Every class exported by the ns3 library is enclosed in the ns3 namespace. More...
Namespaces | |
addressUtils | |
anonymous_namespace{pyviz.cc} | |
anonymous_namespace{visual-simulator-impl.cc} | |
anonymous_namespace{wifi-information-element-vector.cc} | |
aodv | |
CommandLineHelper | |
Helpers for CommandLine to specialize on bool. | |
Config | |
Configuration of simulation parameters and tracing. | |
dot11s | |
dsdv | |
dsr | |
FatalImpl | |
flame | |
Hash | |
Hash function implementations. | |
int64x64 | |
internal | |
ofi | |
olsr | |
SystemPath | |
Encapsulate OS-specific functions to manipulate file and directory paths. | |
Classes | |
class | A2A4RsrqHandoverAlgorithm |
Handover algorithm implementation based on RSRQ measurements, Event A2 and Event A4. More... | |
class | A3RsrpHandoverAlgorithm |
Implementation of the strongest cell handover algorithm, based on RSRP measurements and Event A3. More... | |
class | AarfcdWifiManager |
an implementation of the AARF-CD algorithmThis algorithm was first described in "Efficient Collision Detection for Auto Rate Fallback Algorithm". More... | |
struct | AarfcdWifiRemoteStation |
hold per-remote-station state for AARF-CD Wifi manager. More... | |
class | AarfWifiManager |
AARF Rate control algorithmThis class implements the AARF rate control algorithm which was initially described in IEEE 802.11 Rate Adaptation: A Practical Approach, by M. More... | |
struct | AarfWifiRemoteStation |
hold per-remote-station state for AARF Wifi manager. More... | |
class | AccessorHelper |
struct | AccessorTrait |
class | AcousticModemEnergyModel |
WHOI micro-modem energy model. More... | |
class | AcousticModemEnergyModelHelper |
Assign AcousticModemEnergyModel to uan devices. More... | |
class | Address |
a polymophic address class More... | |
class | AddressValue |
hold objects of type ns3::Address More... | |
class | AdhocAlohaNoackIdealPhyHelper |
create the AlohaNoackNetDevice More... | |
class | AdhocWifiMac |
struct | AllocationRetentionPriority |
3GPP 23.203 Section 6.1.7.3 Allocation and Retention Priority characteristics More... | |
class | AlohaNoackMacHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | AlohaNoackNetDevice |
This devices implements the following features: More... | |
class | AmrrWifiManager |
AMRR Rate control algorithmThis class implements the AMRR rate control algorithm which was initially described in IEEE 802.11 Rate Adaptation: A Practical Approach, by M. More... | |
struct | AmrrWifiRemoteStation |
hold per-remote-station state for AMRR Wifi manager. More... | |
class | AmsduSubframeHeader |
Doxygen introspection did not find any typical Config paths. More... | |
struct | Angles |
struct holding the azimuth and inclination angles of spherical coordinates. More... | |
class | AnimationInterface |
Interface to network animator. More... | |
class | AnimByteTag |
Byte tag using by Anim to uniquely identify packets. More... | |
class | AnimPacketInfo |
AnimPacketInfo helper class. More... | |
class | AnimRxInfo |
AnimRxInfo helper class. More... | |
class | AntennaModel |
interface for antenna radiation pattern models More... | |
class | AodvHelper |
Helper class that adds AODV routing to nodes. More... | |
class | Application |
The base class for all ns3 applications. More... | |
class | ApplicationContainer |
holds a vector of ns3::Application pointers. More... | |
class | ApplicationPacketProbe |
Probe to translate from a TraceSource to two more easily parsed TraceSources. More... | |
class | ApWifiMac |
Wi-Fi AP state machineHandle association, dis-association and authentication, of STAs within an infrastructure BSS. More... | |
class | ArfWifiManager |
ARF Rate control algorithm. More... | |
struct | ArfWifiRemoteStation |
hold per-remote-station state for ARF Wifi manager. More... | |
class | ArpCache |
An ARP cache. More... | |
class | ArpHeader |
The packet header for an ARP packet. More... | |
class | ArpL3Protocol |
An implementation of the ARP protocol. More... | |
class | ArrayMatcher |
class | AsciiFile |
A class representing an ascii file. More... | |
class | AsciiTraceHelper |
Manage ASCII trace files for device models. More... | |
class | AsciiTraceHelperForDevice |
Base class providing common user-level ascii trace operations for helpers representing net devices. More... | |
class | AsciiTraceHelperForIpv4 |
Base class providing common user-level ascii trace operations for helpers representing IPv4 protocols . More... | |
class | AsciiTraceHelperForIpv6 |
Base class providing common user-level ascii trace operations for helpers representing IPv6 protocols . More... | |
class | Asn1Header |
This class has the purpose to encode Information Elements according to ASN.1 syntax, as defined in ITU-T X-691. More... | |
class | AthstatsHelper |
create AthstatsWifiTraceSink instances and connect them to wifi devices More... | |
class | AthstatsWifiTraceSink |
trace sink for wifi device that mimics madwifi's athstats tool. More... | |
class | AttributeAccessor |
allow setting and getting the value of an attribute. More... | |
class | AttributeChecker |
Represent the type of an attribute. More... | |
class | AttributeConstructionList |
class | AttributeDefaultIterator |
class | AttributeIterator |
This class is used internally by ConfigStore and GtkConfigStore. More... | |
class | AttributeValue |
Hold a value for an Attribute. More... | |
class | Average |
Simple average, min, max and std. More... | |
class | Backoff |
The backoff class is used for calculating backoff times when many net devices can write to the same channel. More... | |
struct | BandInfo |
The building block of a SpectrumModel. More... | |
class | BandwidthManager |
This class manage the bandwidth request and grant mechanism. More... | |
class | BandwidthRequestHeader |
this class implements the bandwidth-request mac Header as described by IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems 6.3.2.1.2 Bandwidth request header, page 38 More... | |
struct | Bar |
Block Ack Request. More... | |
class | BaseStationNetDevice |
class | BasicEnergySource |
BasicEnergySource decreases/increases remaining energy stored in itself in linearly. More... | |
class | BasicEnergySourceHelper |
Creates a BasicEnergySource object. More... | |
class | BinaryErrorModel |
class | BinaryErrorSixlowModel |
class | BlockAckAgreement |
Maintains information for a block ack agreement. More... | |
class | BlockAckCache |
class | BlockAckManager |
Manages all block ack agreements for an originator station. More... | |
class | BooleanProbe |
This class is designed to probe an underlying ns3 TraceSource exporting a bool. More... | |
class | BooleanValue |
Hold a bool native type. More... | |
struct | BoundCallbackArgument |
class | BoundFunctorCallbackImpl |
CallbackImpl for functors with first argument bound at construction. More... | |
class | Box |
a 3d box More... | |
class | BoxValue |
hold objects of type ns3::Box More... | |
class | BridgeChannel |
Virtual channel implementation for bridges (BridgeNetDevice). More... | |
class | BridgeHelper |
Add capability to bridge multiple LAN segments (IEEE 802.1D bridging) More... | |
class | BridgeNetDevice |
a virtual net device that bridges multiple LAN segments More... | |
class | BriteTopologyHelper |
Interface with BRITE, the Boston university Representative Internet Topology gEnerator. More... | |
class | BSLinkManager |
class | BsrLteControlMessage |
The uplink BsrLteControlMessage defines the specific extension of the CE element for reporting the buffer status report. More... | |
class | BSScheduler |
class | BSSchedulerRtps |
This class implements a simple downlink scheduler for rtPS flows. More... | |
class | BSSchedulerSimple |
Doxygen introspection did not find any typical Config paths. More... | |
class | BsServiceFlowManager |
class | Buffer |
automatically resized byte buffer More... | |
class | BufferSizeLevelBsr |
struct | BuildBroadcastListElement_s |
See section 4.3.11 buildBroadcastListElement. More... | |
struct | BuildDataListElement_s |
See section 4.3.8 builDataListElement. More... | |
class | Building |
a 3d building block More... | |
class | BuildingContainer |
keep track of a set of building pointers. More... | |
class | BuildingList |
class | BuildingListPriv |
private implementation detail of the BuildingList API. More... | |
class | BuildingsHelper |
class | BuildingsPropagationLossModel |
This model provides means for simulating the following propagation phenomena in the presence of buildings: More... | |
struct | BuildRarListElement_s |
See section 4.3.10 buildRARListElement. More... | |
class | BulkSendApplication |
Send as much traffic as possible, trying to fill the bandwidth. More... | |
class | BulkSendHelper |
A helper to make it easier to instantiate an ns3::BulkSendApplication on a set of nodes. More... | |
class | BurstErrorModel |
Determine which bursts of packets are errored corresponding to an underlying distribution, burst rate, and burst size. More... | |
class | BurstProfileManager |
struct | BwPart_s |
See section 4.3.28 bwPart. More... | |
class | ByteTagIterator |
Iterator over the set of byte tags in a packet. More... | |
class | ByteTagList |
keep track of the byte tags stored in a packet. More... | |
struct | ByteTagListData |
Internal representation of the byte tags stored in a packet. More... | |
class | ByteTagListDataFreeList |
Container class for struct ByteTagListData. More... | |
class | CalendarScheduler |
a calendar queue event scheduler More... | |
class | Callback |
Callback template class. More... | |
class | CallbackBase |
Base class for Callback class. More... | |
class | CallbackImpl |
The unqualified CallbackImpl class. More... | |
class | CallbackImpl< R, empty, empty, empty, empty, empty, empty, empty, empty, empty > |
CallbackImpl classes with varying numbers of argument types. More... | |
class | CallbackImpl< R, T1, empty, empty, empty, empty, empty, empty, empty, empty > |
CallbackImpl class with one argument. More... | |
class | CallbackImpl< R, T1, T2, empty, empty, empty, empty, empty, empty, empty > |
CallbackImpl class with two arguments. More... | |
class | CallbackImpl< R, T1, T2, T3, empty, empty, empty, empty, empty, empty > |
CallbackImpl class with three arguments. More... | |
class | CallbackImpl< R, T1, T2, T3, T4, empty, empty, empty, empty, empty > |
CallbackImpl class with four arguments. More... | |
class | CallbackImpl< R, T1, T2, T3, T4, T5, empty, empty, empty, empty > |
CallbackImpl class with five arguments. More... | |
class | CallbackImpl< R, T1, T2, T3, T4, T5, T6, empty, empty, empty > |
CallbackImpl class with six arguments. More... | |
class | CallbackImpl< R, T1, T2, T3, T4, T5, T6, T7, empty, empty > |
CallbackImpl class with seven arguments. More... | |
class | CallbackImpl< R, T1, T2, T3, T4, T5, T6, T7, T8, empty > |
CallbackImpl class with eight arguments. More... | |
class | CallbackImplBase |
Abstract base class for CallbackImpl Provides reference counting and equality test. More... | |
struct | CallbackTraits |
Trait class to convert a pointer into a reference, used by MemPtrCallBackImpl. More... | |
struct | CallbackTraits< Ptr< T > > |
struct | CallbackTraits< T * > |
Trait class to convert a pointer into a reference, used by MemPtrCallBackImpl. More... | |
class | CallbackValue |
AttributeValue form of a Callback. More... | |
class | CandidateQueue |
A Candidate Queue used in static routing. More... | |
class | CapabilityInformation |
Capability information. More... | |
class | CaraWifiManager |
implement the CARA rate control algorithmImplement the CARA algorithm from: J. More... | |
struct | CaraWifiRemoteStation |
hold per-remote-station state for CARA Wifi manager. More... | |
class | Channel |
Abstract Channel Base Class. More... | |
class | ChannelList |
the list of simulation channels. More... | |
class | ChannelListPriv |
private implementation detail of the ChannelList API. More... | |
class | Chunk |
abstract base class for ns3::Header and ns3::Trailer More... | |
class | Cid |
class | CidFactory |
This class is used exclusively by the BS to allocate CIDs to new connections. More... | |
class | ClassificationRuleVectorTlvValue |
this class implements the classifier descriptor as a tlv vector More... | |
class | CommandLine |
Parse command-line arguments. More... | |
class | ConfigImpl |
class | ConfigStore |
Doxygen introspection did not find any typical Config paths. More... | |
class | ConnectionManager |
The same connection manager class serves both for BS and SS though some functions are exclusive to only one of them. More... | |
class | ConstantAccelerationMobilityModel |
Mobility model for which the current acceleration does not change once it has been set and until it is set again explicitely to a new value. More... | |
class | ConstantPositionMobilityModel |
Mobility model for which the current position does not change once it has been set and until it is set again explicitely to a new value. More... | |
class | ConstantRandomVariable |
The Random Number Generator (RNG) that returns a constant. More... | |
class | ConstantRateWifiManager |
use constant rates for data and control transmissions More... | |
class | ConstantSpectrumPropagationLossModel |
Doxygen introspection did not find any typical Config paths. More... | |
class | ConstantSpeedPropagationDelayModel |
the propagation speed is constant More... | |
class | ConstantVariable |
A random variable that returns a constantClass ConstantVariable defines a random number generator that returns the same value every sample. More... | |
class | ConstantVariableImpl |
class | ConstantVelocityHelper |
Utility class used to move node with constant velocity. More... | |
class | ConstantVelocityMobilityModel |
Mobility model for which the current speed does not change once it has been set and until it is set again explicitely to a new value. More... | |
class | CosineAntennaModel |
Cosine Antenna Model. More... | |
class | Cost231PropagationLossModel |
The COST-Hata-Model is the most often cited of the COST 231 models. More... | |
class | CounterCalculator |
Template class CounterCalculator. More... | |
class | CqaFfMacScheduler |
Implements the SCHED SAP and CSCHED SAP for the Channel and QoS Aware Scheduler. More... | |
class | CqaSchedulerMemberCschedSapProvider |
class | CqaSchedulerMemberSchedSapProvider |
struct | CqasFlowPerf_t |
struct | CqiConfig_s |
See section 4.3.19 cqiConfig. More... | |
struct | CqiListElement_s |
See section 4.3.24 cqiListElement. More... | |
class | CriticalSection |
A class which provides a simple way to implement a Critical Section. More... | |
class | CsmaChannel |
Csma Channel. More... | |
class | CsmaDeviceRec |
CsmaNetDevice Record. More... | |
class | CsmaHelper |
build a set of CsmaNetDevice objects More... | |
class | CsmaNetDevice |
A Device for a Csma Network Link. More... | |
class | CsmaStarHelper |
A helper to make it easier to create a star topology with Csma links. More... | |
class | CsParameters |
class | CsParamVectorTlvValue |
this class implements the convergence sub-layer descriptor as a tlv vector More... | |
class | CtrlBAckRequestHeader |
Headers for Block ack request. More... | |
class | CtrlBAckResponseHeader |
Headers for Block ack response. More... | |
class | DataCalculator |
Calculates data during a simulation. More... | |
class | DataCollectionObject |
Base class for data collection framework objects. More... | |
class | DataCollector |
Collects data. More... | |
class | DataOutputCallback |
Callback class for the DataOutput classes. More... | |
class | DataOutputInterface |
Abstract Data Output Interface class s. More... | |
class | DataRate |
Class for representing data rates. More... | |
class | DataRateValue |
hold objects of type ns3::DataRate More... | |
class | DcaTxop |
handle packet fragmentation and retransmissions. More... | |
class | Dcd |
Doxygen introspection did not find any typical Config paths. More... | |
class | DcdChannelEncodings |
This class implements the DCD channel encodings as described by "IEEE Standard for
Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems" 11.4.1 DCD channel encodings, page 659. More... | |
class | Dcf |
Doxygen introspection did not find any typical Config paths. More... | |
class | DcfManager |
Manage a set of ns3::DcfStateHandle a set of independent ns3::DcfState, each of which represents a single DCF within a MAC stack. More... | |
class | DcfState |
keep track of the state needed for a single DCF function. More... | |
struct | DefaultDeleter |
a template used to delete objects by the *RefCount<> templates when the last reference to an object they manage disappears. More... | |
class | DefaultSimulatorImpl |
Doxygen introspection did not find any typical Config paths. More... | |
class | DelayJitterEstimation |
quick and dirty delay and jitter estimation More... | |
class | DelayJitterEstimationTimestampTag |
Tag to perform Delay and Jitter estimations. More... | |
struct | DestinationPoint |
Keeps last movement schedule. More... | |
class | DeterministicRandomVariable |
The Random Number Generator (RNG) that returns a predetermined sequence. More... | |
class | DeterministicVariable |
a non-random variableDefines a random variable that has a specified, predetermined sequence. More... | |
class | DeterministicVariableImpl |
class | DeviceEnergyModel |
Base class for device energy models. More... | |
class | DeviceEnergyModelContainer |
Holds a vector of ns3::DeviceEnergyModel pointers. More... | |
class | DeviceEnergyModelHelper |
Creates DeviceEnergyModel objects. More... | |
class | DeviceNameTag |
This class implements a tag that carries the ns3 device name from where a packet is coming. More... | |
class | DistributedSimulatorImpl |
Distributed simulator implementation using lookahead. More... | |
class | DlCqiLteControlMessage |
The downlink CqiLteControlMessage defines an ideal list of feedback about the channel quality sent by the UE to the eNodeB. More... | |
struct | DlDciListElement_s |
See section 4.3.1 dlDciListElement. More... | |
class | DlDciLteControlMessage |
The Downlink Data Control Indicator messages defines the RB allocation for the users in the downlink. More... | |
class | DlFramePrefixIe |
This class implements the DL Frame Prefix IE as described by IEEE-802.16 standard. More... | |
class | DlHarqFeedbackLteControlMessage |
The downlink DlHarqFeedbackLteControlMessage defines the specific messages for transmitting the DL HARQ feedback through PUCCH. More... | |
struct | DlInfoListElement_s |
See section 4.3.23 dlInfoListElement. More... | |
class | DlMap |
Doxygen introspection did not find any typical Config paths. More... | |
class | Dot11sStack |
Helper class to allow easy installation of 802.11s stack. More... | |
class | DoubleProbe |
This class is designed to probe an underlying ns3 TraceSource exporting a double. More... | |
class | DoubleValue |
Hold a floating point type. More... | |
class | DownlinkLteGlobalPathlossDatabase |
class | DrbActivator |
class | DropTailQueue |
A FIFO packet queue that drops tail-end packets on overflow. More... | |
struct | DrxConfig_s |
See section 4.3.16 drxConfig. More... | |
class | DsaAck |
Doxygen introspection did not find any typical Config paths. More... | |
class | DsaReq |
Doxygen introspection did not find any typical Config paths. More... | |
class | DsaRsp |
Doxygen introspection did not find any typical Config paths. More... | |
class | DsdvHelper |
Helper class that adds DSDV routing to nodes. More... | |
class | DsrHelper |
class | DsrMainHelper |
Helper class that adds DSR routing to nodes. More... | |
class | DsrRoutingHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | DsssErrorRateModel |
an implementation of DSSS error rate modelThe 802.11b modulations: More... | |
class | EdcaTxopN |
This queue contains packets for a particular access class. More... | |
class | EmpiricalRandomVariable |
The Random Number Generator (RNG) that has a specified empirical distribution. More... | |
class | EmpiricalVariable |
EmpiricalVariable distribution random varDefines a random variable that has a specified, empirical distribution. More... | |
class | EmpiricalVariableImpl |
class | empty |
make Callback use a separate empty type More... | |
class | EmptyAttributeValue |
A class for an empty attribute value. More... | |
class | EmuFdNetDeviceHelper |
build a set of FdNetDevice objects attached to a physical network interface More... | |
class | EmuHelper |
build a set of EmuNetDevice objects More... | |
class | EmuNetDevice |
A Device for an Emu Network Link. More... | |
class | EnbMacMemberFfMacCschedSapUser |
class | EnbMacMemberFfMacSchedSapUser |
class | EnbMacMemberLteEnbCmacSapProvider |
class | EnbMacMemberLteEnbPhySapUser |
class | EnbMacMemberLteMacSapProvider |
class | EnbMemberLteEnbPhySapProvider |
class | EnbRrcMemberLteEnbCmacSapUser |
Class for forwarding CMAC SAP User functions. More... | |
class | EnergySource |
Energy source base class. More... | |
class | EnergySourceContainer |
Holds a vector of ns3::EnergySource pointers. More... | |
class | EnergySourceHelper |
Creates EnergySource objects. More... | |
class | EnumChecker |
class | EnumValue |
hold variables of type 'enum' More... | |
class | EpcEnbApplication |
This application is installed inside eNBs and provides the bridge functionality for user data plane packets between the radio interface and the S1-U interface. More... | |
class | EpcEnbS1SapProvider |
This class implements the Service Access Point (SAP) between the LteEnbRrc and the EpcEnbApplication. More... | |
class | EpcEnbS1SapUser |
This class implements the Service Access Point (SAP) between the LteEnbRrc and the EpcEnbApplication. More... | |
class | EpcHelper |
Base helper class to handle the creation of the EPC entities. More... | |
class | EpcMme |
This object implements the MME functionality. More... | |
class | EpcS11Sap |
class | EpcS11SapMme |
MME side of the S11 Service Access Point (SAP), provides the MME methods to be called when an S11 message is received by the MME. More... | |
class | EpcS11SapSgw |
SGW side of the S11 Service Access Point (SAP), provides the SGW methods to be called when an S11 message is received by the SGW. More... | |
class | EpcS1apSap |
class | EpcS1apSapEnb |
eNB side of the S1-AP Service Access Point (SAP), provides the eNB methods to be called when an S1-AP message is received by the eNB. More... | |
class | EpcS1apSapMme |
MME side of the S1-AP Service Access Point (SAP), provides the MME methods to be called when an S1-AP message is received by the MME. More... | |
class | EpcSgwPgwApplication |
This application implements the SGW/PGW functionality. More... | |
class | EpcTestRrc |
RRC stub providing a testing S1 SAP user to be used with the EpcEnbApplication. More... | |
class | EpcTft |
This class implements the EPS bearer Traffic Flow Template (TFT), which is the set of all packet filters associated with an EPS bearer. More... | |
class | EpcTftClassifier |
classifies IP packets accoding to Traffic Flow Templates (TFTs) More... | |
class | EpcUeNas |
class | EpcX2 |
This entity is installed inside an eNB and provides the functionality for the X2 interface. More... | |
class | EpcX2HandoverPreparationFailureHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | EpcX2HandoverRequestAckHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | EpcX2HandoverRequestHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | EpcX2Header |
Doxygen introspection did not find any typical Config paths. More... | |
class | EpcX2LoadInformationHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | EpcX2ResourceStatusUpdateHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | EpcX2Sap |
The X2 SAP defines the service between the X2 entity and the RRC entity. More... | |
class | EpcX2SapProvider |
These service primitives of this part of the X2 SAP are provided by the X2 entity and issued by RRC entity. More... | |
class | EpcX2SapUser |
These service primitives of this part of the X2 SAP are provided by the RRC entity and issued by the X2 entity. More... | |
class | EpcX2SnStatusTransferHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | EpcX2SpecificEpcX2SapProvider |
class | EpcX2SpecificEpcX2SapUser |
class | EpcX2UeContextReleaseHeader |
Doxygen introspection did not find any typical Config paths. More... | |
struct | EpsBearer |
This class contains the specification of EPS Bearers. More... | |
class | EpsBearerTag |
Tag used to define the RNTI and EPS bearer ID for packets interchanged between the EpcEnbApplication and the LteEnbNetDevice. More... | |
class | ErlangRandomVariable |
The Erlang distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically. More... | |
class | ErlangVariable |
Erlang Distributed Random VariableErlangVariable defines a random variable with Erlang distribution. More... | |
class | ErlangVariableImpl |
class | ErrorChannel |
A Error channel, introducing deterministic delays on even/odd packets. More... | |
class | ErrorChannelSixlow |
A Error channel, introducing deterministic delays on even/odd packets. More... | |
class | ErrorModel |
General error model that can be used to corrupt packets. More... | |
class | ErrorRateModel |
the interface for Wifi's error models More... | |
class | EthernetHeader |
Packet header for Ethernet. More... | |
class | EthernetTrailer |
Packet trailer for Ethernet. More... | |
struct | EutraChannelNumbers |
Table 5.7.3-1 "E-UTRA channel numbers" from 3GPP TS 36.101 The table was converted to C syntax doing a cut & paste from TS 36.101 and running the following filter: awk '{if ((NR % 7) == 1) printf("{"); printf ("%s",$0); if ((NR % 7) == 0) printf("},\n"); else printf(", ");}' | sed 's/ – /, /g'. More... | |
class | EutranMeasurementMapping |
Implements the E-UTRA measurement mappings defined in 3GPP TS 36.133 section 9.1 E-UTRAN measurements. More... | |
class | EventGarbageCollector |
An object that tracks scheduled events and automatically cancels them when it is destroyed. More... | |
class | EventId |
an identifier for simulation events. More... | |
class | EventImpl |
a simulation event More... | |
struct | EventMemberImplObjTraits |
struct | EventMemberImplObjTraits< Ptr< T > > |
struct | EventMemberImplObjTraits< T * > |
class | ExponentialRandomVariable |
The exponential distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically. More... | |
class | ExponentialVariable |
Exponentially Distributed random varThis class supports the creation of objects that return random numbers from a fixed exponential distribution. More... | |
class | ExponentialVariableImpl |
class | ExtendedSupportedRatesIE |
The Extended Supported Rates Information ElementThis class knows how to serialise and deserialise the Extended Supported Rates Element that holds (non-HT) rates beyond the 8 that the original Supported Rates element can carry. More... | |
class | FdBetFfMacScheduler |
Implements the SCHED SAP and CSCHED SAP for a Frequency Domain Blind Equal Throughput scheduler. More... | |
class | FdBetSchedulerMemberCschedSapProvider |
class | FdBetSchedulerMemberSchedSapProvider |
struct | fdbetsFlowPerf_t |
class | FdMtFfMacScheduler |
Implements the SCHED SAP and CSCHED SAP for a Frequency Domain Maximize Throughput scheduler. More... | |
class | FdMtSchedulerMemberCschedSapProvider |
class | FdMtSchedulerMemberSchedSapProvider |
class | FdNetDevice |
a NetDevice to read/write network traffic from/into a file descriptor. More... | |
class | FdNetDeviceFdReader |
class | FdNetDeviceHelper |
build a set of FdNetDevice objects Normally we eschew multiple inheritance, however, the classes PcapUserHelperForDevice and AsciiTraceUserHelperForDevice are treated as "mixins". More... | |
class | FdReader |
A class that asynchronously reads from a file descriptor. More... | |
class | FdTbfqFfMacScheduler |
Implements the SCHED SAP and CSCHED SAP for a Frequency Domain Token Bank Fair Queue scheduler. More... | |
class | FdTbfqSchedulerMemberCschedSapProvider |
class | FdTbfqSchedulerMemberSchedSapProvider |
struct | fdtbfqsFlowPerf_t |
Flow information. More... | |
class | FfMacCschedSapProvider |
Provides the CSCHED SAP. More... | |
class | FfMacCschedSapUser |
class | FfMacSchedSapProvider |
Provides the SCHED SAP. More... | |
class | FfMacSchedSapUser |
class | FfMacScheduler |
This abstract base class identifies the interface by means of which the helper object can plug on the MAC a scheduler implementation based on the FF MAC Sched API. More... | |
class | FileAggregator |
This aggregator sends values it receives to a file. More... | |
class | FileConfig |
class | FileHelper |
Helper class used to put data values into a file. More... | |
class | FixedRoomPositionAllocator |
Generate a random position uniformly distributed in the volume of a chosen room inside a chosen building. More... | |
class | FixedRssLossModel |
Return a constant received power level independent of the transmit power. More... | |
class | FlameStack |
Helper class used to install FLAME mesh stack (actually single protocol in this stack) More... | |
class | FlowClassifier |
Provides a method to translate raw packet data into abstract flow identifier and packet identifier parameters. More... | |
class | FlowIdTag |
Doxygen introspection did not find any typical Config paths. More... | |
class | FlowMonitor |
An object that monitors and reports back packet flows observed during a simulation. More... | |
class | FlowMonitorHelper |
Helper to enable IP flow monitoring on a set of Nodes. More... | |
class | FlowProbe |
The FlowProbe class is responsible for listening for packet events in a specific point of the simulated space, report those events to the global FlowMonitor, and collect its own flow statistics regarding only the packets that pass through that probe. More... | |
class | FragmentationSubheader |
this class implements the fragmentation sub-header as described by IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems 6.3.2.2.1 Fragmentation subheader, page 39 More... | |
class | FriisPropagationLossModel |
a Friis propagation loss model More... | |
class | FriisSpectrumPropagationLossModel |
Doxygen introspection did not find any typical Config paths. More... | |
class | FunctorCallbackImpl |
CallbackImpl with functors. More... | |
class | GammaRandomVariable |
The gamma distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically. More... | |
class | GammaVariable |
Gamma Distributed Random VariableGammaVariable defines a random variable with gamma distribution. More... | |
class | GammaVariableImpl |
class | GaussMarkovMobilityModel |
Gauss-Markov mobility model. More... | |
struct | GbrQosInformation |
3GPP TS 36.143 9.2.1.18 GBR QoS Information More... | |
class | GenericMacHeader |
this class implements the Generic mac Header as described by IEEE Standard for Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems 6.3.2.1.1 Generic MAC header, page 36 More... | |
class | GlobalRouteManager |
A global global router. More... | |
class | GlobalRouteManagerImpl |
A global router implementation. More... | |
class | GlobalRouteManagerLSDB |
The Link State DataBase (LSDB) of the Global Route Manager. More... | |
class | GlobalRouter |
An interface aggregated to a node to provide global routing info. More... | |
class | GlobalRoutingLinkRecord |
A single link record for a link state advertisement. More... | |
class | GlobalRoutingLSA |
a Link State Advertisement (LSA) for a router, used in global routing. More... | |
class | GlobalValue |
hold a so-called 'global value'. More... | |
class | Gnuplot |
a simple class to generate gnuplot-ready plotting commands from a set of datasets. More... | |
class | Gnuplot2dDataset |
Class to represent a 2D points plot. More... | |
class | Gnuplot2dFunction |
Class to represent a 2D function expression plot. More... | |
class | Gnuplot3dDataset |
Class to represent a 3D points plot. More... | |
class | Gnuplot3dFunction |
Class to represent a 3D function expression plot. More... | |
class | GnuplotAggregator |
This aggregator produces output used to make gnuplot plots. More... | |
class | GnuplotCollection |
a simple class to group together multiple gnuplots into one file, e.g. More... | |
class | GnuplotDataset |
Abstract class to store a plot line to be used by ns3::Gnuplot. More... | |
class | GnuplotHelper |
Helper class used to make gnuplot plots. More... | |
class | GrantedTimeWindowMpiInterface |
Interface between ns-3 and MPI. More... | |
class | GrantManagementSubheader |
Doxygen introspection did not find any typical Config paths. More... | |
class | GridBuildingAllocator |
Allocate buildings on a rectangular 2d grid. More... | |
class | GridPositionAllocator |
Allocate positions on a rectangular 2d grid. More... | |
class | GtkConfigStore |
A class that provides a GTK-based front end to ns3::ConfigStore. More... | |
class | GtpuHeader |
Implementation of the GTPv1-U Release 10 as per 3Gpp TS 29.281 document. More... | |
class | HalfDuplexIdealPhy |
This PHY layer implementation realizes an ideal OFDM PHY which transmits half-duplex (i.e., it can either receive or transmit at a given time). More... | |
struct | HalfDuplexIdealPhySignalParameters |
Signal parameters for HalfDuplexIdealPhy. More... | |
class | HandoverPreparationInfoHeader |
This class manages the serialization/deserialization of HandoverPreparationInfo IE. More... | |
struct | HarqProcessInfoElement_t |
class | Hasher |
Generic Hash function interface. More... | |
class | Header |
Protocol header serialization and deserialization. More... | |
class | HeapScheduler |
a binary heap event scheduler More... | |
class | HierarchicalMobilityModel |
Hierarchical mobility model. More... | |
class | HigherDataTxVectorTag |
This tag will be used to support higher layer control data rate and tx power level. More... | |
struct | HigherLayerSelected_s |
See section 4.3.27 higherLayerSelected. More... | |
class | HighLatencyCtsToSelfTxVectorTag |
class | HighLatencyDataTxVectorTag |
class | HighLatencyRtsTxVectorTag |
class | Histogram |
Class used to store data and make an histogram of the data frequency. More... | |
class | HtCapabilities |
The Ht Capabilities Information ElementThis class knows how to serialise and deserialise the Ht Capabilities Information Element. More... | |
class | HtWifiMacHelper |
create HT-enabled MAC layers for a ns3::WifiNetDevice. More... | |
class | HybridBuildingsPropagationLossModel |
The HybridBuildingsPropagationModel is a compound of different models able to evaluate the pathloss from 200 to 2600 MHz, in different environments and with buildings (i.e., indoor and outdoor communications). More... | |
class | Icmpv4DestinationUnreachable |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv4Echo |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv4Header |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv4L4Protocol |
class | Icmpv4TimeExceeded |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6DestinationUnreachable |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6Echo |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6Header |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6L4Protocol |
An implementation of the ICMPv6 protocol. More... | |
class | Icmpv6NA |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6NS |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6OptionHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6OptionLinkLayerAddress |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6OptionMtu |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6OptionPrefixInformation |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6OptionRedirected |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6ParameterError |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6RA |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6Redirection |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6RS |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6TimeExceeded |
Doxygen introspection did not find any typical Config paths. More... | |
class | Icmpv6TooBig |
Doxygen introspection did not find any typical Config paths. More... | |
class | IdealHandoverCommandHeader |
class | IdealHandoverPreparationInfoHeader |
class | IdealWifiManager |
Ideal rate control algorithmThis class implements an 'ideal' rate control algorithm similar to RBAR in spirit (see A rate-adaptive MAC protocol for multihop wireless networks by G. More... | |
struct | IdealWifiRemoteStation |
hold per-remote-station state for Ideal Wifi manager. More... | |
class | IeMeshIdValue |
hold objects of type ns3::IeMeshId More... | |
class | IidManager |
TypeId information manager. More... | |
struct | ImsiLcidPair_t |
struct | Indent |
class | Inet6SocketAddress |
An Inet6 address class. More... | |
class | InetSocketAddress |
an Inet address class More... | |
class | InetTopologyReader |
Topology file reader (Inet-format type). More... | |
class | int64x64_t |
High precision numerical type, implementing Q64.64 fixed precision. More... | |
class | IntegerValue |
Hold a signed integer type. More... | |
class | IntEmpiricalVariable |
Integer-based empirical distributionDefines an empirical distribution where all values are integers. More... | |
class | IntEmpiricalVariableImpl |
class | InterferenceHelper |
handles interference calculations More... | |
class | InternetStackHelper |
aggregate IP/TCP/UDP functionality to existing Nodes. More... | |
struct | IntToType |
This trivial template is extremely useful, as explained in "Modern C++ Design", p29, section 2.4, "Mapping Integral Constants to Types". More... | |
class | IpcsClassifier |
class | IpcsClassifierRecord |
class | IpL4Protocol |
L4 Protocol abstract base class. More... | |
class | Ipv4 |
Access to the Ipv4 forwarding table, interfaces, and configuration. More... | |
class | Ipv4Address |
Ipv4 addresses are stored in host order in this class. More... | |
class | Ipv4AddressGenerator |
This generator assigns addresses sequentially from a provided network address; used in topology code. More... | |
class | Ipv4AddressGeneratorImpl |
Implementation class of Ipv4AddressGenerator This generator assigns addresses sequentially from a provided network address; used in topology code. It also keeps track of all addresses assigned to perform duplicate detection. More... | |
class | Ipv4AddressHash |
Class providing an hash for IPv4 addresses. More... | |
class | Ipv4AddressHelper |
A helper class to make life easier while doing simple IPv4 address assignment in scripts. More... | |
class | Ipv4AddressTlvValue |
class | Ipv4AddressValue |
hold objects of type ns3::Ipv4Address More... | |
class | Ipv4ClickRouting |
Class to allow a node to use Click for external routing. More... | |
class | Ipv4EndPoint |
A representation of an internet endpoint/connection. More... | |
class | Ipv4EndPointDemux |
Demultiplexes packets to various transport layer endpoints. More... | |
class | Ipv4FlowClassifier |
Classifies packets by looking at their IP and TCP/UDP headers. More... | |
class | Ipv4FlowProbe |
Class that monitors flows at the IPv4 layer of a Node. More... | |
class | Ipv4FlowProbeTag |
Tag used to allow a fast identification of the packet. More... | |
class | Ipv4GlobalRouting |
Global routing protocol for IP version 4 stacks. More... | |
class | Ipv4GlobalRoutingHelper |
Helper class that adds ns3::Ipv4GlobalRouting objects. More... | |
class | Ipv4Header |
Packet header for IPv4. More... | |
class | Ipv4Interface |
The IPv4 representation of a network interface. More... | |
class | Ipv4InterfaceAddress |
a class to store IPv4 address information on an interface More... | |
class | Ipv4InterfaceContainer |
holds a vector of std::pair of Ptr<Ipv4> and interface index. More... | |
class | Ipv4L3ClickProtocol |
Implement the Ipv4 layer specifically for Click nodes to allow a clean integration of Click. More... | |
class | Ipv4L3Protocol |
Implement the Ipv4 layer. More... | |
class | Ipv4ListRouting |
This class is a specialization of Ipv4RoutingProtocol that allows other instances of Ipv4RoutingProtocol to be inserted in a prioritized list. More... | |
class | Ipv4ListRoutingHelper |
Helper class that adds ns3::Ipv4ListRouting objects. More... | |
class | Ipv4Mask |
a class to represent an Ipv4 address mask More... | |
class | Ipv4MaskValue |
hold objects of type ns3::Ipv4Mask More... | |
class | Ipv4MulticastRoute |
Ipv4 multicast route cache entry (similar to Linux struct mfc_cache) More... | |
class | Ipv4MulticastRoutingTableEntry |
A record of an IPv4 multicast route for Ipv4GlobalRouting and Ipv4StaticRouting. More... | |
class | Ipv4NixVectorHelper |
Helper class that adds Nix-vector routing to nodes. More... | |
class | Ipv4NixVectorRouting |
Nix-vector routing protocol. More... | |
class | Ipv4PacketInfoTag |
This class implements Linux struct pktinfo in order to deliver ancillary information to the socket interface. More... | |
class | Ipv4PacketProbe |
This class is designed to probe an underlying ns3 TraceSource exporting a packet, an IPv4 object, and an interface. More... | |
class | Ipv4RawSocketFactory |
API to create RAW socket instances. More... | |
class | Ipv4RawSocketFactoryImpl |
Implementation of IPv4 raw socket factory. More... | |
class | Ipv4RawSocketImpl |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv4Route |
Ipv4 route cache entry (similar to Linux struct rtable) More... | |
struct | Ipv4RoutePathElement |
struct | Ipv4RouteTrackElement |
class | Ipv4RoutingHelper |
a factory to create ns3::Ipv4RoutingProtocol objects More... | |
class | Ipv4RoutingProtocol |
Abstract base class for IPv4 routing protocols. More... | |
class | Ipv4RoutingTableEntry |
A record of an IPv4 routing table entry for Ipv4GlobalRouting and Ipv4StaticRouting. More... | |
class | Ipv4StaticRouting |
Static routing protocol for IP version 4 stacks. More... | |
class | Ipv4StaticRoutingHelper |
Helper class that adds ns3::Ipv4StaticRouting objects. More... | |
class | Ipv6 |
Access to the IPv6 forwarding table, interfaces, and configuration. More... | |
class | Ipv6Address |
Describes an IPv6 address. More... | |
class | Ipv6AddressGenerator |
This generator assigns addresses sequentially from a provided network address; used in topology code. More... | |
class | Ipv6AddressGeneratorImpl |
Implementation class of Ipv6AddressGenerator This generator assigns addresses sequentially from a provided network address; used in topology code. It also keeps track of all addresses assigned to perform duplicate detection. More... | |
class | Ipv6AddressHash |
Hash function class for IPv6 addresses. More... | |
class | Ipv6AddressHelper |
Helper class to auto-assign global IPv6 unicast addresses. More... | |
class | Ipv6AddressValue |
Hold objects of type ns3::Ipv6Address. More... | |
class | Ipv6AutoconfiguredPrefix |
Router prefix information. More... | |
class | Ipv6EndPoint |
A representation of an internet IPv6 endpoint/connection. More... | |
class | Ipv6EndPointDemux |
Demultiplexor for end points. More... | |
class | Ipv6Extension |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionAH |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionAHHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionDemux |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionDestination |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionDestinationHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionESP |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionESPHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionFragment |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionFragmentHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionHopByHop |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionHopByHopHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionLooseRouting |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionLooseRoutingHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionRouting |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionRoutingDemux |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ExtensionRoutingHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6FlowClassifier |
Classifies packets by looking at their IP and TCP/UDP headers. More... | |
class | Ipv6FlowProbe |
Class that monitors flows at the IPv6 layer of a Node. More... | |
class | Ipv6FlowProbeTag |
Tag used to allow a fast identification of the packet. More... | |
class | Ipv6Header |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6Interface |
The IPv6 representation of a network interface. More... | |
class | Ipv6InterfaceAddress |
IPv6 address associated with an interface. More... | |
class | Ipv6InterfaceContainer |
Keep track of a set of IPv6 interfaces. More... | |
class | Ipv6L3Protocol |
IPv6 layer implementation. More... | |
class | Ipv6ListRouting |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6ListRoutingHelper |
Helper class that adds ns3::Ipv6ListRouting objects. More... | |
class | Ipv6MulticastRoute |
IPv6 multicast route entry. More... | |
class | Ipv6MulticastRoutingTableEntry |
A record of an IPv6 multicast route. More... | |
class | Ipv6Option |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6OptionDemux |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6OptionHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6OptionJumbogram |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6OptionJumbogramHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6OptionPad1 |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6OptionPad1Header |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6OptionPadn |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6OptionPadnHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6OptionRouterAlert |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6OptionRouterAlertHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6PacketInfoTag |
This class implements a tag that carries socket ancillary data to the socket interface. More... | |
class | Ipv6PacketProbe |
This class is designed to probe an underlying ns3 TraceSource exporting a packet, an IPv6 object, and an interface. More... | |
class | Ipv6PmtuCache |
This class implements the Path MTU cache, as defined by RFC 1981. More... | |
class | Ipv6Prefix |
Describes an IPv6 prefix. More... | |
class | Ipv6PrefixValue |
Hold objects of type ns3::Ipv6Prefix. More... | |
class | Ipv6RawSocketFactory |
API to create IPv6 RAW socket instances. More... | |
class | Ipv6RawSocketFactoryImpl |
Implementation of IPv6 raw socket factory. More... | |
class | Ipv6RawSocketImpl |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6Route |
IPv6 route cache entry. More... | |
class | Ipv6RoutingHelper |
A factory to create ns3::Ipv6RoutingProtocol objects. More... | |
class | Ipv6RoutingProtocol |
Abstract base class for Ipv6 routing protocols. More... | |
class | Ipv6RoutingTableEntry |
A record of an IPv6 route. More... | |
class | Ipv6StaticRouting |
Doxygen introspection did not find any typical Config paths. More... | |
class | Ipv6StaticRoutingHelper |
Helper class that adds ns3::Ipv6StaticRouting objects. More... | |
class | IsotropicAntennaModel |
Isotropic antenna model. More... | |
class | ItuR1238PropagationLossModel |
This class implements the ITU-R 1238 propagation loss model. More... | |
class | ItuR1411LosPropagationLossModel |
the ITU-R 1411 LOS propagation model More... | |
class | ItuR1411NlosOverRooftopPropagationLossModel |
the ITU-R 1411 NLOS over rooftop propagation model More... | |
class | JakesProcess |
Implementation for a single path Stationary Jakes propagation loss model. More... | |
class | JakesPropagationLossModel |
a jakes narrowband propagation model. More... | |
class | Kun2600MhzPropagationLossModel |
Empirical propagation model for the 2.6 GHz frequency. More... | |
class | LbtsMessage |
Structure used for all-reduce LBTS computation. More... | |
class | LiIonEnergySource |
Model a generic Lithium Ion Battery basing on [1][2]. More... | |
struct | LinkPairCompare |
struct | LinkProperties |
class | ListErrorModel |
Provide a list of Packet uids to corrupt. More... | |
class | ListPositionAllocator |
Allocate positions from a deterministic list specified by the user. More... | |
class | ListScheduler |
a std::list event scheduler More... | |
class | LlcSnapHeader |
Header for the LLC/SNAP encapsulation. More... | |
class | LogComponent |
A single log component configuration. More... | |
class | LogDistancePropagationLossModel |
a log distance propagation model. More... | |
struct | LogicalChannelConfigListElement_s |
See section 4.3.4 logicalChannelConfigListElement. More... | |
class | LogNormalRandomVariable |
The log-normal distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically. More... | |
class | LogNormalVariable |
Log-normal Distributed random varLogNormalVariable defines a random variable with log-normal distribution. More... | |
class | LogNormalVariableImpl |
class | LoopbackNetDevice |
Virtual network interface that loops back any data sent to it to be immediately received on the same interface. More... | |
class | LowDcfListener |
Listener for NAV events. More... | |
class | LrWpanCsmaCa |
This class is a helper for the LrWpanMac to manage the Csma/CA state machine according to IEEE 802.15.4-2006, section 7.5.1.4. More... | |
struct | LrWpanEdPower |
Helper structure to manage the power measurement during ED. More... | |
class | LrWpanErrorModel |
Model the error rate for IEEE 802.15.4 2.4 GHz AWGN channel for OQPSK the model description can be found in IEEE Std 802.15.4-2006, section E.4.1.7. More... | |
class | LrWpanHelper |
helps to manage and create IEEE 802.15.4 NetDevice objects More... | |
class | LrWpanInterferenceHelper |
This class provides helper functions for LrWpan interference handling. More... | |
class | LrWpanLqiTag |
Doxygen introspection did not find any typical Config paths. More... | |
class | LrWpanMac |
Class that implements the LR-WPAN Mac state machine. More... | |
class | LrWpanMacHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | LrWpanMacTrailer |
Represent the Mac Trailer with the Frame Check Sequence field. More... | |
class | LrWpanNetDevice |
Network layer to device interface. More... | |
class | LrWpanPhy |
Make LrWpanPhy a SpectrumPhy so we can enable the eventual modeling of device interference. More... | |
struct | LrWpanPhyDataAndSymbolRates |
IEEE802.15.4-2006 Table 1 and 2 in section 6.1.1 and 6.1.2. More... | |
struct | LrWpanPhyPibAttributes |
IEEE802.15.4-2006 PHY PIB Attributes Table 23 in section 6.4.2. More... | |
struct | LrWpanPhyPpduHeaderSymbolNumber |
IEEE802.15.4-2006 Figure 16, Table 19 and 20 in section 6.3 this data structure provides number of symbols for the PPDU headers: SHR and PHR. More... | |
class | LrWpanSpectrumModelInitializer |
struct | LrWpanSpectrumSignalParameters |
Signal parameters for LrWpan. More... | |
class | LrWpanSpectrumValueHelper |
This class defines all functions to create spectrum model for LrWpan. More... | |
class | LteAmc |
The LteAmc class implements the Adaptive Modulation And Coding Scheme as proposed in 3GPP TSG-RAN WG1 - R1-081483 http://www.3gpp.org/ftp/tsg_ran/WG1_RL1/TSGR1_52b/Docs/R1-081483.zip. More... | |
class | LteAnr |
Automatic Neighbour Relation function. More... | |
class | LteAnrSapProvider |
Service Access Point (SAP) offered by the ANR instance to the eNodeB RRC instance. More... | |
class | LteAnrSapUser |
Service Access Point (SAP) offered by the eNodeB RRC instance to the ANR instance. More... | |
class | LteAsSapProvider |
This class implements the Access Stratum (AS) Service Access Point (SAP), i.e., the interface between the EpcUeNas and the LteUeRrc. More... | |
class | LteAsSapUser |
This class implements the Access Stratum (AS) Service Access Point (SAP), i.e., the interface between the EpcUeNas and the LteUeRrc In particular, this class implements the User part of the SAP, i.e., the methods exported by the EpcUeNas and called by the LteUeRrc. More... | |
class | LteControlMessage |
The LteControlMessage provides a basic implementations for control messages (such as PDCCH allocation map, CQI feedbacks) that are exchanged among eNodeB and UEs. More... | |
class | LteCtrlSinrChunkProcessor |
The LteCtrlSinrChunkProcessor averages the calculated SINR over time for the Ctrl frame and therefore in charge of generating the CQI starting from the reference signals and the sinr values used for evaluating the decodification error probability of the control channels (PCFICH + PDCCH) More... | |
class | LteDataRadioBearerInfo |
store information on active data radio bearer instance More... | |
class | LteDataSinrChunkProcessor |
The LteDataSinrChunkProcessor averages the calculated SINR over time for data frame and therefore in charge of generating the sinr values for evaluating the errors of data packets. More... | |
class | LteEnbCmacSapProvider |
Service Access Point (SAP) offered by the eNB MAC to the eNB RRC See Femto Forum MAC Scheduler Interface Specification v 1.11, Figure 1. More... | |
class | LteEnbCmacSapUser |
Service Access Point (SAP) offered by the MAC to the RRC See Femto Forum MAC Scheduler Interface Specification v 1.11, Figure 1. More... | |
class | LteEnbCphySapProvider |
Service Access Point (SAP) offered by the UE PHY to the UE RRC for control purposes. More... | |
class | LteEnbCphySapUser |
Service Access Point (SAP) offered by the UE PHY to the UE RRC for control purposes. More... | |
class | LteEnbMac |
This class implements the MAC layer of the eNodeB device. More... | |
class | LteEnbNetDevice |
The eNodeB device implementation. More... | |
class | LteEnbPhy |
LteEnbPhy models the physical layer for the eNodeB. More... | |
class | LteEnbPhySapProvider |
Service Access Point (SAP) offered by the eNB-PHY to the eNB-MAC. More... | |
class | LteEnbPhySapUser |
Service Access Point (SAP) offered by the eNB-PHY to the eNB-MAC. More... | |
class | LteEnbRrc |
The LTE Radio Resource Control entity at the eNB. More... | |
class | LteEnbRrcProtocolIdeal |
Models the transmission of RRC messages from the UE to the eNB in an ideal fashion, without errors and without consuming any radio resources. More... | |
class | LteEnbRrcProtocolReal |
Models the transmission of RRC messages from the UE to the eNB in a real fashion, by creating real RRC PDUs and transmitting them over Signaling Radio Bearers using radio resources allocated by the LTE MAC scheduler. More... | |
class | LteEnbRrcSapProvider |
Part of the RRC protocol. More... | |
class | LteEnbRrcSapUser |
Part of the RRC protocol. More... | |
class | LteFfConverter |
struct | LteFlowId_t |
class | LteGlobalPathlossDatabase |
Store the last pathloss value for each TX-RX pair. More... | |
class | LteHandoverAlgorithm |
The abstract base class of a handover algorithm that operates using the Handover Management SAP interface. More... | |
class | LteHandoverManagementSapProvider |
Service Access Point (SAP) offered by the handover algorithm instance to the eNodeB RRC instance. More... | |
class | LteHandoverManagementSapUser |
Service Access Point (SAP) offered by the eNodeB RRC instance to the handover algorithm instance. More... | |
class | LteHarqPhy |
The LteHarqPhy class implements the HARQ functionalities related to PHY layer (i.e., decodification buffers for incremental redundancy managment) More... | |
class | LteHelper |
Creation and configuration of LTE entities. More... | |
class | LteHexGridEnbTopologyHelper |
This helper class allows to easily create a topology with eNBs grouped in three-sector sites layed out on an hexagonal grid. More... | |
class | LteInterference |
This class implements a gaussian interference model, i.e., all incoming signals are added to the total interference. More... | |
class | LteInterferencePowerChunkProcessor |
The LteInterferencePowerChunkProcessor averages the interference power over time for data frame and therefore in charge of generating the interference power linear values for generating the interference power tracing at eNB side. More... | |
class | LteMacSapProvider |
Service Access Point (SAP) offered by the MAC to the RLC See Femto Forum MAC Scheduler Interface Specification v 1.11, Figure 1. More... | |
class | LteMacSapUser |
Service Access Point (SAP) offered by the MAC to the RLC See Femto Forum MAC Scheduler Interface Specification v 1.11, Figure 1. More... | |
class | LteMiErrorModel |
This class provides the BLER estimation based on mutual information metrics. More... | |
class | LteNetDevice |
LteNetDevice provides basic implementation for all LTE network devices. More... | |
class | LtePdcp |
LTE PDCP entity, see 3GPP TS 36.323. More... | |
class | LtePdcpHeader |
The packet header for the Packet Data Convergence Protocol (PDCP) packets. More... | |
class | LtePdcpSapProvider |
Service Access Point (SAP) offered by the PDCP entity to the RRC entity See 3GPP 36.323 Packet Data Convergence Protocol (PDCP) specification. More... | |
class | LtePdcpSapUser |
Service Access Point (SAP) offered by the PDCP entity to the RRC entity See 3GPP 36.323 Packet Data Convergence Protocol (PDCP) specification. More... | |
class | LtePdcpSpecificLtePdcpSapProvider |
class | LtePdcpSpecificLtePdcpSapUser |
class | LtePdcpSpecificLteRlcSapUser |
class | LtePhy |
The LtePhy models the physical layer of LTE. More... | |
class | LtePhyTag |
Tag used to define PHY parameters. More... | |
class | LteRadioBearerInfo |
store information on active radio bearer instance More... | |
class | LteRadioBearerTag |
Tag used to define the RNTI and LC id for each MAC packet trasmitted. More... | |
class | LteRlc |
This abstract base class defines the API to interact with the Radio Link Control (LTE_RLC) in LTE, see 3GPP TS 36.322. More... | |
class | LteRlcAm |
LTE RLC Acknowledged Mode (AM), see 3GPP TS 36.322. More... | |
class | LteRlcAmHeader |
The packet header for the AM Radio Link Control (RLC) protocol packets. More... | |
class | LteRlcHeader |
The packet header for the Radio Link Control (RLC) protocol packets. More... | |
class | LteRlcSapProvider |
Service Access Point (SAP) offered by the UM-RLC and AM-RLC entities to the PDCP entity See 3GPP 36.322 Radio Link Control (RLC) protocol specification. More... | |
class | LteRlcSapUser |
Service Access Point (SAP) offered by the UM-RLC and AM-RLC entities to the PDCP entity See 3GPP 36.322 Radio Link Control (RLC) protocol specification. More... | |
class | LteRlcSduStatusTag |
This class implements a tag that carries the status of a RLC SDU for the fragmentation process Status of RLC SDU. More... | |
class | LteRlcSm |
LTE_RLC Saturation Mode (SM): simulation-specific mode used for experiments that do not need to consider the layers above the LTE_RLC. More... | |
class | LteRlcSpecificLteMacSapUser |
class | LteRlcSpecificLteRlcSapProvider |
class | LteRlcSpecificLteRlcSapUser |
class | LteRlcTm |
LTE RLC Transparent Mode (TM), see 3GPP TS 36.322. More... | |
class | LteRlcUm |
LTE RLC Unacknowledged Mode (UM), see 3GPP TS 36.322. More... | |
class | LteRrcSap |
Class holding definition common to all UE/eNodeB SAP Users/Providers. More... | |
class | LteRsReceivedPowerChunkProcessor |
The LteRsReceivedPowerChunkProcessor averages the received signal power over time for data frame and therefore in charge of generating the power linear values for generating the RSRP tracing at eNB side. More... | |
class | LteSignalingRadioBearerInfo |
store information on active signaling radio bearer instance More... | |
class | LteSimpleHelper |
Creation and configuration of LTE entities. More... | |
class | LteSimpleNetDevice |
The LteSimpleNetDevice class implements the LTE simple net device. More... | |
class | LteSinrChunkProcessor |
This abstract class is used to process the time-vs-frequency SINR chunk of a received LTE signal which was calculated by the LteInterference object. More... | |
struct | LteSpectrumModelId |
class | LteSpectrumPhy |
The LteSpectrumPhy models the physical layer of LTE. More... | |
struct | LteSpectrumSignalParameters |
Signal parameters for Lte. More... | |
struct | LteSpectrumSignalParametersDataFrame |
Signal parameters for Lte Data Frame (PDSCH), and eventually after some control messages through other control channel embedded in PDSCH (i.e. More... | |
struct | LteSpectrumSignalParametersDlCtrlFrame |
Signal parameters for Lte DL Ctrl Frame (RS, PCFICH and PDCCH) More... | |
struct | LteSpectrumSignalParametersUlSrsFrame |
Signal parameters for Lte SRS Frame. More... | |
class | LteSpectrumValueHelper |
This class defines all functions to create spectrum model for lte. More... | |
class | LteStatsCalculator |
Doxygen introspection did not find any typical Config paths. More... | |
class | LteTestMac |
This class implements a testing loopback MAC layer. More... | |
class | LteTestPdcp |
This class implements a testing PDCP entity. More... | |
class | LteTestRrc |
This class implements a testing RRC entity. More... | |
class | LteTestSinrChunkProcessor |
This custom LteSinrChunkProcessor averages the calculated SINR over time. More... | |
class | LteTestUePhy |
class | LteUeCmacSapProvider |
Service Access Point (SAP) offered by the UE MAC to the UE RRC. More... | |
class | LteUeCmacSapUser |
Service Access Point (SAP) offered by the UE MAC to the UE RRC. More... | |
struct | LteUeConfig_t |
Parameters for configuring the UE. More... | |
class | LteUeCphySapProvider |
Service Access Point (SAP) offered by the UE PHY to the UE RRC for control purposes. More... | |
class | LteUeCphySapUser |
Service Access Point (SAP) offered by the UE PHY to the UE RRC for control purposes. More... | |
class | LteUeMac |
class | LteUeNetDevice |
The LteUeNetDevice class implements the UE net device. More... | |
class | LteUePhy |
The LteSpectrumPhy models the physical layer of LTE. More... | |
class | LteUePhySapProvider |
Service Access Point (SAP) offered by the UE-PHY to the UE-MAC. More... | |
class | LteUePhySapUser |
Service Access Point (SAP) offered by the PHY to the MAC. More... | |
class | LteUeRrc |
class | LteUeRrcProtocolIdeal |
Models the transmission of RRC messages from the UE to the eNB in an ideal fashion, without errors and without consuming any radio resources. More... | |
class | LteUeRrcProtocolReal |
Models the transmission of RRC messages from the UE to the eNB in a real fashion, by creating real RRC PDUs and transmitting them over Signaling Radio Bearers using radio resources allocated by the LTE MAC scheduler. More... | |
class | LteUeRrcSapProvider |
Part of the RRC protocol. More... | |
class | LteUeRrcSapUser |
Part of the RRC protocol. More... | |
class | Mac16Address |
This class can contain 16 bit addresses. More... | |
class | Mac16AddressValue |
hold objects of type ns3::Mac16Address More... | |
class | Mac48Address |
an EUI-48 address More... | |
class | Mac48AddressValue |
hold objects of type ns3::Mac48Address More... | |
class | Mac64Address |
an EUI-64 address More... | |
class | Mac64AddressValue |
hold objects of type ns3::Mac64Address More... | |
struct | MacCeListElement_s |
See section 4.3.14 macCEListElement. More... | |
struct | MacCeValue_u |
See section 4.3.15 macCEValue. More... | |
class | MacHeaderType |
Represents the HT (Header Type) field of generic MAC and bandwidth request headers. More... | |
class | MacLow |
handle RTS/CTS/DATA/ACK transactions. More... | |
class | MacLowBlockAckEventListener |
listen for block ack events. More... | |
class | MacLowDcfListener |
listen to NAV eventsThis class is typically connected to an instance of ns3::Dcf and calls to its methods are forwards to the corresponding ns3::Dcf methods. More... | |
class | MacLowTransmissionListener |
listen to events coming from ns3::MacLow. More... | |
class | MacLowTransmissionParameters |
control how a packet is transmitted. More... | |
class | MacRxMiddle |
This class handles duplicate detection and recomposition of fragments. More... | |
class | MacStatsCalculator |
Takes care of storing the information generated at MAC layer. More... | |
class | MacTxMiddle |
Handles sequence numbering of IEEE 802.11 data frames. More... | |
class | ManagementMessageType |
Doxygen introspection did not find any typical Config paths. More... | |
class | MapScheduler |
a std::map event scheduler More... | |
class | MatrixPropagationLossModel |
The propagation loss is fixed for each pair of nodes and doesn't depend on their actual positions. More... | |
struct | McpsDataConfirmParams |
struct | McpsDataIndicationParams |
struct | McpsDataRequestParams |
class | MeasurementReportHeader |
This class manages the serialization/deserialization of MeasurementReport IE. More... | |
class | MemberEpcEnbS1SapProvider |
Template for the implementation of the EpcEnbS1SapProvider as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberEpcEnbS1SapUser |
Template for the implementation of the EpcEnbS1SapUser as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberEpcS11SapMme |
Template for the implementation of the EpcS11SapMme as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberEpcS11SapSgw |
Template for the implementation of the EpcS11SapSgw as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberEpcS1apSapEnb |
Template for the implementation of the EpcS1apSapEnb as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberEpcS1apSapMme |
Template for the implementation of the EpcS1apSapMme as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberLteAnrSapProvider |
Template for the implementation of the LteAnrSapProvider as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberLteAnrSapUser |
Template for the implementation of the LteAnrSapUser as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberLteAsSapProvider |
Template for the implementation of the LteAsSapProvider as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberLteAsSapUser |
Template for the implementation of the LteAsSapUser as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberLteEnbCphySapProvider |
Template for the implementation of the LteEnbCphySapProvider as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberLteEnbCphySapUser |
Template for the implementation of the LteEnbCphySapUser as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberLteEnbRrcSapProvider |
Template for the implementation of the LteEnbRrcSapProvider as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberLteEnbRrcSapUser |
Template for the implementation of the LteEnbRrcSapUser as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberLteHandoverManagementSapProvider |
Template for the implementation of the LteHandoverManagementSapProvider as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberLteHandoverManagementSapUser |
Template for the implementation of the LteHandoverManagementSapUser as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberLteUeCphySapProvider |
Template for the implementation of the LteUeCphySapProvider as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberLteUeCphySapUser |
Template for the implementation of the LteUeCphySapUser as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberLteUeRrcSapProvider |
Template for the implementation of the LteUeRrcSapProvider as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemberLteUeRrcSapUser |
Template for the implementation of the LteUeRrcSapUser as a member of an owner class of type C to which all methods are forwarded. More... | |
class | MemPtrCallbackImpl |
CallbackImpl for pointer to member functions. More... | |
class | MeshHelper |
Helper to create IEEE 802.11s mesh networks. More... | |
class | MeshInformationElementVector |
class | MeshL2RoutingProtocol |
Interface for L2 mesh routing protocol and mesh point communication. More... | |
class | MeshPointDevice |
Virtual net device modeling mesh point. More... | |
class | MeshStack |
Prototype for class, which helps to install MAC-layer routing stack to ns3::MeshPointDevice. More... | |
class | MeshWifiBeacon |
Beacon is beacon header + list of arbitrary information elements. More... | |
class | MeshWifiInterfaceMac |
Basic MAC of mesh point Wi-Fi interface. More... | |
class | MeshWifiInterfaceMacPlugin |
Common interface for mesh point interface MAC plugins. More... | |
class | MgtAddBaRequestHeader |
Implement the header for management frames of type add block ack request. More... | |
class | MgtAddBaResponseHeader |
Implement the header for management frames of type add block ack response. More... | |
class | MgtAssocRequestHeader |
Implement the header for management frames of type association request. More... | |
class | MgtAssocResponseHeader |
Implement the header for management frames of type association response. More... | |
class | MgtBeaconHeader |
Implement the header for management frames of type beacon. More... | |
class | MgtDelBaHeader |
Implement the header for management frames of type del block ack. More... | |
class | MgtProbeRequestHeader |
Implement the header for management frames of type probe request. More... | |
class | MgtProbeResponseHeader |
Implement the header for management frames of type probe response. More... | |
class | MibLteControlMessage |
Abstract model for broadcasting the Master Information Block (MIB) within the control channel (BCCH). More... | |
class | MicrowaveOvenSpectrumModel5MhzInitializer |
class | MicrowaveOvenSpectrumModel6MhzInitializer |
class | MicrowaveOvenSpectrumValueHelper |
This class provides methods for the creation of SpectrumValue instances that mimic the Power Spectral Density of commercial microwave ovens based on the measurements reported in the following paper: Tanim M. More... | |
class | MinMaxAvgTotalCalculator |
Template class MinMaxAvgTotalCalculator. More... | |
class | MinstrelWifiManager |
Implementation of Minstrel Rate Control AlgorithmPorting Minstrel from Madwifi and Linux Kernel http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/minstrel. More... | |
struct | MinstrelWifiRemoteStation |
hold per-remote-station state for Minstrel Wifi manager. More... | |
class | MobilityBuildingInfo |
mobility buildings information (to be used by mobility models) More... | |
class | MobilityHelper |
Helper class used to assign positions and mobility models to nodes. More... | |
class | MobilityModel |
Keep track of the current position and velocity of an object. More... | |
class | ModelCreator |
struct | ModelNode |
struct | ModelTypeid |
class | ModelTypeidCreator |
class | MpiInterface |
Singleton used to interface to the communications infrastructure when running NS3 in parallel. More... | |
class | MpiReceiver |
Class to aggregate to a NetDevice if it supports MPI capability. More... | |
class | MsduAggregator |
Abstract class that concrete msdu aggregators have to implement. More... | |
class | MsduStandardAggregator |
Standard MSDU aggregator. More... | |
class | MultiModelSpectrumChannel |
This SpectrumChannel implementation can handle the presence of SpectrumPhy instances which can use different spectrum models, i.e., different SpectrumModel. More... | |
class | NakagamiPropagationLossModel |
Nakagami-m fast fading propagation loss model. More... | |
class | NameNode |
class | Names |
A directory of name and Ptr<Object> associations that allows us to give any ns3 Object a name. More... | |
class | NamesPriv |
class | NdiscCache |
Doxygen introspection did not find any typical Config paths. More... | |
class | NetDevice |
Network layer to device interface. More... | |
class | NetDeviceContainer |
holds a vector of ns3::NetDevice pointers More... | |
class | NistErrorRateModel |
A model for the error rate for different modulations. More... | |
class | NixVector |
Neighbor-index data structure for nix-vector routing. More... | |
class | Node |
A network Node. More... | |
class | NodeContainer |
keep track of a set of node pointers. More... | |
class | NodeList |
the list of simulation nodes. More... | |
class | NodeListPriv |
private implementation detail of the NodeList API. More... | |
struct | NodeSize |
A structure to store the width and height of a node`. More... | |
class | NonCommunicatingNetDevice |
This class implements a device which does not communicate, in the sense that it does not interact with the above protocol stack. More... | |
class | NoneFileConfig |
class | NoOpHandoverAlgorithm |
Handover algorithm implementation which simply does nothing. More... | |
class | NormalRandomVariable |
The normal (Gaussian) distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically. More... | |
class | NormalVariable |
Class NormalVariable defines a random variable with a normal (Gaussian) distribution. More... | |
class | NormalVariableImpl |
class | NqosWaveMacHelper |
class | NqosWifiMacHelper |
create non QoS-enabled MAC layers for a ns3::WifiNetDevice. More... | |
class | Ns2MobilityHelper |
Helper class which can read ns-2 movement files and configure nodes mobility. More... | |
class | Ns3NscStack |
This object represents the underlying nsc stack, which is aggregated to a Node object, and which provides access to the sysctls of the nsc stack through attributes. More... | |
class | NscInterfaceImpl |
Nsc interface implementation class. More... | |
class | NscStackStringAccessor |
This object represent the underlying nsc stack attributes and provide a ns-3-like system to access them though sysctls. More... | |
class | NscTcpL4Protocol |
Nsc wrapper glue, to interface with the Ipv4 protocol underneath. More... | |
class | NscTcpSocketFactoryImpl |
socket factory implementation for creating instances of NSC TCP More... | |
class | NscTcpSocketImpl |
Socket logic for the NSC TCP sockets. More... | |
class | NullMessageMpiInterface |
Interface between ns-3 and MPI for the Null Message distributed simulation implementation. More... | |
class | NullMessageSentBuffer |
Non-blocking send buffers for Null Message implementation. More... | |
class | NullMessageSimulatorImpl |
Simulator implementation using MPI and a Null Message algorithm. More... | |
class | Object |
a base class which provides memory management and object aggregation More... | |
class | ObjectBase |
implement the ns-3 type and attribute system More... | |
struct | ObjectDeleter |
class | ObjectFactory |
instantiate subclasses of ns3::Object. More... | |
class | ObjectFactoryValue |
hold objects of type ns3::ObjectFactory More... | |
class | ObjectPtrContainerAccessor |
class | ObjectPtrContainerChecker |
class | ObjectPtrContainerValue |
contain a set of ns3::Object pointers. More... | |
class | OcbWifiMac |
STAs communicate with each directly outside the context of a BSSIn OCB mac mode,synchronization, association, dis-association and authentication of normal wifi are not used for wireless access in vehicular environments. More... | |
class | OfdmDcdChannelEncodings |
class | OfdmDlBurstProfile |
class | OfdmDlMapIe |
class | OfdmDownlinkFramePrefix |
class | OfdmSendParams |
class | OfdmUcdChannelEncodings |
class | OfdmUlBurstProfile |
class | OfdmUlMapIe |
class | OhBuildingsPropagationLossModel |
this model combines the OkumuraHata model with the BuildingsPropagationLossModel More... | |
class | OkumuraHataPropagationLossModel |
this class implements the Okumura Hata propagation loss model More... | |
class | OlsrHelper |
Helper class that adds OLSR routing to nodes. More... | |
class | OmnetDataOutput |
Outputs data in a format compatible with OMNeT library and framework. More... | |
class | OnoeWifiManager |
an implementation of the rate control algorithm developed by Atsushi Onoe More... | |
struct | OnoeWifiRemoteStation |
hold per-remote-station state for ONOE Wifi manager. More... | |
class | OnOffApplication |
Generate traffic to a single destination according to an OnOff pattern. More... | |
class | OnOffHelper |
A helper to make it easier to instantiate an ns3::OnOffApplication on a set of nodes. More... | |
class | OpenFlowSwitchHelper |
Add capability to switch multiple LAN segments (IEEE 802.1D bridging) More... | |
class | OpenFlowSwitchNetDevice |
A net device that switches multiple LAN segments via an OpenFlow-compatible flow table. More... | |
class | OptionField |
Option field for an IPv6ExtensionHeader Enables adding options to an IPv6ExtensionHeader. More... | |
class | OrbisTopologyReader |
Topology file reader (Orbis-format type). More... | |
class | OrganizationIdentifier |
the organization identifier is a public organizationally unique identifier assigned by the IEEE. More... | |
class | OriginatorBlockAckAgreement |
Maintains the state and information about transmitted MPDUs with ack policy block ack for an originator station. More... | |
class | OriginatorRxStatus |
A class to keep track of the packet originator status. More... | |
class | OutputStreamWrapper |
A class encapsulating an output stream. More... | |
struct | P2pLinkNodeIdPair |
class | Packet |
network packets More... | |
class | PacketBurst |
this class implement a burst as a list of packets More... | |
class | PacketCounterCalculator |
A stat for counting packets. More... | |
class | PacketLossCounter |
A class to count the number of lost packets. More... | |
class | PacketMetadata |
Handle packet metadata about packet headers and trailers. More... | |
class | PacketProbe |
This class is designed to probe an underlying ns3 TraceSource exporting a packet. More... | |
class | PacketSink |
Receive and consume traffic generated to an IP address and port. More... | |
class | PacketSinkHelper |
A helper to make it easier to instantiate an ns3::PacketSinkApplication on a set of nodes. More... | |
class | PacketSizeMinMaxAvgTotalCalculator |
A stat for collecting packet size statistics: min, max and average. More... | |
class | PacketSocket |
A PacketSocket is a link between an application and a net device. More... | |
class | PacketSocketAddress |
an address for a packet socket More... | |
class | PacketSocketFactory |
This can be used as an interface in a node in order for the node to generate PacketSockets that can connect to net devices. More... | |
class | PacketSocketHelper |
Give ns3::PacketSocket powers to ns3::Node. More... | |
class | PacketSocketTag |
This class implements a tag that carries the dest address of a packet and the packet type. More... | |
class | PacketTagIterator |
Iterator over the set of packet tags in a packet. More... | |
class | PacketTagList |
List of the packet tags stored in a packet. More... | |
struct | PagingInfoListElement_s |
See section 4.3.30 pagingInfoListElement. More... | |
class | ParabolicAntennaModel |
Antenna model based on a parabolic approximation of the main lobe radiation pattern. More... | |
class | ParallelCommunicationInterface |
Pure virtual base class for the interface between ns-3 and the parallel communication layer being used. More... | |
class | ParameterLogger |
Insert , when streaming function arguments. More... | |
class | ParetoRandomVariable |
The Pareto distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically. More... | |
class | ParetoVariable |
ParetoVariable distributed random varThis class supports the creation of objects that return random numbers from a fixed pareto distribution. More... | |
class | ParetoVariableImpl |
struct | ParseResult |
class | PbbAddressBlock |
An Address Block and its associated Address TLV Blocks. More... | |
class | PbbAddressBlockIpv4 |
Concrete IPv4 specific PbbAddressBlock. More... | |
class | PbbAddressBlockIpv6 |
Concrete IPv6 specific PbbAddressBlock. More... | |
class | PbbAddressTlv |
An Address TLV. More... | |
class | PbbAddressTlvBlock |
A block of Address TLVs (PbbAddressTlv). More... | |
class | PbbMessage |
A message within a PbbPacket packet. More... | |
class | PbbMessageIpv4 |
Concrete IPv4 specific PbbMessage. More... | |
class | PbbMessageIpv6 |
Concrete IPv6 specific PbbMessage class. More... | |
class | PbbPacket |
Main PacketBB Packet object. More... | |
class | PbbTlv |
A packet or message TLV. More... | |
class | PbbTlvBlock |
A block of packet or message TLVs (PbbTlv). More... | |
class | PcapFile |
A class representing a pcap file. More... | |
class | PcapFileWrapper |
A class that wraps a PcapFile as an ns3::Object and provides a higher-layer ns-3 interface to the low-level public methods of PcapFile. More... | |
class | PcapHelper |
Manage pcap files for device models. More... | |
class | PcapHelperForDevice |
Base class providing common user-level pcap operations for helpers representing net devices. More... | |
class | PcapHelperForIpv4 |
Base class providing common user-level pcap operations for helpers representing IPv4 protocols . More... | |
class | PcapHelperForIpv6 |
Base class providing common user-level pcap operations for helpers representing IPv6 protocols . More... | |
class | PdcpTag |
Tag to calculate the per-PDU delay from eNb PDCP to UE PDCP. More... | |
class | PendingData |
class for managing I/O between applications and TCP More... | |
class | PfFfMacScheduler |
Implements the SCHED SAP and CSCHED SAP for a Proportional Fair scheduler. More... | |
class | PfSchedulerMemberCschedSapProvider |
class | PfSchedulerMemberSchedSapProvider |
struct | pfsFlowPerf_t |
struct | PhichListElement_s |
See section 4.3.7 phichListElement. More... | |
class | PhyListener |
Listener for PHY events. More... | |
class | PhyMacLowListener |
Listener for PHY events. More... | |
struct | PhyReceptionStatParameters |
class | PhyRxStatsCalculator |
Takes care of storing the information generated at PHY layer regarding reception. More... | |
class | PhyStatsCalculator |
Takes care of storing the information generated at PHY layer. More... | |
struct | PhyTransmissionStatParameters |
class | PhyTxStatsCalculator |
Takes care of storing the information generated at PHY layer regarding transmission. More... | |
class | Ping6 |
A ping6 application. More... | |
class | Ping6Helper |
Ping6 application helper. More... | |
class | PlanetLabFdNetDeviceHelper |
build a set of FdNetDevice objects attached to a virtual TAP network interface More... | |
class | PointerChecker |
class | PointerValue |
hold objects of type Ptr<T> More... | |
class | PointToPointChannel |
Simple Point To Point Channel. More... | |
class | PointToPointDumbbellHelper |
A helper to make it easier to create a dumbbell topology with p2p links. More... | |
class | PointToPointEpcHelper |
Create an EPC network with PointToPoint links. More... | |
class | PointToPointGridHelper |
A helper to make it easier to create a grid topology with p2p links. More... | |
class | PointToPointHelper |
Build a set of PointToPointNetDevice objects. More... | |
class | PointToPointNetDevice |
A Device for a Point to Point Network Link. More... | |
class | PointToPointRemoteChannel |
class | PointToPointStarHelper |
A helper to make it easier to create a star topology with PointToPoint links. More... | |
class | PortRangeTlvValue |
class | PositionAllocator |
Allocate a set of positions. More... | |
class | PppHeader |
Packet header for PPP. More... | |
class | PrintList |
class | PriorityUlJob |
class | Probe |
Base class for probes. More... | |
class | PropagationCache |
Constructs a cache of objects, where each obect is responsible for a single propagation path loss calculations. More... | |
class | PropagationDelayModel |
calculate a propagation delay. More... | |
class | PropagationLossModel |
Modelize the propagation loss through a transmission medium. More... | |
class | ProtocolTlvValue |
class | PssFfMacScheduler |
Implements the SCHED SAP and CSCHED SAP for a Priority Set scheduler. More... | |
struct | pssFlowPerf_t |
Flow information. More... | |
class | PssSchedulerMemberCschedSapProvider |
class | PssSchedulerMemberSchedSapProvider |
class | Ptr |
smart pointer class similar to boost::intrusive_ptr More... | |
class | PyViz |
helper class to be used by the visualizer More... | |
struct | PyVizPacketTag |
struct | qos_rb_and_CQI_assigned_to_lc |
class | QosBlockedDestinations |
Keep track of destination address - TID pairs that are waiting for a block ACK response. More... | |
class | QosTag |
The aim of the QosTag is to provide means for an Application to specify the TID which will be used by a QoS-aware WifiMac for a given traffic flow. More... | |
class | QosWaveMacHelper |
class | QosWifiMacHelper |
create QoS-enabled MAC layers for a ns3::WifiNetDevice. More... | |
class | Queue |
Abstract base class for packet Queues. More... | |
struct | RachListElement_s |
See section 4.3.6 rachListElement. More... | |
class | RachPreambleLteControlMessage |
abstract model for the Random Access Preamble More... | |
class | RadioBearerStatsCalculator |
This class is an ns-3 trace sink that performs the calculation of PDU statistics for uplink and downlink. More... | |
class | RadioBearerStatsConnector |
class | RadioEnvironmentMapHelper |
Generates a 2D map of the SINR from the strongest transmitter in the downlink of an LTE FDD system. More... | |
class | RadiotapHeader |
Radiotap header implementation. More... | |
class | Radvd |
Router advertisement daemon. More... | |
class | RadvdHelper |
Radvd application helper. More... | |
class | RadvdInterface |
Radvd interface configuration. More... | |
class | RadvdPrefix |
Router prefix for radvd application. More... | |
class | RandomBoxPositionAllocator |
Allocate random positions within a 3D box according to a set of three random variables. More... | |
class | RandomBuildingPositionAllocator |
Allocate each position by randomly chosing a building from the list of all buildings, and then randomly chosing a position inside the building. More... | |
class | RandomDirection2dMobilityModel |
Random direction mobility model. More... | |
class | RandomDiscPositionAllocator |
Allocate random positions within a disc according to a given distribution for the polar coordinates of each node with respect to the provided center of the disc. More... | |
class | RandomPropagationDelayModel |
the propagation delay is random More... | |
class | RandomPropagationLossModel |
The propagation loss follows a random distribution. More... | |
class | RandomRectanglePositionAllocator |
Allocate random positions within a rectangle according to a pair of random variables. More... | |
class | RandomRoomPositionAllocator |
Allocate each position by randomly chosing a room from the list of all buildings, and then randomly chosing a position inside the room. More... | |
class | RandomStream |
A simple wrapper around RngStream to make testing of the code easier. More... | |
class | RandomVariable |
The basic RNG for NS-3. More... | |
class | RandomVariableBase |
class | RandomVariableStream |
The Random Number Generator (RNG) that allows stream numbers to be set deterministically. More... | |
class | RandomVariableStreamHelper |
Helper class for static methods involving RandomVariableStream. More... | |
class | RandomVariableValue |
hold objects of type ns3::RandomVariable More... | |
class | RandomWalk2dMobilityModel |
2D random walk mobility model. More... | |
class | RandomWaypointMobilityModel |
Random waypoint mobility model. More... | |
class | RangePropagationLossModel |
The propagation loss depends only on the distance (range) between transmitter and receiver. More... | |
class | RarLteControlMessage |
abstract model for the MAC Random Access Response message More... | |
class | RateErrorModel |
Determine which packets are errored corresponding to an underlying distribution, rate, and unit. More... | |
struct | RateInfo |
A struct to contain all information related to a data rate. More... | |
class | RawTextConfigLoad |
class | RawTextConfigSave |
class | RealProtocolRlcSapUser |
class | RealRandomStream |
class | RealtimeSimulatorImpl |
Doxygen introspection did not find any typical Config paths. More... | |
class | ReceiveListErrorModel |
Provide a list of Packets to corrupt. More... | |
class | Rectangle |
a 2d rectangle More... | |
class | RectangleValue |
hold objects of type ns3::Rectangle More... | |
class | RedQueue |
A RED packet queue. More... | |
class | RefCountBase |
A deprecated way to get reference-counting powers. More... | |
class | RegularWifiMac |
base class for all MAC-level wifi objects. More... | |
class | RemoteChannelBundle |
Collection of NS3 channels between local and remote nodes. More... | |
class | RemoteChannelBundleManager |
class | RemSpectrumPhy |
This minimal SpectrumPhy implemetation calculates the SINR with respect to the strongest signal for a given point. More... | |
class | Reservation |
Stores reservation info for use in scheduling data channel by reservation channel MAC. More... | |
class | Resolver |
struct | Rgb |
A structure to store red, blue and green components for entities such as nodes. More... | |
class | RipNg |
RIPng Routing Protocol, defined in {2080}. More... | |
class | RipNgHeader |
RipNgHeader - see RFC 2080 More... | |
class | RipNgHelper |
Helper class that adds RIPng routing to nodes. More... | |
class | RipNgRoutingTableEntry |
RipNg Routing Table Entry. More... | |
class | RipNgRte |
RipNg Routing Table Entry (RTE) - see RFC 2080 More... | |
struct | RlcPduListElement_s |
See section 4.3.9 rlcPDU_ListElement. More... | |
class | RlcTag |
Tag to calculate the per-PDU delay from eNb RLC to UE RLC. More... | |
class | RngReq |
Doxygen introspection did not find any typical Config paths. More... | |
class | RngRsp |
Doxygen introspection did not find any typical Config paths. More... | |
class | RngSeedManager |
class | RngStream |
Combined Multiple-Recursive Generator MRG32k3a. More... | |
class | RocketfuelTopologyReader |
Topology file reader (Rocketfuel-format type). More... | |
class | RraaWifiManager |
Robust Rate Adaptation AlgorithmThis is an implementation of RRAA as described in "Robust rate adaptation for 802.11 wireless networks" by "Starsky H. Y. Wong", "Hao Yang", "Songwu Lu", and, "Vaduvur Bharghavan" published in Mobicom 06. More... | |
struct | RraaWifiRemoteStation |
hold per-remote-station state for RRAA Wifi manager. More... | |
class | RrcAsn1Header |
This class extends Asn1Header functions, adding serialization/deserialization of some Information elements defined in 3GPP TS 36.331. More... | |
class | RrcConnectionReconfigurationCompleteHeader |
This class manages the serialization/deserialization of RrcConnectionSetupComplete IE. More... | |
class | RrcConnectionReconfigurationHeader |
This class manages the serialization/deserialization of RrcConnectionReconfiguration IE. More... | |
class | RrcConnectionReestablishmentCompleteHeader |
This class manages the serialization/deserialization of RrcConnectionReestablishmentComplete IE. More... | |
class | RrcConnectionReestablishmentHeader |
This class manages the serialization/deserialization of RrcConnectionReestablishment IE. More... | |
class | RrcConnectionReestablishmentRejectHeader |
This class manages the serialization/deserialization of RrcConnectionReestablishmentReject IE. More... | |
class | RrcConnectionReestablishmentRequestHeader |
This class manages the serialization/deserialization of RRCConnectionReestablishmentRequest IE. More... | |
class | RrcConnectionRejectHeader |
This class manages the serialization/deserialization of RrcConnectionReject IE. More... | |
class | RrcConnectionReleaseHeader |
This class manages the serialization/deserialization of RrcConnectionRelease IE. More... | |
class | RrcConnectionRequestHeader |
This class manages the serialization/deserialization of RrcConnectionRequest IE. More... | |
class | RrcConnectionSetupCompleteHeader |
This class manages the serialization/deserialization of RrcConnectionSetupComplete IE. More... | |
class | RrcConnectionSetupHeader |
This class manages the serialization/deserialization of RrcConnectionSetup IE. More... | |
class | RrcDlCcchMessage |
This class only serves to discriminate which message type has been received in downlink (eNb to ue) for channel CCCH. More... | |
class | RrcDlDcchMessage |
This class only serves to discriminate which message type has been received in downlink (eNb to ue) for channel DCCH. More... | |
class | RrcUlCcchMessage |
This class only serves to discriminate which message type has been received in uplink (ue to eNb) for channel CCCH. More... | |
class | RrcUlDcchMessage |
This class only serves to discriminate which message type has been received in uplink (ue to eNb) for channel DCCH. More... | |
class | RrFfMacScheduler |
Implements the SCHED SAP and CSCHED SAP for a Round Robin scheduler. More... | |
class | RrSchedulerMemberCschedSapProvider |
class | RrSchedulerMemberSchedSapProvider |
class | RttEstimator |
Base class for all RTT Estimators. More... | |
class | RttHistory |
Helper class to store RTT measurements. More... | |
class | RttMeanDeviation |
The "Mean--Deviation" RTT estimator, as discussed by Van Jacobson. More... | |
class | RvBatteryModel |
Rakhmatov Vrudhula non-linear battery model. More... | |
class | RvBatteryModelHelper |
Creates a RvBatteryModel object. More... | |
class | RxSpectrumModelInfo |
class | SameRoomPositionAllocator |
Walks a given NodeContainer sequentially, and for each node allocate a new position randomly in the same room of that node. More... | |
struct | SbMeasResult_s |
See section 4.3.25 sbMeasResult. More... | |
class | Scheduler |
Maintain the event list. More... | |
class | SendParams |
The SendParams class defines the parameters with which Send() function of a particular PHY is called. More... | |
class | SentBuffer |
Tracks non-blocking sends. More... | |
class | SeqTsHeader |
Doxygen introspection did not find any typical Config paths. More... | |
class | SequenceNumber |
Generic "sequence number" class. More... | |
class | SequenceNumber10 |
class | SequentialRandomVariable |
The Random Number Generator (RNG) that returns a sequential list of values. More... | |
class | SequentialVariable |
Return a sequential list of valuesClass SequentialVariable defines a random number generator that returns a sequential sequence. More... | |
class | SequentialVariableImpl |
class | ServiceFlow |
This class implements service flows as described by the IEEE-802.16 standard. More... | |
class | ServiceFlowManager |
The same service flow manager class serves both for BS and SS though some functions are exclusive to only one of them. More... | |
class | ServiceFlowRecord |
this class implements a structure to manage some parameters and statistics related to a service flow More... | |
class | SfVectorTlvValue |
class | ShannonSpectrumErrorModel |
This class implements the error model described in this paper: N. More... | |
class | Sib1LteControlMessage |
Abstract model for broadcasting the System Information Block Type 1 (SIB1) within the control channel (BCCH). More... | |
struct | SiConfiguration_s |
See section 4.3.21 siConfiguration. More... | |
struct | SiMessageListElement_s |
See section 4.3.22 siMessageListElement. More... | |
class | SimpleChannel |
A simple channel, for simple things and testing. More... | |
class | SimpleDeviceEnergyModel |
A simple device energy model where current drain can be set by the user. More... | |
class | SimpleNetDevice |
This device does not have a helper and assumes 48-bit mac addressing; the default address assigned to each device is zero, so you must assign a real address to use it. More... | |
class | simpleOfdmSendParam |
class | SimpleOfdmWimaxChannel |
class | SimpleOfdmWimaxPhy |
class | SimpleRefCount |
A template-based reference counting class. More... | |
class | SimulationSingleton |
This singleton class template ensures that the type for which we want a singleton has a lifetime bounded by the simulation lifetime. More... | |
class | Simulator |
Control the scheduling of simulation events. More... | |
class | SimulatorImpl |
Doxygen introspection did not find any typical Config paths. More... | |
class | SingleModelSpectrumChannel |
SpectrumChannel implementation which handles a single spectrum model. More... | |
class | Singleton |
a template singleton More... | |
class | SixLowPanDispatch |
Dispatch header helper. More... | |
class | SixLowPanFrag1 |
6LoWPAN FRAG1 header - see RFC 4944 More... | |
class | SixLowPanFragN |
6LoWPAN FRAGN header - see RFC 4944 More... | |
class | SixLowPanHc1 |
6LoWPAN HC1 header - see RFC 4944 More... | |
class | SixLowPanHelper |
Setup a sixlowpan stack to be used as a shim between IPv6 and a generic NetDevice. More... | |
class | SixLowPanIphc |
LOWPAN_IPHC base Encoding - see RFC 6282. More... | |
class | SixLowPanIpv6 |
6LoWPAN IPv6 uncomprssed header - see RFC 4944 More... | |
class | SixLowPanNetDevice |
Shim performing 6LoWPAN compression, decompression and fragmentation. More... | |
class | SixLowPanNhcExtension |
LOWPAN_NHC Extension Header Encoding - see RFC 6282. More... | |
class | SixLowPanUdpNhcExtension |
UDP LOWPAN_NHC Extension Header Encoding - see RFC 6282. More... | |
class | SnrTag |
Doxygen introspection did not find any typical Config paths. More... | |
class | SNRToBlockErrorRateManager |
This class handles the SNR to BlcER traces. More... | |
class | SNRToBlockErrorRateRecord |
This class represents a record (handled by SnrToBlockErrorRate manager) that keeps a mapping between an SNR value and its corresponding (1) Bit Error Rate, (2) Block Error Rate, (3) Standard deviation, (4 and 5) confidence interval. More... | |
class | Socket |
A low-level Socket API based loosely on the BSD Socket API. More... | |
class | SocketAddressTag |
This class implements a tag that carries an address of a packet across the socket interface. More... | |
class | SocketFactory |
Object to create transport layer instances that provide a socket API to applications. More... | |
class | SocketIpTosTag |
indicates whether the socket has IP_TOS set. More... | |
class | SocketIpTtlTag |
This class implements a tag that carries the socket-specific TTL of a packet to the IP layer. More... | |
class | SocketIpv6HopLimitTag |
This class implements a tag that carries the socket-specific HOPLIMIT of a packet to the IPv6 layer. More... | |
class | SocketIpv6TclassTag |
indicates whether the socket has IPV6_TCLASS set. More... | |
class | SocketSetDontFragmentTag |
indicates whether packets should be sent out with the DF (Don't Fragment) flag set. More... | |
class | SocketWriter |
struct | SortProcess |
struct | SortProcessPtr |
class | SpectrumAnalyzer |
Simple SpectrumPhy implemetation that averages the spectrum power density of incoming transmissions to produce a spectrogram. More... | |
class | SpectrumAnalyzerHelper |
class | SpectrumChannel |
Defines the interface for spectrum-aware channel implementations. More... | |
class | SpectrumChannelHelper |
class | SpectrumConverter |
Class which implements a converter between SpectrumValue which are defined over different SpectrumModel. More... | |
class | SpectrumErrorModel |
Doxygen introspection did not find any typical Config paths. More... | |
class | SpectrumInterference |
This class implements a gaussian interference model, i.e., all incoming signals are added to the total interference. More... | |
class | SpectrumModel |
Set of frequency values implementing the domain of the functions in the Function Space defined by SpectrumValue. More... | |
class | SpectrumPhy |
Abstract base class for Spectrum-aware PHY layers. More... | |
class | SpectrumPhyHelper |
create and configure several SpectrumPhy instances and connect them to a channel. More... | |
class | SpectrumPropagationLossModel |
spectrum-aware propagation loss model More... | |
struct | SpectrumSignalParameters |
This struct provides the generic signal representation to be used by all wireless technologies. More... | |
class | SpectrumValue |
Set of values corresponding to a given SpectrumModel. More... | |
class | SPFVertex |
Vertex used in shortest path first (SPF) computations. More... | |
struct | SpsConfig_s |
See section 4.3.17 spsConfig. More... | |
class | SqliteDataOutput |
Outputs data in a format compatible with SQLite. More... | |
struct | SrConfig_s |
See section 4.3.18 srConfig. More... | |
struct | SrListElement_s |
See section 4.3.13 srListElement. More... | |
class | SrsCqiRntiVsp |
Define the RNTI that has generated the. More... | |
class | Ssid |
The IEEE 802.11 SSID Information Element. More... | |
class | SsidValue |
hold objects of type ns3::Ssid More... | |
class | SSLinkManager |
this class implements the link manager of subscriber station net device. More... | |
class | SSManager |
this class manages a list of SSrecord More... | |
class | SSRecord |
This class is used by the base station to store some information related to subscriber station in the cell. More... | |
class | SSScheduler |
class | SsServiceFlowManager |
class | static_SpectrumModel300Khz300GhzLog_initializer |
class | static_SpectrumModelIsm2400MhzRes1Mhz_initializer |
class | StatisticalSummary |
Abstract class for calculating statistical data. More... | |
class | StatusCode |
Status code for association response. More... | |
class | StaWifiMac |
The Wifi MAC high model for a non-AP STA in a BSS. More... | |
class | SteadyStateRandomWaypointMobilityModel |
Steady-state random waypoint mobility model. More... | |
class | StringValue |
hold variables of type string More... | |
class | SubscriberStationNetDevice |
class | SupportedRates |
The Supported Rates Information ElementThis class knows how to serialise and deserialise the Supported Rates Element that holds the first 8 (non-HT) supported rates. More... | |
class | Synchronizer |
Base class used for synchronizing the simulation events to some real time "wall clock.". More... | |
class | SystemCondition |
A class which provides a relatively platform-independent conditional-wait thread synchronization primitive. More... | |
class | SystemConditionPrivate |
class | SystemMutex |
A class which provides a relatively platform-independent Mutual Exclusion thread synchronization primitive. More... | |
class | SystemMutexPrivate |
class | SystemThread |
A class which provides a relatively platform-independent thread primitive. More... | |
class | SystemWallClockMs |
measure elapsed time in milliseconds More... | |
class | SystemWallClockMsPrivate |
class | Tag |
tag a set of bytes in a packet More... | |
class | TagBuffer |
read and write tag data More... | |
class | Tap |
Holds PDP Tap information (amplitude and delay) More... | |
class | TapBridge |
A bridge to make it appear that a real host process is connected to an ns-3 net device. More... | |
class | TapBridgeFdReader |
class | TapBridgeHelper |
build TapBridge to allow ns-3 simulations to interact with Linux tap devices and processes on the Linux host. More... | |
class | TapFdNetDeviceHelper |
build a set of FdNetDevice objects attached to a virtua TAP network interface More... | |
struct | TbId_t |
struct | tbInfo_t |
struct | TbStats_t |
class | TcpHeader |
Header for the Transmission Control Protocol. More... | |
class | TcpL4Protocol |
A layer between the sockets interface and IP. More... | |
class | TcpNewReno |
An implementation of a stream socket using TCP. More... | |
class | TcpReno |
An implementation of a stream socket using TCP. More... | |
class | TcpRfc793 |
An implementation of a stream socket using TCP. More... | |
class | TcpRxBuffer |
class for the reordering buffer that keeps the data from lower layer, i.e. More... | |
class | TcpSocket |
(abstract) base class of all TcpSockets More... | |
class | TcpSocketBase |
A base class for implementation of a stream socket using TCP. More... | |
class | TcpSocketFactory |
API to create TCP socket instances. More... | |
class | TcpSocketFactoryImpl |
socket factory implementation for native ns-3 TCP More... | |
class | TcpTahoe |
An implementation of a stream socket using TCP. More... | |
class | TcpTxBuffer |
class for keeping the data sent by the application to the TCP socket, i.e. More... | |
class | TcpWestwood |
An implementation of a stream socket using TCP. More... | |
class | TdBetFfMacScheduler |
Implements the SCHED SAP and CSCHED SAP for a Time Domain Blind Equal Throughput scheduler. More... | |
class | TdBetSchedulerMemberCschedSapProvider |
class | TdBetSchedulerMemberSchedSapProvider |
struct | tdbetsFlowPerf_t |
class | TdMtFfMacScheduler |
Implements the SCHED SAP and CSCHED SAP for a Time Domain Maximize Throughput scheduler. More... | |
class | TdMtSchedulerMemberCschedSapProvider |
class | TdMtSchedulerMemberSchedSapProvider |
class | TdTbfqFfMacScheduler |
Implements the SCHED SAP and CSCHED SAP for a Time Domain Token Bank Fair Queue scheduler. More... | |
class | TdTbfqSchedulerMemberCschedSapProvider |
class | TdTbfqSchedulerMemberSchedSapProvider |
struct | tdtbfqsFlowPerf_t |
Flow information. More... | |
class | TestCase |
encapsulates test code More... | |
struct | TestCaseFailure |
class | TestRandomStream |
class | TestRunner |
A runner to execute tests. More... | |
class | TestRunnerImpl |
class | TestSuite |
A suite of tests to run. More... | |
class | TestVectors |
A simple way to store test vectors (for stimulus or from responses) More... | |
class | ThreeBoundFunctorCallbackImpl |
CallbackImpl for functors with first three arguments bound at construction. More... | |
class | ThreeLogDistancePropagationLossModel |
A log distance path loss propagation model with three distance fields. More... | |
class | Time |
Simulation virtual time values and global simulation resolution. More... | |
class | TimeMinMaxAvgTotalCalculator |
Unfortunately, templating the base MinMaxAvgTotalCalculator to operate over Time values isn't straightforward. More... | |
class | Timer |
a simple Timer class More... | |
class | TimerImpl |
struct | TimerImplFive |
struct | TimerImplFour |
struct | TimerImplMemberTraits |
struct | TimerImplMemberTraits< T * > |
struct | TimerImplOne |
struct | TimerImplSix |
struct | TimerImplThree |
struct | TimerImplTwo |
struct | TimerTraits |
class | TimeSeriesAdaptor |
Takes probed values of different types and outputs the current time plus the value with both converted to doubles. More... | |
class | TimeValue |
hold objects of type ns3::Time More... | |
class | TimeWithUnit |
A Time with attached unit, to facilitate output in that unit. More... | |
class | Tlv |
This class implements the Type-Len-Value structure channel encodings as described by "IEEE Standard for
Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems". More... | |
class | TlvValue |
The value field of a tlv can take different values (uint8_t, uint16, vector...). More... | |
class | TopologyReader |
Interface for input file readers management. More... | |
class | TopologyReaderHelper |
Helper class which makes it easier to configure and use a generic TopologyReader. More... | |
class | TosTlvValue |
class | TracedCallback |
forward calls to a chain of CallbackAn ns3::TracedCallback has almost exactly the same API as a normal ns3::Callback but instead of forwarding calls to a single function (as an ns3::Callback normally does), it forwards calls to a chain of ns3::Callback. More... | |
class | TracedValue |
trace classes with value semantics More... | |
class | TraceFadingLossModel |
fading loss model based on precalculated fading traces More... | |
class | TraceSourceAccessor |
control access to objects' trace sources More... | |
class | Trailer |
Protocol trailer serialization and deserialization. More... | |
class | TransmissionModesLayers |
class | TriangularRandomVariable |
The triangular distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically. More... | |
class | TriangularVariable |
Triangularly Distributed random varThis distribution is a triangular distribution. More... | |
class | TriangularVariableImpl |
class | TtaFfMacScheduler |
Implements the SCHED SAP and CSCHED SAP for a Throughput to Average scheduler. More... | |
class | TtaSchedulerMemberCschedSapProvider |
class | TtaSchedulerMemberSchedSapProvider |
class | TwoBoundFunctorCallbackImpl |
CallbackImpl for functors with first two arguments bound at construction. More... | |
class | TwoRayGroundPropagationLossModel |
a Two-Ray Ground propagation loss model ported from NS2 More... | |
class | TxSpectrumModelInfo |
class | TypeId |
a unique identifier for an interface. More... | |
class | TypeIdValue |
hold objects of type ns3::TypeId More... | |
class | U16TlvValue |
class | U32TlvValue |
class | U8TlvValue |
class | UanAddress |
A class used for addressing UAN MAC's. More... | |
class | UanChannel |
Channel class used by UAN devices. More... | |
class | UanHeaderCommon |
Common packet header fields. More... | |
class | UanHeaderRcAck |
Header used for ACK packets by protocol UanMacRc. More... | |
class | UanHeaderRcCts |
CTS header. More... | |
class | UanHeaderRcCtsGlobal |
Cycle broadcast information. More... | |
class | UanHeaderRcData |
Extra data header information. More... | |
class | UanHeaderRcRts |
RTS header. More... | |
class | UanHelper |
UAN configuration helper. More... | |
class | UanMac |
Virtual base class for all UAN MAC protocols. More... | |
class | UanMacAloha |
ALOHA MAC Protocol, the simplest MAC protocol for wireless networks. More... | |
class | UanMacCw |
CW-MAC protocol, similar in idea to the 802.11 DCF with constant backoff window. More... | |
class | UanMacRc |
Non-gateway node MAC for reservation channel MAC protocol. More... | |
class | UanMacRcGw |
Gateway side of RC-MAC. More... | |
class | UanModesList |
Container for UanTxModes. More... | |
class | UanModesListValue |
Attribute Value class for UanTxModes. More... | |
class | UanNetDevice |
Net device for UAN models. More... | |
class | UanNoiseModel |
UAN Noise Model base class. More... | |
class | UanNoiseModelDefault |
Standard ambient acoustic noise model. More... | |
class | UanPacketArrival |
Class consisting of packet arrival information (Time, RxPower, mode, PDP). More... | |
class | UanPdp |
The power delay profile returned by propagation models. More... | |
class | UanPhy |
Base class for UAN Phy models. More... | |
class | UanPhyCalcSinr |
Class used for calculating SINR of packet in UanPhy. More... | |
class | UanPhyCalcSinrDefault |
Default SINR calculator for UanPhyGen. More... | |
class | UanPhyCalcSinrDual |
Default SINR model for UanPhyDual. More... | |
class | UanPhyCalcSinrFhFsk |
WHOI Micromodem like FH-FSK model. More... | |
class | UanPhyDual |
Two channel Phy. More... | |
class | UanPhyGen |
Generic PHY model. More... | |
class | UanPhyListener |
Interface for PHY event listener. More... | |
class | UanPhyPer |
Calculate packet error probability, based on received SINR and modulation (mode). More... | |
class | UanPhyPerGenDefault |
Default Packet Error Rate calculator for UanPhyGen. More... | |
class | UanPhyPerUmodem |
Packet error rate calculation assuming WHOI Micromodem-like PHY. More... | |
class | UanPropModel |
Base class for implemented underwater propagation models. More... | |
class | UanPropModelIdeal |
Ideal propagation model (no pathloss, impulse PDP). More... | |
class | UanPropModelThorp |
Uses Thorp's approximation to compute pathloss. More... | |
class | UanTransducer |
Virtual base for Transducer objects. More... | |
class | UanTransducerHd |
Half duplex implementation of transducer object. More... | |
class | UanTxMode |
Abstraction of packet modulation information. More... | |
class | UanTxModeFactory |
Global database of UanTxMode objects, retrievable by id or name. More... | |
class | Ucd |
Doxygen introspection did not find any typical Config paths. More... | |
class | UcdChannelEncodings |
This class implements the UCD channel encodings as described by "IEEE Standard for
Local and metropolitan area networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems" 11.3.1 UCD channel encodings, page 651. More... | |
class | UdpClient |
A Udp client. More... | |
class | UdpClientHelper |
Create a client application which sends UDP packets carrying a 32bit sequence number and a 64 bit time stamp. More... | |
class | UdpEchoClient |
A Udp Echo client. More... | |
class | UdpEchoClientHelper |
Create an application which sends a UDP packet and waits for an echo of this packet. More... | |
class | UdpEchoServer |
A Udp Echo server. More... | |
class | UdpEchoServerHelper |
Create a server application which waits for input UDP packets and sends them back to the original sender. More... | |
class | UdpHeader |
Packet header for UDP packets. More... | |
class | UdpL4Protocol |
Implementation of the UDP protocol. More... | |
class | UdpServer |
A UDP server, receives UDP packets from a remote host. More... | |
class | UdpServerHelper |
Create a server application which waits for input UDP packets and uses the information carried into their payload to compute delay and to determine if some packets are lost. More... | |
class | UdpSocket |
(abstract) base class of all UdpSockets More... | |
class | UdpSocketFactory |
API to create UDP socket instances. More... | |
class | UdpSocketFactoryImpl |
Object to create UDP socket instances. More... | |
class | UdpSocketImpl |
A sockets interface to UDP. More... | |
class | UdpTraceClient |
Default trace to send. More... | |
class | UdpTraceClientHelper |
Create UdpTraceClient application which sends UDP packets based on a trace file of an MPEG4 stream. More... | |
struct | UeCapabilities_s |
See section 4.3.20 ueCapabilities. More... | |
class | UeManager |
Manages all the radio bearer information possessed by the ENB RRC for a single UE. More... | |
class | UeMemberLteMacSapProvider |
class | UeMemberLteUeCmacSapProvider |
class | UeMemberLteUeCmacSapUser |
class | UeMemberLteUePhySapProvider |
class | UeMemberLteUePhySapUser |
struct | UeSelected_s |
See section 4.3.26 ueSelected. More... | |
class | Uinteger16Probe |
This class is designed to probe an underlying ns3 TraceSource exporting an uint16_t. More... | |
class | Uinteger32Probe |
This class is designed to probe an underlying ns3 TraceSource exporting an uint32_t. More... | |
class | Uinteger8Probe |
This class is designed to probe an underlying ns3 TraceSource exporting an uint8_t. More... | |
class | UintegerValue |
Hold an unsigned integer type. More... | |
struct | UlCqi_s |
See section 4.3.29 ulCQI. More... | |
struct | UlDciListElement_s |
See section 4.3.2 ulDciListElement. More... | |
class | UlDciLteControlMessage |
The Uplink Data Control Indicator messages defines the RB allocation for the users in the uplink. More... | |
struct | UlGrant_s |
Substitutive structure for specifying BuildRarListElement_s::m_grant field. More... | |
struct | UlInfoListElement_s |
See section 4.3.12 ulInfoListElement. More... | |
class | UlJob |
this class implements a structure to compute the priority of service flows More... | |
class | UlMap |
Doxygen introspection did not find any typical Config paths. More... | |
class | UniformDiscPositionAllocator |
Allocate the positions uniformely (with constant density) randomly within a disc. More... | |
class | UniformRandomVariable |
The uniform distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically. More... | |
class | UniformVariable |
The uniform distribution RNG for NS-3. More... | |
class | UniformVariableImpl |
class | UplinkLteGlobalPathlossDatabase |
class | UplinkScheduler |
Virtual class for uplink scheduler. More... | |
class | UplinkSchedulerMBQoS |
This class implements a Migration-based Quality of Service uplink scheduler(MBQoS). More... | |
class | UplinkSchedulerRtps |
This class implements a simple uplink scheduler for rtPS flows. More... | |
class | UplinkSchedulerSimple |
Doxygen introspection did not find any typical Config paths. More... | |
class | V4Ping |
an application which sends one ICMP ECHO request, waits for a REPLYs and reports the calculated RTT. More... | |
class | V4PingHelper |
Create a IPv5 ping application and associate it to a node. More... | |
class | Vector2D |
a 3d vector More... | |
class | Vector2DValue |
hold objects of type ns3::Vector2D More... | |
class | Vector3D |
a 3d vector More... | |
class | Vector3DValue |
hold objects of type ns3::Vector3D More... | |
class | VectorTlvValue |
this class is used to implement a vector of values in one tlv value field More... | |
class | VendorSpecificActionHeader |
See IEEE 802.11-2007 chapter 7.3.1.11 and 7.4.5 also IEEE 802.11p-2010 chapter 7.4.5 Although WifiActionHeader has been defined in wifi mgt-header.h/.cc, it is not a good way to inherit from it or add vendor specific action support. More... | |
class | VendorSpecificContentManager |
struct | VendorSpecificListElement_s |
See section 4.3.3 vendorSpecifiListElement. More... | |
struct | VendorSpecificValue |
Base class for storing the values of vendor specific parameters. More... | |
class | VirtualNetDevice |
A virtual device, similar to Linux TUN/TAP interfaces. More... | |
class | VisualSimulatorImpl |
A replacement simulator that starts the visualizer. More... | |
class | WallClockSynchronizer |
Class used for synchronizing the simulation events to a real-time "wall clock" using Posix Clock functions. More... | |
class | Watchdog |
a very simple watchdog More... | |
class | WaveformGenerator |
Simple SpectrumPhy implementation that sends customizable waveform. More... | |
class | WaveformGeneratorHelper |
class | WaveMacLow |
This class allows higher layer control data rate and tx power level. More... | |
class | Waypoint |
a (time, location) pair. More... | |
class | WaypointMobilityModel |
Waypoint-based mobility model. More... | |
class | WaypointValue |
hold objects of type ns3::Waypoint More... | |
class | WeibullRandomVariable |
The Weibull distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically. More... | |
class | WeibullVariable |
WeibullVariable distributed random varThis class supports the creation of objects that return random numbers from a fixed weibull distribution. More... | |
class | WeibullVariableImpl |
class | Wifi80211pHelper |
helps to create wifi 802.11p objects of WifiNetDevice class More... | |
class | WifiActionHeader |
See IEEE 802.11 chapter 7.3.1.11 Header format: | category: 1 | action value: 1 |. More... | |
class | WifiChannel |
Wifi Channel interface specificationThis class works in tandem with the ns3::WifiPhy class. More... | |
class | WifiHelper |
helps to create WifiNetDevice objects More... | |
class | WifiInformationElement |
Information element, as defined in 802.11-2007 standardThe IEEE 802.11 standard includes the notion of Information Elements, which are encodings of management information to be communicated between STAs in the payload of various frames of type Management. More... | |
class | WifiInformationElementVector |
Information element vectorImplements a vector of WifiInformationElements. More... | |
class | WifiMac |
base class for all MAC-level wifi objects. More... | |
class | WifiMacHeader |
Implements the IEEE 802.11 MAC header. More... | |
class | WifiMacHelper |
create MAC objects More... | |
class | WifiMacQueue |
This queue implements the timeout procedure described in (Section 9.19.2.6 "Retransmit procedures" paragraph 6; IEEE 802.11-2012). More... | |
class | WifiMacTrailer |
Implements the IEEE 802.11 MAC trailer. More... | |
class | WifiMode |
represent a single transmission modeA WifiMode is implemented by a single integer which is used to lookup in a global array the characteristics of the associated transmission mode. More... | |
class | WifiModeFactory |
create WifiMode class instances and keep track of them. More... | |
class | WifiModeValue |
hold objects of type ns3::WifiMode More... | |
class | WifiNetDevice |
Hold together all Wifi-related objects. More... | |
class | WifiPhy |
802.11 PHY layer model More... | |
class | WifiPhyHelper |
create PHY objects More... | |
class | WifiPhyListener |
receive notifications about phy events. More... | |
class | WifiPhyStateHelper |
This objects implements the PHY state machine of the Wifi device. More... | |
class | WifiRadioEnergyModel |
A WiFi radio energy model. More... | |
class | WifiRadioEnergyModelHelper |
Assign WifiRadioEnergyModel to wifi devices. More... | |
class | WifiRadioEnergyModelPhyListener |
A WifiPhy listener class for notifying the WifiRadioEnergyModel of Wifi radio state change. More... | |
struct | WifiRemoteStation |
hold per-remote-station state. More... | |
class | WifiRemoteStationInfo |
Tid independent remote station statistics. More... | |
class | WifiRemoteStationManager |
hold a list of per-remote-station state. More... | |
struct | WifiRemoteStationState |
A struct that holds information about each remote station. More... | |
class | WifiSpectrumModel5MhzInitializer |
class | WifiSpectrumValue5MhzFactory |
Implements WifiSpectrumValue for the 2.4 GHz ISM band only, with a 5 MHz spectrum resolution. More... | |
class | WifiSpectrumValueHelper |
this abstract class defines the interface for interacting with all WifiSpectrumValue implementations. More... | |
class | WifiTxVector |
This class mimics the TXVECTOR which is to be passed to the PHY in order to define the parameters which are to be used for a transmission. More... | |
class | WimaxChannel |
class | WimaxConnection |
class | WimaxHelper |
helps to manage and create WimaxNetDevice objects More... | |
class | WimaxMacQueue |
class | WimaxMacToMacHeader |
this class implements the mac to mac header needed to dump a wimax pcap file The header format was reverse-engineered by looking at existing live pcap traces which could be opened with wireshark i.e., we have no idea where this is coming from. More... | |
class | WimaxNetDevice |
Hold together all Wimax-related objects in a NetDevice. More... | |
class | WimaxPhy |
class | X2CellInfo |
class | X2IfaceInfo |
class | XmlConfigLoad |
class | XmlConfigSave |
class | YansErrorRateModel |
Model the error rate for different modulations. More... | |
class | YansWifiChannel |
A Yans wifi channelThis wifi channel implements the propagation model described in "Yet Another Network Simulator", (http://cutebugs.net/files/wns2-yans.pdf). More... | |
class | YansWifiChannelHelper |
manage and create wifi channel objects for the yans model. More... | |
class | YansWifiPhy |
802.11 PHY layer modelThis PHY implements a model of 802.11a. More... | |
class | YansWifiPhyHelper |
Make it easy to create and manage PHY objects for the yans model. More... | |
class | ZetaRandomVariable |
The zeta distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically. More... | |
class | ZetaVariable |
Zeta Distributed Distributed Random VariableZetaVariable defines a discrete random variable with Zeta distribution. More... | |
class | ZetaVariableImpl |
class | ZipfRandomVariable |
The Zipf distribution Random Number Generator (RNG) that allows stream numbers to be set deterministically. More... | |
class | ZipfVariable |
Zipf Distributed Random VariableZipfVariable defines a discrete random variable with Zipf distribution. More... | |
class | ZipfVariableImpl |
Typedefs | |
typedef std::vector< BandInfo > | Bands |
typedef std::vector< bool > | bvec |
typedef std::map< std::string, LogComponent * > | ComponentList |
typedef std::map< std::string, LogComponent * >::iterator | ComponentListI |
typedef uint8_t | CQI_value |
typedef std::list< Ptr < DataCalculator > > | DataCalculatorList |
List of Ptrs to DataCalculator objects. More... | |
typedef std::vector < std::vector< Ptr < PacketBurst > > > | DlHarqProcessesBuffer_t |
typedef std::vector < DlDciListElement_s > | DlHarqProcessesDciBuffer_t |
typedef std::vector< uint8_t > | DlHarqProcessesStatus_t |
typedef std::vector< uint8_t > | DlHarqProcessesTimer_t |
typedef std::vector< RlcPduList_t > | DlHarqRlcPduListBuffer_t |
typedef std::map < ImsiLcidPair_t, double > | DoubleMap |
typedef std::map< TbId_t, tbInfo_t > | expectedTbs_t |
typedef uint32_t | FlowId |
Abstract identifier of a packet flow. More... | |
typedef std::map < ImsiLcidPair_t, LteFlowId_t > | FlowIdMap |
typedef uint32_t | FlowPacketId |
Abstract identifier of a packet within a flow. More... | |
typedef Callback< void > | GenericPhyRxEndErrorCallback |
This method is used by the PHY to notify the MAC that a previously started RX attempt has terminated without success. More... | |
typedef Callback< void, Ptr < Packet > > | GenericPhyRxEndOkCallback |
This method is used by the PHY to notify the MAC that a previously started RX attempt has been successfully completed. More... | |
typedef Callback< void > | GenericPhyRxStartCallback |
This method is used by the PHY to notify the MAC that a RX attempt is being started, i.e., a valid signal has been recognized by the PHY. More... | |
typedef Callback< void, Ptr < const Packet > > | GenericPhyTxEndCallback |
this method is invoked by the PHY to notify the MAC that the transmission of a given packet has been completed. More... | |
typedef Callback< bool, Ptr < Packet > > | GenericPhyTxStartCallback |
This method allows the MAC to instruct the PHY to start a transmission of a given packet. More... | |
typedef std::vector < HarqProcessInfoElement_t > | HarqProcessInfoList_t |
typedef int | HOL_group |
typedef std::map < InterfacePairIpv4, Ptr < PcapFileWrapper > > | InterfaceFileMapIpv4 |
Ipv4/interface and Pcap file wrapper container. More... | |
typedef std::map < InterfacePairIpv6, Ptr < PcapFileWrapper > > | InterfaceFileMapIpv6 |
Ipv6/interface and Pcap file wrapper container. More... | |
typedef std::pair< Ptr< Ipv4 > , uint32_t > | InterfacePairIpv4 |
Ipv4/interface pair. More... | |
typedef std::pair< Ptr< Ipv6 > , uint32_t > | InterfacePairIpv6 |
Ipv6/interface pair. More... | |
typedef std::map < InterfacePairIpv4, Ptr < OutputStreamWrapper > > | InterfaceStreamMapIpv4 |
Ipv4/interface and output stream container. More... | |
typedef std::map < InterfacePairIpv6, Ptr < OutputStreamWrapper > > | InterfaceStreamMapIpv6 |
Ipv6/interface and output stream container. More... | |
typedef std::map< Ipv4Address, Ptr< Ipv4Route > > | Ipv4RouteMap_t |
Map of Ipv4Address to Ipv4Route. More... | |
typedef void(* | LogNodePrinter )(std::ostream &os) |
typedef void(* | LogTimePrinter )(std::ostream &os) |
typedef Callback< void, LrWpanMacState > | LrWpanMacStateCallback |
This method informs the MAC whether the channel is idle or busy. More... | |
typedef Callback< void, DlInfoListElement_s > | LtePhyDlHarqFeedbackCallback |
This method is used by the LteSpectrumPhy to notify the PHY about the status of a certain DL HARQ process. More... | |
typedef Callback< void > | LtePhyRxCtrlEndErrorCallback |
This method is used by the LteSpectrumPhy to notify the PHY that a previously started RX of a control frame attempt has terminated without success. More... | |
typedef Callback< void, std::list< Ptr < LteControlMessage > > > | LtePhyRxCtrlEndOkCallback |
This method is used by the LteSpectrumPhy to notify the PHY that a previously started RX of a control frame attempt has been successfully completed. More... | |
typedef Callback< void > | LtePhyRxDataEndErrorCallback |
This method is used by the LteSpectrumPhy to notify the PHY that a previously started RX attempt has terminated without success. More... | |
typedef Callback< void, Ptr < Packet > > | LtePhyRxDataEndOkCallback |
This method is used by the LteSpectrumPhy to notify the PHY that a previously started RX attempt has been successfully completed. More... | |
typedef Callback< void, uint16_t, Ptr< SpectrumValue > > | LtePhyRxPssCallback |
This method is used by the LteSpectrumPhy to notify the UE PHY that a PSS has been received. More... | |
typedef Callback< void, Ptr < const Packet > > | LtePhyTxEndCallback |
this method is invoked by the LteSpectrumPhy to notify the PHY that the transmission of a given packet has been completed. More... | |
typedef Callback< void, UlInfoListElement_s > | LtePhyUlHarqFeedbackCallback |
This method is used by the LteSpectrumPhy to notify the PHY about the status of a certain UL HARQ process. More... | |
typedef Callback< void, McpsDataConfirmParams > | McpsDataConfirmCallback |
typedef Callback< void, McpsDataIndicationParams, Ptr < Packet > > | McpsDataIndicationCallback |
typedef std::list< std::pair < std::string, std::string > > | MetadataList |
List of pairs of strings representing metadata. More... | |
typedef std::vector< struct RateInfo > | MinstrelRate |
Data structure for a Minstrel Rate table A vector of a struct RateInfo. More... | |
typedef std::vector< uint32_t > | NixBits_t |
typedef for the nixVector More... | |
typedef std::map< Ipv4Address, Ptr< NixVector > > | NixMap_t |
Map of Ipv4Address to NixVector. More... | |
typedef ObjectPtrContainerValue | ObjectMapValue |
typedef ObjectPtrContainerValue | ObjectVectorValue |
typedef Callback< void, LrWpanPhyEnumeration > | PdDataConfirmCallback |
This method implements the PD SAP: PdDataConfirm. More... | |
typedef Callback< void, uint32_t, Ptr< Packet > , uint8_t > | PdDataIndicationCallback |
This method implements the PD SAP: PdDataIndication. More... | |
typedef Callback< void, LrWpanPhyEnumeration > | PlmeCcaConfirmCallback |
This method implements the PD SAP: PlmeCcaConfirm. More... | |
typedef Callback< void, LrWpanPhyEnumeration, uint8_t > | PlmeEdConfirmCallback |
This method implements the PD SAP: PlmeEdConfirm. More... | |
typedef Callback< void, LrWpanPhyEnumeration, LrWpanPibAttributeIdentifier, LrWpanPhyPibAttributes * > | PlmeGetAttributeConfirmCallback |
This method implements the PD SAP: PlmeGetAttributeConfirm. More... | |
typedef Callback< void, LrWpanPhyEnumeration, LrWpanPibAttributeIdentifier > | PlmeSetAttributeConfirmCallback |
This method implements the PD SAP: PlmeSetAttributeConfirm. More... | |
typedef Callback< void, LrWpanPhyEnumeration > | PlmeSetTRXStateConfirmCallback |
This method implements the PD SAP: PlmeSetTRXStateConfirm. More... | |
typedef int | RBG_index |
typedef std::vector < std::vector< struct RlcPduListElement_s > > | RlcPduList_t |
typedef std::deque< RttHistory > | RttHistory_t |
Container for RttHistory objects. More... | |
typedef std::map < SpectrumModelUid_t, RxSpectrumModelInfo > | RxSpectrumModelInfoMap_t |
typedef std::vector < std::vector< uint32_t > > | SampleRate |
Data structure for a Sample Rate table A vector of a vector uint32_t. More... | |
typedef RngSeedManager | SeedManager |
typedef SequenceNumber < uint16_t, int16_t > | SequenceNumber16 |
16 bit Sequence number More... | |
typedef SequenceNumber < uint32_t, int32_t > | SequenceNumber32 |
32 bit Sequence number More... | |
typedef SequenceNumber < uint8_t, int8_t > | SequenceNumber8 |
typedef std::map < SpectrumModelUid_t, SpectrumConverter > | SpectrumConverterMap_t |
typedef uint32_t | SpectrumModelUid_t |
typedef std::map< CQI_value, LteFlowId_t, bool(*)(uint8_t, uint8_t)>::iterator | t_it_CQIToUE |
typedef std::map< HOL_group, t_map_RBGToCQIsSorted > ::iterator | t_it_HOLGroupToRBGs |
typedef std::map< HOL_group, std::set< LteFlowId_t > >::iterator | t_it_HOLgroupToUEs |
typedef std::map< RBG_index, t_map_CQIToUE >::iterator | t_it_RBGToCQIsSorted |
typedef std::map< CQI_value, LteFlowId_t, bool(*)(uint8_t, uint8_t)> | t_map_CQIToUE |
typedef std::map< HOL_group, t_map_RBGToCQIsSorted > | t_map_HOLGroupToRBGs |
typedef std::multimap < HOL_group, std::set < LteFlowId_t >, bool(*)(int, int)> | t_map_HOLgroupToUEs |
typedef std::map< RBG_index, t_map_CQIToUE > | t_map_RBGToCQIsSorted |
typedef std::map < SpectrumModelUid_t, TxSpectrumModelInfo > | TxSpectrumModelInfoMap_t |
typedef std::map < ImsiLcidPair_t, uint32_t > | Uint32Map |
typedef std::map < ImsiLcidPair_t, Ptr < MinMaxAvgTotalCalculator < uint32_t > > > | Uint32StatsMap |
typedef std::map < ImsiLcidPair_t, uint64_t > | Uint64Map |
typedef std::map < ImsiLcidPair_t, Ptr < MinMaxAvgTotalCalculator < uint64_t > > > | Uint64StatsMap |
typedef std::vector < UlDciListElement_s > | UlHarqProcessesDciBuffer_t |
typedef std::vector< uint8_t > | UlHarqProcessesStatus_t |
typedef std::vector< double > | Values |
typedef Vector3D | Vector |
typedef Vector3DChecker | VectorChecker |
typedef Vector3DValue | VectorValue |
typedef Callback< bool, Ptr < WifiMac >, const OrganizationIdentifier &, Ptr < const Packet >, const Address & > | VscCallback |
typedef uint8_t | WifiInformationElementId |
This type is used to represent an Information Element ID. More... | |
typedef std::vector< uint8_t > | WifiMcsList |
A list of Wi-Fi Modulation and Coding Scheme (MCS). More... | |
typedef WifiMcsList::const_iterator | WifiMcsListIterator |
An iterator for WifiMcsList vector. More... | |
typedef std::vector< WifiMode > | WifiModeList |
In various parts of the code, folk are interested in maintaining a list of transmission modes. More... | |
typedef WifiModeList::const_iterator | WifiModeListIterator |
An iterator for WifiModeList vector. More... | |
Functions | |
int64x64_t | Abs (const int64x64_t &value) |
Absolute value. More... | |
Time | Abs (const Time &time) |
Absolute value function for Time. More... | |
static void | AddPIHeader (uint8_t *&buf, ssize_t &len) |
static void | AsciiLrWpanMacTransmitSinkWithContext (Ptr< OutputStreamWrapper > stream, std::string context, Ptr< const Packet > p) |
static void | AsciiLrWpanMacTransmitSinkWithoutContext (Ptr< OutputStreamWrapper > stream, Ptr< const Packet > p) |
static void | AsciiPhyReceiveSinkWithContext (Ptr< OutputStreamWrapper > stream, std::string context, Ptr< const Packet > p, double snr, WifiMode mode, enum WifiPreamble preamble) |
static void | AsciiPhyReceiveSinkWithoutContext (Ptr< OutputStreamWrapper > stream, Ptr< const Packet > p, double snr, WifiMode mode, enum WifiPreamble preamble) |
static void | AsciiPhyRxOkEvent (std::ostream *os, std::string context, Ptr< const Packet > packet, double snr, UanTxMode mode) |
Ascii trace callback on successful packet reception. More... | |
static void | AsciiPhyTransmitSinkWithContext (Ptr< OutputStreamWrapper > stream, std::string context, Ptr< const Packet > p, WifiMode mode, WifiPreamble preamble, uint8_t txLevel) |
static void | AsciiPhyTransmitSinkWithoutContext (Ptr< OutputStreamWrapper > stream, Ptr< const Packet > p, WifiMode mode, WifiPreamble preamble, uint8_t txLevel) |
static void | AsciiPhyTxEvent (std::ostream *os, std::string context, Ptr< const Packet > packet, double txPowerDb, UanTxMode mode) |
Ascii trace callback on Phy transmit events. More... | |
static uint32_t | AsciiToIpv4Host (char const *address) |
Converts a string representing an IP address into the address. More... | |
static bool | AsciiToIpv6Host (const char *address, uint8_t addr[16]) |
Convert an IPv6 C-string into a 128-bit representation. More... | |
static char | AsciiToLowCase (char c) |
Converts a char to lower case. More... | |
static char | AsciiToLowCase (char c) |
Converts a char to lower case. More... | |
static char | AsciiToLowCase (char c) |
Converts a char to lower case. More... | |
ATTRIBUTE_ACCESSOR_DEFINE (String) | |
ATTRIBUTE_ACCESSOR_DEFINE (Double) | |
ATTRIBUTE_ACCESSOR_DEFINE (Integer) | |
ATTRIBUTE_ACCESSOR_DEFINE (Uinteger) | |
ATTRIBUTE_ACCESSOR_DEFINE (Boolean) | |
ATTRIBUTE_ACCESSOR_DEFINE (Vector) | |
ATTRIBUTE_ACCESSOR_DEFINE (Pointer) | |
ATTRIBUTE_ACCESSOR_DEFINE (RandomVariable) | |
ATTRIBUTE_ACCESSOR_DEFINE (Time) | |
ATTRIBUTE_ACCESSOR_DEFINE (Callback) | |
ATTRIBUTE_CHECKER_DEFINE (String) | |
ATTRIBUTE_CHECKER_DEFINE (Boolean) | |
ATTRIBUTE_CHECKER_DEFINE (RandomVariable) | |
ATTRIBUTE_CHECKER_DEFINE (Callback) | |
ATTRIBUTE_CHECKER_IMPLEMENT (Callback) | |
Attribute checker. More... | |
ATTRIBUTE_CHECKER_IMPLEMENT (RandomVariable) | |
ATTRIBUTE_CHECKER_IMPLEMENT_WITH_NAME (String,"std::string") | |
ATTRIBUTE_CHECKER_IMPLEMENT_WITH_NAME (Boolean,"bool") | |
ATTRIBUTE_HELPER_CPP (Waypoint) | |
ATTRIBUTE_HELPER_CPP (Vector3D) | |
ATTRIBUTE_HELPER_CPP (Vector2D) | |
ATTRIBUTE_HELPER_CPP (Mac64Address) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_CPP (OrganizationIdentifier) | |
ATTRIBUTE_HELPER_CPP (Mac48Address) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_CPP (Mac16Address) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_CPP (Rectangle) | |
ATTRIBUTE_HELPER_CPP (Ssid) | |
ATTRIBUTE_HELPER_CPP (WifiMode) | |
ATTRIBUTE_HELPER_CPP (Box) | |
ATTRIBUTE_HELPER_CPP (Address) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_CPP (DataRate) | |
Macro to make help make data-rate an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_CPP (ObjectFactory) | |
ATTRIBUTE_HELPER_CPP (HtCapabilities) | |
ATTRIBUTE_HELPER_CPP (Ipv4Address) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_CPP (Ipv4Mask) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_CPP (TypeId) | |
ATTRIBUTE_HELPER_CPP (Ipv6Address) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_CPP (Ipv6Prefix) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_HEADER (Waypoint) | |
ATTRIBUTE_HELPER_HEADER (OrganizationIdentifier) | |
ATTRIBUTE_HELPER_HEADER (Ssid) | |
ATTRIBUTE_HELPER_HEADER (Rectangle) | |
ATTRIBUTE_HELPER_HEADER (Vector3D) | |
ATTRIBUTE_HELPER_HEADER (Vector2D) | |
ATTRIBUTE_HELPER_HEADER (Box) | |
ATTRIBUTE_HELPER_HEADER (ObjectFactory) | |
ATTRIBUTE_HELPER_HEADER (Mac16Address) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_HEADER (Mac64Address) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_HEADER (WifiMode) | |
ATTRIBUTE_HELPER_HEADER (DataRate) | |
Macro to make help make data-rate an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_HEADER (Mac48Address) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_HEADER (Address) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_HEADER (Ipv4Address) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_HEADER (Ipv4Mask) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_HEADER (TypeId) | |
ATTRIBUTE_HELPER_HEADER (Ipv6Address) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_HELPER_HEADER (Ipv6Prefix) | |
Macro to make help make class an ns-3 attribute. More... | |
ATTRIBUTE_VALUE_IMPLEMENT (RandomVariable) | |
ATTRIBUTE_VALUE_IMPLEMENT (Time) | |
ATTRIBUTE_VALUE_IMPLEMENT_WITH_NAME (std::string, String) | |
ATTRIBUTE_VALUE_IMPLEMENT_WITH_NAME (uint64_t, Uinteger) | |
ATTRIBUTE_VALUE_IMPLEMENT_WITH_NAME (int64_t, Integer) | |
ATTRIBUTE_VALUE_IMPLEMENT_WITH_NAME (double, Double) | |
void | BreakpointFallback (void) |
fallback breakpoint function More... | |
std::string | BufferToString (uint8_t *buffer, uint32_t len) |
Convert a byte buffer to a string containing a hex representation of the buffer. More... | |
double | CalculateDistance (const Vector3D &a, const Vector3D &b) |
double | CalculateDistance (const Vector2D &a, const Vector2D &b) |
void | cell_data_function_col_0 (GtkTreeViewColumn *col, GtkCellRenderer *renderer, GtkTreeModel *model, GtkTreeIter *iter, gpointer user_data) |
This function includes the name of the object, pointer, vector or vector item in the first column. More... | |
void | cell_data_function_col_0_config_default (GtkTreeViewColumn *col, GtkCellRenderer *renderer, GtkTreeModel *model, GtkTreeIter *iter, gpointer user_data) |
This function writes the attribute or typeid name in the column 0. More... | |
void | cell_data_function_col_1 (GtkTreeViewColumn *col, GtkCellRenderer *renderer, GtkTreeModel *model, GtkTreeIter *iter, gpointer user_data) |
This function includes the name of the attribute or the editable value in the second column. More... | |
void | cell_data_function_col_1_config_default (GtkTreeViewColumn *col, GtkCellRenderer *renderer, GtkTreeModel *model, GtkTreeIter *iter, gpointer user_data) |
This function writes data in the second column, this data is going to be editable if it is a NODE_ATTRIBUTE. More... | |
void | cell_edited_callback (GtkCellRendererText *cell, gchar *path_string, gchar *new_text, gpointer user_data) |
This is the callback called when the value of an attribute is changed. More... | |
void | cell_edited_callback_config_default (GtkCellRendererText *cell, gchar *path_string, gchar *new_text, gpointer user_data) |
This functions is called whenever there is a change in the value of an attribute If the input value is ok, it will be updated in the default value and in the gui, otherwise, it won't be updated in both. More... | |
gboolean | cell_tooltip_callback (GtkWidget *widget, gint x, gint y, gboolean keyboard_tip, GtkTooltip *tooltip, gpointer user_data) |
This function displays the tooltip for an object, pointer, vector item or an attribute. More... | |
gboolean | cell_tooltip_callback_config_default (GtkWidget *widget, gint x, gint y, gboolean keyboard_tip, GtkTooltip *tooltip, gpointer user_data) |
This function is used to display a tooltip whenever the user puts the mouse over a type ID or an attribute. More... | |
static void | CheckEnvironmentVariables (void) |
gboolean | clean_model_callback (GtkTreeModel *model, GtkTreePath *path, GtkTreeIter *iter, gpointer data) |
Delete the tree model contents. More... | |
gboolean | clean_model_callback_config_default (GtkTreeModel *model, GtkTreePath *path, GtkTreeIter *iter, gpointer data) |
Delete the tree model contents. More... | |
template<typename T > | |
Ptr< T > | CompleteConstruct (T *p) |
static bool | ComponentExists (std::string componentName) |
template<typename T1 , typename T2 > | |
Ptr< T1 > | const_pointer_cast (Ptr< T2 > const &p) |
template<typename T1 , typename T2 > | |
Ptr< T1 > | ConstCast (Ptr< T2 > const &p) |
template<typename T > | |
Ptr< T > | Copy (Ptr< T > object) |
template<typename T > | |
Ptr< T > | CopyObject (Ptr< const T > object) |
bool | CqaGroupDescComparator (int key1, int key2) |
bool | CqaKeyDescComparator (uint16_t key1, uint16_t key2) |
bool | CQIValueDescComparator (uint8_t key1, uint8_t key2) |
uint32_t | CRC32Calculate (const uint8_t *data, int length) |
Calculates the CRC-32 for a given input. More... | |
uint8_t | CRC8Calculate (const uint8_t *data, int length) |
template<typename T > | |
Ptr< T > | Create (void) |
template<typename T , typename T1 > | |
Ptr< T > | Create (T1 a1) |
template<typename T , typename T1 , typename T2 > | |
Ptr< T > | Create (T1 a1, T2 a2) |
template<typename T , typename T1 , typename T2 , typename T3 > | |
Ptr< T > | Create (T1 a1, T2 a2, T3 a3) |
template<typename T , typename T1 , typename T2 , typename T3 , typename T4 > | |
Ptr< T > | Create (T1 a1, T2 a2, T3 a3, T4 a4) |
template<typename T , typename T1 , typename T2 , typename T3 , typename T4 , typename T5 > | |
Ptr< T > | Create (T1 a1, T2 a2, T3 a3, T4 a4, T5 a5) |
template<typename T , typename T1 , typename T2 , typename T3 , typename T4 , typename T5 , typename T6 > | |
Ptr< T > | Create (T1 a1, T2 a2, T3 a3, T4 a4, T5 a5, T6 a6) |
template<typename T , typename T1 , typename T2 , typename T3 , typename T4 , typename T5 , typename T6 , typename T7 > | |
Ptr< T > | Create (T1 a1, T2 a2, T3 a3, T4 a4, T5 a5, T6 a6, T7 a7) |
GtkWidget * | create_view (GtkTreeStore *model) |
This is the main view opening the widget, getting tooltips and drawing the tree of attributes... More... | |
GtkWidget * | create_view_config_default (GtkTreeStore *model) |
This is the main view opening the widget, getting tooltips and drawing the tree of attributes. More... | |
template<typename T > | |
Ptr< T > | CreateObject (void) |
template<typename T , typename T1 > | |
Ptr< T > | CreateObject (T1 a1) |
template<typename T , typename T1 , typename T2 > | |
Ptr< T > | CreateObject (T1 a1, T2 a2) |
template<typename T , typename T1 , typename T2 , typename T3 > | |
Ptr< T > | CreateObject (T1 a1, T2 a2, T3 a3) |
template<typename T , typename T1 , typename T2 , typename T3 , typename T4 > | |
Ptr< T > | CreateObject (T1 a1, T2 a2, T3 a3, T4 a4) |
template<typename T , typename T1 , typename T2 , typename T3 , typename T4 , typename T5 > | |
Ptr< T > | CreateObject (T1 a1, T2 a2, T3 a3, T4 a4, T5 a5) |
template<typename T , typename T1 , typename T2 , typename T3 , typename T4 , typename T5 , typename T6 > | |
Ptr< T > | CreateObject (T1 a1, T2 a2, T3 a3, T4 a4, T5 a5, T6 a6) |
template<typename T , typename T1 , typename T2 , typename T3 , typename T4 , typename T5 , typename T6 , typename T7 > | |
Ptr< T > | CreateObject (T1 a1, T2 a2, T3 a3, T4 a4, T5 a5, T6 a6, T7 a7) |
template<typename T > | |
Ptr< T > | CreateObjectWithAttributes (std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue(), std::string n8="", const AttributeValue &v8=EmptyAttributeValue(), std::string n9="", const AttributeValue &v9=EmptyAttributeValue()) |
DEF_TYPE (uint8_t) | |
DEF_TYPE (uint16_t) | |
DEF_TYPE (uint32_t) | |
DEF_TYPE (uint64_t) | |
DEF_TYPE (int8_t) | |
DEF_TYPE (int16_t) | |
DEF_TYPE (int32_t) | |
DEF_TYPE (int64_t) | |
DEF_TYPE (float) | |
DEF_TYPE (double) | |
double | DegreesToRadians (double degrees) |
converts degrees to radians More... | |
gboolean | delete_event_callback (GtkWidget *widget, GdkEvent *event, gpointer user_data) |
Exit the application. More... | |
void | DlRxPduCallback (Ptr< BoundCallbackArgument > arg, std::string path, uint16_t rnti, uint8_t lcid, uint32_t packetSize, uint64_t delay) |
void | DlTxPduCallback (Ptr< BoundCallbackArgument > arg, std::string path, uint16_t rnti, uint8_t lcid, uint32_t packetSize) |
template<typename V , typename T , typename U > | |
Ptr< const AttributeAccessor > | DoMakeAccessorHelperOne (U T::*memberVariable) |
template<typename V , typename T , typename U > | |
Ptr< const AttributeAccessor > | DoMakeAccessorHelperOne (U(T::*getter)(void) const) |
template<typename V , typename T , typename U > | |
Ptr< const AttributeAccessor > | DoMakeAccessorHelperOne (void(T::*setter)(U)) |
template<typename W , typename T , typename U , typename V > | |
Ptr< const AttributeAccessor > | DoMakeAccessorHelperTwo (void(T::*setter)(U), V(T::*getter)(void) const) |
template<typename W , typename T , typename U , typename V > | |
Ptr< const AttributeAccessor > | DoMakeAccessorHelperTwo (V(T::*getter)(void) const, void(T::*setter)(U)) |
template<typename W , typename T , typename U , typename V > | |
Ptr< const AttributeAccessor > | DoMakeAccessorHelperTwo (bool(T::*setter)(U), V(T::*getter)(void) const) |
template<typename W , typename T , typename U , typename V > | |
Ptr< const AttributeAccessor > | DoMakeAccessorHelperTwo (bool(T::*getter)(void) const, void(T::*setter)(U)) |
template<typename T , typename SOURCE > | |
Ptr< const TraceSourceAccessor > | DoMakeTraceSourceAccessor (SOURCE T::*a) |
static double | DoRound (double v) |
template<typename T1 , typename T2 > | |
Ptr< T1 > | DynamicCast (Ptr< T2 > const &p) |
std::string | EmuBufferToString (uint8_t *buffer, uint32_t len) |
Convert a byte buffer to a string containing a hex representation of the buffer. More... | |
bool | EmuStringToBuffer (std::string s, uint8_t *buffer, uint32_t *len) |
Convert string encoded by the inverse function (EmuBufferToString) back into a byte buffer. More... | |
void | exit_clicked_callback (GtkButton *button, gpointer user_data) |
Exit the window when exit button is pressed. More... | |
int | external_rand () |
External Random number generator. More... | |
int | get_col_number_from_tree_view_column (GtkTreeViewColumn *col) |
This function gets the column number 0 or 1 from the mouse click. More... | |
static ComponentList * | GetComponentList (void) |
static SimulatorImpl * | GetImpl (void) |
static std::string | GetNodeIdFromToken (std::string str) |
static int | GetNodeIdInt (ParseResult pr) |
static std::string | GetNodeIdString (ParseResult pr) |
static TypeId | GetObjectIid (void) |
template<typename T > | |
T * | GetPointer (const Ptr< T > &p) |
std::string | GetWildcardMatches (const std::string &configPath, const std::string &matchedPath, const std::string &wildcardSeparator=" ") |
Returns the text matches from the matched path for each of the wildcards in the Config path, separated by the wild card separator. More... | |
uint32_t | Hash32 (const char *buffer, const size_t size) |
Compute 32-bit hash of a byte buffer, using the default hash function. More... | |
uint32_t | Hash32 (const std::string s) |
Compute 32-bit hash of a string, using the default hash function. More... | |
uint64_t | Hash64 (const char *buffer, const size_t size) |
Compute 64-bit hash of a byte buffer, using the default hash function. More... | |
uint64_t | Hash64 (const std::string s) |
Compute 64-bit hash of a string, using the default hash function. More... | |
static bool | HasNodeIdNumber (std::string str) |
double | Integral (const SpectrumValue &arg) |
static void | Ipv4L3ProtocolDropSinkWithContext (Ptr< OutputStreamWrapper > stream, std::string context, Ipv4Header const &header, Ptr< const Packet > packet, Ipv4L3Protocol::DropReason reason, Ptr< Ipv4 > ipv4, uint32_t interface) |
Sync function for IPv4 dropped packet - Ascii output. More... | |
static void | Ipv4L3ProtocolDropSinkWithoutContext (Ptr< OutputStreamWrapper > stream, Ipv4Header const &header, Ptr< const Packet > packet, Ipv4L3Protocol::DropReason reason, Ptr< Ipv4 > ipv4, uint32_t interface) |
Sync function for IPv4 dropped packet - Ascii output. More... | |
static void | Ipv4L3ProtocolRxSinkWithContext (Ptr< OutputStreamWrapper > stream, std::string context, Ptr< const Packet > packet, Ptr< Ipv4 > ipv4, uint32_t interface) |
Sync function for IPv4 received packet - Ascii output. More... | |
static void | Ipv4L3ProtocolRxSinkWithoutContext (Ptr< OutputStreamWrapper > stream, Ptr< const Packet > packet, Ptr< Ipv4 > ipv4, uint32_t interface) |
Sync function for IPv4 received packet - Ascii output. More... | |
static void | Ipv4L3ProtocolRxTxSink (Ptr< const Packet > p, Ptr< Ipv4 > ipv4, uint32_t interface) |
Sync function for IPv4 packet - Pcap output. More... | |
static void | Ipv4L3ProtocolTxSinkWithContext (Ptr< OutputStreamWrapper > stream, std::string context, Ptr< const Packet > packet, Ptr< Ipv4 > ipv4, uint32_t interface) |
Sync function for IPv4 transmitted packet - Ascii output. More... | |
static void | Ipv4L3ProtocolTxSinkWithoutContext (Ptr< OutputStreamWrapper > stream, Ptr< const Packet > packet, Ptr< Ipv4 > ipv4, uint32_t interface) |
Sync function for IPv4 transmitted packet - Ascii output. More... | |
static void | Ipv6L3ProtocolDropSinkWithContext (Ptr< OutputStreamWrapper > stream, std::string context, Ipv6Header const &header, Ptr< const Packet > packet, Ipv6L3Protocol::DropReason reason, Ptr< Ipv6 > ipv6, uint32_t interface) |
Sync function for IPv6 dropped packet - Ascii output. More... | |
static void | Ipv6L3ProtocolDropSinkWithoutContext (Ptr< OutputStreamWrapper > stream, Ipv6Header const &header, Ptr< const Packet > packet, Ipv6L3Protocol::DropReason reason, Ptr< Ipv6 > ipv6, uint32_t interface) |
Sync function for IPv6 dropped packet - Ascii output. More... | |
static void | Ipv6L3ProtocolRxSinkWithContext (Ptr< OutputStreamWrapper > stream, std::string context, Ptr< const Packet > packet, Ptr< Ipv6 > ipv6, uint32_t interface) |
Sync function for IPv6 received packet - Ascii output. More... | |
static void | Ipv6L3ProtocolRxSinkWithoutContext (Ptr< OutputStreamWrapper > stream, Ptr< const Packet > packet, Ptr< Ipv6 > ipv6, uint32_t interface) |
Sync function for IPv6 received packet - Ascii output. More... | |
static void | Ipv6L3ProtocolRxTxSink (Ptr< const Packet > p, Ptr< Ipv6 > ipv6, uint32_t interface) |
Sync function for IPv6 packet - Pcap output. More... | |
static void | Ipv6L3ProtocolTxSinkWithContext (Ptr< OutputStreamWrapper > stream, std::string context, Ptr< const Packet > packet, Ptr< Ipv6 > ipv6, uint32_t interface) |
Sync function for IPv6 transmitted packet - Ascii output. More... | |
static void | Ipv6L3ProtocolTxSinkWithoutContext (Ptr< OutputStreamWrapper > stream, Ptr< const Packet > packet, Ptr< Ipv6 > ipv6, uint32_t interface) |
Sync function for IPv6 transmitted packet - Ascii output. More... | |
bool | isNaN (double x) |
true if x is NaN More... | |
static bool | IsNumber (const std::string &s) |
static bool | IsSchedMobilityPos (ParseResult pr) |
static bool | IsSchedSetPos (ParseResult pr) |
static bool | IsSetInitialPos (ParseResult pr) |
template<class T > | |
static bool | IsVal (const std::string &str, T &ret) |
template<class T > | |
bool | IsVal (const std::string &str, T &ret) |
void | load_clicked (GtkButton *button, gpointer user_data) |
If the user presses the button load, it will load the config file into memory. More... | |
void | load_clicked_default (GtkButton *button, gpointer user_data) |
If the user presses the button load, it will load the config file into memory. More... | |
SpectrumValue | Log (const SpectrumValue &arg) |
SpectrumValue | Log10 (const SpectrumValue &arg) |
SpectrumValue | Log2 (const SpectrumValue &arg) |
void | LogComponentDisable (char const *name, enum LogLevel level) |
Disable the logging output associated with that log component. More... | |
void | LogComponentDisableAll (enum LogLevel level) |
Disable all logging for all components. More... | |
void | LogComponentEnable (char const *name, enum LogLevel level) |
Enable the logging output associated with that log component. More... | |
void | LogComponentEnableAll (enum LogLevel level) |
Enable the logging output for all registered log components. More... | |
void | LogComponentPrintList (void) |
Print the list of logging messages available. More... | |
LogNodePrinter | LogGetNodePrinter (void) |
LogTimePrinter | LogGetTimePrinter (void) |
void | LogSetNodePrinter (LogNodePrinter printer) |
void | LogSetTimePrinter (LogTimePrinter printer) |
static uint32_t | lookuphash (unsigned char *k, uint32_t length, uint32_t level) |
Get a hash key. More... | |
void | LteSimpleHelperDlRxPduCallback (Ptr< RadioBearerStatsCalculator > rlcStats, std::string path, uint16_t rnti, uint8_t lcid, uint32_t packetSize, uint64_t delay) |
void | LteSimpleHelperDlTxPduCallback (Ptr< RadioBearerStatsCalculator > rlcStats, std::string path, uint16_t rnti, uint8_t lcid, uint32_t packetSize) |
void | LteSimpleHelperUlRxPduCallback (Ptr< RadioBearerStatsCalculator > rlcStats, std::string path, uint16_t rnti, uint8_t lcid, uint32_t packetSize, uint64_t delay) |
void | LteSimpleHelperUlTxPduCallback (Ptr< RadioBearerStatsCalculator > rlcStats, std::string path, uint16_t rnti, uint8_t lcid, uint32_t packetSize) |
template<typename V , typename T1 > | |
Ptr< const AttributeAccessor > | MakeAccessorHelper (T1 a1) |
template<typename V , typename T1 , typename T2 > | |
Ptr< const AttributeAccessor > | MakeAccessorHelper (T1 a1, T2 a2) |
template<typename T > | |
Ptr< const AttributeChecker > | MakeDoubleChecker (void) |
template<typename T > | |
Ptr< const AttributeChecker > | MakeDoubleChecker (double min) |
template<typename T > | |
Ptr< const AttributeChecker > | MakeDoubleChecker (double min, double max) |
template<typename T1 > | |
Ptr< const AttributeAccessor > | MakeEnumAccessor (T1 a1) |
template<typename T1 , typename T2 > | |
Ptr< const AttributeAccessor > | MakeEnumAccessor (T1 a1, T2 a2) |
Ptr< const AttributeChecker > | MakeEnumChecker (int v1, std::string n1, int v2, std::string n2, int v3, std::string n3, int v4, std::string n4, int v5, std::string n5, int v6, std::string n6, int v7, std::string n7, int v8, std::string n8, int v9, std::string n9, int v10, std::string n10, int v11, std::string n11, int v12, std::string n12, int v13, std::string n13, int v14, std::string n14, int v15, std::string n15, int v16, std::string n16, int v17, std::string n17, int v18, std::string n18, int v19, std::string n19, int v20, std::string n20, int v21, std::string n21, int v22, std::string n22) |
EventImpl * | MakeEvent (void(*f)(void)) |
template<typename MEM , typename OBJ > | |
EventImpl * | MakeEvent (MEM mem_ptr, OBJ obj) |
template<typename MEM , typename OBJ , typename T1 > | |
EventImpl * | MakeEvent (MEM mem_ptr, OBJ obj, T1 a1) |
template<typename MEM , typename OBJ , typename T1 , typename T2 > | |
EventImpl * | MakeEvent (MEM mem_ptr, OBJ obj, T1 a1, T2 a2) |
template<typename MEM , typename OBJ , typename T1 , typename T2 , typename T3 > | |
EventImpl * | MakeEvent (MEM mem_ptr, OBJ obj, T1 a1, T2 a2, T3 a3) |
template<typename MEM , typename OBJ , typename T1 , typename T2 , typename T3 , typename T4 > | |
EventImpl * | MakeEvent (MEM mem_ptr, OBJ obj, T1 a1, T2 a2, T3 a3, T4 a4) |
template<typename MEM , typename OBJ , typename T1 , typename T2 , typename T3 , typename T4 , typename T5 > | |
EventImpl * | MakeEvent (MEM mem_ptr, OBJ obj, T1 a1, T2 a2, T3 a3, T4 a4, T5 a5) |
template<typename U1 , typename T1 > | |
EventImpl * | MakeEvent (void(*f)(U1), T1 a1) |
template<typename U1 , typename U2 , typename T1 , typename T2 > | |
EventImpl * | MakeEvent (void(*f)(U1, U2), T1 a1, T2 a2) |
template<typename U1 , typename U2 , typename U3 , typename T1 , typename T2 , typename T3 > | |
EventImpl * | MakeEvent (void(*f)(U1, U2, U3), T1 a1, T2 a2, T3 a3) |
template<typename U1 , typename U2 , typename U3 , typename U4 , typename T1 , typename T2 , typename T3 , typename T4 > | |
EventImpl * | MakeEvent (void(*f)(U1, U2, U3, U4), T1 a1, T2 a2, T3 a3, T4 a4) |
template<typename U1 , typename U2 , typename U3 , typename U4 , typename U5 , typename T1 , typename T2 , typename T3 , typename T4 , typename T5 > | |
EventImpl * | MakeEvent (void(*f)(U1, U2, U3, U4, U5), T1 a1, T2 a2, T3 a3, T4 a4, T5 a5) |
template<typename T > | |
Ptr< const AttributeChecker > | MakeIntegerChecker (void) |
template<typename T > | |
Ptr< const AttributeChecker > | MakeIntegerChecker (int64_t min) |
template<typename T > | |
Ptr< const AttributeChecker > | MakeIntegerChecker (int64_t min, int64_t max) |
template<typename T , typename U > | |
Ptr< const AttributeAccessor > | MakeObjectMapAccessor (U T::*memberContainer) |
template<typename T , typename U , typename INDEX > | |
Ptr< const AttributeAccessor > | MakeObjectMapAccessor (Ptr< U >(T::*get)(INDEX) const, INDEX(T::*getN)(void) const) |
template<typename T , typename U , typename INDEX > | |
Ptr< const AttributeAccessor > | MakeObjectMapAccessor (INDEX(T::*getN)(void) const, Ptr< U >(T::*get)(INDEX) const) |
template<typename T > | |
Ptr< const AttributeChecker > | MakeObjectMapChecker (void) |
template<typename T , typename U , typename INDEX > | |
Ptr< const AttributeAccessor > | MakeObjectPtrContainerAccessor (Ptr< U >(T::*get)(INDEX) const, INDEX(T::*getN)(void) const) |
template<typename T , typename U , typename INDEX > | |
Ptr< const AttributeAccessor > | MakeObjectPtrContainerAccessor (INDEX(T::*getN)(void) const, Ptr< U >(T::*get)(INDEX) const) |
template<typename T > | |
Ptr< const AttributeChecker > | MakeObjectPtrContainerChecker (void) |
template<typename T , typename U > | |
Ptr< const AttributeAccessor > | MakeObjectVectorAccessor (U T::*memberContainer) |
template<typename T , typename U , typename INDEX > | |
Ptr< const AttributeAccessor > | MakeObjectVectorAccessor (Ptr< U >(T::*get)(INDEX) const, INDEX(T::*getN)(void) const) |
template<typename T , typename U , typename INDEX > | |
Ptr< const AttributeAccessor > | MakeObjectVectorAccessor (INDEX(T::*getN)(void) const, Ptr< U >(T::*get)(INDEX) const) |
template<typename T > | |
Ptr< const AttributeChecker > | MakeObjectVectorChecker (void) |
template<typename T > | |
Ptr< AttributeChecker > | MakePointerChecker (void) |
template<typename T , typename BASE > | |
Ptr< AttributeChecker > | MakeSimpleAttributeChecker (std::string name, std::string underlying) |
A simple string-based attribute checker. More... | |
Ptr< const AttributeChecker > | MakeTimeChecker (const Time min, const Time max) |
Helper to make a Time checker with bounded range. More... | |
Ptr< const AttributeChecker > | MakeTimeChecker (void) |
Helper to make an unbounded Time checker. More... | |
Ptr< const AttributeChecker > | MakeTimeChecker (const Time min) |
Helper to make a Time checker with a lower bound. More... | |
template<typename FN > | |
TimerImpl * | MakeTimerImpl (FN fn) |
template<typename FN > | |
TimerImpl * | MakeTimerImpl (IntToType< 0 >, FN fn) |
template<typename FN > | |
TimerImpl * | MakeTimerImpl (IntToType< 1 >, FN fn) |
template<typename FN > | |
TimerImpl * | MakeTimerImpl (IntToType< 2 >, FN fn) |
template<typename FN > | |
TimerImpl * | MakeTimerImpl (IntToType< 3 >, FN fn) |
template<typename FN > | |
TimerImpl * | MakeTimerImpl (IntToType< 4 >, FN fn) |
template<typename FN > | |
TimerImpl * | MakeTimerImpl (IntToType< 5 >, FN fn) |
template<typename FN > | |
TimerImpl * | MakeTimerImpl (IntToType< 6 >, FN fn) |
template<typename MEM_PTR , typename OBJ_PTR > | |
TimerImpl * | MakeTimerImpl (MEM_PTR memPtr, OBJ_PTR objPtr) |
template<typename MEM_PTR , typename OBJ_PTR > | |
TimerImpl * | MakeTimerImpl (IntToType< 0 >, MEM_PTR memPtr, OBJ_PTR objPtr) |
template<typename MEM_PTR , typename OBJ_PTR > | |
TimerImpl * | MakeTimerImpl (IntToType< 1 >, MEM_PTR memPtr, OBJ_PTR objPtr) |
template<typename MEM_PTR , typename OBJ_PTR > | |
TimerImpl * | MakeTimerImpl (IntToType< 2 >, MEM_PTR memPtr, OBJ_PTR objPtr) |
template<typename MEM_PTR , typename OBJ_PTR > | |
TimerImpl * | MakeTimerImpl (IntToType< 3 >, MEM_PTR memPtr, OBJ_PTR objPtr) |
template<typename MEM_PTR , typename OBJ_PTR > | |
TimerImpl * | MakeTimerImpl (IntToType< 4 >, MEM_PTR memPtr, OBJ_PTR objPtr) |
template<typename MEM_PTR , typename OBJ_PTR > | |
TimerImpl * | MakeTimerImpl (IntToType< 5 >, MEM_PTR memPtr, OBJ_PTR objPtr) |
template<typename MEM_PTR , typename OBJ_PTR > | |
TimerImpl * | MakeTimerImpl (IntToType< 6 >, MEM_PTR memPtr, OBJ_PTR objPtr) |
template<typename T > | |
Ptr< const TraceSourceAccessor > | MakeTraceSourceAccessor (T a) |
template<typename T > | |
Ptr< const AttributeChecker > | MakeUintegerChecker (void) |
template<typename T > | |
Ptr< const AttributeChecker > | MakeUintegerChecker (uint64_t min) |
template<typename T > | |
Ptr< const AttributeChecker > | MakeUintegerChecker (uint64_t min, uint64_t max) |
Ptr< const AttributeChecker > | MakeVectorChecker (void) |
int64x64_t | Max (const int64x64_t &a, const int64x64_t &b) |
Maximum. More... | |
Time | Max (const Time &ta, const Time &tb) |
Max function for Time. More... | |
int64x64_t | Min (const int64x64_t &a, const int64x64_t &b) |
Minimum. More... | |
Time | Min (const Time &ta, const Time &tb) |
Min function for Time. More... | |
static void | NodePrinter (std::ostream &os) |
double | Norm (const SpectrumValue &x) |
Time | Now (void) |
create an ns3::Time instance which contains the current simulation time. More... | |
static bool | NS_UNUSED_GLOBAL (g_TimeStaticInit) |
Force static initialization of Time. More... | |
int64x64_t | operator! (const int64x64_t &lhs) |
Logical not operator. More... | |
template<typename T > | |
TracedValue< T > | operator! (const TracedValue< T > &lhs) |
bool | operator!= (const Cid &lhs, const Cid &rhs) |
bool | operator!= (const EventId &a, const EventId &b) |
bool | operator!= (const UanAddress &a, const UanAddress &b) |
Address comparison, unequal. More... | |
bool | operator!= (const Scheduler::EventKey &a, const Scheduler::EventKey &b) |
bool | operator!= (const int64x64_t &lhs, const int64x64_t &rhs) |
Inequality operator. More... | |
bool | operator!= (const Mac16Address &a, const Mac16Address &b) |
bool | operator!= (const Mac64Address &a, const Mac64Address &b) |
template<typename T , typename U > | |
bool | operator!= (const TracedValue< T > &lhs, const TracedValue< U > &rhs) |
template<typename T , typename U > | |
bool | operator!= (const TracedValue< T > &lhs, const U &rhs) |
bool | operator!= (const Ipv4InterfaceAddress &a, const Ipv4InterfaceAddress &b) |
template<typename T , typename U > | |
bool | operator!= (const U &lhs, const TracedValue< T > &rhs) |
template<typename T1 , typename T2 > | |
bool | operator!= (Ptr< T1 > const &lhs, T2 const *rhs) |
template<typename T1 , typename T2 > | |
bool | operator!= (T1 const *lhs, Ptr< T2 > &rhs) |
bool | operator!= (const OrganizationIdentifier &a, const OrganizationIdentifier &b) |
template<typename T1 , typename T2 > | |
bool | operator!= (Ptr< T1 > const &lhs, Ptr< T2 > const &rhs) |
bool | operator!= (const Address &a, const Address &b) |
bool | operator!= (const Mac48Address &a, const Mac48Address &b) |
bool | operator!= (const Ipv6InterfaceAddress &a, const Ipv6InterfaceAddress &b) |
bool | operator!= (const Ipv4Address &a, const Ipv4Address &b) |
Not equal to operator. More... | |
bool | operator!= (TypeId a, TypeId b) |
bool | operator!= (Ipv4Mask const &a, Ipv4Mask const &b) |
Not equal to operator. More... | |
bool | operator!= (const Ipv6Address &a, const Ipv6Address &b) |
bool | operator!= (const Ipv6Prefix &a, const Ipv6Prefix &b) |
bool | operator!= (const Time &lhs, const Time &rhs) |
template<typename R , typename T1 , typename T2 , typename T3 , typename T4 , typename T5 , typename T6 , typename T7 , typename T8 , typename T9 > | |
bool | operator!= (Callback< R, T1, T2, T3, T4, T5, T6, T7, T8, T9 > a, Callback< R, T1, T2, T3, T4, T5, T6, T7, T8, T9 > b) |
Inequality test. More... | |
template<typename T , typename U > | |
TracedValue< T > | operator% (const TracedValue< T > &lhs, const TracedValue< U > &rhs) |
template<typename T , typename U > | |
TracedValue< T > | operator% (const TracedValue< T > &lhs, const U &rhs) |
template<typename T , typename U > | |
TracedValue< T > | operator% (const U &lhs, const TracedValue< T > &rhs) |
template<typename T , typename U > | |
TracedValue< T > & | operator%= (TracedValue< T > &lhs, const U &rhs) |
template<typename T , typename U > | |
TracedValue< T > | operator& (const TracedValue< T > &lhs, const TracedValue< U > &rhs) |
template<typename T , typename U > | |
TracedValue< T > | operator& (const TracedValue< T > &lhs, const U &rhs) |
template<typename T , typename U > | |
TracedValue< T > | operator& (const U &lhs, const TracedValue< T > &rhs) |
template<typename T , typename U > | |
TracedValue< T > & | operator&= (TracedValue< T > &lhs, const U &rhs) |
int64x64_t | operator* (const int64x64_t &lhs, const int64x64_t &rhs) |
Multiplication operator. More... | |
double | operator* (const DataRate &lhs, const Time &rhs) |
Multiply datarate by a time value. More... | |
double | operator* (const Time &lhs, const DataRate &rhs) |
Multiply time value by a data rate. More... | |
template<typename T , typename U > | |
TracedValue< T > | operator* (const TracedValue< T > &lhs, const TracedValue< U > &rhs) |
template<typename T , typename U > | |
TracedValue< T > | operator* (const TracedValue< T > &lhs, const U &rhs) |
template<typename T , typename U > | |
TracedValue< T > | operator* (const U &lhs, const TracedValue< T > &rhs) |
SpectrumValue | operator* (const SpectrumValue &lhs, const SpectrumValue &rhs) |
SpectrumValue | operator* (const SpectrumValue &lhs, double rhs) |
SpectrumValue | operator* (double lhs, const SpectrumValue &rhs) |
Time | operator* (const Time &lhs, const int64_t &rhs) |
Time | operator* (const int64_t &lhs, const Time &rhs) |
template<typename T , typename U > | |
TracedValue< T > & | operator*= (TracedValue< T > &lhs, const U &rhs) |
int64x64_t & | operator*= (int64x64_t &lhs, const int64x64_t &rhs) |
Compound multiplication operator. More... | |
int64x64_t | operator+ (const int64x64_t &lhs, const int64x64_t &rhs) |
Addition operator. More... | |
template<typename T , typename U > | |
TracedValue< T > | operator+ (const TracedValue< T > &lhs, const TracedValue< U > &rhs) |
template<typename T , typename U > | |
TracedValue< T > | operator+ (const TracedValue< T > &lhs, const U &rhs) |
template<typename T , typename U > | |
TracedValue< T > | operator+ (const U &lhs, const TracedValue< T > &rhs) |
int64x64_t | operator+ (const int64x64_t &lhs) |
Unary plus operator. More... | |
SpectrumValue | operator+ (const SpectrumValue &lhs, const SpectrumValue &rhs) |
SpectrumValue | operator+ (const SpectrumValue &lhs, double rhs) |
SpectrumValue | operator+ (double lhs, const SpectrumValue &rhs) |
template<typename T > | |
TracedValue< T > | operator+ (const TracedValue< T > &lhs) |
SpectrumValue | operator+ (const SpectrumValue &rhs) |
Time | operator+ (const Time &lhs, const Time &rhs) |
template<typename T , typename U > | |
TracedValue< T > & | operator+= (TracedValue< T > &lhs, const U &rhs) |
int64x64_t & | operator+= (int64x64_t &lhs, const int64x64_t &rhs) |
Compound addition operator. More... | |
Time & | operator+= (Time &lhs, const Time &rhs) |
int64x64_t | operator- (const int64x64_t &lhs, const int64x64_t &rhs) |
Subtraction operator. More... | |
template<typename T , typename U > | |
TracedValue< T > | operator- (const TracedValue< T > &lhs, const TracedValue< U > &rhs) |
template<typename T , typename U > | |
TracedValue< T > | operator- (const |