A Discrete-Event Network Simulator
API
Loading...
Searching...
No Matches
bulk-send-application-test-suite.cc
Go to the documentation of this file.
1/*
2 * Copyright (c) 2020 Tom Henderson (tomh@tomh.org)
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation;
7 *
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
12 *
13 * You should have received a copy of the GNU General Public License
14 * along with this program; if not, write to the Free Software
15 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
16 *
17 */
18
19#include "ns3/application-container.h"
20#include "ns3/boolean.h"
21#include "ns3/bulk-send-application.h"
22#include "ns3/bulk-send-helper.h"
23#include "ns3/inet-socket-address.h"
24#include "ns3/internet-stack-helper.h"
25#include "ns3/ipv4-address-helper.h"
26#include "ns3/ipv4-address.h"
27#include "ns3/ipv4-interface-container.h"
28#include "ns3/node-container.h"
29#include "ns3/node.h"
30#include "ns3/nstime.h"
31#include "ns3/packet-sink-helper.h"
32#include "ns3/packet-sink.h"
33#include "ns3/simple-net-device-helper.h"
34#include "ns3/string.h"
35#include "ns3/test.h"
36#include "ns3/traced-callback.h"
37#include "ns3/uinteger.h"
38
39using namespace ns3;
40
48{
49 public:
51 ~BulkSendBasicTestCase() override;
52
53 private:
54 void DoRun() override;
65 void ReceiveRx(Ptr<const Packet> p, const Address& addr);
66 uint64_t m_sent{0};
67 uint64_t m_received{0};
68};
69
71 : TestCase("Check a basic 300KB transfer")
72{
73}
74
76{
77}
78
79void
81{
82 m_sent += p->GetSize();
83}
84
85void
87{
88 m_received += p->GetSize();
89}
90
91void
93{
94 Ptr<Node> sender = CreateObject<Node>();
95 Ptr<Node> receiver = CreateObject<Node>();
97 nodes.Add(sender);
98 nodes.Add(receiver);
99 SimpleNetDeviceHelper simpleHelper;
100 simpleHelper.SetDeviceAttribute("DataRate", StringValue("10Mbps"));
101 simpleHelper.SetChannelAttribute("Delay", StringValue("10ms"));
102 NetDeviceContainer devices;
103 devices = simpleHelper.Install(nodes);
104 InternetStackHelper internet;
105 internet.Install(nodes);
107 ipv4.SetBase("10.1.1.0", "255.255.255.0");
108 Ipv4InterfaceContainer i = ipv4.Assign(devices);
109 uint16_t port = 9;
110 BulkSendHelper sourceHelper("ns3::TcpSocketFactory", InetSocketAddress(i.GetAddress(1), port));
111 sourceHelper.SetAttribute("MaxBytes", UintegerValue(300000));
112 ApplicationContainer sourceApp = sourceHelper.Install(nodes.Get(0));
113 sourceApp.Start(Seconds(0.0));
114 sourceApp.Stop(Seconds(10.0));
115 PacketSinkHelper sinkHelper("ns3::TcpSocketFactory",
117 ApplicationContainer sinkApp = sinkHelper.Install(nodes.Get(1));
118 sinkApp.Start(Seconds(0.0));
119 sinkApp.Stop(Seconds(10.0));
120
121 Ptr<BulkSendApplication> source = DynamicCast<BulkSendApplication>(sourceApp.Get(0));
122 Ptr<PacketSink> sink = DynamicCast<PacketSink>(sinkApp.Get(0));
123
124 source->TraceConnectWithoutContext("Tx", MakeCallback(&BulkSendBasicTestCase::SendTx, this));
126
129
130 NS_TEST_ASSERT_MSG_EQ(m_sent, 300000, "Sent the full 300000 bytes");
131 NS_TEST_ASSERT_MSG_EQ(m_received, 300000, "Received the full 300000 bytes");
132}
133
143{
144 public:
147
148 private:
149 void DoRun() override;
158 const Address& from,
159 const Address& to,
160 const SeqTsSizeHeader& header);
169 const Address& from,
170 const Address& to,
171 const SeqTsSizeHeader& header);
172 uint64_t m_sent{0};
173 uint64_t m_received{0};
174 uint64_t m_seqTxCounter{0};
175 uint64_t m_seqRxCounter{0};
178};
179
181 : TestCase("Check a 300KB transfer with SeqTsSize header enabled")
182{
183}
184
186{
187}
188
189void
191 const Address& from,
192 const Address& to,
193 const SeqTsSizeHeader& header)
194{
195 // The header is not serialized onto the packet in this trace
196 m_sent += p->GetSize() + header.GetSerializedSize();
197 NS_TEST_ASSERT_MSG_EQ(header.GetSeq(), m_seqTxCounter, "Missing sequence number");
199 NS_TEST_ASSERT_MSG_GT_OR_EQ(header.GetTs(), m_lastTxTs, "Timestamp less than last time");
200 m_lastTxTs = header.GetTs();
201}
202
203void
205 const Address& from,
206 const Address& to,
207 const SeqTsSizeHeader& header)
208{
209 // The header is not serialized onto the packet in this trace
210 m_received += p->GetSize() + header.GetSerializedSize();
211 NS_TEST_ASSERT_MSG_EQ(header.GetSeq(), m_seqRxCounter, "Missing sequence number");
213 NS_TEST_ASSERT_MSG_GT_OR_EQ(header.GetTs(), m_lastRxTs, "Timestamp less than last time");
214 m_lastRxTs = header.GetTs();
215}
216
217void
219{
220 Ptr<Node> sender = CreateObject<Node>();
221 Ptr<Node> receiver = CreateObject<Node>();
223 nodes.Add(sender);
224 nodes.Add(receiver);
225 SimpleNetDeviceHelper simpleHelper;
226 simpleHelper.SetDeviceAttribute("DataRate", StringValue("10Mbps"));
227 simpleHelper.SetChannelAttribute("Delay", StringValue("10ms"));
228 NetDeviceContainer devices;
229 devices = simpleHelper.Install(nodes);
230 InternetStackHelper internet;
231 internet.Install(nodes);
233 ipv4.SetBase("10.1.1.0", "255.255.255.0");
234 Ipv4InterfaceContainer i = ipv4.Assign(devices);
235 uint16_t port = 9;
236 BulkSendHelper sourceHelper("ns3::TcpSocketFactory", InetSocketAddress(i.GetAddress(1), port));
237 sourceHelper.SetAttribute("MaxBytes", UintegerValue(300000));
238 sourceHelper.SetAttribute("EnableSeqTsSizeHeader", BooleanValue(true));
239 ApplicationContainer sourceApp = sourceHelper.Install(nodes.Get(0));
240 sourceApp.Start(Seconds(0.0));
241 sourceApp.Stop(Seconds(10.0));
242 PacketSinkHelper sinkHelper("ns3::TcpSocketFactory",
244 sinkHelper.SetAttribute("EnableSeqTsSizeHeader", BooleanValue(true));
245 ApplicationContainer sinkApp = sinkHelper.Install(nodes.Get(1));
246 sinkApp.Start(Seconds(0.0));
247 sinkApp.Stop(Seconds(10.0));
248
249 Ptr<BulkSendApplication> source = DynamicCast<BulkSendApplication>(sourceApp.Get(0));
250 Ptr<PacketSink> sink = DynamicCast<PacketSink>(sinkApp.Get(0));
251
252 source->TraceConnectWithoutContext("TxWithSeqTsSize",
254 sink->TraceConnectWithoutContext("RxWithSeqTsSize",
256
259
260 NS_TEST_ASSERT_MSG_EQ(m_sent, 300000, "Sent the full 300000 bytes");
261 NS_TEST_ASSERT_MSG_EQ(m_received, 300000, "Received the full 300000 bytes");
262}
263
271{
272 public:
274};
275
277 : TestSuite("bulk-send-application", UNIT)
278{
281}
282
static BulkSendTestSuite g_bulkSendTestSuite
Static variable for test initialization.
Basic test, checks that the right quantity of packets are sent and received.
void DoRun() override
Implementation to actually run this TestCase.
uint64_t m_sent
number of bytes sent
void ReceiveRx(Ptr< const Packet > p, const Address &addr)
Record a packet successfully received.
uint64_t m_received
number of bytes received
void SendTx(Ptr< const Packet > p)
Record a packet successfully sent.
This test checks that the sequence number is sent and received in sequence despite the sending applic...
Time m_lastTxTs
Last recorded timestamp on Tx.
void ReceiveRx(Ptr< const Packet > p, const Address &from, const Address &to, const SeqTsSizeHeader &header)
Record a packet successfully received.
Time m_lastRxTs
Last recorded timestamp on Rx.
uint64_t m_seqRxCounter
Counter for Sequences on Rx.
uint64_t m_seqTxCounter
Counter for Sequences on Tx.
void SendTx(Ptr< const Packet > p, const Address &from, const Address &to, const SeqTsSizeHeader &header)
Record a packet successfully sent.
void DoRun() override
Implementation to actually run this TestCase.
uint64_t m_received
number of bytes received
a polymophic address class
Definition: address.h:100
holds a vector of ns3::Application pointers.
void Start(Time start) const
Start all of the Applications in this container at the start time given as a parameter.
Ptr< Application > Get(uint32_t i) const
Get the Ptr<Application> stored in this container at a given index.
void Stop(Time stop) const
Arrange for all of the Applications in this container to Stop() at the Time given as a parameter.
AttributeValue implementation for Boolean.
Definition: boolean.h:37
A helper to make it easier to instantiate an ns3::BulkSendApplication on a set of nodes.
void SetAttribute(std::string name, const AttributeValue &value)
Helper function used to set the underlying application attributes, not the socket attributes.
ApplicationContainer Install(NodeContainer c) const
Install an ns3::BulkSendApplication on each node of the input container configured with all the attri...
an Inet address class
aggregate IP/TCP/UDP functionality to existing Nodes.
A helper class to make life easier while doing simple IPv4 address assignment in scripts.
static Ipv4Address GetAny()
holds a vector of std::pair of Ptr<Ipv4> and interface index.
Ipv4Address GetAddress(uint32_t i, uint32_t j=0) const
holds a vector of ns3::NetDevice pointers
keep track of a set of node pointers.
void Add(const NodeContainer &nc)
Append the contents of another NodeContainer to the end of this container.
Ptr< Node > Get(uint32_t i) const
Get the Ptr<Node> stored in this container at a given index.
bool TraceConnectWithoutContext(std::string name, const CallbackBase &cb)
Connect a TraceSource to a Callback without a context.
Definition: object-base.cc:311
A helper to make it easier to instantiate an ns3::PacketSinkApplication on a set of nodes.
void SetAttribute(std::string name, const AttributeValue &value)
Helper function used to set the underlying application attributes.
ApplicationContainer Install(NodeContainer c) const
Install an ns3::PacketSinkApplication on each node of the input container configured with all the att...
Smart pointer class similar to boost::intrusive_ptr.
Definition: ptr.h:78
Time GetTs() const
uint32_t GetSeq() const
Header with a sequence, a timestamp, and a "size" attribute.
uint32_t GetSerializedSize() const override
build a set of SimpleNetDevice objects
void SetChannelAttribute(std::string n1, const AttributeValue &v1)
void SetDeviceAttribute(std::string n1, const AttributeValue &v1)
NetDeviceContainer Install(Ptr< Node > node) const
This method creates an ns3::SimpleChannel with the attributes configured by SimpleNetDeviceHelper::Se...
static void Destroy()
Execute the events scheduled with ScheduleDestroy().
Definition: simulator.cc:140
static void Run()
Run the simulation.
Definition: simulator.cc:176
Hold variables of type string.
Definition: string.h:56
encapsulates test code
Definition: test.h:1060
@ QUICK
Fast test.
Definition: test.h:1065
void AddTestCase(TestCase *testCase, TestDuration duration=QUICK)
Add an individual child TestCase to this test suite.
Definition: test.cc:301
A suite of tests to run.
Definition: test.h:1256
Simulation virtual time values and global simulation resolution.
Definition: nstime.h:105
Hold an unsigned integer type.
Definition: uinteger.h:45
uint16_t port
Definition: dsdv-manet.cc:44
#define NS_TEST_ASSERT_MSG_EQ(actual, limit, msg)
Test that an actual and expected (limit) value are equal and report and abort if not.
Definition: test.h:144
#define NS_TEST_ASSERT_MSG_GT_OR_EQ(actual, limit, msg)
Test that an actual value is greater than or equal to a limit and report and abort if not.
Definition: test.h:915
Time Seconds(double value)
Construct a Time in the indicated unit.
Definition: nstime.h:1336
NodeContainer nodes
Every class exported by the ns3 library is enclosed in the ns3 namespace.
Callback< R, Args... > MakeCallback(R(T::*memPtr)(Args...), OBJ objPtr)
Build Callbacks for class method members which take varying numbers of arguments and potentially retu...
Definition: callback.h:702
Ptr< PacketSink > sink
Pointer to the packet sink application.
Definition: wifi-tcp.cc:55