uan-rc-example.cc

Go to the documentation of this file.

/*
 * Copyright (c) 2009 University of Washington
 *
 * SPDX-License-Identifier: GPL-2.0-only
 *
 * Author: Leonard Tracy <lentracy@gmail.com>
 */
 
/**
 * @file uan-rc-example.cc
 * @ingroup uan
 *
 * This example uses UanMacRc and UanMacRcGw which combined form a system
 * using what is referred to as RC-MAC.  Details of RC-MAC will be published
 * soon.  In brief terms, RC-MAC is a dual channel protocol wherein the
 * available bandwidth is dynamically divided into two channels,
 * a reservation channel and a data channel.  The network is assumed
 * to consist of a single gateway node which services several
 * non-gateway nodes.
 *
 * Time is divided into cycles.  The non-gateway nodes transmit RTS packets
 * on the reservation channel in parallel to scheduled data transmissions
 * (scheduled in the previous cycle), and the gateway stores these requests
 * for the duration of the cycle.  At the start of the next cycle
 * the gateway node transmits a CTS which contains packet transmission times
 * for reserved packets as well as bandwidth allocation information
 *
 * This script deploys a single gateway node (current UanMacRc only supports
 * a single gateway) in the center of a region and then distributes
 * non-gateway nodes around the gateway with a uniformly distributed range
 * between each node and the gateway.
 *
 * The script supports two simulation types.  By default the gateway
 * dynamically determines the optimal parameter settings and
 * simulations are run with varying number of nodes (SimMin to SimMax as
 * set by the command line).  If DoNode=0 is given as a command line option
 * then the mac parameter "a" (approximate expected number of successful
 * RTS arrivals per cycle) is varied as the simulation parameter.
 *
 * For questions about this MAC protocol email "lentracy@gmail.com"
 */
 
#include "uan-rc-example.h"
 
#include "ns3/applications-module.h"
#include "ns3/callback.h"
#include "ns3/config.h"
#include "ns3/core-module.h"
#include "ns3/log.h"
#include "ns3/mobility-module.h"
#include "ns3/network-module.h"
#include "ns3/stats-module.h"
 
#include <fstream>
 
using namespace ns3;
 
NS_LOG_COMPONENT_DEFINE("UanRcExample");
 
Experiment::Experiment()
    : m_simMin(1),
      m_simMax(1),
      m_simStep(1),
      m_numRates(1023),
      m_totalRate(4096),
      m_maxRange(3000),
      m_numNodes(15),
      m_pktSize(1000),
      m_doNode(true),
      m_sifs(Seconds(0.05)),
      m_simTime(Seconds(5000)),
      m_gnuplotfile("uan-rc-example.gpl"),
      m_bytesTotal(0)
{
}
 
void
Experiment::ReceivePacket(Ptr<Socket> socket)
{
    Ptr<Packet> packet;
    while ((packet = socket->Recv()))
    {
        m_bytesTotal += packet->GetSize();
    }
}
 
UanTxMode
Experiment::CreateMode(uint32_t kass, uint32_t fc, bool upperblock, std::string name) const
{
    std::ostringstream buf;
    buf << name << " " << kass;
 
    uint32_t rate = m_totalRate / (m_numRates + 1) * (kass);
    uint32_t bw = kass * m_totalRate / (m_numRates + 1);
    uint32_t fcmode;
    if (upperblock)
    {
        fcmode = (m_totalRate - bw) / 2 + fc;
    }
    else
    {
        fcmode = (uint32_t)((-((double)m_totalRate) + (double)bw) / 2.0 + (double)fc);
    }
 
    uint32_t phyrate = m_totalRate;
 
    UanTxMode mode;
    mode = UanTxModeFactory::CreateMode(UanTxMode::OTHER, rate, phyrate, fcmode, bw, 2, buf.str());
    return mode;
}
 
// Creates m_numRates different modes each dividing m_totalRate Hz (assumes 1 bit per hz)
// centered at frequency fc
void
Experiment::CreateDualModes(uint32_t fc)
{
    for (uint32_t i = 1; i < m_numRates + 1; i++)
    {
        m_controlModes.AppendMode(CreateMode(i, fc, false, "control "));
    }
    for (uint32_t i = m_numRates; i > 0; i--)
    {
        m_dataModes.AppendMode(CreateMode(i, fc, true, "data "));
    }
}
 
uint32_t
Experiment::Run(uint32_t param)
{
    UanHelper uan;
 
    m_bytesTotal = 0;
 
    uint32_t nNodes;
    uint32_t a;
    if (m_doNode)
    {
        a = 0;
        nNodes = param;
    }
    else
    {
        nNodes = m_numNodes;
        a = param;
    }
    Time pDelay = Seconds((double)m_maxRange / 1500.0);
 
    uan.SetPhy("ns3::UanPhyDual",
               "SupportedModesPhy1",
               UanModesListValue(m_dataModes),
               "SupportedModesPhy2",
               UanModesListValue(m_controlModes));
 
    uan.SetMac("ns3::UanMacRcGw",
               "NumberOfRates",
               UintegerValue(m_numRates),
               "NumberOfNodes",
               UintegerValue(nNodes),
               "MaxReservations",
               UintegerValue(a),
               "SIFS",
               TimeValue(m_sifs),
               "MaxPropDelay",
               TimeValue(pDelay),
               "FrameSize",
               UintegerValue(m_pktSize));
    Ptr<UanChannel> chan = CreateObject<UanChannel>();
 
    NodeContainer sink;
    sink.Create(1);
    NetDeviceContainer sinkDev = uan.Install(sink, chan);
 
    uan.SetMac("ns3::UanMacRc",
               "NumberOfRates",
               UintegerValue(m_numRates),
               "MaxPropDelay",
               TimeValue(pDelay));
    NodeContainer nodes;
    nodes.Create(nNodes);
    NetDeviceContainer devices = uan.Install(nodes, chan);
 
    MobilityHelper mobility;
    uint32_t depth = 70;
    Ptr<ListPositionAllocator> pos = CreateObject<ListPositionAllocator>();
 
    Ptr<UniformRandomVariable> urv = CreateObject<UniformRandomVariable>();
    Ptr<UniformRandomVariable> utheta = CreateObject<UniformRandomVariable>();
    pos->Add(Vector(m_maxRange, m_maxRange, depth));
 
    for (uint32_t i = 0; i < nNodes; i++)
    {
        double theta = utheta->GetValue(0, 2.0 * M_PI);
        double r = urv->GetValue(0, m_maxRange);
 
        double x = m_maxRange + r * std::cos(theta);
        double y = m_maxRange + r * std::sin(theta);
 
        pos->Add(Vector(x, y, depth));
    }
 
    mobility.SetPositionAllocator(pos);
    mobility.SetMobilityModel("ns3::ConstantPositionMobilityModel");
    mobility.Install(sink);
    mobility.Install(nodes);
 
    PacketSocketHelper pktskth;
    pktskth.Install(nodes);
    pktskth.Install(sink);
 
    PacketSocketAddress socket;
    socket.SetSingleDevice(sinkDev.Get(0)->GetIfIndex());
    socket.SetPhysicalAddress(sinkDev.Get(0)->GetAddress());
    socket.SetProtocol(0);
 
    OnOffHelper app("ns3::PacketSocketFactory", Address(socket));
    app.SetAttribute("OnTime", StringValue("ns3::ConstantRandomVariable[Constant=1]"));
    app.SetAttribute("OffTime", StringValue("ns3::ConstantRandomVariable[Constant=0]"));
    app.SetAttribute("DataRate", DataRateValue(m_totalRate));
    app.SetAttribute("PacketSize", UintegerValue(m_pktSize));
 
    ApplicationContainer apps = app.Install(nodes);
 
    apps.Start(Seconds(0.5));
    apps.Stop(m_simTime + Seconds(0.5));
 
    Ptr<Node> sinkNode = sink.Get(0);
    TypeId psfid = TypeId::LookupByName("ns3::PacketSocketFactory");
 
    Ptr<Socket> sinkSocket = Socket::CreateSocket(sinkNode, psfid);
    sinkSocket->Bind(socket);
    sinkSocket->SetRecvCallback(MakeCallback(&Experiment::ReceivePacket, this));
 
    Simulator::Stop(m_simTime + Seconds(0.6));
    Simulator::Run();
    Simulator::Destroy();
 
    return m_bytesTotal;
}
 
int
main(int argc, char* argv[])
{
    Experiment exp;
    bool quiet = false;
 
    CommandLine cmd(__FILE__);
    cmd.AddValue("TotalRate", "Total channel capacity", exp.m_totalRate);
    cmd.AddValue("NumberRates",
                 "Number of divided rates ( (NumberRates+1)%TotalRate should be 0)",
                 exp.m_numRates);
    cmd.AddValue("MaxRange", "Maximum range between gateway and acoustic node", exp.m_maxRange);
    cmd.AddValue("SimMin",
                 "Minimum parameter to test (nodes if DoNode=1, \"a\" param otherwise)",
                 exp.m_simMin);
    cmd.AddValue("SimMax",
                 "Maximum parameter to test (nodes if DoNode=1, \"a\" param otherwise)",
                 exp.m_simMax);
    cmd.AddValue("SimStep", "Amount to increment param per trial", exp.m_simStep);
    cmd.AddValue("DataFile", "Filename for GnuPlot", exp.m_gnuplotfile);
    cmd.AddValue("NumberNodes", "Number of nodes (invalid for doNode=1)", exp.m_numNodes);
    cmd.AddValue("SIFS", "SIFS time duration", exp.m_sifs);
    cmd.AddValue("PktSize", "Packet size in bytes", exp.m_pktSize);
    cmd.AddValue("SimTime", "Simulation time per trial", exp.m_simTime);
    cmd.AddValue("DoNode",
                 "1 for do max nodes simulation (invalidates AMin and AMax values)",
                 exp.m_doNode);
    cmd.AddValue("Quiet", "Run in quiet mode (disable logging)", quiet);
    cmd.Parse(argc, argv);
 
    if (!quiet)
    {
        LogComponentEnable("UanRcExample", LOG_LEVEL_ALL);
    }
 
    exp.CreateDualModes(12000);
 
    ;
 
    Gnuplot2dDataset ds;
    for (uint32_t param = exp.m_simMin; param <= exp.m_simMax; param += exp.m_simStep)
    {
        uint32_t bytesRx = exp.Run(param);
        NS_LOG_DEBUG("param=" << param << ":  Received " << bytesRx << " bytes at sink");
 
        double util = bytesRx * 8.0 / (exp.m_simTime.GetSeconds() * exp.m_totalRate);
 
        ds.Add(param, util);
 
        SeedManager::SetRun(SeedManager::GetRun() + 1);
    }
 
    Gnuplot gp;
    gp.AddDataset(ds);
    std::ofstream of(exp.m_gnuplotfile);
    if (!of.is_open())
    {
        NS_FATAL_ERROR("Can not open GNU Plot outfile: " << exp.m_gnuplotfile);
    }
    gp.GenerateOutput(of);
 
    return 0;
}