23 #include "ns3/simulator.h"
26 #include "ns3/lte-helper.h"
27 #include "ns3/point-to-point-epc-helper.h"
28 #include "ns3/packet-sink-helper.h"
29 #include "ns3/udp-client-server-helper.h"
30 #include "ns3/udp-echo-helper.h"
31 #include "ns3/point-to-point-helper.h"
32 #include "ns3/internet-stack-helper.h"
33 #include "ns3/ipv4-address-helper.h"
34 #include "ns3/inet-socket-address.h"
35 #include "ns3/packet-sink.h"
36 #include <ns3/ipv4-static-routing-helper.h>
37 #include <ns3/ipv4-static-routing.h>
38 #include "ns3/boolean.h"
39 #include "ns3/uinteger.h"
40 #include "ns3/double.h"
41 #include "ns3/abort.h"
42 #include "ns3/mobility-helper.h"
70 interPacketInterval (
Seconds (i))
81 std::vector<UeTestData>
ues;
92 virtual void DoRun (
void);
124 epcHelper->SetAttribute (
"S1uLinkMtu",
UintegerValue (30000));
126 Ptr<Node> pgw = epcHelper->GetPgwNode ();
130 remoteHostContainer.
Create (1);
133 internet.
Install (remoteHostContainer);
142 ipv4h.
SetBase (
"1.0.0.0",
"255.0.0.0");
169 uint16_t ulPort = 1000;
171 for (std::vector<EnbTestData>::iterator enbit =
m_enbTestData.begin ();
173 ++enbit, ++enbLteDevIt)
180 ues.
Create (enbit->ues.size ());
196 for (uint32_t u = 0; u < ues.GetN (); ++u)
204 ueStaticRouting->
SetDefaultRoute (epcHelper->GetUeDefaultGatewayAddress (), 1);
208 lteHelper->
Attach (ueLteDevice, *enbLteDevIt);
211 uint16_t dlPort = 2000;
212 for (uint32_t b = 0; b < enbit->ues.at (u).bearers.size (); ++b)
214 BearerTestData& bearerTestData = enbit->ues.at (u).bearers.at (b);
227 apps = client.Install (remoteHost);
243 apps = client.Install (ue);
248 EpsBearer epsBearer (EpsBearer::NGBR_VOICE_VIDEO_GAMING);
253 dlpf.localPortEnd = dlPort;
267 Config::Set (
"/NodeList/*/DeviceList/*/LteEnbRrc/UeMap/*/RadioBearerMap/*/LteRlc/MaxTxBufferSize",
269 Config::Set (
"/NodeList/*/DeviceList/*/LteUeRrc/RadioBearerMap/*/LteRlc/MaxTxBufferSize",
273 double statsStartTime = 0.040;
274 double statsDuration = 2.0;
282 Simulator::Stop (
Seconds (statsStartTime + statsDuration - 0.0001));
285 uint64_t imsiCounter = 0;
287 for (std::vector<EnbTestData>::iterator enbit =
m_enbTestData.begin ();
291 for (std::vector<UeTestData>::iterator ueit = enbit->ues.begin ();
292 ueit < enbit->ues.end ();
295 uint64_t imsi = ++imsiCounter;
296 for (uint32_t b = 0; b < ueit->bearers.size (); ++b)
301 uint32_t expectedPkts = ueit->bearers.at (b).numPkts;
302 uint32_t expectedBytes = (ueit->bearers.at (b).numPkts) * (ueit->bearers.at (b).pktSize);
303 uint32_t txPktsPdcpDl = lteHelper->
GetPdcpStats ()->GetDlTxPackets (imsi, lcid);
304 uint32_t rxPktsPdcpDl = lteHelper->
GetPdcpStats ()->GetDlRxPackets (imsi, lcid);
305 uint32_t txPktsPdcpUl = lteHelper->
GetPdcpStats ()->GetUlTxPackets (imsi, lcid);
306 uint32_t rxPktsPdcpUl = lteHelper->
GetPdcpStats ()->GetUlRxPackets (imsi, lcid);
307 uint32_t rxBytesDl = ueit->bearers.at (b).dlServerApp->GetTotalRx ();
308 uint32_t rxBytesUl = ueit->bearers.at (b).ulServerApp->GetTotalRx ();
313 "wrong TX PDCP packets in downlink for IMSI=" << imsi <<
" LCID=" << (uint16_t) lcid);
317 "wrong RX PDCP packets in downlink for IMSI=" << imsi <<
" LCID=" << (uint16_t) lcid);
320 "wrong TX PDCP packets in uplink for IMSI=" << imsi <<
" LCID=" << (uint16_t) lcid);
323 "wrong RX PDCP packets in uplink for IMSI=" << imsi <<
" LCID=" << (uint16_t) lcid);
327 "wrong total received bytes in downlink");
330 "wrong total received bytes in uplink");
335 Simulator::Destroy ();
355 std::vector<EnbTestData> v1;
360 e1.
ues.push_back (u1);
364 std::vector<EnbTestData> v2;
369 e2.
ues.push_back (u2_1);
373 e2.
ues.push_back (u2_2);
377 std::vector<EnbTestData> v3;
386 e4.
ues.push_back (u4_1);
390 e4.
ues.push_back (u4_2);
394 e4.
ues.push_back (u4_3);
395 std::vector<EnbTestData> v4;
405 e5.
ues.push_back (u5);
406 std::vector<EnbTestData> v5;
415 e6.
ues.push_back (u6);
416 std::vector<EnbTestData> v6;
426 e7.
ues.push_back (u7);
427 std::vector<EnbTestData> v7;
435 e8.
ues.push_back (u8);
436 std::vector<EnbTestData> v8;
445 e9.
ues.push_back (u9);
446 std::vector<EnbTestData> v9;
holds a vector of ns3::Application pointers.
Iterator Begin(void) const
Get an iterator which refers to the first NetDevice in the container.
uint8_t Add(PacketFilter f)
add a PacketFilter to the Traffic Flow Template
Simulation virtual time values and global simulation resolution.
#define NS_LOG_FUNCTION(parameters)
If log level LOG_FUNCTION is enabled, this macro will output all input parameters separated by "...
AttributeValue implementation for Boolean.
Test that the S1-U interface implementation works correctly.
NetDeviceContainer InstallEnbDevice(NodeContainer c)
Create a set of eNodeB devices.
holds a vector of std::pair of Ptr and interface index.
void SetDefaultRoute(Ipv4Address nextHop, uint32_t interface, uint32_t metric=0)
Add a default route to the static routing table.
Hold variables of type string.
Ptr< NetDevice > Get(uint32_t i) const
Get the Ptr stored in this container at a given index.
void Set(std::string path, const AttributeValue &value)
NetDeviceContainer Install(NodeContainer c)
a class to represent an Ipv4 address mask
static Vector GetPosition(Ptr< Node > node)
Create an application which sends a UDP packet and waits for an echo of this packet.
void Attach(NetDeviceContainer ueDevices)
Enables automatic attachment of a set of UE devices to a suitable cell using Idle mode initial cell s...
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name.
aggregate IP/TCP/UDP functionality to existing Nodes.
std::vector< EnbTestData > m_enbTestData
A helper to make it easier to instantiate an ns3::PacketSinkApplication on a set of nodes...
Build a set of PointToPointNetDevice objects.
virtual void DoRun(void)
Implementation to actually run this TestCase.
void SetDeviceAttribute(std::string name, const AttributeValue &value)
Set an attribute value to be propagated to each NetDevice created by the helper.
uint8_t ActivateDedicatedEpsBearer(NetDeviceContainer ueDevices, EpsBearer bearer, Ptr< EpcTft > tft)
Activate a dedicated EPS bearer on a given set of UE devices.
Class for representing data rates.
void EnablePdcpTraces(void)
Enable trace sinks for PDCP layer.
Keep track of the current position and velocity of an object.
This class contains the specification of EPS Bearers.
void Install(Ptr< Node > node) const
"Layout" a single node according to the current position allocator type.
void AddTestCase(TestCase *testCase, enum TestDuration duration)
Add an individual child TestCase to this test suite.
AttributeValue implementation for Time.
Hold an unsigned integer type.
#define NS_TEST_ASSERT_MSG_EQ(actual, limit, msg)
Test that an actual and expected (limit) value are equal and report and abort if not.
holds a vector of ns3::NetDevice pointers
Ptr< Application > ulClientApp
std::vector< BearerTestData > bearers
virtual ~LteEpcE2eDataTestCase()
void Start(Time start)
Arrange for all of the Applications in this container to Start() at the Time given as a parameter...
std::vector< UeTestData > ues
Ptr< PacketSink > ulServerApp
Access to the Ipv4 forwarding table, interfaces, and configuration.
uint16_t remotePortEnd
end of the port number range of the remote host
LteEpcE2eDataTestSuite g_lteEpcE2eDataTestSuite
Every class exported by the ns3 library is enclosed in the ns3 namespace.
keep track of a set of node pointers.
Ptr< Application > Get(uint32_t i) const
Get the Ptr
stored in this container at a given index.
Ptr< Application > dlClientApp
LteEpcE2eDataTestCase(std::string name, std::vector< EnbTestData > v)
void SetMobilityModel(std::string type, std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue(), std::string n8="", const AttributeValue &v8=EmptyAttributeValue(), std::string n9="", const AttributeValue &v9=EmptyAttributeValue())
void Install(std::string nodeName) const
Aggregate implementations of the ns3::Ipv4, ns3::Ipv6, ns3::Udp, and ns3::Tcp classes onto the provid...
void Reset(void)
Reset the initial value of every attribute as well as the value of every global to what they were bef...
void SetChannelAttribute(std::string name, const AttributeValue &value)
Set an attribute value to be propagated to each Channel created by the helper.
NetDeviceContainer InstallUeDevice(NodeContainer c)
Create a set of UE devices.
Ptr< RadioBearerStatsCalculator > GetPdcpStats(void)
Helper class used to assign positions and mobility models to nodes.
void AddNetworkRouteTo(Ipv4Address network, Ipv4Mask networkMask, Ipv4Address nextHop, uint32_t interface, uint32_t metric=0)
Add a network route to the static routing table.
#define NS_ABORT_IF(cond)
Abnormal program termination if a condition is true.
Ipv4 addresses are stored in host order in this class.
Ipv4InterfaceContainer Assign(const NetDeviceContainer &c)
Assign IP addresses to the net devices specified in the container based on the current network prefix...
Ptr< Ipv4StaticRouting > GetStaticRouting(Ptr< Ipv4 > ipv4) const
Try and find the static routing protocol as either the main routing protocol or in the list of routin...
void SetEpcHelper(Ptr< EpcHelper > h)
Set the EpcHelper to be used to setup the EPC network in conjunction with the setup of the LTE radio ...
Helper class that adds ns3::Ipv4StaticRouting objects.
AttributeValue implementation for DataRate.
Ptr< Node > Get(uint32_t i) const
Get the Ptr stored in this container at a given index.
std::vector< Ptr< NetDevice > >::const_iterator Iterator
NetDevice container iterator.
Time Seconds(double value)
Construct a Time in the indicated unit.
void SetDefault(std::string name, const AttributeValue &value)
Ptr< PacketSink > dlServerApp
ApplicationContainer Install(NodeContainer c) const
Install an ns3::PacketSinkApplication on each node of the input container configured with all the att...
std::string GetName(void) const
A helper class to make life easier while doing simple IPv4 address assignment in scripts.
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer.
void SetAttribute(std::string name, const AttributeValue &value)
Record an attribute to be set in each Application after it is is created.
Receive and consume traffic generated to an IP address and port.
void SetPositionAllocator(Ptr< PositionAllocator > allocator)
Set the position allocator which will be used to allocate the initial position of every node initiali...
Iterator End(void) const
Get an iterator which indicates past-the-last NetDevice in the container.
This class can be used to hold variables of floating point type such as 'double' or 'float'...
void SetAttribute(std::string name, const AttributeValue &value)
Set a single attribute, raising fatal errors if unsuccessful.
Ptr< T > GetObject(void) const
Get a pointer to the requested aggregated Object.
BearerTestData(uint32_t n, uint32_t s, double i)
uint16_t remotePortStart
start of the port number range of the remote host
void SetBase(Ipv4Address network, Ipv4Mask mask, Ipv4Address base="0.0.0.1")
Set the base network number, network mask and base address.
Implement the data structure representing a TrafficFlowTemplate Packet Filter.
Ipv4Address GetAddress(uint32_t i, uint32_t j=0) const
uint16_t localPortStart
start of the port number range of the UE