21 #ifndef HALF_DUPLEX_IDEAL_PHY_H 
   22 #define HALF_DUPLEX_IDEAL_PHY_H 
   25 #include <ns3/spectrum-value.h> 
   26 #include <ns3/mobility-model.h> 
   27 #include <ns3/packet.h> 
   28 #include <ns3/nstime.h> 
   29 #include <ns3/net-device.h> 
   30 #include <ns3/spectrum-phy.h> 
   31 #include <ns3/spectrum-channel.h> 
   32 #include <ns3/spectrum-interference.h> 
   33 #include <ns3/data-rate.h> 
   34 #include <ns3/generic-phy.h> 
   35 #include <ns3/event-id.h> 
   36 #include <ns3/spectrum-signal-parameters.h> 
void SetRate(DataRate rate)
set the PHY rate to be used by this PHY. 
void SetGenericPhyTxEndCallback(GenericPhyTxEndCallback c)
set the callback for the end of a TX, as part of the interconnections betweenthe PHY and the MAC ...
smart pointer class similar to boost::intrusive_ptr 
Ptr< MobilityModel > m_mobility
Abstract base class for Spectrum-aware PHY layers. 
bool StartTx(Ptr< Packet > p)
Start a transmission. 
forward calls to a chain of CallbackAn ns3::TracedCallback has almost exactly the same API as a norma...
void SetGenericPhyRxStartCallback(GenericPhyRxStartCallback c)
set the callback for the start of RX, as part of the interconnections betweenthe PHY and the MAC ...
SpectrumInterference m_interference
GenericPhyRxEndErrorCallback m_phyMacRxEndErrorCallback
Ptr< MobilityModel > GetMobility()
get the associated MobilityModel instance 
Ptr< const SpectrumValue > m_rxPsd
TracedCallback< Ptr< const Packet > > m_phyTxEndTrace
void StartRx(Ptr< SpectrumSignalParameters > params)
Notify the SpectrumPhy instance of an incoming signal. 
TracedCallback< Ptr< const Packet > > m_phyRxStartTrace
TracedCallback< Ptr< const Packet > > m_phyRxAbortTrace
Class for representing data rates. 
TracedCallback< Ptr< const Packet > > m_phyTxStartTrace
void SetDevice(Ptr< NetDevice > d)
set the associated NetDevice instance 
void SetAntenna(Ptr< AntennaModel > a)
set the AntennaModel to be used 
Ptr< SpectrumValue > m_txPsd
void SetGenericPhyRxEndOkCallback(GenericPhyRxEndOkCallback c)
set the callback for the successful end of a RX, as part of the interconnections betweenthe PHY and t...
virtual ~HalfDuplexIdealPhy()
GenericPhyRxEndOkCallback m_phyMacRxEndOkCallback
virtual void DoDispose(void)
This method is called by Object::Dispose or by the object's destructor, whichever comes first...
Ptr< AntennaModel > GetRxAntenna()
get the AntennaModel used by the NetDevice for reception 
Ptr< SpectrumChannel > m_channel
This PHY layer implementation realizes an ideal OFDM PHY which transmits half-duplex (i...
void SetNoisePowerSpectralDensity(Ptr< const SpectrumValue > noisePsd)
Ptr< NetDevice > GetDevice()
get the associated NetDevice instance 
void ChangeState(State newState)
This class implements a gaussian interference model, i.e., all incoming signals are added to the tota...
Ptr< NetDevice > m_netDevice
void SetGenericPhyRxEndErrorCallback(GenericPhyRxEndErrorCallback c)
set the callback for the end of a RX in error, as part of the interconnections betweenthe PHY and the...
Ptr< AntennaModel > m_antenna
an identifier for simulation events. 
TracedCallback< Ptr< const Packet > > m_phyRxEndErrorTrace
GenericPhyRxStartCallback m_phyMacRxStartCallback
static TypeId GetTypeId(void)
void SetChannel(Ptr< SpectrumChannel > c)
Set the channel attached to this device. 
TracedCallback< Ptr< const Packet > > m_phyRxEndOkTrace
void SetMobility(Ptr< MobilityModel > m)
Set the mobility model associated with this device. 
GenericPhyTxEndCallback m_phyMacTxEndCallback
void SetTxPowerSpectralDensity(Ptr< SpectrumValue > txPsd)
set the Power Spectral Density of outgoing signals in power units (Watt, Pascal...) per Hz. 
a unique identifier for an interface. 
Ptr< const SpectrumModel > GetRxSpectrumModel() const