::string name, std::string context, const CallbackBase &cb)
	Connect a TraceSource to a Callback with a context.

bool	TraceConnectWithoutContext (std::string name, const CallbackBase &cb)
	Connect a TraceSource to a Callback without a context.

bool	TraceDisconnect (std::string name, std::string context, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected with a context.

bool	TraceDisconnectWithoutContext (std::string name, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected without a context.

Static Public Member Functions
static TypeId	GetTypeId ()
	Register this type.

static std::pair< CategoryValue, ActionValue >	Peek (Ptr< const Packet > pkt)
	Peek an Action header from the given packet.

static std::pair< CategoryValue, ActionValue >	Remove (Ptr< Packet > pkt)
	Remove an Action header from the given packet.

Static Public Member Functions inherited from ns3::Header
static TypeId	GetTypeId ()
	Get the type ID.

Static Public Member Functions inherited from ns3::Chunk
static TypeId	GetTypeId ()
	Get the type ID.

Static Public Member Functions inherited from ns3::ObjectBase
static TypeId	GetTypeId ()
	Get the type ID.

Private Attributes
uint8_t	m_actionValue
	Action value.

uint8_t	m_category
	Category of the action.

Additional Inherited Members
Protected Member Functions inherited from ns3::ObjectBase
void	ConstructSelf (const AttributeConstructionList &attributes)
	Complete construction of ObjectBase; invoked by derived classes.

virtual void	NotifyConstructionCompleted ()
	Notifier called once the ObjectBase is fully constructed.

Related Functions inherited from ns3::ObjectBase
static TypeId	GetObjectIid ()
	Ensure the TypeId for ObjectBase gets fully configured to anchor the inheritance tree properly.

Detailed Description

See IEEE 802.11 chapter 7.3.1.11 Header format: | category: 1 | action value: 1 |.

Definition at line 44 of file mgt-action-headers.h.

Member Enumeration Documentation

◆ BlockAckActionValue

enum ns3::WifiActionHeader::BlockAckActionValue : uint8_t

Block Ack Action field values See 802.11 Table 8-202.

Enumerator
BLOCK_ACK_ADDBA_REQUEST
BLOCK_ACK_ADDBA_RESPONSE
BLOCK_ACK_DELBA

Definition at line 90 of file mgt-action-headers.h.

◆ CategoryValue

enum ns3::WifiActionHeader::CategoryValue : uint8_t

CategoryValue enumeration.

Enumerator
SPECTRUM_MANAGEMENT
QOS
BLOCK_ACK
PUBLIC
RADIO_MEASUREMENT
MESH
MULTIHOP
SELF_PROTECTED
DMG
FST
UNPROTECTED_DMG
PROTECTED_EHT
VENDOR_SPECIFIC_ACTION

Definition at line 56 of file mgt-action-headers.h.

◆ DmgActionValue

enum ns3::WifiActionHeader::DmgActionValue : uint8_t

DMG Action field values See 802.11ad Table 8-281b.

Enumerator
DMG_POWER_SAVE_CONFIGURATION_REQUEST
DMG_POWER_SAVE_CONFIGURATION_RESPONSE
DMG_INFORMATION_REQUEST
DMG_INFORMATION_RESPONSE
DMG_HANDOVER_REQUEST
DMG_HANDOVER_RESPONSE
DMG_DTP_REQUEST
DMG_DTP_RESPONSE
DMG_RELAY_SEARCH_REQUEST
DMG_RELAY_SEARCH_RESPONSE
DMG_MULTI_RELAY_CHANNEL_MEASUREMENT_REQUEST
DMG_MULTI_RELAY_CHANNEL_MEASUREMENT_REPORT
DMG_RLS_REQUEST
DMG_RLS_RESPONSE
DMG_RLS_ANNOUNCEMENT
DMG_RLS_TEARDOWN
DMG_RELAY_ACK_REQUEST
DMG_RELAY_ACK_RESPONSE
DMG_TPA_REQUEST
DMG_TPA_RESPONSE
DMG_TPA_REPORT
DMG_ROC_REQUEST
DMG_ROC_RESPONSE

Definition at line 155 of file mgt-action-headers.h.

◆ FstActionValue

enum ns3::WifiActionHeader::FstActionValue : uint8_t

FST Action field values See 802.11ad Table 8-281x.

Enumerator
FST_SETUP_REQUEST
FST_SETUP_RESPONSE
FST_TEAR_DOWN
FST_ACK_REQUEST
FST_ACK_RESPONSE
ON_CHANNEL_TUNNEL_REQUEST

Definition at line 186 of file mgt-action-headers.h.

◆ MeshActionValue

enum ns3::WifiActionHeader::MeshActionValue : uint8_t

MeshActionValue enumeration.

Enumerator
LINK_METRIC_REPORT
PATH_SELECTION
PORTAL_ANNOUNCEMENT
CONGESTION_CONTROL_NOTIFICATION
MDA_SETUP_REQUEST
MDA_SETUP_REPLY
MDAOP_ADVERTISEMENT_REQUEST
MDAOP_ADVERTISEMENTS
MDAOP_SET_TEARDOWN
TBTT_ADJUSTMENT_REQUEST
TBTT_ADJUSTMENT_RESPONSE

Definition at line 116 of file mgt-action-headers.h.

◆ MultihopActionValue

enum ns3::WifiActionHeader::MultihopActionValue : uint8_t

MultihopActionValue enumeration.

Enumerator
PROXY_UPDATE
PROXY_UPDATE_CONFIRMATION

Definition at line 135 of file mgt-action-headers.h.

◆ ProtectedEhtActionValue

enum ns3::WifiActionHeader::ProtectedEhtActionValue : uint8_t

Protected EHT action field values See 802.11be D3.0 Table 9-623c.

Enumerator
PROTECTED_EHT_TID_TO_LINK_MAPPING_REQUEST
PROTECTED_EHT_TID_TO_LINK_MAPPING_RESPONSE
PROTECTED_EHT_TID_TO_LINK_MAPPING_TEARDOWN
PROTECTED_EHT_EPCS_PRIORITY_ACCESS_ENABLE_REQUEST
PROTECTED_EHT_EPCS_PRIORITY_ACCESS_ENABLE_RESPONSE
PROTECTED_EHT_EPCS_PRIORITY_ACCESS_TEARDOWN
PROTECTED_EHT_EML_OPERATING_MODE_NOTIFICATION
PROTECTED_EHT_LINK_RECOMMENDATION
PROTECTED_EHT_MULTI_LINK_OPERATION_UPDATE_REQUEST
PROTECTED_EHT_MULTI_LINK_OPERATION_UPDATE_RESPONSE

Definition at line 214 of file mgt-action-headers.h.

◆ PublicActionValue

enum ns3::WifiActionHeader::PublicActionValue : uint8_t

PublicActionValue enumeration.

Enumerator
QAB_REQUEST
QAB_RESPONSE

Definition at line 98 of file mgt-action-headers.h.

◆ QosActionValue

enum ns3::WifiActionHeader::QosActionValue : uint8_t

QosActionValue enumeration.

Enumerator
ADDTS_REQUEST
ADDTS_RESPONSE
DELTS
SCHEDULE
QOS_MAP_CONFIGURE

Definition at line 77 of file mgt-action-headers.h.

◆ RadioMeasurementActionValue

enum ns3::WifiActionHeader::RadioMeasurementActionValue : uint8_t

RadioMeasurementActionValue enumeration.

Enumerator
RADIO_MEASUREMENT_REQUEST
RADIO_MEASUREMENT_REPORT
LINK_MEASUREMENT_REQUEST
LINK_MEASUREMENT_REPORT
NEIGHBOR_REPORT_REQUEST
NEIGHBOR_REPORT_RESPONSE

Definition at line 105 of file mgt-action-headers.h.

◆ SelfProtectedActionValue

enum ns3::WifiActionHeader::SelfProtectedActionValue : uint8_t

SelfProtectedActionValue enumeration.

Enumerator
PEER_LINK_OPEN
PEER_LINK_CONFIRM
PEER_LINK_CLOSE
GROUP_KEY_INFORM
GROUP_KEY_ACK

Definition at line 142 of file mgt-action-headers.h.

◆ UnprotectedDmgActionValue

enum ns3::WifiActionHeader::UnprotectedDmgActionValue : uint8_t

Unprotected DMG action field values See 802.11ad Table 8-281ae.

Enumerator
UNPROTECTED_DMG_ANNOUNCE
UNPROTECTED_DMG_BRP
UNPROTECTED_MIMO_BF_SETUP
UNPROTECTED_MIMO_BF_POLL
UNPROTECTED_MIMO_BF_FEEDBACK
UNPROTECTED_MIMO_BF_SELECTION

Definition at line 200 of file mgt-action-headers.h.

Constructor & Destructor Documentation

◆ WifiActionHeader()

ns3::WifiActionHeader::WifiActionHeader ( )

Definition at line 32 of file mgt-action-headers.cc.

◆ ~WifiActionHeader()

ns3::WifiActionHeader::~WifiActionHeader ( )

override

Definition at line 36 of file mgt-action-headers.cc.

Member Function Documentation

◆ Deserialize()

uint32_t ns3::WifiActionHeader::Deserialize ( Buffer::Iterator start )

overridevirtual

Parameters

start an iterator which points to where the header should read from.

Returns: the number of bytes read.

This method is used by Packet::RemoveHeader to re-create a header from the byte buffer of a packet. The data read is expected to match bit-for-bit the representation of this header in real networks.

Note that data is not actually removed from the buffer to which the iterator points. Both Packet::RemoveHeader() and Packet::PeekHeader() call Deserialize(), but only the RemoveHeader() has additional statements to remove the header bytes from the underlying buffer and associated metadata.

Implements ns3::Header.

Definition at line 715 of file mgt-action-headers.cc.

References ns3::Buffer::Iterator::GetDistanceFrom(), m_actionValue, m_category, and ns3::Buffer::Iterator::ReadU8().

Here is the call graph for this function:

◆ GetAction()

WifiActionHeader::ActionValue ns3::WifiActionHeader::GetAction ( ) const

Return the action value.

Returns: ActionValue

Definition at line 136 of file mgt-action-headers.cc.

Referenced by ns3::GetTid(), ns3::HtFrameExchangeManager::NotifyPacketDiscarded(), ns3::HtFrameExchangeManager::NotifyReceivedNormalAck(), Peek(), ns3::WifiMac::Receive(), ns3::dot11s::PeerManagementProtocolMac::Receive(), and Remove().

Here is the caller graph for this function:

◆ GetCategory()

WifiActionHeader::CategoryValue ns3::WifiActionHeader::GetCategory ( ) const

Return the category value.

Returns: CategoryValue

Definition at line 101 of file mgt-action-headers.cc.

References BLOCK_ACK, DMG, FST, m_category, MESH, MULTIHOP, NS_FATAL_ERROR, PROTECTED_EHT, PUBLIC, QOS, RADIO_MEASUREMENT, SELF_PROTECTED, UNPROTECTED_DMG, and VENDOR_SPECIFIC_ACTION.

Referenced by ns3::GetTid(), ns3::HtFrameExchangeManager::NotifyPacketDiscarded(), ns3::HtFrameExchangeManager::NotifyReceivedNormalAck(), Peek(), ns3::WifiMac::Receive(), ns3::dot11s::PeerManagementProtocolMac::Receive(), ns3::dot11s::HwmpProtocolMac::ReceiveAction(), Remove(), and ns3::dot11s::PeerManagementProtocolMac::UpdateOutcomingFrame().

Here is the caller graph for this function:

◆ GetInstanceTypeId()

TypeId ns3::WifiActionHeader::GetInstanceTypeId ( ) const

overridevirtual

Get the most derived TypeId for this Object.

This method is typically implemented by ns3::Object::GetInstanceTypeId but some classes which derive from ns3::ObjectBase directly have to implement it themselves.

Returns: The TypeId associated to the most-derived type of this instance.

Implements ns3::ObjectBase.

Definition at line 495 of file mgt-action-headers.cc.

References GetTypeId().

Here is the call graph for this function:

◆ GetSerializedSize()

uint32_t ns3::WifiActionHeader::GetSerializedSize ( ) const

overridevirtual

Returns: the expected size of the header.

This method is used by Packet::AddHeader to store a header into the byte buffer of a packet. This method should return the number of bytes which are needed to store the full header data by Serialize.

Implements ns3::Header.

Definition at line 702 of file mgt-action-headers.cc.

◆ GetTypeId()

TypeId ns3::WifiActionHeader::GetTypeId ( )

static

Register this type.

Returns: The TypeId.

Definition at line 485 of file mgt-action-headers.cc.

References ns3::TypeId::SetParent().

Referenced by GetInstanceTypeId().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ Peek()

std::pair< WifiActionHeader::CategoryValue, WifiActionHeader::ActionValue > ns3::WifiActionHeader::Peek ( Ptr< const Packet > pkt )

static

Peek an Action header from the given packet.

Parameters

pkt	the given packet

Returns: the category value and the action value in the peeked Action header

Definition at line 501 of file mgt-action-headers.cc.

References GetAction(), and GetCategory().

Referenced by ns3::EmlsrManager::NotifyMgtFrameReceived(), ns3::StaWifiMac::Receive(), EmlOmnExchangeTest::Transmit(), EmlsrDlTxopTest::Transmit(), EmlsrLinkSwitchTest::Transmit(), EmlOmnExchangeTest::TxDropped(), ns3::ApWifiMac::TxOk(), and EmlOmnExchangeTest::TxOk().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ Print()

void ns3::WifiActionHeader::Print ( std::ostream & os ) const

overridevirtual

Parameters

os output stream This method is used by Packet::Print to print the content of a header as ascii data to a c++ output stream. Although the header is free to format its output as it wishes, it is recommended to follow a few rules to integrate with the packet pretty printer: start with flags, small field values located between a pair of parens. Values should be separated by whitespace. Follow the parens with the important fields, separated by whitespace. i.e.: (field1 val1 field2 val2 field3 val3) field4 val4 field5 val5

Implements ns3::Header.

Definition at line 517 of file mgt-action-headers.cc.

References ADDTS_REQUEST, ADDTS_RESPONSE, BLOCK_ACK, BLOCK_ACK_ADDBA_REQUEST, BLOCK_ACK_ADDBA_RESPONSE, BLOCK_ACK_DELBA, CASE_ACTION_VALUE, CONGESTION_CONTROL_NOTIFICATION, DELTS, DMG, DMG_DTP_REQUEST, DMG_DTP_RESPONSE, DMG_HANDOVER_REQUEST, DMG_HANDOVER_RESPONSE, DMG_INFORMATION_REQUEST, DMG_INFORMATION_RESPONSE, DMG_MULTI_RELAY_CHANNEL_MEASUREMENT_REPORT, DMG_MULTI_RELAY_CHANNEL_MEASUREMENT_REQUEST, DMG_POWER_SAVE_CONFIGURATION_REQUEST, DMG_POWER_SAVE_CONFIGURATION_RESPONSE, DMG_RELAY_ACK_REQUEST, DMG_RELAY_ACK_RESPONSE, DMG_RELAY_SEARCH_REQUEST, DMG_RELAY_SEARCH_RESPONSE, DMG_RLS_ANNOUNCEMENT, DMG_RLS_REQUEST, DMG_RLS_RESPONSE, DMG_RLS_TEARDOWN, DMG_ROC_REQUEST, DMG_ROC_RESPONSE, DMG_TPA_REQUEST, DMG_TPA_RESPONSE, FST, FST_ACK_REQUEST, FST_ACK_RESPONSE, FST_SETUP_REQUEST, FST_SETUP_RESPONSE, FST_TEAR_DOWN, GROUP_KEY_ACK, GROUP_KEY_INFORM, LINK_MEASUREMENT_REPORT, LINK_MEASUREMENT_REQUEST, LINK_METRIC_REPORT, m_actionValue, m_category, MDA_SETUP_REPLY, MDA_SETUP_REQUEST, MDAOP_ADVERTISEMENT_REQUEST, MDAOP_ADVERTISEMENTS, MDAOP_SET_TEARDOWN, MESH, MULTIHOP, NEIGHBOR_REPORT_REQUEST, NEIGHBOR_REPORT_RESPONSE, NS_FATAL_ERROR, ON_CHANNEL_TUNNEL_REQUEST, PATH_SELECTION, PEER_LINK_CLOSE, PEER_LINK_CONFIRM, PEER_LINK_OPEN, PORTAL_ANNOUNCEMENT, PROTECTED_EHT, PROTECTED_EHT_EML_OPERATING_MODE_NOTIFICATION, PROTECTED_EHT_EPCS_PRIORITY_ACCESS_ENABLE_REQUEST, PROTECTED_EHT_EPCS_PRIORITY_ACCESS_ENABLE_RESPONSE, PROTECTED_EHT_EPCS_PRIORITY_ACCESS_TEARDOWN, PROTECTED_EHT_LINK_RECOMMENDATION, PROTECTED_EHT_MULTI_LINK_OPERATION_UPDATE_REQUEST, PROTECTED_EHT_MULTI_LINK_OPERATION_UPDATE_RESPONSE, PROTECTED_EHT_TID_TO_LINK_MAPPING_REQUEST, PROTECTED_EHT_TID_TO_LINK_MAPPING_RESPONSE, PROTECTED_EHT_TID_TO_LINK_MAPPING_TEARDOWN, PROXY_UPDATE, PROXY_UPDATE_CONFIRMATION, PUBLIC, QAB_REQUEST, QAB_RESPONSE, QOS, QOS_MAP_CONFIGURE, RADIO_MEASUREMENT, RADIO_MEASUREMENT_REPORT, RADIO_MEASUREMENT_REQUEST, SCHEDULE, SELF_PROTECTED, TBTT_ADJUSTMENT_REQUEST, TBTT_ADJUSTMENT_RESPONSE, UNPROTECTED_DMG, UNPROTECTED_DMG_ANNOUNCE, UNPROTECTED_DMG_BRP, UNPROTECTED_MIMO_BF_FEEDBACK, UNPROTECTED_MIMO_BF_POLL, UNPROTECTED_MIMO_BF_SELECTION, UNPROTECTED_MIMO_BF_SETUP, and VENDOR_SPECIFIC_ACTION.

Referenced by EmlsrOperationsTestBase::Transmit().

Here is the caller graph for this function:

◆ Remove()

std::pair< WifiActionHeader::CategoryValue, WifiActionHeader::ActionValue > ns3::WifiActionHeader::Remove ( Ptr< Packet > pkt )

static

Remove an Action header from the given packet.

Parameters

pkt	the given packet

Returns: the category value and the action value in the removed Action header

Definition at line 509 of file mgt-action-headers.cc.

References GetAction(), and GetCategory().

Referenced by EmlOmnExchangeTest::CheckEmlNotification(), EmlsrDlTxopTest::CheckEmlNotificationFrame(), and ns3::ApWifiMac::Receive().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ Serialize()

void ns3::WifiActionHeader::Serialize ( Buffer::Iterator start ) const

overridevirtual

Parameters

start an iterator which points to where the header should be written.

This method is used by Packet::AddHeader to store a header into the byte buffer of a packet. The data written is expected to match bit-for-bit the representation of this header in a real network.

Implements ns3::Header.

Definition at line 708 of file mgt-action-headers.cc.

References m_actionValue, and m_category.

◆ SetAction()

void ns3::WifiActionHeader::SetAction	(	WifiActionHeader::CategoryValue	type,
		WifiActionHeader::ActionValue	action
	)

Set action for this Action header.

Parameters

type	category
action	action

Definition at line 41 of file mgt-action-headers.cc.

References BLOCK_ACK, DMG, FST, m_actionValue, m_category, MESH, MULTIHOP, PROTECTED_EHT, PUBLIC, QOS, RADIO_MEASUREMENT, SELF_PROTECTED, SPECTRUM_MANAGEMENT, UNPROTECTED_DMG, and VENDOR_SPECIFIC_ACTION.

Referenced by ns3::dot11s::HwmpProtocolMac::GetWifiActionHeader(), ns3::HtFrameExchangeManager::SendAddBaRequest(), ns3::HtFrameExchangeManager::SendAddBaResponse(), ns3::HtFrameExchangeManager::SendDelbaFrame(), ns3::EhtFrameExchangeManager::SendEmlOmn(), and ns3::dot11s::PeerManagementProtocolMac::SendPeerLinkManagementFrame().

Here is the caller graph for this function:

Member Data Documentation

◆ m_actionValue

uint8_t ns3::WifiActionHeader::m_actionValue

private

Action value.

Definition at line 295 of file mgt-action-headers.h.

Referenced by Deserialize(), GetAction(), Print(), Serialize(), and SetAction().

◆ m_category

uint8_t ns3::WifiActionHeader::m_category

private

Category of the action.

Definition at line 294 of file mgt-action-headers.h.

Referenced by Deserialize(), GetAction(), GetCategory(), Print(), Serialize(), and SetAction().

The documentation for this class was generated from the following files:

src/wifi/model/mgt-action-headers.h
src/wifi/model/mgt-action-headers.cc

Classes

Public Types

Public Member Functions

Static Public Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ BlockAckActionValue

◆ CategoryValue

◆ DmgActionValue

◆ FstActionValue

◆ MeshActionValue

◆ MultihopActionValue

◆ ProtectedEhtActionValue

◆ PublicActionValue

◆ QosActionValue

◆ RadioMeasurementActionValue

◆ SelfProtectedActionValue

◆ UnprotectedDmgActionValue

Constructor & Destructor Documentation

◆ WifiActionHeader()

◆ ~WifiActionHeader()

Member Function Documentation

◆ Deserialize()

◆ GetAction()

◆ GetCategory()

◆ GetInstanceTypeId()

◆ GetSerializedSize()

◆ GetTypeId()

◆ Peek()

◆ Print()

◆ Remove()

◆ Serialize()

◆ SetAction()

Member Data Documentation

◆ m_actionValue

◆ m_category