32 #include "ns3/core-module.h"
33 #include "ns3/network-module.h"
34 #include "ns3/applications-module.h"
35 #include "ns3/mobility-module.h"
36 #include "ns3/config-store-module.h"
37 #include "ns3/wifi-module.h"
38 #include "ns3/internet-module.h"
39 #include "ns3/dsr-module.h"
46 main (
int argc,
char *argv[])
80 double TotalTime = 600.0;
81 double dataTime = 500.0;
83 uint32_t packetSize = 64;
84 double dataStart = 100.0;
87 double pauseTime = 0.0;
88 double nodeSpeed = 20.0;
89 double txpDistance = 250.0;
91 std::string rate =
"0.512kbps";
92 std::string dataMode (
"DsssRate11Mbps");
93 std::string phyMode (
"DsssRate11Mbps");
97 cmd.
AddValue (
"nWifis",
"Number of wifi nodes", nWifis);
98 cmd.
AddValue (
"nSinks",
"Number of SINK traffic nodes", nSinks);
99 cmd.
AddValue (
"rate",
"CBR traffic rate(in kbps), Default:8", rate);
100 cmd.
AddValue (
"nodeSpeed",
"Node speed in RandomWayPoint model, Default:20", nodeSpeed);
101 cmd.
AddValue (
"packetSize",
"The packet size", packetSize);
102 cmd.
AddValue (
"txpDistance",
"Specify node's transmit range, Default:300", txpDistance);
103 cmd.
AddValue (
"pauseTime",
"pauseTime for mobility model, Default: 0", pauseTime);
104 cmd.
Parse (argc, argv);
110 adhocNodes.
Create (nWifis);
113 NS_LOG_INFO (
"setting the default phy and channel parameters");
119 NS_LOG_INFO (
"setting the default phy and channel parameters ");
134 wifiMac.
SetType (
"ns3::AdhocWifiMac");
135 allDevices = wifi.
Install (wifiPhy, wifiMac, adhocNodes);
145 pos.
SetTypeId (
"ns3::RandomRectanglePositionAllocator");
146 pos.
Set (
"X",
StringValue (
"ns3::UniformRandomVariable[Min=0.0|Max=300.0]"));
147 pos.
Set (
"Y",
StringValue (
"ns3::UniformRandomVariable[Min=0.0|Max=1500.0]"));
150 std::ostringstream speedUniformRandomVariableStream;
151 speedUniformRandomVariableStream <<
"ns3::UniformRandomVariable[Min=0.0|Max="
155 std::ostringstream pauseConstantRandomVariableStream;
156 pauseConstantRandomVariableStream <<
"ns3::ConstantRandomVariable[Constant="
162 "Speed",
StringValue (speedUniformRandomVariableStream.str ()),
163 "Pause",
StringValue (pauseConstantRandomVariableStream.str ()),
166 adhocMobility.
Install (adhocNodes);
172 dsrMain.
Install (dsr, adhocNodes);
176 address.
SetBase (
"10.1.1.0",
"255.255.255.0");
178 allInterfaces = address.
Assign (allDevices);
181 double randomStartTime = (1 / ppers) / nSinks;
183 for (uint32_t i = 0; i < nSinks; ++i)
187 apps_sink.
Start (Seconds (0.0));
188 apps_sink.
Stop (Seconds (TotalTime));
192 onoff1.SetAttribute (
"OffTime",
StringValue (
"ns3::ConstantRandomVariable[Constant=0.0]"));
193 onoff1.SetAttribute (
"PacketSize",
UintegerValue (packetSize));
197 apps1.
Start (Seconds (dataStart + i * randomStartTime));
198 apps1.
Stop (Seconds (dataTime + i * randomStartTime));
void AddPropagationLoss(std::string name, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
holds a vector of ns3::Application pointers.
Manage ASCII trace files for device models.
static Ipv4Address GetAny(void)
NS_LOG_COMPONENT_DEFINE("GrantedTimeWindowMpiInterface")
holds a vector of std::pair of Ptr and interface index.
Ptr< YansWifiChannel > Create(void) const
void SetRemoteStationManager(std::string type, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
hold variables of type string
Make it easy to create and manage PHY objects for the yans model.
virtual void SetType(std::string type, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
Helper class that adds DSR routing to nodes.
static void Run(void)
Run the simulation until one of:
void SetTypeId(TypeId tid)
aggregate IP/TCP/UDP functionality to existing Nodes.
A helper to make it easier to instantiate an ns3::PacketSinkApplication on a set of nodes...
Ptr< OutputStreamWrapper > CreateFileStream(std::string filename, std::ios::openmode filemode=std::ios::out)
Create and initialize an output stream object we'll use to write the traced bits. ...
static YansWifiPhyHelper Default(void)
Create a phy helper in a default working state.
helps to create WifiNetDevice objects
A helper to make it easier to instantiate an ns3::OnOffApplication on a set of nodes.
static void SetRun(uint64_t run)
Set the run number of simulation.
virtual NetDeviceContainer Install(const WifiPhyHelper &phy, const WifiMacHelper &mac, NodeContainer c) const
a polymophic address class
int main(int argc, char *argv[])
Class for representing data rates.
void SetChannel(Ptr< YansWifiChannel > channel)
void Install(Ptr< Node > node) const
"Layout" a single node according to the current position allocator type.
Ptr< Object > Create(void) const
Hold an unsigned integer type.
holds a vector of ns3::NetDevice pointers
virtual void SetStandard(enum WifiPhyStandard standard)
static NqosWifiMacHelper Default(void)
Create a mac helper in a default working state.
void Start(Time start)
Arrange for all of the Applications in this container to Start() at the Time given as a parameter...
create non QoS-enabled MAC layers for a ns3::WifiNetDevice.
Parse command-line arguments.
static void Destroy(void)
Every event scheduled by the Simulator::insertAtDestroy method is invoked.
void SetDefault(std::string name, const AttributeValue &value)
keep track of a set of node pointers.
DSSS PHY (Clause 15) and HR/DSSS PHY (Clause 18)
void SetMobilityModel(std::string type, std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue(), std::string n8="", const AttributeValue &v8=EmptyAttributeValue(), std::string n9="", const AttributeValue &v9=EmptyAttributeValue())
void Install(std::string nodeName) const
Aggregate implementations of the ns3::Ipv4, ns3::Ipv6, ns3::Udp, and ns3::Tcp classes onto the provid...
void Set(std::string name, const AttributeValue &value)
manage and create wifi channel objects for the yans model.
static void SetSeed(uint32_t seed)
set the seed it will duplicate the seed value 6 times
Helper class used to assign positions and mobility models to nodes.
instantiate subclasses of ns3::Object.
void Stop(Time stop)
Arrange for all of the Applications in this container to Stop() at the Time given as a parameter...
Ipv4InterfaceContainer Assign(const NetDeviceContainer &c)
Assign IP addresses to the net devices specified in the container based on the current network prefix...
hold objects of type ns3::DataRate
void AddValue(const std::string &name, const std::string &help, T &value)
Add a program argument, assigning to POD.
static void Stop(void)
If an event invokes this method, it will be the last event scheduled by the Simulator::run method bef...
Ptr< Node > Get(uint32_t i) const
Get the Ptr stored in this container at a given index.
ApplicationContainer Install(NodeContainer c) const
Install an ns3::PacketSinkApplication on each node of the input container configured with all the att...
void Parse(int argc, char *argv[])
Parse the program arguments.
A helper class to make life easier while doing simple IPv4 address assignment in scripts.
void EnableAsciiAll(std::string prefix)
Enable ascii trace output on each device (which is of the appropriate type) in the set of all nodes c...
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer.
void SetPropagationDelay(std::string name, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
Hold a floating point type.
void Install(DsrHelper &dsrHelper, NodeContainer nodes)
Ptr< T > GetObject(void) const
void SetAttribute(std::string name, const AttributeValue &value)
Helper function used to set the underlying application attributes.
void SetBase(Ipv4Address network, Ipv4Mask mask, Ipv4Address base="0.0.0.1")
Set the base network number, network mask and base address.
void LogComponentEnable(char const *name, enum LogLevel level)
Ipv4Address GetAddress(uint32_t i, uint32_t j=0) const
Allocate a set of positions.