The VanetRoutingExperiment class implements a wifi app that allows VANET routing experiments to be simulated. More...

Inheritance diagram for VanetRoutingExperiment:

Collaboration diagram for VanetRoutingExperiment:

Public Member Functions
	VanetRoutingExperiment ()
	Constructor. More...

Public Member Functions inherited from WifiApp
	WifiApp ()
	Constructor. More...

virtual	~WifiApp ()
	Destructor. More...

void	Simulate (int argc, char **argv)
	Enacts simulation of an ns-3 wifi application. More...

Protected Member Functions
virtual void	ConfigureApplications ()
	Configure applications. More...

virtual void	ConfigureChannels ()
	Configure channels. More...

virtual void	ConfigureDevices ()
	Configure devices. More...

virtual void	ConfigureMobility ()
	Configure mobility. More...

virtual void	ConfigureNodes ()
	Configure nodes. More...

virtual void	ConfigureTracing ()
	Configure tracing. More...

virtual void	ParseCommandLineArguments (int argc, char **argv)
	Process command line arguments. More...

virtual void	ProcessOutputs ()
	Process outputs. More...

virtual void	RunSimulation ()
	Run the simulation. More...

virtual void	SetDefaultAttributeValues ()
	Sets default attribute values. More...

Private Member Functions
void	CheckThroughput ()
	Checks the throughput and outputs summary to CSV file1. More...

void	CommandSetup (int argc, char **argv)
	Run the simulation. More...

void	ConfigureDefaults ()
	Configure default attributes. More...

void	Run ()
	Run the simulation. More...

void	SetConfigFromGlobals ()
	Set up configuration parameter from the global variables. More...

void	SetGlobalsFromConfig ()
	Set up the global variables from the configuration parameters. More...

void	SetupAdhocDevices ()
	Set up the adhoc devices. More...

void	SetupAdhocMobilityNodes ()
	Set up the adhoc mobility nodes. More...

void	SetupLogFile ()
	Set up log file. More...

void	SetupLogging ()
	Set up logging. More...

void	SetupRoutingMessages ()
	Set up generation of packets to be routed through the vehicular network. More...

void	SetupScenario ()
	Set up a prescribed scenario. More...

void	SetupWaveMessages ()
	Set up generation of IEEE 1609 WAVE messages, as a Basic Safety Message (BSM). More...

void	WriteCsvHeader ()
	Write the header line to the CSV file1. More...

Static Private Member Functions
static void	CourseChange (std::ostream *os, std::string context, Ptr< const MobilityModel > mobility)
	Course change function. More...

Private Attributes
uint32_t	m_80211mode
	80211 mode More...

NetDeviceContainer	m_adhocTxDevices
	adhoc transmit devices More...

Ipv4InterfaceContainer	m_adhocTxInterfaces
	adhoc transmit interfaces More...

NodeContainer	m_adhocTxNodes
	adhoc transmit nodes More...

int	m_asciiTrace
	ascii trace More...

std::string	m_CSVfileName
	CSV file name. More...

std::string	m_CSVfileName2
	CSV file name. More...

int	m_cumulativeBsmCaptureStart
	capture start More...

std::string	m_exp
	exp More...

uint32_t	m_fading
	fading More...

double	m_gpsAccuracyNs
	GPS accuracy. More...

std::string	m_loadConfigFilename
	load config file name More...

int	m_log
	log More...

std::string	m_logFile
	log file More...

uint32_t	m_lossModel
	loss model More...

std::string	m_lossModelName
	loss model name More...

uint32_t	m_mobility
	mobility More...

uint32_t	m_nNodes
	number of nodes More...

int	m_nodePause
	in s More...

int	m_nodeSpeed
	in m/s More...

uint32_t	m_nSinks
	number of sinks More...

std::ofstream	m_os
	output stream More...

int	m_pcap
	PCAP. More...

std::string	m_phyMode
	phy mode More...

std::string	m_phyModeB
	phy mode More...

uint32_t	m_port
	port More...

uint32_t	m_protocol
	protocol More...

std::string	m_protocolName
	protocol name More...

std::string	m_rate
	rate More...

Ptr< RoutingHelper >	m_routingHelper
	routing helper More...

int	m_routingTables
	routing tables More...

std::string	m_saveConfigFilename
	save configi file name More...

uint32_t	m_scenario
	scenario More...

int64_t	m_streamIndex
	used to get consistent random numbers across scenarios More...

double	m_TotalSimTime
	total sim time More...

std::string	m_traceFile
	trace file More...

bool	m_traceMobility
	trace mobility More...

std::string	m_trName
	trace file name More...

double	m_txMaxDelayMs
	transmit maximum delay More...

double	m_txp
	distance More...

double	m_txSafetyRange1
	range 1 More...

double	m_txSafetyRange10
	range 10 More...

double	m_txSafetyRange2
	range 2 More...

double	m_txSafetyRange3
	range 3 More...

double	m_txSafetyRange4
	range 4 More...

double	m_txSafetyRange5
	range 5 More...

double	m_txSafetyRange6
	range 6 More...

double	m_txSafetyRange7
	range 7 More...

double	m_txSafetyRange8
	range 8 More...

double	m_txSafetyRange9
	range 9 More...

std::vector< double >	m_txSafetyRanges
	list of ranges More...

int	m_verbose
	verbose More...

WaveBsmHelper	m_waveBsmHelper
	helper More...

double	m_waveInterval
	seconds More...

uint32_t	m_wavePacketSize
	bytes More...

Ptr< WifiPhyStats >	m_wifiPhyStats
	wifi phy statistics More...

Detailed Description

The VanetRoutingExperiment class implements a wifi app that allows VANET routing experiments to be simulated.

Definition at line 1079 of file vanet-routing-compare.cc.

Constructor & Destructor Documentation

◆ VanetRoutingExperiment()

VanetRoutingExperiment::VanetRoutingExperiment ( )

Constructor.

Returns: none

Definition at line 1315 of file vanet-routing-compare.cc.

References m_log, m_routingHelper, and m_wifiPhyStats.

Member Function Documentation

◆ CheckThroughput()

void VanetRoutingExperiment::CheckThroughput ( )

private

Checks the throughput and outputs summary to CSV file1.

This is scheduled and called once per second

Returns: none

Definition at line 1756 of file vanet-routing-compare.cc.

References RoutingStats::GetCumulativeTxBytes(), RoutingHelper::GetRoutingStats(), RoutingStats::GetRxBytes(), RoutingStats::GetRxPkts(), WifiPhyStats::GetTxBytes(), ns3::WaveBsmHelper::GetWaveBsmStats(), m_CSVfileName, m_cumulativeBsmCaptureStart, m_log, m_nSinks, m_protocolName, m_routingHelper, m_txp, m_waveBsmHelper, m_wifiPhyStats, ns3::Now(), NS_LOG_UNCOND, ns3::Seconds(), RoutingStats::SetRxBytes(), and RoutingStats::SetRxPkts().

Referenced by Run().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ CommandSetup()

void VanetRoutingExperiment::CommandSetup	(	int	argc,
		char **	argv
	)

private

Run the simulation.

Parameters

argc	command line argument count
argv	command line parameters

Returns: none

Definition at line 2006 of file vanet-routing-compare.cc.

References second::cmd, ConfigStoreHelper::LoadConfig(), m_80211mode, m_asciiTrace, m_CSVfileName, m_CSVfileName2, m_cumulativeBsmCaptureStart, m_exp, m_fading, m_gpsAccuracyNs, m_loadConfigFilename, m_logFile, m_lossModel, m_mobility, m_nNodes, m_nodePause, m_nodeSpeed, m_nSinks, m_pcap, m_phyMode, m_phyModeB, m_protocol, m_rate, m_routingTables, m_saveConfigFilename, m_scenario, m_TotalSimTime, m_traceFile, m_traceMobility, m_txMaxDelayMs, m_txp, m_txSafetyRange1, m_txSafetyRange10, m_txSafetyRange2, m_txSafetyRange3, m_txSafetyRange4, m_txSafetyRange5, m_txSafetyRange6, m_txSafetyRange7, m_txSafetyRange8, m_txSafetyRange9, m_verbose, m_waveInterval, m_wavePacketSize, and SetConfigFromGlobals().

Referenced by ParseCommandLineArguments().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ ConfigureApplications()

void VanetRoutingExperiment::ConfigureApplications ( )

protectedvirtual

Configure applications.

Returns: none

Reimplemented from WifiApp.

Definition at line 1625 of file vanet-routing-compare.cc.

References ns3::Config::Connect(), m_routingHelper, ns3::MakeCallback(), RoutingHelper::OnOffTrace(), SetupRoutingMessages(), and SetupWaveMessages().

Here is the call graph for this function:

◆ ConfigureChannels()

void VanetRoutingExperiment::ConfigureChannels ( )

protectedvirtual

Configure channels.

Returns: none

Reimplemented from WifiApp.

Definition at line 1596 of file vanet-routing-compare.cc.

References SetupAdhocDevices().

Here is the call graph for this function:

◆ ConfigureDefaults()

void VanetRoutingExperiment::ConfigureDefaults ( void )

private

Configure default attributes.

Returns: none

Definition at line 2116 of file vanet-routing-compare.cc.

References m_80211mode, m_phyMode, m_phyModeB, m_rate, and ns3::Config::SetDefault().

Referenced by ParseCommandLineArguments().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ ConfigureDevices()

void VanetRoutingExperiment::ConfigureDevices ( )

protectedvirtual

Configure devices.

Returns: none

Reimplemented from WifiApp.

Definition at line 1603 of file vanet-routing-compare.cc.

References ns3::Config::Connect(), m_wifiPhyStats, ns3::MakeCallback(), WifiPhyStats::PhyRxDrop(), WifiPhyStats::PhyTxDrop(), and WifiPhyStats::PhyTxTrace().

Here is the call graph for this function:

◆ ConfigureMobility()

void VanetRoutingExperiment::ConfigureMobility ( )

protectedvirtual

Configure mobility.

Returns: none

Reimplemented from WifiApp.

Definition at line 1619 of file vanet-routing-compare.cc.

References SetupAdhocMobilityNodes().

Here is the call graph for this function:

◆ ConfigureNodes()

void VanetRoutingExperiment::ConfigureNodes ( )

protectedvirtual

Configure nodes.

Returns: none

Reimplemented from WifiApp.

Definition at line 1590 of file vanet-routing-compare.cc.

References ns3::NodeContainer::Create(), m_adhocTxNodes, and m_nNodes.

Here is the call graph for this function:

◆ ConfigureTracing()

void VanetRoutingExperiment::ConfigureTracing ( )

protectedvirtual

Configure tracing.

Returns: none

Reimplemented from WifiApp.

Definition at line 1643 of file vanet-routing-compare.cc.

References ns3::AsciiTraceHelper::CreateFileStream(), m_trName, SetupLogFile(), SetupLogging(), and WriteCsvHeader().

Here is the call graph for this function:

◆ CourseChange()

void VanetRoutingExperiment::CourseChange	(	std::ostream *	os,
		std::string	context,
		Ptr< const MobilityModel >	mobility
	)

staticprivate

Course change function.

Parameters

os	the output stream
context	trace source context (unused)
mobility	the mobility model

Definition at line 1733 of file vanet-routing-compare.cc.

References third::mobility, and ns3::Now().

Referenced by SetupAdhocMobilityNodes().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ ParseCommandLineArguments()

void VanetRoutingExperiment::ParseCommandLineArguments	(	int	argc,
		char **	argv
	)

protectedvirtual

Process command line arguments.

Parameters

argc	program arguments count
argv	program arguments

Returns: none

Reimplemented from WifiApp.

Definition at line 1556 of file vanet-routing-compare.cc.

References CommandSetup(), ConfigureDefaults(), ns3::WaveBsmHelper::GetWaveBsmStats(), m_log, m_routingHelper, m_saveConfigFilename, m_txSafetyRange1, m_txSafetyRange10, m_txSafetyRange2, m_txSafetyRange3, m_txSafetyRange4, m_txSafetyRange5, m_txSafetyRange6, m_txSafetyRange7, m_txSafetyRange8, m_txSafetyRange9, m_txSafetyRanges, m_waveBsmHelper, ConfigStoreHelper::SaveConfig(), SetGlobalsFromConfig(), RoutingHelper::SetLogging(), and SetupScenario().

Here is the call graph for this function:

◆ ProcessOutputs()

void VanetRoutingExperiment::ProcessOutputs ( )

protectedvirtual

Process outputs.

Returns: none

Reimplemented from WifiApp.

Definition at line 1660 of file vanet-routing-compare.cc.

References RoutingStats::GetCumulativeRxBytes(), RoutingStats::GetCumulativeTxBytes(), RoutingHelper::GetRoutingStats(), WifiPhyStats::GetTxBytes(), ns3::WaveBsmHelper::GetWaveBsmStats(), m_CSVfileName2, m_log, m_os, m_routingHelper, m_TotalSimTime, m_waveBsmHelper, m_wifiPhyStats, and NS_LOG_UNCOND.

Here is the call graph for this function:

◆ Run()

void VanetRoutingExperiment::Run ( void )

private

Run the simulation.

Returns: none

Definition at line 1719 of file vanet-routing-compare.cc.

References CheckThroughput(), m_TotalSimTime, NS_LOG_INFO, and ns3::Seconds().

Referenced by RunSimulation().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ RunSimulation()

void VanetRoutingExperiment::RunSimulation ( )

protectedvirtual

Run the simulation.

Returns: none

Reimplemented from WifiApp.

Definition at line 1654 of file vanet-routing-compare.cc.

References Run().

Here is the call graph for this function:

◆ SetConfigFromGlobals()

void VanetRoutingExperiment::SetConfigFromGlobals ( )

private

Set up configuration parameter from the global variables.

Returns: none

Definition at line 1852 of file vanet-routing-compare.cc.

References ns3::DoubleValue::Get(), ns3::StringValue::Get(), ns3::UintegerValue::Get(), m_80211mode, m_asciiTrace, m_CSVfileName, m_CSVfileName2, m_cumulativeBsmCaptureStart, m_fading, m_gpsAccuracyNs, m_logFile, m_lossModel, m_mobility, m_nNodes, m_nodePause, m_nodeSpeed, m_nSinks, m_pcap, m_phyMode, m_phyModeB, m_port, m_protocol, m_rate, m_routingTables, m_scenario, m_TotalSimTime, m_traceFile, m_traceMobility, m_trName, m_txMaxDelayMs, m_txp, m_txSafetyRange1, m_txSafetyRange10, m_txSafetyRange2, m_txSafetyRange3, m_txSafetyRange4, m_txSafetyRange5, m_txSafetyRange6, m_txSafetyRange7, m_txSafetyRange8, m_txSafetyRange9, m_verbose, m_waveInterval, and m_wavePacketSize.

Referenced by CommandSetup().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ SetDefaultAttributeValues()

void VanetRoutingExperiment::SetDefaultAttributeValues ( )

protectedvirtual

Sets default attribute values.

Returns: none

Reimplemented from WifiApp.

Definition at line 1379 of file vanet-routing-compare.cc.

◆ SetGlobalsFromConfig()

void VanetRoutingExperiment::SetGlobalsFromConfig ( )

private

Set up the global variables from the configuration parameters.

Returns: none

Definition at line 1951 of file vanet-routing-compare.cc.

References g_80211mode, g_asciiTrace, g_CSVfileName, g_CSVfileName2, g_cumulativeBsmCaptureStart, g_fading, g_gpsAccuracyNs, g_logFile, g_lossModel, g_mobility, g_nNodes, g_nodePause, g_nodeSpeed, g_nSinks, g_pcap, g_phyMode, g_phyModeB, g_port, g_protocol, g_rate, g_routingTables, g_scenario, g_totalTime, g_traceFile, g_traceMobility, g_trName, g_txMaxDelayMs, g_txp, g_txSafetyRange1, g_txSafetyRange10, g_txSafetyRange2, g_txSafetyRange3, g_txSafetyRange4, g_txSafetyRange5, g_txSafetyRange6, g_txSafetyRange7, g_txSafetyRange8, g_txSafetyRange9, g_verbose, g_waveInterval, g_wavePacketSize, ns3::StringValue::Get(), m_80211mode, m_asciiTrace, m_CSVfileName, m_CSVfileName2, m_cumulativeBsmCaptureStart, m_fading, m_gpsAccuracyNs, m_logFile, m_lossModel, m_mobility, m_nNodes, m_nodePause, m_nodeSpeed, m_nSinks, m_pcap, m_phyMode, m_phyModeB, m_port, m_protocol, m_rate, m_routingTables, m_scenario, m_TotalSimTime, m_traceFile, m_traceMobility, m_trName, m_txMaxDelayMs, m_txp, m_txSafetyRange1, m_txSafetyRange10, m_txSafetyRange2, m_txSafetyRange3, m_txSafetyRange4, m_txSafetyRange5, m_txSafetyRange6, m_txSafetyRange7, m_txSafetyRange8, m_txSafetyRange9, m_verbose, m_waveInterval, m_wavePacketSize, and ns3::GlobalValue::SetValue().

Referenced by ParseCommandLineArguments().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ SetupAdhocDevices()

void VanetRoutingExperiment::SetupAdhocDevices ( )

private

Set up the adhoc devices.

Returns: none

Definition at line 2179 of file vanet-routing-compare.cc.

References ns3::YansWifiChannelHelper::AddPropagationLoss(), third::channel, ns3::YansWifiChannelHelper::Create(), ns3::AsciiTraceHelper::CreateFileStream(), ns3::AsciiTraceHelperForDevice::EnableAsciiAll(), ns3::Wifi80211pHelper::EnableLogComponents(), ns3::WaveHelper::EnableLogComponents(), ns3::PcapHelperForDevice::EnablePcapAll(), ns3::Wifi80211pHelper::Install(), ns3::WaveHelper::Install(), m_80211mode, m_adhocTxDevices, m_adhocTxNodes, m_asciiTrace, m_fading, m_lossModel, m_lossModelName, m_pcap, m_phyMode, m_phyModeB, m_trName, m_txp, m_verbose, NS_LOG_ERROR, ns3::WifiPhyHelper::Set(), ns3::YansWifiPhyHelper::SetChannel(), ns3::WifiPhyHelper::SetPcapDataLinkType(), ns3::YansWifiChannelHelper::SetPropagationDelay(), ns3::WaveHelper::SetRemoteStationManager(), ns3::WifiHelper::SetRemoteStationManager(), ns3::WifiMacHelper::SetType(), third::wifi, and ns3::WIFI_PHY_STANDARD_80211b.

Referenced by ConfigureChannels().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ SetupAdhocMobilityNodes()

void VanetRoutingExperiment::SetupAdhocMobilityNodes ( )

private

Set up the adhoc mobility nodes.

Returns: none

Definition at line 2133 of file vanet-routing-compare.cc.

References ns3::PositionAllocator::AssignStreams(), ns3::MobilityHelper::AssignStreams(), ns3::Config::Connect(), CourseChange(), ns3::ObjectFactory::Create(), ns3::Object::GetObject(), ns3::Ns2MobilityHelper::Install(), ns3::MobilityHelper::Install(), m_adhocTxNodes, m_mobility, m_nNodes, m_nodePause, m_nodeSpeed, m_os, m_streamIndex, m_traceFile, ns3::MakeBoundCallback(), ns3::ObjectFactory::Set(), ns3::MobilityHelper::SetMobilityModel(), ns3::MobilityHelper::SetPositionAllocator(), and ns3::ObjectFactory::SetTypeId().

Referenced by ConfigureMobility().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ SetupLogFile()

void VanetRoutingExperiment::SetupLogFile ( )

private

Set up log file.

Returns: none

Definition at line 2100 of file vanet-routing-compare.cc.

References m_logFile, and m_os.

Referenced by ConfigureTracing().

Here is the caller graph for this function:

◆ SetupLogging()

void VanetRoutingExperiment::SetupLogging ( )

private

Set up logging.

Returns: none

Definition at line 2106 of file vanet-routing-compare.cc.

References ns3::LOG_LEVEL_DEBUG, and ns3::LogComponentEnable().

Referenced by ConfigureTracing().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ SetupRoutingMessages()

void VanetRoutingExperiment::SetupRoutingMessages ( )

private

Set up generation of packets to be routed through the vehicular network.

Returns: none

Definition at line 2348 of file vanet-routing-compare.cc.

References RoutingHelper::Install(), m_adhocTxDevices, m_adhocTxInterfaces, m_adhocTxNodes, m_nSinks, m_protocol, m_routingHelper, m_routingTables, and m_TotalSimTime.

Referenced by ConfigureApplications().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ SetupScenario()

void VanetRoutingExperiment::SetupScenario ( )

private

Set up a prescribed scenario.

Returns: none

Definition at line 2360 of file vanet-routing-compare.cc.

References m_CSVfileName, m_logFile, m_mobility, m_nNodes, m_nodePause, m_nodeSpeed, m_scenario, m_TotalSimTime, and m_traceFile.

Referenced by ParseCommandLineArguments().

Here is the caller graph for this function:

◆ SetupWaveMessages()

void VanetRoutingExperiment::SetupWaveMessages ( )

private

Set up generation of IEEE 1609 WAVE messages, as a Basic Safety Message (BSM).

The BSM is typically a ~200-byte packets broadcast by all vehicles at a nominal rate of 10 Hz

Returns: none

Definition at line 2322 of file vanet-routing-compare.cc.

References ns3::WaveBsmHelper::AssignStreams(), ns3::WaveBsmHelper::Install(), m_80211mode, m_adhocTxInterfaces, m_adhocTxNodes, m_gpsAccuracyNs, m_streamIndex, m_TotalSimTime, m_txMaxDelayMs, m_txSafetyRanges, m_waveBsmHelper, m_waveInterval, m_wavePacketSize, ns3::MilliSeconds(), and ns3::Seconds().

Referenced by ConfigureApplications().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ WriteCsvHeader()

void VanetRoutingExperiment::WriteCsvHeader ( )

private

Write the header line to the CSV file1.

Returns: none

Definition at line 2404 of file vanet-routing-compare.cc.

References m_CSVfileName, and m_CSVfileName2.

Referenced by ConfigureTracing().

Here is the caller graph for this function:

Member Data Documentation

◆ m_80211mode

uint32_t VanetRoutingExperiment::m_80211mode

private

80211 mode

Definition at line 1266 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ConfigureDefaults(), SetConfigFromGlobals(), SetGlobalsFromConfig(), SetupAdhocDevices(), and SetupWaveMessages().

◆ m_adhocTxDevices

NetDeviceContainer VanetRoutingExperiment::m_adhocTxDevices

private

adhoc transmit devices

Definition at line 1282 of file vanet-routing-compare.cc.

Referenced by SetupAdhocDevices(), and SetupRoutingMessages().

◆ m_adhocTxInterfaces

Ipv4InterfaceContainer VanetRoutingExperiment::m_adhocTxInterfaces

private

adhoc transmit interfaces

Definition at line 1283 of file vanet-routing-compare.cc.

Referenced by SetupRoutingMessages(), and SetupWaveMessages().

◆ m_adhocTxNodes

NodeContainer VanetRoutingExperiment::m_adhocTxNodes

private

adhoc transmit nodes

Definition at line 1299 of file vanet-routing-compare.cc.

Referenced by ConfigureNodes(), SetupAdhocDevices(), SetupAdhocMobilityNodes(), SetupRoutingMessages(), and SetupWaveMessages().

◆ m_asciiTrace

int VanetRoutingExperiment::m_asciiTrace

private

ascii trace

Definition at line 1288 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupAdhocDevices().

◆ m_CSVfileName

std::string VanetRoutingExperiment::m_CSVfileName

private

CSV file name.

Definition at line 1253 of file vanet-routing-compare.cc.

Referenced by CheckThroughput(), CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), SetupScenario(), and WriteCsvHeader().

◆ m_CSVfileName2

std::string VanetRoutingExperiment::m_CSVfileName2

private

CSV file name.

Definition at line 1254 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ProcessOutputs(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and WriteCsvHeader().

◆ m_cumulativeBsmCaptureStart

int VanetRoutingExperiment::m_cumulativeBsmCaptureStart

private

capture start

Definition at line 1312 of file vanet-routing-compare.cc.

Referenced by CheckThroughput(), CommandSetup(), SetConfigFromGlobals(), and SetGlobalsFromConfig().

◆ m_exp

std::string VanetRoutingExperiment::m_exp

private

exp

Definition at line 1311 of file vanet-routing-compare.cc.

Referenced by CommandSetup().

◆ m_fading

uint32_t VanetRoutingExperiment::m_fading

private

fading

Definition at line 1262 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupAdhocDevices().

◆ m_gpsAccuracyNs

double VanetRoutingExperiment::m_gpsAccuracyNs

private

GPS accuracy.

Definition at line 1285 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupWaveMessages().

◆ m_loadConfigFilename

std::string VanetRoutingExperiment::m_loadConfigFilename

private

load config file name

Definition at line 1290 of file vanet-routing-compare.cc.

Referenced by CommandSetup().

◆ m_log

int VanetRoutingExperiment::m_log

private

log

Definition at line 1296 of file vanet-routing-compare.cc.

Referenced by CheckThroughput(), ParseCommandLineArguments(), ProcessOutputs(), and VanetRoutingExperiment().

◆ m_logFile

std::string VanetRoutingExperiment::m_logFile

private

log file

Definition at line 1269 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), SetupLogFile(), and SetupScenario().

◆ m_lossModel

uint32_t VanetRoutingExperiment::m_lossModel

private

loss model

Definition at line 1261 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupAdhocDevices().

◆ m_lossModelName

std::string VanetRoutingExperiment::m_lossModelName

private

loss model name

Definition at line 1263 of file vanet-routing-compare.cc.

Referenced by SetupAdhocDevices().

◆ m_mobility

uint32_t VanetRoutingExperiment::m_mobility

private

mobility

Definition at line 1270 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), SetupAdhocMobilityNodes(), and SetupScenario().

◆ m_nNodes

uint32_t VanetRoutingExperiment::m_nNodes

private

number of nodes

Definition at line 1271 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ConfigureNodes(), SetConfigFromGlobals(), SetGlobalsFromConfig(), SetupAdhocMobilityNodes(), and SetupScenario().

◆ m_nodePause

int VanetRoutingExperiment::m_nodePause

private

in s

Definition at line 1277 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), SetupAdhocMobilityNodes(), and SetupScenario().

◆ m_nodeSpeed

int VanetRoutingExperiment::m_nodeSpeed

private

in m/s

Definition at line 1276 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), SetupAdhocMobilityNodes(), and SetupScenario().

◆ m_nSinks

uint32_t VanetRoutingExperiment::m_nSinks

private

number of sinks

Definition at line 1255 of file vanet-routing-compare.cc.

Referenced by CheckThroughput(), CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupRoutingMessages().

◆ m_os

std::ofstream VanetRoutingExperiment::m_os

private

output stream

Definition at line 1281 of file vanet-routing-compare.cc.

Referenced by ProcessOutputs(), SetupAdhocMobilityNodes(), and SetupLogFile().

◆ m_pcap

int VanetRoutingExperiment::m_pcap

private

PCAP.

Definition at line 1289 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupAdhocDevices().

◆ m_phyMode

std::string VanetRoutingExperiment::m_phyMode

private

phy mode

Definition at line 1265 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ConfigureDefaults(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupAdhocDevices().

◆ m_phyModeB

std::string VanetRoutingExperiment::m_phyModeB

private

phy mode

Definition at line 1274 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ConfigureDefaults(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupAdhocDevices().

◆ m_port

uint32_t VanetRoutingExperiment::m_port

private

port

Definition at line 1252 of file vanet-routing-compare.cc.

Referenced by SetConfigFromGlobals(), and SetGlobalsFromConfig().

◆ m_protocol

uint32_t VanetRoutingExperiment::m_protocol

private

protocol

Definition at line 1259 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupRoutingMessages().

◆ m_protocolName

std::string VanetRoutingExperiment::m_protocolName

private

protocol name

Definition at line 1256 of file vanet-routing-compare.cc.

Referenced by CheckThroughput().

◆ m_rate

std::string VanetRoutingExperiment::m_rate

private

rate

Definition at line 1273 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ConfigureDefaults(), SetConfigFromGlobals(), and SetGlobalsFromConfig().

◆ m_routingHelper

Ptr<RoutingHelper> VanetRoutingExperiment::m_routingHelper

private

routing helper

Definition at line 1294 of file vanet-routing-compare.cc.

Referenced by CheckThroughput(), ConfigureApplications(), ParseCommandLineArguments(), ProcessOutputs(), SetupRoutingMessages(), and VanetRoutingExperiment().

◆ m_routingTables

int VanetRoutingExperiment::m_routingTables

private

routing tables

Definition at line 1287 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupRoutingMessages().

◆ m_saveConfigFilename

std::string VanetRoutingExperiment::m_saveConfigFilename

private

save configi file name

Definition at line 1291 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), and ParseCommandLineArguments().

◆ m_scenario

uint32_t VanetRoutingExperiment::m_scenario

private

scenario

Definition at line 1284 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupScenario().

◆ m_streamIndex

int64_t VanetRoutingExperiment::m_streamIndex

private

used to get consistent random numbers across scenarios

Definition at line 1298 of file vanet-routing-compare.cc.

Referenced by SetupAdhocMobilityNodes(), and SetupWaveMessages().

◆ m_TotalSimTime

double VanetRoutingExperiment::m_TotalSimTime

private

total sim time

Definition at line 1272 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ProcessOutputs(), Run(), SetConfigFromGlobals(), SetGlobalsFromConfig(), SetupRoutingMessages(), SetupScenario(), and SetupWaveMessages().

◆ m_traceFile

std::string VanetRoutingExperiment::m_traceFile

private

trace file

Definition at line 1268 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), SetupAdhocMobilityNodes(), and SetupScenario().

◆ m_traceMobility

bool VanetRoutingExperiment::m_traceMobility

private

trace mobility

Definition at line 1258 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), and SetGlobalsFromConfig().

◆ m_trName

std::string VanetRoutingExperiment::m_trName

private

trace file name

Definition at line 1275 of file vanet-routing-compare.cc.

Referenced by ConfigureTracing(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupAdhocDevices().

◆ m_txMaxDelayMs

double VanetRoutingExperiment::m_txMaxDelayMs

private

transmit maximum delay

Definition at line 1286 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupWaveMessages().

◆ m_txp

double VanetRoutingExperiment::m_txp

private

distance

Definition at line 1257 of file vanet-routing-compare.cc.

Referenced by CheckThroughput(), CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupAdhocDevices().

◆ m_txSafetyRange1

double VanetRoutingExperiment::m_txSafetyRange1

private

range 1

Definition at line 1300 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ParseCommandLineArguments(), SetConfigFromGlobals(), and SetGlobalsFromConfig().

◆ m_txSafetyRange10

double VanetRoutingExperiment::m_txSafetyRange10

private

range 10

Definition at line 1309 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ParseCommandLineArguments(), SetConfigFromGlobals(), and SetGlobalsFromConfig().

◆ m_txSafetyRange2

double VanetRoutingExperiment::m_txSafetyRange2

private

range 2

Definition at line 1301 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ParseCommandLineArguments(), SetConfigFromGlobals(), and SetGlobalsFromConfig().

◆ m_txSafetyRange3

double VanetRoutingExperiment::m_txSafetyRange3

private

range 3

Definition at line 1302 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ParseCommandLineArguments(), SetConfigFromGlobals(), and SetGlobalsFromConfig().

◆ m_txSafetyRange4

double VanetRoutingExperiment::m_txSafetyRange4

private

range 4

Definition at line 1303 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ParseCommandLineArguments(), SetConfigFromGlobals(), and SetGlobalsFromConfig().

◆ m_txSafetyRange5

double VanetRoutingExperiment::m_txSafetyRange5

private

range 5

Definition at line 1304 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ParseCommandLineArguments(), SetConfigFromGlobals(), and SetGlobalsFromConfig().

◆ m_txSafetyRange6

double VanetRoutingExperiment::m_txSafetyRange6

private

range 6

Definition at line 1305 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ParseCommandLineArguments(), SetConfigFromGlobals(), and SetGlobalsFromConfig().

◆ m_txSafetyRange7

double VanetRoutingExperiment::m_txSafetyRange7

private

range 7

Definition at line 1306 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ParseCommandLineArguments(), SetConfigFromGlobals(), and SetGlobalsFromConfig().

◆ m_txSafetyRange8

double VanetRoutingExperiment::m_txSafetyRange8

private

range 8

Definition at line 1307 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ParseCommandLineArguments(), SetConfigFromGlobals(), and SetGlobalsFromConfig().

◆ m_txSafetyRange9

double VanetRoutingExperiment::m_txSafetyRange9

private

range 9

Definition at line 1308 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), ParseCommandLineArguments(), SetConfigFromGlobals(), and SetGlobalsFromConfig().

◆ m_txSafetyRanges

std::vector<double> VanetRoutingExperiment::m_txSafetyRanges

private

list of ranges

Definition at line 1310 of file vanet-routing-compare.cc.

Referenced by ParseCommandLineArguments(), and SetupWaveMessages().

◆ m_verbose

int VanetRoutingExperiment::m_verbose

private

verbose

Definition at line 1280 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupAdhocDevices().

◆ m_waveBsmHelper

WaveBsmHelper VanetRoutingExperiment::m_waveBsmHelper

private

helper

Definition at line 1293 of file vanet-routing-compare.cc.

Referenced by CheckThroughput(), ParseCommandLineArguments(), ProcessOutputs(), and SetupWaveMessages().

◆ m_waveInterval

double VanetRoutingExperiment::m_waveInterval

private

seconds

Definition at line 1279 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupWaveMessages().

◆ m_wavePacketSize

uint32_t VanetRoutingExperiment::m_wavePacketSize

private

bytes

Definition at line 1278 of file vanet-routing-compare.cc.

Referenced by CommandSetup(), SetConfigFromGlobals(), SetGlobalsFromConfig(), and SetupWaveMessages().

◆ m_wifiPhyStats

Ptr<WifiPhyStats> VanetRoutingExperiment::m_wifiPhyStats

private

wifi phy statistics

Definition at line 1295 of file vanet-routing-compare.cc.

Referenced by CheckThroughput(), ConfigureDevices(), ProcessOutputs(), and VanetRoutingExperiment().

The documentation for this class was generated from the following file:

src/wave/examples/vanet-routing-compare.cc

Public Member Functions

Protected Member Functions

Private Member Functions

Static Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ VanetRoutingExperiment()

Member Function Documentation

◆ CheckThroughput()

◆ CommandSetup()

◆ ConfigureApplications()

◆ ConfigureChannels()

◆ ConfigureDefaults()

◆ ConfigureDevices()

◆ ConfigureMobility()

◆ ConfigureNodes()

◆ ConfigureTracing()

◆ CourseChange()

◆ ParseCommandLineArguments()

◆ ProcessOutputs()

◆ Run()

◆ RunSimulation()

◆ SetConfigFromGlobals()

◆ SetDefaultAttributeValues()

◆ SetGlobalsFromConfig()

◆ SetupAdhocDevices()

◆ SetupAdhocMobilityNodes()

◆ SetupLogFile()

◆ SetupLogging()

◆ SetupRoutingMessages()

◆ SetupScenario()

◆ SetupWaveMessages()

◆ WriteCsvHeader()

Member Data Documentation

◆ m_80211mode

◆ m_adhocTxDevices

◆ m_adhocTxInterfaces

◆ m_adhocTxNodes

◆ m_asciiTrace

◆ m_CSVfileName

◆ m_CSVfileName2

◆ m_cumulativeBsmCaptureStart

◆ m_exp

◆ m_fading

◆ m_gpsAccuracyNs

◆ m_loadConfigFilename

◆ m_log

◆ m_logFile

◆ m_lossModel

◆ m_lossModelName

◆ m_mobility

◆ m_nNodes

◆ m_nodePause

◆ m_nodeSpeed

◆ m_nSinks

◆ m_os

◆ m_pcap

◆ m_phyMode

◆ m_phyModeB

◆ m_port

◆ m_protocol

◆ m_protocolName

◆ m_rate

◆ m_routingHelper

◆ m_routingTables

◆ m_saveConfigFilename

◆ m_scenario

◆ m_streamIndex

◆ m_TotalSimTime

◆ m_traceFile

◆ m_traceMobility

◆ m_trName

◆ m_txMaxDelayMs

◆ m_txp

◆ m_txSafetyRange1

◆ m_txSafetyRange10

◆ m_txSafetyRange2

◆ m_txSafetyRange3

◆ m_txSafetyRange4