wifi-test-interference-helper.cc

Go to the documentation of this file.

/*
 * Copyright (c) 2015
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation;
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 * Author: Sébastien Deronne <sebastien.deronne@gmail.com>
 */
 
//
// This script is used to verify the behavior of InterferenceHelper.
//
// The scenario consists of two IEEE 802.11 hidden stations and an access point.
// The two stations have both a packet to transmit to the access point.
//
//
// (xA,0,0)     (0,0,0)      (xB,0,0)
//
//    *   ----->   *   <-----   *
//    |            |            |
//   STA A         AP          STA B
//
//
// The program can be configured at run-time by passing command-line arguments.
// It enables to configure the delay between the transmission from station A
// and the transmission from station B (--delay option). It is also possible to
// select the tx power level (--txPowerA and --txPowerB options), the packet size
// (--packetSizeA and --packetSizeB options) and the modulation (--txModeA and
// --txModeB options) used for the respective transmissions.
//
// By default, IEEE 802.11a with long preamble type is considered, but those
// parameters can be also picked among other IEEE 802.11 flavors and preamble
// types available in the simulator (--standard and --preamble options).
// Note that the program checks the consistency between the selected standard
// the selected preamble type.
//
// The output of the program displays InterfenceHelper and SpectrumWifiPhy trace
// logs associated to the chosen scenario.
//
 
#include "ns3/command-line.h"
#include "ns3/config.h"
#include "ns3/constant-position-mobility-model.h"
#include "ns3/double.h"
#include "ns3/interference-helper.h"
#include "ns3/log.h"
#include "ns3/nist-error-rate-model.h"
#include "ns3/node.h"
#include "ns3/packet.h"
#include "ns3/propagation-delay-model.h"
#include "ns3/propagation-loss-model.h"
#include "ns3/simple-frame-capture-model.h"
#include "ns3/simulator.h"
#include "ns3/single-model-spectrum-channel.h"
#include "ns3/spectrum-wifi-phy.h"
#include "ns3/wifi-mac-trailer.h"
#include "ns3/wifi-net-device.h"
#include "ns3/wifi-psdu.h"
 
using namespace ns3;
 
NS_LOG_COMPONENT_DEFINE("test-interference-helper");
 
bool checkResults = false;         
bool expectRxASuccessfull = false; 
bool expectRxBSuccessfull = false; 
 
class InterferenceExperiment
{
  public:
    struct Input
    {
        Input();
        Time interval;         
        double xA;             
        double xB;             
        std::string txModeA;   
        std::string txModeB;   
        double txPowerLevelA;  
        double txPowerLevelB;  
        uint32_t packetSizeA;  
        uint32_t packetSizeB;  
        uint16_t channelA;     
        uint16_t channelB;     
        uint16_t widthA;       
        uint16_t widthB;       
        WifiStandard standard; 
        WifiPhyBand band;      
        WifiPreamble preamble; 
        bool captureEnabled;   
        double captureMargin;  
    };
 
    InterferenceExperiment();
    void Run(struct InterferenceExperiment::Input input);
 
  private:
    void PacketDropped(Ptr<const Packet> packet, WifiPhyRxfailureReason reason);
    void SendA() const;
    void SendB() const;
    Ptr<SpectrumWifiPhy> m_txA; 
    Ptr<SpectrumWifiPhy> m_txB; 
    struct Input m_input;       
    bool m_droppedA;            
    bool m_droppedB;            
    mutable uint64_t m_uidA;    
    mutable uint64_t m_uidB;    
};
 
void
InterferenceExperiment::SendA() const
{
    WifiMacHeader hdr;
    hdr.SetType(WIFI_MAC_CTL_ACK); // so that size may not be empty while being as short as possible
    Ptr<Packet> p =
        Create<Packet>(m_input.packetSizeA - hdr.GetSerializedSize() - WIFI_MAC_FCS_LENGTH);
    m_uidA = p->GetUid();
    Ptr<WifiPsdu> psdu = Create<WifiPsdu>(p, hdr);
    WifiTxVector txVector;
    txVector.SetTxPowerLevel(0); // only one TX power level
    txVector.SetMode(WifiMode(m_input.txModeA));
    txVector.SetChannelWidth(m_input.widthA);
    txVector.SetPreambleType(m_input.preamble);
    m_txA->Send(psdu, txVector);
}
 
void
InterferenceExperiment::SendB() const
{
    WifiMacHeader hdr;
    hdr.SetType(WIFI_MAC_CTL_ACK); // so that size may not be empty while being as short as possible
    Ptr<Packet> p =
        Create<Packet>(m_input.packetSizeB - hdr.GetSerializedSize() - WIFI_MAC_FCS_LENGTH);
    m_uidB = p->GetUid();
    Ptr<WifiPsdu> psdu = Create<WifiPsdu>(p, hdr);
    WifiTxVector txVector;
    txVector.SetTxPowerLevel(0); // only one TX power level
    txVector.SetMode(WifiMode(m_input.txModeB));
    txVector.SetChannelWidth(m_input.widthB);
    txVector.SetPreambleType(m_input.preamble);
    m_txB->Send(psdu, txVector);
}
 
void
InterferenceExperiment::PacketDropped(Ptr<const Packet> packet, WifiPhyRxfailureReason reason)
{
    if (packet->GetUid() == m_uidA)
    {
        m_droppedA = true;
    }
    else if (packet->GetUid() == m_uidB)
    {
        m_droppedB = true;
    }
    else
    {
        NS_LOG_ERROR("Unknown packet!");
        exit(1);
    }
}
 
InterferenceExperiment::InterferenceExperiment()
    : m_droppedA(false),
      m_droppedB(false),
      m_uidA(0),
      m_uidB(0)
{
}
 
InterferenceExperiment::Input::Input()
    : interval(MicroSeconds(0)),
      xA(-5),
      xB(5),
      txModeA("OfdmRate54Mbps"),
      txModeB("OfdmRate54Mbps"),
      txPowerLevelA(16.0206),
      txPowerLevelB(16.0206),
      packetSizeA(1500),
      packetSizeB(1500),
      channelA(36),
      channelB(36),
      widthA(20),
      widthB(20),
      standard(WIFI_STANDARD_80211a),
      band(WIFI_PHY_BAND_5GHZ),
      preamble(WIFI_PREAMBLE_LONG),
      captureEnabled(false),
      captureMargin(0)
{
}
 
void
InterferenceExperiment::Run(struct InterferenceExperiment::Input input)
{
    m_input = input;
 
    double range = std::max(std::abs(input.xA), input.xB);
    Config::SetDefault("ns3::RangePropagationLossModel::MaxRange", DoubleValue(range));
 
    Ptr<SingleModelSpectrumChannel> channel = CreateObject<SingleModelSpectrumChannel>();
    channel->SetPropagationDelayModel(CreateObject<ConstantSpeedPropagationDelayModel>());
    Ptr<RangePropagationLossModel> loss = CreateObject<RangePropagationLossModel>();
    channel->AddPropagationLossModel(loss);
 
    Ptr<MobilityModel> posTxA = CreateObject<ConstantPositionMobilityModel>();
    posTxA->SetPosition(Vector(input.xA, 0.0, 0.0));
    Ptr<MobilityModel> posTxB = CreateObject<ConstantPositionMobilityModel>();
    posTxB->SetPosition(Vector(input.xB, 0.0, 0.0));
    Ptr<MobilityModel> posRx = CreateObject<ConstantPositionMobilityModel>();
    posRx->SetPosition(Vector(0.0, 0.0, 0.0));
 
    Ptr<Node> nodeA = CreateObject<Node>();
    Ptr<WifiNetDevice> devA = CreateObject<WifiNetDevice>();
    m_txA = CreateObject<SpectrumWifiPhy>();
    m_txA->CreateWifiSpectrumPhyInterface(devA);
    m_txA->SetDevice(devA);
    m_txA->SetTxPowerStart(input.txPowerLevelA);
    m_txA->SetTxPowerEnd(input.txPowerLevelA);
 
    Ptr<Node> nodeB = CreateObject<Node>();
    Ptr<WifiNetDevice> devB = CreateObject<WifiNetDevice>();
    m_txB = CreateObject<SpectrumWifiPhy>();
    m_txB->CreateWifiSpectrumPhyInterface(devB);
    m_txB->SetDevice(devB);
    m_txB->SetTxPowerStart(input.txPowerLevelB);
    m_txB->SetTxPowerEnd(input.txPowerLevelB);
 
    Ptr<Node> nodeRx = CreateObject<Node>();
    Ptr<WifiNetDevice> devRx = CreateObject<WifiNetDevice>();
    Ptr<SpectrumWifiPhy> rx = CreateObject<SpectrumWifiPhy>();
    rx->CreateWifiSpectrumPhyInterface(devRx);
    rx->SetDevice(devRx);
 
    Ptr<InterferenceHelper> interferenceTxA = CreateObject<InterferenceHelper>();
    m_txA->SetInterferenceHelper(interferenceTxA);
    Ptr<ErrorRateModel> errorTxA = CreateObject<NistErrorRateModel>();
    m_txA->SetErrorRateModel(errorTxA);
    Ptr<InterferenceHelper> interferenceTxB = CreateObject<InterferenceHelper>();
    m_txB->SetInterferenceHelper(interferenceTxB);
    Ptr<ErrorRateModel> errorTxB = CreateObject<NistErrorRateModel>();
    m_txB->SetErrorRateModel(errorTxB);
    Ptr<InterferenceHelper> interferenceRx = CreateObject<InterferenceHelper>();
    rx->SetInterferenceHelper(interferenceRx);
    Ptr<ErrorRateModel> errorRx = CreateObject<NistErrorRateModel>();
    rx->SetErrorRateModel(errorRx);
    m_txA->SetChannel(channel);
    m_txB->SetChannel(channel);
    rx->SetChannel(channel);
    m_txA->SetMobility(posTxA);
    m_txB->SetMobility(posTxB);
    rx->SetMobility(posRx);
    if (input.captureEnabled)
    {
        Ptr<SimpleFrameCaptureModel> frameCaptureModel = CreateObject<SimpleFrameCaptureModel>();
        frameCaptureModel->SetMargin(input.captureMargin);
        rx->SetFrameCaptureModel(frameCaptureModel);
    }
 
    m_txA->ConfigureStandard(input.standard);
    m_txB->ConfigureStandard(input.standard);
    rx->ConfigureStandard(input.standard);
 
    devA->SetPhy(m_txA);
    nodeA->AddDevice(devA);
    devB->SetPhy(m_txB);
    nodeB->AddDevice(devB);
    devRx->SetPhy(rx);
    nodeRx->AddDevice(devRx);
 
    m_txA->SetOperatingChannel(WifiPhy::ChannelTuple{input.channelA, 0, (int)(input.band), 0});
    m_txB->SetOperatingChannel(WifiPhy::ChannelTuple{input.channelB, 0, (int)(input.band), 0});
    rx->SetOperatingChannel(
        WifiPhy::ChannelTuple{std::max(input.channelA, input.channelB), 0, (int)(input.band), 0});
 
    rx->TraceConnectWithoutContext("PhyRxDrop",
                                   MakeCallback(&InterferenceExperiment::PacketDropped, this));
 
    Simulator::Schedule(Seconds(0), &InterferenceExperiment::SendA, this);
    Simulator::Schedule(Seconds(0) + input.interval, &InterferenceExperiment::SendB, this);
 
    Simulator::Run();
    Simulator::Destroy();
    m_txB->Dispose();
    m_txA->Dispose();
    rx->Dispose();
 
    if (checkResults && (m_droppedA == expectRxASuccessfull || m_droppedB == expectRxBSuccessfull))
    {
        NS_LOG_ERROR("Results are not expected!");
        exit(1);
    }
}
 
int
main(int argc, char* argv[])
{
    InterferenceExperiment::Input input;
    std::string str_standard = "WIFI_PHY_STANDARD_80211a";
    std::string str_preamble = "WIFI_PREAMBLE_LONG";
    uint64_t delay = 0; // microseconds
 
    CommandLine cmd(__FILE__);
    cmd.AddValue("delay",
                 "Delay in microseconds between frame transmission from sender A and frame "
                 "transmission from sender B",
                 delay);
    cmd.AddValue("xA", "The position of transmitter A (< 0)", input.xA);
    cmd.AddValue("xB", "The position of transmitter B (> 0)", input.xB);
    cmd.AddValue("packetSizeA", "Packet size in bytes of transmitter A", input.packetSizeA);
    cmd.AddValue("packetSizeB", "Packet size in bytes of transmitter B", input.packetSizeB);
    cmd.AddValue("txPowerA", "TX power level of transmitter A", input.txPowerLevelA);
    cmd.AddValue("txPowerB", "TX power level of transmitter B", input.txPowerLevelB);
    cmd.AddValue("txModeA", "Wifi mode used for payload transmission of sender A", input.txModeA);
    cmd.AddValue("txModeB", "Wifi mode used for payload transmission of sender B", input.txModeB);
    cmd.AddValue("channelA", "The selected channel number of sender A", input.channelA);
    cmd.AddValue("channelB", "The selected channel number of sender B", input.channelB);
    cmd.AddValue("widthA", "The selected channel width (MHz) of sender A", input.widthA);
    cmd.AddValue("widthB", "The selected channel width (MHz) of sender B", input.widthB);
    cmd.AddValue("standard", "IEEE 802.11 flavor", str_standard);
    cmd.AddValue("preamble", "Type of preamble", str_preamble);
    cmd.AddValue("enableCapture", "Enable/disable physical layer capture", input.captureEnabled);
    cmd.AddValue("captureMargin", "Margin used for physical layer capture", input.captureMargin);
    cmd.AddValue("checkResults", "Used to check results at the end of the test", checkResults);
    cmd.AddValue("expectRxASuccessfull",
                 "Indicate whether packet A is expected to be successfully received",
                 expectRxASuccessfull);
    cmd.AddValue("expectRxBSuccessfull",
                 "Indicate whether packet B is expected to be successfully received",
                 expectRxBSuccessfull);
    cmd.Parse(argc, argv);
 
    input.interval = MicroSeconds(delay);
 
    if (input.xA >= 0 || input.xB <= 0)
    {
        std::cout << "Value of xA must be smaller than 0 and value of xB must be bigger than 0!"
                  << std::endl;
        return 0;
    }
 
    if (str_standard == "WIFI_PHY_STANDARD_80211a")
    {
        input.standard = WIFI_STANDARD_80211a;
        input.band = WIFI_PHY_BAND_5GHZ;
    }
    else if (str_standard == "WIFI_PHY_STANDARD_80211b")
    {
        input.standard = WIFI_STANDARD_80211b;
        input.band = WIFI_PHY_BAND_2_4GHZ;
    }
    else if (str_standard == "WIFI_PHY_STANDARD_80211g")
    {
        input.standard = WIFI_STANDARD_80211g;
        input.band = WIFI_PHY_BAND_2_4GHZ;
    }
    else if (str_standard == "WIFI_PHY_STANDARD_80211n_2_4GHZ")
    {
        input.standard = WIFI_STANDARD_80211n;
        input.band = WIFI_PHY_BAND_2_4GHZ;
    }
    else if (str_standard == "WIFI_PHY_STANDARD_80211n_5GHZ")
    {
        input.standard = WIFI_STANDARD_80211n;
        input.band = WIFI_PHY_BAND_5GHZ;
    }
    else if (str_standard == "WIFI_PHY_STANDARD_80211ac")
    {
        input.standard = WIFI_STANDARD_80211ac;
        input.band = WIFI_PHY_BAND_5GHZ;
    }
    else if (str_standard == "WIFI_PHY_STANDARD_80211ax_2_4GHZ")
    {
        input.standard = WIFI_STANDARD_80211ax;
        input.band = WIFI_PHY_BAND_2_4GHZ;
    }
    else if (str_standard == "WIFI_PHY_STANDARD_80211ax_5GHZ")
    {
        input.standard = WIFI_STANDARD_80211ax;
        input.band = WIFI_PHY_BAND_5GHZ;
    }
 
    if (str_preamble == "WIFI_PREAMBLE_LONG" &&
        (input.standard == WIFI_STANDARD_80211a || input.standard == WIFI_STANDARD_80211b ||
         input.standard == WIFI_STANDARD_80211g))
    {
        input.preamble = WIFI_PREAMBLE_LONG;
    }
    else if (str_preamble == "WIFI_PREAMBLE_SHORT" &&
             (input.standard == WIFI_STANDARD_80211b || input.standard == WIFI_STANDARD_80211g))
    {
        input.preamble = WIFI_PREAMBLE_SHORT;
    }
    else if (str_preamble == "WIFI_PREAMBLE_HT_MF" && input.standard == WIFI_STANDARD_80211n)
    {
        input.preamble = WIFI_PREAMBLE_HT_MF;
    }
    else if (str_preamble == "WIFI_PREAMBLE_VHT_SU" && input.standard == WIFI_STANDARD_80211ac)
    {
        input.preamble = WIFI_PREAMBLE_VHT_SU;
    }
    else if (str_preamble == "WIFI_PREAMBLE_HE_SU" && input.standard == WIFI_STANDARD_80211ax)
    {
        input.preamble = WIFI_PREAMBLE_HE_SU;
    }
    else
    {
        std::cout << "Preamble does not exist or is not compatible with the selected standard!"
                  << std::endl;
        return 0;
    }
 
    InterferenceExperiment experiment;
    experiment.Run(input);
 
    return 0;
}