27 #include <ns3/object.h> 
   28 #include <ns3/spectrum-interference.h> 
   29 #include <ns3/spectrum-error-model.h> 
   32 #include <ns3/simulator.h> 
   33 #include <ns3/packet.h> 
   35 #include "ns3/radio-bearer-stats-calculator.h" 
   36 #include <ns3/constant-position-mobility-model.h> 
   38 #include <ns3/eps-bearer.h> 
   39 #include <ns3/node-container.h> 
   40 #include <ns3/mobility-helper.h> 
   41 #include <ns3/net-device-container.h> 
   42 #include <ns3/lte-ue-net-device.h> 
   43 #include <ns3/lte-enb-net-device.h> 
   44 #include <ns3/lte-ue-rrc.h> 
   45 #include <ns3/lte-helper.h> 
   46 #include "ns3/string.h" 
   47 #include "ns3/double.h" 
   48 #include <ns3/lte-enb-phy.h> 
   49 #include <ns3/lte-ue-phy.h> 
   50 #include <ns3/boolean.h> 
   61   : 
TestSuite (
"lte-fdmt-ff-mac-scheduler", SYSTEM)
 
   63   NS_LOG_INFO (
"creating LenaTestFdMtFfMacSchedulerSuite");
 
   65   bool errorModel = 
false;
 
  161   std::ostringstream oss;
 
  162   oss << nUser << 
" UEs, distance " << dist << 
" m";
 
  167   : 
TestCase (BuildNameString (nUser, dist)),
 
  170     m_thrRefDl (thrRefDl),
 
  171     m_thrRefUl (thrRefUl),
 
  172     m_errorModelEnabled (errorModelEnabled)
 
  226   lteHelper->
Attach (ueDevs, enbDevs.
Get (0));
 
  236   enbPhy->SetAttribute (
"TxPower", 
DoubleValue (30.0));
 
  237   enbPhy->SetAttribute (
"NoiseFigure", 
DoubleValue (5.0));
 
  240   for (
int i = 0; i < 
m_nUser; i++)
 
  246       uePhy->SetAttribute (
"TxPower", 
DoubleValue (23.0));
 
  247       uePhy->SetAttribute (
"NoiseFigure", 
DoubleValue (9.0));
 
  251   double statsStartTime = 0.300; 
 
  252   double statsDuration = 0.6;
 
  253   double tolerance = 0.1;
 
  254   Simulator::Stop (
Seconds (statsStartTime + statsDuration - 0.000001));
 
  269   std::vector <uint64_t> dlDataRxed;
 
  270   for (
int i = 0; i < 
m_nUser; i++)
 
  275       dlDataRxed.push_back (rlcStats->
GetDlRxData (imsi, lcId));
 
  276       NS_LOG_INFO (
"\tUser " << i << 
" imsi " << imsi << 
" bytes rxed " << (
double)dlDataRxed.at (i) << 
"  thr " << (double)dlDataRxed.at (i) / statsDuration << 
" ref " << 
m_thrRefDl);
 
  285   for (
int i = 0; i < 
m_nUser; i++)
 
  287       double throughput = (double)dlDataRxed.at (i) / statsDuration;
 
  288       if (throughput != 0 && found == 0)
 
  293       else if (throughput != 0 && found == 1)
 
  305   std::vector <uint64_t> ulDataRxed;
 
  306   for (
int i = 0; i < 
m_nUser; i++)
 
  312       ulDataRxed.push_back (rlcStats->
GetUlRxData (imsi, lcId));
 
  313       NS_LOG_INFO (
"\tUser " << i << 
" imsi " << imsi << 
" bytes rxed " << (
double)ulDataRxed.at (i) << 
"  thr " << (double)ulDataRxed.at (i) / statsDuration << 
" ref " << 
m_thrRefUl);
 
  321   for (
int i = 0; i < 
m_nUser; i++)
 
  325   Simulator::Destroy ();
 
#define NS_LOG_FUNCTION(parameters)
If log level LOG_FUNCTION is enabled, this macro will output all input parameters separated by "...
 
AttributeValue implementation for Boolean. 
 
NetDeviceContainer InstallEnbDevice(NodeContainer c)
Create a set of eNodeB devices. 
 
LenaFdMtFfMacSchedulerTestCase(uint16_t nUser, uint16_t dist, double thrRefDl, double thrRefUl, bool errorModelEnabled)
 
Ptr< T > GetObject(void) const 
Get a pointer to the requested aggregated Object. 
 
Hold variables of type string. 
 
Ptr< NetDevice > Get(uint32_t i) const 
Get the Ptr stored in this container at a given index. 
 
Ptr< LteEnbPhy > GetPhy(void) const 
 
Mobility model for which the current position does not change once it has been set and until it is se...
 
void Attach(NetDeviceContainer ueDevices)
Enables automatic attachment of a set of UE devices to a suitable cell using Idle mode initial cell s...
 
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name. 
 
void EnableRlcTraces(void)
Enable trace sinks for RLC layer. 
 
#define NS_LOG_INFO(msg)
Use NS_LOG to output a message of level LOG_INFO. 
 
void ActivateDataRadioBearer(NetDeviceContainer ueDevices, EpsBearer bearer)
Activate a Data Radio Bearer on a given UE devices (for LTE-only simulation). 
 
This system test program creates different test cases with a single eNB and several UEs...
 
void SetSchedulerType(std::string type)
Set the type of scheduler to be used by eNodeB devices. 
 
This class contains the specification of EPS Bearers. 
 
void Install(Ptr< Node > node) const 
"Layout" a single node according to the current position allocator type. 
 
void AddTestCase(TestCase *testCase, enum TestDuration duration)
Add an individual child TestCase to this test suite. 
 
AttributeValue implementation for Time. 
 
uint64_t GetDlRxData(uint64_t imsi, uint8_t lcid)
Gets the number of received downlink data bytes. 
 
holds a vector of ns3::NetDevice pointers 
 
virtual ~LenaFdMtFfMacSchedulerTestCase()
 
#define NS_TEST_ASSERT_MSG_EQ_TOL(actual, limit, tol, msg)
Test that actual and expected (limit) values are equal to plus or minus some tolerance and report and...
 
static std::string BuildNameString(uint16_t nUser, uint16_t dist)
 
Every class exported by the ns3 library is enclosed in the ns3 namespace. 
 
keep track of a set of node pointers. 
 
virtual void DoRun(void)
Implementation to actually run this TestCase. 
 
void SetMobilityModel(std::string type, std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue(), std::string n8="", const AttributeValue &v8=EmptyAttributeValue(), std::string n9="", const AttributeValue &v9=EmptyAttributeValue())
 
void SetPosition(const Vector &position)
 
Ptr< RadioBearerStatsCalculator > GetRlcStats(void)
 
NetDeviceContainer InstallUeDevice(NodeContainer c)
Create a set of UE devices. 
 
Helper class used to assign positions and mobility models to nodes. 
 
uint64_t GetUlRxData(uint64_t imsi, uint8_t lcid)
Gets the number of received uplink data bytes. 
 
static LenaTestFdMtFfMacSchedulerSuite lenaTestFdMtFfMacSchedulerSuite
 
Ptr< Node > Get(uint32_t i) const 
Get the Ptr stored in this container at a given index. 
 
Time Seconds(double value)
Construct a Time in the indicated unit. 
 
void SetDefault(std::string name, const AttributeValue &value)
 
LenaTestFdMtFfMacSchedulerSuite()
 
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer. 
 
void EnableMacTraces(void)
Enable trace sinks for MAC layer. 
 
Ptr< LteUePhy > GetPhy(void) const 
 
This class can be used to hold variables of floating point type such as 'double' or 'float'...
 
void SetAttribute(std::string name, const AttributeValue &value)
Set a single attribute, raising fatal errors if unsuccessful. 
 
The eNodeB device implementation. 
 
The LteUeNetDevice class implements the UE net device.