40 #include "ns3/core-module.h"
41 #include "ns3/network-module.h"
42 #include "ns3/internet-module.h"
43 #include "ns3/point-to-point-module.h"
44 #include "ns3/applications-module.h"
45 #include "ns3/error-model.h"
46 #include "ns3/tcp-header.h"
47 #include "ns3/udp-header.h"
49 #include "ns3/event-id.h"
50 #include "ns3/flow-monitor-helper.h"
51 #include "ns3/ipv4-global-routing-helper.h"
74 *cWndStream->
GetStream () <<
"0.0 " << oldval << std::endl;
91 *ssThreshStream->
GetStream () <<
"0.0 " << oldval << std::endl;
158 int main (
int argc,
char *argv[])
160 std::string transport_prot =
"TcpWestwood";
161 double error_p = 0.0;
162 std::string bandwidth =
"2Mbps";
163 std::string access_bandwidth =
"10Mbps";
164 std::string access_delay =
"45ms";
165 bool tracing =
false;
166 std::string tr_file_name =
"";
167 std::string cwnd_tr_file_name =
"";
168 std::string ssthresh_tr_file_name =
"";
169 std::string rtt_tr_file_name =
"";
170 std::string rto_tr_file_name =
"";
171 double data_mbytes = 0;
172 uint32_t mtu_bytes = 400;
173 uint16_t num_flows = 1;
174 float duration = 100;
176 bool flow_monitor =
true;
180 cmd.
AddValue (
"transport_prot",
"Transport protocol to use: TcpTahoe, TcpReno, TcpNewReno, TcpWestwood, TcpWestwoodPlus ", transport_prot);
181 cmd.
AddValue (
"error_p",
"Packet error rate", error_p);
182 cmd.
AddValue (
"bandwidth",
"Bottleneck bandwidth", bandwidth);
183 cmd.
AddValue (
"access_bandwidth",
"Access link bandwidth", access_bandwidth);
184 cmd.
AddValue (
"delay",
"Access link delay", access_delay);
185 cmd.
AddValue (
"tracing",
"Flag to enable/disable tracing", tracing);
186 cmd.
AddValue (
"tr_name",
"Name of output trace file", tr_file_name);
187 cmd.
AddValue (
"cwnd_tr_name",
"Name of output trace file", cwnd_tr_file_name);
188 cmd.
AddValue (
"ssthresh_tr_name",
"Name of output trace file", ssthresh_tr_file_name);
189 cmd.
AddValue (
"rtt_tr_name",
"Name of output trace file", rtt_tr_file_name);
190 cmd.
AddValue (
"rto_tr_name",
"Name of output trace file", rto_tr_file_name);
191 cmd.
AddValue (
"data",
"Number of Megabytes of data to transmit", data_mbytes);
192 cmd.
AddValue (
"mtu",
"Size of IP packets to send in bytes", mtu_bytes);
193 cmd.
AddValue (
"num_flows",
"Number of flows", num_flows);
194 cmd.
AddValue (
"duration",
"Time to allow flows to run in seconds", duration);
195 cmd.
AddValue (
"run",
"Run index (for setting repeatable seeds)", run);
196 cmd.
AddValue (
"flow_monitor",
"Enable flow monitor", flow_monitor);
197 cmd.
Parse (argc, argv);
216 uint32_t tcp_adu_size = mtu_bytes - (ip_header + tcp_header);
220 float start_time = 0.1;
221 float stop_time = start_time + duration;
224 if (transport_prot.compare (
"TcpTahoe") == 0)
228 else if (transport_prot.compare (
"TcpReno") == 0)
232 else if (transport_prot.compare (
"TcpNewReno") == 0)
236 else if (transport_prot.compare (
"TcpWestwood") == 0)
241 else if (transport_prot.compare (
"TcpWestwoodPlus") == 0)
257 sources.
Create (num_flows);
280 address.
SetBase (
"10.0.0.0",
"255.255.255.0");
288 for (
int i = 0; i < num_flows; i++)
291 devices = LocalLink.
Install (sources.
Get (i), gateways.
Get (0));
294 devices = UnReLink.
Install (gateways.
Get (0), sinks.
Get (i));
296 interfaces = address.
Assign (devices);
297 sink_interfaces.
Add (interfaces.
Get (1));
303 uint16_t
port = 50000;
307 for (uint16_t i = 0; i < sources.
GetN (); i++)
311 if (transport_prot.compare (
"TcpTahoe") == 0
312 || transport_prot.compare (
"TcpReno") == 0
313 || transport_prot.compare (
"TcpNewReno") == 0
314 || transport_prot.compare (
"TcpWestwood") == 0
315 || transport_prot.compare (
"TcpWestwoodPlus") == 0)
319 ftp.SetAttribute (
"Remote", remoteAddress);
321 ftp.SetAttribute (
"MaxBytes",
UintegerValue (
int(data_mbytes * 1000000)));
334 NS_LOG_DEBUG (
"Invalid transport protocol " << transport_prot <<
" specified");
342 if (tr_file_name.compare (
"") != 0)
346 ascii.open (tr_file_name.c_str ());
351 if (cwnd_tr_file_name.compare (
"") != 0)
356 if (ssthresh_tr_file_name.compare (
"") != 0)
361 if (rtt_tr_file_name.compare (
"") != 0)
366 if (rto_tr_file_name.compare (
"") != 0)
holds a vector of ns3::Application pointers.
Simulation virtual time values and global simulation resolution.
Manage ASCII trace files for device models.
static Ipv4Address GetAny(void)
void SetStream(int64_t stream)
Specifies the stream number for this RNG stream.
std::pair< Ptr< Ipv4 >, uint32_t > Get(uint32_t i) const
Get the std::pair of an Ptr and interface stored at the location specified by the index...
A helper to make it easier to instantiate an ns3::BulkSendApplication on a set of nodes...
holds a vector of std::pair of Ptr and interface index.
static void PopulateRoutingTables(void)
Build a routing database and initialize the routing tables of the nodes in the simulation.
Hold variables of type string.
NetDeviceContainer Install(NodeContainer c)
static void Run(void)
Run the simulation.
Ptr< OutputStreamWrapper > cWndStream
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name.
aggregate IP/TCP/UDP functionality to existing Nodes.
#define NS_LOG_INFO(msg)
Use NS_LOG to output a message of level LOG_INFO.
A helper to make it easier to instantiate an ns3::PacketSinkApplication on a set of nodes...
Ptr< OutputStreamWrapper > CreateFileStream(std::string filename, std::ios::openmode filemode=std::ios::out)
Create and initialize an output stream object we'll use to write the traced bits. ...
Build a set of PointToPointNetDevice objects.
static EventId Schedule(Time const &time, MEM mem_ptr, OBJ obj)
Schedule an event to expire at the relative time "time" is reached.
void SetDeviceAttribute(std::string name, const AttributeValue &value)
Set an attribute value to be propagated to each NetDevice created by the helper.
void SerializeToXmlFile(std::string fileName, bool enableHistograms, bool enableProbes)
Same as SerializeToXmlStream, but writes to a file instead.
static void SetRun(uint64_t run)
Set the run number of simulation.
a polymophic address class
uint32_t GetN(void) const
Get the number of Ptr stored in this container.
double GetSeconds(void) const
Get an approximation of the time stored in this instance in the indicated unit.
Ptr< OutputStreamWrapper > rttStream
static void RttTracer(Time oldval, Time newval)
static TypeId GetTypeId(void)
Get the type ID.
void EnablePcapAll(std::string prefix, bool promiscuous=false)
Enable pcap output on each device (which is of the appropriate type) in the set of all nodes created ...
Hold variables of type enum.
void InstallAll(void) const
Aggregate IPv4, IPv6, UDP, and TCP stacks to all nodes in the simulation.
Hold an unsigned integer type.
void SetRate(double rate)
holds a vector of ns3::NetDevice pointers
static TypeId GetTypeId(void)
Get the type ID.
A class encapsulating an output stream.
AttributeValue implementation for TypeId.
Callback< R > MakeCallback(R(T::*memPtr)(void), OBJ objPtr)
void ConnectWithoutContext(std::string path, const CallbackBase &cb)
Ptr< FlowMonitor > InstallAll()
Enable flow monitoring on all nodes.
void Start(Time start)
Arrange for all of the Applications in this container to Start() at the Time given as a parameter...
Parse command-line arguments.
#define NS_LOG_LOGIC(msg)
Use NS_LOG to output a message of level LOG_LOGIC.
void EnableAsciiIpv4All(std::string prefix)
Enable ascii trace output on all Ipv4 and interface pairs existing in the set of all nodes created in...
static void Destroy(void)
Execute the events scheduled with ScheduleDestroy().
static void CwndTracer(uint32_t oldval, uint32_t newval)
static TypeId GetTypeId(void)
Get the type ID.
Every class exported by the ns3 library is enclosed in the ns3 namespace.
keep track of a set of node pointers.
Hold objects of type Ptr.
static void TraceSsThresh(std::string ssthresh_tr_file_name)
static TypeId GetTypeId(void)
Get the type ID.
static TypeId GetTypeId(void)
Get the type ID.
Ptr< OutputStreamWrapper > rtoStream
Helper to enable IP flow monitoring on a set of Nodes.
static Time Now(void)
Return the current simulation virtual time.
void SetChannelAttribute(std::string name, const AttributeValue &value)
Set an attribute value to be propagated to each Channel created by the helper.
static void SetSeed(uint32_t seed)
set the seed it will duplicate the seed value 6 times
void SetUnit(enum ErrorUnit error_unit)
AttributeValue implementation for Address.
void Stop(Time stop)
Arrange for all of the Applications in this container to Stop() at the Time given as a parameter...
Ipv4InterfaceContainer Assign(const NetDeviceContainer &c)
Assign IP addresses to the net devices specified in the container based on the current network prefix...
void AddValue(const std::string &name, const std::string &help, T &value)
Add a program argument, assigning to POD.
static void Stop(void)
Tell the Simulator the calling event should be the last one executed.
Ptr< Node > Get(uint32_t i) const
Get the Ptr stored in this container at a given index.
#define NS_LOG_DEBUG(msg)
Use NS_LOG to output a message of level LOG_DEBUG.
Time Seconds(double value)
Construct a Time in the indicated unit.
void SetDefault(std::string name, const AttributeValue &value)
void SetRandomVariable(Ptr< RandomVariableStream >)
Ipv4Address NewNetwork(void)
Increment the network number and reset the IP address counter to the base value provided in the SetBa...
void Parse(int argc, char *argv[])
Parse the program arguments.
A helper class to make life easier while doing simple IPv4 address assignment in scripts.
static void TraceRtt(std::string rtt_tr_file_name)
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer.
void Add(Ipv4InterfaceContainer other)
Concatenate the entries in the other container with ours.
Determine which packets are errored corresponding to an underlying distribution, rate, and unit.
static void RtoTracer(Time oldval, Time newval)
static void TraceCwnd(std::string cwnd_tr_file_name)
static void SsThreshTracer(uint32_t oldval, uint32_t newval)
std::ostream * GetStream(void)
Return a pointer to an ostream previously set in the wrapper.
Ptr< OutputStreamWrapper > ssThreshStream
void SetBase(Ipv4Address network, Ipv4Mask mask, Ipv4Address base="0.0.0.1")
Set the base network number, network mask and base address.
Ipv4Address GetAddress(uint32_t i, uint32_t j=0) const
static void TraceRto(std::string rto_tr_file_name)