Class Hierarchy

Go to the graphical class hierarchy

This inheritance list is sorted roughly, but not completely, alphabetically:

[detail level 1234567]

Cns3::AccessorTrait< T >	The non-const and non-reference type equivalent to T
Cns3::UanMacRcGw::AckData	Packet ACK data
Cns3::ofi::Action	Class for handling flow table actions
Cns3::WifiActionHeader::ActionValue	Typedef for union of different ActionValues
Cns3::Address	Polymophic address class
Cns3::AdhocAlohaNoackIdealPhyHelper	Create the AlohaNoackNetDevice
Cns3::Object::AggregateIterator	Iterate over the Objects aggregated to an ns3::Object
Cns3::Object::Aggregates	The list of Objects aggregated to this one
Cns3::dsr::DsrOptionHeader::Alignment	Alignment requirements of an option header
Cns3::Ipv6OptionHeader::Alignment	Alignment requirements of an option header
Cns3::LteEnbCmacSapProvider::AllocateNcRaPreambleReturnValue
Cns3::AllocationRetentionPriority	3GPP 23.203 Section 6.1.7.3 Allocation and Retention Priority characteristics
Cns3::Angles	Struct holding the azimuth and inclination angles of spherical coordinates
Cns3::AnimationInterface	Interface to network animator
Cns3::AnimationInterface::AnimPacketInfo
Cns3::AnimationInterface::AnimXmlElement
Cns3::LteRrcSap::AntennaInfoDedicated
CAodvExample	Test script
Cns3::ApplicationContainer	Holds a vector of ns3::Application pointers
CArray2D< T >
CArray3D< T >
Cns3::ArrayMatcher	Helper to test if an array entry matches a config path specification
Cns3::AsciiFile	A class representing an ascii file
Cns3::AsciiTraceHelper	Manage ASCII trace files for device models
►Cns3::AsciiTraceHelperForDevice	Base class providing common user-level ascii trace operations for helpers representing net devices
Cns3::CsmaHelper	Build a set of CsmaNetDevice objects
►Cns3::FdNetDeviceHelper	Build a set of FdNetDevice objects Normally we eschew multiple inheritance, however, the classes PcapUserHelperForDevice and AsciiTraceUserHelperForDevice are treated as "mixins"
►Cns3::EmuFdNetDeviceHelper	Build a set of FdNetDevice objects attached to a physical network interface
Cns3::PlanetLabFdNetDeviceHelper	Build a set of FdNetDevice objects attached to a virtual TAP network interface
Cns3::TapFdNetDeviceHelper	Build a set of FdNetDevice objects attached to a virtual TAP network interface
Cns3::LrWpanHelper	Helps to manage and create IEEE 802.15.4 NetDevice objects
Cns3::PointToPointHelper	Build a set of PointToPointNetDevice objects
Cns3::WimaxHelper	Helps to manage and create WimaxNetDevice objects
►Cns3::YansWifiPhyHelper	Make it easy to create and manage PHY objects for the yans model
Cns3::YansWavePhyHelper	To trace WaveNetDevice, we have to overwrite the trace functions of class YansWifiPhyHelper
►Cns3::AsciiTraceHelperForIpv4	Base class providing common user-level ascii trace operations for helpers representing IPv4 protocols
Cns3::InternetStackHelper	Aggregate IP/TCP/UDP functionality to existing Nodes
►Cns3::AsciiTraceHelperForIpv6	Base class providing common user-level ascii trace operations for helpers representing IPv6 protocols
Cns3::InternetStackHelper	Aggregate IP/TCP/UDP functionality to existing Nodes
Cns3::LteRrcSap::AsConfig
Cns3::olsr::MessageHeader::Hna::Association
Cns3::olsr::Association	Association
Cns3::olsr::AssociationTuple	An Association Tuple
Cns3::AthstatsHelper	Create AthstatsWifiTraceSink instances and connect them to wifi devices
Cns3::AttributeConstructionList	List of Attribute name, value and checker triples used to construct Objects
►Cns3::AttributeDefaultIterator
Cns3::ModelTypeidCreator
CAttributeDescriptor	Descriptor for an AttributeValue
Cns3::TypeId::AttributeInformation	Attribute implementation
►Cns3::AttributeIterator	This class is used internally by ConfigStore and GtkConfigStore
Cns3::ModelCreator
Cns3::Average< T >	Simple average, min, max and std
Cns3::Average< double >
Cns3::Backoff	The backoff class is used for calculating backoff times when many net devices can write to the same channel
Cns3::BandInfo	The building block of a SpectrumModel
Cns3::Bar	Block Ack Request
CTypeTraits< T >::Base< U >	Base type, after removing &, * and const
CTypeTraits< T >::Base< const U >	Base type, after removing const
CTypeTraits< T >::Base< U & >	Base type, after removing &
CTypeTraits< T >::Base< U * >	Base type, after removing *
CBasicEnergyDepletionTest	Test case of energy depletion handling for BasicEnergySource and WifiRadioEnergyModel
CBasicEnergyUpdateTest	Test case of update remaining energy for BasicEnergySource and WifiRadioEnergyModel
CBatteryLifetimeTest	This example was originally devised as a test, then it was converted to an example
Cns3::dot11s::PeerManagementProtocol::BeaconInfo	Keeps information about beacon of peer station: beacon interval, association ID, last time we have received a beacon
Cns3::EpcS11SapMme::BearerContextCreated	3GPP TS 29.274 version 8.3.1 Release 8 section 8.28
Cns3::EpcS11SapMme::BearerContextRemoved
Cns3::EpcS11SapSgw::BearerContextRemovedSgwPgw
Cns3::EpcS11SapSgw::BearerContextToBeCreated
Cns3::EpcS11SapSgw::BearerContextToBeRemoved
CLteX2HandoverMeasuresTestCase::BearerData
CLteX2HandoverTestCase::BearerData
Cns3::EpcMme::BearerInfo	Hold info on an EPS bearer to be activated
CBearerTestData
Cns3::EpcUeNas::BearerToBeActivated
Cns3::EpcEnbS1SapProvider::BearerToBeSwitched
CBench
►CBin
Cvisualizer.higcontainer.HIGContainer
►Cbinary_function
Cns3::SortProcess
Cns3::SortProcessPtr
Cns3::LteRrcSap::BlackCellsToAddMod
Cns3::dsr::BlackList	BlackList description
►Cns3::BlockAckAgreement	Maintains information for a block ack agreement
Cns3::OriginatorBlockAckAgreement	Maintains the state and information about transmitted MPDUs with ack policy block ack for an originator station
Cns3::BlockAckCache
Cns3::BlockAckManager	Manages all block ack agreements for an originator station
Cns3::Box	3d box
Cns3::BridgeHelper	Add capability to bridge multiple LAN segments (IEEE 802.1D bridging)
Cns3::BriteTopologyHelper::BriteEdgeInfo	Edge information from BRITE
Cns3::BriteTopologyHelper::BriteNodeInfo	Node information from BRITE
Cns3::BriteTopologyHelper	Interface with BRITE, the Boston university Representative Internet Topology gEnerator
Cns3::Buffer	Automatically resized byte buffer
Cns3::BufferSizeLevelBsr
Cns3::BuildBroadcastListElement_s	See section 4.3.11 buildBroadcastListElement
Cns3::BuildDataListElement_s	See section 4.3.8 builDataListElement
Cns3::BuildingContainer	Keep track of a set of building pointers
CBuildingData	Data to construct a Building object
Cns3::BuildingList
Cns3::BuildingsHelper
Cns3::BuildRarListElement_s	See section 4.3.10 buildRARListElement
Cns3::BulkSendHelper	A helper to make it easier to instantiate an ns3::BulkSendApplication on a set of nodes
Cns3::BwPart_s	See section 4.3.28 bwPart
Cns3::ByteTagIterator	Iterator over the set of byte tags in a packet
Cns3::ByteTagList	Keep track of the byte tags stored in a packet
Cns3::ByteTagListData	Internal representation of the byte tags stored in a packet
Ccairo_int128_t
Ccairo_quorem128_t
Ccairo_quorem64_t
Ccairo_uquorem128_t
Ccairo_uquorem64_t
►Cns3::CallbackBase	Base class for Callback class
Cns3::Callback< bool, ns3::Ptr< const ns3::Packet >, const ns3::Address &, uint32_t, uint32_t >
Cns3::Callback< bool, ns3::Ptr< ns3::Socket >, const ns3::Address & >
Cns3::Callback< bool, Ptr< NetDevice >, Ptr< const Packet >, uint16_t, const Address & >
Cns3::Callback< bool, Ptr< NetDevice >, Ptr< const Packet >, uint16_t, const Address &, const Address &, enum PacketType >
Cns3::Callback< bool, Ptr< Packet > >
Cns3::Callback< bool, Ptr< Packet >, const Address &, const Address &, uint16_t >
Cns3::Callback< bool, std::string >
Cns3::Callback< ns3::ObjectBase * >
Cns3::Callback< std::vector< ns3::Mac48Address >, uint32_t >
Cns3::Callback< uint32_t, ns3::Mac48Address, ns3::Ptr< ns3::MeshWifiInterfaceMac > >
Cns3::Callback< void >
Cns3::Callback< void, bool, uint64_t >
Cns3::Callback< void, const ns3::dsr::DsrOptionSRHeader &, empty, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, const ns3::Ipv4Header &, ns3::Ptr< const ns3::Packet >, DropReason, ns3::Ptr< ns3::Ipv4 >, uint32_t, empty, empty, empty >
Cns3::Callback< void, const ns3::Ipv4Header &, ns3::Ptr< const ns3::Packet >, uint32_t, empty, empty, empty, empty, empty >
Cns3::Callback< void, const ns3::Ipv6Header &, ns3::Ptr< const ns3::Packet >, DropReason, ns3::Ptr< ns3::Ipv6 >, uint32_t, empty, empty, empty >
Cns3::Callback< void, const ns3::Ipv6Header &, ns3::Ptr< const ns3::Packet >, uint32_t, empty, empty, empty, empty, empty >
Cns3::Callback< void, const ns3::olsr::PacketHeader &, const MessageList &, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, const ns3::WifiMacHeader &, empty, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, const WifiMacHeader & >
Cns3::Callback< void, DlInfoListElement_s >
Cns3::Callback< void, double >
Cns3::Callback< void, double, double, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, DropReason, ns3::Ptr< const ns3::Packet >, ns3::Ptr< ns3::SixLowPanNetDevice >, uint32_t, empty, empty, empty, empty >
Cns3::Callback< void, int >
Cns3::Callback< void, int8_t >
Cns3::Callback< void, LrWpanMacState >
Cns3::Callback< void, LrWpanMacState, LrWpanMacState, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, LrWpanPhyEnumeration >
Cns3::Callback< void, LrWpanPhyEnumeration, LrWpanPhyEnumeration, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, LrWpanPhyEnumeration, LrWpanPibAttributeIdentifier >
Cns3::Callback< void, LrWpanPhyEnumeration, LrWpanPibAttributeIdentifier, LrWpanPhyPibAttributes * >
Cns3::Callback< void, LrWpanPhyEnumeration, uint8_t >
Cns3::Callback< void, Mac48Address, Mac48Address, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, McpsDataConfirmParams >
Cns3::Callback< void, McpsDataIndicationParams, Ptr< Packet > >
Cns3::Callback< void, ns3::Address, ns3::Address, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ipv4Address >
Cns3::Callback< void, ns3::Ipv4Address, uint8_t >
Cns3::Callback< void, ns3::Ipv4Address, uint8_t, uint8_t, uint8_t, uint32_t >
Cns3::Callback< void, ns3::Ipv6Address, uint8_t, uint8_t, uint8_t, uint32_t >
Cns3::Callback< void, ns3::Mac48Address, empty, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Mac48Address, ns3::Mac48Address, uint32_t, bool >
Cns3::Callback< void, ns3::Mac48Address, uint8_t >
Cns3::Callback< void, ns3::Mac48Address, uint8_t, bool >
Cns3::Callback< void, ns3::PhyReceptionStatParameters, empty, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::PhyTransmissionStatParameters, empty, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::ArpCache >, ns3::Ipv4Address >
Cns3::Callback< void, ns3::Ptr< const ns3::MobilityModel >, empty, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, const ns3::Address &, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, const ns3::Mac48Address &, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, double, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, double, ns3::UanTxMode, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, double, ns3::WifiMode, enum WifiPreamble, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, empty, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, ns3::Mac48Address, const ns3::Cid &, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, ns3::Mac48Address, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, ns3::Mac48Address, ns3::Cid, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, ns3::Ptr< ns3::Ipv4 >, uint32_t, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, ns3::Ptr< ns3::Ipv6 >, uint32_t, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, ns3::Ptr< ns3::NetDevice >, ns3::Ptr< ns3::NetDevice >, ns3::Time, ns3::Time, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, ns3::Ptr< ns3::SixLowPanNetDevice >, uint32_t, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, ns3::UanAddress, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, ns3::UanTxMode, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, ns3::WifiMode, WifiPreamble, uint8_t, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, uint16_t, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, uint16_t, uint16_t, uint32_t, WifiPreamble, ns3::WifiTxVector, struct ns3::mpduInfo, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, uint16_t, uint16_t, uint32_t, WifiPreamble, ns3::WifiTxVector, struct ns3::mpduInfo, struct ns3::signalNoiseDbm >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, uint32_t, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::Packet >, uint8_t, uint8_t, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::PacketBurst > >
Cns3::Callback< void, ns3::Ptr< const ns3::PacketBurst >, empty, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::PacketBurst >, ns3::Mac48Address, const ns3::Cid &, ns3::WimaxPhy::ModulationType, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< const ns3::SpectrumValue >, empty, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< ns3::Packet > >
Cns3::Callback< void, ns3::Ptr< ns3::Packet >, const ns3::UanAddress & >
Cns3::Callback< void, ns3::Ptr< ns3::Packet >, ns3::Ipv4Header, uint16_t, ns3::Ptr< ns3::Ipv4Interface > >
Cns3::Callback< void, ns3::Ptr< ns3::Packet >, ns3::Ipv6Header, uint16_t, ns3::Ptr< ns3::Ipv6Interface > >
Cns3::Callback< void, ns3::Ptr< ns3::PacketBurst >, empty, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Ptr< ns3::Socket > >
Cns3::Callback< void, ns3::Ptr< ns3::Socket >, const ns3::Address & >
Cns3::Callback< void, ns3::Ptr< ns3::Socket >, uint32_t >
Cns3::Callback< void, ns3::Ptr< ns3::SpectrumPhy >, ns3::Ptr< ns3::SpectrumPhy >, double, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::SequenceNumber, ns3::SequenceNumber, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Time, empty, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Time, LrWpanPhyEnumeration, LrWpanPhyEnumeration, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Time, ns3::Time, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Time, ns3::Time, enum ns3::WifiPhy::State, empty, empty, empty, empty, empty >
Cns3::Callback< void, ns3::Time, ns3::Time, uint32_t, uint32_t, double, uint32_t, double, empty >
Cns3::Callback< void, ns3::WifiMacHeader const & >
Cns3::Callback< void, Ptr< const Packet > >
Cns3::Callback< void, Ptr< const Packet >, double >
Cns3::Callback< void, Ptr< NetDevice >, Ptr< const Packet >, uint16_t, const Address &, const Address &, NetDevice::PacketType >
Cns3::Callback< void, Ptr< Packet > >
Cns3::Callback< void, Ptr< Packet >, const WifiMacHeader * >
Cns3::Callback< void, Ptr< Packet >, double, WifiTxVector, enum WifiPreamble >
Cns3::Callback< void, Ptr< Packet >, Ipv4Address, Ipv4Address, uint8_t, Ptr< Ipv4Route > >
Cns3::Callback< void, Ptr< Packet >, Ipv6Address, Ipv6Address, uint8_t, Ptr< Ipv6Route > >
Cns3::Callback< void, Ptr< Packet >, Mac48Address, Mac48Address >
Cns3::Callback< void, State, State, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, std::list< Ptr< LteControlMessage > > >
Cns3::Callback< void, T, T, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, T1, T2, T3, T4, T5, T6, T7, T8 >
Cns3::Callback< void, TcpStates_t, TcpStates_t, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, uint16_t, ns3::Ptr< ns3::SpectrumValue >, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, uint16_t, Ptr< SpectrumValue > >
Cns3::Callback< void, uint16_t, uint16_t, double, double, bool, empty, empty, empty >
Cns3::Callback< void, uint16_t, uint16_t, double, double, empty, empty, empty, empty >
Cns3::Callback< void, uint16_t, uint16_t, double, empty, empty, empty, empty, empty >
Cns3::Callback< void, uint16_t, uint16_t, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, uint16_t, uint16_t, State, State, empty, empty, empty, empty >
Cns3::Callback< void, uint16_t, uint8_t, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, uint16_t, uint8_t, uint32_t, empty, empty, empty, empty, empty >
Cns3::Callback< void, uint16_t, uint8_t, uint32_t, uint64_t, empty, empty, empty, empty >
Cns3::Callback< void, uint32_t, empty, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, uint32_t, Mac48Address, Mac48Address, PeerLink::PeerState, PeerLink::PeerState >
Cns3::Callback< void, uint32_t, ns3::Mac48Address, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, uint32_t, Ptr< Packet >, uint8_t >
Cns3::Callback< void, uint32_t, uint32_t, uint16_t, uint8_t, uint16_t, empty, empty, empty >
Cns3::Callback< void, uint32_t, uint32_t, uint16_t, uint8_t, uint16_t, uint8_t, uint16_t, empty >
Cns3::Callback< void, uint64_t, uint16_t, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, uint64_t, uint16_t, uint16_t, empty, empty, empty, empty, empty >
Cns3::Callback< void, uint64_t, uint16_t, uint16_t, ns3::LteRrcSap::MeasurementReport, empty, empty, empty, empty >
Cns3::Callback< void, uint64_t, uint16_t, uint16_t, State, State, empty, empty, empty >
Cns3::Callback< void, uint64_t, uint16_t, uint16_t, uint16_t, empty, empty, empty, empty >
Cns3::Callback< void, uint8_t *, ssize_t >
Cns3::Callback< void, uint8_t, ns3::Mac48Address, empty, empty, empty, empty, empty, empty >
Cns3::Callback< void, UlInfoListElement_s >
Cns3::Callback< R, T1, T2, T3, T4, T5, T6, T7, T8, T9 >	Callback template class
►CCallbackTestParent
CCallbackTestClass
Cns3::CallbackTraits< T >	Trait class to convert a pointer into a reference, used by MemPtrCallBackImpl
Cns3::CallbackTraits< Ptr< T > >	Trait class to convert a pointer into a reference, used by MemPtrCallBackImpl
Cns3::CallbackTraits< T * >	Trait class to convert a pointer into a reference, used by MemPtrCallBackImpl
Cns3::CandidateQueue	A Candidate Queue used in static routing
Cns3::CapabilityInformation	Capability information
Cns3::LteRrcSap::CarrierBandwidthEutra
Cns3::LteRrcSap::CarrierFreqEutra
Cns3::LteRrcSap::CellAccessRelatedInfo
Cns3::RadioBearerStatsConnector::CellIdRnti	Struct used as key in m_ueManagerPathByCellIdRnti map
Cns3::EpcX2Sap::CellInformationItem	Cell Information Item as it is used in the LOAD INFORMATION message
Cns3::EpcX2Sap::CellMeasurementResultItem	Cell Measurement Result Item as it is used in the RESOURCE STATUS UPDATE message
Cns3::LteRrcSap::CellSelectionInfo
Cns3::LteRrcSap::CellsToAddMod
Cns3::LteRrcSap::CgiInfo
Cns3::ChannelList	List of simulation channels
CCheckPointEvent
Cns3::Cid
Cns3::CidFactory	This class is used exclusively by the BS to allocate CIDs to new connections
Cns3::dsr::CloseNeighbor
Cns3::aodv::CloseNeighbor
Cns3::Hash::Example::Collider	Keep track of collisions
CCollisionExperiment
Cgrid.Color
Cgrid.Colors
Cns3::CommandLine	Parse command-line arguments
Cns3::LteUeRrcSapProvider::CompleteSetupParameters
Cns3::LteEnbRrcSapProvider::CompleteSetupUeParameters
Cns3::EpcX2Sap::CompositeAvailCapacity	Composite Available Capacity as it is used in the RESOURCE STATUS UPDATE message
CConfigStoreHelper	Simplifies config-store raw text load and save
Cns3::ConstantVelocityHelper	Utility class used to move node with constant velocity
Canonymous_namespace{wifi-phy.cc}::Constructor
Cns3::CqasFlowPerf_t
Cns3::CqiConfig_s	See section 4.3.19 cqiConfig
Cns3::CqiListElement_s	See section 4.3.24 cqiListElement
Cns3::CriticalSection	A class which provides a simple way to implement a Critical Section
Cns3::FfMacCschedSapUser::CschedCellConfigCnfParameters	Parameters of the API primitives
Cns3::FfMacCschedSapProvider::CschedCellConfigReqParameters	Parameters of the API primitives
Cns3::FfMacCschedSapUser::CschedCellConfigUpdateIndParameters	Parameters of the CSCHED_CELL_CONFIG_UPDATE_IND primitive
Cns3::FfMacCschedSapUser::CschedLcConfigCnfParameters	Parameters of the CSCHED_LC_CONFIG_CNF primitive
Cns3::FfMacCschedSapProvider::CschedLcConfigReqParameters	Parameters of the CSCHED_LC_CONFIG_REQ primitive
Cns3::FfMacCschedSapUser::CschedLcReleaseCnfParameters	Parameters of the CSCHED_LC_RELEASE_CNF primitive
Cns3::FfMacCschedSapProvider::CschedLcReleaseReqParameters	Parameters of the CSCHED_LC_RELEASE_REQ primitive
Cns3::FfMacCschedSapUser::CschedUeConfigCnfParameters	Parameters of the CSCHED_UE_CONFIG_CNF primitive
Cns3::FfMacCschedSapProvider::CschedUeConfigReqParameters	Parameters of the CSCHED_UE_CONFIG_REQ primitive
Cns3::FfMacCschedSapUser::CschedUeConfigUpdateIndParameters	Parameters of the CSCHED_UE_CONFIG_UPDATE_IND primitive
Cns3::FfMacCschedSapUser::CschedUeReleaseCnfParameters	Parameters of the CSCHED_UE_RELEASE_CNF primitive
Cns3::FfMacCschedSapProvider::CschedUeReleaseReqParameters	Parameters of the CSCHED_UE_RELEASE_REQ primitive
Cns3::CsmaDeviceRec	CsmaNetDevice Record
Cns3::CsmaStarHelper	A helper to make it easier to create a star topology with Csma links
Cns3::CsParameters
CNs3TcpCwndTestCase1::CwndEvent
CNs3TcpCwndTestCase2::CwndEvent
Cns3::PacketMetadata::Data	Data structure
Cns3::FdReader::Data	A structure representing data read
►Cns3::GnuplotDataset::Data	Structure storing the data to plot
Cns3::Gnuplot2dDataset::Data2d	Structure storing the data to for a 2D plot
Cns3::Gnuplot2dFunction::Function2d	Structure storing the function to be used for a 2D plot
Cns3::Gnuplot3dDataset::Data3d	Structure storing the data for a 3D plot
Cns3::Gnuplot3dFunction::Function3d	Structure storing the function to be used for a 3D plot
Cns3::Ipv4RawSocketImpl::Data	IPv4 raw data and additional information
Cns3::Ipv6RawSocketImpl::Data	IPv6 raw data and additional information
Cns3::Buffer::Data	This data structure is variable-sized through its last member whose size is determined at allocation time and stored in the m_size field
►Cns3::DataOutputCallback	Callback class for the DataOutput classes
Cns3::OmnetDataOutput::OmnetOutputCallback	Class to generate OMNeT output
Cns3::SqliteDataOutput::SqliteOutputCallback	Class to generate OMNeT output
Cns3::EpcEnbS1SapUser::DataRadioBearerSetupRequestParameters	Parameters passed to DataRadioBearerSetupRequest ()
Cgrid.DataRange
Cns3::DataRate	Class for representing data rates
►Cns3::DcdChannelEncodings	This class implements the DCD channel encodings as described by "IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems" 11.4.1 DCD channel encodings, page 659
Cns3::OfdmDcdChannelEncodings
Cns3::DcfManager	Manage a set of ns3::DcfStateHandle a set of independent ns3::DcfState, each of which represents a single DCF within a MAC stack
►Cns3::DcfState	Keep track of the state needed for a single DCF function
CDcfStateTest
Cns3::DcaTxop::Dcf
Cns3::EdcaTxopN::Dcf
Cns3::DefaultDeleter< T >	A template used to delete objects by the ns3::SimpleRefCount templates when the last reference to an object they manage disappears
Cns3::DelayJitterEstimation	Quick and dirty delay and jitter estimation
Cns3::DestinationPoint	Keeps last movement schedule
Cns3::DeviceEnergyModelContainer	Holds a vector of ns3::DeviceEnergyModel pointers
►Cns3::DeviceEnergyModelHelper	Creates DeviceEnergyModel objects
Cns3::AcousticModemEnergyModelHelper	Assign AcousticModemEnergyModel to uan devices
Cns3::WifiRadioEnergyModelHelper	Assign WifiRadioEnergyModel to wifi devices
Cns3::Hash::Example::DictFiles	Source word list files
Cns3::Hash::Example::Dictionary	Word list and hashers to test
Cns3::DlDciListElement_s	See section 4.3.1 dlDciListElement
Cns3::DlFramePrefixIe	This class implements the DL Frame Prefix IE as described by IEEE-802.16 standard
Cns3::DlInfoListElement_s	See section 4.3.23 dlInfoListElement
Cns3::dot11s::Dot11sMeshCapability	See 7.3.2.86.7 in 802.11s draft 3.0
Cns3::DoubleChecker	AttributeChecker implementation for DoubleValue
►CDrawingArea
Cgrid.GtkGraphicRenderer
Cns3::LteRrcSap::DrbToAddMod
Cns3::DrxConfig_s	See section 4.3.16 drxConfig
CDsdvManetExample
CDsrHeader	Header for Dsr Routing
Cns3::DsrHelper
Cns3::DsrMainHelper	Helper class that adds DSR routing to nodes
Cns3::dsr::DsrNetworkQueueEntry	DSR Network Queue Entry
►Cns3::dsr::DsrOptionField
Cns3::dsr::DsrRoutingHeader	Header of Dsr Routing
CDsrOptionRouteRequestHeader	Header of Dsr Option Route Request
Cns3::DsrRoutingHeader	Introspection did not find any typical Config paths
Cns3::DsssErrorRateModel	Implementation of DSSS error rate modelThe 802.11b modulations:
Cns3::aodv::DuplicatePacketDetection	Helper class used to remember already seen packets and detect duplicates
Cns3::olsr::DuplicateTuple	The type "list of interface addresses"
Cns3::EdcaParameter
►Cns3::empty	Make Callback use a separate empty type
►Cns3::SimpleRefCount< AttributeAccessor >
►Cns3::AttributeAccessor	Allow setting and getting the value of an attribute
Cns3::AccessorHelper< T, U >	Basic functionality for accessing class attributes via class data members, or get functor/set methods
Cns3::NscStackStringAccessor	This object represent the underlying nsc stack attributes and provide a ns-3-like system to access them though sysctls
Cns3::ObjectPtrContainerAccessor	AttributeAccessor implementation for ObjectPtrContainerValue
►Cns3::SimpleRefCount< AttributeChecker >
►Cns3::AttributeChecker	Represent the type of an attribute
Cns3::AddressChecker	AttributeChecker implementation for AddressValue
Cns3::BooleanChecker	AttributeChecker implementation for BooleanValue
Cns3::BoxChecker	AttributeChecker implementation for BoxValue
Cns3::CallbackChecker	AttributeChecker implementation for CallbackValue
Cns3::DataRateChecker	AttributeChecker implementation for DataRateValue
Cns3::dot11s::IeMeshIdChecker
Cns3::EnumChecker	AttributeChecker implementation for EnumValue
Cns3::HtCapabilitiesChecker	AttributeChecker implementation for HtCapabilitiesValue
Cns3::Ipv4AddressChecker	AttributeChecker implementation for Ipv4AddressValue
Cns3::Ipv4MaskChecker	AttributeChecker implementation for Ipv4MaskValue
Cns3::Ipv6AddressChecker	AttributeChecker implementation for Ipv6AddressValue
Cns3::Ipv6PrefixChecker	AttributeChecker implementation for Ipv6PrefixValue
Cns3::Mac16AddressChecker	AttributeChecker implementation for Mac16AddressValue
Cns3::Mac48AddressChecker	AttributeChecker implementation for Mac48AddressValue
Cns3::Mac64AddressChecker	AttributeChecker implementation for Mac64AddressValue
Cns3::ObjectFactoryChecker	AttributeChecker implementation for ObjectFactoryValue
►Cns3::ObjectPtrContainerChecker	AttributeChecker implementation for ObjectPtrContainerValue
Cns3::internal::ObjectPtrContainerChecker< T >	ObjectPtrContainerChecker implementation class
Cns3::OrganizationIdentifierChecker	AttributeChecker implementation for OrganizationIdentifierValue
►Cns3::PointerChecker	AttributeChecker implementation for PointerValue
Cns3::internal::PointerChecker< T >	PointerChecker implementation
Cns3::RectangleChecker	AttributeChecker implementation for RectangleValue
Cns3::SsidChecker	AttributeChecker implementation for SsidValue
Cns3::StringChecker	AttributeChecker implementation for StringValue
Cns3::TypeIdChecker	AttributeChecker implementation for TypeIdValue
Cns3::UanModesListChecker	AttributeChecker implementation for UanModesListValue
Cns3::Vector2DChecker	AttributeChecker implementation for Vector2DValue
Cns3::Vector3DChecker	AttributeChecker implementation for Vector3DValue
Cns3::VhtCapabilitiesChecker
Cns3::WaypointChecker	AttributeChecker implementation for WaypointValue
Cns3::WifiModeChecker	AttributeChecker implementation for WifiModeValue
CValueClassTestChecker
►Cns3::SimpleRefCount< AttributeValue >
►Cns3::AttributeValue	Hold a value for an Attribute
Cns3::AddressValue	AttributeValue implementation for Address
Cns3::BooleanValue	AttributeValue implementation for Boolean
Cns3::BoxValue	AttributeValue implementation for Box
Cns3::CallbackValue	AttributeValue implementation for Callback
Cns3::DataRateValue	AttributeValue implementation for DataRate
Cns3::dot11s::IeMeshIdValue
Cns3::DoubleValue	This class can be used to hold variables of floating point type such as 'double' or 'float'
Cns3::EmptyAttributeValue	A class for an empty attribute value
Cns3::EnumValue	Hold variables of type enum
Cns3::HtCapabilitiesValue	AttributeValue implementation for HtCapabilities
Cns3::IntegerValue	Hold a signed integer type
Cns3::Ipv4AddressValue	AttributeValue implementation for Ipv4Address
Cns3::Ipv4MaskValue	AttributeValue implementation for Ipv4Mask
Cns3::Ipv6AddressValue	AttributeValue implementation for Ipv6Address
Cns3::Ipv6PrefixValue	AttributeValue implementation for Ipv6Prefix
Cns3::Mac16AddressValue	AttributeValue implementation for Mac16Address
Cns3::Mac48AddressValue	AttributeValue implementation for Mac48Address
Cns3::Mac64AddressValue	AttributeValue implementation for Mac64Address
Cns3::ObjectFactoryValue	AttributeValue implementation for ObjectFactory
Cns3::ObjectPtrContainerValue	Container for a set of ns3::Object pointers
Cns3::OrganizationIdentifierValue	AttributeValue implementation for OrganizationIdentifier
Cns3::PointerValue	Hold objects of type Ptr<T>
Cns3::RectangleValue	AttributeValue implementation for Rectangle
Cns3::SsidValue	AttributeValue implementation for Ssid
Cns3::StringValue	Hold variables of type string
Cns3::TimeValue	AttributeValue implementation for Time
Cns3::TypeIdValue	AttributeValue implementation for TypeId
Cns3::UanModesListValue	AttributeValue implementation for UanModesList
Cns3::UintegerValue	Hold an unsigned integer type
Cns3::Vector2DValue	AttributeValue implementation for Vector2D
Cns3::Vector3DValue	AttributeValue implementation for Vector3D
Cns3::VhtCapabilitiesValue
Cns3::WaypointValue	AttributeValue implementation for Waypoint
Cns3::WifiModeValue	AttributeValue implementation for WifiMode
CValueClassTestValue
►Cns3::SimpleRefCount< BoundCallbackArgument >
Cns3::BoundCallbackArgument	This structure is used as interface between trace sources and RadioBearerStatsCalculator
►Cns3::SimpleRefCount< CallbackImplBase >
►Cns3::CallbackImplBase	Abstract base class for CallbackImpl Provides reference counting and equality test
►Cns3::CallbackImpl< R, T1, T2, T3, T4, T5, T6, T7, T8, T9 >	The unqualified CallbackImpl class
Cns3::FunctorCallbackImpl< T, R, T1, T2, T3, T4, T5, T6, T7, T8, T9 >	CallbackImpl with functors
Cns3::MemPtrCallbackImpl< OBJ_PTR, MEM_PTR, R, T1, T2, T3, T4, T5, T6, T7, T8, T9 >	CallbackImpl for pointer to member functions
Cns3::CallbackImpl< R, empty, empty, empty, empty, empty, empty, empty, empty, empty >	CallbackImpl classes with varying numbers of argument types
Cns3::CallbackImpl< R, T1, empty, empty, empty, empty, empty, empty, empty, empty >	CallbackImpl class with one argument
Cns3::CallbackImpl< R, T1, T2, empty, empty, empty, empty, empty, empty, empty >	CallbackImpl class with two arguments
Cns3::CallbackImpl< R, T1, T2, T3, empty, empty, empty, empty, empty, empty >	CallbackImpl class with three arguments
Cns3::CallbackImpl< R, T1, T2, T3, T4, empty, empty, empty, empty, empty >	CallbackImpl class with four arguments
Cns3::CallbackImpl< R, T1, T2, T3, T4, T5, empty, empty, empty, empty >	CallbackImpl class with five arguments
►Cns3::CallbackImpl< R, T1, T2, T3, T4, T5, T6, empty, empty, empty >	CallbackImpl class with six arguments
Cns3::ThreeBoundFunctorCallbackImpl< T, R, TX1, TX2, TX3, T1, T2, T3, T4, T5, T6 >	CallbackImpl for functors with first three arguments bound at construction
►Cns3::CallbackImpl< R, T1, T2, T3, T4, T5, T6, T7, empty, empty >	CallbackImpl class with seven arguments
Cns3::TwoBoundFunctorCallbackImpl< T, R, TX1, TX2, T1, T2, T3, T4, T5, T6, T7 >	CallbackImpl for functors with first two arguments bound at construction
►Cns3::CallbackImpl< R, T1, T2, T3, T4, T5, T6, T7, T8, empty >	CallbackImpl class with eight arguments
Cns3::BoundFunctorCallbackImpl< T, R, TX, T1, T2, T3, T4, T5, T6, T7, T8 >	CallbackImpl for functors with first argument bound at construction
►Cns3::SimpleRefCount< ChannelCoordinationListener >
►Cns3::ChannelCoordinationListener	Receive notifications about channel coordination events
CCoordinationTestListener
Cns3::CoordinationListener
►Cns3::SimpleRefCount< DestinationAddressUnit >
Cns3::dot11s::DestinationAddressUnit	Describes an address unit in PREQ information element See 7.3.2.96 for more details
►Cns3::SimpleRefCount< DrbActivator >
Cns3::DrbActivator	DrbActivatior allows user to activate bearers for UEs when EPC is not used
►Cns3::SimpleRefCount< EnbInfo >
Cns3::EpcMme::EnbInfo	Hold info on a ENB
►Cns3::SimpleRefCount< EpcTft >
Cns3::EpcTft	This class implements the EPS bearer Traffic Flow Template (TFT), which is the set of all packet filters associated with an EPS bearer
►Cns3::SimpleRefCount< EpcTftClassifier >
Cns3::EpcTftClassifier	Classifies IP packets accoding to Traffic Flow Templates (TFTs)
►Cns3::SimpleRefCount< EventImpl >
Cns3::EventImpl	A simulation event
►Cns3::SimpleRefCount< FdReader >
►Cns3::FdReader	A class that asynchronously reads from a file descriptor
Cns3::FdNetDeviceFdReader	This class performs the actual data reading from the sockets
Cns3::TapBridgeFdReader	Class to perform the actual reading from a socket
►Cns3::SimpleRefCount< FlowClassifier >
►Cns3::FlowClassifier	Provides a method to translate raw packet data into abstract flow identifier and packet identifier parameters
Cns3::Ipv4FlowClassifier	Classifies packets by looking at their IP and TCP/UDP headers
Cns3::Ipv6FlowClassifier	Classifies packets by looking at their IP and TCP/UDP headers
►Cns3::SimpleRefCount< Fragments >
Cns3::Ipv4L3Protocol::Fragments	A Set of Fragment belonging to the same packet (src, dst, identification and proto)
Cns3::Ipv6ExtensionFragment::Fragments	A Set of Fragment
Cns3::SixLowPanNetDevice::Fragments	A Set of Fragment
►Cns3::SimpleRefCount< IeBeaconTimingUnit >
Cns3::dot11s::IeBeaconTimingUnit	Describes one unit of beacon timing element
►Cns3::SimpleRefCount< Implementation >
►Cns3::Hash::Implementation	Hash function implementation base class
Cns3::Hash::Function::Fnv1a	Fnv1a hash function implementation
Cns3::Hash::Function::Hash32	Template for creating a Hash::Implementation from a 32-bit hash function
Cns3::Hash::Function::Hash64	Template for creating a Hash::Implemetation from a 64-bit hash function
Cns3::Hash::Function::Murmur3	Murmur3 hash function implementation
►Cns3::SimpleRefCount< InterferenceHelper::Event >
Cns3::InterferenceHelper::Event	Signal event for a packet
►Cns3::SimpleRefCount< Ipv4MulticastRoute >
Cns3::Ipv4MulticastRoute	Ipv4 multicast route cache entry (similar to Linux struct mfc_cache)
►Cns3::SimpleRefCount< Ipv4Route >
Cns3::Ipv4Route	Ipv4 route cache entry (similar to Linux struct rtable)
►Cns3::SimpleRefCount< Ipv6MulticastRoute >
Cns3::Ipv6MulticastRoute	IPv6 multicast route entry
►Cns3::SimpleRefCount< Ipv6Route >
Cns3::Ipv6Route	IPv6 route cache entry
►Cns3::SimpleRefCount< LrWpanInterferenceHelper >
Cns3::LrWpanInterferenceHelper	This class provides helper functions for LrWpan interference handling
►Cns3::SimpleRefCount< LteChunkProcessor >
Cns3::LteChunkProcessor	This abstract class is used to process the time-vs-frequency SINR/interference/power chunk of a received LTE signal which was calculated by the LteInterference object
►Cns3::SimpleRefCount< LteControlMessage >
►Cns3::LteControlMessage	The LteControlMessage provides a basic implementations for control messages (such as PDCCH allocation map, CQI feedbacks) that are exchanged among eNodeB and UEs
Cns3::BsrLteControlMessage	The uplink BsrLteControlMessage defines the specific extension of the CE element for reporting the buffer status report
Cns3::DlCqiLteControlMessage	The downlink CqiLteControlMessage defines an ideal list of feedback about the channel quality sent by the UE to the eNodeB
Cns3::DlDciLteControlMessage	The Downlink Data Control Indicator messages defines the RB allocation for the users in the downlink
Cns3::DlHarqFeedbackLteControlMessage	The downlink DlHarqFeedbackLteControlMessage defines the specific messages for transmitting the DL HARQ feedback through PUCCH
Cns3::MibLteControlMessage	Abstract model for broadcasting the Master Information Block (MIB) within the control channel (BCCH)
Cns3::RachPreambleLteControlMessage	Abstract model for the Random Access Preamble
Cns3::RarLteControlMessage	Abstract model for the MAC Random Access Response message
Cns3::Sib1LteControlMessage	Abstract model for broadcasting the System Information Block Type 1 (SIB1) within the control channel (BCCH)
Cns3::UlDciLteControlMessage	The Uplink Data Control Indicator messages defines the RB allocation for the users in the uplink
►Cns3::SimpleRefCount< LteHarqPhy >
Cns3::LteHarqPhy	Implements the HARQ functionalities related to PHY layer (i.e., decodification buffers for incremental redundancy managment)
►Cns3::SimpleRefCount< MeshWifiInterfaceMacPlugin >
►Cns3::MeshWifiInterfaceMacPlugin	Common interface for mesh point interface MAC plugins
Cns3::dot11s::HwmpProtocolMac	Interface MAC plugin for HWMP – 802.11s routing protocol
Cns3::dot11s::PeerManagementProtocolMac	This is plugin to Mesh WiFi MAC, which implements interface to dot11s peer management protocol: it takes proper frames from MAC-layer, extracts peer link management information element and mesh configuration element and passes it to main part of protocol
Cns3::flame::FlameProtocolMac	Interface MAC plugin FLAME routing protocol
►Cns3::SimpleRefCount< NixVector >
Cns3::NixVector	Neighbor-index data structure for nix-vector routing
►Cns3::SimpleRefCount< OutputStreamWrapper >
Cns3::OutputStreamWrapper	A class encapsulating an output stream
►Cns3::SimpleRefCount< Packet >
Cns3::Packet	Network packets
►Cns3::SimpleRefCount< PbbAddressBlock >
►Cns3::PbbAddressBlock	An Address Block and its associated Address TLV Blocks
Cns3::PbbAddressBlockIpv4	Concrete IPv4 specific PbbAddressBlock
Cns3::PbbAddressBlockIpv6	Concrete IPv6 specific PbbAddressBlock
►Cns3::SimpleRefCount< PbbMessage >
►Cns3::PbbMessage	A message within a PbbPacket packet
Cns3::PbbMessageIpv4	Concrete IPv4 specific PbbMessage
Cns3::PbbMessageIpv6	Concrete IPv6 specific PbbMessage class
►Cns3::SimpleRefCount< PbbTlv >
►Cns3::PbbTlv	A packet or message TLV
Cns3::PbbAddressTlv	An Address TLV
►Cns3::SimpleRefCount< RadvdInterface >
Cns3::RadvdInterface	Radvd interface configuration
►Cns3::SimpleRefCount< RadvdPrefix >
Cns3::RadvdPrefix	Router prefix for radvd application
►Cns3::SimpleRefCount< RefCountBase >
Cns3::RefCountBase	A deprecated way to get reference-counting powers
►Cns3::SimpleRefCount< SpectrumConverter >
Cns3::SpectrumConverter	Class which implements a converter between SpectrumValue which are defined over different SpectrumModel
►Cns3::SimpleRefCount< SpectrumModel >
Cns3::SpectrumModel	Set of frequency values implementing the domain of the functions in the Function Space defined by SpectrumValue
►Cns3::SimpleRefCount< SpectrumSignalParameters >
►Cns3::SpectrumSignalParameters	This struct provides the generic signal representation to be used by all wireless technologies
Cns3::HalfDuplexIdealPhySignalParameters	Signal parameters for HalfDuplexIdealPhy
Cns3::LrWpanSpectrumSignalParameters	Signal parameters for LrWpan
Cns3::LteSpectrumSignalParameters	Signal parameters for Lte
Cns3::LteSpectrumSignalParametersDataFrame	Signal parameters for Lte Data Frame (PDSCH), and eventually after some control messages through other control channel embedded in PDSCH (i.e
Cns3::LteSpectrumSignalParametersDlCtrlFrame	Signal parameters for Lte DL Ctrl Frame (RS, PCFICH and PDCCH)
Cns3::LteSpectrumSignalParametersUlSrsFrame	Signal parameters for Lte SRS Frame
►Cns3::SimpleRefCount< SpectrumValue >
Cns3::SpectrumValue	Set of values corresponding to a given SpectrumModel
►Cns3::SimpleRefCount< SystemThread >
Cns3::SystemThread	A class which provides a relatively platform-independent thread primitive
►Cns3::SimpleRefCount< TraceSourceAccessor >
Cns3::TraceSourceAccessor	Control access to objects' trace sources
►Cns3::SimpleRefCount< UeInfo >
Cns3::EpcMme::UeInfo	Hold info on a UE
Cns3::EpcSgwPgwApplication::UeInfo	Store info for each UE connected to this SGW
►Cns3::SimpleRefCount< UeMeasure >
Cns3::A2A4RsrqHandoverAlgorithm::UeMeasure	Measurements reported by a UE for a cell ID
Cns3::LteFfrDistributedAlgorithm::UeMeasure	Measurements reported by a UE for a cell ID
►Cns3::SimpleRefCount< VendorSpecificValue >
►Cns3::VendorSpecificValue	Base class for storing the values of vendor specific parameters
Cns3::SrsCqiRntiVsp	Define the RNTI that has generated the
►Cns3::SimpleRefCount< WifiInformationElement >
►Cns3::WifiInformationElement	Information element, as defined in 802.11-2007 standardThe IEEE 802.11 standard includes the notion of Information Elements, which are encodings of management information to be communicated between STAs in the payload of various frames of type Management
Cns3::dot11s::IeBeaconTiming	See 7.3.2.89 of 802.11s draft 2.07
Cns3::dot11s::IeConfiguration	Describes Mesh Configuration Element see 7.3.2.86 of 802.11s draft 3.0
Cns3::dot11s::IeLinkMetricReport	IEEE 802.11s Mesh ID 7.3.2.88 of 802.11s draft 3.0
Cns3::dot11s::IeMeshId	IEEE 802.11s Mesh ID 7.3.287 of 802.11s draft 3.0
Cns3::dot11s::IePeeringProtocol
Cns3::dot11s::IePeerManagement
Cns3::dot11s::IePerr	See 7.3.2.98 of 802.11s draft 2.07
Cns3::dot11s::IePrep	See 7.3.2.97 of 802.11s draft 2.07
Cns3::dot11s::IePreq	See 7.3.2.96 of 802.11s draft 2.07
Cns3::dot11s::IeRann	See 7.3.2.95 of 802.11s draft 2.07
Cns3::ExtendedSupportedRatesIE	The Extended Supported Rates Information ElementThis class knows how to serialise and deserialise the Extended Supported Rates Element that holds (non-HT) rates beyond the 8 that the original Supported Rates element can carry
Cns3::HtCapabilities	The HT Capabilities Information ElementThis class knows how to serialise and deserialise the HT Capabilities Information Element
Cns3::Ssid	The IEEE 802.11 SSID Information Element
Cns3::SupportedRates	The Supported Rates Information ElementThis class knows how to serialise and deserialise the Supported Rates Element that holds the first 8 (non-HT) supported rates
Cns3::VhtCapabilities	The IEEE 802.11ac VHT Capabilities
►Cns3::SimpleRefCount< X2CellInfo >
Cns3::X2CellInfo
►Cns3::SimpleRefCount< X2IfaceInfo >
Cns3::X2IfaceInfo
CEnbDlTestData
Cns3::EpcSgwPgwApplication::EnbInfo
CEnbTestData
CEnbUlTestData
►Cns3::EnergyHarvesterHelper	Creates EnergyHarvester objects
Cns3::BasicEnergyHarvesterHelper	Creates a BasicEnergyHarvester object
►Cns3::EnergySourceHelper	Creates EnergySource objects
Cns3::BasicEnergySourceHelper	Creates a BasicEnergySource object
Cns3::LiIonEnergySourceHelper	Creates a LiIonEnergySource object
Cns3::RvBatteryModelHelper	Creates a RvBatteryModel object
Cns3::ArpCache::Entry	A record that that holds information about an ArpCache entry
Cns3::Ipv4AddressGeneratorImpl::Entry	This class holds the allocated addresses
Cns3::Ipv6AddressGeneratorImpl::Entry	This class holds the allocated addresses
Cns3::NdiscCache::Entry	A record that holds information about an NdiscCache entry
►Cns3::EpcEnbS1SapProvider	This class implements the Service Access Point (SAP) between the LteEnbRrc and the EpcEnbApplication
Cns3::MemberEpcEnbS1SapProvider< C >	Template for the implementation of the EpcEnbS1SapProvider as a member of an owner class of type C to which all methods are forwarded
►Cns3::EpcEnbS1SapUser	This class implements the Service Access Point (SAP) between the LteEnbRrc and the EpcEnbApplication
Cns3::MemberEpcEnbS1SapUser< C >	Template for the implementation of the EpcEnbS1SapUser as a member of an owner class of type C to which all methods are forwarded
►Cns3::EpcS11Sap
►Cns3::EpcS11SapMme	MME side of the S11 Service Access Point (SAP), provides the MME methods to be called when an S11 message is received by the MME
Cns3::MemberEpcS11SapMme< C >	Template for the implementation of the EpcS11SapMme as a member of an owner class of type C to which all methods are forwarded
►Cns3::EpcS11SapSgw	SGW side of the S11 Service Access Point (SAP), provides the SGW methods to be called when an S11 message is received by the SGW
Cns3::MemberEpcS11SapSgw< C >	Template for the implementation of the EpcS11SapSgw as a member of an owner class of type C to which all methods are forwarded
►Cns3::EpcS1apSap
►Cns3::EpcS1apSapEnb	ENB side of the S1-AP Service Access Point (SAP), provides the eNB methods to be called when an S1-AP message is received by the eNB
Cns3::MemberEpcS1apSapEnb< C >	Template for the implementation of the EpcS1apSapEnb as a member of an owner class of type C to which all methods are forwarded
►Cns3::EpcS1apSapMme	MME side of the S1-AP Service Access Point (SAP), provides the MME methods to be called when an S1-AP message is received by the MME
Cns3::MemberEpcS1apSapMme< C >	Template for the implementation of the EpcS1apSapMme as a member of an owner class of type C to which all methods are forwarded
►Cns3::EpcX2Sap	The X2 SAP defines the service between the X2 entity and the RRC entity
►Cns3::EpcX2SapProvider	These service primitives of this part of the X2 SAP are provided by the X2 entity and issued by RRC entity
Cns3::EpcX2SpecificEpcX2SapProvider< C >
►Cns3::EpcX2SapUser	These service primitives of this part of the X2 SAP are provided by the RRC entity and issued by the X2 entity
Cns3::EpcX2SpecificEpcX2SapUser< C >
Cns3::EpsBearer	This class contains the specification of EPS Bearers
Cns3::EpcEnbApplication::EpsFlowId_t
Cns3::EpcX2Sap::ErabAdmittedItem	E-RABs admitted item as it is used in the HANDOVER REQUEST ACKNOWLEDGE message
Cns3::EpcX2Sap::ErabNotAdmittedItem	E-RABs not admitted item as it is used in the HANDOVER REQUEST ACKNOWLEDGE message
Cns3::EpcS1apSapMme::ErabSetupItem	E-RAB Setup Item IEs, see 3GPP TS 36.413 9.1.4.2
Cns3::EpcX2Sap::ErabsSubjectToStatusTransferItem
Cns3::EpcS1apSapMme::ErabSwitchedInDownlinkItem	E-RABs Switched in Downlink Item IE, see 3GPP TS 36.413 9.1.5.8
Cns3::EpcS1apSapEnb::ErabSwitchedInUplinkItem	E-RABs Switched in Uplink Item IE, see 3GPP TS 36.413 9.1.5.9
Cns3::EpcS1apSapMme::ErabToBeReleasedIndication	E-RAB Release Indication Item IEs, 3GPP TS 36.413 version 9.8.0 section 9.1.3.7
Cns3::EpcS1apSapEnb::ErabToBeSetupItem
Cns3::EpcX2Sap::ErabToBeSetupItem	E-RABs to be setup item as it is used in the HANDOVER REQUEST message
Cns3::ofi::EricssonAction	Class for handling Ericsson Vendor-defined actions
Cns3::dsr::ErrorBuffEntry	DSR Error Buffer Entry
Cns3::dsr::ErrorBuffer	DSR error buffer
Cns3::EutraChannelNumbers	Table 5.7.3-1 "E-UTRA channel numbers" from 3GPP TS 36.101 The table was converted to C syntax doing a cut & paste from TS 36.101 and running the following filter: awk '{if ((NR % 7) == 1) printf("{"); printf ("%s",$0); if ((NR % 7) == 0) printf("},\n"); else printf(", ");}' | sed 's/ – /, /g'
Cns3::EutranMeasurementMapping	Implements the E-UTRA measurement mappings defined in 3GPP TS 36.133 section 9.1 E-UTRAN measurements
Cns3::Scheduler::Event	Scheduler event
Cgrid.EventFloat
Cns3::EventGarbageCollector	An object that tracks scheduled events and automatically cancels them when it is destroyed
Cns3::EventId	An identifier for simulation events
Cns3::EventGarbageCollector::EventIdLessThanTs	Comparison operator for std::multiset
Cgrid.EventInt
Cns3::Scheduler::EventKey	Structure for sorting and comparing Events
Cns3::EventMemberImplObjTraits< T >	Helper for the MakeEvent functions which take a class method
Cns3::EventMemberImplObjTraits< Ptr< T > >	Helper for the MakeEvent functions which take a class method
Cns3::EventMemberImplObjTraits< T * >	Helper for the MakeEvent functions which take a class method
Cgrid.EventString
Cns3::DefaultSimulatorImpl::EventWithContext	Wrap an event with its execution context
Canonymous_namespace{packet-test-suite.cc}::Expected
CDcfStateTest::ExpectedCollision
CExperiment	Helper class for UAN CW MAC example
Cns3::PacketMetadata::ExtraItem	ExtraItem structure
Cns3::dot11s::HwmpProtocol::FailedDestination	Structure of unreachable destination - address and sequence number
CFakeNetDevice	Example class with a method for the background task
Cns3::anonymous_namespace{pyviz.cc}::FastClipping
Cns3::fdbetsFlowPerf_t
Cns3::fdtbfqsFlowPerf_t	Flow information
CFemtocellBlockAllocator
►Cns3::FfMacCschedSapProvider	Provides the CSCHED SAP
Cns3::CqaSchedulerMemberCschedSapProvider
Cns3::FdBetSchedulerMemberCschedSapProvider
Cns3::FdMtSchedulerMemberCschedSapProvider
Cns3::FdTbfqSchedulerMemberCschedSapProvider
Cns3::PfSchedulerMemberCschedSapProvider
Cns3::PssSchedulerMemberCschedSapProvider
Cns3::RrSchedulerMemberCschedSapProvider
Cns3::TdBetSchedulerMemberCschedSapProvider
Cns3::TdMtSchedulerMemberCschedSapProvider
Cns3::TdTbfqSchedulerMemberCschedSapProvider
Cns3::TtaSchedulerMemberCschedSapProvider
►Cns3::FfMacCschedSapUser
Cns3::EnbMacMemberFfMacCschedSapUser
►Cns3::FfMacSchedSapProvider	Provides the SCHED SAP
Cns3::CqaSchedulerMemberSchedSapProvider
Cns3::FdBetSchedulerMemberSchedSapProvider
Cns3::FdMtSchedulerMemberSchedSapProvider
Cns3::FdTbfqSchedulerMemberSchedSapProvider
Cns3::PfSchedulerMemberSchedSapProvider
Cns3::PssSchedulerMemberSchedSapProvider
Cns3::RrSchedulerMemberSchedSapProvider
Cns3::TdBetSchedulerMemberSchedSapProvider
Cns3::TdMtSchedulerMemberSchedSapProvider
Cns3::TdTbfqSchedulerMemberSchedSapProvider
Cns3::TtaSchedulerMemberSchedSapProvider
►Cns3::FfMacSchedSapUser
Cns3::EnbMacMemberFfMacSchedSapUser
Cns3::FfrEnhancedDownlinkDefaultConfiguration
Cns3::FfrEnhancedUplinkDefaultConfiguration
Cns3::FfrSoftDownlinkDefaultConfiguration
Cns3::FfrSoftUplinkDefaultConfiguration
►Cns3::FileConfig
Cns3::NoneFileConfig
Cns3::RawTextConfigLoad
Cns3::RawTextConfigSave
Cns3::XmlConfigLoad
Cns3::XmlConfigSave
Cns3::FileHelper	Helper class used to put data values into a file
Cns3::Ipv4FlowClassifier::FiveTuple	Structure to classify a packet
Cns3::Ipv6FlowClassifier::FiveTuple	Structure to classify a packet
Cns3::FlowMonitorHelper	Helper to enable IP flow monitoring on a set of Nodes
Cns3::FlowMonitor::FlowStats	Structure that represents the measured metrics of an individual packet flow
Cns3::FlowProbe::FlowStats	Structure to hold the statistics of a flow
Cns3::ofi::Stats::FlowStatsState	State of the FlowStats request/reply
Cns3::LteRrcSap::FreqInfo
Cns3::FrHardDownlinkDefaultConfiguration
Cns3::FrHardUplinkDefaultConfiguration
Cns3::FrSoftDownlinkDefaultConfiguration
Cns3::FrSoftUplinkDefaultConfiguration
Cns3::FrStrictDownlinkDefaultConfiguration
Cns3::FrStrictUplinkDefaultConfiguration
Cns3::EpcS11Sap::Fteid	Fully-qualified TEID, see 3GPP TS 29.274 section 8.22
CTypeTraits< T >::FunctionPtrTraits< U >	Not a function pointer type
CTypeTraits< T >::FunctionPtrTraits< U(*)(V1)>	Function pointer type
CTypeTraits< T >::FunctionPtrTraits< U(*)(V1, V2)>	Function pointer type
CTypeTraits< T >::FunctionPtrTraits< U(*)(V1, V2, V3)>	Function pointer type
CTypeTraits< T >::FunctionPtrTraits< U(*)(V1, V2, V3, V4)>	Function pointer type
CTypeTraits< T >::FunctionPtrTraits< U(*)(V1, V2, V3, V4, V5)>	Function pointer type
CTypeTraits< T >::FunctionPtrTraits< U(*)(V1, V2, V3, V4, V5, V6)>	Function pointer type
CTypeTraits< T >::FunctionPtrTraits< U(*)(void)>	Function pointer type
►Cg_defaultEntries
Cns3::UdpTraceClient	Default trace to send
Cns3::GbrQosInformation	3GPP TS 36.143 9.2.1.18 GBR QoS Information
Cns3::GeographicPositions	Consists of methods dealing with Earth geographic coordinates and locations
CGlobalPathlossDatabase	Store the last pathloss value for each TX-RX pair
Cns3::GlobalRouteManager	A global global router
Cns3::GlobalRouteManagerImpl	A global router implementation
Cns3::GlobalRouteManagerLSDB	The Link State DataBase (LSDB) of the Global Route Manager
Cns3::GlobalRoutingLinkRecord	A single link record for a link state advertisement
Cns3::GlobalRoutingLSA	Link State Advertisement (LSA) for a router, used in global routing
Cns3::GlobalValue	Hold a so-called 'global value'
Cns3::Gnuplot	Simple class to generate gnuplot-ready plotting commands from a set of datasets
Cns3::GnuplotCollection	Simple class to group together multiple gnuplots into one file, e.g
►Cns3::GnuplotDataset	Abstract class to store a plot line to be used by ns3::Gnuplot
Cns3::Gnuplot2dDataset	Class to represent a 2D points plot
Cns3::Gnuplot2dFunction	Class to represent a 2D function expression plot
Cns3::Gnuplot3dDataset	Class to represent a 3D points plot
Cns3::Gnuplot3dFunction	Class to represent a 3D function expression plot
Cns3::GnuplotHelper	Helper class used to make gnuplot plots
►CGObject
►Cvisualizer.base.PyVizObject
►Cvisualizer.base.Link
Cwifi_intrastructure_link.WifiLink
Cvisualizer.core.Visualizer
Cgrid.GraphicRenderer
Cns3::dsr::GraReplyEntry
Cns3::GtkConfigStore	A class that provides a GTK-based front end to ns3::ConfigStore
►CGtpcMessage
Cns3::EpcS11SapMme::DeleteBearerRequestMessage	Delete Bearer Request message, see 3GPP TS 29.274 Release 9 V9.3.0 section 7.2.9.2
Cns3::EpcS11SapMme::ModifyBearerResponseMessage	Modify Bearer Response message, see 3GPP TS 29.274 7.2.7
Cns3::EpcS11SapSgw::DeleteBearerCommandMessage	Delete Bearer Command message, see 3GPP TS 29.274 Release 9 V9.3.0 section 7.2.17.1
Cns3::EpcS11SapSgw::DeleteBearerResponseMessage	Delete Bearer Response message, see 3GPP TS 29.274 Release 9 V9.3.0 section 7.2.10.2
►Cns3::EpcS11Sap::GtpcMessage
Cns3::EpcS11SapMme::CreateSessionResponseMessage	Create Session Response message, see 3GPP TS 29.274 7.2.2
Cns3::EpcS11SapSgw::CreateSessionRequestMessage	Create Session Request message, see 3GPP TS 29.274 7.2.1
Cns3::EpcS11SapSgw::ModifyBearerRequestMessage	Modify Bearer Request message, see 3GPP TS 29.274 7.2.7
CHandoverEvent
Cns3::EpcX2Sap::HandoverPreparationFailureParams	Parameters of the HANDOVER PREPARATION FAILURE message
Cns3::LteRrcSap::HandoverPreparationInfo
Cns3::EpcX2Sap::HandoverRequestAckParams	Parameters of the HANDOVER REQUEST ACKNOWLEDGE message
Cns3::EpcX2Sap::HandoverRequestParams	Parameters of the HANDOVER REQUEST message
Cns3::HarqProcessInfoElement_t
Cns3::Hasher	Generic Hash function interface
Cns3::olsr::MessageHeader::Hello
Cns3::HigherLayerSelected_s	See section 4.3.27 higherLayerSelected
Cns3::Histogram	Class used to store data and make an histogram of the data frequency
Cns3::olsr::MessageHeader::Hna
Cns3::Ipv6RawSocketImpl::icmpv6Filter	Struct to hold the ICMPv6 filter
Cns3::aodv::IdCache	Unique packets identification cache used for simple duplicate detection
Cns3::IeMeshIdChecker	AttributeChecker implementation for IeMeshIdValue
Cns3::IeMeshIdValue	AttributeValue implementation for IeMeshId
Cns3::olsr::IfaceAssocTuple	An Interface Association Tuple
Cns3::IidManager::IidInformation	The information record about a single type id
►CIInterruptCallback	Struct interface to NSC soft interrupt capabilities
Cns3::NscInterfaceImpl	Nsc interface implementation class
Cns3::ImsiLcidPair_t
Cin6_ifreq	Struct holding IPv6 address data
Cns3::Indent	Helper to indent output a specified number of steps
Cns3::Inet6SocketAddress	An Inet6 address class
CINetDatagramSocket	Struct interface to NSC Datagram (i.e., UDP) Sockets
Cns3::InetSocketAddress	Inet address class
CINetStack	Struct interface to NSC stack
CINetStreamSocket	Struct interface to NSC Stream (i.e., TCP) Sockets
Cns3::Time::Information	How to convert between other units and the current unit
CInterferenceExperiment::Input
CPsrExperiment::Input
CCollisionExperiment::Input
Cns3::int64x64_t	High precision numerical type, implementing Q64.64 fixed precision
Cns3::int64x64::Int64x64TestSuite
Cns3::IntegerChecker	AttributeChecker implementation for IntegerValue
CInterferenceExperiment
Cns3::InterferenceHelper	Handles interference calculations
Cns3::IntToType< v >	Convert an integer into a type
CIpAddressHelper	Helper to print a node's IP addresses
Cns3::IpcsClassifierRecord
Cns3::IpcsClassifierRecord::ipv4Addr
Cns3::Ipv4AddressTlvValue::ipv4Addr
Cns3::Ipv4Address	Ipv4 addresses are stored in host order in this class
Cns3::Ipv4AddressGenerator	This generator assigns addresses sequentially from a provided network address; used in topology code
Cns3::Ipv4AddressGeneratorImpl	Implementation class of Ipv4AddressGenerator This generator assigns addresses sequentially from a provided network address; used in topology code
Cns3::Ipv4AddressHelper	A helper class to make life easier while doing simple IPv4 address assignment in scripts
Cns3::Ipv4EndPoint	A representation of an internet endpoint/connection
Cns3::Ipv4EndPointDemux	Demultiplexes packets to various transport layer endpoints
Cns3::Ipv4InterfaceAddress	Class to store IPv4 address information on an interface
Cns3::Ipv4InterfaceContainer	Holds a vector of std::pair of Ptr<Ipv4> and interface index
Cns3::Ipv4Mask	Class to represent an Ipv4 address mask
Cns3::Ipv4MulticastRoutingTableEntry	A record of an IPv4 multicast route for Ipv4GlobalRouting and Ipv4StaticRouting
Cns3::AnimationInterface::Ipv4RoutePathElement
Cns3::AnimationInterface::Ipv4RouteTrackElement
►Cns3::Ipv4RoutingHelper	Factory to create ns3::Ipv4RoutingProtocol objects
Cns3::AodvHelper	Helper class that adds AODV routing to nodes
Cns3::DsdvHelper	Helper class that adds DSDV routing to nodes
Cns3::Ipv4GlobalRoutingHelper	Helper class that adds ns3::Ipv4GlobalRouting objects
Cns3::Ipv4ListRoutingHelper	Helper class that adds ns3::Ipv4ListRouting objects
Cns3::Ipv4NixVectorHelper	Helper class that adds Nix-vector routing to nodes
Cns3::Ipv4StaticRoutingHelper	Helper class that adds ns3::Ipv4StaticRouting objects
Cns3::OlsrHelper	Helper class that adds OLSR routing to nodes
Cns3::Ipv4RoutingTableEntry	A record of an IPv4 routing table entry for Ipv4GlobalRouting and Ipv4StaticRouting
Cns3::Ipv6Address	Describes an IPv6 address
Cns3::Ipv6AddressGenerator	This generator assigns addresses sequentially from a provided network address; used in topology code
Cns3::Ipv6AddressGeneratorImpl	Implementation class of Ipv6AddressGenerator This generator assigns addresses sequentially from a provided network address; used in topology code
Cns3::Ipv6AddressHelper	Helper class to auto-assign global IPv6 unicast addresses
Cns3::Ipv6EndPoint	A representation of an internet IPv6 endpoint/connection
Cns3::Ipv6EndPointDemux	Demultiplexor for end points
Cns3::Ipv6InterfaceAddress	IPv6 address associated with an interface
Cns3::Ipv6InterfaceContainer	Keep track of a set of IPv6 interfaces
Cns3::Ipv6MulticastRoutingTableEntry	A record of an IPv6 multicast route
Cns3::Ipv6Prefix	Describes an IPv6 prefix
►Cns3::Ipv6RoutingHelper	A factory to create ns3::Ipv6RoutingProtocol objects
Cns3::Ipv6ListRoutingHelper	Helper class that adds ns3::Ipv6ListRouting objects
Cns3::Ipv6StaticRoutingHelper	Helper class that adds ns3::Ipv6StaticRouting objects
Cns3::RipNgHelper	Helper class that adds RIPng routing to nodes
►Cns3::Ipv6RoutingTableEntry	A record of an IPv6 route
Cns3::RipNgRoutingTableEntry	RipNg Routing Table Entry
►CISendCallback	Struct interface to NSC send capabilities
Cns3::NscInterfaceImpl	Nsc interface implementation class
Cns3::dsdv::IsExpired
Cns3::dsr::IsExpired
Cns3::dsr::GraReply::IsExpired	Check if the entry is expired or not
Cns3::dsr::RreqTable::IsExpired	Check if the entry is expired or not
Cns3::aodv::IdCache::IsExpired
Cns3::aodv::IsExpired
Cns3::PacketMetadata::Item	Structure describing a packet metadata item
Cns3::ByteTagIterator::Item	Identifies a byte tag and a set of bytes within a packet to which the tag applies
Cns3::PacketTagIterator::Item	Identifies a packet tag within a packet
Cns3::AttributeConstructionList::Item	A single Attribute triple
Cns3::BlockAckManager::Item	A struct for packet, Wifi header, and timestamp
Cns3::MacLow::Item	A struct for packet, Wifi header, and timestamp
Cns3::WifiMacQueue::Item	A struct that holds information about a packet for putting in a packet queue
►Cns3::CommandLine::Item	The argument base class
Cns3::CommandLine::CallbackItem	An argument Item using a Callback to parse the input
Cns3::CommandLine::UserItem< T >	An argument Item assigning to POD
Cns3::ByteTagList::Iterator::Item	An item specifies an individual tag within a byte buffer
Cns3::PacketMetadata::ItemIterator	Iterator class for metadata items
►CItemSimple
Cvisualizer.svgitem.SvgItem
►Cvisualizer.ipython_view.IterableIPShell
Cvisualizer.ipython_view.IPythonView
Cns3::Buffer::Iterator	Iterator in a Buffer instance
Cns3::ByteTagList::Iterator	An iterator for iterating through a byte tag list
CJakesPropagationExample	Constructs a JakesPropagationlossModel and print the loss value as a function of time into std::cout
Cns3::PyViz::LastPacketsSample
Cns3::LbtsMessage	Structure used for all-reduce LBTS computation
Cns3::LteEnbCmacSapProvider::LcInfo	Logical Channel information to be passed to CmacSapProvider::ConfigureLc
Cns3::LteUeMac::LcInfo
Cns3::BridgeNetDevice::LearnedState	Structure holding the status of an address
Cns3::ofi::LearningController::LearnedState
Cns3::anonymous_namespace{pyviz.cc}::FastClipping::Line
Cns3::PointToPointChannel::Link	Wire model for the PointToPointChannel
Cns3::TopologyReader::Link	Inner class holding the details about a link between two nodes
Cns3::dsr::Link	The route cache structure
Cns3::dsr::LinkKey	The maintenance buffer is responsible for maintaining packet next hop delivery The data packet is saved in maintenance buffer whenever the data packet is sent out of send buffer
Cns3::olsr::MessageHeader::Hello::LinkMessage
Cns3::AnimationInterface::LinkPairCompare
Cns3::AnimationInterface::LinkProperties
Cns3::dsr::LinkStab
Cns3::olsr::LinkTuple	A Link Tuple
Cns3::EpcX2Sap::LoadInformationParams	Parameters of the LOAD INFORMATION message
CLoadProfile
Cns3::Buffer::LocalStaticDestructor	Local static destructor structure
Cns3::LogComponent	A single log component configuration
Cns3::LteRrcSap::LogicalChannelConfig
Cns3::LteUeCmacSapProvider::LogicalChannelConfig
Cns3::LogicalChannelConfigListElement_s	See section 4.3.4 logicalChannelConfigListElement
Cns3::dot11s::HwmpRtable::LookupResult	Route lookup result, return type of LookupXXX methods
Cns3::flame::FlameRtable::LookupResult	Route lookup result, return type of LookupXXX methods
Cns3::LrWpanEdPower	Helper structure to manage the power measurement during ED
Cns3::LrWpanPhyDataAndSymbolRates	This data structure provides the Bit rate and Symbol rate for a given channel See IEEE802.15.4-2006 Table 1 and 2 in section 6.1.1 and 6.1.2
Cns3::LrWpanPhyPibAttributes	IEEE802.15.4-2006 PHY PIB Attributes Table 23 in section 6.4.2
Cns3::LrWpanPhyPpduHeaderSymbolNumber	This data structure provides number of symbols for the PPDU headers: SHR and PHR See IEEE802.15.4-2006 Figure 16, Table 19 and 20 in section 6.3
Cns3::LrWpanSpectrumModelInitializer	Helper class used to automatically initialize the LrWpan Spectrum Model objects
Cns3::LrWpanSpectrumValueHelper	This class defines all functions to create spectrum model for LrWpan
►Cns3::LteAnrSapProvider	Service Access Point (SAP) offered by the ANR instance to the eNodeB RRC instance
Cns3::MemberLteAnrSapProvider< C >	Template for the implementation of the LteAnrSapProvider as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteAnrSapUser	Service Access Point (SAP) offered by the eNodeB RRC instance to the ANR instance
Cns3::MemberLteAnrSapUser< C >	Template for the implementation of the LteAnrSapUser as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteAsSapProvider	This class implements the Access Stratum (AS) Service Access Point (SAP), i.e., the interface between the EpcUeNas and the LteUeRrc
Cns3::MemberLteAsSapProvider< C >	Template for the implementation of the LteAsSapProvider as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteAsSapUser	This class implements the Access Stratum (AS) Service Access Point (SAP), i.e., the interface between the EpcUeNas and the LteUeRrc In particular, this class implements the User part of the SAP, i.e., the methods exported by the EpcUeNas and called by the LteUeRrc
Cns3::MemberLteAsSapUser< C >	Template for the implementation of the LteAsSapUser as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteEnbCmacSapProvider	Service Access Point (SAP) offered by the eNB MAC to the eNB RRC See Femto Forum MAC Scheduler Interface Specification v 1.11, Figure 1
Cns3::EnbMacMemberLteEnbCmacSapProvider
►Cns3::LteEnbCmacSapUser	Service Access Point (SAP) offered by the MAC to the RRC See Femto Forum MAC Scheduler Interface Specification v 1.11, Figure 1
Cns3::EnbRrcMemberLteEnbCmacSapUser	Class for forwarding CMAC SAP User functions
►Cns3::LteEnbCphySapProvider	Service Access Point (SAP) offered by the UE PHY to the UE RRC for control purposes
Cns3::MemberLteEnbCphySapProvider< C >	Template for the implementation of the LteEnbCphySapProvider as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteEnbCphySapUser	Service Access Point (SAP) offered by the UE PHY to the UE RRC for control purposes
Cns3::MemberLteEnbCphySapUser< C >	Template for the implementation of the LteEnbCphySapUser as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteEnbPhySapProvider	Service Access Point (SAP) offered by the eNB-PHY to the eNB-MAC
Cns3::EnbMemberLteEnbPhySapProvider
►Cns3::LteEnbPhySapUser	Service Access Point (SAP) offered by the eNB-PHY to the eNB-MAC
Cns3::EnbMacMemberLteEnbPhySapUser
Cns3::LteFfConverter
►Cns3::LteFfrRrcSapProvider	Service Access Point (SAP) offered by the Frequency Reuse algorithm instance to the eNodeB RRC instance
Cns3::MemberLteFfrRrcSapProvider< C >	Template for the implementation of the LteFfrRrcSapProvider as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteFfrRrcSapUser	Service Access Point (SAP) offered by the eNodeB RRC instance to the Frequency Reuse algorithm instance
Cns3::MemberLteFfrRrcSapUser< C >	Template for the implementation of the LteFfrRrcSapUser as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteFfrSapProvider	Service Access Point (SAP) offered by the Frequency Reuse algorithm instance to the MAC Scheduler instance
Cns3::MemberLteFfrSapProvider< C >	Template for the implementation of the LteFfrSapProvider as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteFfrSapUser	Service Access Point (SAP) offered by the eNodeB RRC instance to the Frequency Reuse algorithm instance
Cns3::MemberLteFfrSapUser< C >	Template for the implementation of the LteFfrSapUser as a member of an owner class of type C to which all methods are forwarded
Cns3::LteFlowId_t
►Cns3::LteGlobalPathlossDatabase	Store the last pathloss value for each TX-RX pair
Cns3::DownlinkLteGlobalPathlossDatabase	Store the last pathloss value for each TX-RX pair for downlink
Cns3::UplinkLteGlobalPathlossDatabase	Store the last pathloss value for each TX-RX pair for uplink
►Cns3::LteHandoverManagementSapProvider	Service Access Point (SAP) offered by the handover algorithm instance to the eNodeB RRC instance
Cns3::MemberLteHandoverManagementSapProvider< C >	Template for the implementation of the LteHandoverManagementSapProvider as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteHandoverManagementSapUser	Service Access Point (SAP) offered by the eNodeB RRC instance to the handover algorithm instance
Cns3::MemberLteHandoverManagementSapUser< C >	Template for the implementation of the LteHandoverManagementSapUser as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteMacSapProvider	Service Access Point (SAP) offered by the MAC to the RLC See Femto Forum MAC Scheduler Interface Specification v 1.11, Figure 1
Cns3::EnbMacMemberLteMacSapProvider< C >
Cns3::UeMemberLteMacSapProvider
►Cns3::LteMacSapUser	Service Access Point (SAP) offered by the MAC to the RLC See Femto Forum MAC Scheduler Interface Specification v 1.11, Figure 1
Cns3::LteRlcSpecificLteMacSapUser
Cns3::LteMiErrorModel	This class provides the BLER estimation based on mutual information metrics
►Cns3::LtePdcpSapProvider	Service Access Point (SAP) offered by the PDCP entity to the RRC entity See 3GPP 36.323 Packet Data Convergence Protocol (PDCP) specification
Cns3::LtePdcpSpecificLtePdcpSapProvider< C >
►Cns3::LtePdcpSapUser	Service Access Point (SAP) offered by the PDCP entity to the RRC entity See 3GPP 36.323 Packet Data Convergence Protocol (PDCP) specification
Cns3::LtePdcpSpecificLtePdcpSapUser< C >
►Cns3::LteRlcSapProvider	Service Access Point (SAP) offered by the UM-RLC and AM-RLC entities to the PDCP entity See 3GPP 36.322 Radio Link Control (RLC) protocol specification
Cns3::LteRlcSpecificLteRlcSapProvider< C >
►Cns3::LteRlcSapUser	Service Access Point (SAP) offered by the UM-RLC and AM-RLC entities to the PDCP entity See 3GPP 36.322 Radio Link Control (RLC) protocol specification
Cns3::LtePdcpSpecificLteRlcSapUser
Cns3::LteRlcSpecificLteRlcSapUser< C >
Cns3::RealProtocolRlcSapUser
►Cns3::LteRrcSap	Class holding definition common to all UE/eNodeB SAP Users/Providers
►Cns3::LteEnbRrcSapProvider	Part of the RRC protocol
Cns3::MemberLteEnbRrcSapProvider< C >	Template for the implementation of the LteEnbRrcSapProvider as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteEnbRrcSapUser	Part of the RRC protocol
Cns3::MemberLteEnbRrcSapUser< C >	Template for the implementation of the LteEnbRrcSapUser as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteUeRrcSapProvider	Part of the RRC protocol
Cns3::MemberLteUeRrcSapProvider< C >	Template for the implementation of the LteUeRrcSapProvider as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteUeRrcSapUser	Part of the RRC protocol
Cns3::MemberLteUeRrcSapUser< C >	Template for the implementation of the LteUeRrcSapUser as a member of an owner class of type C to which all methods are forwarded
Cns3::LteSpectrumModelId
Cns3::LteSpectrumValueCatcher	A sink to be plugged to the callback of LteChunkProcessor allowing to save and later retrieve the latest reported value
Cns3::LteSpectrumValueHelper	This class defines all functions to create spectrum model for lte
►Cns3::LteUeCmacSapProvider	Service Access Point (SAP) offered by the UE MAC to the UE RRC
Cns3::UeMemberLteUeCmacSapProvider
►Cns3::LteUeCmacSapUser	Service Access Point (SAP) offered by the UE MAC to the UE RRC
Cns3::UeMemberLteUeCmacSapUser
Cns3::LteUeConfig_t	Parameters for configuring the UE
►Cns3::LteUeCphySapProvider	Service Access Point (SAP) offered by the UE PHY to the UE RRC for control purposes
Cns3::MemberLteUeCphySapProvider< C >	Template for the implementation of the LteUeCphySapProvider as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteUeCphySapUser	Service Access Point (SAP) offered by the UE PHY to the UE RRC for control purposes
Cns3::MemberLteUeCphySapUser< C >	Template for the implementation of the LteUeCphySapUser as a member of an owner class of type C to which all methods are forwarded
►Cns3::LteUePhySapProvider	Service Access Point (SAP) offered by the UE-PHY to the UE-MAC
Cns3::UeMemberLteUePhySapProvider
►Cns3::LteUePhySapUser	Service Access Point (SAP) offered by the PHY to the MAC
Cns3::UeMemberLteUePhySapUser
Cns3::Mac16Address	This class can contain 16 bit addresses
Cns3::Mac48Address	EUI-48 address
Cns3::Mac64Address	EUI-64 address
Cns3::MacCeListElement_s	See section 4.3.14 macCEListElement
Cns3::MacCeValue_u	See section 4.3.15 macCEValue
►Cns3::MacLowAggregationCapableTransmissionListener	Listen for block ack events
Cns3::EdcaTxopN::AggregationCapableTransmissionListener
►Cns3::MacLowDcfListener	Listen to NAV eventsThis class is typically connected to an instance of ns3::Dcf and calls to its methods are forwards to the corresponding ns3::Dcf methods
Cns3::LowDcfListener	Listener for NAV events
►Cns3::MacLowTransmissionListener	Listen to events coming from ns3::MacLow
Cns3::DcaTxop::TransmissionListener	Listener for MacLow events
Cns3::EdcaTxopN::TransmissionListener
Cns3::MacLowTransmissionParameters	Control how a packet is transmitted
Cns3::MacRxMiddle	This class handles duplicate detection and recomposition of fragments
Cns3::MacTxMiddle	Handles sequence numbering of IEEE 802.11 data frames
Cns3::dsr::MaintainBuffEntry	DSR Maintain Buffer Entry
Cns3::dsr::MaintainBuffer	DSR maintain buffer
Cgrid.MainWindow
Cns3::LteRrcSap::MasterInformationBlock
Cns3::Config::MatchContainer	Hold a set of objects which match a specific search string
Cns3::McpsDataConfirmParams	MCPS-DATA.confirm params
Cns3::McpsDataIndicationParams	MCPS-DATA.indication params
Cns3::McpsDataRequestParams	MCPS-DATA.request params
Cns3::LteRrcSap::MeasConfig
Cns3::LteRrcSap::MeasGapConfig
Cns3::LteRrcSap::MeasIdToAddMod
Cns3::LteRrcSap::MeasObjectEutra
Cns3::LteRrcSap::MeasObjectToAddMod
Cns3::LteRrcSap::MeasResultEutra
Cns3::LteRrcSap::MeasResults
Cns3::LteRrcSap::MeasurementReport
Cns3::LteUeRrc::MeasValues	Represents a measurement result from a certain cell
Cns3::MeshHelper	Helper to create IEEE 802.11s mesh networks
CMeshTest
Cns3::MeshWifiBeacon	Beacon is beacon header + list of arbitrary information elements
Cns3::MicrowaveOvenSpectrumModel5MhzInitializer
Cns3::MicrowaveOvenSpectrumModel6MhzInitializer
Cns3::MicrowaveOvenSpectrumValueHelper	This class provides methods for the creation of SpectrumValue instances that mimic the Power Spectral Density of commercial microwave ovens based on the measurements reported in the following paper: Tanim M
Cns3::olsr::MessageHeader::Mid
Cns3::LteRrcSap::MobilityControlInfo
Cns3::MobilityHelper	Helper class used to assign positions and mobility models to nodes
Cns3::LteRrcSap::MobilityStateParameters
Cns3::ModelNode
Cns3::ModelTypeid
Cns3::mpduInfo
Cns3::MpiInterface	Singleton used to interface to the communications infrastructure when running NS3 in parallel
Cns3::olsr::MprSelectorTuple	An MPR-Selector Tuple
CMyCb	Example Callback class
CMyModel	Simple model object to illustrate event handling
Cns3::dot11s::HwmpProtocolMac::MyPerr
Cns3::NameNode	Node in the naming tree
Cns3::Names	A directory of name and Ptr<Object> associations that allows us to give any ns3 Object a name
Cns3::LteEnbMac::NcRaPreambleInfo	Info associated with a preamble allocated for non-contention based RA
Cns3::dsr::RouteCache::Neighbor	The following code handles link-layer acks
Cns3::aodv::Neighbors::Neighbor	Neighbor description
Cns3::aodv::Neighbors	Maintain list of active neighbors
Cns3::olsr::NeighborTuple	A Neighbor Tuple
Cns3::LteAnr::NeighbourRelation_t	Neighbour Relation between two eNodeBs (serving eNodeB and neighbour eNodeB)
CNetAnimExperiment	Helper class for UAN CW MAC example
Cns3::NetDeviceContainer	Holds a vector of ns3::NetDevice pointers
Cns3::PyViz::NetDeviceStatistics
Cns3::dsr::NetworkKey
Cns3::Ipv4AddressGeneratorImpl::NetworkState	This class holds the state for a given network
Cns3::Ipv6AddressGeneratorImpl::NetworkState	This class holds the state for a given network
Cns3::InterferenceHelper::NiChange	Noise and Interference (thus Ni) event
Cns3::NodeContainer	Keep track of a set of node pointers
Cns3::NodeList	List of simulation nodes
Cns3::AnimationInterface::NodeSize
Cns3::dsr::NodeStab
CNodeStatistics
Cns3::PyViz::NodeStatistics
Canonymous_namespace{traced-callback-typedef-test-suite.cc}::NonConstReferenced< T >	Non-const non-reference type
►Cns3::NonCopyable	A base class for (non-Singleton) objects which shouldn't be copied
Cns3::Singleton< T >	A template singleton
►Cns3::TestCase	Encapsulates test code
►CAbstractAnimationInterfaceTestCase
CAnimationInterfaceTestCase
CAnimationRemainingEnergyTestCase
CAcousticModemEnergyDepletionTestCase
CAcousticModemEnergyTestCase
CAddressAllocator6TestCase
CAddressAllocatorHelperTestCase
CAddressAllocatorTestCase
CAddressCollision6TestCase
CAddressCollisionTestCase
CAggregateObjectTestCase
CAlternateFindTestCase
CAnnexC_TestCase
CAttributeTestCase< T >
CBasicAddTestCase
CBasicCallbackTestCase
CBasicEnergyHarvesterTestCase
CBasicFindTestCase
CBasicRenameTestCase
CBasicTracedCallbackTestCase
CBriteTopologyFunctionTestCase
CBriteTopologyStructureTestCase
CBufferTest
CBug555TestCase	Make sure that when multiple broadcast packets are queued on the same device in a short succession no virtual collision occurs
CBug730TestCase	Make sure that when changing the fragmentation threshold during the simulation, the TCP transmission does not unexpectedly stop
CBug772ChainTest	AODV deferred route lookup test case (see Bug 772)
CBuildingsHelperOneTestCase
CBuildingsPathlossTestCase
CBuildingsShadowingTestCase
CBuildProfileTestCase
CBurstErrorModelSimple
CCallbackValueTestCase
CChainRegressionTest	AODV chain regression test
CChannelAccessTestCase
CChannelCoordinationTestCase
CChannelRoutingTestCase	Route packets or frames in different approaches see 1609.4-2010 chapter 5.3.4
CCoDelQueueBasicDrop
CCoDelQueueBasicEnqueueDequeue
CCoDelQueueBasicOverflow
CCoDelQueueControlLawTest
CCoDelQueueNewtonStepTest
CCollisionTestCase
►CCommandLineTestCaseBase	A test base class that drives Command Line parsing
CCommandLineBooleanTestCase	Test boolean Command Line processing
CCommandLineIntTestCase	Test int Command Line processing
CCommandLineStringTestCase	Test string Command Line processing
CCommandLineUnsignedIntTestCase	Test unsigned int Command Line processing
CCosineAntennaModelTestCase
CCreateObjectTestCase
CCsmaBridgeTestCase
CCsmaBroadcastTestCase
CCsmaMulticastTestCase
CCsmaOneSubnetTestCase
CCsmaPacketSocketTestCase
CCsmaPingTestCase
CCsmaRawIpSocketTestCase
CCsmaStarTestCase
CCtrlBAckResponseHeaderTest
CDcfManagerTest
CDegreesToRadiansTestCase
CDiffTestCase
CDropTailQueueTestCase
CDsaRequestTestCase
CDsdvHeaderTestCase
CDsdvTableTestCase
CDsrAckHeaderTest
CDsrAckReqHeaderTest
CDsrCacheEntryTest
CDsrFsHeaderTest
CDsrRerrHeaderTest
CDsrRrepHeaderTest
CDsrRreqHeaderTest
CDsrRreqTableTest
CDsrSendBuffTest
CDsrSRHeaderTest
CDualStackTestCase
CEpcS1uDlTestCase
CEpcS1uUlTestCase
CEpcTftClassifierTestCase
CEpsGtpuHeaderTestCase	Test 1.Check header coding and decoding
CErrorModelSimple
CEventGarbageCollectorTestCase
CExampleAddress6GeneratorTestCase
CExampleAddressGeneratorTestCase
CFileHeaderTestCase
CFindPathTestCase
CFiveDoublesAverageTestCase
CFiveDoublesTestCase
CFiveIntegersAverageTestCase
CFiveIntegersTestCase
CFlameHeaderTest	Built-in self test for FlameHeader
CFlameRegressionTest	FLAME protocol regression test of three stations:
CFlameRtableTest	Unit test for FlameRtable
CFriisPropagationLossModelTestCase
CFullyQualifiedAddTestCase
CFullyQualifiedFindTestCase
CFullyQualifiedRenameTestCase
CGeoToCartesianTestCase
CGlobalRouteManagerImplTestCase
CGlobalValueTestCase
►CHashTestCase	Base class for hash tests
CDefaultHashTestCase
CFnv1aTestCase
CHash32FunctionPtrTestCase	Test 32-bit function pointer
CHash64FunctionPtrTestCase	Test 64-bit function pointer
CIncrementalTestCase	Test incremental hashing
CMurmur3TestCase
CHistogramTestCase
CHwmpDoRfRegressionTest	This is a test for intermediate reply and saving routing information about neighbour
CHwmpProactiveRegressionTest	There are 5 stations set into a column, the center station is root
CHwmpReactiveRegressionTest	Test for multihop path establishing and path error procedures Initiate scenario with 6 stations
CHwmpRtableTest	Unit test for HwmpRtable
CHwmpSimplestRegressionTest	Peering Management & HWM Protocol regression test Initiate scenario with 2 stations
CIntegerTraceSourceAttributeTestCase
CIntegerTraceSourceTestCase
CInterferenceHelperSequenceTest	See Bug 991
CIpAddressHelperTestCasev4
CIpAddressHelperTestCasev6
CIpv4DynamicGlobalRoutingTestCase
CIpv4ForwardingTest
CIpv4FragmentationTest
CIpv4GlobalRoutingSlash32TestCase
CIpv4HeaderTest
CIpv4L3ProtocolTestCase
CIpv4ListRoutingNegativeTestCase
CIpv4ListRoutingPositiveTestCase
CIpv4PacketInfoTagTest
CIpv4RawSocketImplTest
CIpv4StaticRoutingSlash32TestCase
CIpv6AddressTestCase1
CIpv6ForwardingTest
CIpv6FragmentationTest
CIpv6L3ProtocolTestCase
CIpv6ListRoutingNegativeTestCase
CIpv6ListRoutingPositiveTestCase
CIpv6PacketInfoTagTest
CIpv6RawSocketImplTest
CIpv6RipngCountToInfinityTest
CIpv6RipngSplitHorizonStrategyTest
CIpv6RipngTest
CIsotropicAntennaModelTestCase
CItuR1411LosPropagationLossModelTestCase
CItuR1411NlosOverRooftopPropagationLossModelTestCase
CKun2600MhzPropagationLossModelTestCase
CLenaCqaFfMacSchedulerTestCase1	This is a system test program
CLenaCqaFfMacSchedulerTestCase2
CLenaDataPhyErrorModelTestCase	This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification
CLenaDlCtrlPhyErrorModelTestCase
CLenaFdBetFfMacSchedulerTestCase1	This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification
CLenaFdBetFfMacSchedulerTestCase2
CLenaFdMtFfMacSchedulerTestCase	This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification
CLenaFdTbfqFfMacSchedulerTestCase1	This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification
CLenaFdTbfqFfMacSchedulerTestCase2
CLenaHarqTestCase	This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification
CLenaMimoTestCase	This system test program creates different test cases with a single eNB..
CLenaPfFfMacSchedulerTestCase1	This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification
CLenaPfFfMacSchedulerTestCase2
CLenaPssFfMacSchedulerTestCase1	This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification
CLenaPssFfMacSchedulerTestCase2
CLenaRrFfMacSchedulerTestCase	This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification
CLenaTdBetFfMacSchedulerTestCase1	This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification
CLenaTdBetFfMacSchedulerTestCase2
CLenaTdMtFfMacSchedulerTestCase	This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification
CLenaTdTbfqFfMacSchedulerTestCase1	This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification
CLenaTdTbfqFfMacSchedulerTestCase2
CLenaTtaFfMacSchedulerTestCase	This system test program creates different test cases with a single eNB and several UEs, all having the same Radio Bearer specification
CLiIonEnergyTestCase
CLogDistancePropagationLossModelTestCase
CLookupTimeTestCase
CLrWpanAckTestCase
CLrWpanCcaTestCase
CLrWpanCollisionTestCase
CLrWpanEdTestCase
CLrWpanErrorDistanceTestCase
CLrWpanErrorModelTestCase
CLrWpanPacketTestCase
CLrWpanPlmeAndPdInterfaceTestCase
CLrWpanSpectrumValueHelperTestCase
CLteCellSelectionTestCase	Testing the initial cell selection procedure by UE at IDLE state in the beginning of simulation
CLteCqiGenerationDlPowerControlTestCase
CLteCqiGenerationTestCase
CLteDownlinkCtrlSinrTestCase
CLteDownlinkDataSinrTestCase
CLteDownlinkPowerControlRrcConnectionReconfigurationTestCase
CLteDownlinkPowerControlSpectrumValueTestCase
CLteDownlinkPowerControlTestCase
►CLteEarfcnTestCase
CLteEarfcnDlTestCase
CLteEarfcnUlTestCase
CLteEnbAntennaTestCase
CLteEpcE2eDataTestCase
CLteFadingSystemTestCase
CLteFadingTestCase
►CLteFrAreaTestCase
CLteDistributedFfrAreaTestCase
CLteEnhancedFfrAreaTestCase
CLteSoftFfrAreaTestCase
CLteSoftFrAreaTestCase
CLteStrictFrAreaTestCase
►CLteFrTestCase
CLteHardFrTestCase
CLteStrictFrTestCase
CLteHandoverDelayTestCase
CLteHandoverTargetTestCase	Testing a handover algorithm, verifying that it selects the right target cell when more than one options available
CLteInterferenceHardFrTestCase
CLteInterferenceStrictFrTestCase
CLteInterferenceTestCase
CLteLinkAdaptationTestCase
CLteNoisePsdTestCase
CLtePathlossModelSystemTestCase
CLteRlcAmE2eTestCase	Test cases used for the test suite lte-rlc-am-e2e
►CLteRlcAmTransmitterTestCase
CLteRlcAmTransmitterConcatenationTestCase	Test 4.1.1.3 Concatenation (n SDUs => One PDU)
CLteRlcAmTransmitterOneSduTestCase	Test 4.1.1.1 One SDU, One PDU
CLteRlcAmTransmitterReportBufferStatusTestCase	Test 4.1.1.4 Report Buffer Status (test primitive parameters)
CLteRlcAmTransmitterSegmentationTestCase	Test 4.1.1.2 Segmentation (One SDU => n PDUs)
CLteRlcUmE2eTestCase
►CLteRlcUmTransmitterTestCase
CLteRlcUmTransmitterConcatenationTestCase	Test 4.1.1.3 Concatenation (n SDUs => One PDU)
CLteRlcUmTransmitterOneSduTestCase	Test 4.1.1.1 One SDU, One PDU
CLteRlcUmTransmitterReportBufferStatusTestCase	Test 4.1.1.4 Report Buffer Status (test primitive parameters)
CLteRlcUmTransmitterSegmentationTestCase	Test 4.1.1.2 Segmentation (One SDU => n PDUs)
►CLteRrcConnectionEstablishmentTestCase
CLteRrcConnectionEstablishmentErrorTestCase
CLteSpectrumModelTestCase
CLteTxPsdTestCase
CLteUeMeasurementsHandoverTestCase	Testing UE measurements in LTE with simulation of 2 eNodeB and 1 UE in a handover configuration
CLteUeMeasurementsPiecewiseTestCase1	Testing UE measurements in LTE with simulation of 1 eNodeB and 1 UE in piecewise configuration and 120 ms report interval
CLteUeMeasurementsPiecewiseTestCase2	Testing UE measurements in LTE with simulation of 2 eNodeB and 1 UE in piecewise configuration and 240 ms report interval
CLteUeMeasurementsTestCase
CLteUplinkDataSinrTestCase
►CLteUplinkPowerControlTestCase
CLteUplinkClosedLoopPowerControlAbsoluteModeTestCase
CLteUplinkClosedLoopPowerControlAccumulatedModeTestCase
CLteUplinkOpenLoopPowerControlTestCase
CLteUplinkSrsSinrTestCase
CLteX2HandoverMeasuresTestCase
CLteX2HandoverTestCase
CMakeBoundCallbackTestCase
CMakeCallbackTemplatesTestCase
CMakeCallbackTestCase
CManyUniformRandomVariablesOneGetValueCallTestCase
CMatrixPropagationLossModelTestCase
CMeshHeaderTest	Built-in self test for FlameHeader
CMeshInformationElementVectorBist	Built-in self test for MeshInformationElementVector and all IE
CMobilityTraceTestCase
CNetworkAllocatorHelperTestCase
CNetworkAndAddress6TestCase
CNetworkAndAddressTestCase
CNetworkNumber6AllocatorTestCase
CNetworkNumberAllocatorTestCase
CNs2MobilityHelperTest	Every test case is supposed to:
Cns3::aodv::AodvRqueueTest	Unit test for RequestQueue
Cns3::aodv::AodvRtableEntryTest	Unit test for AODV routing table entry
Cns3::aodv::AodvRtableTest	Unit test for AODV routing table
Cns3::aodv::IdCacheTest	Unit test for id cache
Cns3::aodv::LoopbackTestCase	AODV loopback UDP echo test case
Cns3::aodv::NeighborTest	Unit test for neighbors
Cns3::aodv::QueueEntryTest	Unit test for AODV routing table entry
Cns3::aodv::RerrHeaderTest	Unit test for RERR
Cns3::aodv::RrepAckHeaderTest	Unit test for RREP-ACK
Cns3::aodv::RrepHeaderTest	Unit test for RREP
Cns3::aodv::RreqHeaderTest	Unit test for RREQ
Cns3::aodv::TypeHeaderTest
Cns3::int64x64::test::Int64x64ArithmeticTestCase
Cns3::int64x64::test::Int64x64Bug1786TestCase	See Bug 1786
Cns3::int64x64::test::Int64x64Bug455TestCase	See Bug 455
Cns3::int64x64::test::Int64x64Bug863TestCase	See Bug 863
Cns3::int64x64::test::Int64x64CompareTestCase
Cns3::int64x64::test::Int64x64DoubleTestCase
Cns3::int64x64::test::Int64x64HiLoTestCase
Cns3::int64x64::test::Int64x64ImplTestCase
Cns3::int64x64::test::Int64x64InputOutputTestCase
Cns3::int64x64::test::Int64x64InputTestCase
Cns3::int64x64::test::Int64x64InvertTestCase
Cns3::LenaDeactivateBearerTestCase
Cns3::olsr::Bug780Test	See Bug 780
Cns3::olsr::HelloRegressionTest	Trivial (still useful) test of OLSR operation
Cns3::olsr::TcRegressionTest	Less trivial test of OLSR Topology Control message generation
Cns3::RlcAmStatusPduTestCase
Cns3::TcpHeaderFlagsToString
Cns3::TcpHeaderGetSetTestCase
Cns3::TcpHeaderWithRFC793OptionTestCase
Cns3::TcpOptionTSTestCase
Cns3::TcpOptionWSTestCase
►Cns3::TestSuite	A suite of tests to run
CAnglesTestSuite
CAnimationInterfaceTestSuite
CAodvRegressionTestSuite
CAsn1EncodingSuite
CAttributesTestSuite
CAverageTestSuite
CBasicDataCalculatorsTestSuite
CBasicEnergyHarvesterTestSuite
CBlockAckTestSuite
CBriteTestSuite
CBufferTestSuite
CBuildingPositionAllocatorTestSuite
CBuildingsHelperTestSuite
CBuildingsPathlossTestSuite	Test 1.1 pathloss calculation
CBuildingsShadowingTestSuite	Test shadowing calculation
CBuildProfileTestSuite
CCallbackTestSuite
CCoDelQueueTestSuite
CCommandLineTestSuite	The Test Suite that glues all of the Test Cases together
CConfigTestSuite
CCosineAntennaModelTestSuite
CCsmaSystemTestSuite
CDcfTestSuite
CDegreesRadiansTestSuite
CDot11sRegressionSuite
CDot11sTestSuite
CDropTailQueueTestSuite
CDsdvTestSuite
CDsrTestSuite
CEpcS1uDlTestSuite	Test that the S1-U interface implementation works correctly
CEpcS1uUlTestSuite	Test that the S1-U interface implementation works correctly
CEpcTftClassifierTestSuite
CEpsGtpuTestSuite
CErrorModelTestSuite
CEventGarbageCollectorTestSuite
CFlameRegressionSuite
CFlameTestSuite
CGeoToCartesianTestSuite
CGlobalRouteManagerImplTestSuite
CGlobalValueTestSuite
CHashTestSuite	Hash functions test suite
CHistogramTestSuite
CIpv4AddressGeneratorTestSuite
CIpv4AddressHelperTestSuite
CIpv4ForwardingTestSuite
CIpv4FragmentationTestSuite
CIpv4GlobalRoutingTestSuite
CIpv4HeaderTestSuite
CIPv4L3ProtocolTestSuite
CIpv4ListRoutingTestSuite
CIpv4PacketInfoTagTestSuite
CIpv4RawTestSuite
CIpv4StaticRoutingTestSuite
CIpv6AddressGeneratorTestSuite
CIpv6AddressHelperTestSuite
CIpv6AddressTestSuite
CIpv6DualStackTestSuite
CIpv6ExtensionHeaderTestSuite
CIpv6ForwardingTestSuite
CIpv6FragmentationTestSuite
CIPv6L3ProtocolTestSuite
CIpv6ListRoutingTestSuite
CIpv6PacketInfoTagTestSuite
CIpv6RawTestSuite
CIpv6RipngTestSuite
CIsotropicAntennaModelTestSuite
CItuR1411LosPropagationLossModelTestSuite
CItuR1411NlosOverRooftopPropagationLossModelTestSuite
CKun2600MhzPropagationLossModelTestSuite
CLenaTestCqaFfMacSchedulerSuite
CLenaTestFdBetFfMacSchedulerSuite
CLenaTestFdMtFfMacSchedulerSuite
CLenaTestFdTbfqFfMacSchedulerSuite
CLenaTestHarqSuite
CLenaTestMimoSuite
CLenaTestPfFfMacSchedulerSuite
CLenaTestPhyErrorModelSuite
CLenaTestPssFfMacSchedulerSuite
CLenaTestRrFfMacSchedulerSuite
CLenaTestTdBetFfMacSchedulerSuite
CLenaTestTdMtFfMacSchedulerSuite
CLenaTestTdTbfqFfMacSchedulerSuite
CLenaTestTtaFfMacSchedulerSuite
CLiIonEnergySourceTestSuite
CLrWpanAckTestSuite
CLrWpanCcaTestSuite
CLrWpanCollisionTestSuite
CLrWpanEdTestSuite
CLrWpanErrorModelTestSuite
CLrWpanPacketTestSuite
CLrWpanPlmeAndPdInterfaceTestSuite
CLrWpanSpectrumValueHelperTestSuite
CLteAntennaTestSuite
CLteCellSelectionTestSuite	Test suite for executing the cell selection test cases in without-EPC and with-EPC scenarios
CLteCqiGenerationTestSuite
CLteDownlinkPowerControlTestSuite	Test 1.1 SINR calculation in downlink
CLteDownlinkSinrTestSuite	Test 1.1 SINR calculation in downlink
CLteEarfcnTestSuite	Test the calculation of carrier frequency based on EARFCN
CLteEpcE2eDataTestSuite	Test that the S1-U interface implementation works correctly
CLteFadingTestSuite	Test 1.1 fading model
CLteFrequencyReuseTestSuite	Test Downlink FFR algorithms
CLteHandoverDelayTestSuite
CLteHandoverTargetTestSuite	Test suite lte-handover-target, verifying that handover algorithms are able to select the right target cell
CLteInterferenceFrTestSuite	Test Interference level with FR algorithms
CLteInterferenceTestSuite	Test that SINR calculation and MCS selection works fine in a multi-cell interference scenario
CLteLinkAdaptationTestSuite	Test 1.3 Link adaptation
CLtePathlossModelTestSuite	Test 1.1 pathloss calculation
CLteRlcAmE2eTestSuite	Provides the test suite lte-rlc-am-e2e
CLteRlcAmTransmitterTestSuite	TestSuite 4.1.1 RLC AM: Only transmitter
CLteRlcUmE2eTestSuite	Test x.x.x RLC UM: End-to-end flow
CLteRlcUmTransmitterTestSuite	TestSuite 4.1.1 RLC UM: Only transmitter
CLteRrcTestSuite
CLteSpectrumValueHelperTestSuite
CLteUeMeasurementsHandoverTestSuite	Test suite for generating calls to UE measurements test case ns3::LteUeMeasurementsHandoverTestCase
CLteUeMeasurementsPiecewiseTestSuite1	Test suite for generating calls to UE measurements test case ns3::LteUeMeasurementsPiecewiseTestCase1
CLteUeMeasurementsPiecewiseTestSuite2	Test suite for generating calls to UE measurements test case ns3::LteUeMeasurementsPiecewiseTestCase2
CLteUeMeasurementsTestSuite	Test that UE Measurements (see 36.214) calculation works fine in a multi-cell interference scenario
CLteUplinkPowerControlTestSuite	Test 1.1 Uplink Power Control
CLteUplinkSinrTestSuite	Test 1.2 SINR calculation in uplink
CLteX2HandoverMeasuresTestSuite
CLteX2HandoverTestSuite
CManyUniformRandomVariablesOneGetValueCallTestSuite
CMeshTestSuite
CMobilityTestSuite
CMobilityTraceTestSuite
CNamesTestSuite
CNs2MobilityHelperTestSuite	The test suite
Cns3::aodv::AodvLoopbackTestSuite
Cns3::aodv::AodvTestSuite
Cns3::aodv::IdCacheTestSuite
Cns3::int64x64::test::Int64x64TestSuite
Cns3::LenaTestBearerDeactivateSuite
Cns3::LteRlcHeaderTestSuite
Cns3::TcpHeaderTestSuite
Cns3::TcpOptionTestSuite
Cns3::TcpTimestampTestSuite
Cns3::TcpWScalingTestSuite
CNs3TcpCwndTestSuite
CNs3TcpInteroperabilityTestSuite
CNs3TcpLossTestSuite
CNs3TcpNoDelayTestSuite
CNs3TcpSocketTestSuite
CNs3TcpStateTestSuite
CNs3WimaxFragmentationTestSuite
CNs3WimaxMacMessagesTestSuite
CNs3WimaxPhyTestSuite
CNs3WimaxQoSTestSuite
CNs3WimaxServiceFlowTestSuite
CNs3WimaxSSMacTestSuite
CNs3WimaxTlvTestSuite
CNscTcpLossTestSuite
CObjectTestSuite
COcbTestSuite
COkumuraHataPropagationLossModelTestSuite
COlsrProtocolTestSuite
COlsrTestSuite
COneUniformRandomVariableManyGetValueCallsTestSuite
CPacketMetadataTestSuite
CPacketSocketAppsTestSuite
CPacketTestSuite
CParabolicAntennaModelTestSuite
CPbbTestSuite
CPcapFileTestSuite
CPointToPointTestSuite	TestSuite for PointToPoint module
CPowerRateAdaptationTestSuite
CProbeTestSuite
CPropagationLossModelsTestSuite
CPtrTestSuite
CRandCartAroundGeoTestSuite
CRandomVariableStreamTestSuite
CRedQueueTestSuite
CRegressionTestSuite
CRngTestSuite
CRocketfuelTopologyReaderTestSuite
CRttEstimatorTestSuite
CSampleTestSuite
CSequenceNumberTestSuite
CSimulatorTestSuite
CSixlowpanFragmentationTestSuite
CSixlowpanHc1TestSuite
CSixlowpanIphcTestSuite
CSpectrumConverterTestSuite
CSpectrumIdealPhyTestSuite
CSpectrumInterferenceTestSuite
CSpectrumValueTestSuite
CSteadyStateRandomWaypointTestSuite
CSwitchTestSuite
CTcpTestSuite
CThreadedSimulatorTestSuite
CTimerTestSuite
CTimeTestSuite
CTracedCallbackTestSuite
CTracedCallbackTypedefTestSuite
CTracedValueCallbackTestSuite
CTvHelperDistributionTestSuite
CTvSpectrumTransmitterTestSuite
CTxDurationTestSuite
CTypeIdPerformanceSuite
CTypeIdTestSuite
CTypeTraitsTestSuite
CUanEnergyModelTestSuite	Unit test suite for underwater energy model
CUanTestSuite
CUdpClientServerTestSuite
CUdpTestSuite
CWatchdogTestSuite
CWaveformGeneratorTestSuite
CWaveMacTestSuite
CWaypointMobilityModelTestSuite
CWifiAggregationTestSuite
CWifiInterferenceTestSuite
CWifiMsduAggregatorTestSuite
CWifiTestSuite
Cns3::TimestampTestCase
Cns3::TimestampValueTestCase
Cns3::WScalingTestCase
CNs3TcpCwndTestCase1
CNs3TcpCwndTestCase2
CNs3TcpInteroperabilityTestCase
CNs3TcpLossTestCase
CNs3TcpNoDelayTestCase
CNs3TcpSocketTestCase1
CNs3TcpSocketTestCase2
CNs3TcpStateTestCase
CNs3WimaxCsParamTlvTestCase
CNs3WimaxFragmentationTestCase
CNs3WimaxManagementConnectionsTestCase
CNs3WimaxNetworkEntryTestCase
CNs3WimaxSchedulingTestCase
CNs3WimaxSfCreationTestCase
CNs3WimaxSfTlvTestCase
CNs3WimaxSFTypeTestCase
CNs3WimaxSimpleOFDMTestCase
CNs3WimaxSNRtoBLERTestCase
CNscTcpLossTestCase1
CNscTcpLossTestCase2
CNullifyCallbackTestCase
CObjectFactoryTestCase
CObjectMapAttributeTestCase
CObjectVectorAttributeTestCase
CObjectVectorConfigTestCase
CObjectVectorTraceConfigTestCase
COcbWifiMacTestCase
COkumuraHataPropagationLossModelTestCase
COlsrEmfTestCase
COlsrHelloTestCase
COlsrHnaTestCase
COlsrMidTestCase
COlsrMprTestCase	Testcase for MPR computation mechanism
COlsrTcTestCase
COneIntegerAverageTestCase
COneIntegerTestCase
COneUniformRandomVariableManyGetValueCallsTestCase
COneVectorConstructorTestCase
CPacketBufferingCaseA	This simple test verifies the correctness of buffering for packets received under block ack
CPacketBufferingCaseB
CPacketLossCounterTestCase	Test that all the PacketLossCounter class checks loss correctly in different cases
CPacketMetadataTest
CPacketSocketAppsTest
CPacketTagListTest
CPacketTest
CParabolicAntennaModelTestCase
CPbbTestCase
CPeerLinkFrameStartTest	Built-in self test for PeerLinkFrameStart
CPeerManagementProtocolRegressionTest	Peering Management Protocol regression test
CPointerAttributeTestCase
CPointToPointTest	Test class for PointToPoint model
CPowerRateAdaptationTest
CProbeTestCase1
CPtrTestCase
CQosUtilsIsOldPacketTest
CRadiansToDegreesTestCase
CRandCartAroundGeoTestCase
CRandomRoomPositionAllocatorTestCase
CRandomVariableStreamAttributeTestCase
CRandomVariableStreamConstantTestCase
CRandomVariableStreamDeterministicTestCase
CRandomVariableStreamEmpiricalAntitheticTestCase
CRandomVariableStreamEmpiricalTestCase
CRandomVariableStreamErlangAntitheticTestCase
CRandomVariableStreamErlangTestCase
CRandomVariableStreamExponentialAntitheticTestCase
CRandomVariableStreamExponentialTestCase
CRandomVariableStreamGammaAntitheticTestCase
CRandomVariableStreamGammaTestCase
CRandomVariableStreamLogNormalAntitheticTestCase
CRandomVariableStreamLogNormalTestCase
CRandomVariableStreamNormalAntitheticTestCase
CRandomVariableStreamNormalTestCase
CRandomVariableStreamParetoAntitheticTestCase
CRandomVariableStreamParetoTestCase
CRandomVariableStreamSequentialTestCase
CRandomVariableStreamUniformAntitheticTestCase
CRandomVariableStreamUniformTestCase
CRandomVariableStreamWeibullAntitheticTestCase
CRandomVariableStreamWeibullTestCase
CRandomVariableStreamZetaAntitheticTestCase
CRandomVariableStreamZetaTestCase
CRandomVariableStreamZipfAntitheticTestCase
CRandomVariableStreamZipfTestCase
CRangePropagationLossModelTestCase
CReadFileTestCase
CReadModeCreateTestCase
CRecordHeaderTestCase
CRedQueueTestCase
CRelativeAddTestCase
CRelativeFindTestCase
CRelativeRenameTestCase
CResetAllocatorHelperTestCase
CRngExponentialTestCase
CRngNormalTestCase
CRngParetoTestCase
CRngUniformTestCase
CRocketfuelTopologyReaderTest
CRootNamespaceConfigTestCase
►CRrcHeaderTestCase	This class provides common functions to be inherited by the children TestCases
CHandoverPreparationInfoTestCase
CMeasurementReportTestCase
CRrcConnectionReconfigurationCompleteTestCase
CRrcConnectionReconfigurationTestCase
CRrcConnectionReestablishmentCompleteTestCase
CRrcConnectionReestablishmentRequestTestCase
CRrcConnectionReestablishmentTestCase
CRrcConnectionRejectTestCase
CRrcConnectionRequestTestCase
CRrcConnectionSetupCompleteTestCase
CRrcConnectionSetupTestCase
CRttEstimatorTestCase
CSameRoomPositionAllocatorTestCase
CSampleTestCase1
CSearchAttributesOfParentObjectsTestCase
CSequenceNumberTestCase
CSimulatorEventsTestCase
CSimulatorTemplateTestCase
CSixlowpanFragmentationTest
CSixlowpanHc1ImplTest
CSixlowpanIphcImplTest
CSpectrumIdealPhyTestCase
CSpectrumInterferenceTestCase
CSpectrumValueTestCase
CSteadyStateRandomWaypointTest
CStringContextAddTestCase
CStringContextFindTestCase
CStringContextRenameTestCase
CSwitchFlowTableTestCase
CTcpTestCase
CTestEmptyOptionField
CTestFulfilledAlignment
CTestOptionWithAlignment
CTestOptionWithoutAlignment
CThreadedSimulatorEventsTestCase
CTimeInputOutputTestCase
CTimerStateTestCase
CTimerTemplateTestCase
CTimeSimpleTestCase
CTimeWithSignTestCase
CTracedCallbackTestCase
CTracedCallbackTypedefTestCase
CTracedValueCallbackTestCase
CTvHelperDistributionTestCase
CTvSpectrumTransmitterTestCase
CTwoLevelAggregationTest
CTwoRayGroundPropagationLossModelTestCase
CTwoVectorsConstructorTestCase
CTxDurationTest
CTypeTraitsTestCase
CUanTest
CUdp6SocketImplTest
CUdp6SocketLoopbackTest
CUdpClientServerTestCase	Test that all the udp packets generated by an udpClient application are correctly received by an udpServer application
CUdpEchoClientSetFillTestCase	Test fix for Bug 1378
CUdpSocketImplTest
CUdpSocketLoopbackTest
CUdpTraceClientServerTestCase	Test that all the udp packets generated by an udpTraceClient application are correctly received by an udpServer application
CUnderRootNamespaceConfigTestCase
CUniqueTypeIdTestCase
CWatchdogTestCase
CWaveformGeneratorTestCase
CWaypointInitialPositionIsWaypoint
CWaypointLazyNotifyFalse
CWaypointLazyNotifyTrue
CWaypointMobilityModelNotifyTest
CWaypointMobilityModelViaHelper
CWifiInterferenceTestCase
CWifiMsduAggregatorThroughputTest
CWifiTest
CWriteModeCreateTestCase
Cns3::TestVectors< T >	A simple way to store test vectors (for stimulus or from responses)
►Cns3::Singleton< ConfigImpl >
Cns3::ConfigImpl	Config system implementation class
►Cns3::Singleton< IidManager >
Cns3::IidManager	TypeId information manager
►Cns3::Singleton< NamesPriv >
Cns3::NamesPriv	The singleton root Names object
►Cns3::Singleton< TestRunnerImpl >
Cns3::TestRunnerImpl	Container for all tests
Cns3::TestVectors< FriisPropagationLossModelTestCase::TestVector >
Cns3::TestVectors< LogDistancePropagationLossModelTestCase::TestVector >
Cns3::TestVectors< Ns3TcpCwndTestCase1::CwndEvent >
Cns3::TestVectors< Ns3TcpCwndTestCase2::CwndEvent >
Cns3::TestVectors< TwoRayGroundPropagationLossModelTestCase::TestVector >
Cns3::TestVectors< uint32_t >
Cns3::Ns2MobilityHelper	Helper class which can read ns-2 movement files and configure nodes mobility
Cns3::NullMessageSentBuffer	Non-blocking send buffers for Null Message implementation
CTypeTraits< T >::NullType	Null value type traits
►CObject
►CTracedCallbackTypedefTestCase::CheckerBase< T1, empty, empty, empty, empty >
CTracedCallbackTypedefTestCase::Checker< T1, empty, empty, empty, empty >
►CTracedCallbackTypedefTestCase::CheckerBase< T1, T2, empty, empty, empty >
CTracedCallbackTypedefTestCase::Checker< T1, T2, empty, empty, empty >
►CTracedCallbackTypedefTestCase::CheckerBase< T1, T2, T3, empty, empty >
CTracedCallbackTypedefTestCase::Checker< T1, T2, T3, empty, empty >
►CTracedCallbackTypedefTestCase::CheckerBase< T1, T2, T3, T4, empty >
CTracedCallbackTypedefTestCase::Checker< T1, T2, T3, T4, empty >
►Cobject
Cflowmon-parse-results.FiveTuple
Cflowmon-parse-results.Flow
Cflowmon-parse-results.Histogram
Cflowmon-parse-results.ProbeFlowStats
Cflowmon-parse-results.Simulation
Cinterface_statistics.StatisticsCollector
Cinterface_statistics.StatisticsCollector.NetDevStats
Csample-simulator.MyModel
►Cvisualizer.base.InformationWindow
Cinterface_statistics.ShowInterfaceStatistics
Cipv4_routing_table.ShowIpv4RoutingTable
Colsr.ShowOlsrRoutingTable
Cshow_last_packets.ShowLastPackets
Cvisualizer.base.NetDeviceTraits
Cvisualizer.core.ShowTransmissionsMode
Cvisualizer.core.Visualizer._PanningState
Cvisualizer.core.Visualizer.NodeDragState
Cvisualizer.hud.Axes
Cwifi_intrastructure_link.WifiLinkMonitor
►Cns3::ObjectBase	Anchor the ns-3 type and attribute system
►Cns3::Chunk	Abstract base class for ns3::Header and ns3::Trailer
►Cns3::Header	Protocol header serialization and deserialization
►Canonymous_namespace{packet-metadata-test.cc}::HistoryHeaderBase
Canonymous_namespace{packet-metadata-test.cc}::HistoryHeader< N >
►Canonymous_namespace{packet-test-suite.cc}::ATestHeaderBase
Canonymous_namespace{packet-test-suite.cc}::ATestHeader< N >
CBenchHeader< N >
CMyHeader
Cns3::AlohaNoackMacHeader	Introspection did not find any typical Config paths
Cns3::AmpduSubframeHeader	Introspection did not find any typical Config paths
Cns3::AmsduSubframeHeader	Introspection did not find any typical Config paths
Cns3::aodv::RerrHeader	Route Error (RERR) Message Format
Cns3::aodv::RrepAckHeader	Route Reply Acknowledgment (RREP-ACK) Message Format
Cns3::aodv::RrepHeader	Route Reply (RREP) Message Format
Cns3::aodv::RreqHeader	Route Request (RREQ) Message Format
Cns3::aodv::TypeHeader	AODV types
Cns3::ArpHeader	The packet header for an ARP packet
►Cns3::Asn1Header	This class has the purpose to encode Information Elements according to ASN.1 syntax, as defined in ITU-T X-691
►Cns3::RrcAsn1Header	This class extends Asn1Header functions, adding serialization/deserialization of some Information elements defined in 3GPP TS 36.331
Cns3::HandoverPreparationInfoHeader	This class manages the serialization/deserialization of HandoverPreparationInfo IE
►Cns3::RrcDlCcchMessage	This class only serves to discriminate which message type has been received in downlink (eNb to ue) for channel CCCH
Cns3::RrcConnectionReestablishmentHeader	This class manages the serialization/deserialization of RrcConnectionReestablishment IE
Cns3::RrcConnectionReestablishmentRejectHeader	This class manages the serialization/deserialization of RrcConnectionReestablishmentReject IE
Cns3::RrcConnectionRejectHeader	This class manages the serialization/deserialization of RrcConnectionReject IE
Cns3::RrcConnectionSetupHeader	This class manages the serialization/deserialization of RrcConnectionSetup IE
►Cns3::RrcDlDcchMessage	This class only serves to discriminate which message type has been received in downlink (eNb to ue) for channel DCCH
Cns3::RrcConnectionReconfigurationHeader	This class manages the serialization/deserialization of RrcConnectionReconfiguration IE
Cns3::RrcConnectionReleaseHeader	This class manages the serialization/deserialization of RrcConnectionRelease IE
►Cns3::RrcUlCcchMessage	This class only serves to discriminate which message type has been received in uplink (ue to eNb) for channel CCCH
Cns3::RrcConnectionReestablishmentRequestHeader	This class manages the serialization/deserialization of RRCConnectionReestablishmentRequest IE
Cns3::RrcConnectionRequestHeader	This class manages the serialization/deserialization of RrcConnectionRequest IE
►Cns3::RrcUlDcchMessage	This class only serves to discriminate which message type has been received in uplink (ue to eNb) for channel DCCH
Cns3::MeasurementReportHeader	This class manages the serialization/deserialization of MeasurementReport IE
Cns3::RrcConnectionReconfigurationCompleteHeader	This class manages the serialization/deserialization of RrcConnectionSetupComplete IE
Cns3::RrcConnectionReestablishmentCompleteHeader	This class manages the serialization/deserialization of RrcConnectionReestablishmentComplete IE
Cns3::RrcConnectionSetupCompleteHeader	This class manages the serialization/deserialization of RrcConnectionSetupComplete IE
Cns3::BandwidthRequestHeader	This class implements the bandwidth-request mac Header as described by IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems 6.3.2.1.2 Bandwidth request header, page 38
Cns3::CtrlBAckRequestHeader	Headers for Block ack request
Cns3::CtrlBAckResponseHeader	Headers for Block ack response
Cns3::Dcd	Introspection did not find any typical Config paths
Cns3::DlMap	Introspection did not find any typical Config paths
Cns3::dot11s::MeshHeader	Mesh Control field, see IEEE 802.11s draft 3.0 section 7.1.3.5b
Cns3::dot11s::PeerLinkCloseStart	802.11s Peer link close management frame
Cns3::dot11s::PeerLinkConfirmStart	802.11s Peer link confirm management frame
Cns3::dot11s::PeerLinkOpenStart	802.11s Peer link open management frame
Cns3::DsaAck	Introspection did not find any typical Config paths
Cns3::DsaReq	Introspection did not find any typical Config paths
Cns3::DsaRsp	Introspection did not find any typical Config paths
Cns3::dsdv::DsdvHeader	DSDV Update Packet Format
►Cns3::dsr::DsrFsHeader	Dsr fixed size header Format
Cns3::dsr::DsrRoutingHeader	Header of Dsr Routing
►Cns3::dsr::DsrOptionHeader	Introspection did not find any typical Config paths
Cns3::dsr::DsrOptionAckHeader	Acknowledgement (ACK) Message Format
Cns3::dsr::DsrOptionAckReqHeader	Acknowledgement Request (ACK_RREQ) Message Format
Cns3::dsr::DsrOptionPad1Header	Introspection did not find any typical Config paths
Cns3::dsr::DsrOptionPadnHeader	Introspection did not find any typical Config paths
►Cns3::dsr::DsrOptionRerrHeader	Introspection did not find any typical Config paths
Cns3::dsr::DsrOptionRerrUnreachHeader	Route Error (RERR) Unreachable node address option Message Format
Cns3::dsr::DsrOptionRerrUnsupportHeader	Route Error (RERR) Unsupported option Message Format
Cns3::dsr::DsrOptionRrepHeader	Route Reply (RREP) Message Format
Cns3::dsr::DsrOptionRreqHeader	Route Request (RREQ) Message Format
Cns3::dsr::DsrOptionSRHeader	Source Route (SR) Message Format
Cns3::EpcX2HandoverPreparationFailureHeader	Introspection did not find any typical Config paths
Cns3::EpcX2HandoverRequestAckHeader	Introspection did not find any typical Config paths
Cns3::EpcX2HandoverRequestHeader	Introspection did not find any typical Config paths
Cns3::EpcX2Header	Introspection did not find any typical Config paths
Cns3::EpcX2LoadInformationHeader	Introspection did not find any typical Config paths
Cns3::EpcX2ResourceStatusUpdateHeader	Introspection did not find any typical Config paths
Cns3::EpcX2SnStatusTransferHeader	Introspection did not find any typical Config paths
Cns3::EpcX2UeContextReleaseHeader	Introspection did not find any typical Config paths
Cns3::EthernetHeader	Packet header for Ethernet
Cns3::flame::FlameHeader	Flame header
Cns3::FragmentationSubheader	This class implements the fragmentation sub-header as described by IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems 6.3.2.2.1 Fragmentation subheader, page 39
Cns3::GenericMacHeader	This class implements the Generic mac Header as described by IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems 6.3.2.1.1 Generic MAC header, page 36
Cns3::GrantManagementSubheader	Introspection did not find any typical Config paths
Cns3::GtpuHeader	Implementation of the GTPv1-U Release 10 as per 3Gpp TS 29.281 document
Cns3::Icmpv4DestinationUnreachable	Introspection did not find any typical Config paths
Cns3::Icmpv4Echo	Introspection did not find any typical Config paths
Cns3::Icmpv4Header	Introspection did not find any typical Config paths
Cns3::Icmpv4TimeExceeded	Introspection did not find any typical Config paths
►Cns3::Icmpv6Header	Introspection did not find any typical Config paths
Cns3::Icmpv6DestinationUnreachable	Introspection did not find any typical Config paths
Cns3::Icmpv6Echo	Introspection did not find any typical Config paths
Cns3::Icmpv6NA	Introspection did not find any typical Config paths
Cns3::Icmpv6NS	Introspection did not find any typical Config paths
Cns3::Icmpv6ParameterError	Introspection did not find any typical Config paths
Cns3::Icmpv6RA	Introspection did not find any typical Config paths
Cns3::Icmpv6Redirection	Introspection did not find any typical Config paths
Cns3::Icmpv6RS	Introspection did not find any typical Config paths
Cns3::Icmpv6TimeExceeded	Introspection did not find any typical Config paths
Cns3::Icmpv6TooBig	Introspection did not find any typical Config paths
►Cns3::Icmpv6OptionHeader	Introspection did not find any typical Config paths
Cns3::Icmpv6OptionLinkLayerAddress	Introspection did not find any typical Config paths
Cns3::Icmpv6OptionMtu	Introspection did not find any typical Config paths
Cns3::Icmpv6OptionPrefixInformation	Introspection did not find any typical Config paths
Cns3::Icmpv6OptionRedirected	Introspection did not find any typical Config paths
Cns3::IdealHandoverCommandHeader
Cns3::IdealHandoverPreparationInfoHeader
Cns3::Ipv4Header	Packet header for IPv4
►Cns3::Ipv6ExtensionHeader	Introspection did not find any typical Config paths
Cns3::Ipv6ExtensionAHHeader	Introspection did not find any typical Config paths
Cns3::Ipv6ExtensionDestinationHeader	Introspection did not find any typical Config paths
Cns3::Ipv6ExtensionESPHeader	Introspection did not find any typical Config paths
Cns3::Ipv6ExtensionFragmentHeader	Introspection did not find any typical Config paths
Cns3::Ipv6ExtensionHopByHopHeader	Introspection did not find any typical Config paths
►Cns3::Ipv6ExtensionRoutingHeader	Introspection did not find any typical Config paths
Cns3::Ipv6ExtensionLooseRoutingHeader	Introspection did not find any typical Config paths
Cns3::Ipv6Header	Introspection did not find any typical Config paths
►Cns3::Ipv6OptionHeader	Introspection did not find any typical Config paths
Cns3::Ipv6OptionJumbogramHeader	Introspection did not find any typical Config paths
Cns3::Ipv6OptionPad1Header	Introspection did not find any typical Config paths
Cns3::Ipv6OptionPadnHeader	Introspection did not find any typical Config paths
Cns3::Ipv6OptionRouterAlertHeader	Introspection did not find any typical Config paths
COptionWithAlignmentHeader
COptionWithoutAlignmentHeader
Cns3::LlcSnapHeader	Header for the LLC/SNAP encapsulation
Cns3::LrWpanMacHeader	Represent the Mac Header with the Frame Control and Sequence Number fields
Cns3::LtePdcpHeader	The packet header for the Packet Data Convergence Protocol (PDCP) packets
Cns3::LteRlcAmHeader	The packet header for the AM Radio Link Control (RLC) protocol packets
Cns3::LteRlcHeader	The packet header for the Radio Link Control (RLC) protocol packets
Cns3::MacHeaderType	Represents the HT (Header Type) field of generic MAC and bandwidth request headers
Cns3::ManagementMessageType	Introspection did not find any typical Config paths
Cns3::MgtAddBaRequestHeader	Implement the header for management frames of type add block ack request
Cns3::MgtAddBaResponseHeader	Implement the header for management frames of type add block ack response
Cns3::MgtAssocRequestHeader	Implement the header for management frames of type association request
Cns3::MgtAssocResponseHeader	Implement the header for management frames of type association response
Cns3::MgtDelBaHeader	Implement the header for management frames of type del block ack
Cns3::MgtProbeRequestHeader	Implement the header for management frames of type probe request
►Cns3::MgtProbeResponseHeader	Implement the header for management frames of type probe response
Cns3::MgtBeaconHeader	Implement the header for management frames of type beacon
Cns3::OfdmDownlinkFramePrefix
Cns3::olsr::MessageHeader	Introspection did not find any typical Config paths
Cns3::olsr::PacketHeader	Introspection did not find any typical Config paths
Cns3::PppHeader	Packet header for PPP
Cns3::RadiotapHeader	Radiotap header implementation
Cns3::RipNgHeader	RipNgHeader - see RFC 2080
Cns3::RipNgRte	RipNg Routing Table Entry (RTE) - see RFC 2080
Cns3::RngReq	Introspection did not find any typical Config paths
Cns3::RngRsp	Introspection did not find any typical Config paths
Cns3::SeqTsHeader	Introspection did not find any typical Config paths
Cns3::SixLowPanFrag1	6LoWPAN FRAG1 header - see RFC 4944
Cns3::SixLowPanFragN	6LoWPAN FRAGN header - see RFC 4944
Cns3::SixLowPanHc1	6LoWPAN HC1 header - see RFC 4944
Cns3::SixLowPanIphc	LOWPAN_IPHC base Encoding - see RFC 6282
Cns3::SixLowPanIpv6	6LoWPAN IPv6 uncompressed header - see RFC 4944
Cns3::SixLowPanNhcExtension	LOWPAN_NHC Extension Header Encoding - see RFC 6282
Cns3::SixLowPanUdpNhcExtension	UDP LOWPAN_NHC Extension Header Encoding - see RFC 6282
Cns3::TcpHeader	Header for the Transmission Control Protocol
Cns3::Tlv	This class implements the Type-Len-Value structure channel encodings as described by "IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems"
Cns3::UanHeaderCommon	Common packet header fields
Cns3::UanHeaderRcAck	Header used for ACK packets by protocol UanMacRc
Cns3::UanHeaderRcCts	CTS header
Cns3::UanHeaderRcCtsGlobal	Cycle broadcast information
Cns3::UanHeaderRcData	Extra data header information
Cns3::UanHeaderRcRts	RTS header
Cns3::Ucd	Introspection did not find any typical Config paths
Cns3::UdpHeader	Packet header for UDP packets
Cns3::UlMap	Introspection did not find any typical Config paths
Cns3::VendorSpecificActionHeader	See IEEE 802.11-2007 chapter 7.3.1.11 and 7.4.5 also IEEE 802.11p-2010 chapter 7.4.5 Although WifiActionHeader has been defined in wifi mgt-header.h/.cc, it is not a good way to inherit from it or add vendor specific action support
Cns3::WifiActionHeader	See IEEE 802.11 chapter 7.3.1.11 Header format: | category: 1 | action value: 1 |
►Cns3::WifiInformationElementVector	Information element vectorImplements a vector of WifiInformationElements
Cns3::MeshInformationElementVector	Introspection did not find any typical Config paths
Cns3::WifiMacHeader	Implements the IEEE 802.11 MAC header
Cns3::WimaxMacToMacHeader	This class implements the mac to mac header needed to dump a wimax pcap file The header format was reverse-engineered by looking at existing live pcap traces which could be opened with wireshark i.e., we have no idea where this is coming from
►Cns3::SimpleRefCount< PbbPacket, Header >
Cns3::PbbPacket	Main PacketBB Packet object
►Cns3::Trailer	Protocol trailer serialization and deserialization
►Canonymous_namespace{packet-metadata-test.cc}::HistoryTrailerBase
Canonymous_namespace{packet-metadata-test.cc}::HistoryTrailer< N >
►Canonymous_namespace{packet-test-suite.cc}::ATestTrailerBase
Canonymous_namespace{packet-test-suite.cc}::ATestTrailer< N >
Cns3::EthernetTrailer	Packet trailer for Ethernet
Cns3::LrWpanMacTrailer	Represent the Mac Trailer with the Frame Check Sequence field
Cns3::WifiMacTrailer	Implements the IEEE 802.11 MAC trailer
Cns3::ConfigStore	Introspection did not find any typical Config paths
►Cns3::Tag	Tag a set of bytes in a packet
►Canonymous_namespace{packet-test-suite.cc}::ATestTagBase
Canonymous_namespace{packet-test-suite.cc}::ATestTag< N >
CBenchTag< N >
CIPv4TestTag
CIPv6TestTag
CMyTag
Cns3::AmpduTag	The aim of the AmpduTag is to provide means for a MAC to specify that a packet includes A-MPDU since this is done in HT-SIG and there is no HT-SIG representation in ns-3
Cns3::AnimByteTag	Byte tag using by Anim to uniquely identify packets
Cns3::aodv::DeferredRouteOutputTag	Tag used by AODV implementation
Cns3::CoDelTimestampTag	CoDel time stamp, used to carry CoDel time informations
Cns3::DelayJitterEstimationTimestampTag	Tag to perform Delay and Jitter estimations
Cns3::DeviceNameTag	This class implements a tag that carries the ns3 device name from where a packet is coming
Cns3::dot11s::HwmpTag	Hwmp tag implements interaction between HWMP protocol and MeshWifiMac
Cns3::dsdv::DeferredRouteOutputTag	Tag used by DSDV implementation
Cns3::EpsBearerTag	Tag used to define the RNTI and EPS bearer ID for packets interchanged between the EpcEnbApplication and the LteEnbNetDevice
Cns3::flame::FlameTag	Transmitter and receiver addresses
Cns3::FlowIdTag	Introspection did not find any typical Config paths
Cns3::HigherLayerTxVectorTag	This tag will be used to support higher layer control DataRate and TxPwr_Level for transmission
Cns3::HighLatencyCtsToSelfTxVectorTag
Cns3::HighLatencyDataTxVectorTag
Cns3::HighLatencyRtsTxVectorTag
Cns3::Ipv4FlowProbeTag	Tag used to allow a fast identification of the packet
Cns3::Ipv4PacketInfoTag	This class implements Linux struct pktinfo in order to deliver ancillary information to the socket interface
Cns3::Ipv6FlowProbeTag	Tag used to allow a fast identification of the packet
Cns3::Ipv6PacketInfoTag	This class implements a tag that carries socket ancillary data to the socket interface
Cns3::LrWpanLqiTag	Introspection did not find any typical Config paths
Cns3::LtePhyTag	Tag used to define PHY parameters
Cns3::LteRadioBearerTag	Tag used to define the RNTI and LC id for each MAC packet trasmitted
Cns3::LteRlcSduStatusTag	This class implements a tag that carries the status of a RLC SDU for the fragmentation process Status of RLC SDU
Cns3::PacketSocketTag	This class implements a tag that carries the dest address of a packet and the packet type
Cns3::PdcpTag	Tag to calculate the per-PDU delay from eNb PDCP to UE PDCP
Cns3::PyVizPacketTag
Cns3::QosTag	The aim of the QosTag is to provide means for an Application to specify the TID which will be used by a QoS-aware WifiMac for a given traffic flow
Cns3::RlcTag	Tag to calculate the per-PDU delay from eNb RLC to UE RLC
Cns3::SimpleTag	SimpleNetDevice tag to store source, destination and protocol of each packet
Cns3::SnrTag	Introspection did not find any typical Config paths
Cns3::SocketAddressTag	This class implements a tag that carries an address of a packet across the socket interface
Cns3::SocketIpTosTag	Indicates whether the socket has IP_TOS set
Cns3::SocketIpTtlTag	This class implements a tag that carries the socket-specific TTL of a packet to the IP layer
Cns3::SocketIpv6HopLimitTag	This class implements a tag that carries the socket-specific HOPLIMIT of a packet to the IPv6 layer
Cns3::SocketIpv6TclassTag	Indicates whether the socket has IPV6_TCLASS set
Cns3::SocketSetDontFragmentTag	Indicates whether packets should be sent out with the DF (Don't Fragment) flag set
CTimestampTag
►Cns3::SimpleRefCount< Object, ObjectBase, ObjectDeleter >
►Cns3::Object	A base class which provides memory management and object aggregation
CAlternateTestObject
►Canonymous_namespace{object-test-suite.cc}::BaseA
Canonymous_namespace{object-test-suite.cc}::DerivedA
►Canonymous_namespace{object-test-suite.cc}::BaseB
Canonymous_namespace{object-test-suite.cc}::DerivedB
CAttributeObjectTest
►CBaseConfigObject
CDerivedConfigObject
CConfigExample
►CConfigTestObject
CDerivedConfigTestObject
CDerived
CEmitter
CEmitter
CEmitter
CEmitter
CMyObject
►Cns3::AntennaModel	Interface for antenna radiation pattern models
Cns3::CosineAntennaModel	Cosine Antenna Model
Cns3::IsotropicAntennaModel	Isotropic antenna model
Cns3::ParabolicAntennaModel	Antenna model based on a parabolic approximation of the main lobe radiation pattern
►Cns3::Application	The base class for all ns3 applications
CEpsBearerTagUdpClient
CMyApp
CMyApp
CMyApp
Cns3::BsmApplication	Sends and receives the IEEE 1609 WAVE (Wireless Access in Vehicular Environments) Basic Safety Messages (BSMs) and uses the WaveBsmStats class to manage statistics about BSMs transmitted and received The BSM is a ~200-byte packet that is generally broadcast from every vehicle at a nominal rate of 10 Hz
Cns3::BulkSendApplication	Send as much traffic as possible, trying to fill the bandwidth
Cns3::EpcEnbApplication	This application is installed inside eNBs and provides the bridge functionality for user data plane packets between the radio interface and the S1-U interface
Cns3::EpcSgwPgwApplication	This application implements the SGW/PGW functionality
Cns3::OnOffApplication	Generate traffic to a single destination according to an OnOff pattern
Cns3::PacketSink	Receive and consume traffic generated to an IP address and port
Cns3::PacketSocketClient	A simple client
Cns3::PacketSocketServer	A server using PacketSocket
Cns3::Ping6	A ping6 application
Cns3::Radvd	Router advertisement daemon
Cns3::SocketWriter
Cns3::UdpClient	A Udp client
Cns3::UdpEchoClient	A Udp Echo client
Cns3::UdpEchoServer	A Udp Echo server
Cns3::UdpServer	A UDP server, receives UDP packets from a remote host
Cns3::UdpTraceClient	Default trace to send
Cns3::V4Ping	Application which sends one ICMP ECHO request, waits for a REPLYs and reports the calculated RTT
CReceiver
CSender
CSimpleSource
Cns3::ArpCache	An ARP cache
Cns3::ArpL3Protocol	An implementation of the ARP protocol
Cns3::AthstatsWifiTraceSink	Trace sink for wifi device that mimics madwifi's athstats tool
Cns3::BandwidthManager	This class manage the bandwidth request and grant mechanism
Cns3::BSLinkManager
►Cns3::BSScheduler
Cns3::BSSchedulerRtps	This class implements a simple downlink scheduler for rtPS flows
Cns3::BSSchedulerSimple
Cns3::Building	3d building block
Cns3::BuildingListPriv	Private implementation detail of the BuildingList API
Cns3::BurstProfileManager
►Cns3::Channel	Abstract Channel Base Class
Cns3::BridgeChannel	Virtual channel implementation for bridges (BridgeNetDevice)
Cns3::CsmaChannel	Csma Channel
►Cns3::PointToPointChannel	Simple Point To Point Channel
Cns3::PointToPointRemoteChannel	A Remote Point-To-Point Channel
►Cns3::SimpleChannel	A simple channel, for simple things and testing
Cns3::ErrorChannel	A Error channel, introducing deterministic delays on even/odd packets
Cns3::ErrorChannelSixlow	A Error channel, introducing deterministic delays on even/odd packets
►Cns3::SpectrumChannel	Defines the interface for spectrum-aware channel implementations
Cns3::MultiModelSpectrumChannel	This SpectrumChannel implementation can handle the presence of SpectrumPhy instances which can use different spectrum models, i.e., different SpectrumModel
Cns3::SingleModelSpectrumChannel	SpectrumChannel implementation which handles a single spectrum model
Cns3::UanChannel	Channel class used by UAN devices
►Cns3::WifiChannel	Wifi Channel interface specificationThis class works in tandem with the ns3::WifiPhy class
Cns3::YansWifiChannel	A Yans wifi channelThis wifi channel implements the propagation model described in "Yet Another Network Simulator", (http://cutebugs.net/files/wns2-yans.pdf)
►Cns3::WimaxChannel
Cns3::SimpleOfdmWimaxChannel
Cns3::ChannelCoordinator	ChannelCoordinator deals with channel coordination in data plane (see 1609.4 chapter 5.2)
Cns3::ChannelListPriv	Private implementation detail of the ChannelList API
Cns3::ChannelManager	Manage 7 WaveChannels and the tx information such as data rate and txPowerLevel
►Cns3::ChannelScheduler	This class will assign channel access for requests from higher layers
Cns3::DefaultChannelScheduler	This class uses a simple mechanism to assign channel access with following features: (1) only in the context of single-PHY device; (2) FCFS (First come First service) strategy, which seems against the description of the standard (preemptive strategy)
Cns3::ConnectionManager	The same connection manager class serves both for BS and SS though some functions are exclusive to only one of them
►Cns3::DataCalculator	Calculates data during a simulation
►Cns3::CounterCalculator< uint32_t >
Cns3::PacketCounterCalculator	A stat for counting packets
Cns3::CounterCalculator<>
Cns3::MinMaxAvgTotalCalculator< double >
►Cns3::MinMaxAvgTotalCalculator< uint32_t >
Cns3::PacketSizeMinMaxAvgTotalCalculator	A stat for collecting packet size statistics: min, max and average
Cns3::MinMaxAvgTotalCalculator< uint64_t >
Cns3::CounterCalculator< T >	Template class CounterCalculator
Cns3::MinMaxAvgTotalCalculator< T >	Template class MinMaxAvgTotalCalculator
Cns3::TimeMinMaxAvgTotalCalculator	Unfortunately, templating the base MinMaxAvgTotalCalculator to operate over Time values isn't straightforward
►Cns3::DataCollectionObject	Base class for data collection framework objects
Cns3::FileAggregator	This aggregator sends values it receives to a file
Cns3::GnuplotAggregator	This aggregator produces output used to make gnuplot plots
►Cns3::Probe	Base class for probes
Cns3::ApplicationPacketProbe	Probe to translate from a TraceSource to two more easily parsed TraceSources
Cns3::BooleanProbe	This class is designed to probe an underlying ns3 TraceSource exporting a bool
Cns3::DoubleProbe	This class is designed to probe an underlying ns3 TraceSource exporting a double
Cns3::Ipv4PacketProbe	This class is designed to probe an underlying ns3 TraceSource exporting a packet, an IPv4 object, and an interface
Cns3::Ipv6PacketProbe	This class is designed to probe an underlying ns3 TraceSource exporting a packet, an IPv6 object, and an interface
Cns3::PacketProbe	This class is designed to probe an underlying ns3 TraceSource exporting a packet
Cns3::TimeProbe	This class is designed to probe an underlying ns3 TraceSource exporting an ns3::Time
Cns3::Uinteger16Probe	This class is designed to probe an underlying ns3 TraceSource exporting an uint16_t
Cns3::Uinteger32Probe	This class is designed to probe an underlying ns3 TraceSource exporting an uint32_t
Cns3::Uinteger8Probe	This class is designed to probe an underlying ns3 TraceSource exporting an uint8_t
Cns3::TimeSeriesAdaptor	Takes probed values of different types and outputs the current time plus the value with both converted to doubles
Cns3::DataCollector	Collects data
►Cns3::DataOutputInterface	Abstract Data Output Interface class s
Cns3::OmnetDataOutput	Outputs data in a format compatible with OMNeT library and framework
Cns3::SqliteDataOutput	Outputs data in a format compatible with SQLite
►Cns3::Dcf	Introspection did not find any typical Config paths
Cns3::DcaTxop	Handle packet fragmentation and retransmissions
Cns3::EdcaTxopN	This queue contains packets for a particular access class
►Cns3::DeviceEnergyModel	Base class for device energy models
Cns3::AcousticModemEnergyModel	WHOI micro-modem energy model
Cns3::SimpleDeviceEnergyModel	A simple device energy model where current drain can be set by the user
Cns3::WifiRadioEnergyModel	A WiFi radio energy model
Cns3::dot11s::AirtimeLinkMetricCalculator	Airtime link metric calculator
Cns3::dot11s::HwmpRtable	Routing table for HWMP – 802.11s routing protocol
Cns3::dot11s::PeerLink	Peer link model for 802.11s Peer Management protocol
Cns3::dot11s::PeerManagementProtocol	802.11s Peer Management Protocol model
Cns3::dsr::DsrNetworkQueue	Introspection did not find any typical Config paths
►Cns3::dsr::DsrOptions	Introspection did not find any typical Config paths
Cns3::dsr::DsrOptionAck	Introspection did not find any typical Config paths
Cns3::dsr::DsrOptionAckReq	Introspection did not find any typical Config paths
Cns3::dsr::DsrOptionPad1	Introspection did not find any typical Config paths
Cns3::dsr::DsrOptionPadn	Introspection did not find any typical Config paths
Cns3::dsr::DsrOptionRerr	Introspection did not find any typical Config paths
Cns3::dsr::DsrOptionRrep	Introspection did not find any typical Config paths
Cns3::dsr::DsrOptionRreq	Introspection did not find any typical Config paths
Cns3::dsr::DsrOptionSR	Introspection did not find any typical Config paths
Cns3::dsr::GraReply	Maintain the gratuitous reply
Cns3::dsr::PassiveBuffer	DSR passive buffer
Cns3::dsr::RouteCache	DSR route request queue Since DSR is an on demand routing we queue requests while looking for route
Cns3::dsr::RreqTable	Maintain list of RreqTable entry
►Cns3::EnergyHarvester	Energy harvester base class
Cns3::BasicEnergyHarvester	BasicEnergyHarvester increases remaining energy stored in an associated Energy Source
Cns3::EnergyHarvesterContainer	Holds a vector of ns3::EnergyHarvester pointers
►Cns3::EnergySource	Introspection did not find any typical Config paths
Cns3::BasicEnergySource	BasicEnergySource decreases/increases remaining energy stored in itself in linearly
Cns3::LiIonEnergySource	Model a generic Lithium Ion Battery basing on [1][2]
Cns3::RvBatteryModel	Rakhmatov Vrudhula non-linear battery model
Cns3::EnergySourceContainer	Holds a vector of ns3::EnergySource pointers
►Cns3::EpcHelper	Base helper class to handle the creation of the EPC entities
Cns3::EmuEpcHelper	Create an EPC network using EmuFdNetDevice
Cns3::PointToPointEpcHelper	Create an EPC network with PointToPoint links
Cns3::EpcMme	This object implements the MME functionality
Cns3::EpcTestRrc	RRC stub providing a testing S1 SAP user to be used with the EpcEnbApplication
Cns3::EpcUeNas
Cns3::EpcX2	This entity is installed inside an eNB and provides the functionality for the X2 interface
►Cns3::ErrorModel	General error model that can be used to corrupt packets
Cns3::BinaryErrorModel
Cns3::BinaryErrorSixlowModel
Cns3::BurstErrorModel	Determine which bursts of packets are errored corresponding to an underlying distribution, burst rate, and burst size
Cns3::ListErrorModel	Provide a list of Packet uids to corrupt
Cns3::RateErrorModel	Determine which packets are errored corresponding to an underlying distribution, rate, and unit
Cns3::ReceiveListErrorModel	Provide a list of Packets to corrupt
►Cns3::ErrorRateModel	Interface for Wifi's error models
Cns3::NistErrorRateModel	A model for the error rate for different modulations
Cns3::YansErrorRateModel	Model the error rate for different modulations
►Cns3::FfMacScheduler	This abstract base class identifies the interface by means of which the helper object can plug on the MAC a scheduler implementation based on the FF MAC Sched API
Cns3::CqaFfMacScheduler	Implements the SCHED SAP and CSCHED SAP for the Channel and QoS Aware Scheduler
Cns3::FdBetFfMacScheduler	Implements the SCHED SAP and CSCHED SAP for a Frequency Domain Blind Equal Throughput scheduler
Cns3::FdMtFfMacScheduler	Implements the SCHED SAP and CSCHED SAP for a Frequency Domain Maximize Throughput scheduler
Cns3::FdTbfqFfMacScheduler	Implements the SCHED SAP and CSCHED SAP for a Frequency Domain Token Bank Fair Queue scheduler
Cns3::PfFfMacScheduler	Implements the SCHED SAP and CSCHED SAP for a Proportional Fair scheduler
Cns3::PssFfMacScheduler	Implements the SCHED SAP and CSCHED SAP for a Priority Set scheduler
Cns3::RrFfMacScheduler	Implements the SCHED SAP and CSCHED SAP for a Round Robin scheduler
Cns3::TdBetFfMacScheduler	Implements the SCHED SAP and CSCHED SAP for a Time Domain Blind Equal Throughput scheduler
Cns3::TdMtFfMacScheduler	Implements the SCHED SAP and CSCHED SAP for a Time Domain Maximize Throughput scheduler
Cns3::TdTbfqFfMacScheduler	Implements the SCHED SAP and CSCHED SAP for a Time Domain Token Bank Fair Queue scheduler
Cns3::TtaFfMacScheduler	Implements the SCHED SAP and CSCHED SAP for a Throughput to Average scheduler
Cns3::flame::FlameRtable	Routing table for FLAME
Cns3::FlowMonitor	An object that monitors and reports back packet flows observed during a simulation
►Cns3::FlowProbe	Responsible for listening for packet events in a specific point of the simulated space, report those events to the global FlowMonitor, and collect its own flow statistics regarding only the packets that pass through that probe
Cns3::Ipv4FlowProbe	Class that monitors flows at the IPv4 layer of a Node
Cns3::Ipv6FlowProbe	Class that monitors flows at the IPv6 layer of a Node
Cns3::GlobalRouter	An interface aggregated to a node to provide global routing info
Cns3::GrantedTimeWindowMpiInterface	Interface between ns-3 and MPI
Cns3::GridBuildingAllocator	Allocate buildings on a rectangular 2d grid
Cns3::IpcsClassifier
►Cns3::IpL4Protocol	L4 Protocol abstract base class
Cns3::dsr::DsrRouting	Dsr Routing base
Cns3::Icmpv4L4Protocol
Cns3::Icmpv6L4Protocol	An implementation of the ICMPv6 protocol
Cns3::NscTcpL4Protocol	Nsc wrapper glue, to interface with the Ipv4 protocol underneath
Cns3::TcpL4Protocol	Tcp socket creation and multiplexing/demultiplexing
Cns3::UdpL4Protocol	Implementation of the UDP protocol
►Cns3::Ipv4	Access to the Ipv4 forwarding table, interfaces, and configuration
Cns3::Ipv4L3ClickProtocol	Implement the Ipv4 layer specifically for Click nodes to allow a clean integration of Click
Cns3::Ipv4L3Protocol	Implement the Ipv4 layer
Cns3::Ipv4Interface	The IPv4 representation of a network interface
►Cns3::Ipv4RoutingProtocol	Abstract base class for IPv4 routing protocols
CIpv4ARouting
CIpv4BRouting
Cns3::aodv::RoutingProtocol	AODV routing protocol
Cns3::dsdv::RoutingProtocol	DSDV routing protocol
Cns3::Ipv4ClickRouting	Class to allow a node to use Click for external routing
Cns3::Ipv4GlobalRouting	Global routing protocol for IP version 4 stacks
Cns3::Ipv4ListRouting	This class is a specialization of Ipv4RoutingProtocol that allows other instances of Ipv4RoutingProtocol to be inserted in a prioritized list
Cns3::Ipv4NixVectorRouting	Nix-vector routing protocol
Cns3::Ipv4StaticRouting	Static routing protocol for IP version 4 stacks
Cns3::olsr::RoutingProtocol	OLSR routing protocol for IPv4
►Cns3::Ipv6	Access to the IPv6 forwarding table, interfaces, and configuration
Cns3::Ipv6L3Protocol	IPv6 layer implementation
Cns3::Ipv6AutoconfiguredPrefix	Router prefix information
►Cns3::Ipv6Extension	Introspection did not find any typical Config paths
Cns3::Ipv6ExtensionAH	Introspection did not find any typical Config paths
Cns3::Ipv6ExtensionDestination	Introspection did not find any typical Config paths
Cns3::Ipv6ExtensionESP	Introspection did not find any typical Config paths
Cns3::Ipv6ExtensionFragment	Introspection did not find any typical Config paths
Cns3::Ipv6ExtensionHopByHop	Introspection did not find any typical Config paths
►Cns3::Ipv6ExtensionRouting	Introspection did not find any typical Config paths
Cns3::Ipv6ExtensionLooseRouting	Introspection did not find any typical Config paths
Cns3::Ipv6ExtensionDemux	Introspection did not find any typical Config paths
Cns3::Ipv6ExtensionRoutingDemux	Introspection did not find any typical Config paths
Cns3::Ipv6Interface	The IPv6 representation of a network interface
►Cns3::Ipv6Option	Introspection did not find any typical Config paths
Cns3::Ipv6OptionJumbogram	Introspection did not find any typical Config paths
Cns3::Ipv6OptionPad1	Introspection did not find any typical Config paths
Cns3::Ipv6OptionPadn	Introspection did not find any typical Config paths
Cns3::Ipv6OptionRouterAlert	Introspection did not find any typical Config paths
Cns3::Ipv6OptionDemux	Introspection did not find any typical Config paths
Cns3::Ipv6PmtuCache	This class implements the Path MTU cache, as defined by RFC 1981
►Cns3::Ipv6RoutingProtocol	Abstract base class for Ipv6 routing protocols
CIpv6ARouting
CIpv6BRouting
Cns3::Ipv6ListRouting	Introspection did not find any typical Config paths
Cns3::Ipv6StaticRouting	Introspection did not find any typical Config paths
Cns3::RipNg	RIPng Routing Protocol, defined in RFC 2080
Cns3::JakesProcess	Implementation for a single path Stationary Jakes propagation loss model
Cns3::LrWpanCsmaCa	This class is a helper for the LrWpanMac to manage the Csma/CA state machine according to IEEE 802.15.4-2006, section 7.5.1.4
Cns3::LrWpanErrorModel	Model the error rate for IEEE 802.15.4 2.4 GHz AWGN channel for OQPSK the model description can be found in IEEE Std 802.15.4-2006, section E.4.1.7
Cns3::LrWpanMac	Class that implements the LR-WPAN Mac state machine
Cns3::LteAmc	Implements the Adaptive Modulation And Coding Scheme
Cns3::LteAnr	Automatic Neighbour Relation function
Cns3::LteEnbMac	This class implements the MAC layer of the eNodeB device
Cns3::LteEnbRrc	The LTE Radio Resource Control entity at the eNB
Cns3::LteEnbRrcProtocolIdeal	Models the transmission of RRC messages from the UE to the eNB in an ideal fashion, without errors and without consuming any radio resources
Cns3::LteEnbRrcProtocolReal	Models the transmission of RRC messages from the UE to the eNB in a real fashion, by creating real RRC PDUs and transmitting them over Signaling Radio Bearers using radio resources allocated by the LTE MAC scheduler
►Cns3::LteFfrAlgorithm	The abstract base class of a Frequency Reuse algorithm
Cns3::LteFfrDistributedAlgorithm	Distributed Fractional Frequency Reuse algorithm implementation
Cns3::LteFfrEnhancedAlgorithm	Enhanced Fractional Frequency Reuse algorithm implementation
Cns3::LteFfrSimple	Simple Frequency Reuse algorithm implementation which uses only 1 sub-band
Cns3::LteFfrSoftAlgorithm	Soft Fractional Frequency Reuse algorithm implementation
Cns3::LteFrHardAlgorithm	Hard Frequency Reuse algorithm implementation which uses only 1 sub-band
Cns3::LteFrNoOpAlgorithm	FR algorithm implementation which simply does nothing
Cns3::LteFrSoftAlgorithm	Soft Frequency Reuse algorithm implementation
Cns3::LteFrStrictAlgorithm	Strict Frequency Reuse algorithm implementation
►Cns3::LteHandoverAlgorithm	The abstract base class of a handover algorithm that operates using the Handover Management SAP interface
Cns3::A2A4RsrqHandoverAlgorithm	Handover algorithm implementation based on RSRQ measurements, Event A2 and Event A4
Cns3::A3RsrpHandoverAlgorithm	Implementation of the strongest cell handover algorithm, based on RSRP measurements and Event A3
Cns3::NoOpHandoverAlgorithm	Handover algorithm implementation which simply does nothing
Cns3::LteHelper	Creation and configuration of LTE entities
Cns3::LteHexGridEnbTopologyHelper	This helper class allows to easily create a topology with eNBs grouped in three-sector sites layed out on an hexagonal grid
Cns3::LteInterference	This class implements a gaussian interference model, i.e., all incoming signals are added to the total interference
Cns3::LtePdcp	LTE PDCP entity, see 3GPP TS 36.323
►Cns3::LtePhy	The LtePhy models the physical layer of LTE
Cns3::LteEnbPhy	LteEnbPhy models the physical layer for the eNodeB
Cns3::LteTestUePhy
Cns3::LteUePhy	The LteSpectrumPhy models the physical layer of LTE
►Cns3::LteRadioBearerInfo	Store information on active radio bearer instance
Cns3::LteDataRadioBearerInfo	Store information on active data radio bearer instance
Cns3::LteSignalingRadioBearerInfo	Store information on active signaling radio bearer instance
►Cns3::LteRlc	This abstract base class defines the API to interact with the Radio Link Control (LTE_RLC) in LTE, see 3GPP TS 36.322
Cns3::LteRlcAm	LTE RLC Acknowledged Mode (AM), see 3GPP TS 36.322
Cns3::LteRlcSm	LTE_RLC Saturation Mode (SM): simulation-specific mode used for experiments that do not need to consider the layers above the LTE_RLC
Cns3::LteRlcTm	LTE RLC Transparent Mode (TM), see 3GPP TS 36.322
Cns3::LteRlcUm	LTE RLC Unacknowledged Mode (UM), see 3GPP TS 36.322
Cns3::LteSimpleHelper	Creation and configuration of LTE entities
►Cns3::LteStatsCalculator	Base class for ***StatsCalculator classes
Cns3::MacStatsCalculator	Takes care of storing the information generated at MAC layer
Cns3::PhyRxStatsCalculator	Takes care of storing the information generated at PHY layer regarding reception
Cns3::PhyStatsCalculator	Takes care of storing the information generated at PHY layer
Cns3::PhyTxStatsCalculator	Takes care of storing the information generated at PHY layer regarding transmission
Cns3::RadioBearerStatsCalculator	This class is an ns-3 trace sink that performs the calculation of PDU statistics for uplink and downlink
Cns3::LteTestMac	This class implements a testing loopback MAC layer
Cns3::LteTestPdcp	This class implements a testing PDCP entity
Cns3::LteTestRrc	This class implements a testing RRC entity
Cns3::LteUeMac
Cns3::LteUePowerControl	This class realizes Uplink Power Control functionality
Cns3::LteUeRrc
Cns3::LteUeRrcProtocolIdeal	Models the transmission of RRC messages from the UE to the eNB in an ideal fashion, without errors and without consuming any radio resources
Cns3::LteUeRrcProtocolReal	Models the transmission of RRC messages from the UE to the eNB in a real fashion, by creating real RRC PDUs and transmitting them over Signaling Radio Bearers using radio resources allocated by the LTE MAC scheduler
►Cns3::MacLow	Handle RTS/CTS/DATA/ACK transactions
Cns3::WaveMacLow	This class is the subclass of MacLow to provide support for MAC extension (1) allows higher layer control data rate and tx power level
►Cns3::MeshL2RoutingProtocol	Interface for L2 mesh routing protocol and mesh point communication
Cns3::dot11s::HwmpProtocol	Hybrid wireless mesh protocol – a routing protocol of IEEE 802.11s draft
Cns3::flame::FlameProtocol	FLAME routing protocol
►Cns3::MeshStack	Prototype for class, which helps to install MAC-layer routing stack to ns3::MeshPointDevice
Cns3::Dot11sStack	Helper class to allow easy installation of 802.11s stack
Cns3::FlameStack	Helper class used to install FLAME mesh stack (actually single protocol in this stack)
Cns3::MobilityBuildingInfo	Mobility buildings information (to be used by mobility models)
►Cns3::MobilityModel	Keep track of the current position and velocity of an object
Cns3::ConstantAccelerationMobilityModel	Mobility model for which the current acceleration does not change once it has been set and until it is set again explicitely to a new value
Cns3::ConstantPositionMobilityModel	Mobility model for which the current position does not change once it has been set and until it is set again explicitely to a new value
Cns3::ConstantVelocityMobilityModel	Mobility model for which the current speed does not change once it has been set and until it is set again explicitely to a new value
Cns3::GaussMarkovMobilityModel	Gauss-Markov mobility model
Cns3::HierarchicalMobilityModel	Hierarchical mobility model
Cns3::RandomDirection2dMobilityModel	Random direction mobility model
Cns3::RandomWalk2dMobilityModel	2D random walk mobility model
Cns3::RandomWaypointMobilityModel	Random waypoint mobility model
Cns3::SteadyStateRandomWaypointMobilityModel	Steady-state random waypoint mobility model
Cns3::WaypointMobilityModel	Waypoint-based mobility model
►Cns3::MpduAggregator	Abstract class that concrete mpdu aggregators have to implement
Cns3::MpduStandardAggregator	Standard MPDU aggregator
Cns3::MpiReceiver	Class to aggregate to a NetDevice if it supports MPI capability
►Cns3::MsduAggregator	Abstract class that concrete msdu aggregators have to implement
Cns3::MsduStandardAggregator	Standard MSDU aggregator
Cns3::NdiscCache	Introspection did not find any typical Config paths
►Cns3::NetDevice	Network layer to device interface
Cns3::AlohaNoackNetDevice	This devices implements the following features:
Cns3::BridgeNetDevice	Virtual net device that bridges multiple LAN segments
Cns3::CsmaNetDevice	A Device for a Csma Network Link
Cns3::FdNetDevice	NetDevice to read/write network traffic from/into a file descriptor
Cns3::LoopbackNetDevice	Virtual network interface that loops back any data sent to it to be immediately received on the same interface
Cns3::LrWpanNetDevice	Network layer to device interface
►Cns3::LteNetDevice	LteNetDevice provides basic implementation for all LTE network devices
Cns3::LteEnbNetDevice	The eNodeB device implementation
Cns3::LteUeNetDevice	Implements the UE net device
Cns3::MeshPointDevice	Virtual net device modeling mesh point
Cns3::NonCommunicatingNetDevice	This class implements a device which does not communicate, in the sense that it does not interact with the above protocol stack
Cns3::OpenFlowSwitchNetDevice	A net device that switches multiple LAN segments via an OpenFlow-compatible flow table
Cns3::PointToPointNetDevice	A Device for a Point to Point Network Link
►Cns3::SimpleNetDevice	This device assumes 48-bit mac addressing; there is also the possibility to add an ErrorModel if you want to force losses on the device
Cns3::LteSimpleNetDevice	Implements the LTE simple net device
Cns3::SixLowPanNetDevice	Shim performing 6LoWPAN compression, decompression and fragmentation
Cns3::TapBridge	A bridge to make it appear that a real host process is connected to an ns-3 net device
Cns3::UanNetDevice	Net device for UAN models
Cns3::VirtualNetDevice	A virtual device, similar to Linux TUN/TAP interfaces
Cns3::WaveNetDevice	This class holds together multiple, ns3::WifiPhy, and ns3::OcbWifiMac (including ns3::WifiRemoteStationManager)
Cns3::WifiNetDevice	Hold together all Wifi-related objects
►Cns3::WimaxNetDevice	Hold together all Wimax-related objects in a NetDevice
Cns3::BaseStationNetDevice
Cns3::SubscriberStationNetDevice
Cns3::Node	A network Node
Cns3::NodeListPriv	Private implementation detail of the NodeList API
Cns3::Ns3NscStack	This object represents the underlying nsc stack, which is aggregated to a Node object, and which provides access to the sysctls of the nsc stack through attributes
►Cns3::ofi::Controller	An interface for a Controller of OpenFlowSwitchNetDevices
Cns3::ofi::DropController	Demonstration of a Drop controller
Cns3::ofi::LearningController	Demonstration of a Learning controller
Cns3::PacketBurst	This class implement a burst as a list of packets
Cns3::PcapFileWrapper	A class that wraps a PcapFile as an ns3::Object and provides a higher-layer ns-3 interface to the low-level public methods of PcapFile
►Cns3::PositionAllocator	Allocate a set of positions
Cns3::FixedRoomPositionAllocator	Generate a random position uniformly distributed in the volume of a chosen room inside a chosen building
Cns3::GridPositionAllocator	Allocate positions on a rectangular 2d grid
Cns3::ListPositionAllocator	Allocate positions from a deterministic list specified by the user
Cns3::RandomBoxPositionAllocator	Allocate random positions within a 3D box according to a set of three random variables
Cns3::RandomBuildingPositionAllocator	Allocate each position by randomly chosing a building from the list of all buildings, and then randomly chosing a position inside the building
Cns3::RandomDiscPositionAllocator	Allocate random positions within a disc according to a given distribution for the polar coordinates of each node with respect to the provided center of the disc
Cns3::RandomRectanglePositionAllocator	Allocate random positions within a rectangle according to a pair of random variables
Cns3::RandomRoomPositionAllocator	Allocate each position by randomly chosing a room from the list of all buildings, and then randomly chosing a position inside the room
Cns3::SameRoomPositionAllocator	Walks a given NodeContainer sequentially, and for each node allocate a new position randomly in the same room of that node
Cns3::UniformDiscPositionAllocator	Allocate the positions uniformely (with constant density) randomly within a disc
Cns3::PriorityUlJob
►Cns3::PropagationDelayModel	Calculate a propagation delay
Cns3::ConstantSpeedPropagationDelayModel	Propagation speed is constant
Cns3::RandomPropagationDelayModel	Propagation delay is random
►Cns3::PropagationLossModel	Models the propagation loss through a transmission medium
►Cns3::BuildingsPropagationLossModel	This model provides means for simulating the following propagation phenomena in the presence of buildings:
Cns3::HybridBuildingsPropagationLossModel	The HybridBuildingsPropagationModel is a compound of different models able to evaluate the pathloss from 200 to 2600 MHz, in different environments and with buildings (i.e., indoor and outdoor communications)
Cns3::OhBuildingsPropagationLossModel	This model combines the OkumuraHata model with the BuildingsPropagationLossModel
Cns3::Cost231PropagationLossModel	The COST-Hata-Model is the most often cited of the COST 231 models
Cns3::FixedRssLossModel	Return a constant received power level independent of the transmit power
Cns3::FriisPropagationLossModel	Friis propagation loss model
Cns3::ItuR1238PropagationLossModel	This class implements the ITU-R 1238 propagation loss model
Cns3::ItuR1411LosPropagationLossModel	ITU-R 1411 LOS propagation model
Cns3::ItuR1411NlosOverRooftopPropagationLossModel	ITU-R 1411 NLOS over rooftop propagation model
Cns3::JakesPropagationLossModel	Jakes narrowband propagation model
Cns3::Kun2600MhzPropagationLossModel	Empirical propagation model for the 2.6 GHz frequency
Cns3::LogDistancePropagationLossModel	Log distance propagation model
Cns3::MatrixPropagationLossModel	The propagation loss is fixed for each pair of nodes and doesn't depend on their actual positions
Cns3::NakagamiPropagationLossModel	Nakagami-m fast fading propagation loss model
Cns3::OkumuraHataPropagationLossModel	This class implements the Okumura Hata propagation loss model
Cns3::RandomPropagationLossModel	The propagation loss follows a random distribution
Cns3::RangePropagationLossModel	The propagation loss depends only on the distance (range) between transmitter and receiver
Cns3::ThreeLogDistancePropagationLossModel	A log distance path loss propagation model with three distance fields
Cns3::TwoRayGroundPropagationLossModel	Two-Ray Ground propagation loss model ported from NS2
►Cns3::Queue	Abstract base class for packet Queues
Cns3::CoDelQueue	A CoDel packet queue
Cns3::DropTailQueue	A FIFO packet queue that drops tail-end packets on overflow
Cns3::RedQueue	A RED packet queue
Cns3::RadioEnvironmentMapHelper	Generates a 2D map of the SINR from the strongest transmitter in the downlink of an LTE FDD system
►Cns3::RandomVariableStream	The basic uniform Random Number Generator (RNG)
Cns3::ConstantRandomVariable	The Random Number Generator (RNG) that returns a constant
Cns3::DeterministicRandomVariable	The Random Number Generator (RNG) that returns a predetermined sequence
Cns3::EmpiricalRandomVariable	The Random Number Generator (RNG) that has a specified empirical distribution
Cns3::ErlangRandomVariable	The Erlang distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically
Cns3::ExponentialRandomVariable	The exponential distribution Random Number Generator (RNG)
Cns3::GammaRandomVariable	The gamma distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically
Cns3::LogNormalRandomVariable	The log-normal distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically
Cns3::NormalRandomVariable	The normal (Gaussian) distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically
Cns3::ParetoRandomVariable	The Pareto distribution Random Number Generator (RNG)
Cns3::SequentialRandomVariable	The Random Number Generator (RNG) that returns a pattern of sequential values
Cns3::TriangularRandomVariable	The triangular distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically
Cns3::UniformRandomVariable	The uniform distribution Random Number Generator (RNG)
Cns3::WeibullRandomVariable	The Weibull distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically
Cns3::ZetaRandomVariable	The zeta distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically
Cns3::ZipfRandomVariable	The Zipf distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically
Cns3::RemoteChannelBundle	Collection of NS3 channels between local and remote nodes
►Cns3::RttEstimator	Base class for all RTT Estimators
Cns3::RttMeanDeviation	The "Mean--Deviation" RTT estimator, as discussed by Van Jacobson
►Cns3::Scheduler	Maintain the event list
Cns3::CalendarScheduler	Calendar queue event scheduler
Cns3::HeapScheduler	Binary heap event scheduler
Cns3::ListScheduler	Std::list event scheduler
Cns3::MapScheduler	Std::map event scheduler
►Cns3::ServiceFlowManager	The same service flow manager class serves both for BS and SS though some functions are exclusive to only one of them
Cns3::BsServiceFlowManager
Cns3::SsServiceFlowManager
►Cns3::SimulatorImpl	The SimulatorImpl base class
Cns3::DefaultSimulatorImpl	The default single process simulator implementation
Cns3::DistributedSimulatorImpl	Distributed simulator implementation using lookahead
Cns3::NullMessageSimulatorImpl	Simulator implementation using MPI and a Null Message algorithm
Cns3::RealtimeSimulatorImpl	Realtime version of SimulatorImpl
Cns3::VisualSimulatorImpl	A replacement simulator that starts the visualizer
►Cns3::Socket	A low-level Socket API based loosely on the BSD Socket API
Cns3::Ipv4RawSocketImpl	Introspection did not find any typical Config paths
Cns3::Ipv6RawSocketImpl	Introspection did not find any typical Config paths
Cns3::PacketSocket	A PacketSocket is a link between an application and a net device
►Cns3::TcpSocket	(abstract) base class of all TcpSockets
Cns3::NscTcpSocketImpl	Socket logic for the NSC TCP sockets
►Cns3::TcpSocketBase	A base class for implementation of a stream socket using TCP
Cns3::TcpNewReno	An implementation of a stream socket using TCP
Cns3::TcpReno	An implementation of a stream socket using TCP
Cns3::TcpRfc793	An implementation of a stream socket using TCP
Cns3::TcpTahoe	An implementation of a stream socket using TCP
Cns3::TcpWestwood	An implementation of a stream socket using TCP
►Cns3::UdpSocket	(abstract) base class of all UdpSockets
Cns3::UdpSocketImpl	A sockets interface to UDP
►Cns3::SocketFactory	Object to create transport layer instances that provide a socket API to applications
►Cns3::Ipv4RawSocketFactory	API to create RAW socket instances
Cns3::Ipv4RawSocketFactoryImpl	Implementation of IPv4 raw socket factory
►Cns3::Ipv6RawSocketFactory	API to create IPv6 RAW socket instances
Cns3::Ipv6RawSocketFactoryImpl	Implementation of IPv6 raw socket factory
Cns3::PacketSocketFactory	This can be used as an interface in a node in order for the node to generate PacketSockets that can connect to net devices
►Cns3::TcpSocketFactory	API to create TCP socket instances
Cns3::NscTcpSocketFactoryImpl	Socket factory implementation for creating instances of NSC TCP
Cns3::TcpSocketFactoryImpl	Socket factory implementation for native ns-3 TCP
►Cns3::UdpSocketFactory	API to create UDP socket instances
Cns3::UdpSocketFactoryImpl	Object to create UDP socket instances
►Cns3::SpectrumErrorModel	Introspection did not find any typical Config paths
Cns3::ShannonSpectrumErrorModel	This class implements the error model described in this paper: N
Cns3::SpectrumInterference	This class implements a gaussian interference model, i.e., all incoming signals are added to the total interference
►Cns3::SpectrumPhy	Abstract base class for Spectrum-aware PHY layers
Cns3::HalfDuplexIdealPhy	This PHY layer implementation realizes an ideal OFDM PHY which transmits half-duplex (i.e., it can either receive or transmit at a given time)
Cns3::LrWpanPhy	Make LrWpanPhy a SpectrumPhy so we can enable the eventual modeling of device interference
Cns3::LteSimpleSpectrumPhy	The LteSimpleSpectrumPhy models the physical layer of LTE This class is used to test Frequency Reuse Algorithms, it allow to get SpectrumValue from channel and pass it to test script by trace mechanism
Cns3::LteSpectrumPhy	The LteSpectrumPhy models the physical layer of LTE
Cns3::RemSpectrumPhy	This minimal SpectrumPhy implemetation calculates the SINR with respect to the strongest signal for a given point
Cns3::SpectrumAnalyzer	Simple SpectrumPhy implemetation that averages the spectrum power density of incoming transmissions to produce a spectrogram
Cns3::TvSpectrumTransmitter	SpectrumPhy implementation that creates a customizable TV transmitter which transmits a PSD spectrum specified by user-set attributes
Cns3::WaveformGenerator	Simple SpectrumPhy implementation that sends customizable waveform
►Cns3::SpectrumPropagationLossModel	Spectrum-aware propagation loss model
Cns3::ConstantSpectrumPropagationLossModel	Introspection did not find any typical Config paths
Cns3::FriisSpectrumPropagationLossModel	Introspection did not find any typical Config paths
Cns3::TraceFadingLossModel	Fading loss model based on precalculated fading traces
Cns3::SSLinkManager	This class implements the link manager of subscriber station net device
Cns3::SSManager	This class manages a list of SSrecord
Cns3::SSScheduler
►Cns3::Synchronizer	Base class used for synchronizing the simulation events to some real time "wall clock."
Cns3::WallClockSynchronizer	Class used for synchronizing the simulation events to a real-time "wall clock" using Posix clock functions
►Cns3::TcpOption	Base class for all kinds of TCP options
Cns3::TcpOptionEnd	Defines the TCP option of kind 0 (end of option list) as in RFC 793
Cns3::TcpOptionMSS	Defines the TCP option of kind 2 (maximum segment size) as in RFC 793
Cns3::TcpOptionNOP	Defines the TCP option of kind 1 (no operation) as in RFC 793
Cns3::TcpOptionTS	Defines the TCP option of kind 8 (timestamp option) as in RFC 1323
Cns3::TcpOptionUnknown	An unknown TCP option
Cns3::TcpOptionWinScale	Defines the TCP option of kind 3 (window scale option) as in RFC 1323
Cns3::TcpRxBuffer	Class for the reordering buffer that keeps the data from lower layer, i.e
Cns3::TcpTxBuffer	Class for keeping the data sent by the application to the TCP socket, i.e
►Cns3::TopologyReader	Interface for input file readers management
Cns3::InetTopologyReader	Topology file reader (Inet-format type)
Cns3::OrbisTopologyReader	Topology file reader (Orbis-format type)
Cns3::RocketfuelTopologyReader	Topology file reader (Rocketfuel-format type)
►Cns3::UanMac	Virtual base class for all UAN MAC protocols
Cns3::UanMacAloha	ALOHA MAC Protocol, the simplest MAC protocol for wireless networks
Cns3::UanMacCw	CW-MAC protocol, similar in idea to the 802.11 DCF with constant backoff window
Cns3::UanMacRc	Non-gateway node MAC for reservation channel MAC protocol
Cns3::UanMacRcGw	Gateway side of RC-MAC
►Cns3::UanNoiseModel	UAN Noise Model base class
Cns3::UanNoiseModelDefault	Standard ambient acoustic noise model
►Cns3::UanPhy	Base class for UAN Phy models
Cns3::UanPhyDual	Two channel Phy
Cns3::UanPhyGen	Generic PHY model
►Cns3::UanPhyCalcSinr	Class used for calculating SINR of packet in UanPhy
Cns3::UanPhyCalcSinrDefault	Default SINR calculator for UanPhyGen
Cns3::UanPhyCalcSinrDual	Default SINR model for UanPhyDual
Cns3::UanPhyCalcSinrFhFsk	WHOI Micromodem like FH-FSK model
►Cns3::UanPhyPer	Calculate packet error probability, based on received SINR and modulation (mode)
Cns3::UanPhyPerGenDefault	Default Packet Error Rate calculator for UanPhyGen
Cns3::UanPhyPerUmodem	Packet error rate calculation assuming WHOI Micromodem-like PHY
►Cns3::UanPropModel	Base class for implemented underwater propagation models
Cns3::UanPropModelIdeal	Ideal propagation model (no pathloss, impulse PDP)
Cns3::UanPropModelThorp	Uses Thorp's approximation to compute pathloss
►Cns3::UanTransducer	Virtual base for Transducer objects
Cns3::UanTransducerHd	Half duplex implementation of transducer object
Cns3::UeManager	Manages all the radio bearer information possessed by the ENB RRC for a single UE
Cns3::UlJob	This class implements a structure to compute the priority of service flows
►Cns3::UplinkScheduler	Virtual class for uplink scheduler
Cns3::UplinkSchedulerMBQoS	This class implements a Migration-based Quality of Service uplink scheduler(MBQoS)
Cns3::UplinkSchedulerRtps	This class implements a simple uplink scheduler for rtPS flows
Cns3::UplinkSchedulerSimple
Cns3::VsaManager	Refer to 1609.4-2010 chapter 6.4 Vendor Specific Action (VSA) frames transmission
Cns3::WaveBsmStats	Implements a stats collector for IEEE 1609 WAVE (Wireless Access in Vehicular Environments) Basic Safety Messages (BSMs)
►Cns3::WifiMac	Base class for all MAC-level wifi objects
►Cns3::RegularWifiMac	Base class for all MAC-level wifi objects
Cns3::AdhocWifiMac
Cns3::ApWifiMac	Wi-Fi AP state machineHandle association, dis-association and authentication, of STAs within an infrastructure BSS
Cns3::MeshWifiInterfaceMac	Basic MAC of mesh point Wi-Fi interface
Cns3::OcbWifiMac	STAs communicate with each directly outside the context of a BSSIn OCB mac mode,synchronization, association, dis-association and authentication of normal wifi are not used for wireless access in vehicular environments
Cns3::StaWifiMac	The Wifi MAC high model for a non-AP STA in a BSS
Cns3::WifiMacQueue	This queue implements the timeout procedure described in (Section 9.19.2.6 "Retransmit procedures" paragraph 6; IEEE 802.11-2012)
►Cns3::WifiPhy	802.11 PHY layer model
Cns3::YansWifiPhy	802.11 PHY layer modelThis PHY implements a model of 802.11a
Cns3::WifiPhyStateHelper	This objects implements the PHY state machine of the Wifi device
►Cns3::WifiRemoteStationManager	Hold a list of per-remote-station state
Cns3::AarfcdWifiManager	Implementation of the AARF-CD algorithmThis algorithm was first described in "Efficient Collision Detection for Auto Rate Fallback Algorithm"
Cns3::AarfWifiManager	AARF Rate control algorithmThis class implements the AARF rate control algorithm which was initially described in IEEE 802.11 Rate Adaptation: A Practical Approach, by M
Cns3::AmrrWifiManager	AMRR Rate control algorithmThis class implements the AMRR rate control algorithm which was initially described in IEEE 802.11 Rate Adaptation: A Practical Approach, by M
Cns3::AparfWifiManager	APARF Power and rate control algorithm
Cns3::ArfWifiManager	ARF Rate control algorithm
Cns3::CaraWifiManager	Implement the CARA rate control algorithmImplement the CARA algorithm from: J
Cns3::ConstantRateWifiManager	Use constant rates for data and RTS transmissions
Cns3::IdealWifiManager	Ideal rate control algorithmThis class implements an 'ideal' rate control algorithm similar to RBAR in spirit (see A rate-adaptive MAC protocol for multihop wireless networks by G
Cns3::MinstrelWifiManager	Implementation of Minstrel Rate Control AlgorithmPorting Minstrel from Madwifi and Linux Kernel http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/minstrel
Cns3::OnoeWifiManager	Implementation of the rate control algorithm developed by Atsushi Onoe
Cns3::ParfWifiManager	PARF Rate control algorithm
Cns3::RraaWifiManager	Robust Rate Adaptation AlgorithmThis is an implementation of RRAA as described in "Robust rate adaptation for 802.11 wireless networks" by "Starsky H. Y. Wong", "Hao Yang", "Songwu Lu", and, "Vaduvur Bharghavan" published in Mobicom 06
►Cns3::WifiTxCurrentModel	Modelize the transmit current as a function of the transmit power and mode
Cns3::LinearWifiTxCurrentModel	Linear model of the Wifi transmit current
Cns3::WimaxConnection
Cns3::WimaxMacQueue
►Cns3::WimaxPhy
Cns3::SimpleOfdmWimaxPhy
CPtrExample	Example class illustrating use of Ptr
CRoutingHelper	Generates routing data between nodes (vehicles) and uses the RoutingStats class to collect statistics on routing data (application-data packet and byte counts)
CSampleEmitter
CSequenceNumberTestObj
CTestObject
►CTracedCallbackTypedefTestCase::CheckerBase< T1, T2, T3, T4, T5 >	Invoker boilerplate
CTracedCallbackTypedefTestCase::Checker< T1, T2, T3, T4, T5 >	Callback checkers
CTracedValueCallbackTestCase::CheckTvCb< T >	A class to check that the callback function typedef will actually connect to the TracedValue
CWifiPhyStats	Collects Wifi MAC/PHY statistics
Cns3::ObjectDeleter	Standard Object deleter, used by SimpleRefCount to delete an Object when the reference count drops to zero
Cns3::ObjectFactory	Instantiate subclasses of ns3::Object
Cns3::ObjectMapChecker	AttributeChecker implementation for ObjectMapValue
Cns3::Ns2MobilityHelper::ObjectStore	Class to hold input objects internally
Cns3::ObjectVectorChecker	AttributeChecker implementation for ObjectVectorValue
Cns3::OfdmDlBurstProfile
Cns3::OfdmDlMapIe
Cns3::OfdmUlBurstProfile
Cns3::OfdmUlMapIe
Cns3::olsr::OlsrState	This class encapsulates all data structures needed for maintaining internal state of an OLSR node
Cns3::OnOffHelper	A helper to make it easier to instantiate an ns3::OnOffApplication on a set of nodes
Cns3::OpenFlowSwitchHelper	Add capability to switch multiple LAN segments (IEEE 802.1D bridging)
COptionField	Option field for an DsrFsHeader Enables adding options to an DsrFsHeader
►Cns3::OptionField	Option field for an IPv6ExtensionHeader Enables adding options to an IPv6ExtensionHeader
Cns3::Ipv6ExtensionDestinationHeader	Introspection did not find any typical Config paths
Cns3::Ipv6ExtensionHopByHopHeader	Introspection did not find any typical Config paths
Cns3::OrganizationIdentifier	Organization identifier is a public organizationally unique identifier assigned by the IEEE
Cns3::OriginatorRxStatus	A class to keep track of the packet originator status
Cns3::JakesProcess::Oscillator	This class Represents a single oscillator
CPsrExperiment::Output
CCollisionExperiment::Output
Cns3::AnimationInterface::P2pLinkNodeIdPair
Cns3::PyViz::PacketCaptureOptions
Cns3::PyViz::PacketDropSample
CPacketEntry
Cns3::EpcTft::PacketFilter	Implement the data structure representing a TrafficFlowTemplate Packet Filter
Cns3::PacketLossCounter	A class to count the number of lost packets
Cns3::PacketMetadata	Handle packet metadata about packet headers and trailers
Cns3::dsdv::PacketQueue	DSDV Packet queue
►Cns3::PyViz::PacketSample
Cns3::PyViz::RxPacketSample
Cns3::PyViz::TxPacketSample
Cns3::PacketSinkHelper	A helper to make it easier to instantiate an ns3::PacketSinkApplication on a set of nodes
Cns3::PacketSocketAddress	Address for a packet socket
Cns3::PacketSocketHelper	Give ns3::PacketSocket powers to ns3::Node
Cns3::PacketTagIterator	Iterator over the set of packet tags in a packet
Cns3::PacketTagList	List of the packet tags stored in a packet
Cns3::PagingInfoListElement_s	See section 4.3.30 pagingInfoListElement
►Cns3::ParallelCommunicationInterface	Pure virtual base class for the interface between ns-3 and the parallel communication layer being used
Cns3::GrantedTimeWindowMpiInterface	Interface between ns-3 and MPI
Cns3::NullMessageMpiInterface	Interface between ns-3 and MPI for the Null Message distributed simulation implementation
Cns3::ParameterLogger	Insert , when streaming function arguments
Cns3::Parameters
Cns3::ParseResult	Type to maintain line parsed and its values
Cns3::dsr::PassiveBuffEntry	DSR Passive Buffer Entry
Cns3::dsr::PassiveKey
Ccheck-style.Patch
Ccheck-style.PatchChunk
Ccheck-style.PatchChunkLine
Cns3::dot11s::HwmpProtocol::PathError	Structure of path error: IePerr and list of receivers: interfaces and MAC address
Cns3::EpcEnbS1SapUser::PathSwitchRequestAcknowledgeParameters
Cns3::EpcEnbS1SapProvider::PathSwitchRequestParameters
Cns3::PbbAddressTlvBlock	A block of Address TLVs (PbbAddressTlv)
Cns3::PbbTlvBlock	A block of packet or message TLVs (PbbTlv)
Cns3::PcapFile	A class representing a pcap file
Cns3::PcapFile::PcapFileHeader	Pcap file header
Cns3::PcapHelper	Manage pcap files for device models
►Cns3::PcapHelperForDevice	Base class providing common user-level pcap operations for helpers representing net devices
Cns3::CsmaHelper	Build a set of CsmaNetDevice objects
Cns3::FdNetDeviceHelper	Build a set of FdNetDevice objects Normally we eschew multiple inheritance, however, the classes PcapUserHelperForDevice and AsciiTraceUserHelperForDevice are treated as "mixins"
Cns3::LrWpanHelper	Helps to manage and create IEEE 802.15.4 NetDevice objects
Cns3::PointToPointHelper	Build a set of PointToPointNetDevice objects
Cns3::WimaxHelper	Helps to manage and create WimaxNetDevice objects
Cns3::YansWifiPhyHelper	Make it easy to create and manage PHY objects for the yans model
►Cns3::PcapHelperForIpv4	Base class providing common user-level pcap operations for helpers representing IPv4 protocols
Cns3::InternetStackHelper	Aggregate IP/TCP/UDP functionality to existing Nodes
►Cns3::PcapHelperForIpv6	Base class providing common user-level pcap operations for helpers representing IPv6 protocols
Cns3::InternetStackHelper	Aggregate IP/TCP/UDP functionality to existing Nodes
Cns3::PcapFile::PcapRecordHeader	Pcap record header
Cns3::LteRrcSap::PdschConfigCommon
Cns3::LteRrcSap::PdschConfigDedicated
Cns3::LteRlcAm::PduBuffer
Cns3::PendingData	Class for managing I/O between applications and TCP
Cns3::LteUeRrc::PendingTrigger_t	Represents a single triggered event from a measurement identity which reporting criteria have been fulfilled, but delayed by time-to-trigger
Cns3::pfsFlowPerf_t
Cns3::PhichListElement_s	See section 4.3.7 phichListElement
Cns3::PhyReceptionStatParameters
Cns3::LteRrcSap::PhysCellIdRange
Cns3::LteRrcSap::PhysicalConfigDedicated
Cns3::PhyTransmissionStatParameters
Cns3::anonymous_namespace{wifi-information-element-vector.cc}::PIEComparator
Cns3::Ping6Helper	Ping6 application helper
Cns3::dot11s::PeerLinkCloseStart::PlinkCloseStartFields	Fields:
Cns3::dot11s::PeerLinkConfirmStart::PlinkConfirmStartFields	Fields:
Cns3::dot11s::PeerManagementProtocolMac::PlinkFrameStart	This structure keeps all fields in peer link management frame, which are not subclasses of WifiInformationElement
Cns3::dot11s::PeerLinkOpenStart::PlinkOpenStartFields	Fields:
Cns3::LteRrcSap::PlmnIdentityInfo
Cns3::Gnuplot2dDataset::Point	A point in a 2D plot
Cns3::Gnuplot3dDataset::Point	A point in a 3D plot
CTypeTraits< T >::PointerTraits< U >	Not a pointer type
CTypeTraits< T >::PointerTraits< ns3::Ptr< U > >	Ptr type
CTypeTraits< T >::PointerTraits< U * >	Pointer type
Cns3::PointToPointDumbbellHelper	A helper to make it easier to create a dumbbell topology with p2p links
Cns3::PointToPointGridHelper	A helper to make it easier to create a grid topology with p2p links
Cns3::PointToPointStarHelper	A helper to make it easier to create a star topology with PointToPoint links
Cns3::ofi::Port	Port and its metadata
Cns3::IpcsClassifierRecord::PortRange
Cns3::PortRangeTlvValue::PortRange
Cns3::ofi::Stats::PortStatsState	State of the PortStats request/reply
CPositionInBuilding
Cns3::LteRrcSap::PreambleInfo
Canonymous_namespace{rng-stream.cc}::Precalculated	The transition matrices of the two MRG components (in matrix form), raised to all powers of 2 from 1 to 191
Cns3::dot11s::HwmpRtable::Precursor	Route found in reactive mode
Cns3::dot11s::HwmpProtocol::PreqEvent
Cns3::int64x64::test::Printer	Pretty printer for test cases
Cns3::PrintList	Handler for print-list token in NS_LOG to print the list of log components
Cns3::dot11s::HwmpRtable::ProactiveRoute	Route fond in proactive mode
Cns3::PropagationCache< T >	Constructs a cache of objects, where each object is responsible for a single propagation path loss calculations
Cns3::PropagationCache< ns3::JakesProcess >
Cns3::PropagationCache< T >::PropagationPathIdentifier	Each path is identified by
Cns3::Node::ProtocolHandlerEntry	Protocol handler entry
CPsrExperiment
Cns3::LteUePhy::PssElement
Cns3::pssFlowPerf_t	Flow information
Cns3::Ptr< T >	Smart pointer class similar to boost::intrusive_ptr
Cns3::Ptr< Application >
Cns3::Ptr< ArpCache >
Cns3::Ptr< BasicEnergySource >
Cns3::Ptr< BuildingsMobilityModel >
Cns3::Ptr< ChannelCoordinationListener >
Cns3::Ptr< ChannelCoordinator >
Cns3::Ptr< ConfigTestObject >
Cns3::Ptr< const ns3::AttributeAccessor >
Cns3::Ptr< const ns3::AttributeChecker >
Cns3::Ptr< const ns3::AttributeValue >
Cns3::Ptr< const ns3::JakesPropagationLossModel >
Cns3::Ptr< const ns3::MobilityModel >
Cns3::Ptr< const ns3::NetDevice >
Cns3::Ptr< const ns3::Object >
Cns3::Ptr< const ns3::Packet >
Cns3::Ptr< const ns3::SpectrumModel >
Cns3::Ptr< const ns3::SpectrumValue >
Cns3::Ptr< const ns3::TraceSourceAccessor >
Cns3::Ptr< const Packet >
Cns3::Ptr< const SpectrumModel >
Cns3::Ptr< ConstantRandomVariable >
Cns3::Ptr< CounterCalculator<> >
Cns3::Ptr< DataCalculator >
Cns3::Ptr< Derived >
Cns3::Ptr< dsr::ns3::dsr::DsrNetworkQueue >
Cns3::Ptr< dsr::ns3::dsr::PassiveBuffer >
Cns3::Ptr< dsr::ns3::dsr::RouteCache >
Cns3::Ptr< dsr::ns3::dsr::RreqTable >
Cns3::Ptr< DsrOptions >
Cns3::Ptr< EdcaTxopN >
Cns3::Ptr< EpcTftClassifier >
Cns3::Ptr< ExponentialRandomVariable >
Cns3::Ptr< FlameProtocolMac >
Cns3::Ptr< FlameRtable >
Cns3::Ptr< FlowProbe >
Cns3::Ptr< Fragments >
Cns3::Ptr< Hash::Implementation >
Cns3::Ptr< HwmpProtocolMac >
Cns3::Ptr< HwmpRtable >
Cns3::Ptr< IeBeaconTimingUnit >
Cns3::Ptr< IpL4Protocol >
Cns3::Ptr< Ipv4Interface >
Cns3::Ptr< Ipv4RawSocketImpl >
Cns3::Ptr< Ipv4Route >
Cns3::Ptr< Ipv6AutoconfiguredPrefix >
Cns3::Ptr< Ipv6Extension >
Cns3::Ptr< Ipv6ExtensionRouting >
Cns3::Ptr< Ipv6Interface >
Cns3::Ptr< Ipv6Option >
Cns3::Ptr< Ipv6RawSocketImpl >
Cns3::Ptr< LteEnbNetDevice >
Cns3::Ptr< LteFfrSimple >
Cns3::Ptr< LteHelper >
Cns3::Ptr< LteRlc >
Cns3::Ptr< LteTestMac >
Cns3::Ptr< LteTestPdcp >
Cns3::Ptr< LteUePowerControl >
Cns3::Ptr< MacLow >
Cns3::Ptr< MeshWifiInterfaceMacPlugin >
Cns3::Ptr< MinMaxAvgTotalCalculator< uint32_t > >
Cns3::Ptr< MinMaxAvgTotalCalculator< uint64_t > >
Cns3::Ptr< MobilityModel >
Cns3::Ptr< MpduAggregator >
Cns3::Ptr< MsduAggregator >
Cns3::Ptr< NdiscCache >
Cns3::Ptr< NixVector >
Cns3::Ptr< Node >
Cns3::Ptr< ns3::AntennaModel >
Cns3::Ptr< ns3::Application >
Cns3::Ptr< ns3::ArpCache >
Cns3::Ptr< ns3::AttributeValue >
Cns3::Ptr< ns3::BandwidthManager >
Cns3::Ptr< ns3::BaseStationNetDevice >
Cns3::Ptr< ns3::BridgeChannel >
Cns3::Ptr< ns3::BSLinkManager >
Cns3::Ptr< ns3::BSScheduler >
Cns3::Ptr< ns3::BsServiceFlowManager >
Cns3::Ptr< ns3::Building >
Cns3::Ptr< ns3::BurstProfileManager >
Cns3::Ptr< ns3::CallbackImplBase >
Cns3::Ptr< ns3::Channel >
Cns3::Ptr< ns3::ChannelCoordinationListener >
Cns3::Ptr< ns3::ChannelCoordinator >
Cns3::Ptr< ns3::ChannelManager >
Cns3::Ptr< ns3::ChannelScheduler >
Cns3::Ptr< ns3::ConnectionManager >
Cns3::Ptr< ns3::CsmaChannel >
Cns3::Ptr< ns3::CsmaNetDevice >
Cns3::Ptr< ns3::DcaTxop >
Cns3::Ptr< ns3::DeviceEnergyModel >
Cns3::Ptr< ns3::dot11s::DestinationAddressUnit >
Cns3::Ptr< ns3::dot11s::HwmpProtocol >
Cns3::Ptr< ns3::dot11s::HwmpRtable >
Cns3::Ptr< ns3::dot11s::IeMeshId >
Cns3::Ptr< ns3::dot11s::PeerManagementProtocol >
Cns3::Ptr< ns3::dot11s::PeerManagementProtocolMac >
Cns3::Ptr< ns3::EnergyHarvester >
Cns3::Ptr< ns3::EnergySource >
Cns3::Ptr< ns3::EpcHelper >
Cns3::Ptr< ns3::EpcMme >
Cns3::Ptr< ns3::EpcMme::EnbInfo >
Cns3::Ptr< ns3::EpcMme::UeInfo >
Cns3::Ptr< ns3::EpcSgwPgwApplication >
Cns3::Ptr< ns3::EpcSgwPgwApplication::UeInfo >
Cns3::Ptr< ns3::EpcTft >
Cns3::Ptr< ns3::EpcUeNas >
Cns3::Ptr< ns3::ErlangRandomVariable >
Cns3::Ptr< ns3::ErrorModel >
Cns3::Ptr< ns3::ErrorRateModel >
Cns3::Ptr< ns3::EventImpl >
Cns3::Ptr< ns3::ExponentialRandomVariable >
Cns3::Ptr< ns3::FdNetDeviceFdReader >
Cns3::Ptr< ns3::FfMacScheduler >
Cns3::Ptr< ns3::FileAggregator >
Cns3::Ptr< ns3::flame::FlameProtocol >
Cns3::Ptr< ns3::flame::FlameRtable >
Cns3::Ptr< ns3::FlowClassifier >
Cns3::Ptr< ns3::FlowMonitor >
Cns3::Ptr< ns3::GammaRandomVariable >
Cns3::Ptr< ns3::GnuplotAggregator >
Cns3::Ptr< ns3::GridPositionAllocator >
Cns3::Ptr< ns3::IpcsClassifier >
Cns3::Ptr< ns3::Ipv4 >
Cns3::Ptr< ns3::Ipv4FlowClassifier >
Cns3::Ptr< ns3::Ipv4GlobalRouting >
Cns3::Ptr< ns3::Ipv4Interface >
Cns3::Ptr< ns3::Ipv4L3Protocol >
Cns3::Ptr< ns3::Ipv4RawSocketImpl >
Cns3::Ptr< ns3::Ipv4Route >
Cns3::Ptr< ns3::Ipv4RoutingProtocol >
Cns3::Ptr< ns3::Ipv4StaticRouting >
Cns3::Ptr< ns3::Ipv6 >
Cns3::Ptr< ns3::Ipv6FlowClassifier >
Cns3::Ptr< ns3::Ipv6Interface >
Cns3::Ptr< ns3::Ipv6PmtuCache >
Cns3::Ptr< ns3::Ipv6RoutingProtocol >
Cns3::Ptr< ns3::ItuR1238PropagationLossModel >
Cns3::Ptr< ns3::ItuR1411LosPropagationLossModel >
Cns3::Ptr< ns3::ItuR1411NlosOverRooftopPropagationLossModel >
Cns3::Ptr< ns3::JakesProcess >
Cns3::Ptr< ns3::Kun2600MhzPropagationLossModel >
Cns3::Ptr< ns3::LrWpanCsmaCa >
Cns3::Ptr< ns3::LrWpanErrorModel >
Cns3::Ptr< ns3::LrWpanInterferenceHelper >
Cns3::Ptr< ns3::LrWpanMac >
Cns3::Ptr< ns3::LrWpanPhy >
Cns3::Ptr< ns3::LteAmc >
Cns3::Ptr< ns3::LteAnr >
Cns3::Ptr< ns3::LteChunkProcessor >
Cns3::Ptr< ns3::LteControlMessage >
Cns3::Ptr< ns3::LteDataRadioBearerInfo >
Cns3::Ptr< ns3::LteEnbMac >
Cns3::Ptr< ns3::LteEnbNetDevice >
Cns3::Ptr< ns3::LteEnbPhy >
Cns3::Ptr< ns3::LteEnbRrc >
Cns3::Ptr< ns3::LteFfrAlgorithm >
Cns3::Ptr< ns3::LteHandoverAlgorithm >
Cns3::Ptr< ns3::LteHarqPhy >
Cns3::Ptr< ns3::LteHelper >
Cns3::Ptr< ns3::LteInterference >
Cns3::Ptr< ns3::LteNetDevice >
Cns3::Ptr< ns3::LtePdcp >
Cns3::Ptr< ns3::LteRlc >
Cns3::Ptr< ns3::LteSignalingRadioBearerInfo >
Cns3::Ptr< ns3::LteSpectrumPhy >
Cns3::Ptr< ns3::LteTestMac >
Cns3::Ptr< ns3::LteTestRrc >
Cns3::Ptr< ns3::LteUeMac >
Cns3::Ptr< ns3::LteUePhy >
Cns3::Ptr< ns3::LteUePowerControl >
Cns3::Ptr< ns3::LteUeRrc >
Cns3::Ptr< ns3::MacLow >
Cns3::Ptr< ns3::MacStatsCalculator >
Cns3::Ptr< ns3::MeshL2RoutingProtocol >
Cns3::Ptr< ns3::MeshPointDevice >
Cns3::Ptr< ns3::MeshStack >
Cns3::Ptr< ns3::MeshWifiInterfaceMac >
Cns3::Ptr< ns3::MobilityModel >
Cns3::Ptr< ns3::MpduAggregator >
Cns3::Ptr< ns3::MsduAggregator >
Cns3::Ptr< ns3::NdiscCache >
Cns3::Ptr< ns3::NetDevice >
Cns3::Ptr< ns3::NixVector >
Cns3::Ptr< ns3::Node >
Cns3::Ptr< ns3::NormalRandomVariable >
Cns3::Ptr< ns3::NscTcpL4Protocol >
Cns3::Ptr< ns3::NscTcpSocketImpl >
Cns3::Ptr< ns3::Object >
Cns3::Ptr< ns3::OkumuraHataPropagationLossModel >
Cns3::Ptr< ns3::OpenFlowSwitchNetDevice >
Cns3::Ptr< ns3::Packet >
Cns3::Ptr< ns3::PacketBurst >
Cns3::Ptr< ns3::PbbAddressBlock >
Cns3::Ptr< ns3::PbbAddressTlv >
Cns3::Ptr< ns3::PbbMessage >
Cns3::Ptr< ns3::PbbTlv >
Cns3::Ptr< ns3::PhyRxStatsCalculator >
Cns3::Ptr< ns3::PhyStatsCalculator >
Cns3::Ptr< ns3::PhyTxStatsCalculator >
Cns3::Ptr< ns3::PointToPointChannel >
Cns3::Ptr< ns3::PointToPointNetDevice >
Cns3::Ptr< ns3::PositionAllocator >
Cns3::Ptr< ns3::PropagationDelayModel >
Cns3::Ptr< ns3::PropagationLossModel >
Cns3::Ptr< ns3::Queue >
Cns3::Ptr< ns3::RadioBearerStatsCalculator >
Cns3::Ptr< ns3::RandomBoxPositionAllocator >
Cns3::Ptr< ns3::RandomVariableStream >
Cns3::Ptr< ns3::RemSpectrumPhy >
Cns3::Ptr< ns3::RttEstimator >
Cns3::Ptr< ns3::Scheduler >
Cns3::Ptr< ns3::SimpleChannel >
Cns3::Ptr< ns3::SimpleNetDevice >
Cns3::Ptr< ns3::SimpleOfdmWimaxPhy >
Cns3::Ptr< ns3::SimulatorImpl >
Cns3::Ptr< ns3::Socket >
Cns3::Ptr< ns3::SpectrumChannel >
Cns3::Ptr< ns3::SpectrumErrorModel >
Cns3::Ptr< ns3::SpectrumModel >
Cns3::Ptr< ns3::SpectrumPhy >
Cns3::Ptr< ns3::SpectrumPropagationLossModel >
Cns3::Ptr< ns3::SpectrumValue >
Cns3::Ptr< ns3::SqliteDataOutput >
Cns3::Ptr< ns3::SSLinkManager >
Cns3::Ptr< ns3::SSManager >
Cns3::Ptr< ns3::SSScheduler >
Cns3::Ptr< ns3::SsServiceFlowManager >
Cns3::Ptr< ns3::SubscriberStationNetDevice >
Cns3::Ptr< ns3::Synchronizer >
Cns3::Ptr< ns3::SystemThread >
Cns3::Ptr< ns3::TapBridgeFdReader >
Cns3::Ptr< ns3::TcpL4Protocol >
Cns3::Ptr< ns3::TcpRxBuffer >
Cns3::Ptr< ns3::TcpSocketBase >
Cns3::Ptr< ns3::TcpTxBuffer >
Cns3::Ptr< ns3::TimeSeriesAdaptor >
Cns3::Ptr< ns3::TopologyReader >
Cns3::Ptr< ns3::UanChannel >
Cns3::Ptr< ns3::UanMac >
Cns3::Ptr< ns3::UanNetDevice >
Cns3::Ptr< ns3::UanNoiseModel >
Cns3::Ptr< ns3::UanPhy >
Cns3::Ptr< ns3::UanPhyCalcSinr >
Cns3::Ptr< ns3::UanPhyPer >
Cns3::Ptr< ns3::UanPropModel >
Cns3::Ptr< ns3::UanTransducer >
Cns3::Ptr< ns3::UdpL4Protocol >
Cns3::Ptr< ns3::UdpServer >
Cns3::Ptr< ns3::UdpSocketImpl >
Cns3::Ptr< ns3::UeManager >
Cns3::Ptr< ns3::UlJob >
Cns3::Ptr< ns3::UniformRandomVariable >
Cns3::Ptr< ns3::UplinkScheduler >
Cns3::Ptr< ns3::VendorSpecificValue >
Cns3::Ptr< ns3::VirtualNetDevice >
Cns3::Ptr< ns3::VsaManager >
Cns3::Ptr< ns3::WaveBsmStats >
Cns3::Ptr< ns3::WaveNetDevice >
Cns3::Ptr< ns3::WifiMac >
Cns3::Ptr< ns3::WifiMacQueue >
Cns3::Ptr< ns3::WifiPhy >
Cns3::Ptr< ns3::WifiPhyStateHelper >
Cns3::Ptr< ns3::WifiRemoteStationManager >
Cns3::Ptr< ns3::WifiTxCurrentModel >
Cns3::Ptr< ns3::WimaxChannel >
Cns3::Ptr< ns3::WimaxConnection >
Cns3::Ptr< ns3::WimaxMacQueue >
Cns3::Ptr< ns3::WimaxNetDevice >
Cns3::Ptr< ns3::WimaxPhy >
Cns3::Ptr< ns3::X2CellInfo >
Cns3::Ptr< ns3::X2IfaceInfo >
Cns3::Ptr< ns3::YansWifiChannel >
Cns3::Ptr< Object >
Cns3::Ptr< OcbWifiMac >
Cns3::Ptr< ofi::Controller >
Cns3::Ptr< OpenFlowSwitchNetDevice >
Cns3::Ptr< OutputStreamWrapper >
Cns3::Ptr< Packet >
Cns3::Ptr< PacketSink >
Cns3::Ptr< PbbPacket >
Cns3::Ptr< PeerManagementProtocolMac >
Cns3::Ptr< PointToPointEpcHelper >
Cns3::Ptr< PropagationLossModel >
Cns3::Ptr< RadvdInterface >
Cns3::Ptr< RadvdPrefix >
Cns3::Ptr< RandomVariableStream >
Cns3::Ptr< RoutingHelper >
Cns3::Ptr< SampleEmitter >
Cns3::Ptr< SimpleDeviceEnergyModel >
Cns3::Ptr< Socket >
Cns3::Ptr< SpectrumModel >
Cns3::Ptr< SpectrumPhy >
Cns3::Ptr< SpectrumValue >
Cns3::Ptr< TcpOption >
Cns3::Ptr< TimeMinMaxAvgTotalCalculator >
Cns3::Ptr< TraceFadingLossModel >
Cns3::Ptr< UniformRandomVariable >
Cns3::Ptr< VirtualNetDevice >
Cns3::Ptr< WaveNetDevice >
Cns3::Ptr< WaypointMobilityModel >
Cns3::Ptr< WifiInformationElement >
Cns3::Ptr< WifiPhy >
Cns3::Ptr< WifiPhyStats >
Cns3::Ptr< WifiRemoteStationManager >
Cns3::Ptr< YansWifiPhy >
CTypeTraits< T >::PtrBase< U >	Base type of a Ptr
CTypeTraits< T >::PtrBase< ns3::Ptr< U > >	Base type of a Ptr
►CPtrTestBase
CNoCount
CTypeTraits< T >::PtrToMemberTraits< U >	Not a pointer to member type
CTypeTraits< T >::PtrToMemberTraits< U(V::*)(void) const >	Pointer to const member function
CTypeTraits< T >::PtrToMemberTraits< U(V::*)(void)>	Pointer to member function
CTypeTraits< T >::PtrToMemberTraits< U(V::*)(W1) const >	Pointer to const member function
CTypeTraits< T >::PtrToMemberTraits< U(V::*)(W1)>	Pointer to member function
CTypeTraits< T >::PtrToMemberTraits< U(V::*)(W1, W2) const >	Pointer to const member function
CTypeTraits< T >::PtrToMemberTraits< U(V::*)(W1, W2)>	Pointer to member function
CTypeTraits< T >::PtrToMemberTraits< U(V::*)(W1, W2, W3) const >	Pointer to const member function
CTypeTraits< T >::PtrToMemberTraits< U(V::*)(W1, W2, W3)>	Pointer to member function
CTypeTraits< T >::PtrToMemberTraits< U(V::*)(W1, W2, W3, W4) const >	Pointer to const member function
CTypeTraits< T >::PtrToMemberTraits< U(V::*)(W1, W2, W3, W4)>	Pointer to member function
CTypeTraits< T >::PtrToMemberTraits< U(V::*)(W1, W2, W3, W4, W5) const >	Pointer to const member function
CTypeTraits< T >::PtrToMemberTraits< U(V::*)(W1, W2, W3, W4, W5)>	Pointer to member function
CTypeTraits< T >::PtrToMemberTraits< U(V::*)(W1, W2, W3, W4, W5, W6) const >	Pointer to const member function
CTypeTraits< T >::PtrToMemberTraits< U(V::*)(W1, W2, W3, W4, W5, W6)>	Pointer to member function
Cns3::PyViz	Helper class to be used by the visualizer
Cns3::qos_rb_and_CQI_assigned_to_lc
Cns3::QosBlockedDestinations	Keep track of destination address - TID pairs that are waiting for a block ACK response
Cns3::LteRrcSap::QuantityConfig
Cns3::dot11s::HwmpProtocol::QueuedPacket	Packet waiting its routing information
Cns3::WimaxMacQueue::QueueElement
Cns3::aodv::QueueEntry	AODV Queue Entry
Cns3::dsdv::QueueEntry	DSDV Queue Entry
Cns3::LteUeCmacSapProvider::RachConfig
Cns3::LteEnbCmacSapProvider::RachConfig	Struct defining the RACH configuration of the MAC
Cns3::LteRrcSap::RachConfigCommon
Cns3::LteRrcSap::RachConfigDedicated
Cns3::RachListElement_s	See section 4.3.6 rachListElement
Cns3::RadioBearerStatsConnector	This class is very useful when user needs to collect statistics from PDCD and RLC
Cns3::LteRrcSap::RadioResourceConfigCommon
Cns3::LteRrcSap::RadioResourceConfigCommonSib
Cns3::LteRrcSap::RadioResourceConfigDedicated
Cns3::RadvdHelper	Radvd application helper
►Cns3::RandomStream	A simple wrapper around RngStream to make testing of the code easier
Cns3::RealRandomStream
Cns3::TestRandomStream
Cns3::RandomVariableChecker	AttributeChecker implementation for RandomVariableValue
Cns3::RandomVariableStreamHelper	Helper class for static methods involving RandomVariableStream
Cns3::RandomVariableValue	AttributeValue implementation for RandomVariable
Cns3::RarLteControlMessage::Rar	MAC RAR and the corresponding RAPID subheader
Cns3::LteRrcSap::RaSupervisionInfo
Cns3::RateInfo	A struct to contain all information related to a data rate
Cns3::dot11s::HwmpRtable::ReactiveRoute
Cns3::dsr::ReceivedRreqEntry	The request entry for intermediate nodes to check if they have received this request or not This is used to control the duplication request from being processed
Cns3::LtePdcpSapUser::ReceivePdcpSduParameters	Parameters for LtePdcpSapUser::ReceivePdcpSdu
Cns3::Rectangle	2d rectangle
Cns3::LteRrcSap::ReestabUeIdentity
CNs2MobilityHelperTest::ReferencePoint	Single record in mobility reference
CTypeTraits< T >::ReferenceTraits< U >	Not a reference type
CTypeTraits< T >::ReferenceTraits< U & >	Reference type
Cns3::EpcX2Sap::RelativeNarrowbandTxBand	Relative Narrowband Tx Power (RNTP) as it is used in the LOAD INFORMATION message
Cns3::RemoteChannelBundleManager
Cns3::RadioEnvironmentMapHelper::RemPoint	A complete Radio Environment Map is composed of many of this structure
Cns3::LteMacSapProvider::ReportBufferStatusParameters	Parameters for LteMacSapProvider::ReportBufferStatus
Cns3::LteRrcSap::ReportConfigEutra	Specifies criteria for triggering of an E-UTRA measurement reporting event
Cns3::LteRrcSap::ReportConfigToAddMod
Cns3::UanMacRcGw::Request	Reservation request
Cns3::aodv::RequestQueue	AODV route request queue
Cns3::Reservation	Stores reservation info for use in scheduling data channel by reservation channel MAC
Cns3::Time::Resolution	Current time unit, and conversion info
Cns3::Resolver	Abstract class to parse Config paths into object references
Cns3::EpcX2Sap::ResourceStatusUpdateParams	Parameters of the RESOURCE STATUS UPDATE message
Cns3::TestCase::Result	Container for results from a TestCase
Cns3::LteRlcAm::RetxPdu
Cns3::AnimationInterface::Rgb
Crgb
Cns3::LteRrcSap::RlcConfig
Cns3::RlcPduListElement_s	See section 4.3.9 rlcPDU_ListElement
Cns3::RngSeedManager	Manage the seed number and run number of the underlying random number generator, and automatic assignment of stream numbers
Cns3::RngStream	Combined Multiple-Recursive Generator MRG32k3a
CRoom
Cns3::RandomRoomPositionAllocator::RoomInfo
Cns3::flame::FlameRtable::Route	Routing table entry
Cns3::dsr::RouteCacheEntry
CRoutingExperiment
CRoutingStats	Manages collects statistics on routing data (application-data packet and byte counts) for the vehicular network
Cns3::dsdv::RoutingTable	The Routing table used by DSDV protocol
Cns3::aodv::RoutingTable	The Routing table used by AODV protocol
Cns3::aodv::RoutingTableEntry	Routing table entry
Cns3::olsr::RoutingTableEntry	An OLSR's routing table entry
Cns3::dsdv::RoutingTableEntry	Routing table entry
Cns3::LteRrcSap::RrcConnectionReconfiguration
Cns3::LteRrcSap::RrcConnectionReconfigurationCompleted
Cns3::LteRrcSap::RrcConnectionReestablishment
Cns3::LteRrcSap::RrcConnectionReestablishmentComplete
Cns3::LteRrcSap::RrcConnectionReestablishmentReject
Cns3::LteRrcSap::RrcConnectionReestablishmentRequest
Cns3::LteRrcSap::RrcConnectionReject
Cns3::LteRrcSap::RrcConnectionRelease
Cns3::LteRrcSap::RrcConnectionRequest
Cns3::LteRrcSap::RrcConnectionSetup
Cns3::LteRrcSap::RrcConnectionSetupCompleted
Cns3::dsr::RreqTableEntry	The route request table entries
Cns3::RttHistory	Helper class to store RTT measurements
Cns3::RxSpectrumModelInfo
Cns3::SbMeasResult_s	See section 4.3.25 sbMeasResult
Cgrid.ScaleRenderer
Cns3::FfMacSchedSapUser::SchedDlConfigIndParameters	Parameters of the API primitives
Cns3::FfMacSchedSapProvider::SchedDlCqiInfoReqParameters	Parameters of the SCHED_DL_CQI_INFO_REQ primitive
Cns3::FfMacSchedSapProvider::SchedDlMacBufferReqParameters	Parameters of the SCHED_DL_MAC_BUFFER_REQ primitive
Cns3::FfMacSchedSapProvider::SchedDlPagingBufferReqParameters	Parameters of the SCHED_DL_PAGING_BUFFER_REQ primitive
Cns3::FfMacSchedSapProvider::SchedDlRachInfoReqParameters	Parameters of the SCHED_DL_RACH_INFO_REQ primitive
Cns3::FfMacSchedSapProvider::SchedDlRlcBufferReqParameters	Parameters of the API primitives
Cns3::FfMacSchedSapProvider::SchedDlTriggerReqParameters	Parameters of the SCHED_DL_TRIGGER_REQ primitive
Cns3::FfMacSchedSapUser::SchedUlConfigIndParameters	Parameters of the SCHED_UL_CONFIG_IND primitive
Cns3::FfMacSchedSapProvider::SchedUlCqiInfoReqParameters	Parameters of the SCHED_UL_CQI_INFO_REQ primitive
Cns3::FfMacSchedSapProvider::SchedUlMacCtrlInfoReqParameters	Parameters of the SCHED_UL_MAC_CTRL_INFO_REQ primitive
Cns3::FfMacSchedSapProvider::SchedUlNoiseInterferenceReqParameters	Parameters of the SCHED_UL_NOISE_INTERFERENCE_REQ primitive
Cns3::FfMacSchedSapProvider::SchedUlSrInfoReqParameters	Parameters of the SCHED_UL_SR_INFO_REQ primitive
Cns3::FfMacSchedSapProvider::SchedUlTriggerReqParameters	Parameters of the SCHED_UL_TRIGGER_REQ primitive
Cns3::SchInfo
►CScrolledWindow
Cshow_last_packets.ShowLastPackets.PacketList
Cns3::dsr::SendBuffEntry	DSR Send Buffer Entry
Cns3::dsr::SendBuffer	DSR send buffer
►Cns3::SendParams	Defines the parameters with which Send() function of a particular PHY is called
Cns3::OfdmSendParams
Cns3::SentBuffer	Tracks non-blocking sends
Cns3::SequenceNumber< NUMERIC_TYPE, SIGNED_TYPE >	Generic "sequence number" class
Cns3::SequenceNumber10
Cns3::SequenceNumber< uint32_t, int32_t >
Cns3::SequenceNumber< uint8_t, int8_t >
Cns3::ServiceFlow	This class implements service flows as described by the IEEE-802.16 standard
Cns3::ServiceFlowRecord	This class implements a structure to manage some parameters and statistics related to a service flow
Cns3::LteUeRrcSapUser::SetupParameters
Cns3::LteEnbRrcSapUser::SetupUeParameters
Cns3::BuildingsPropagationLossModel::ShadowingLoss
Cns3::SiConfiguration_s	See section 4.3.21 siConfiguration
Cns3::signalNoiseDbm
Cns3::SiMessageListElement_s	See section 4.3.22 siMessageListElement
Cns3::SimpleNetDeviceHelper	Build a set of SimpleNetDevice objects
Cns3::simpleOfdmSendParam
Cns3::SimulationSingleton< T >	This singleton class template ensures that the type for which we want a singleton has a lifetime bounded by the simulation run lifetime
Cns3::Simulator	Control the scheduling of simulation events
Cns3::SixLowPanDispatch	Dispatch header helper
Cns3::SixLowPanHelper	Setup a sixlowpan stack to be used as a shim between IPv6 and a generic NetDevice
Cns3::PacketMetadata::SmallItem	SmallItem structure
Cns3::InterferenceHelper::SnrPer	A struct for both SNR and PER
Cns3::SNRToBlockErrorRateManager	This class handles the SNR to BlcER traces
Cns3::SNRToBlockErrorRateRecord	This class represents a record (handled by SnrToBlockErrorRate manager) that keeps a mapping between an SNR value and its corresponding (1) Bit Error Rate, (2) Block Error Rate, (3) Standard deviation, (4 and 5) confidence interval
Cns3::EpcX2Sap::SnStatusTransferParams	Parameters of the SN STATUS TRANSFER message
Cns3::LteRrcSap::SoundingRsUlConfigCommon
Cns3::LteRrcSap::SoundingRsUlConfigDedicated
Cns3::SpectrumAnalyzerHelper
Cns3::SpectrumChannelHelper
Cns3::SpectrumPhyHelper	Create and configure several SpectrumPhy instances and connect them to a channel
Cns3::LteRrcSap::SpeedStatePars
Cns3::LteRrcSap::SpeedStateScaleFactors
Cns3::SPFVertex	Vertex used in shortest path first (SPF) computations
Cns3::SpsConfig_s	See section 4.3.17 spsConfig
Cns3::LteRrcSap::SrbToAddMod
Cns3::SrConfig_s	See section 4.3.18 srConfig
Cns3::SrListElement_s	See section 4.3.13 srListElement
Cns3::SSRecord	This class is used by the base station to store some information related to subscriber station in the cell
CStackHelper	Helper to set or get some IPv6 information about nodes
Cns3::static_SpectrumModel300Khz300GhzLog_initializer
Cns3::static_SpectrumModelIsm2400MhzRes1Mhz_initializer
CStaticInformation	Gather aggregation and configuration path information from registered types
►Cns3::StatisticalSummary	Abstract class for calculating statistical data
Cns3::MinMaxAvgTotalCalculator< double >
Cns3::MinMaxAvgTotalCalculator< uint32_t >
Cns3::MinMaxAvgTotalCalculator< uint64_t >
Cns3::MinMaxAvgTotalCalculator< T >	Template class MinMaxAvgTotalCalculator
Cns3::dot11s::PeerManagementProtocol::Statistics
Cns3::MeshWifiInterfaceMac::Statistics
Cns3::MeshPointDevice::Statistics
Cns3::dot11s::HwmpProtocolMac::Statistics
Cns3::flame::FlameProtocol::Statistics
Cns3::flame::FlameProtocolMac::Statistics
Cns3::dot11s::PeerManagementProtocolMac::Statistics
Cns3::dot11s::HwmpProtocol::Statistics
Cns3::RedQueue::Stats	Stats
Cns3::ofi::Stats
Cns3::ofi::StatsDumpCallback	Callback for a stats dump request
Cns3::LtePdcp::Status	Status variables of the PDCP
Cns3::StatusCode	Status code for association response
Cns3::ofi::SwitchPacketMetadata	Packet Metadata, allows us to track the packet's metadata as it passes through the switch
Cns3::SystemCondition	A class which provides a relatively platform-independent conditional-wait thread synchronization primitive
Cns3::SystemConditionPrivate	Implementation of SystemCondition for Unix-like systems
Cns3::LteRrcSap::SystemInformation
Cns3::LteRrcSap::SystemInformationBlockType1
Cns3::LteRrcSap::SystemInformationBlockType2
Cns3::SystemMutex	A class which provides a relatively platform-independent Mutual Exclusion thread synchronization primitive
Cns3::SystemMutexPrivate	System-dependent implementation of SystemMutex
Cns3::SystemWallClockMs	Measure elapsed wall clock time in milliseconds
Cns3::SystemWallClockMsPrivate	System-dependent implementation for SystemWallClockMs
Cns3::TagBuffer	Read and write tag data
Cns3::PacketTagList::TagData	Tree node for sharing serialized tags
Cns3::Tap	Holds PDP Tap information (amplitude and delay)
Cns3::TapBridgeHelper	Build TapBridge to allow ns-3 simulations to interact with Linux tap devices and processes on the Linux host
Cns3::TbId_t
Cns3::tbInfo_t
Cns3::TbStats_t
Cns3::olsr::MessageHeader::Tc
Cns3::tdbetsFlowPerf_t
Cns3::tdtbfqsFlowPerf_t	Flow information
CTestBase.TestBaseClass
►CTestCase
Cpython-unit-tests.TestSimulator
Cns3::TestCaseFailure	Container for details of a test failure
CTestCaseHelper
Cns3::Ptr< T >::Tester	Helper to test for null pointer
Cns3::TestRunner	A runner to execute tests
Cns3::TestUtils
CTestUtils
CTwoRayGroundPropagationLossModelTestCase::TestVector
CLogDistancePropagationLossModelTestCase::TestVector
CFriisPropagationLossModelTestCase::TestVector
►CTextView
►Cvisualizer.ipython_view.ConsoleView
Cvisualizer.ipython_view.IPythonView
►CThread
Cvisualizer.core.SimulationThread
Cns3::LteRrcSap::ThresholdEutra	Threshold for event evaluation
Cns3::RraaWifiManager::ThresholdsItem
Cns3::Time	Simulation virtual time values and global simulation resolution
Cns3::TimeChecker	AttributeChecker implementation for TimeValue
Cgrid.Timeline
Cgrid.TimelineDataRange
Cgrid.TimelineEvent
Cgrid.Timelines
Cgrid.TimelinesRenderer
Cns3::Timer	A simple Timer class
►Cns3::TimerImpl	The timer implementation underlying Timer and Watchdog
Cns3::TimerImplFive< T1, T2, T3, T4, T5 >	TimerImpl specialization class for varying numbers of arguments
Cns3::TimerImplFour< T1, T2, T3, T4 >	TimerImpl specialization class for varying numbers of arguments
Cns3::TimerImplOne< T1 >	TimerImpl specialization class for varying numbers of arguments
Cns3::TimerImplSix< T1, T2, T3, T4, T5, T6 >	TimerImpl specialization class for varying numbers of arguments
Cns3::TimerImplThree< T1, T2, T3 >	TimerImpl specialization class for varying numbers of arguments
Cns3::TimerImplTwo< T1, T2 >	TimerImpl specialization class for varying numbers of arguments
Cns3::TimerImplMemberTraits< T >	Helper for the MakeTimerImpl functions which take a class method
Cns3::TimerImplMemberTraits< T * >	Helper for the MakeTimerImpl functions which take a class method
Cns3::TimerTraits< T >	Type and reference traits for TimerImpl arguments
Cns3::TimeWithUnit	A Time with attached unit, to facilitate output in that unit
►Cns3::TlvValue	The value field of a tlv can take different values (uint8_t, uint16, vector...)
Cns3::Ipv4AddressTlvValue
Cns3::PortRangeTlvValue
Cns3::ProtocolTlvValue
Cns3::TosTlvValue
Cns3::U16TlvValue
Cns3::U32TlvValue
Cns3::U8TlvValue
►Cns3::VectorTlvValue	This class is used to implement a vector of values in one tlv value field
Cns3::ClassificationRuleVectorTlvValue	This class implements the classifier descriptor as a tlv vector
Cns3::CsParamVectorTlvValue	This class implements the convergence sub-layer descriptor as a tlv vector
Cns3::SfVectorTlvValue
Cgrid.TopLegendRenderer
Cns3::TopologyReaderHelper	Helper class which makes it easier to configure and use a generic TopologyReader
Cns3::olsr::TopologyTuple	A Topology Tuple
Cns3::TracedCallback< T1, T2, T3, T4, T5, T6, T7, T8 >	Forward calls to a chain of Callback
Cns3::TracedCallback< bool, bool >
Cns3::TracedCallback< const ns3::dsr::DsrOptionSRHeader & >
Cns3::TracedCallback< const ns3::Ipv4Header &, ns3::Ptr< const ns3::Packet >, DropReason, ns3::Ptr< ns3::Ipv4 >, uint32_t >
Cns3::TracedCallback< const ns3::Ipv4Header &, ns3::Ptr< const ns3::Packet >, uint32_t >
Cns3::TracedCallback< const ns3::Ipv6Header &, ns3::Ptr< const ns3::Packet >, DropReason, ns3::Ptr< ns3::Ipv6 >, uint32_t >
Cns3::TracedCallback< const ns3::Ipv6Header &, ns3::Ptr< const ns3::Packet >, uint32_t >
Cns3::TracedCallback< const ns3::olsr::PacketHeader &, const MessageList & >
Cns3::TracedCallback< const ns3::WifiMacHeader & >
Cns3::TracedCallback< double, double >
Cns3::TracedCallback< double, int, float >
Cns3::TracedCallback< DropReason, ns3::Ptr< const ns3::Packet >, ns3::Ptr< ns3::SixLowPanNetDevice >, uint32_t >
Cns3::TracedCallback< enum Test_e, enum Test_e >
Cns3::TracedCallback< int16_t, int16_t >
Cns3::TracedCallback< int32_t, int32_t >
Cns3::TracedCallback< int8_t, int8_t >
Cns3::TracedCallback< LrWpanMacState, LrWpanMacState >
Cns3::TracedCallback< LrWpanPhyEnumeration, LrWpanPhyEnumeration >
Cns3::TracedCallback< Mac48Address, Mac48Address >
Cns3::TracedCallback< ns3::Address, ns3::Address >
Cns3::TracedCallback< ns3::Mac48Address >
Cns3::TracedCallback< ns3::PhyReceptionStatParameters >
Cns3::TracedCallback< ns3::PhyTransmissionStatParameters >
Cns3::TracedCallback< ns3::Ptr< const ns3::MobilityModel > >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet > >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, const ns3::Address & >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, const ns3::Mac48Address & >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, double >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, double, ns3::UanTxMode >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, double, ns3::WifiMode, enum WifiPreamble >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, ns3::Mac48Address >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, ns3::Mac48Address, const ns3::Cid & >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, ns3::Mac48Address, ns3::Cid >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, ns3::Ptr< ns3::Ipv4 >, uint32_t >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, ns3::Ptr< ns3::Ipv6 >, uint32_t >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, ns3::Ptr< ns3::NetDevice >, ns3::Ptr< ns3::NetDevice >, ns3::Time, ns3::Time >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, ns3::Ptr< ns3::SixLowPanNetDevice >, uint32_t >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, ns3::UanAddress >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, ns3::UanTxMode >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, ns3::WifiMode, WifiPreamble, uint8_t >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, uint16_t >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, uint16_t, uint16_t, uint32_t, WifiPreamble, ns3::WifiTxVector, struct ns3::mpduInfo >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, uint16_t, uint16_t, uint32_t, WifiPreamble, ns3::WifiTxVector, struct ns3::mpduInfo, struct ns3::signalNoiseDbm >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, uint32_t >
Cns3::TracedCallback< ns3::Ptr< const ns3::Packet >, uint8_t, uint8_t >
Cns3::TracedCallback< ns3::Ptr< const ns3::PacketBurst > >
Cns3::TracedCallback< ns3::Ptr< const ns3::PacketBurst >, ns3::Mac48Address, const ns3::Cid &, ns3::WimaxPhy::ModulationType >
Cns3::TracedCallback< ns3::Ptr< const ns3::SpectrumValue > >
Cns3::TracedCallback< ns3::Ptr< ns3::PacketBurst > >
Cns3::TracedCallback< ns3::Ptr< ns3::SpectrumPhy >, ns3::Ptr< ns3::SpectrumPhy >, double >
Cns3::TracedCallback< ns3::SequenceNumber, ns3::SequenceNumber >
Cns3::TracedCallback< ns3::Time >
Cns3::TracedCallback< ns3::Time, LrWpanPhyEnumeration, LrWpanPhyEnumeration >
Cns3::TracedCallback< ns3::Time, ns3::Time >
Cns3::TracedCallback< ns3::Time, ns3::Time, enum ns3::WifiPhy::State >
Cns3::TracedCallback< ns3::Time, ns3::Time, uint32_t, uint32_t, double, uint32_t, double >
Cns3::TracedCallback< Ptr< const Packet > >
Cns3::TracedCallback< SequenceNumber32, SequenceNumber32 >
Cns3::TracedCallback< State, State >
Cns3::TracedCallback< T, T >
Cns3::TracedCallback< T1 >
Cns3::TracedCallback< T1, T2 >
Cns3::TracedCallback< T1, T2, T3 >
Cns3::TracedCallback< T1, T2, T3, T4 >
Cns3::TracedCallback< T1, T2, T3, T4, T5 >
Cns3::TracedCallback< TcpStates_t, TcpStates_t >
Cns3::TracedCallback< Time, Time >
Cns3::TracedCallback< uint16_t, ns3::Ptr< ns3::SpectrumValue > >
Cns3::TracedCallback< uint16_t, uint16_t >
Cns3::TracedCallback< uint16_t, uint16_t, double >
Cns3::TracedCallback< uint16_t, uint16_t, double, double >
Cns3::TracedCallback< uint16_t, uint16_t, double, double, bool >
Cns3::TracedCallback< uint16_t, uint16_t, State, State >
Cns3::TracedCallback< uint16_t, uint8_t >
Cns3::TracedCallback< uint16_t, uint8_t, uint32_t >
Cns3::TracedCallback< uint16_t, uint8_t, uint32_t, uint64_t >
Cns3::TracedCallback< uint32_t >
Cns3::TracedCallback< uint32_t, ns3::Mac48Address >
Cns3::TracedCallback< uint32_t, uint32_t >
Cns3::TracedCallback< uint32_t, uint32_t, uint16_t, uint8_t, uint16_t >
Cns3::TracedCallback< uint32_t, uint32_t, uint16_t, uint8_t, uint16_t, uint8_t, uint16_t >
Cns3::TracedCallback< uint64_t, uint16_t >
Cns3::TracedCallback< uint64_t, uint16_t, uint16_t >
Cns3::TracedCallback< uint64_t, uint16_t, uint16_t, ns3::LteRrcSap::MeasurementReport >
Cns3::TracedCallback< uint64_t, uint16_t, uint16_t, State, State >
Cns3::TracedCallback< uint64_t, uint16_t, uint16_t, uint16_t >
Cns3::TracedCallback< uint8_t, ns3::Mac48Address >
Cns3::TracedCallback< uint8_t, uint8_t >
Cns3::TracedCallback< ValueClassTest, ValueClassTest >
Canonymous_namespace{traced-callback-typedef-test-suite.cc}::TracedCbSink< T1, T2, T3, T4, T5 >	Sink functions
Canonymous_namespace{traced-callback-typedef-test-suite.cc}::TracedCbSink< T1, empty, empty, empty, empty >
Canonymous_namespace{traced-callback-typedef-test-suite.cc}::TracedCbSink< T1, T2, empty, empty, empty >
Canonymous_namespace{traced-callback-typedef-test-suite.cc}::TracedCbSink< T1, T2, T3, empty, empty >
Canonymous_namespace{traced-callback-typedef-test-suite.cc}::TracedCbSink< T1, T2, T3, T4, empty >
Cns3::TracedValue< T >	Trace classes with value semantics
Cns3::TracedValue< bool >
Cns3::TracedValue< double >
Cns3::TracedValue< enum Test_e >
Cns3::TracedValue< int16_t >
Cns3::TracedValue< int32_t >
Cns3::TracedValue< int8_t >
Cns3::TracedValue< LrWpanMacState >
Cns3::TracedValue< LrWpanPhyEnumeration >
Cns3::TracedValue< ns3::SequenceNumber >
Cns3::TracedValue< ns3::Time >
Cns3::TracedValue< SequenceNumber32 >
Cns3::TracedValue< TcpStates_t >
Cns3::TracedValue< Time >
Cns3::TracedValue< uint16_t >
Cns3::TracedValue< uint32_t >
Cns3::TracedValue< uint8_t >
Cns3::TracedValue< ValueClassTest >
Cns3::UdpTraceClient::TraceEntry	Entry to send
Cns3::TypeId::TraceSourceInformation	TraceSource implementation
Cns3::FlowMonitor::TrackedPacket	Structure to represent a single tracked packet data
Cns3::TransmissionModesLayers
Cns3::PyViz::TransmissionSample
Cns3::PyViz::TransmissionSampleKey
Cns3::PyViz::TransmissionSampleValue
Cns3::LteRlcSapProvider::TransmitPdcpPduParameters	Parameters for LteRlcSapProvider::TransmitPdcpPdu
Cns3::LtePdcpSapProvider::TransmitPdcpSduParameters	Parameters for LtePdcpSapProvider::TransmitPdcpSdu
Cns3::LteMacSapProvider::TransmitPduParameters	Parameters for LteMacSapProvider::TransmitPdu
CTunnel
Cns3::TvSpectrumModelId
Cns3::TvSpectrumTransmitterHelper	Helper class which uses TvSpectrumTransmitter class to create customizable TV transmitter(s) that transmit PSD spectrum specified by user-set attributes
Cns3::olsr::TwoHopNeighborTuple	A 2-hop Tuple
Cns3::TxInfo
Cns3::TxProfile
Cns3::LrWpanMac::TxQueueElement	Helper structure for managing transmission queue elements
Cns3::PyViz::TxRecordValue
Cns3::TxSpectrumModelInfo
Cns3::TypeId	Unique identifier for an interface
CTypeTraits< T >	Inspect a type to deduce its features
CTypeTraits< empty >
CTypeTraits< T1 >
CTypeTraits< T2 >
CTypeTraits< T3 >
CTypeTraits< T4 >
CTypeTraits< T5 >
CTypeTraits< TX >
CTypeTraits< TX1 >
CTypeTraits< TX2 >
CTypeTraits< TX3 >
Cns3::UanAddress	A class used for addressing UAN MAC's
Cns3::UanHelper	UAN configuration helper
Cns3::UanModesList	Container for UanTxModes
Cns3::UanPacketArrival	Class consisting of packet arrival information (Time, RxPower, mode, PDP)
Cns3::UanPdp	The power delay profile returned by propagation models
►Cns3::UanPhyListener	Interface for PHY event listener
Cns3::UanMacCw	CW-MAC protocol, similar in idea to the 802.11 DCF with constant backoff window
Cns3::UanTxMode	Abstraction of packet modulation information
Cns3::UanTxModeFactory	Global database of UanTxMode objects, retrievable by id or name
Cns3::UanTxModeFactory::UanTxModeItem	Container for the UanTxMode properties
►Cns3::UcdChannelEncodings	This class implements the UCD channel encodings as described by "IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems" 11.3.1 UCD channel encodings, page 651
Cns3::OfdmUcdChannelEncodings
Cns3::UdpClientHelper	Create a client application which sends UDP packets carrying a 32bit sequence number and a 64 bit time stamp
Cns3::UdpEchoClientHelper	Create an application which sends a UDP packet and waits for an echo of this packet
Cns3::UdpEchoServerHelper	Create a server application which waits for input UDP packets and sends them back to the original sender
Cns3::UdpServerHelper	Create a server application which waits for input UDP packets and uses the information carried into their payload to compute delay and to determine if some packets are lost
Cns3::UdpTraceClientHelper	Create UdpTraceClient application which sends UDP packets based on a trace file of an MPEG4 stream
Cns3::UeCapabilities_s	See section 4.3.20 ueCapabilities
Cns3::LteEnbCmacSapProvider::UeConfig	Parameters for [re]configuring the UE
Cns3::LteEnbCmacSapUser::UeConfig	Parameters for [re]configuring the UE
Cns3::EpcX2Sap::UeContextReleaseParams	Parameters of the UE CONTEXT RELEASE message
CLteX2HandoverTestCase::UeData
CLteX2HandoverMeasuresTestCase::UeData
Cns3::EpcX2Sap::UeDataParams	Parameters of the UE DATA primitive
CUeDlTestData
Cns3::LteUeCphySapUser::UeMeasurementsElement	Parameters of the ReportUeMeasurements primitive: RSRP [dBm] and RSRQ [dB] See section 5.1.1 and 5.1.3 of TS 36.214
Cns3::LteUePhy::UeMeasurementsElement	Summary results of measuring a specific cell. Used for layer-1 filtering
Cns3::LteUeCphySapUser::UeMeasurementsParameters
Cns3::UeSelected_s	See section 4.3.26 ueSelected
CLteCellSelectionTestCase::UeSetup_t	A set of input parameters for setting up a UE in the simulation
CUeTestData
CUeUlTestData
Cns3::UintegerChecker	AttributeChecker implementation for UintegerValue
Cns3::UlCqi_s	See section 4.3.29 ulCQI
Cns3::UlDciListElement_s	See section 4.3.2 ulDciListElement
Cns3::UlGrant_s	Substitutive structure for specifying BuildRarListElement_s::m_grant field
Cns3::EpcX2Sap::UlHighInterferenceInformationItem	UL High Interference Information as it is used in the LOAD INFORMATION message
Cns3::EpcS11Sap::Uli	TS 29.274 8.21 User Location Information (ULI)
Cns3::UlInfoListElement_s	See section 4.3.12 ulInfoListElement
►Cunary_function
Cns3::Ipv4AddressHash	Class providing an hash for IPv4 addresses
Cns3::Ipv6AddressHash	Hash function class for IPv6 addresses
CTypeTraits< T >::UnConst< U >	Not a const type
CTypeTraits< T >::UnConst< const U >	Const type
Cns3::aodv::IdCache::UniqueId	Unique packet ID
Cns3::V4PingHelper	Create a IPv5 ping application and associate it to a node
Cns3::EmpiricalRandomVariable::ValueCDF	Helper to hold one point of the CDF
CValueClassTest	Test class for TracedValue callbacks
Cns3::ValueClassTestChecker	AttributeChecker implementation for ValueClassTestValue
Cns3::ValueClassTestValue	AttributeValue implementation for ValueClassTest
Cns3::LteUeRrc::VarMeasConfig	Includes the accumulated configuration of the measurements to be performed by the UE
Cns3::LteUeRrc::VarMeasReport	Represents a single measurement reporting entry., which includes information about a measurement for which the triggering conditions have been met
►Cstd::vector< T >	STL class
Cns3::ByteTagListDataFreeList	Container class for struct ByteTagListData
Cns3::PacketMetadata::DataFreeList	Class to hold all the metadata
Cns3::anonymous_namespace{pyviz.cc}::FastClipping::Vector2
Cns3::Vector2D	2d vector
Cns3::Vector3D	3d vector
Cns3::VendorSpecificContentManager
Cns3::VendorSpecificListElement_s	See section 4.3.3 vendorSpecifiListElement
Cns3::ofi::VPortAction	Class for handling virtual port table actions
Cns3::VsaInfo
Cns3::VsaManager::VsaWork
Cns3::Watchdog	A very simple watchdog operating in virtual time
Cns3::WaveBsmHelper	Manages IEEE 1609 WAVE (Wireless Access in Vehicular Environments) Basic Safety Messages (BSMs) and uses the WaveBsmStats class to manage statistics about BSMs transmitted and received The BSM is a ~200-byte packet that is generally broadcast from every vehicle at a nominal rate of 10 Hz
Cns3::ChannelManager::WaveChannel
Cns3::WaveformGeneratorHelper
Cns3::WaveHelper	Helps to create WaveNetDevice objects
CWaveNetDeviceExample	This simulation is to show the routing service of WaveNetDevice described in IEEE 09.4
Cns3::Waypoint	(time, location) pair
►CWifiApp	Enforces program flow for ns-3 wifi applications
CVanetRoutingExperiment	Implements a wifi app that allows VANET routing experiments to be simulated
►Cns3::WifiHelper	Helps to create WifiNetDevice objects
Cns3::Wifi80211pHelper	Helps to create wifi 802.11p objects of WifiNetDevice class
►Cns3::WifiMacHelper	Create MAC objects
►Cns3::NqosWifiMacHelper	Create non QoS-enabled MAC layers for a ns3::WifiNetDevice
Cns3::NqosWaveMacHelper
►Cns3::QosWifiMacHelper	Create QoS-enabled MAC layers for a ns3::WifiNetDevice
Cns3::HtWifiMacHelper	Create HT-enabled MAC layers for a ns3::WifiNetDevice
Cns3::QosWaveMacHelper
Cns3::VhtWifiMacHelper	Create VHT-enabled MAC layers for a ns3::WifiNetDevice
Cns3::WifiMode	Represent a single transmission modeA WifiMode is implemented by a single integer which is used to lookup in a global array the characteristics of the associated transmission mode
Cns3::WifiModeFactory	Create WifiMode class instances and keep track of them
Cns3::WifiModeFactory::WifiModeItem	This is the data associated to a unique WifiMode
►Cns3::WifiPhyHelper	Create PHY objects
Cns3::YansWifiPhyHelper	Make it easy to create and manage PHY objects for the yans model
►Cns3::WifiPhyListener	Receive notifications about phy events
Cns3::PhyListener	Listener for PHY events
Cns3::PhyMacLowListener	Listener for PHY events
Cns3::WifiRadioEnergyModelPhyListener	A WifiPhy listener class for notifying the WifiRadioEnergyModel of Wifi radio state change
►Cns3::WifiRemoteStation	Hold per-remote-station state
Cns3::AarfcdWifiRemoteStation	Hold per-remote-station state for AARF-CD Wifi manager
Cns3::AarfWifiRemoteStation	Hold per-remote-station state for AARF Wifi manager
Cns3::AmrrWifiRemoteStation	Hold per-remote-station state for AMRR Wifi manager
Cns3::AparfWifiRemoteStation	Hold per-remote-station state for APARF Wifi manager
Cns3::ArfWifiRemoteStation	Hold per-remote-station state for ARF Wifi manager
Cns3::CaraWifiRemoteStation	Hold per-remote-station state for CARA Wifi manager
Cns3::IdealWifiRemoteStation	Hold per-remote-station state for Ideal Wifi manager
Cns3::MinstrelWifiRemoteStation	Hold per-remote-station state for Minstrel Wifi manager
Cns3::OnoeWifiRemoteStation	Hold per-remote-station state for ONOE Wifi manager
Cns3::ParfWifiRemoteStation	Hold per-remote-station state for PARF Wifi manager
Cns3::RraaWifiRemoteStation	Hold per-remote-station state for RRAA Wifi manager
Cns3::WifiRemoteStationInfo	Tid independent remote station statistics
Cns3::WifiRemoteStationState	A struct that holds information about each remote station
Cns3::WifiSpectrumModel5MhzInitializer
Cns3::WifiSpectrumValue5MhzFactory	Implements WifiSpectrumValue for the 2.4 GHz ISM band only, with a 5 MHz spectrum resolution
Cns3::WifiSpectrumValueHelper	This abstract class defines the interface for interacting with all WifiSpectrumValue implementations
Cns3::WifiTxVector	This class mimics the TXVECTOR which is to be passed to the PHY in order to define the parameters which are to be used for a transmission
Cns3::LteEnbRrc::X2uTeidInfo
Cns3::YansWifiChannelHelper	Manage and create wifi channel objects for the yans model
Canonymous_namespace{buffer.cc}::Zeroes	Zero-filled buffer
►CLink
Cvisualizer.core.WiredLink
►CPARENT
Cns3::SimpleRefCount< T, PARENT, DELETER >	A template-based reference counting class
►CPyVizObject
Cvisualizer.core.Channel
Cvisualizer.core.Node