LTE Models

Collaboration diagram for LTE Models:

Modules
	FF MAC Schedulers

Classes
class	ns3::BsrLteControlMessage
	The uplink BsrLteControlMessage defines the specific extension of the CE element for reporting the buffer status report. More...
class	ns3::DlCqiLteControlMessage
	The downlink CqiLteControlMessage defines an ideal list of feedback about the channel quality sent by the UE to the eNodeB. More...
class	ns3::DlDciLteControlMessage
	The Downlink Data Control Indicator messages defines the RB allocation for the users in the downlink. More...
class	ns3::DlHarqFeedbackLteControlMessage
	The downlink DlHarqFeedbackLteControlMessage defines the specific messages for transmitting the DL HARQ feedback through PUCCH. More...
class	ns3::EpcEnbApplication
	This application is installed inside eNBs and provides the bridge functionality for user data plane packets between the radio interface and the S1-U interface. More...
class	ns3::EpcS11SapMme
	MME side of the S11 Service Access Point (SAP), provides the MME methods to be called when an S11 message is received by the MME. More...
class	ns3::EpcS11SapSgw
	SGW side of the S11 Service Access Point (SAP), provides the SGW methods to be called when an S11 message is received by the SGW. More...
class	ns3::EpcS1apSapEnb
	eNB side of the S1-AP Service Access Point (SAP), provides the eNB methods to be called when an S1-AP message is received by the eNB. More...
class	ns3::EpcS1apSapMme
	MME side of the S1-AP Service Access Point (SAP), provides the MME methods to be called when an S1-AP message is received by the MME. More...
class	ns3::EpcSgwPgwApplication
	This application implements the SGW/PGW functionality. More...
class	ns3::EpcX2
	This entity is installed inside an eNB and provides the functionality for the X2 interface. More...
class	ns3::GtpuHeader
	Implementation of the GTPv1-U Release 10 as per 3Gpp TS 29.281 document. More...
class	ns3::LteAmc
	The LteAmc class implements the Adaptive Modulation And Coding Scheme as proposed in 3GPP TSG-RAN WG1 - R1-081483 http://www.3gpp.org/ftp/tsg_ran/WG1_RL1/TSGR1_52b/Docs/R1-081483.zip. More...
class	ns3::LteControlMessage
	The LteControlMessage provides a basic implementations for control messages (such as PDCCH allocation map, CQI feedbacks) that are exchanged among eNodeB and UEs. More...
class	ns3::LteEnbNetDevice
	The eNodeB device implementation. More...
class	ns3::LteEnbPhy
	LteEnbPhy models the physical layer for the eNodeB. More...
class	ns3::LteEnbRrc
	The LTE Radio Resource Control entity at the eNB. More...
class	ns3::LteHarqPhy
	The LteHarqPhy class implements the HARQ functionalities related to PHY layer (i.e., decodification buffers for incremental redundancy managment) More...
class	ns3::LteHelper
	Creation and configuration of LTE entities. More...
class	ns3::LteNetDevice
	LteNetDevice provides basic implementation for all LTE network devices. More...
class	ns3::LtePdcpHeader
	The packet header for the Packet Data Convergence Protocol (PDCP) packets. More...
class	ns3::LtePhy
	The LtePhy models the physical layer of LTE. More...
class	ns3::LteRlcAmHeader
	The packet header for the AM Radio Link Control (RLC) protocol packets. More...
class	ns3::LteRlcHeader
	The packet header for the Radio Link Control (RLC) protocol packets. More...
class	ns3::LteRrcSap
	Class holding definition common to all UE/eNodeB SAP Users/Providers. More...
class	ns3::LteSimpleNetDevice
	The LteSimpleNetDevice class implements the LTE simple net device. More...
class	ns3::LteSimpleSpectrumPhy
	The LteSimpleSpectrumPhy models the physical layer of LTE This class is used to test Frequency Reuse Algorithms, it allow to get SpectrumValue from channel and pass it to test script by trace mechanism. More...
class	ns3::LteSpectrumPhy
	The LteSpectrumPhy models the physical layer of LTE. More...
struct	ns3::LteSpectrumSignalParameters
	Signal parameters for Lte. More...
struct	ns3::LteSpectrumSignalParametersDataFrame
	Signal parameters for Lte Data Frame (PDSCH), and eventually after some control messages through other control channel embedded in PDSCH (i.e. More...
struct	ns3::LteSpectrumSignalParametersDlCtrlFrame
	Signal parameters for Lte DL Ctrl Frame (RS, PCFICH and PDCCH) More...
struct	ns3::LteSpectrumSignalParametersUlSrsFrame
	Signal parameters for Lte SRS Frame. More...
class	ns3::LteSpectrumValueHelper
	This class defines all functions to create spectrum model for lte. More...
class	ns3::LteUeNetDevice
	The LteUeNetDevice class implements the UE net device. More...
class	ns3::LteUePhy
	The LteSpectrumPhy models the physical layer of LTE. More...
class	ns3::MibLteControlMessage
	Abstract model for broadcasting the Master Information Block (MIB) within the control channel (BCCH). More...
class	ns3::RachPreambleLteControlMessage
	abstract model for the Random Access Preamble More...
class	ns3::RarLteControlMessage
	abstract model for the MAC Random Access Response message More...
class	ns3::Sib1LteControlMessage
	Abstract model for broadcasting the System Information Block Type 1 (SIB1) within the control channel (BCCH). More...
class	ns3::TraceFadingLossModel
	fading loss model based on precalculated fading traces More...
class	ns3::UlDciLteControlMessage
	The Uplink Data Control Indicator messages defines the RB allocation for the users in the uplink. More...

Detailed Description